Marginal Gingival Thickness Assessment in Three- To Six-Year-Old Preschool Children.

Purpose: Although gingival thickness has been extensively studied in permanent dentition, the literature regarding marginal gingival thickness in primary dentition is insufficient. The purpose of this study was to assess the variations in marginal gingival thickness in preschool-age children. Methods: A cross-sectional study of 4,109 primary teeth was conducted. Using a reamer, the transgingival probing method was employed to assess marginal gingival thickness in healthy preschoolers. Inter-examiner and intra-examiner reproducibility were assessed via the intraclass correlation coefficient. Results: Descriptive statistics revealed that primary maxillary left second molars had the highest mean marginal gingival thickness (1.06 mm), whereas primary mandibular right central incisors had the lowest mean marginal gingival thickness (0.74 mm). Gender-based independent sample t-tests revealed significant differences in the values of primary maxillary right canines (females had greater values than males; P=0.03) and primary mandibular right first molars (males had greater values than females; P=0.01). An inter-arch comparison revealed significant differences between the primary second molars (maxillary more than mandibular; P=0.001). Conclusions: This study reports the first documented marginal gingival thicknesses of primary dentition. It reveals substantial variations in the values of primary maxillary right canines and primary mandibular right first molars and between primary maxillary and mandibular second molars.

Influence of mucosal tissue height on implant crestal bone: A 10-year follow-up of a controlled clinical trial.

OBJECTIVE: To evaluate the 10-year influence of soft tissue height (STH) on crestal bone level changes (CBC) in bone-level implants with non-matching internal conical connections. MATERIAL & METHODS: From the initial 97 patients, 59 (19 men, 40 women, age 55.86 ± 9.5 years) returned for the recall visit. Based on baseline STH, they were categorized into T1 (thin STH ≤2 mm, n = 33), T2 (thin STH augmented with allogenic tissue matrix (ATM), n = 32), and C (thick STH >2 mm, n = 32). Implants were placed in the posterior mandible using a one-stage approach and received single screw-retained restorations. Clinical (PPD, BOP, PI) and radiographic examinations were conducted after 10 years, with CBC calculated mesial and distal to each implant. RESULTS: After 10 years, implants in surgically thickened (T2) or naturally thick STH (C) showed bone gains of 0.57 ± 0.55 mm and 0.56 ± 0.40 mm, respectively (p < 0.0001) shifting from an initial CBC of -0.21 ± 0.33 mm to 0.36 ± 0.29 mm in the thick STH group and -0.2 ± 0.35 mm to 0.37 ± 0.29 mm in the surgically thickened STH group. Implants in naturally thin STH yielded a non-significant trend of bone loss (-0.12 ± 0.41 mm; p > 0.05). CONCLUSIONS: Implants in thin STH (≤2 mm) exhibited greater CBC over the study period. Significant bone gains were observed in thick STH cases, indicating that naturally thick STH or STH augmentation with ATM may contribute to maintain CBC in long-term around implants. CLINICAL SIGNIFICANCE: This is the first long-term follow-up study suggesting that adequate soft tissue height around implants helps maintain stable peri­implant bone levels. While tissue thickness plays a key role, other factors also interact with peri­implant tissue height to sustain crestal bone stability over time.

Integrated correlation analysis of the thickness of buccal bone and gingiva of maxillary incisors.

OBJECTIVE: This study aimed to validate the integrated correlation between the buccal bone and gingival thickness of the anterior maxilla, and to gain insight into the reference plane selection when measuring these two tissues before treatment with implants. METHODOLOGY: Cone beam computed tomography (CBCT) and model scans of 350 human subjects were registered in the coDiagnostiX software to obtain sagittal maxillary incisor sections. The buccal bone thickness was measured at the coronal (2, 4, and 6 mm apical to the cementoenamel junction [CEJ]) and apical (0, 2, and 4 mm coronal to the apex plane) regions. The buccal gingival thickness was measured at the supra-CEJ (0, 1mm coronal to the CEJ) and sub-CEJ regions (1, 2, 4, and 6 mm apical to the CEJ). Canonical correlation analysis was performed for intergroup correlation analysis and investigation of key parameters. RESULTS: The mean thicknesses of the buccal bone and gingiva at different levels were 0.64~1.88 mm and 0.66~1.37 mm, respectively. There was a strong intergroup canonical correlation between the thickness of the buccal bone and that of the gingiva (r=0.837). The thickness of the buccal bone and gingiva at 2 mm apical to the CEJ are the most important indices with the highest canonical correlation coefficient and loadings. The most and least prevalent subgroups were the thin bone and thick gingiva group (accounting for 47.6%) and the thick bone and thick gingiva group (accounting for 8.6%). CONCLUSION: Within the limitations of this retrospective study, the thickness of the buccal bone is significantly correlated with that of the buccal gingiva, and the 2 mm region apical to the CEJ is a vital plane for quantifying the thickness of these two tissues.

