Unused, expired pharmaceuticals and their disposal practices among the general public in Burdur-Türkiye: a cross-sectional study.

BACKGROUND: Unused pharmaceuticals are currently a public health problem. This study aimed to identify unused pharmaceuticals, research practices about the disposal methods, classify the medicines according to Anatomical Therapeutic Chemical codes (ATC) and, to determine the number of unused medicines. METHODS: The study was designed as a cross-sectional study. Data were collected between April and August 2023 in Burdur-Türkiye by non-probability sampling technique (convenience method). Pharmaceuticals were classified according to ATC. Statistical Package for Social Science SPSS (V.24) package program was used for data analysis. RESULTS: A total of 1120 people, 1005 in the first sample group and 115 in the second sample group, participated in the study. Findings of first sample group: A total of 4097 boxes of unused pharmaceuticals (4.7 ± 4.3 boxes/per capita) were detected. It was found that pharmaceuticals were stored in areas such as kitchens (59.1%) and refrigerators (38.6%), the reason for keeping them was reuse (41%), and the disposal practice was household garbage (81%). Paracetamol (648 boxes), Other cold preparation (303 boxes), Dexketoprofen (239 boxes), Diclofenac (218 boxes), Amoxicillin and beta-lactamase inhibitor (190 boxes) were found to be the most frequently unused pharmaceuticals. Using the unused medicines at home without consulting a physician was 94.1% (self-medication). Findings of second sample group: Of the 6189 dosage forms in 265 boxes pharmaceutical, 3132(50.6%) dosage forms were used and 3057(49.4%) were found to be unused. CONCLUSION: There is a significant amount and number of unused medicines in households, and self-medication is common. Medicines are not properly disposed of and some of them expire. Public information is needed. A "drug take-back system" for unused medicines can be useful in solving this problem.

Integrating fuzzy-AHP and GIS for solid waste disposal site selection in Kenitra province, NW Morocco.

Selecting an optimal solid waste disposal site is one of the decisive waste management issues because unsuitable sites cause serious environmental and public health problems. In Kenitra province, northwest Morocco, sustainable disposal sites have become a major challenge due to rapid urbanization and population growth. In addition, the existing disposal sites are traditional and inappropriate. The objective of this study is to suggest potential suitable disposal sites using fuzzy logic and analytical hierarchy process (fuzzy-AHP) method integrated with geographic information system (GIS) techniques. For this purpose, thirteen factors affecting the selection process were involved. The results showed that 5% of the studied area is considered extremely suitable and scattered in the central-eastern parts, while 9% is considered almost unsuitable and distributed in the northern and southern parts. Thereafter, these results were validated using the area under the curve (AUC) of the receiver operating characteristics (ROC). The AUC found was 57.1%, which is a moderate prediction's accuracy because the existing sites used in the validation's process were randomly selected. These results can assist relevant authorities and stakeholders for setting new solid waste disposal sites in Kenitra province.

Nanobubble technology to enhance energy recovery from anaerobic digestion of organic solid wastes: Potential mechanisms and recent advancements.

Nanobubble (NB) technology has gained popularity in the environmental field owing to its distinctive characteristics and ecological safety. More recently, the application of NB technology in anaerobic digestion (AD) systems has been proven to promote substrate degradation and boost the production of biogas (H2 and/or CH4). This review presents the recent advancements in the application of NB technology in AD systems. Meanwhile, it also sheds light on the underlying mechanisms of NB technology that contribute to the enhanced biogas production from AD of organic solid wastes. Specifically, the working principles of the NB generator are first summarized, and then the structure of the NB generator is optimized to accommodate the demand for NB characteristics in the AD system. Subsequently, it delves into a detailed discussion of how the addition of nanobubble water (NBW) affects AD performance and the different factors that NB can potentially contribute. As a simple and environmentally friendly additive, NBW was commonly used in the AD process to enhance the fluidity and mass transfer characteristics of digestate. Additionally, NB has the potential to enhance the functionality of different types of microbial enzymes that play crucial roles in the AD process. This includes boosting extracellular hydrolase activities, optimizing coenzyme F420, and improving cellulase function. Finally, it is proposed that NBW has development potential for the pretreatment of substrate and inoculum, with future development being directed towards this aim.

