Structural stability of DNA origami nanostructures in organic solvents.

DNA origami nanostructures have attracted significant attention as an innovative tool in a variety of research areas, spanning from nanophotonics to bottom-up nanofabrication. However, the use of DNA origami is often restricted by their rather limited structural stability in application-specific conditions. The structural integrity of DNA origami is known to be superstructure-dependent, and the integrity is influenced by various external factors, for example cation concentration, temperature, and presence of nucleases. Given the necessity to functionalize DNA origami also with non-water-soluble entities, it is important to acquire knowledge of the structural stability of DNA origami in various organic solvents. Therefore, we herein systematically investigate the post-folding DNA origami stability in a variety of polar, water-miscible solvents, including acetone, ethanol, DMF, and DMSO. Our results suggest that the structural integrity of DNA origami in organic solvents is both superstructure-dependent and dependent on the properties of the organic solvent. In addition, DNA origami are generally more resistant to added organic solvents in folding buffer compared to that in deionized water. DNA origami stability can be maintained in up to 25-40% DMF or DMSO and up to 70-90% acetone or ethanol, with the highest overall stability observed in acetone. By rationally selecting both the DNA origami design and the solvent, the DNA origami stability can be maintained in high concentrations of organic solvents, which paves the way for more extensive use of non-water-soluble compounds for DNA origami functionalization and complexation.

Gas chromatography mass spectrometer determination of dimethylamine impurity in N,N-dimethylformamide solvent by derivatization of N,N-dimethylbenzamide with benzoyl chloride agent.

This study describes the development of a reliable and linear analytical method for precisely determining dimethylamine impurity in N,N-dimethylformamide solvent utilizing a benzoyl chloride derivatization reagent and a gas chromatography mass spectrometer. Benzoyl chloride was used to derivatize dimethylamine. At normal temperature, benzoyl chloride combined with dimethylamine, producing N,N-dimethylbenzamide. This method separated N,N-dimethylbenzamide using Rtx-5 amine (30 m × 0.32 mm × 1.50 µm) as the stationary phase, helium as the carrier gas, argon as the collision gas, and methanol as the diluent. The column flow rate was 2 mL/min. The retention time of N,N-dimethylbenzamide was determined to be 8.5 min. Precision, linearity, and accuracy were tested using ICH Q2 (R2) and USP<1225> guidelines. The percentage coefficient of variation (CV) for N,N-dimethylbenzamide in the system suitability parameter was 1.1%. The correlation coefficient of N,N-dimethylbenzamide was found to be >0.99. In the method precision parameter, the % CV for N,N-dimethylbenzamide was found to be 1.9%, whereas the % CV for N,N-dimethylbenzamide was 1.2% in intermediate precision. The percentage recovery of N,N-dimethylbenzamide was determined to be between 80% and 98%.

Biphasic effects of ethanol consumption on N,N-dimethylformamide-induced liver injury in mice.

N,N-Dimethylformamide (DMF) is a well-documented occupational hazardous material, which can induce occupational liver injury. The current study was designed to investigate whether ethanol consumption can affect DMF-induced hepatotoxicity and the potential underlying mechanisms involved. We found that a single dose of ethanol (1.25, 2.5, or 5 g/kg bw by gavage) significantly repressed the increase in serum alanine transaminase (ALT) and aspartate transaminase (AST) activities and alleviated the liver histopathological changes in mice challenged with 3 g/kg DMF. In contrast, long-term moderate drinking (2.5 g/kg bw) significantly aggravated the repeated DMF (0.7 g/kg bw) exposure-induced increase in the serum ALT and AST activities. Mechanistically, acute ethanol consumption suppressed DMF-induced activation of the NLR family pyrin domain-containing protein 3 (NLRP3) inflammasome, while long-term moderate ethanol consumption promoted hepatocyte apoptosis in the mouse liver. Notably, cytochrome P4502E1 (CYP2E1) protein level and activity in mouse livers were not significantly affected by ethanol per se in the two models. These results confirm that regular drinking can increase the risk of DMF-induced hepatotoxicity, and suggest that DMF-handling workers should avoid consuming ethanol to reduce the risk of DMF-indued liver injury.