[Assessment of the condition of organs and tissues of the oral cavity in people with dentition defects against the background of metabolic syndrome]. / Otsenka sostoyaniya organov i tkanei rta u lits s defektami zubnykh ryadov na fone metabolicheskogo sindroma.

OBJECTIVE: The aim of the study is comparative analysis of the condition of oral organs and tissues in people with metabolic syndrome (MS) of varying severity before orthopedic dental rehabilitation based on dental implants. MATERIAL AND METHODS: 255 patients (151 women and 104 men) aged from 35 to 65 years were examined. 3 groups were formed: 2 study groups and a comparison group. Groups 1 and 2 included individuals with excess body weight and MS. The control group consisted of 88 people without MS. An index assessment of the condition of the periodontium and tissue structures of the alveolar bone (according to cone-beam computed tomography), microcirculation in the gingival mucosa was carried out using laser Doppler flowmetry. RESULTS: The analysis of the periodontal condition indicators showed that in all groups of patients with MS, periodontal pathology occurred, the value of which was significantly higher than in patients of the control group (p <0.05). The analysis of bone tissue according to CBCT data showed that the most favorable conditions (type 1 and type 2 of bone according to Misch) for dental implantation are found in people without MS, respectively 3.5% and 35.1% of cases. The intensity of blood flow (σ) was 21.2% lower in group 1 and 48% in group 2, compared with the control group. Vasomotor activity (Kv) was 13.2% lower in the first group and 35% lower in the second group. A decrease in amplitudes in the area of all rhythms in the LDF gram was found: low-frequency - by 15.6%, high-frequency - by 16.9%, pulse - by 3.6%. CONCLUSION: Changes occurring in the organs and tissues of the mouth against the background of MS of varying severity lead to a decrease in tissue perfusion with blood and blood flow activity, a local decrease in bone density, and as a result, pathological changes in periodontal tissues. Before performing dental rehabilitation, it is necessary to take into account all the risks of possible complications caused by the general condition of organs and systems of people with MS.

Assessment of gingival translucency at the mandibular incisors with two different probing systems. A cross sectional study.

OBJECTIVES: Increasing evidence indicates that the thickness of periodontal soft tissues plays an important role in various clinical scenarios, thus pointing to the need of further clinical research in this area. Aim of the present study was to assess gingival thickness at the mandibular incisors by translucency judgement with two different probes and to validate if these methods are comparable and applicable as diagnostic tools. MATERIALS AND METHODS: A total of 200 participants were included; gingival tissue thickness was measured by judging probe translucency at both central mandibular incisors, mid-facially on the buccal aspect of each tooth using a standard periodontal probe and a set of color-coded probe, each with a different color at the tip, i.e. Colorvue Biotype Probe (CBP). Frequencies and relative frequencies were calculated for probe visibility. Agreement between the standard periodontal probe and the CBP was evaluated via the kappa statistic. RESULTS: When the periodontal probe was visible, the frequency of CBP being visible was very high. Kappa statistic for the agreement between the standard periodontal probe and the CBP was 0.198 (71.5% agreement; p-value < 0.001) for tooth 41 and 0.311 (74.0% agreement; p-value < 0.001) for tooth 31, indicating a positive association of the two methods. CONCLUSIONS: An agreement that reached 74% was estimated between the standard periodontal probe and the color-coded probe at central mandibular incisors.  CLINICAL RELEVANCE: In the context of the present study, the two methods of evaluating gingival thickness seem to produce comparable measurements with a substantial agreement. However, in the 1/4 of the cases, the visibility of the color-coded probe could not assist in the categorization of the gingival phenotype.

Comparison of gingival thickness by CBCT versus transgingival probing and estimation of cut-off values for gingival phenotype - A cross-sectional study in adults.