Forecasting municipal solid plastic waste generation and management policy using system dynamics: a case study of Khulna City in Bangladesh.

A comprehensive analysis of municipal solid plastic waste (MSPW) management while emphasizing plastic pollution severity in coastal cities around the world is mandatory to alleviate the augmenting plastic waste footprint in nature. Thus, decision-makers' persuasion for numerous management solutions of MSPW flow-control can be met through meditative systematic strategies at the regional level. To forecast solutions focused on systematic policies, an agent-based system dynamics (ASD) model has been developed and simulated from 2023 to 2040 while considering significant knit parameters for MSPW management of Khulna City in Bangladesh. Baseline simulation results show that per-capita plastic waste generation will increase to 11.6 kg by 2040 from 8.92 kg in 2023. Eventually, the landfilled quantity of plastic waste has accumulated to 70,000 tons within 18 years. Moreover, the riverine discharge has increased to 834 tons in 2040 from a baseline quantity of 512 tons in 2023. So the plastic waste footprint index (PWFI) value rises to 24 by 2040. Furthermore, the absence of technological initiatives is responsible for the logarithmic rise of non-recyclable plastic waste to 1.35*1000=1350 tons. Finally, two consecutive policy scenarios with baseline factors such as controlled riverine discharge, increased collection and separation of plastic waste, expansion of recycle business, and locally achievable plastic conversion technologies have been simulated. Therefore, policy 2, with 69% conversion, 80% source separation, and 50% riverine discharge reduction of MSPW, has been found adequate from a sustainability perspective with the lowest PWFI ranges of 3.97 to 1.07 alongside a per-capita MSPW generation of 7.63 to 10 kg from 2023 till 2040.

Does owning improved latrine facilities enhance the safe disposal of child feces in Africa? a systematic review and meta-analysis.

INTRODUCTION: Improved sanitation refers to those that effectively avoid human contact with excreta in a hygienic manner. Having improved latrines is a key factor in adopting safe ways of disposing of child feces. However, previous studies in Africa that examined how owning improved latrine facilities associated with household child feces disposal practices has shown inconsistent results, and no systematic review of these findings has been done. Therefore, this study aims to synthesize the evidence on the significance of households having improved latrine facilities for safe child feces disposal practices among households with under five-year-old children in Africa. METHODS: The searched databases include: PubMed/Medline, Ovid/Embase, ScienceDirect, AJOL and the Cochrane Library. In the search process, Google Scholar and references of other studies were considered. This review included studies that were published in English without any time restrictions. The outcome of this study was an estimate of the association between the ownership of an improved latrine and the disposal practices of children's feces. Two reviewers used the Excel data extraction tool to extract the relevant data from the studies that were included in the review. Using Stata version 16, a meta-analysis was performed with a random effects statistical model. The inverse index of variance (I2) was used to assess heterogeneity. Forest plots were used to show the pooled estimate with a 95% confidence interval. Publication bias was assessed using Egger's test and a funnel plot. RESULTS: Out of the 616 studies that were retrieved, 15 were included in the systematic review analysis and 10 were included in the meta-analysis. All studies that were included are cross-sectional studies done in Ethiopia, Nigeria, Gambia, Malawi, Eswatini, Ghana, Zambia, and a study used data from sub-Saharan Africa. Improved latrine facilities significantly enhanced the practice of safe child feces disposal, as shown by the overall effect size (OR = 2.74; 95% CI = 1.24-1.35, I2 = 99.95%). In the subgroup analysis by sample size, the presence of improved latrines significantly enhanced safe child feces disposal in studies with sample sizes less than 1000 (OR = 3.24; 95% CI = 2.86-3.62, I2 = 61.38%), while there was no significant difference in studies with sample sizes greater than 1000 (OR = 2.67; 95% CI = 0.69-4.64, I2 = 99.97%). However, studies that involved children under 5 years old indicated that improved latrine facilities significantly enhanced the practice of safe child feces disposal (OR = 4.02; 95% CI = 2.03-6.09; I2 = 99.96%). CONCLUSIONS: In this research study, we examined the ownership of improved latrine facilities among households with five-year-old children to enhance the disposal of child feces in a safer manner in Africa. The high heterogeneity among the studies and the cross-sectional design of the included studies limit the causal inference and generalizability of the findings. Therefore, meta-analyses of longitudinal and experimental studies are needed to confirm the causal relationship between improved latrine facilities and safe child feces disposal practices in Africa.