Exploring the solubility and intermolecular interactions of biologically significant amino acids l-serine and L-cysteine in binary mixtures of H2O + DMF, H2O + DMSO and H2O + ACN in temperature range from T = 288.15 K to 308.15 K.

In the presented work, a study on the solubility and intermolecular interactions of l-serine and L-cysteine was carried out in binary mixtures of H2O + dimethylformamide (DMF), H2O + dimethylsulfoxide (DMSO), and H2O + acetonitrile (ACN) in the temperature range of T = 288.15 K to 308.15 K. l-serine exhibited the highest solubility in water, while L-cysteine was more soluble in water-DMF. The solvation process was assessed through standard Gibbs energy calculations, indicating the solvation stability order: water-ACN > water-DMSO > water-DMF for l-serine, and water-DMF > water-DMSO > water-ACN for L-cysteine. This study also explored the influence of these amino acids on solvent-solvent interactions, revealing changes in chemical entropies and self-association patterns within the binary solvent mixtures.

N-Butylpyrrolidinone is an equally good solvent as N,N-dimethylformamide for microwave assisted solid phase peptide synthesis.

Solid-phase peptide synthesis (SPPS) is the prevailing method for synthesizing research peptides today. However, SPPS is associated with a significant environmental concern due to the utilization of hazardous solvents such as N,N-dimethylformamide (DMF) or N-methylpyrrolidone, which generate substantial waste. In light of this, our research endeavors to identify more environmentally friendly solvents for SPPS. In this study, we have assessed the suitability of five green solvents as alternatives to DMF in microwave assisted SPPS. The solvents evaluated include Cyrene, ethyl acetate, 1,3-dioxolane, tetrahydro-2-methylfuran, and N-Butylpyrrolidinone (NBP). Our investigation encompassed all stages of the synthesis process, from resin swelling, dissolution of reagents, culminating in the successful synthesis of five diverse peptides, including the challenging ACP 65-74, Peptide 18A, Thymosin α1, and Jung-Redemann peptide. Our findings indicate that NBP emerged as a strong contender, performing on par with DMF in all tested syntheses. Furthermore, we observed that combinations of NBP with either ethyl acetate or tetrahydro-2-methylfuran demonstrated excellent results. This research contributes to the pursuit of more sustainable and environmentally conscious practices in peptide synthesis.

PVP/aprepitant microcapsules produced by supercritical antisolvent process.

The supercritical antisolvent (SAS) process was a green alternative to improve the low bioavailability of insoluble drugs. However, it is difficult for SAS process to industrialize with limited production capacity. A coaxial annular nozzle was used to prepare the microcapsules of aprepitant (APR) and polyvinylpyrrolidone (PVP) by SAS with N, N-Dimethylformamide (DMF) as solvent. Meanwhile, the effects of polymer/drug ratio, operating pressure, operating temperature and overall concentration on particles morphology, mean particle diameter and size distribution were analyzed. Microcapsules with mean diameters ranging from 2.04 µm and 9.84 µm were successfully produced. The morphology, particle size, thermal behavior, crystallinity, drug content, drug dissolution and residual amount of DMF of samples were analyzed. The results revealed that the APR drug dissolution of the microcapsules by SAS process was faster than the unprocessed APR. Furthermore, the drug powder collected every hour is in the kilogram level, verifying the possibility to scale up the production of pharmaceuticals employing the SAS process from an industrial point of view.

Anion-Binding Properties of Short Linear Homopeptides.

