Which detergent is most suitable for the generation of an acellular pancreas bioscaffold?

Pancreatic bioengineering is a potential therapeutic alternative for type 1 diabetes (T1D) in which the pancreas is decellularized, generating an acellular extracellular matrix (ECM) scaffold, which may be reconstituted by recellularization with several cell types to generate a bioartificial pancreas. No consensus for an ideal pancreatic decellularization protocol exists. Therefore, we aimed to determine the best-suited detergent by comparing sodium dodecyl sulfate (SDS), sodium deoxycholate (SDC), and Triton X-100 at different concentrations. Murine (n=12) and human pancreatic tissue from adult brain-dead donors (n=06) was harvested in accordance with Institutional Ethical Committee of the University of São Paulo Medical School (CEP-FMUSP) and decellularized under different detergent conditions. DNA content, histological analysis, and transmission and scanning electron microscopy were assessed. The most adequate condition for pancreatic decellularization was found to be 4% SDC, displaying: a) effective cell removal; b) maintenance of extracellular matrix architecture; c) proteoglycans, glycosaminoglycans (GAGs), and collagen fibers preservation. This protocol was extrapolated and successfully applied to human pancreas decellularization. The acellular ECM scaffold generated was recelullarized using human pancreatic islets primary clusters. 3D clusters were generated using 0.5×104 cells and then placed on top of acellular pancreatic slices (25 and 50 µm thickness). These clusters tended to connect to the acellular matrix, with visible cells located in the periphery of the clusters interacting with the ECM network of the bioscaffold slices and continued to produce insulin. This study provided evidence on how to improve and accelerate the pancreas decellularization process, while maintaining its architecture and extracellular structure, aiming at pancreatic bioengineering.

Evaluating the Expression of Efflux Pumps in Pseudomonas aeruginosa in Exposure to Sodium Dodecyl Sulfate, Didecyldimethylammonium Chloride, and Octenidine Dihydrochloride.

Emerging resistance of Gram-negative bacteria, including Pseudomonas aeruginosa, to commonly used detergents and disinfectant is encountering us with hazard. Inappropriate use of disinfectants has forced bacteria to gain resistance. The ability of bacteria to extrude substrates from the cellular interior to the external environment has enabled them to persist in exposure to toxic compounds, which is due to existence of transport proteins. Efflux pumps, in Gram-negative bacteria, are proteins responsible for exporting molecules outside of the cell, by crossing the two membranes. In this study, 40 P. aeruginosa strains from hospitals, clinics, and burn center laundries and 40 P. aeruginosa strains from urban laundries were collected. This study evaluated the minimum inhibitory concentration (MIC) level of sodium dodecyl sulfate (SDS), didecyldimethylammonium chloride (DDAC), and octenidine dihydrochloride (Od) in P. aeruginosa strains. The real-time PCR was carried out to evaluate the expression of MexAB-OprM, MexCD-OprJ, and MexXY-OprM efflux system. The obtained results indicated a higher MIC level for SDS, DDAC, and Od in medical laundries. The sub-MIC level of DDAC and Od increased the expression level of MexAB-OprM, MexCD-OprJ, and MexXY-OprM in P. aeruginosa strains, suggesting that efflux pumps contribute to disinfectant resistance in P. aeruginosa.

Impact of Surfactants on Cumulative Trypsin Activity in Bottom-Up Proteome Analysis.

Trypsin digestion plays a pivotal role in successful bottom-up peptide characterization and quantitation. While denaturants are often incorporated to enhance protein solubility, surfactants are recognized to inhibit enzyme activity. However, several reports have suggested that incorporating surfactants or other solvent additives may enhance digestion and MS detection. Here, we assess the impacts of ionic surfactants on cumulative trypsin activity and subsequently evaluate the total digestion efficiency of a proteome mixture by quantitative MS. Although low surfactant concentrations, such as 0.01% SDS or 0.2% SDC, significantly enhanced the initial trypsin activity (by 14 or 42%, respectively), time course assays revealed accelerated enzyme deactivation, evident by 10- or 40-fold reductions in trypsin activity half-life at these respective surfactant concentrations. Despite enhanced initial tryptic activity, quantitative MS analysis of a common liver proteome extract, digested with various surfactants (0.01 or 0.1% SDS, 0.5% SDC), consistently revealed decreased peptide counts and signal intensity, indicative of a lower digestion efficiency compared to a nonsurfactant control. Furthermore, including detergents for digestion did not improve the detection of membrane proteins, nor hydrophobic peptides. These results stress the importance of assessing cumulative enzyme activity when optimizing the digestion of a proteome mixture, particularly in the presence of denaturants.