AIM: Gingival phenotype (GP) is regarded as a valuable indicator for forecasting the probability of attaining favourable aesthetic and functional results with orthodontic treatment. This study aimed to investigate the accuracy and reproducibility of cone beam computed tomography (CBCT) for assessing gingival thickness (GT) in both arches compared to the transgingival probing method. The secondary objective was to determine the optimal cut-off values for GT using CBCT. METHODS: This cross-sectional study was conducted where GP was determined based on the probe transparency method (TRAN). The GT measurements were obtained by both methods at 2mm from the free gingival margin (FGM) for all teeth anterior to the first molar. The data was statistically analysed using intraclass correlation coefficient (ICC), Bland-Altman plots, and receiver operating characteristic (ROC) curves. The statistical significance level was set at a P-value<0.05. RESULTS: The study included 60 subjects (1200 teeth). The mean GT in both the maxillary (1.14±0.17mm) and mandibular (0.94±0.15mm) arches was significantly greater (P<0.05) for the transgingival probing method than for the CBCT method. As shown in the Bland-Altman plot, the bias between the two methods was greater in the maxillary jaw (0.060; 95% CI: 0.044 to 0.076) and in individuals with a thick GP (0.096; 95% CI: 0.082 to 0.109). The optimal values for GT measurements were 1.15mm for the maxillary jaw, 1.02mm for the mandibular jaw, 1.02mm for males, and 1.09mm for females. CONCLUSIONS: CBCT exhibited notable precision in diagnosing GT, while demonstrating minimal disparities compared to the conventional transgingival probing technique, particularly evident in thin GPs, and in the mandibular dental arch. The constraints associated with the utilization of CBCT were observed in the maxillary arch and in cases with thick GP.

Exploring Digital Gingival Shade Matching in Students.

PURPOSE: To study the degree of accuracy in gingival shade matching of undergraduate students using a computer application. MATERIALS AND METHODS: In total, 76 undergraduate dental students' gingival shade selection abilities were evaluated using an in-house developed computer application. A total of 15 intraoral gingival photographs and 21 pink gingival color porcelain samples were used. The environmental conditions were standardized, and no time limit was set for answering in the computer application. RESULTS: Fourteen gingival color samples (66.6%) were not useful for representing the studied gingival shades. Not all natural gingival colors studied were represented within the 50.50% acceptability limits of the pink samples. There were no statistically significant differences between men and women in terms of "hit" percentages. The highest correlation coefficient (in absolute value) was for the L* coordinate (the darker the gingiva in the picture, the higher the hit rate for choosing the "ideal" shade tab); however, none of the linear correlation coefficients were statistically significant. CONCLUSIONS: Not all colors provided in the pink ceramic system were useful for subjective gingival selection. There were no statistically significant differences between male and female dental students in gingival color perception. The L* coordinate was the only one that influenced the correct perception of gingival color by dental students, and it did so more in women than in men.

Assessment of the correlation between supracrestal gingival tissue dimensions and other periodontal phenotypes components via the digital registration method: a cross­sectional study in a Chinese population.

BACKGROUND: Supracrestal gingival tissue dimensions (SGTDs) has been considered to be an essential element of periodontal phenotype (PP) components. This study aimed to explore the relationship between SGTDs and other PP components by digital superposition method that integrated cone beam computed tomography (CBCT) with intraoral scanning. METHODS: This cross-sectional study was conducted at the Stomatology Hospital of Fujian Medical University. Participants were recruited based on the inclusion and exclusion criteria. The data obtained from the digital scanner (TRIOS 3, 3Shape, Denmark) and CBCT images were imported into the TRIOS software (Implant Studio, 3Shape, Denmark) for computing relevant parameters. The significant level was set at 0.05. RESULTS: A total of 83 participants with 498 maxillary anterior teeth were finally included. The mean values of supracrestal gingival height (SGH) and the distance from the cementoenamel junction (CEJ) to the crest of the alveolar ridge (CEJ-ABC) on the buccal site were significantly higher than palatal SGH (SGH-p) and palatal CEJ-ABC (CEJ-ABC-p). Men exhibited taller CEJ-ABC and SGH-p than women. Additionally, tooth type was significantly associated with the SGH, SGH-p and CEJ-ABC-p. Taller SGH was associated with wider crown, smaller papilla height (PH), flatter gingival margin, thicker bone thickness (BT) and gingival thickness (GT) at CEJ, the alveolar bone crest (ABC), and 2 mm apical to the ABC. Smaller SGH-p displayed thicker BT and GT at CEJ, the ABC, and 2 and 4 mm apical to the ABC. Higher CEJ-ABC showed lower interproximal bone height, smaller PH, flatter gingival margin, thinner GT and BT at CEJ, and 2 mm apical to the ABC. Smaller CEJ-ABC-p displayed thicker BT at CEJ and 2 and 4 mm apical to the ABC. On the buccal, thicker GT was correlated with thicker BT at 2 and 4 mm below the ABC. CONCLUSION: SGTDs exhibited a correlation with other PP components, especially crown shape, gingival margin and interdental PH. The relationship between SGTDs and gingival and bone phenotypes depended on the apico-coronal level evaluated. TRIAL REGISTRATION: This study was approved by the Biomedical Research Ethics Committee of Stomatology Hospital of Fujian Medical University (approval no. 2023-24).