A comprehensive thermodynamic and structural study of the complexation affinities of tetra (L1), penta (L2), and hexaphenylalanine (L3) linear peptides towards several inorganic anions in acetonitrile (MeCN) and N,N-dimethylformamide (DMF) was carried out. The influence of the chain length on the complexation thermodynamics and structural changes upon anion binding are particularly addressed here. The complexation processes were characterized by means of spectrofluorimetric, 1H NMR, microcalorimetric, and circular dichroism spectroscopy titrations. The results indicate that all three peptides formed complexes of 1:1 stoichiometry with chloride, bromide, hydrogen sulfate, dihydrogen phosphate (DHP), and nitrate anions in acetonitrile and DMF. In the case of hydrogen sulfate and DHP, anion complexes of higher stoichiometries were observed as well, namely those with 1:2 and 2:1 (peptide:anion) complexes. Anion-induced peptide backbone structural changes were studied by molecular dynamic simulations. The anions interacted with backbone amide protons and one of the N-terminal amine protons through hydrogen bonding. Due to the anion binding, the main chain of the studied peptides changed its conformation from elongated to quasi-cyclic in all 1:1 complexes. The accomplishment of such a conformation is especially important for cyclopeptide synthesis in the head-to-tail macrocyclization step, since it is most suitable for ring closure. In addition, the studied peptides can act as versatile ionophores, facilitating transmembrane anion transport.

Dimethylformamide dimethyl acetal reagent for in situ chiral analyses of organic molecules on Titan with the Dragonfly mass spectrometer space instrument (Dragonfly mission).

Thanks to the Cassini-Huygens space mission between 2004 and 2017, a lot was learned about Titan, the biggest satellite of Saturn, and its intriguing atmosphere, surface, and organic chemistry complexity. However, key questions about the potential for the atmosphere and surface chemistry to produce organic molecules of direct interest for prebiotic chemistry and life did not find an answer. Due to Titan potential as a habitable world, NASA selected the Dragonfly space mission to be launched in 2027 to Titan's surface and explore the Shangri-La surface region for minimum 3 years. One of the main goals of this mission will be to understand the past and actual abundant prebiotic chemistry on Titan, especially using the Dragonfly Mass Spectrometer (DraMS). Two recently used sample pre-treatments for Gas Chromatography - Mass Spectrometry (GC-MS mode of DraMS) analyses are planned prior analysis to extract refractory organic molecules of interest for prebiotic chemistry and astrobiology. The dimethylformamide dimethylacetal (DMF-DMA) derivatization reaction offers undoubtedly an opportunity to detect biosignatures by volatilizing refractory biological or prebiotic molecules and conserving the chiral carbons' conformation while an enantiomeric excess indicates a chemical feature induced primarily by life (and may be aided on the primitive systems by light polarization). The goal of this study is to investigate the ageing of DMF-DMA in DraMS (and likely MOMA) capsules prior to in situ analysis on Titan (or Mars). The main results highlighted by our work on DMF-DMA are first its satisfactory stability for space requirements through time (no significant degradation over a year of storage and less than 30 % of lost under thermal stress) to a wide range of temperature (0 °C to 250 °C), or the presence of water and oxidants during the derivatization reaction (between 0 and 10 % of DMF-DMA degradation). Moreover, this reagent derivatized very well amines and carboxylic acids in high or trace amounts (ppt to hundreds of ppm), conserving their molecular conformation during the heat at 145 °C for 3 min (0 to 4% in the enantiomeric form change).

Core-Shell Double Gyroids Directed by Selective Solvation for ABC Triblock Terpolymers.

The formation of ABC triblock terpolymers through solution casting is still challenging. In this study, core-shell double gyroid network structures are fabricated via solution casting using poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) (F)-b-[poly(4-vinylpyridine) (P4VP) (P)]-b-[polystyrene (PS) (S)] (FPS) triblock terpolymers in N,N-dimethylformamide (DMF). Upon heat treatment, the polymer tends to form a sphere-in-lamellar structure at the F/S interface. Given the solubility properties of each component in DMF, it is anticipated that the effective volume fraction of F relative to P would increase in concentrated solutions and the effective volume fraction of S would decrease. The microphase-separated structure derived from the DMF solution consistently results in the formation of a network structure composed of a core-shell double gyroid, with F as the matrix, P as the shell, and S as the core, and their periodic lengths gradually increase to 110.8, 131.8, and 162.7 nm as increase molecular weights of PS blocks to 13.8, 20.7, and 28.8 kg mol-1. Based on the solubility properties of the polymer components highlighted in this study, the solvent selection strategy is broadly applicable to ABC triblock terpolymers featuring various polymer components, offering a more efficient avenue for fabricating core-shell double gyroid structures.