The Structural Stability of Membrane Proteins Revisited: Combined Thermodynamic and Spectral Phasor Analysis of SDS-induced Denaturation of a Thermophilic Cu(I)-transport ATPase.

Assessing membrane protein stability is among the major challenges in protein science due to their inherent complexity, which complicates the application of conventional biophysical tools. In this work, sodium dodecyl sulfate-induced denaturation of AfCopA, a Cu(I)-transport ATPase from Archaeoglobus fulgidus, was explored using a combined model-free spectral phasor analysis and a model-dependent thermodynamic analysis. Decrease in tryptophan and 1-anilino-naphthalene-8-sulfonate fluorescence intensity, displacements in the spectral phasor space, and the loss of ATPase activity were reversibly induced by this detergent. Refolding from the SDS-induced denatured state yields an active enzyme that is functionally and spectroscopically indistinguishable from the native state of the protein. Phasor analysis of Trp spectra allowed us to identify two intermediate states in the SDS-induced denaturation of AfCopA, a result further supported by principal component analysis. In contrast, traditional thermodynamic analysis detected only one intermediate state, and including the second one led to overparameterization. Additionally, ANS fluorescence spectral analysis detected one more intermediate and a gradual change at the level of the hydrophobic transmembrane surface of the protein. Based on this evidence, a model for acquiring the native structure of AfCopA in a membrane-like environment is proposed.

Effect of surfactant's charge properties on behavior, physiology, and biochemistry and the release of microcystins of Microcystis aeruginosa.

Surfactant pollution is escalatitheng in eutrophic waters, but the effect of surfactant charge properties on the physiological and biochemical properties of toxin-producing microalgae remains inadequately explored. To address this gap, this study explores the effects and mechanisms of three common surfactants-cetyltrimethylammonium bromide (CTAB, cationic), sodium dodecyl sulfate (SDS, anionic), and Triton X-100 (nonionic)-found in surface waters, on the agglomeration behavior, physiological indicators, and Microcystin-LR (MC-LR) release of Microcystis aeruginosa (M. aeruginosa) by using UV-visible spectroscope, Malvern Zetasizer, fluorescence spectrometer, etc. Results suggest that charge properties significantly affect cyanobacterial aggregation and cellular metabolism. The CTAB-treated group demonstrates a ∼5.74 and ∼9.74 times higher aggregation effect compared to Triton X-100 and SDS (300 mg/L for 180 min) due to strong electrostatic attraction. Triton X-100 outperforms CTAB and SDS in polysaccharide extraction, attributed to its higher water solubility and lower critical micelle concentration. CTAB stimulates cyanobacteria to secrete proteins, xanthohumic acid, and humic acids to maintain normal physiological cells. Additionally, the results of SEM and ion content showed that CTAB damages the cell membrane, resulting in a ∼90% increase in the release of intracellular MC-LR without cell disintegration. Ionic analyses confirm that all three surfactants alter cell membrane permeability and disrupt ionic metabolic pathways in microalgae. This study highlights the relationship between the surface charge properties of typical surfactants and the dispersion/agglomeration behavior of cyanobacteria. It provides insights into the impact mechanism of exogenous surfactants on toxic algae production in eutrophic water bodies, offering theoretical references for managing surfactant pollution and treating algae blooms.

Morphological aspects and the effectiveness of photodynamic inactivation against Rhizopus oryzae in different life cycles.