Clinical efficacy of intraoral ultrasonography versus transgingival probing for measurement of gingival thickness in different gingival biotypes: a clinical trial.

BACKGROUND: Transgingival probing is conventionally used for gingival thickness (GT) measurement. However, invasiveness is a major drawback of transgingival probing. Thus, researchers have been in search of alternative methods for measurement of GT. This study compared the clinical efficacy of intraoral ultrasonography and transgingival probing for measurement of GT in different biotypes. MATERIALS AND METHODS: This clinical trial was conducted on 34 patients requiring crown lengthening surgery. GT was measured at 40 points with 2- and 4-mm distances from the free gingival margin (FGM) of anterior and premolar teeth of both jaws in each patient by an intraoral ultrasound probe. For measurement of GT by the transgingival probing method, infiltration anesthesia was induced, and a #25 finger spreader (25 mm) was vertically inserted into the soft tissue until contacting bone. The inserted length was measured by a digital caliper with 0.01 mm accuracy. All measurements were made by an operator with high reliability under the supervision of a radiologist. Data were analyzed by t-test, Power and Effect Size formula, and intraclass correlation coefficient (ICC). RESULTS: The two methods were significantly different in measurement of GT in both thick and thin biotypes at 2- and 4-mm distances (P < 0.001). The two methods had a significant difference in both the mandible (P < 0.001) and maxilla (P < 0.001) and in both the anterior (P < 0.003) and premolar (P < 0.003) regions. Although the difference was statistically significant in t-tests, the power and effect formula proved it to be clinically insignificant. Also, the ICC of the two methods revealed excellent agreement. CONCLUSION: The results showed optimal agreement of ultrasound and transgingival probing for measurement of GT. TRIAL REGISTRATION: The study was approved by the ethics committee of Shahid Beheshti University of Medical Sciences on 2021-12-28 (IR.SBMU.DRC.REC.1400.138) and registered in the Iranian Registry of Clinical Trials on 2022-03-14 (IRCT20211229053566N1).

Gingival thickness and gingival width in children: a cross-sectional study utilizing ultrasonography.

PURPOSE: To measure the gingival phenotype-related features, gingival thickness (GT) and gingival width (GW), in healthy children and to investigate their association between them, with age, gender, tooth-type and arch. METHODS: The gingival sites of 1029 teeth were included from 64 children (36 males and 28 females), with primary and mixed dentition, attending the paediatric dental clinic of Aristotle University, Thessaloniki. GT and GW were measured ultrasonically and with a periodontal probe, respectively. Mixed effects linear regression models were used to evaluate the association of gingival thickness and gingival width with the under-investigation parameters. Spearman's correlation coefficient was used to evaluate correlation between GT and GW. RESULTS: Significantly thicker gingiva is found in posterior teeth compared to anterior teeth, in permanent teeth versus primary teeth and in maxillary teeth in comparison to mandibular teeth (p value < 0.001). Regarding GW, significantly wider gingiva is noted in posterior regions (p value = 0.022) and the maxilla (p value < 0.001). Gender-wise and concerning age GT and GW are not significantly affected. A weak and positive correlation between GT and GW is noted (rho 0.30, p < 0.001). CONCLUSIONS: GT and GW present significant associations with arch and tooth-type. Findings from this study fulfil the further understanding of GT and GW of paediatric patients that are investigated sparsely throughout the literature and demonstrate an accurate, painless and simple method to map the gingiva.

Trueness and precision of an intraoral scanner on abutments with subgingival vertical margins: An in vitro study.

