Palatal root endodontic microsurgery in maxillary molars using the palatal approach: a case study.

BACKGROUND: In clinical practice, the buccal approach is typically the primary choice for endodontic microsurgery. Owing to the thickness of the buccal bone plate, the distance between the buccal bone plate and palatal lesion location, and soft tissue traction, the palatal approach may be more suitable for microsurgery for apical periodontitis of the palatal roots of the maxillary molars. However, the length of the palatal root, location of the greater palatine artery (GPA) and foramen (GPF), and surgical field of observation make palatal surgery challenging. CASE PRESENTATION: With the aid of Cone-beam computed tomography imaging, the palatal approach was successfully applied in nine cases of endodontic microsurgery of the palatal root of a maxillary molar with a periapical lesion in Hangzhou Stomatology Hospital from January to December 2022. CONCLUSIONS: Complete healing was assessed based on clinical symptoms and radiographic images at the 3- and 24-month follow-up visits in all nine cases. Several tips have been proposed including surgical positioning, incision design, palate flap modification, bone removal, and root-end resection.

Postoperative pain after total pulpotomy and root canal treatment in mature molars according to the new and traditional classifications of pulpitis: a prospective, randomized controlled trial.

BACKGROUND: The aim of this study was to compare postoperative pain following total pulpotomy (TP) and root canal treatment (RCT) in mature molar teeth with irreversible pulpitis. To compare the traditional pulpitis classification system with the Wolters system in evaluating postoperative pain. METHODS: Eighty mandibular molars with irreversible pulpitis were included and classified according to the Wolters (moderate/severe pulpitis). The teeth were randomly assigned to two groups (RCT or TP). RCT was performed following standardized protocols. TP was performed to the level of the canal orifices, and hemostasis was achieved with 2.5% sodium hypochlorite. A 3 mm layer of MTA was placed as the pulpotomy material. The teeth were restored with glass ionomer cement followed by composite. Pain scores were recorded preoperatively and, at 6, 12, 24, 48, and 72 h and 7 days after the interventions. The data were statistically analyzed using the Mann-Whitney U test, the Friedman test, the Wilcoxon signed-rank test, and the Spearman's correlation test. The significance level was set at 0.05. RESULTS: Sixty-four patients were analyzed at the one-week follow-up and all were diagnosed as irreversible pulpitis according to the AAE; 22 teeth were classified as moderate and 42 teeth were classified as severe pulpitis according to Wolters. There was no significant difference between TP and RCT in pain scores in moderate pulpitis patients (p > 0.05). There was a significant difference between TP and RCT at 24 and 72 h of severe pulpitis; higher pain scores were observed in the RCT (p < 0.05). CONCLUSIONS: In patients with moderate pulpitis, the TP procedure allowed symptom relief more quickly than RCT. In patients with severe pulpitis, TP provided for significantly lower pain scores compared to RCT at both 24 and 72 h. CLINICAL TRIAL REGISTRATION: The study was retrospectively registered with ClinicalTrials.gov (NCT05923619). Date of Registration: 06/16/23.

Comparative evaluation of clinical efficacy and volumetric changes in pulpectomized primary molars using hand K-file, ProTaper rotary file, and Kedo-SG blue file: an in-vitro cone beam computed tomography analysis.

The accomplishment of a successful pulpectomy depends on multiple factors that involve targeted removal of the causative irritants and soft and hard tissue debris by mechanical and chemical means. Compare and evaluate the efficacy of canal preparation and volumetric filling using conventional files and two rotary file systems using cone beam computed tomography (CBCT). Thirty freshly extracted human primary second molars were randomly divided into three groups of 10 teeth each. After access opening and working length determination, pre-operative volume analysis was done using CBCT. The canals were then instrumented by either hand K-files, ProTaper rotary files or Kedo-SG Blue rotary files. Post-operative volume analysis was performed using CBCT. All the canals were obturated using Metapex and scanned again using CBCT. Mean values of the pre- and post-operative canal volumes were analyzed using one-way Analysis of Variance (ANOVA). Inter- and intra-group volumetric changes were analyzed statistically using a post hoc test. The mean difference in volume after canal preparation and obturation was the highest in the Kedo-SG Blue group, followed by the ProTaper group and the least in the hand K group (p = 0.001). Inter-group comparison showed statistically significant differences between the hand K group and ProTaper group (p = 0.001), the ProTaper group and Kedo-SG Blue group (p = 0.001), and the hand-K group and Kedo-SG Blue group (p = 0.02). The volume of preparation and obturation was the highest using Kedo-SG Blue, followed by the ProTaper file systems.