Mucormycosis is an extremely aggressive fungal disease with a high mortality rate, especially in people with compromised immune systems. Most cases of mucormycosis are caused by the fungus Rhizopus oryzae. The treatments used are based on high doses of antifungals, associated with surgical resections, when it is possible. However, even with this aggressive treatment, the estimated attributable mortality rate is high. There is therefore a need to develop adjuvant treatments. Photodynamic Inactivation (PDI) may be an auxiliary therapeutic option for mucormycosis. Due to the lack of reports in the literature on the morphology and photodynamic inactivation of R. oryzae, characterization of the fungus using Confocal Microscopy and Transmission Electron Microscopy, and different protocols using Photodithazine® (PDZ), a chlorin e6 compound, as a photosensitizer, were performed. The fungus growth rate under different concentrations and incubation times of the photosensitizer and its association with the surfactant Sodium Dodecyl Sulphate (SDS) was evaluated. For the hyphae, both in the light and dark phases, in the protocols using only PDZ, no effective photodynamic response was observed. Meanwhile with the combination of SDS 0.05% and PDZ, inhibition growth rates of 98% and 72% were achieved for the white and black phase, respectively. In the conidia phase, only a 1.7 log10 reduction of the infective spores was observed. High concentration of melanin and the complex and resistant structures, especially at the black phase, results in a high limitation of the PDI inactivation response. The combined use of the SDS resulted in an improved response, when compared to the one obtained with the amphotericin B treatment.

Decellularized kidney capsule as a three-dimensional scaffold for tissue regeneration.

Tissue regeneration is thought to have considerable promise with the use of scaffolds designed for tissue engineering. Although polymer-based scaffolds for tissue engineering have been used extensively and developed quickly, their ability to mimic the in-vivo milieu, overcome immunogenicity, and have comparable mechanical or biochemical properties has limited their capability for repair. Fortunately, there is a compelling method to get around these challenges thanks to the development of extracellular matrix (ECM) scaffolds made from decellularized tissues. We used ECM decellularized sheep kidney capsule tissue in our research. Using detergents such as Triton-X100 and sodium dodecyl sulfate (SDS), these scaffolds were decellularized. DNA content, histology, mechanical properties analysis, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), biocompatibility, hemocompatibility and scanning electron microscope (SEM) imaging were measured. The results showed that the three-dimensional (3D) structure of the ECM remained largely intact. The scaffolds mentioned above had several hydrophilic properties. The best biocompatibility and blood compatibility properties were reported in the SDS method of 0.5%. The best decellularization scaffold was introduced with 0.5% SDS. Therefore, it can be proposed as a scaffold that has ECM like natural tissue, for tissue engineering applications.

Functional characterization and transcriptional analysis of degQ of Xanthomonas campestris pathovar campestris.

High-temperature-requirement protein A (HtrA) family proteins play important roles in controlling protein quality and are recognized as virulence factors in numerous animal and human bacterial pathogens. The role of HtrA family proteins in plant pathogens remains largely unexplored. Here, we investigated the HtrA family protein, DegQ, in the crucifer black rot pathogen Xanthomonas campestris pathovar campestris (Xcc). DegQ is essential for bacterial attachment and full virulence of Xcc. Moreover, the degQ mutant strain showed increased sensitivity to heat treatment and sodium dodecyl sulfate. Expressing the intact degQ gene in trans in the degQ mutant could reverse the observed phenotypic changes. In addition, we demonstrated that the DegQ protein exhibited chaperone-like activity. Transcriptional analysis displayed that degQ expression was induced under heat treatment. Our results contribute to understanding the function and expression of DegQ of Xcc for the first time and provide a novel perspective about HtrA family proteins in plant pathogen.

Impact of the Different Chemical-Based Decellularization Protocols on the Properties of the Caprine Pericardium.

PURPOSE: This study aims to decellularized caprine pericardium tissue with varied non-ionic surfactant and anionic detergent concentrations. METHODS: Protocol A consists of 1%, 0.5%, and 0.25% (w/v) sodium dodecyl sulphate (SDS). Protocol B uses 1%, 0.5%, and 0.25% (w/v) Triton X-100. Protocol C comprised 0.5% SDS + 0.5% Triton X-100, 0.5% + 0.25%, and 0.25% SDS + 0.5% Triton X-100. RESULTS: Protocol B left a few countable cells in the pericardium tissue, but treatments A and C removed all cells. DNA quantification also demonstrated that protocol B had the most leftover DNA after decellularization. The pericardium tissue treated with an equal combination of anionic detergent and non-ionic surfactant preserves the matrix. However, changing the anionic detergent-non-ionic surfactant ratio disrupted the microstructure. Protocol A decreased pericardium tissue secant modulus (p < 0.05). Protocol B-treated pericardium tissue matched native tissue secant modulus and ultimate tensile stress. Protocol C strengthened pericardium tissue. CONCLUSION: The intact extracellular matrix and biomechanical properties like native tissues require optimal chemical doses and combinations.