OBJECTIVES: This study aimed to evaluate the accuracy of an intraoral scanner (IOS - Medit i700) on tooth abutments with vertical preparations at 2 depths below the free gingival margin, and to determine if the IOS can reproduce the area beyond the finish surface of the tested preparation geometry. METHODS: Two abutments for a maxillary first molar were designed by means of CAD software, with vertical preparations set at 1 and 2 mm below the gingiva. These abutments were subsequently printed in resin and placed on a reference model. The reference files consisted of scans made using a metrological machine on these abutments. Ten scans were made with the tested IOS on each sample, resulting in two study groups. The scans from the experimental groups were labeled "V-1″ for vertical preparation at 1 mm below the gingival margin and "V-2″ for 2 mm below. The analysis of these scans was performed using Geomagic Control X (3D SYSTEMS) to assess their trueness and precision in µm. Descriptive statistics with a 95 % confidence interval were employed, alongside independent sample tests, to ascertain any differences between the groups (α=0.05). RESULTS: Statistically significant differences were not found both for trueness (p=.104) and precision (p=.409), between the tested geometries. The mean values for trueness were V-1 = 37.5[31.4-43.6]; V-2 = 32.6[30.6-34.6]. About the precision, the mean values were V-1 = 20.5[8.4-32.5]; V-2 = 18.4[8.2-28.5]. In both the study groups, it was possible to detect the surface beyond the finish area. CONCLUSIONS: Within the limitations of this study, vertical preparation design allows for registration of the tooth anatomy beyond the finish area with IOS. Moreover, the mean accuracy values were clinically acceptable at both 1 and 2 mm below the gingival margin.

Relationship between soft tissue dimensions and tomographic radial root position classification system for immediate implant installation.

The aim of this study was to evaluate the relationship between soft tissue dimensions and radial root position (RRP) classification for immediate implant placement on maxillary anterior teeth. Maxillary anterior teeth (n = 420) were analyzed in the radial plane of cone beam computed tomography (CBCT) scans. Each tooth was classified according to its RRP: class I, (IA, IB); class II (IIA, IIB) class III; class IV, and class V. Soft tissue thickness at different landmarks, supracrestal soft tissue height, and crestal bone thickness were measured in CBCT. Keratinized tissue width was clinically measured. Gingival phenotype (thick or thin) was evaluated by transparency of the periodontal probe and at the landmark 2 mm from the gingival margin in CBCT. Class I tooth position accounted for 31.7%, class II for 45%, class III for 13.3%, class IV for 0.5%, and class V for 9.5%. The gingival phenotype was associated with RRP (χ2 test, p < 0.05). Soft tissue dimensions were significantly different over RRP classes (ANOVA and Tukey tests, p < 0.05). Types IA and IIA presented both thick soft and hard tissues. When planning immediate implants in the anterior maxilla, soft tissue dimensions evaluation should be incorporated into RRP classification to increase the accuracy and predictability of treatment outcomes.

The use of digital technologies in peri-implant soft tissue augmentation - A narrative review on planning, measurements, monitoring and aesthetics.

OBJECTIVE: To identify the different uses and modalities of digital technologies to diagnose, plan and monitor peri-implant soft tissue conditions and aesthetics. METHODS: A comprehensive narrative review of pertinent literature was conducted, critically appraising key digital technologies that may assist peri-implant soft tissue augmentation and assessment. An electronic search on four databases including studies published prior to 1st July 2023 was performed and supplemented by a manual search. RESULTS: Predominantly, tools such as cone beam computed tomography (CBCT), intraoral scanning (iOS), intraoral ultrasonography and digital spectrophotometry were commonly to assess and monitor peri-implant soft tissues. The main clinical and research applications included: (i) initial assessment of mucosal thickness, supra-crestal tissue height and keratinized mucosa width, (ii) evaluation of peri-implant soft tissue health and inflammation, (iii) monitoring profilometric changes and midfacial mucosal margin stability over time and (iv) aesthetic evaluation through colour assessment. While evidence for some digital tools may be limited, the integration of digital technologies into peri-implant soft tissue management holds great promise. These technologies offer improved precision, comfort and speed in assessment, benefiting both patients and clinicians. CONCLUSION: As digital technologies progress, their full potential in peri-implant soft tissue augmentation and their value will become more evident with ongoing research. Embracing these innovations and their potential benefits is recommended to ensure that during progress in implant dentistry, patient care is not hindered.

Risk indicators for gingival recession in the esthetic zone: A cross-sectional clinical, tomographic, and ultrasonographic study.