Comparison of different cryoprotectants for freezing donkey (Equus asinus) semen.

The aim of this study was to evaluate two cryoprotectants, dimethylformamide (DMF) and methylformamide (MF) in two concentrations (5 and 7 %) in vitro in donkey semen using a rapid freezing technique and the effect on pregnancy rates in mares. Twenty-four ejaculates from 8 jacks (n = 8; r = 3) were divided into 4 extenders: BotuSemen Gold with 5 % or 7 % MF and 5 % or 7 % DMF, all containing 11 % lactose, 20 % egg-yolk and 0.5 % Equex. Post-thaw evaluations included: sperm motility, membrane function and acrosome status. A linear mixed effect model was used to test the effect of different freezing media on semen parameters. No differences were observed between the 4 freezing media used, for any of the seminal parameters (P > 0.05). However, samples with 5 % DMF showed the highest percentages of sperm with acrosomes and functional membranes (DMF: 5 %: 53.67 ± 22.01; 7 %: 33.92 ± 23.4; MF: 5 %: 44.5 ± 20.46; 7 %: 38.75 ± 27.4) (Data: mean ± SD; P > 0.05). Hence, thirty mares were inseminated: 15 with 5 % DMF and 15 with 7 % DMF. The pregnancy rate was 46 % (7/15) and 0 % (0/15) using the extender with 5 % or 7 % DMF, respectively (P = 0.003). To conclude, the use of 5 % or 7 % of MF or DMF did not affect the in vitro parameters. Despite the lack of differences in vitro with the two DMF concentrations, in vivo results only showed pregnancies when using 5 % DMF. Thus, the results of this study demonstrate the importance of accompanying in vitro semen evaluations with studies that evaluate post-insemination pregnancy rates.

NLRP3 inflammasome activation triggers severe inflammatory liver injury in N, N-dimethylformamide-exposed mice.

N,N-dimethylformamide (DMF) is a widely utilized chemical solvent with various industrial applications. Previous studies have indicated that the liver is the most susceptible target to DMF exposure, whereas the underlying mechanisms remain to be elucidated. This study aimed to investigate the role of NLRP3 inflammasome in DMF-induced liver injury in mice by using two NLRP3 inflammasome inhibitors, Nlrp3-/- mice, Nfe2l2-/- mice, and a macrophage-depleting agent. RNA sequencing revealed that endoplasmic reticulum (ER) stress and NLRP3 inflammasome-associated pathways were activated in the mouse liver after acute DMF exposure, which was validated by Western blotting. Interestingly, DMF-induced liver injury was effectively suppressed by two inflammasome inhibitors, MCC950 and Dapansutrile. In addition, knockout of Nlrp3 markedly attenuated DMF-induced liver injury without affecting the metabolism of DMF. Furthermore, silencing Nfe2l2 aggravated the liver injury and the NLRP3 inflammasome activation in mouse liver. Finally, the depletion of hepatic macrophages by clodronate liposomes significantly reduced the liver damage caused by DMF. These results suggest that NLRP3 inflammasome activation is the upstream molecular event in the development of acute liver injury induced by DMF.

Optimization of peptide synthesis time and sustainability using novel eco-friendly binary solvent systems with induction heating on an automated peptide synthesizer.