Decellularized tissue exhibits large differences of extracellular matrix properties dependent on decellularization method: novel insights from a standardized characterization on skeletal muscle.

Decellularized matrices are an attractive choice of scaffold in regenerative medicine as they can provide the necessary extracellular matrix (ECM) components, signals and mechanical properties. Various detergent-based protocols have already been proposed for decellularization of skeletal muscle tissue. However, a proper comparison is difficult due to differences in species, muscle origin and sample sizes. Moreover, a thorough evaluation of the remaining acellular matrix is often lacking. We compared an in-house developed decellularization protocol to four previously published methods in a standardized manner. Porcine skeletal muscle samples with uniform thickness were subjected to in-depth histological, ultrastructural, biochemical and biomechanical analysis. In addition, 2D and three-dimensional cytocompatibility experiments were performed. We found that the decellularization methods had a differential effect on the properties of the resulting acellular matrices. Sodium deoxycholate combined with deoxyribonuclease I was not an effective method for decellularizing thick skeletal muscle tissue. Triton X-100 in combination with trypsin, on the other hand, removed nuclear material but not cytoplasmic proteins at low concentrations. Moreover, it led to significant alterations in the biomechanical properties. Finally, sodium dodecyl sulphate (SDS) seemed most promising, resulting in a drastic decrease in DNA content without major effects on the ECM composition and biomechanical properties. Moreover, cell attachment and metabolic activity were also found to be the highest on samples decellularized with SDS. Through a newly proposed standardized analysis, we provide a comprehensive understanding of the impact of different decellularizing agents on the structure and composition of skeletal muscle. Evaluation of nuclear content as well as ECM composition, biomechanical properties and cell growth are important parameters to assess. SDS comes forward as a detergent with the best balance between all measured parameters and holds the most promise for decellularization of skeletal muscle tissue.

The effect of electrical stimulation on skin vulnerability to irritants.

PURPOSE: Electrical stimulation (ES) is a widely used technique in the medical field for various purposes. The effect of ES on several skin properties has been investigated; however, its effect on skin vulnerability to irritants remains unknown. This study aimed to investigate the effects of ES application on skin vulnerability to external irritants. MATERIALS AND METHODS: An experimental study on 12 healthy male subjects (Mean ± SD, 22.9 ± 3.6 years) who completed the study. The subjects were free of skin abnormalities in the volar aspect of both forearms. Three areas were allocated to each forearm and marked as areas 1, 2, and A in the treated forearm, and areas 3, 4, and B in the control forearm. ES was applied to the volar aspect of the treated forearm for 30 min three times a week, for 2 weeks. The effect of ES on skin vulnerability was investigated using 5% and 0.5% sodium lauryl sulfate (SLS) patches applied to both treated and control forearms. The skin response to irritants was evaluated using transepidermal water loss (TEWL) and a visual erythema score 24 h after patch removal. RESULTS: Compared to the control forearm, ES increased skin permeability and erythema in response to external irritants (SLS), as measured by the visual analog score (Z = 2.75, p = 0.006) and TEWL (p < 0.05), respectively. CONCLUSIONS: ES escalates skin reactions to low concentrations of irritant substances, such as SLS, in the area between the two electrodes. This emphasizes the use of this substance, and similar irritants should be avoided in areas treated with ES.

A novel Ca2+ double cone vector system to treat compromised skin.

BACKGROUND: Stressed, damaged or very aged skin is predominantly characterized by a malfunctioning skin barrier. Underlying skin barrier malfunction is a reduced or defective calcium gradient in the epidermis. Consequently, replenishing the compromised skin's calcium stores with topical calcium could be a potential therapeutic approach. METHODS: We investigated the effect of our novel Ca2+ double cone vector system on improving the differentiation and barrier function of reconstructed human epidermis (RHE), cultured at low basal calcium (0.3 mM) to represent very aged skin. Furthermore, in a randomized placebo-controlled clinical study the skin barrier of 20 healthy volunteers was challenged with 2% sodium lauryl sulphate (SLS) for 24 h under occlusion, following and/or prior to treatment with a gel containing 2% of our calcium vector system. RESULTS: Culture in reduced basal calcium conditions (0.3 mM) strongly impeded the formation of a dense stratified epidermis. The apical treatment with 1.1 mM CaCl2 was not able to restore a functional differentiation. Treatment with 0.1% of the Ca2+ delivery system rescued the differentiation process and resulted in a normal stratified epidermis. Clinically, application of the Ca2+ vector system prior to and following SLS stress prevented increases in skin irritation and transepidermal water loss (TEWL) compared to placebo controls. Importantly, the treatment also significantly accelerated the recovery time following SLS stress. CONCLUSION: With our novel Ca2+ vector system, we highlight the delivery of bioavailable Ca2+ ions into the skin as a new and successful approach to treat a damaged barrier present in stressed, aged or atopic skin.

