Comparison of various chitosan-based in situ forming gels with sodium fluoride varnish for enamel biomineralization: an in-vitro pH cycling model.

This study aimed to evaluate chitosan (CS)-based formulations loaded with 5% sodium fluoride (NaF) and/or 10% nanohydroxyapatite (nHA) to remineralize the demineralized primary tooth enamel surface. Ninety enamel blocks were demineralized and were divided into six groups (n = 15): (1) CS-based hydrogel, (2) CS-based hydrogel loaded with NaF, (3) CS-based hydrogel loaded with nHA, (4) CS-based hydrogel loaded with NaF and nHA, (5) 5% NaF varnish, and (6) negative control with no intervention. After intervention, the specimens were pH cycled by 2 h immersion in demineralizing solution and 22 h immersion in remineralizing solution for 8 days. The remineralization effects were evaluated by Vickers microhardness measurements and field emission scanning electron microscopy coupled with energy-dispersive X-ray spectrometry (FESEM-EDS). The best mean ± SD percentage microhardness recovery in remineralized enamel (%REMH) was found in group 4 (56.90 ± 5.49). The %REMH of groups 2 (30.74 ± 3.51) and 5 (29.23 ± 5.65) were statistically the same (p = 0.943). FESEM images confirmed partial coverage of the porous demineralized enamel with a newly formed mineralized layer. Based on EDS findings, the Ca/P ratio values of the treated enamel surfaces with CS-based hydrogels ranged between 1.71 and 1.87, and the highest F content was noticed in group 2 (1.02 ± 0.03). Although, all tested CS-based hydrogels demonstrated the potential to repair demineralized enamel, nHA- and NaF-containing CS-based hydrogel showed the highest remineralization effect. We infer that this new hybrid hydrogel is a potentially useful dental material for tooth biomineralization.

Role of the novel aloe vera-based titanium dioxide bleaching gel on the strength and mineral content of the human tooth enamel with respect to age.

There has been an increased demand for dental bleaching globally irrespective of age and gender. Main drawbacks associated with conventional tooth bleaching agents have been compromised strength and mineral-content of tooth enamel which results in sensitivity, discomfort, roughness, and structure loss of human teeth. Currently, nanoparticles synthesized by green synthesis have gained popularity especially in medical and dental applications because of their versatile and beneficial nano-scaled features. Titanium dioxide nanoparticles (TiO2Nps) in this study were prepared from green ecofriendly source using the aloe vera plant extract and were then characterized via dynamic light scattering (DLS), scanning electron microscope (SEM), X-ray diffraction spectroscopy (XRD), and energy dispersive X-ray (EDX), for size, shape, composition and true-phase. These TiO2 Nps were incorporated in commercial bleaching gel containing hydrogen peroxide to form a novel TiO2-bleaching gel which was used to bleach extracted anterior teeth belonging to four different age groups: 20-29 years, 30-39 years, 40-49 years and ≥50 years. These teeth were investigated for micro-hardness (Vickers microhardness tester) and mineral-content (EDX spectroscopy) including sodium, magnesium, phosphorus, calcium in an in-vitro environment both before and after bleaching. Results revealed that TiO2 Nps prepared by aloe vera plant were nanos-sized of about 37.91-49 nm, spherical shape, true anatase phase with pure titanium and oxygen in their composition. The values of Vickers micro-hardness and mineral-content (Na, Mg, P, Ca) of enamel specimens belonging to different age groups enhanced in a linear pattern before bleaching with the increase in age (p value < 0.05). There was negligible reduction observed in Vickers micro-hardness and mineral-content elements (Na, Mg, P, Ca) of all enamel specimens belonging to different ages after the bleaching (p value > 0.05). The novel TiO2-bleaching gel prepared was effective enough in preventing the declination in Vickers micro-hardness strength and mineral-content of all the enamel specimens belonging to different age groups even after the bleaching procedure which makes it a promising biomaterial.

A pilot study on post-mortem determination of drug abuse on dental tissues.

BACKGROUND: Post-mortem toxicology constantly deals with the research of reliable alternative matrices to be applied in case of highly damaged corpses (such us carbonized, skeletonized, human remains, etc.). Teeth represent a promising alternative matrix since dental tissues are endowed by different features, resistance and stability after death. SCOPE: Since scant literature reported on the pharmacokinetics and mechanism of incorporation of xenobiotics into dental tissues, this pilot research aims to investigate whether in the pulp can be detected the same substances found in blood in drug related death cases. Secondly, the study is addressed to disclose the possible deposit of drugs in dental hard tissues (dentine and/or enamel), thus contributing to reconstruct the drug abuse history (timing, e.g.). MATERIALS AND METHODS: The study experimented with a novel method to separately analyse dental enamel, dentin, and pulp, applied to 10 teeth collected during autopsies of drug-related deaths along with blood and hair samples for classic toxicological analyses. Each tooth was prepared by "pulverization technique" and then analysed by gas chromatography paired with mass spectrometry (GC-MS) and ultra high performance liquid chromatography coupled to high resolution mass spectrometry (UHPLC/HR-MS) for searching cocaine, opiates, and metabolites. The results were then compared with those obtained from blood and hair samples. RESULTS: Preliminary results demonstrated that teeth differ from any other classic matrix (blood and hairs) since the qualitative correspondence of the detected substances between pulp and blood as well as dental hard tissues and hair suggests that they can be useful in post-mortem evaluation as a unique matrix for both acute and chronic assumptions of drugs. The mechanism of accumulation of substances in mineralized dental tissues emerged the most significant result, being influenced by the type of molecule and the method of assumption. The main limitation of this study is the limited availability of the sample and the absence of anamnestic information of the time, rates and method of drug assumption during life. Further research is necessary to systematically investigate the distribution of different substances within the different tissues of the tooth.