On December 12th, 2023, the European Commission took regulatory action to amend Annex XVII of REACH, imposing restrictions on the use of N,N-dimethylformamide (DMF) within the EU market owing to its high toxicity. Historically, DMF has been widely considered the gold standard for solid-phase peptide synthesis (SPPS). Being urgent to propose alternative solvents, we tested the suitability of non-hazardous neat and mixed solvents. Notably, binary solvent mixtures containing dimethyl sulfoxide as one of the solvent partners demonstrated high efficacy in solubilizing reagents while maintaining the desired swelling characteristics of common resins. A series of binary solvent mixtures were tested in automated SPPS, both at room temperature and high temperature, employing the PurePep® Chorus synthesizer, which enabled controlled induction heating between 25 and 90°C with oscillation mixing. The performances were assessed in challenging peptide sequences, i.e., ACP (65-74), and in longer and aggregating sequences like SARS-CoV-2 RBM (436-507) and ß-amyloid (1-42). Furthermore, as part of the proposed sustainable approach to minimize the utilization of hazardous solvents, we coupled the novel PurePep EasyClean catch-and-release purification technology. This work, addressing regulatory compliance, emphasizes the crucial role of green chemistry in advancing safer and more environmentally friendly practices in SPPS.

The proliferation of antibiotic resistance genes (ARGs) and microbial communities in industrial wastewater treatment plant treating N,N-dimethylformamide (DMF) by AAO process.

The excessive use of antibiotics has resulted in the contamination of the environment with antibiotic resistance genes (ARGs), posing a significant threat to public health. Wastewater treatment plants (WWTPs) are known to be reservoirs of ARGs and considered to be hotspots for horizontal gene transfer (HGT) between bacterial communities. However, most studies focused on the distribution and dissemination of ARGs in hospital and urban WWTPs, and little is known about their fate in industrial WWTPs. In this study, collected the 15 wastewater samples containing N,N-dimethylformamide (DMF) from five stages of the anaerobic anoxic aerobic (AAO) process in an industrial WWTPs. The findings revealed a stepwise decrease in DMF and chemical oxygen demand (COD) content with the progression of treatment. However, the number and abundances of ARGs increase in the effluents of biological treatments. Furthermore, the residues of DMF and the treatment process altered the structure of the bacterial community. The correlation analysis indicated that the shift in bacterial community structures might be the main driver for the dynamics change of ARGs. Interestingly, observed that the AAO process may acted as a microbial source and increased the total abundance of ARGs instead of attenuating it. Additionally, found that non-pathogenic bacteria had higher ARGs abundance than pathogenic bacteria in effluents. The study provides insights into the microbial community structure and the mechanisms that drive the variation in ARGs abundance in industrial WWTPs.

The potential health risks of N,N-dimethylformamide: An updated review.

N,N-dimethylformamide (DMF) is a universally used industrial material with exponential growth in production and consumption worldwide. The frequently reported occupational DMF poisoning cases in some countries and the gradually recognized unavoidable health risks to the general population highlight that DMF should still be a matter of concern. Previous studies have demonstrated that the liver is the primary target organ of DMF exposure and multiple mechanisms have been revealed. However, most of these studies investigate the detrimental effects of acute and subacute DMF exposure, while the effects of chronic DMF exposure are rarely studied. Furthermore, the key mechanism for the acute hepatotoxicity of DMF remains to be elucidated. Future research may focus on the identification of efficient preventive measures against the toxicity of DMF to occupational workers, the investigation of the detrimental effects of DMF at environmentally relevant doses, and the studies on the elimination and recycling of DMF in industrial wastes. Herein, we present an updated review of the metabolism of DMF, the biomarker of DMF exposure, underlying molecular mechanisms of DMF-induced hepatotoxicity, and the toxicity of DMF to both occupational workers and general populations and discuss the possible directions in future studies.

Ultrathin organic solvent nanofiltration membrane with polydopamine-HKUST-1 interlayer for organic solvent separation.