Optical microscopy evaluation of root canal filling removal by beginner operators in posterior teeth.

This study analyzed the effectiveness of root canal filling removal in lower molars performed by beginner operators using optical microscopy. A total of 55 mandibular first and second molars with mesial roots exhibiting an average curvature of 10-20° were selected based on preoperative radiographs. Instrumentation was done with ProTaper Gold (Dentsply Sirona) up to F2 (25/.08), using 2ml of 2.5% NaOCl irrigation solution after each file. Root canal obturation was performed using gutta-percha points with cold lateral condensation and Sealapex (Kerr Dental). Coronal fillings were made with composite resin and stored in distilled water for two years. Removal of the root canal fillings was performed with AF Retreatment Rotary (AFRR) and AF Blue R3 (AFBR3) (Fanta Dental Materials) under reciprocating motion with 2.5% NaOCl irrigation. Cross-sections of the coronal, middle, and apical thirds were analyzed at 40x magnification using a STEINDORFF POL microscope with a digital camera. Image analysis was conducted using Image J software, version 1.54, to determine the efficiency of root canal filling removal by percentage. Statistical analysis via one-way ANOVA revealed significant differences between distal and mesial roots (P < 0.05). Specifically, for mesial roots, the removal efficiency was 70.65% in the coronal third, 54.66% in the middle third, and 21.32% in the apical third. Significant difficulties were noted due to fractured files, calcifications, and debris accumulation in the isthmuses. The study concluded that the protocol using Fanta files demonstrated significant differences in removal efficiency correlated with root curvature, compounded by the inexperience of beginner operators. The findings highlight the challenges faced by novice practitioners in achieving effective root canal filling removal.

Orthodontic Analysis behind the Extraction of Hypomineralised First Molars.

This chapter will discuss the orthodontic perspective of extractions of compromised first permanent molars (cFPMs) due to hypomineralisation. The context behind the diagnosis of a poor prognosis of cFPM that would support the planning of extractions will be presented. In addition, the ideal timing for interceptive extraction of cFPM as well as the favorable and unfavorable orthodontic scenarios for extractions in the permanent dentition will be discussed.

Clinical and histological efficacy of a new implant surface in achieving early and stable osseointegration: An in vivo study.

An advantage of treated implant surfaces is their increased degree of hydrophilicity and wettability compared with untreated, machined, smooth surfaces that are hydrophobic. The present preclinical in vivo study aimed to compare the two implant surface types, namely SLActive (Straumann, Basel, Switzerland) and nanohydroxyapatite (Hiossen, Englewood Cliffs, NJ, USA), in achieving early osseointegration. The authors hypothesised that the nanohydroxyapatite surface is comparable to SLActive for early bone-implant contact. Six male mixed foxhounds underwent mandibular premolar and first molar extraction, and the sockets healed for 42 days. The mandibles were randomised to receive implants with either SLActive (control group) or nanohydroxyapatite surfaces (test group). A total of 36 implants were placed in 6 animals, and they were sacrificed at 2 weeks (2 animals), 4 weeks (2 animals) and 6 weeks (2 animals) after implant surgery. When radiographic analysis was performed, the difference in bone level between the two groups was statistically significant at 4 weeks (P = 0.024) and 6 weeks (P = 0.008), indicating that the crestal bone level was better maintained for the test group versus the control group. The bone-implant contact was also higher for the test group at 2 (P = 0.012) and 4 weeks (P = 0.011), indicating early osseointegration. In conclusion, this study underscored the potential of implants with nanohydroxyapatite surfaces to achieve early osseointegration.

Polyetheretherketone split post and core for restoration of multirooted molar with insufficient dental tissue remnants by digital techniques: a case report and 3-year follow up.