BACKGROUND: To evaluate the risk indicators associated with midfacial gingival recessions (GR) in the natural dentition esthetic regions. METHODS: Cone-beam computed tomography (CBCT) results of thirty-seven subjects presenting with 268 eligible teeth were included in the cross-sectional study. Clinical measurements included presence/absence of midfacial GR; the depth of the midfacial, mesial, and distal gingival recession; the recession type (RT); keratinized tissue width (KT); and attached gingiva width (AG). Questionnaires were utilized to capture patient-reported esthetics and dental hypersensitivity for each study tooth. Buccal bone dehiscence (cBBD) and buccal bone thickness (cBBT) were measured on the CBCT scans. High-frequency ultrasonography was performed to assess gingival thickness (GT) and buccal bone dehiscence (uBBD). Intraoral optical scanning was obtained to quantify the buccolingual position of each study site (3D profile analysis). Multilevel logistic regression analyses with generalized estimation equations were performed to assess the factors associated with the conditions of interest. RESULTS: The presence of midfacial GR was significantly associated with the history of periodontal treatment for pocket reduction (OR 7.99, p = 0.006), KT (OR 0.62, p < 0.001), cBBD (OR 2.30, p = 0.015), GT 1.5 mm from the gingival margin (OR 0.18, p = 0.04) and 3D profile 1 mm from the gingival margin (OR 1.04, p = 0.001). The depth of midfacial GR was significantly correlated to previous history of periodontal treatment (OR 0.96, p = 0.001), KT (OR -0.18, p < 0.001), presence of bone fenestration (OR 0.24, p = 0.044), and cBBD (OR 0.43, p < 0.001). The depth of midfacial GR was also the only factor associated with patient-reported esthetics (OR -3.38, p = 0.022), while KT (OR 0.77, p = 0.018) and AG (OR 0.82, p = 0.047) were significantly correlated with patient-reported dental hypersensitivity. CONCLUSIONS: Several risk indicators of midfacial and interproximal GR in the esthetic region were identified. The use of imaging technologies allowed for detection of parameters associated with the conditions of interest, and, therefore, their incorporation in future clinical studies is advocated. Ultrasonography could be preferred over CBCT for a noninvasive assessment of periodontal phenotype.

Ultrasonography-Derived Elasticity Estimation of Live Porcine Oral Mucosa.

OBJECTIVES: To investigate the biomechanical properties of porcine oral tissues with in vivo ultrasonography and to compare the difference between oral alveolar mucosa and gingival tissue concerning compressional and tensile mechanical strain. MATERIALS AND METHODS: Sinclair minipigs (6 females and 4 males, 6 to 18 months of age) were anesthetized for ultrasonography. In vivo high-frequency tissue harmonic ultrasound (12/24 MHz) cine-loops were obtained while inducing mechanical tissue stress (0 to 1 N). Post-processing strain analysis was performed in a cardiac speckle tracking software (EchoInsight®). Region of interest (ROI) was placed for gingival and alveolar mucosa tissues for longitudinal (compressional) and tensile strain analyses. A calibrated gel pad was employed to determine the absolute force (pressure) for the measured tissue strain response function. The resulting elasticity data was statistically analyzed using custom Matlab scripts. RESULTS: In total, 38 sonography cine-loops around the third premolars were included in the investigation. The longitudinal strain of alveolar mucosa ε AM L was found to be significantly (P < .05) larger than that of gingiva ε G L . Across the measured force range, ε AM L ~ 1.7 × Îµ G L . Significant differences between alveolar mucosa and gingiva tissues were found for all forces. The tensile strain of the alveolar mucosa ε AM T was found to be ~2 × Îµ G T (on the epithelial surface of the gingiva). Both were statistically significantly different for forces exceeding ~0.08 N. At depth, that is, 500 and 1000 µm below the epithelial surface, the gingiva was found to have less ability to stretch contrary to the alveolar mucosa. Gingival tissue at 500 µm depth has significantly less tensile strain than at its surface and more than at 1000 µm depth. In contrast, the tensile strain of alveolar mucosa is largely independent of depth. CONCLUSION: Ultrasonography can reveal significant differences in oral alveolar mucosal and gingival elastic properties, such as compressional and tensile strain. Under minute forces equivalent to 10 to 40 g, these differences can be observed. As dental ultrasound is a chairside, and noninvasive modality, obtaining real-time images might soon find clinical utility as a new diagnostic tool for the objective and quantitative assessment of periodontal and peri-implant soft tissues in clinical and research realms. As ultrasound is a safe modality with no known bioeffects, longitudinal monitoring of areas of concern would be particularly attractive.