CONTEXTE: Les peaux stressées, lésées ou très âgées se caractérisent principalement par un dysfonctionnement de la barrière cutanée. Le dysfonctionnement de la barrière cutanée est sous­tendu par un gradient de calcium réduit ou défectueux dans l'épiderme. Par conséquent, la reconstitution des réserves de calcium de la peau fragilisées à l'aide de calcium topique pourrait constituer une approche thérapeutique potentielle. MÉTHODES: Nous avons étudié l'effet de notre nouveau système de vecteur à double cône Ca2+ sur l'amélioration de la différenciation et de la fonction de barrière de l'épiderme humain reconstitué (EHR), cultivé à un faible niveau de calcium basal (0,3 mM) pour représenter une peau très âgée. En outre, dans une étude clinique randomisée, contrôlée par placebo, la barrière cutanée de 20 volontaires en bonne santé a été exposée à 2 % de laurylsulfate de sodium (SLS) pendant 24 heures sous occlusion, après et/ou avant le traitement avec un gel contenant 2 % de notre système de vecteur de calcium. RÉSULTATS: La culture dans des conditions de calcium basal réduit (0,3 mM) a fortement empêché la formation d'un épiderme stratifié dense. Le traitement apical avec 1,1 mM de CaCl2 n'a pas permis de rétablir une différenciation fonctionnelle. Le traitement avec 0,1 % du système de libération de Ca2+ a permis de rétablir le processus de différenciation et d'obtenir un épiderme stratifié normal. Sur le plan clinique, l'application du système de vecteur Ca2+ avant et après l'exposition au SLS a empêché l'augmentation de l'irritation cutanée et de la perte d'eau transépidermique (Transepidermal Water Loss, TEWL) par rapport aux témoins sous placebo. Il est important de noter que le traitement a également accéléré de manière significative le temps de récupération après l'exposition au SLS. CONCLUSION: Grâce à notre nouveau système de vecteurs Ca2+, nous mettons en évidence l'apport d'ions Ca2+ biodisponibles dans la peau comme une approche nouvelle et efficace pour traiter la barrière endommagée présente dans une peau stressée, âgée ou atopique.

Susceptibility of Cu(I) transport ATPases to sodium dodecyl sulfate. Relevance of the composition of the micellar phase.

Sodium dodecyl sulfate (SDS) is a well-known protein denaturing agent. A less known property of this detergent is that it can activate or inactivate some enzymes at sub-denaturing concentrations. In this work we explore the effect of SDS on the ATPase activity of a hyper-thermophilic and a mesophilic Cu(I) ATPases reconstituted in mixed micelles of phospholipids and a non-denaturing detergent. An iterative procedure was used to evaluate the partition of SDS between the aqueous and the micellar phases, allowing to determine the composition of micelles prepared from phospholipid/detergent mixtures. The incubation of enzymes with SDS in the presence of different amounts of phospholipids reveals that higher SDS concentrations are required to obtain the same degree of inactivation when the initial concentration of phospholipids is increased. Remarkably, we found that, if represented as a function of the mole fraction of SDS in the micelle, the degree of inactivation obtained at different amounts of amphiphiles converges to a single inactivation curve. To interpret this result, we propose a simple model involving active and inactive enzyme molecules in equilibrium. This model allowed us to estimate the Gibbs free energy change for the inactivation process and its derivative with respect to the mole fraction of SDS in the micellar phase, the latter being a measure of the susceptibility of the enzyme to SDS. Our results showed that the inactivation free energy changes are similar for both proteins. Conversely, susceptibility to SDS is significantly lower for the hyperthermophilic ATPase, suggesting an inverse relation between thermophilicity and susceptibility to SDS.

Effect of Drinking Water Salt Content on the Interaction between Surfactants and Bacteria.