BACKGROUND: Multi-rooted teeth with extensive dental defects often face challenges in stability and biomechanical failure. High-performance polymer PEEK materials, with properties closer to dentin, show promise in reducing stress concentration and preserving tooth structure. This report aimed to explore the use of a highly retentive polyetheretherketone (PEEK) for manufacturing custom-made split post and core for the restoration of grossly destroyed endodontically treated molars. CLINICAL CONSIDERATIONS: A 40-year-old female patient presented with complaints of loss of tooth substance in the posterior mandibular tooth. This case involved the digital design and fabrication of PEEK split post and core to restore multirooted molar with insufficient dental tissue remnants. The restorations were evaluated over a 3-year follow-up using the World Federation criteria (FDI). The restoration was clinically evaluated through intraoral examination, radiographic assessment, and subjective patient satisfaction, and was deemed clinically good according to FDI criteria. CONCLUSION: The outstanding mechanical properties of PEEK, coupled with the structure of the split post, provide an effective treatment option for weakened multirooted teeth. Simultaneously, the restoration configuration effectively addressed the challenge of varying postinsertion directions, and the interlocking mechanism between the primary and auxiliary posts enhanced the stability of the post and core.

Efficacy of topical tranexamic acid soaked absorbable gelfoam in relieving post-extraction pain in warfarin patients: a randomized, triple-blinded, split-mouth, active-controlled clinical trial.

BACKGROUND: Warfarin patients who need dental extraction face the problem of bleeding and no sufficient hemostasis results in dry socket and postoperative pain. This study aimed to evaluate and compare the efficacy of the topical application of tranexamic acid-soaked absorbable Gelfoam (TXA-Gel) and saline-soaked absorbable Gelfoam (saline-Gel) in relieving postoperative pain following bilateral simple extraction of permanent mandibular molars in warfarin patients. METHODS: This was a randomized, triple-blinded, split-mouth, active-controlled clinical trial. It was performed at the Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Damascus University, between November 2021 and October 2023. 60 bilateral permanent mandibular molars, which were indicated for simple extraction in 30 warfarin patients randomly assigned into two groups according to the topical hemostatic agents after extraction used: Group 1: control group, saline-Gel (n = 30). Group 2: TXA-Gel (n = 30). A simple randomization method was performed by flipping a coin. The primary outcome measure was the visual analogue scale (VAS). The intensity of pain was evaluated at the baseline (t0), and on the 1st (t1), 2nd (t2), 3rd (t3), 4th (t4), 5th (t5), 6th (t6), and 7th (t7) days following extraction. The Kolmogorov-Smirnov test and the Mann-Whitney U test were performed. The level of significance was set at 0.05 (p < 0.05). RESULTS: The mean vas scores was 4.17 ± 1.76 at t1 and decreased to 0.73 ± 0.78 at t7 in the TXA-Gel group. However, in the Gelfoam group, the mean vas scores was 4.83 ± 2.18 at t1 and decreased to 1.80 ± 1.00 at t7. The results of the Mann-Whitney U test showed that there was no statistically significant difference between the two groups at t1 (p = 0.236) and t2 (p = 0.155). However, there was a statistically significance difference at the rest time points (p < 0.05). CONCLUSIONS: TXA-Gel played a prominent role in alleviating post-extraction pain in warfarin patients. TRIAL REGISTRATION: The trail was retrospectively registered at the ISRCTN registry (ISRCTN71901901).

Homemade CAD-CAM surgical guide for palatal mini-screw insertion for maxillary molar distalization providing anchorage. A two times original protocol / Pose de mini-vis palatines par chirurgie guidée à l'aide d'un guide CFAO in-office. Description d'un protocole original en deux temps.