Potentially toxic elements (PTEs) and ecological risk at waste disposal sites: An analysis of sanitary landfills.

This study presents an analysis of soil contamination caused by Ni, Zn, Cd, Cu, and Pb at municipal solid waste (MSW) landfills, with a focus on ecological risk assessment. The approach aims to assess how different landfill practices and environmental conditions affect soil contamination with potentially toxic elements (PTEs) and associated environmental risks. Soil samples were collected from MSW landfills in Poland and the Czech Republic. The research included a comprehensive assessment of PTEs in soils in the context of global environmental regulations. The degree of soil contamination by PTEs was assessed using indices: Geoaccumulation Index (Igeo), Single Pollution Index (Pi), Nemerow Pollution Index (PN), and Load Capacity of a Pollutant (PLI). The ecological risk was determined using the Risk of PTEs (ERi) and Sum of Individual Potential Risk Factors (ERI). The maximum values of the indicators observed for the Radiowo landfill were as follows: Igeo = 4.04 for Cd, Pi = 24.80 for Cd, PN = 18.22 for Cd, PLI = 2.66, ERi = 744 for Cd, ERI = 771.80. The maximum values of the indicators observed for the Zdounky landfill were as follows: Igeo = 1.04 for Cu, Pi = 3.10 for Cu, PN = 2.52 for Cu, PLI = 0.27, ERi = 25 for Cd, ERI = 41.86. The soils of the tested landfills were considered to be non-saline, with electrical conductivity (EC) values less than 2,000 µS/cm. Varying levels of PTEs were observed, and geostatistical analysis highlighted hotspots indicating pollution sources. Elevated concentrations of Cd in the soil indicated potential ecological risks. Concentrations of Cu and lead Pb were well below the thresholds set by the environmental legislation in several countries. In addition, Ni concentrations in the soils of both landfills indicated that the average levels were within acceptable limits. Principal Component Analysis (PCA) revealed common sources of PTEs. The identification of specific risk points at the Radiowo and Zdounky sites contributes to a better understanding of potential hazards in landfill environments. By establishing buffer zones and implementing regular maintenance programs, emerging environmental problems can be addressed in a timely manner.

Developing active and intelligent biodegradable packaging from food waste and byproducts: A review of sources, properties, film production methods, and their application in food preservation.

Food waste and byproducts (FWBP) are a global issue impacting economies, resources, and health. Recycling and utilizing these wastes, due to processing and economic constraints, face various challenges. However, valuable components in food waste inspire efficient solutions like active intelligent packaging. Though research on this is booming, its material selectivity, effectiveness, and commercial viability require further analysis. This paper categorizes FWBP and explores their potential for producing packaging from both animal and plant perspectives. In addition, the preparation/fabrication methods of these films/coatings have also been summarized comprehensively, focusing on the advantages and disadvantages of these methods and their commercial adaptability. Finally, the functions of these films/coatings and their ultimate performance in protecting food (meat, dairy products, fruits, and vegetables) are also reviewed systematically. FWBP provide a variety of methods for the application of edible films, including being made into coatings, films, and fibers for food preservation, or extracting active substances directly or indirectly from them (in the form of encapsulation) and adding them to packaging to endow them with functions such as barrier, antibacterial, antioxidant, and pH response. In addition, the casting method is the most commonly used method for producing edible films, but more film production methods (extrusion, electrospinning, 3D printing) need to be tried to make up for the shortcomings of the current methods. Finally, researchers need to conduct more in-depth research on various active compounds from FWBP to achieve better application effects and commercial adaptability.