Sodium dodecyl sulfate (SDS) is a common surfactant used in various hygienic products. Its interactions with bacteria were studied previously, but the three-way interaction between surfactants, bacteria, and dissolved salts in the context of bacterial adhesion has not been studied. Here, we examined the combined effects of SDS (at concentrations typical of everyday hygienic activities) and salts, sodium chloride, and calcium chloride (at concentrations typically found in tap water) on the adhesion behavior of the common opportunistic pathogen Pseudomonas aeruginosa. We found that bacterial adhesion in the absence of SDS was dependent on the cation concentration rather than the total ionic strength and that combined treatment with several millimolar NaCl and SDS can increase bacterial adhesion. The addition of low concentrations of SDS (2 mM) to tens to hundreds millimolar concentrations of NaCl, typical of systems that suffer seawater incursion, reduced bacterial adhesion dramatically. Combined treatment with Ca+2 (in concentrations typical of those found in hard water) and SDS produced a small increase in total adhesion but a dramatic increase in the strength of adhesion. We conclude that the type and concentration of salts in water can have a considerable effect on the efficacy of soap in reducing bacterial adhesion and should be taken under consideration in critical applications. IMPORTANCE Surface-adhering bacteria are a reoccurring problem in many settings, including households, municipal water systems, food production facilities, and hospitals. Surfactants, and specifically sodium dodecyl sulfate (also known as SDS/SLS), are commonly used to remove bacterial contamination, but data regarding the interaction of SDS with bacteria and especially the effects of water-dissolved salts on this interaction are lacking. Here, we show that calcium and sodium ions can dramatically affect the efficacy of SDS on bacterial adhesion behavior and conclude that salt concentrations and ion species in the water supply should be considered in SDS applications.

Enhancing antimicrobial photodynamic therapy with phenothiazinium dyes and sodium dodecyl sulfate against Candida albicans at various growth stages.

BACKGROUND: The eradication of C. albicans is difficult due to the organization of the yeast in biofilms. Photodynamic therapy (PDT) has been proposed as an alternative to antifungals. Phenothiazinium dyes, e.g. methylene blue (MB), have been proposed as photosensitizing agents (PS), and their association with sodium dodecyl sulfate (SDS) has recently been shown to improve the effectiveness of PDT in planktonic culture. In this sense, the objective of this work was to evaluate the effect of PDT with phenothiazinium dyes associated to SDS in biofilms at the different stages of growth. METHODS: Experiments were carried out to evaluate the effects of PDT on biofilm formation and on established biofilms of C. albicans ATCC 10231. Samples were exposed to PS 50 mg/L (MB, Azure A - AA, Azure B - AB and dimethyl methylene blue - DMMB) dissolved in water or 0.25% SDS, for 5 min in the dark. After irradiation at 660 nm, 37.3mW/cm2 for 27 min, 60.4J/cm2 colony forming units count assay (CFU/mL) was performed. One or two irradiations were applied. Statistical methods were used to assess effectiveness. RESULTS: PSs showed low toxicity in the dark. An application of PDT irradiation was not able to reduce the CFU/mL both in mature biofilms (24h) and in biofilms in the dispersion phase (48h), only in the adherence phase did PDT prevent the formation of biofilms. With two successive applications of PDT irradiation in the dispersion phase, PDT with MB, AA, and DMMB completely inactivated C. albicans. The similar was not observed with mature biofilms. CONCLUSIONS: Different stages of biofilm growth respond differently to PDT, with the greatest inhibitory effect found in the adhesion stage. Mature and dispersed biofilms are less susceptible to PDT. The use of two successive applications of PDT with PSs associated with SDS may be a useful approach to inactivate C. albicans biofilms.

The combination of methylene blue and sodium dodecyl sulfate enhances the antimicrobial photodynamic therapy of Candida albicans at lower light parameters.