Introduction: Temporary Anchorage Devices have revolutionized our approach to anchorage management. However, their placement may carry risks, such as root perforation, damage to the periodontal ligament, buccal-nasal communication, etc. The aim of this article is to describe an original protocol in two times for the placement of a palatal mini-screw through guided surgery using a guide created by Computer-Aided Design and Manufacturing (CAD/CAM) followed by the transfer of placement information to the laboratory for the fabrication of a Custom Medical Device (CMD) for distalization. Materials and Methods: A two-stage protocol is described and illustrated step by step. Phase 1 comprises 7 steps (including superimposition of maxillary cast and profile teleradiography, surgical tray design), followed by phase 2, which involves 3 final steps (including production of impression for laboratory, production of laboratory model with transfer of mini-screw position). Results: Although the position of the mini screws remains precise, a discrepancy between the planning and the intraoral situation exists. The addition of a second step therefore enables the distalization appliance to be fitted precisely and without pitfalls. Finally, this protocol ensures safe placement, making work easier for the practitioner and, ultimately, for the patient. Conclusion: In a two-stage process, the placement of palatal mini screws through guided surgery using a guide created by CAD/CAM followed by the transfer of this information to the laboratory for the fabrication of a CMD for distalization proves to be a relevant approach.

Introduction: Les dispositifs d'ancrage temporaires ont révolutionné notre vision de la gestion de l'ancrage. En revanche, leur mise en place peut comporter certains risques (perforation radiculaire, communication bucco-nasale, lésions vasculaires…). Cet article vise à décrire un protocole original, en deux temps, de pose de mini-vis palatine par chirurgie guidée à l'aide d'un guide réalisé par conception et fabrication assistée par ordinateur (CFAO) in-office suivie du transfert des informations de pose au laboratoire pour la confection d'un appareil de distalisation. Matériel et méthodes: Un protocole en deux temps est décrit pas à pas. Le temps 1 comprend sept étapes (dont le placement virtuel des mini-vis et la création de la gouttière chirurgicale), suivi du temps 2 qui implique trois étapes (dont la réalisation de l'empreinte pour le laboratoire et l'élaboration du modèle de laboratoire avec transfert de la position des mini-vis). Résultats: Bien que la pose puisse être considérée comme précise, une différence existe entre la planification et la situation clinique. L'apport d'un second temps améliore l'adaptation de l'appareil de distalisation. Enfin, ce protocole offre une pose sécurisée et apporte ainsi un confort de travail pour le praticien et, in fine, pour le patient. Conclusion: Réalisée en deux temps, la pose de mini-vis palatine par chirurgie guidée à l'aide d'un guide réalisé par CFAO in-office suivie du transfert de cette information au laboratoire pour la confection d'un appareil de distalisation s'avère être une approche pertinente.

Treatment of deep gingival recession in homologous molars using a modified laterally positioned flap and subepithelial connective tissue graft: a case report.

This case report describes the use of the modified laterally positioned flap (LPF) technique associated with a subepithelial connective tissue graft (SCTG) for root coverage of homologous mandibular molars with deep gingival recession (GR). A 25-year-old woman with deep GR affecting the mandibular right and left second molars (teeth 31 and 18, respectively) reported bilateral dentinal hypersensitivity. The defect in tooth 31 was 5 mm deep and 4 mm wide. In tooth 18, the defect was 6 mm deep and 5 mm wide. There was 1 mm of keratinized tissue at tooth 31, and no keratinized tissue was present at tooth 18. The modified LPF-SCTG technique with mesial to distal positioning of the flap was selected to treat the defects. The flap was modified by a submarginal incision in the tooth farthest from the GR to preserve the integrity of the donor site. One year postsurgery, tooth 31 had 80.0% coverage, a 66.6% gain in clinical attachment, and a 5-mm increase in keratinized tissue width. Tooth 18 had 83.3% root coverage, a 71.4% gain in clinical attachment, and a 5-mm increase in keratinized tissue width. The patient's complaints of hypersensitivity were resolved, and the tissue gain provided better access and more comfort during cleaning of the teeth. The flap donor sites demonstrated no clinical signs of GR. Based on the 1-year follow-up assessments, the modified LPF-SCTG technique was effective for the treatment of deep single-tooth GR in mandibular molars without causing adverse affects on the flap donor sites.

Digital technology-assisted extraction of impacted maxillary third molar located between the furcation of maxillary second molar by root dislocation: a case report.