Pyrolysis, a recovery solution to reduce landfilling of residual organic waste generated from mixed municipal waste.

Despite policies to restrict the mixing of organic waste with other general waste and improve its separation at source, municipal solid waste still contains a high proportion of organic waste. The residual organic waste is generated as a by-product of the mechanical treatment of municipal solid waste (MSW) and is mainly disposed in landfills after composting. Its reuse and recovery status varies across European countries. Most countries restrict the use of biostabilised residual waste (BSRW) to landfill cover, whereas others have regulated it as marketable compost. Crucially, BSRW is set to lose its "recycled" status under the revised European Union waste framework, with probably tighter restrictions and increased costs imposed for the landfilling of organic waste. Our research aimed to investigate pyrolysis as an alternative technology to treat the 10-40 mm fraction of BSRW (representing 50% of BSRW generated). Pyrolysis at 700 °C was carried out and feedstock and pyrolysis products were characterized. Mass and energy balances showed that pyrolysis produced hot vapour/gas whose combustion may render the pyrolysis process energetically sustainable. Biochar comprises 30-50% of BRSW mass after removal of glass, metal and stones. Our results indicate that pyrolysis has the potential to create options for contributing to reduce the landfilling of BSRW; however, the presence of residual impurities may limit biochar applications.

Source analysis of chlorine in municipal solid waste under waste classification: a case study of Hangzhou, China.

Inorganic chlorine is susceptible to water and soil salinization due to its non-degradability and high mobility. To clarify the environmental risks associated with the active inorganic chlorine in municipal solid waste (MSW), the specific characteristics and contributions of inorganic chlorine in different MSW categories were investigated in this study. MSW samples were collected from eight representative waste classification residential areas in Hangzhou, China. It was found that the inorganic chlorine content in different MSW categories varied significantly (0-113 mg/g). Perishable waste, paper, and plastic were found to be the main sources of inorganic chlorine in MSW. A four-category classification system was used to quantify the contribution of inorganic chlorine from each waste category. It was found that the misclassification of inorganic chlorine contributions from perishable waste and other waste accounted for 51.96% and 48.04%, respectively. However, when correctly classified into the four-category system, their contributions were reduced to 67.14% and 30.65%, respectively. Therefore, MSW classification showed a significant reduction in the overall contribution of inorganic chlorine. The misclassification reduces the contribution of inorganic chlorine to 48.04%, while correct classification increases the reduction to 69.35%.

Prophet time series modeling of waste disposal rates in four North American cities.

In this study, three different univariate municipal solid waste (MSW) disposal rate forecast models (SARIMA, Holt-Winters, Prophet) were examined using different testing periods in four North American cities with different socioeconomic conditions. A review of the literature suggests that the selected models are able to handle seasonality in a time series; however, their ability to handle outliers is not well understood. The Prophet model generally outperformed the Holt-Winters model and the SARIMA model. The MAPE and R2 of the Prophet model during pre-COVID-19 were 4.3-22.2% and 0.71-0.93, respectively. All three models showed satisfactory predictive results, especially during the pre-COVID-19 testing period. COVID-19 lockdowns and the associated regulatory measures appear to have affected MSW disposal behaviors, and all the univariate models failed to fully capture the abrupt changes in waste disposal behaviors. Modeling errors were largely attributed to data noise in seasonality and the unprecedented event of COVID-19 lockdowns. Overall, the modeling errors of the Prophet model were evenly distributed, with minimum modeling biases. The Prophet model also appeared to be versatile and successfully captured MSW disposal rates from 3000 to 39,000 tons/month. The study highlights the potential benefits of the use of univariate models in waste forecast.

Impacts of regional socioeconomic statuses and global events on solid waste research reflected in six waste-focused journals.