BACKGROUND: The growth of resistant microorganisms has been a challenge for health systems. Antimicrobial Photodynamic Therapy (aPDT) has gained attention due to its effects on resistant strains. Recently, it was shown that the association of methylene blue (MB) and sodium dodecyl sulfate (SDS) are an effective strategy to increase the effect of aPDT; however, it is unknown which are the best light parameters (such as irradiance and radiant exposure, RE), to reach the most effective protocols. This work aimed to evaluate the light parameters, irradiance, and radiant exposure, in aPDT with MB when conveyed in water compared to MB associated with SDS. METHODS: Tests were carried out to quantify the colony-forming units (CFU) of ATCC 10,231 strain of Candida albicans when using MB in different media and with different light parameters: Control (water), SDS (0.25%), MB (20 mg/mL), and the MB/SDS at irradiances of 3.7; 11.2; 18.6, and 26.1 mW/cm2 and varied irradiation times to reach radiant exposures of 4.4; 17.8; 26.7, and 44 J/cm². RESULTS: The results showed that aPDT with MB/SDS had a higher antimicrobial effect than MB when conveyed in water. Furthermore, for the highest irradiance studied (26.1 mW/cm2), CFU decreases exponentially with increasing RE from 4.4 up to 44 J/cm2. Similarly, at a fixed RE, the higher the irradiance used, the higher the antimicrobial effect was observed, except for the lowest RE studied (4.4 J/cm2). CONCLUSIONS: aPDT with MB/SDS had a greater antimicrobial action at the lower light parameters when compared to MB conveyed in water. The authors suggest the use of RE above 18 J/cm2 and irradiance above 26 mW/cm2 since at the mentioned parameters the increase in its value caused a greater antimicrobial effect.

Inactivation of Staphylococcus aureus by Levulinic Acid Plus Sodium Dodecyl Sulfate and their Antibacterial Mechanisms on S. aureus Biofilms by Transcriptomic Analysis.

The combination of levulinic acid (LVA) and sodium dodecyl sulfate (SDS) in recent years has shown a considerable potential to use as an antimicrobial intervention. The objectives of this study were to evaluate the antimicrobial efficacy of the combination against Staphylococcus aureus in both planktonic and biofilm states and to investigate the transcriptional changes in S. aureus biofilms coincubated with sublethal concentrations of LVA and/or SDS. The minimum inhibitory concentrations (MICs) of LVA and SDS determined by the microdilution method were 3.125 and 0.039 mg/mL, respectively. An additive bacteriostatic interaction (fractional inhibitory concentration index = 1) between the two compounds was observed by the checkerboard assay, whereas a synergistic bactericidal activity was displayed by the time-kill assay. The biomass and viable cells in the biofilms were reduced by both antimicrobials either alone or in combination in a dose-dependent manner. Transcriptomics indicated that more differentially expressed (DE) genes were observed in the biofilm treated with SDS (103 up- and 205 downregulated DE genes) and LVA + SDS (187 up and 162 down) than that coincubated with LVA (34 up and 32 down). The SDS and LVA + SDS treatments mainly affected the expression of genes responsible for cell surface proteins, virulence factors, adhesins, and capsular polysaccharides. Both the antibiofilm assay and the transcriptomics indicated that SDS, not LVA, was the major chemical contributing to the antibacterial efficacy of the combination. This study reveals the behavioral responses and protective mechanisms of S. aureus to LVA and SDS applied individually or in combination.

Reduced Biofilm Formation at the Air-Liquid-Solid Interface via Introduction of Surfactants.

Reduced biofilm formation is highly desirable in applications ranging from transportation to separations and healthcare. Biofilms often form at the three-phase interface where air, liquid, and solid coexist due to the close proximity to nutrients and oxygen. Reducing biofilm formation at the triple interface presents challenges because of the conflicting requirements for hydrophobicity at the air-solid interface (for self-cleaning properties) and for hydrophilicity at the liquid-solid interface (for reduced foulant adhesion). Meeting those needs simultaneously likely entails a dynamic surface, capable of shifting the surface energy landscape in response to wetting conditions and thus enabling hydrophobicity in air and hydrophilicity in water. Here, we designed a facile approach to render existing surfaces resistant to biofilm formation at the triple interface. By adding trace amounts (∼0.1 mM) of surfactants, biofilm formation of Pseudomonas aeruginosa (known to form biofilm at the triple interface) was reduced on all surfaces tested, ranging from hydrophilic to hydrophobic, polar to nonpolar. That reduced fouling was not a result of the known antimicrobial effects. Instead, it was attributed to the surface-adsorbed surfactants that dynamically control surface energy at the triple interface. To further understand the effect of surfactant-surface interactions on biofilm reduction, we systematically varied the surfactant charge type and surface properties (surface energy and charge). Electrostatic interactions between surfactants and surfaces were identified as an influential factor when predicting the relative fouling reduction upon introduction of surfactants. Nevertheless, biofilm formation was reduced even on the charge-neutral, fluorinated surface made of poly(1H, 1H, 2H, 2H-perfluorodecyl acrylate) by more than 2-fold simply via adding 0.2 mM dodecyl trimethylammonium chloride or 0.3 mM sodium dodecyl sulfate. Given its robustness, this strategy is broadly applicable for reducing fouling on existing surfaces, which in turn improves the cost-effectiveness of membrane separations and mitigates contaminations and nosocomial infections in healthcare.