Most of the maxillary impacted third molars are located in the maxillary tuberosity, where the vision and operation space are limited. This paper reports a case of surgical extraction of the left maxillary horizontal superhigh impacted third molar, which is located between the roots of the adjacent teeth and is closely related to the maxillary sinus. The digital simulation technology was used to reconstruct a three-dimensional visual image of the patient's maxilla, related teeth, and other adjacent anatomical structures to assist in finding the optimal surgical method accurately. Root dislocation before the crown not only protects the roots of the adjacent tooth, but also reduces the risk of maxillary sinus lining damage or perforation during operative procedures, improves the efficiency of the operation, and reduces surgical trauma, which conforms to the concept of minimally invasive surgery and provides a new idea and experience for the clinical extraction of such maxillary impacted third molars.

Evaluation of dentin features in teeth after caries removal by three techniques (chemomechanical, mechanical with a smart bur, and air-abrasion): an in vitro study.

Background: Different methods for removing dental carious lesions exist, including conventional rotary caries removal and new advanced technology like polymer-based burs, chemomechanical agents, air abrasion, and laser. Objectives: This study shows the differences in features of dentin (smear layer, patency of dentinal tubules, surface irregularities, intertubular micro porosities, and exposed dentinal tubules) among different types of caries removal techniques. Materials and Methods: An in vitro study was done on 60 primary molars with occlusal class I active caries. Teeth were divided into three groups according to a method of caries removal (G1: chemomechanical, G2: mechanical with a smart bur, and G3: air-abrasion). After complete caries excavation, the teeth were examined under a scanning electronic microscope (SEM) with the power of magnification 4,000x and 8,000x to show the morphological dentinal features with SEM microphotographs. Data obtained was analyzed using the SPSS program where Fisher exact, Kruskal-Wallis and multiple Wilcoxon sum rank tests were used. The level of significance is when the p-value is less than 0.05. Results: Generally, SEM showed the highest ratio of score 1 of smear layer presence, surface irregularities, and microporosity in all groups in both magnifications. The patency of tubules showed the highest ratio of score 1 in G1, scores 2 in both G2 and G3 in magnification 4,000x, while 8,000x there was the highest ratio of its score 1 in G1 and G2 while the G3 has score 2 as the highest score. The exposed dentinal tubules showed the highest ratio in G1 in score 3, in G2 in score 2, and in G3 in score 1 in magnification 4,000x, while 8,000x there was the highest ratio of its score 2 in both G1 and G3 while the G3 has highest score 1. The study with magnification 4,000x showed a significant difference (S) among three groups in exposed dentinal tubules with a p-value (0.012), and there was S between chemomechanical and smart, chemomechanical and air-abrasions groups with a p-value (0.041, 0.001 subsequentially). Other dentin features showed non-significant differences (NS) among or between groups in both magnifications (4,000x, 8,000x). Conclusions: All groups were effective in removing caries and can successfully treat young, scared or stressed patients. All methods of caries removal produce clinically parametric changes in the residual dentin.

Bone Augmentation With Alloplastic Graft Material in a Patient Under Bisphosphonate Therapy: A Case Report and Literature Review.

Cases of relatively safe dental implant treatment in patients with low-volume bisphosphonate (BP) have been gradually reported. Although bone augmentation is commonly used when the bone volume is insufficient for implant placement, the studies and case reports regarding the safety of bone augmentation in patients treated with BP remain insufficient. Herein, we report a case wherein bone augmentation was performed after BP treatment with bone healing realized according to imaging, and we review the literature regarding BP and bone augmentation. A 67-year-old Japanese woman requested implant treatment for a hopeless lower right second molar. She had been taking minodronic acid hydrate (50 mg/4 wk) for 18 months to treat steroid-induced osteoporosis. After obtaining informed consent, tooth extraction and bone augmentation within the extraction socket were performed. The tooth was extracted atraumatically to preserve the surrounding alveolar bone, and the extraction socket was intensely curetted. Subsequently, the socket was filled with carbonate apatite granules and covered with a biodegradable membrane, and the wound was sutured without tension. Although protracted wound healing without any symptoms of infection was observed, the wound healed completely. No clinical symptoms were observed, the color of the mucosa at the site was healthy, and imaging findings at 6 months postoperation indicated that osteogenesis had progressed uneventfully.