Comparative evaluation of pinhole surgical technique with and without A-PRF in the treatment of multiple adjacent recession defects: A clinico radiographic study.

BACKGROUND: To evaluate and compare efficacy of pinhole surgical technique (PST) alone and with advanced platelet rich fibrin (A-PRF) in the management of bilateral multiple adjacent gingival recession defects (MAGRD). METHODS: One hundred and sixty five MAGRD were randomly assigned to control group (treated with PST) and test group (PST with A-PRF). Clinical parameters of gingival recession depth (GRD), gingival recession width (GRW), width of keratinised gingiva (WKG), complete root coverage (CRC) and gingival thickness (GT) on ST-CBCT was measured at 2, 4 and 6 mm apically from the gingival margin. Also, root coverage aesthetic score and patient satisfaction ratings were recorded at baseline, 6 and 12 months postoperatively. RESULTS: Substantial reduction in GRD (Test: 1.29 ± 0.69 mm and Control 0.98 ± 0.30 mm) (p < 0.001) and GRW (Test: 2.03 ± 0.90 mm and control 1.73 ± 0.99 mm) (p < 0.05) with associated gain in WKG and GT was observed (p < 0.001). Mean GT values were increased in both the groups at 2, 4 and 6 mm from the crest. Comparison of Test and Control groups yielded significant reductions in GRD (-0.17 ± 0.56 mm) and WKG (0.73 ± 1.07 mm) favoring the Test group (p < 0.05). Similar increase in GT was observed with better results in Test than control group. (p < 0.001). CONCLUSION: Both groups exhibited sound clinical outcomes with test group offering better resolution of MAGRD in comparison to control group. Also, it enhances clinical and therapeutic end results in terms of attaining reduction in GRD and GRW along with greater gain in KTW and GT. CLINICAL SIGNIFICANCE: PST as a minimally invasive approach has numerous benefits, some of which include the absence of scarring and improved aesthetics linked to faster wound healing. The addition of A-PRF enhances the intended therapy outcomes, which is beneficial for both patients and professionals in the field of periodontics.

A novel approach for gingiva thickness measurements around lower anterior teeth by means of dental magnetic resonance imaging.

OBJECTIVE: This diagnostic accuracy study aims to present the first measurements of gingiva thickness around lower anterior teeth using dental magnetic resonance imaging (MRI) and to compare these measurements with two established methods: (1) gingival phenotype assessment via periodontal probing, and (2) the superimposition of cone-beam computed tomography (CBCT) scans with intraoral scans of teeth and gums. MATERIALS AND METHODS: Ten patients with substantial orthodontic treatment need and anterior mandibular crowding were consecutively included in this clinical case series. After periodontal probing, each patient underwent a CBCT scan, an intraoral scan of the mandible, and an MRI investigation using a novel mandibula 15-channel dental coil. RESULTS: The mean gingiva thickness was 0.72 mm measured on MRI and 0.97 mm measured on CBCT, with a mean difference between the measurement methods of 0.17 ± 0.27 mm (p < 0.001). Measurement agreement between the index tests (MRI and CBCT) and the clinical reference standard (probing) yielded an overall percent agreement of 64.94% and 47.02% for MRI and CBCT, respectively. Teeth with thin phenotypes were associated with lower soft tissue dimensions in both free (MRI: 0.56 mm vs. CBCT: 0.79 mm) and supracrestal gingiva (MRI: 0.75 mm vs. CBCT: 1.03 mm) when compared to those with thick phenotypes. However, only the measurements obtained from MRI scans showed statistically significant differences between the two phenotypes. CONCLUSION: Dental MRI successfully visualizes delicate structures like the gingiva in the anterior mandible and achieves a high correlation with superimposed CBCT scans, with clinically acceptable deviations. CLINICAL RELEVANCE: The present study helps to establish dental MRI as a radiation-free alternative to conventional radiographic methods.

Evaluation Of Gingival Biotype And Recession Following Non-Surgical Periodontal Treatment Using 3-Dimensional Scan Methods.

The study evaluated the position of gingival margins in anterior teeth using clinical and 3-dimensional (3D) optical scanning method among patients subjected to non surgical periodontal treatment (NSPT). A single arm, longitudinal study was undertaken at the Archway Dental Center, University of Manchester, UK. History and clinical examination were done. Gingival recession, attachment loss (AL), and periodontal probing depth (PD) were recorded at baseline and 12-weeks follow-up. NSPT was done using hand and ultrasonic instruments. Impressions were made, the resultant gypsum models were scanned to generate 3D images. The change in the gingival level and thickness of facial gingiva were assessed. Out of eight patientsrecruited, three were lost to follow up. The 3D scan showed a poor correlation with the clinical assessment of gingival recession in anterior teeth following NSPT (r=- 0.0089). Recession did not improve after NSPT (p= 0.20).