Polydopamine (PDA) and metal-organic skeleton HKUST-1 were co-deposited on the base membrane of hexamethylenediamine (HDA)-crosslinked polyetherimide (PEI) ultrafiltration membrane as the interlayer, and high-throughput organic solvent nanofiltration membrane (OSN) was prepared by interfacial polymerization and solvent activation reaction. The polyamide (PA) layer surface roughness from 28.4 nm in PA/PEI to 78.3 nm in PA/PDA-HKUST-10.6/PEI membrane, reduced the thickness of the separation layer from 79 to 14 nm, and significantly improved the hydrophilic, thermal and mechanical properties. The flux of the PA/PDA-HKUST-10.6/PEI membrane in a 0.1 g/L Congo Red (CR) ethanol solution at 0.6 MPa test pressure reached 21.8 L/(m2·hr) and the rejection of CR was 92.8%. Solvent adsorption test, N, N-dimethylformamide (DMF) immersion experiment, and long-term operation test in ethanol showed that the membranes had high solvent tolerance. The solvent flux test demonstrated that, under the test pressure of 0.6 MPa, the flux of different solvents ranked as follows: methanol (56.9 L/(m2·hr)) > DMF (39.6 L/(m2·hr)) > ethanol (31.2 L/(m2·hr)) > IPA (4.5 L/(m2·hr)) > N-hexane (1.9 L/(m2·hr)). The ability of the membranes to retain dyes in IPA/water dyes solution was also evaluated. The flux of the membrane was 30.4 L/(m2·hr) and the rejection of CR was 91.6% when the IPA concentration reached 50%. This OSN membrane-making strategy is economical, environment-friendly and efficient, and has a great application prospect in organic solvent separation systems.

N,N-Dimethyl Formamide European Restriction Demands Solvent Substitution in Research and Development.

As of December 2023, the use of common solvent N,N-dimethyl formamide (DMF) will be restricted in the European Union because of its reproductive health hazard. Industrial facilities must comply with stricter exposure limits, and researchers are recommended to find alternative solvents. Here we explain the restrictions on DMF, which disciplines are affected, and how to substitute DMF to keep research and development commercially relevant.

Impact analysis of hydraulic residence time and dissolved oxygen on performance efficiency and microbial community in N, N-dimethylformamide wastewater treated by an AnSBR-ASBR.

Suitable operating parameters are one of the key factors to efficient and stable biological wastewater treatment of N, N-dimethylformamide (DMF) wastewater. In this study, an improved AnSBR-ASBR reactor (anaerobic sequencing batch reactor, AnSBR, and aerobic SBR, ASBR, run in series) was used to investigated the effects of operating conditions such as hydraulic residence time (HRT), AnSBR stirring speed and ASBR dissolved oxygen (DO) for DMF wastewater treatment. When HRT decreased from 24 h to 12 h, the average removal rates of COD by the AnSBR were 34.59% and 39.54%, respectively. Meanwhile, the removal rate of NH4+-N by ASBR decreased from 88.38% to 62.81%. The DMF removal rate reached the best at 18 h and the expression of dehydrogenase was the highest in the AnSBR. The abundance of Megasphaera, the dominant sugar-degrading bacteria in the AnSBR, continued to decline due to the decrease of HRT. The relative abundance of Methanobacterium gradually increased to 80.2% with the decrease of HRT and that hydrotrophic methanogenesis dominated the methanogenic process. The HRT decrease promoted butyrate and pyruvate metabolism in anaerobic sludge, but the proportion of glycolysis and methane metabolism decreased. The AnSBR-ASBR reactor had the best operation performance when HRT was 18 h, AnSBR speed was 220 r/min, and ASBR DO content was 3-4 mg/L. This study provided an effective reference for the reasonable selection of operating parameters in the treatment of DMF-containing wastewater by the AnSBR-ASBR.

DMF mineralization and substrate specificity mechanism of Aminobacter ciceronei DMFA1.