Brass wire ligation for treatment of the ectopic eruption of the mandibular second molar: a case report.

Ectopic eruption of the second permanent molar is a tooth replacement disorder during adolescence. If not treated in time, it can cause hard tissue of the adjacent first molar resorption, early tooth loss, decreased chewing efficiency, and other serious malocclusions. Timely detection and treatment of ectopic eruption of the second permanent molar are of great significance in preventing malocclusions in adolescents and establishing normal occlusion relationships. However, current case reports on the ectopic eruption of the mandibular second molar are relatively rare and are mostly concentrated on surgical and orthodontic treatments, and long-term follow-up is lacking. This paper reports a case in which brass wire ligation was used to treat ectopic eruption of the mandibular second permanent molar, allowing the permanent teeth to erupt smoothly and establish a normal occlusion. The patient was observed for five years after the operation. The occlusion was stable, and the tooth root development, pulp vitality, and periodontal conditions were normal. This paper provides a clinical approach that is short in treatment duration, simple, and minimally invasive for young mandibular second permanent molars with moderate mesial inclination and partial eruption. This method is of importance in helping children establish physiological occlusion.

Comparison of immediate vs. delayed guided tissue regeneration in Infrabony defect of second molars after adjacent third molar extraction: a retrospective study.

BACKGROUND: The distal aspect of the second molar (d-M2) often exhibits infrabony defects due to the adjacent third molar. Although the defects can be treated by guided tissue regeneration (GTR) after removing the third molar, the optimal timing remains uncertain following third molar removal in clinical decision-making. This study aimed to compare delayed and immediate GTR treatments to assist in clinical decision-making. METHODS: D-M2 infrabony defects with a minimum 1-year follow-up were collected and divided into three groups: Immediate GTR group, which underwent third molar extraction and received GTR simultaneously; Delayed GTR group, which underwent delayed GTR at least 3 months after third molar extraction; and Control group, which underwent only scaling and root planing during third molar extraction. The clinical and radiographic parameters related to the infrabony defect before GTR and post-surgery were evaluated using the Kruskal-Wallis test or one-way ANOVA, followed by post-hoc Dunn's test or the Bonferroni test for pairwise comparisons. RESULTS: A total of 109 d-M2 infrabony defects were assessed. No significant differences were found between the two GTR groups, although both of them showed significant reductions in infrabony defect depth: the immediate GTR group (2.77 ± 1.97 mm vs. 0.68 ± 1.03 mm, p < 0.001) and the delayed GTR group (2.98 ± 1.08 mm vs. 0.68 ± 1.03 mm, p < 0.001) compared to the control group. CONCLUSION: GTR can effectively improve d-M2 infrabony defects when the third molar is removed, whether simultaneously or delayed. Patients may experience less discomfort with immediate GTR treatment as it requires only one surgery.

Immediate Implant Placement with Different Interradicular Osteotomies in the Mandible: A Randomized Clinical Study.