Influence of permeability enhancers on the paracellular permeability of metformin hydrochloride and furosemide across Caco-2 cells.

Permeability enhancers can affect absorption of paracellularly transported drugs. This study aims to evaluate effects of permeability enhancers (chitosan, methyl-ß -cyclodextrin, sodium caprate, sodium lauryl sulfate, etc.) on the permeability of paracellularly absorbed furosemide and metformin hydrochloride. Methyl thiazole tetrazolium bromide test was carried out to determine the drug concentrations in permeability study. Trans-epithelial electrical resistance (TEER) values determined to assess the integrity of tight junctions. Permeability enhancers were applied at different concentrations alone, in dual/triple combinations. Permeability was determined using human colorectal adenocarcinoma (Caco-2) cells (TEER > 400 Ω·cm2). Permeability enhancers have no significant effect (<2-fold; p > 0.05) on the permeability of furosemide (1.80 × 10-5 ± 4.55 × 10-7 cm/s); however, metformin permeability (1.36 × 10-5 ± 1.25 × 10-6 cm/s) increased significantly (p < 0.05) with 0.3% and 0.5% (w/v) chitosan (2.0- and 2.7-fold, respectively), 1% methyl-ß -cyclodextrin (w/v) (3.5-fold), 10 and 20 µmol/L sodium caprate (2.2- and 2.8-fold, respectively), and 0.012% sodium lauryl sulfate (w/v) (1.9-fold). Furosemide permeability increased significantly (p < 0.05) with chitosan-sodium lauryl sulfate combination (1.7-fold), and all triple combinations (1.4- to 1.9-fold). Chitosan containing dual/triple combinations resulted in significant increase (p < 0.05) in metformin permeability (1.7 to 2.8-fold). All results indicated that absorption of furosemide and metformin can be improved by the combination of permeability enhancers. Therefore, it can be evaluated for the formulation of development strategies containing furosemide and metformin by the pharmaceutical industry.

Automated Decellularization of the Rodent Epigastric Free Flap: A Comparison of Sodium Dodecyl Sulfate-Based Protocols.

BACKGROUND: Free tissue transfer to cover complex wounds with exposed critical structures results in donor-site morbidity. Perfusion decellularization and recellularization of vascularized composite tissues is an active area of research to fabricate complex constructs without a donor site. Sodium dodecyl sulfate (SDS)-based protocols remain the predominant choice for decellularization despite the deleterious effects on tissue ultrastructure and capillary networks. We aimed to develop an automated decellularization process and compare different SDS perfusion times to optimize the protocol. METHODS: A three-dimensional-printed closed-system bioreactor capable of continuously perfusing fluid through the vasculature was used for decellularization. The artery and vein of rat epigastric fasciocutaneous free flaps were cannulated and connected to the bioreactor. Protocols had varying durations of 1% SDS solution (3, 5, and 10 days) followed by 1 day of 1% Triton X-100 and 1 day of 1x phosphate-buffered saline. The residual DNA was quantified. Microarchitecture of the constructs was assessed with histology, and the vascular network was visualized for qualitative assessment. RESULTS: The structural integrity and the microarchitecture of the extracellular matrix was preserved in the 3- and 5-day SDS perfusion groups; however, the subcutaneous tissue of the 10-day protocol lost its structure. Collagen and elastin structures of the pedicle vessels were not compromised by the decellularization process. Five-day SDS exposure group had the least residual DNA content (p < 0.001). Across all protocols, skin consistently had twice as much residual DNA over the subcutaneous tissues. CONCLUSION: A compact and integrated bioreactor can automate decellularization of free flaps to bioengineer regenerative constructs for future use in reconstruction of complex defects. A decellularization protocol with 5 days of 1% SDS exposure was the most successful to keep the residual DNA content at a minimum while preserving the structural integrity of the tissues.