The research pertaining to solid waste is undergoing extensive advancement, thereby necessitating a consolidation and analysis of its research trajectories. The existing biblio-studies on solid waste research (SWR) lack thorough analyses of the factors influencing its trends. This article presents an innovative categorization framework that categorizes publications from six SWR journals utilizing Source Latent Dirichlet Allocation. First analyse changes in publication numbers across main categories, subcategories, journals, and regions, providing a macro-level study of SWR. Temporal analysis of keywords supplements a micro-level study of SWR, which highlights that emerging technologies with low Technology Readiness Level receive significant attention, while studies on widespread technologies are diminishing. Additionally, this study demonstrates the substantial influence of socioeconomic factors and previous SWR publications on current and future SWR trends. Finally, the article confirms the impact of global events on SWR trends by examining the structural breakpoints of SWR and their correlation with global events.

Quality degradation in glass recycling: substitutability model proposal.

The sustainability assessment of waste management systems requires tools capable of evaluating material quality degradation during recycling. Existing research has predominantly focused on the development of substitutability models for plastics, leaving a gap in addressing other materials like glass. Glass is commonly regarded as endlessly recyclable, even though its actual recyclability depends on several crucial factors, such as colour and pollutant contamination. Many Life Cycle Assessment (LCA) studies in this field assume a one-to-one substitution coefficient, neglecting material deterioration and inaccurately representing real-world scenarios. This study proposes and assesses a substitutability model for glass, aiming to measure the replacement extent between virgin materials and recycled crushed glass (cullet). The methodology is based on two key factors: technical quality substitutability, considering impurities and colour contaminations in cullet, and market applicability, accounting for market demand. Once formulated, the model was applied to a European case study on glass waste treatment. Two scenarios were considered: one assuming complete substitution between cullet and raw materials, the other incorporating quality degradation. Findings indicate that, accounting for quality degradation, only 83% of cullet effectively replaces raw materials, resulting in a decrease of the benefit associated with recycling of 13-23% for the different examined impact categories, compared to complete replacement assumption. This underscores the importance of considering quality deterioration in glass recycling impact assessments.

The potential impact of the new 'Right to Repair' rules on electrical and electronic equipment waste: A case study of the UK.

Every year an estimated two million tonnes of waste electrical and electronic equipment (WEEE) are discarded by householders and companies in the United Kingdom (UK). While the UK has left the European Union (EU), its waste-related policies still mirror those of the EU, including the WEEE-related policies. Motivated by the recent introduction the so-called 'Right to Repair' policy for electrical and electronic equipment (EEE) across the EU and UK, this paper aims to demonstrate that, depending on the commitment and behavioural changes by the consumers and the government, the future of the WEEE management of the UK will vary. To this end, focusing on landfilled WEEE reduction we develop a generic system dynamics model and apply it to eleven WEEE categories. They depict the flow of EEE and WEEE representing the interaction among the stakeholders (e.g., consumers and producers of EEE) and relevant government regulations of the UK. Our four scenario analyses find that longer use of EEE and better WEEE collection seem to be effective in reducing landfilled WEEE, while more reuse and more recycling and recovery have negligible impacts, despite excluding the additional generation of landfilled WEEE as a result of recycling and recovery. Comparing with the business-as-usual scenario, one year longer EEE use and 10% more of WEEE collection could at maximum reduce landfilled WEEE by 14.05% of monitoring and control instruments and 93.93% of display equipment respectively. Backcasting scenario analyses reveal that significant efforts are required to reduce the targeted amounts.

Early detection of deep-seated smouldering fires in wood waste storage using ERT.