[Clinical and radiographic effect of simultaneously labial and lingual augmented corticotomy: a prospective case series study].

Objective: To investigate soft-and hard-tissue changes after simultaneously labial and lingual augmented corticotomy in patients with insufficient alveolar bone thickness of lower anterior teeth both in labial and lingual side during orthodontic treatment. Methods: From January 2021 to June 2022, 10 patients [2 males and 8 females, (26.2±3.1) years old] who received orthodontic and orthognathic combined treatment from the Fourth Clinical Division, Peking University School and Hospital of Stomatology were selected. The alveolar bone thickness of lower anterior teeth both in labial and lingual side in these patients was less than 0.5 mm according to cone-beam CT examination before or during treatment, and 60 lower anterior teeth were included. The 10 patients were treated with simultaneously labial and lingual augmented corticotomy. The differences in gingival recession, papilla index and the differences in labial and lingual alveolar bone thickness of lower anterior teeth were compared. Results: Six months after surgery, the alveolar bone thicknesses at the 4 mm under cemento-enamel junction (CEJ), 8 mm under CEJ and at the apical level [labial side: (1.02±0.39), (2.22±0.89) and (4.87±1.35) mm; lingual side: (1.07±0.46), (2.31±1.04) and (3.91±1.29) mm] were significantly higher than that before surgery [labial side: (0.02±0.09), (0.06±0.21) and (2.71±1.33) mm]; lingual side: (0.14±0.29), (0.40±0.52) and (2.13±1.02) mm] (P<0.001), respectively. The increases in alveolar bone thickness of central incisors [apical level on labial side: (2.53±1.20) mm, 8 mm under CEJ on lingual side: (2.27±1.24) mm, apical level on lingual side: (2.66±1.49) mm] and lateral incisors [apical level on labial side: (2.42±1.30) mm, 8 mm under CEJ on lingual side: (2.28±0.92) mm, apical level on lingual side: (1.94±1.15) mm] were significantly higher than that of canines [apical level on labial side: (1.52±1.47) mm, 8 mm under CEJ on lingual side: (1.17±1.09) mm,apical level on lingual side: (0.74±1.37) mm] (P<0.01). There were no significant differences in the degree of gingival recession [labial side before surgery: (0.72±0.88) mm, lingual side before surgery: (0.80±1.09) mm; labial side 6 months after surgery: (0.72±0.81) mm,lingual side 6 months after surgery: (0.89±0.21) mm] and gingival papilla index [before surgery: 1.00(0.75, 2.00); 6 months after surgery: 1.00(1.00, 2.00) ] between pre-operation and 6 months after surgery (P>0.05). No serious complications occurred. Conclusions: The method used in this article for simultaneously labial and lingual augmented corticotomy was safe and feasible. This surgery has positive clinical significance for the stability of the periodontal tissue in orthodontic treatment for patients with alveolar bone thickness less than 0.5 mm of lower anterior teeth both in labial and lingual side.

An evaluation of gingival phenotype and thickness as determined by indirect and direct methods.

OBJECTIVES: To evaluate gingival phenotype (GP) and thickness (GT) using visual, probing, and ultrasound (US) methods and to assess the accuracy and consistency of clinicians to visually identify GP. MATERIALS AND METHODS: The GP and GT of maxillary and mandibular anterior teeth in 29 orthodontic patients (mean age 25 ± 7.5 years) were assessed using probing and US by a single examiner. General dentist and dental specialist assessors (n = 104) were shown intraoral photographs of the patients, including six repeated images, and asked to identify the GP via a questionnaire. RESULTS: An increasing trend in GT values of thin, medium, and thick biotype probe categories was found, though this was not statistically significant (P = .188). Comparison of probing method to determinations of GT made by US yielded slight agreement (κ = 0.12). Using the visual method, assessors' identification of the second GP determination ranged from poor to moderate agreement (κ = 0.29 to κ = 0.53). CONCLUSIONS: The probe method is sufficient in differentiating between different categories of GP. However, further research is required to assess the sensitivity of the probe method in recognizing phenotypes in the most marginal of cases. Assessors using the visual method lack the ability to identify GP accurately and consistently among themselves.