AIM: To assess the implant stability and amount of marginal bone loss in immediate implant placement (IIP) in mandibular molars by using pre-extractive interradicular implant bed preparation vs conventional post-extractive interradicular implant bed preparation. MATERIALS AND METHODS: This randomized clinical trial was conducted on fourteen patients who had an immediate dental implant at the mandibular molar area by two different techniques. All patients were divided randomly into two equal groups: Group I (control) was treated with conventional post-extractive interradicular implant bed preparation, and group II (test) was treated by pre-extractive interradicular implant bed preparation All surgeries were performed by the same surgeon. All patients were followed up clinically at immediate post-surgery (T0), 7 days (T1), 3 weeks (T2), 90 days (T3), and 3 months after loading (T6) for healing and to evaluate the marginal bone loss radiographically at T0, T3 and T6. Descriptive and bivariate statistics were computed using the SPSS version (SPSS, IBM Inc., Chicago, IL), and p ≤ 0.05 was considered an indicator of statistical significance. RESULTS: A total of 7 female and 7 male patients with a mean age of 32.07 ± 5.87 years. Radiographically, there is no significant statistical difference in comparing between two groups for the marginal bone loss. However, there was a highly significant statistical difference (p < 0.001) in each group between different interval periods (T0, T3, T6) with mean start 5.27 ± 0.53, and 5.19 ± 0.72 at (T0) reaching 7.60 ± 0.89 and 7.09 ± 0.96 at (T3) and slightly decrease of 7.52 ± 0.79 and 7.02 ± 0.79 in (T6) with radiographic evaluation, and it represented clinically in each group with mean 3.57 ± 0.313 and 4.0 ± 0.58 at (T0) increase to 6.55 ± 0.395 and 6.52 ± 0.45 at (T6) for both group respectively. There is no statistically significant difference in soft tissue healing with an average mean of 4.57 ± 0.24 and 3.57 ± 0.509 (p = 0.001) when comparing between both groups respectively. CONCLUSION: Both techniques seem useful for dental implant placement in badly decayed mandibular molars. However, pre-extracted interradicular implant bed preparation for IIP might offer advantages in terms of primary implant stability and bone preservation. However, further studies are needed to confirm these findings. CLINICAL SIGNIFICANCE: Both techniques are alternative methods for the treatment of badly decayed mandibular molars by immediate dental implant except for minor complications that do not interfere with dental implant placement. How to cite this article: Alzaibak LMA, Abdel-Monem TM, Elgohary NM, et al. Immediate Implant Placement with Different Interradicular Osteotomies in the Mandible: A Randomized Clinical Study. J Contemp Dent Pract 2024;25(4):303-312.

Additively manufactured custom-made subperiosteal implant rehabilitation for severely atrophic maxillary molar area: A technical note.

Implant-prosthetic rehabilitations of severely atrophic posterior maxillary sectors currently is challenging, often requiring multiple surgeries and long rehabilitation times. Recently, graftless techniques (e.g. zygomatic, pterygoid and nasal implants) have gained popularity as they offer a reduction in rehabilitation time, aligning more closely with patient preferences but may not be feasible for sectorial rehabilitations. Subperiosteal implants, suggested for full-arch rehabilitations of atrophic maxilla, haven't been explored for sectorial rehabilitations. In this report we present the case of a patient with maxillary molar edentulism, rehabilitated with a subperiosteal implant.

The history of treatment planning the extraction of the first permanent molar in the UK.

This paper researches the history of treatment planning for extraction of the first permanent molars and the early influence of American orthodontists on dental practice in the UK. It also discusses the development of clinical guidelines for the enforced extraction of first permanent molars to the present day.

Physiological occlusal force attenuates replacement root resorption of replanted teeth: an experimental animal study.

BACKGROUND: Tooth avulsion represents the most severe form of dental trauma, necessitating tooth replantation as the primary treatment. However, the risk of replacement root resorption (RRR) poses a significant threat to tooth retention following replantation. This study preliminarily aimed to investigate the effect of physiological occlusal force on RRR after the replantation of avulsed teeth and to explore the potential underlying mechanisms. METHODS: Thirty-six 4-week-old male Sprague-Dawley rats underwent extraction and immediate replantation of their left maxillary molars. The rats were randomly divided into two major groups: the occluded (n = 18) group, where the opposite mandibular teeth were preserved; non-occluded (n = 18) group, where the opposite mandibular teeth were extracted. Within each major group, there were three subgroups corresponding to 7 days, 14 days, and 2 months, resulting in a total of six subgroups, (n = 6 per subgroup). The right maxillary first molars served as the normal control. Various periodontal characteristics were assessed using haematoxylin-eosin (H&E), tartrate-resistant acid phosphatase (TRAP) staining, and micro-computed tomography (micro-CT). RESULTS: Histological staining revealed that under occlusal force, the early stage (day 7) after tooth replantation mainly manifested as root surface resorption, especially in the non-occluded group, which gradually diminished over time. Cementum and periodontal ligament (PDL) repair was observed on day 14. Micro-CT analysis indicated a significant decrease in PDL width in the non-occluded group two months after replantation, consistent with the histological findings, signifying severe RRR in the non-occluded group. CONCLUSIONS: This study provides preliminary evidence that physiological occlusal force may attenuate osteoclastogenesis during the early stage of tooth replantation, thereby reducing the occurrence of RRR and promoting periodontal healing.