Incidents of waste and biofuel fires are common at all stages of the waste recycling chain and have grave implications for business, employees, firefighters, society, and environment. An early detection of waste and biofuel fires in the smouldering stage could save precious lives, resources, and our environment. Existing fire detection methodologies e.g. handheld temperature sensors, IR cameras, gas sensors, and video and satellite-based monitoring techniques have inherent limitations to efficiently detect smouldering fires. An attempt was made to explore the potential of electrical resistivity tomography (ERT) as an alternate tool to address the problem. In the experiments an externally powered resistive wire was employed to initiate the smouldering fire inside the test material (wood pellets, wood shavings, wood fines). Time series of ERT that followed the initiation and development of smouldering were recorded using an automated monitoring instrument setup. The actual geometry of the experimental sample container and electrode setup was integrated in the 3D finite element method (FEM) model grid to perform inverse numerical modelling (inversion) and to develop resistivity tomographic images. The study shows a sharp increase in ratio of resistivity (R/Ro ≥ 50 %) in the test material in the region of smouldering hotspot and demonstrates the potential use of ERT technique for the detection of smouldering hotspots in silos and pile storage of organic material such as wood-based fuels, wood waste, coal, municipal solid waste (MSW), recyclables etc. More research is however required for enabling the use of this technique at the practical scale for different storage conditions.

Effects of carbon-based conductive materials on semi-continuous anaerobic co-digestion of organic fraction of municipal solid waste and waste activated sludge.

Organic fraction of municipal solid waste (OFMSW) and waste activated sludge (WAS) are the most produced organic waste streams in urban centres. Their anaerobic co-digestion (AcoD) allows to generate methane (CH4) and digestate employable as renewable energy source and soil amendment, respectively, fully in accordance with circular bioeconomy principles. However, the widespread adoption of such technology is limited by relatively low CH4 yields that fail to bridge the gap between benefits and costs. Among strategies to boost AcoD of OFMSW and WAS, use of conductive materials (CMs) to promote interspecies electron transfer has gained increasing attention. This paper presents one of the few experimental attempts of investigating the effects of four different carbon(C)-based CMs (i.e., granular activated carbon - GAC, graphite - GR, graphene oxide - GO, and carbon nanotubes - CNTs) separately added in semi-continuous AcoD of OFMSW and thickened WAS. The presence of C-based CMs has been observed to improve CH4 yield of the control process. Specifically, after 63 days of operation (concentrations of GAC and GR of 10.0 g/L and of GO and CNTs of 0.2 g/L), 0.186 NL/gVS, 0.191 NL/gVS, 0.203 NL/gVS, and 0.195 NL/gVS of CH4 were produced in reactors supplemented with GAC, GR, GO, and CNTs, respectively, compared to 0.177 NL/gVS produced in the control process. Likewise, at the end of the test (i.e., after 105 days at concentrations of C-based CMs half of the initial ones), CH4 yields were 0.193 NL/gVS, 0.201 NL/gVS, 0.211 NL/gVS, and 0.206 NL/gVS in reactors supplemented with GAC, GR, GO, and CNTs, respectively, compared to 0.186 NL/gVS of the control process. Especially with regard to GR, GO, and CNTs, results obtained in the present study represent a significant advance of the knowledge on the effects of such C-based CMs to realistic and scalable AD process conditions respect to previous literature.

Low-intensity alternating ventilation achieves effective humification during food waste composting by enhancing the intensity of microbial interaction and carbon metabolism.

Vertical static composting is an efficient and convenient technology for the treatment of food waste. Exploring the impact of oxygen concentration levels on microbial community structure and functional stability is crucial for optimizing ventilation technology. This study set three experimental groups with varying ventilation intensities based on self-made alternating ventilation composting reactor (AL2: 0.2 L kg-1 DM·min-1; AL4: 0.4 L kg-1 DM·min-1; AL6: 0.6 L kg-1 DM·min-1) to explore the optimal alternating ventilation rate. The results showed that the cumulative ammonia emission of AL2 group reduced by 25.13% and 12.59% compared to the AL4 and AL6 groups. The humification degree of the product was 1.18 times and 1.25 times higher than the other two groups. AL2 increased the relative abundance of the core species Saccharomonospora, thereby strengthening microbial interaction. Low-intensity alternating ventilation increased the carbon metabolism levels, especially aerobic_chemoheterotrophy, carbohydrate and lipid metabolism. However, it simultaneously reduced nitrogen metabolism. Structural equation model analysis demonstrated that alternating low-intensity ventilation effectively regulated both microbial diversity (0.81, p < 0.001) and metabolism (0.81, p < 0.001) by shaping the composting environment. This study optimized the intensity of alternating ventilation and revealed the regulatory mechanism of community structure and metabolism. This study provides guidance for achieving efficient and low-consumption composting.