N,N-dimethylformamide (DMF) is widely used in various industries, but its direct release into water poses high risks to human beings. Although a lot of DMF-degrading bacteria has been isolated, limited studies focus on the degradation preference among DMF and its analogues. In this study, an efficient DMF mineralization bacterium designated Aminobacter ciceronei DMFA1 was isolated from marine sediment. When exposed to a 0.2% DMF (∼1900 mg/L), strain DMFA1 exhibited a degradation efficiency of 100% within 4 days. The observed growth using formamide as the sole carbon source implied the possible DMF degradation pathway of strain DMFA1. Meanwhile,the strain DMFA1 possesses a broad-spectrum substrate degradation, which could effectively degraded 0.2% N,N-dimethylacetamide (DMAC) and N-methylformamide (NMF). Genomic analysis further confirmed the supposed pathway through annotating the genes encoding N, N-dimethylformamidase (DMFase), formamidase, and formate dehydrogenase. The existence of sole DMFase indicating its substrate specificity controlled the preference of DMAc of strain DMFA1. By integrating multiple sequence alignment, homology modeling and molecular docking, the preference of the DMFase in strain DMFA1 towards DMAc are related to: 1) Mutations in key active site residues; 2) the absence of small subunit; and 3) no energy barrier for substrates entering the active site.

[Development of 2,4,6-trinitrophenol examination methods to evaluate the features of its distribution in warm-blooded animals]. / Razrabotka metodik issledovaniya 2,4,6-trinitrofenola dlya otsenki kharaktera ego raspredeleniya v organizme teplokrovnykh zhivotnykh.

THE OBJECTIVE: Is to study a 2, 4, 6-trinitrophenol (2.4,6-TNP) distribution in warm-blooded animals using physical chemical analysis methods after intragastric injection of toxicant. The methods of thin-layer chromatography, spectrophotometry and high-efficient liquid chromatography were used in the study process. Four-months-old rats of the Wistar line (males) were considered as a model of warm-blooded organisms. The investigated substance in amount of three-times LD50 was intragastrically injected in the aqueous-suspension state. 2.4,6-TNP was isolated by a mixture of acetone-acetonitrile (1:1) in a double (by 0.5 of hour) infusing mode from the bioactive matrix of experimental animals, sustaining the mass ratio of isolated agent to bioactive matrix equaled to 2:1. Purification and preliminary identification of analyte were conducted on «Sorbfil¼ plates (mobile phase - acetone - chloroform (7:3)), confirming identification - by absorption in dimethylformamide medium and by retention time in column (64×2 mm) of «Separon C-18¼ sorbent during elution by acetonitrile-water (2:8) mixture. The evaluation of 2, 4, 6-trinitrophenol quantitative content by optical density of dimethylformamide solution of analyte at 379 nm was carried out. The analyte in unchanged form was found in blood, parenchymatous and hollow organs, their contents and blood of experimental animals. The highest content of 2.4,6-TNP (mg/100 gr) was revealed in gastric content (149.88±22.70), gastric tissue (97.89±4.86), blood (15.91±0.90) and muscles (10.87±1.91).

Genomic profiling and characteristics of a C1 degrading heterotrophic fresh-water bacterium Paracoccus sp. strain DMF.

Paracoccus species are metabolically versatile gram-negative, aerobic facultative methylotrophic bacteria showing enormous promise for environmental and bioremediation studies. Here we report, the complete genome analysis of Paracoccus sp. strain DMF (P. DMF) that was isolated from a domestic wastewater treatment plant in Kanpur, India (26.4287 °N, 80.3891 °E) based on its ability to degrade a recalcitrant organic solvent N, N-dimethylformamide (DMF). The results reveal a genome size of 4,202,269 base pairs (bp) with a G + C content of 67.9%. The assembled genome comprises 4141 coding sequences (CDS), 46 RNA sequences, and 2 CRISPRs. Interestingly, catabolic operons related to the conventional marine-based methylated amines (MAs) degradation pathway were functionally annotated within the genome of an obligated aerobic heterotroph that is P. DMF. The genomic data-based characterization presented here for the novel heterotroph P. DMF aims to improve the understanding of the phenotypic gene products, enzymes, and pathways involved with greater emphasis on facultative methylotrophic motility-based latent pathogenicity.