Enzyme modified biodegradable plastic preparation and performance in anaerobic co-digestion with food waste.

A modified biodegradable plastic (PLA/PBAT) was developed by through covalent bonding with proteinase K, porcine pancreatic lipase, or amylase, and was then investigated in anaerobic co-digestion mixed with food waste. Fluorescence microscope validated that enzymes could remain stable in modified the plastic, even after co-digestion. The results of thermophilic anaerobic co-digestion showed that, degradation of the plastic modified with Proteinase K increased from 5.21 ± 0.63 % to 29.70 ± 1.86 % within 30 days compare to blank. Additionally, it was observed that the cumulative methane production increased from 240.9 ± 0.5 to 265.4 ± 1.8 mL/gVS, and the methane production cycle was shortened from 24 to 20 days. Interestingly, the kinetic model suggested that the modified the plastic promoted the overall hydrolysis progression of anaerobic co-digestion, possibly as a result of the enhanced activities of Bacteroidota and Thermotogota. In conclusion, under anaerobic co-digestion, the modified the plastic not only achieved effective degradation but also facilitated the co-digestion process.

A review on the evaluation models and impact factors of greenhouse gas emissions from municipal solid waste management processes.

The total amount of global municipal solid waste (MSW) will reach 3.5 billion tons by 2050, thereby bringing tremendous environmental pressure, especially global warming. Large amounts of greenhouse gases (GHGs) have been released during MSW management (MSWM). Accounting for GHG emissions is a prerequisite for providing recommendations on appropriate treatment options to mitigate emissions from MSWM systems. There are many methods involved in estimating emissions. This paper summarizes the computing models commonly used in each process of the integrated MSWM system and emphasizes the influence of parameters and other factors. Compared with other disposal methods, landfilling has the highest emissions, commonly estimated using first-order decay (FOD) methods. Emission reduction can be realized through waste to energy (WtE) and resource recovery measures. IPCC is commonly used for calculating direct emissions, while LCA-based models can calculate emissions including upstream and downstream processes, whose results depend on assumptions and system boundaries. The estimation results of models vary greatly and are difficult to compare with each other. Besides, large gaps exist between the default emission factors (EFs) provided by models and those F measured in specific facilities. These findings provide a systematic view for a bettering understanding of MSW emissions as well as the estimating methods and also reveal the key points that need be developed in the future.

Meta-analysis addressing the potential of antibiotic resistance gene elimination through aerobic composting.

The significant increase in antibiotic resistance genes (ARGs) in organic solid wastes (OSWs) has emerged as a major threat to the food chain. Aerobic composting is a widely used technology for OSW management, with the potential to influence the fate of AGRs. However, the variability of the ARG elimination effects reported in different studies has highlighted the uncertainty regarding the effects of composting on ARGs. To identify the potential of composting in reducing ARG and the factors (e.g., composting technologies and physiochemical properties) influence ARG changes, a meta-analysis was conducted with a database including 4,232 observations. The abundances of ARGs and mobile genetic elements (MGEs) can be substantially reduced by 74.3% and 78.8%, respectively, via aerobic composting. During composting, the ARG levels in chicken and swine manure tended to be reduced more significantly (81.7% and 78.0%) compared to those in cattle manure (52.3%) and sewage sludge (32.6%). The reduction rate of sulfonamide resistant genes was only 35.3%, which was much lower than those of other types. MGEs and composting duration (CD) were identified as the most important factors driving ARG changes during composting. These findings provide a comprehensive insight into the effects of composting on ARG reduction, which may help prevent the transmission in food systems.