Mid-infrared passive spectroscopic imaging for visualizing tooth quality.

Although the measurement of tooth quality is necessary for precise prediction of caries formation, typical measurement methods include tooth-hardness measurements and absorption spectroscopy, which generally use infrared light irradiation. These methods are destructive or invasive, and obtaining two-dimensional information in the oral cavity is difficult. Mid-infrared emissions from the surface of an object reflect intrinsic vibrations of molecules in the object. In this study, a mid-infrared passive spectroscopic imaging system was developed using an inexpensive uncooled microbolometer array sensor with an optimized multi-slit, which eliminated the cancellation of interference intensities between two adjacent emission points, to obtain two-dimensional information from an object without external infrared light irradiation. First, the feasibility of obtaining two-dimensional information on tooth quality using the proposed system was examined, and emission spectra attributed to phosphate ions in hydroxyapatite (HAp), the main component of enamel, were successfully obtained from bovine teeth. Further, the hardness of bovine teeth was measured, and a correlation (R2 = 0.8067) between the Vickers hardness and peak area ratio of phosphate ions assigned to the crystalline and amorphous phases of a tooth was established. Additionally, tooth-hardness visualization in a non-contact manner was demonstrated as two-dimensional information using the obtained regression equation.

Effect of time and photoactivated face on bond strength of brackets and on degree of monomer conversion.

OBJECTIVE: To evaluate the effect of four different photoactivation protocols (according to "photoactivated faces" - mesial/distal, cervical/incisal or center - and "photoactivation time" - 6-3 s) of a high-power photo activator (Valo Cordless®-Ultradent) on the shear bond strength (SBS) between metal brackets and dental enamel and on the degree of conversion (DC) of an orthodontic resin. MATERIALS AND METHODS: 40 bovine incisor crowns were randomly assigned to 4 groups (n = 10). The brackets were bonded with Transbond XT® resin using 4 protocols according to the "photoactivation protocol" factor (which was subdivided into photoactivated faces and photoactivation time): V3C = 3 s + center; V6C = 6 s + center; V3M3D = 3 s on mesial + 3 s on distal; V3C3I = 3 s on cervical + 3 s on incisal. All the samples were stored for 4 months (water,37ºC) and then subjected to a SBS test (100KgF,1 mm/min). 40 resin discs were made to evaluate the monomer degree of conversion. Data from the SBS and DC were assessed by One-way ANOVA and Tukey's test (5%). Bond failures were analyzed according to the Adhesive Remnant Index (ARI) and evaluated by the Kruskal-Wallis test (5%). RESULTS: There was a statistically significant difference (p = 0.008) in the One-way ANOVA result for SBS values between all groups, but the protocols showed statistically similar results (p ≥ 0.05-Tukey's tests) concerning the photoactivated faces (V6C, V3M3D and V3C3I) and photoactivation time (V3C and V6C) factors individually. There was no statistically significant difference (p ≥ 0.05) in the One-way ANOVA result for DC values. CONCLUSION: The SBS and DC values will vary depending on the protocol applied. CLINICAL RELEVANCE: It is possible to maintain the bracket fixation quality with the use of a high-power LED photo activator associated with a shorter photoactivation time. However, it is assumed that not all types of protocols that might be applied will provide quality bonding, such as V3C, V3M3D and V3C3I, which may - depending on the SBS and DC values - affect the final treatment time, due to brackets debonding, or increase of possibility of damage to dental enamel during bracket removal. Clinical studies are suggested to confirm the hypotheses of this research.

Influence of coffee characteristics on tooth discoloration.

PURPOSE: To evaluate the impact of coffee attributes on tooth discoloration, emphasizing the importance of potential factors such as serving temperature, bean variety, and chlorogenic acid (CGA) content. METHODS: Coffee preparation involved the extraction of espresso from four types of roasted beans (Vietnam Robusta, Uganda Robusta, Ethiopia Yirgacheffe Arabica, and Colombia Supremo Arabica), followed by chlorogenic content analysis using high-performance liquid chromatography. Bovine tooth enamel specimens were carefully prepared and stained with coffee (hot and iced), with a color assessment conducted at different time intervals (3, 9, 24, 48, and 72 hours). The Vickers hardness tester was employed to ensure specimen quality, while spectrophotometry aided in color analysis using the CIEDE2000 formula. RESULTS: The results revealed varying effects of serving temperature, bean type, and CGA content on tooth discoloration. It was demonstrated that perceptible color differences occur after a 3-hour immersion in coffee, with hot coffee showing higher staining potential compared to iced variations. Furthermore, chlorogenic acid content and bean type significantly affected tooth discoloration, with higher chlorogenic acid levels associated with increased staining. Notably, Robusta coffee showed less discoloration compared to Arabica, potentially due to differences in pH levels. CLINICAL SIGNIFICANCE: The findings provide valuable insights for both dental practitioners and coffee consumers, assisting in making informed decisions regarding coffee intake and oral hygiene.

Evaluating the Effects of Cigarette Smoking and Heated Tobacco Products on Hard Dental Tissues: A Comparative Histological and Colorimetric Analysis.

OBJECTIVES: This study aimed to evaluate and compare the impact of cigarette smoking (CS) and heated tobacco (HT) on the alteration of color and ultrastructural characteristics of human enamel and cementum. BACKGROUND: According to tobacco companies, a less harmful substitute for CS is HT products. Nevertheless, comprehensive research on the effects of HT on tooth structures has been lacking. This study aimed to evaluate and compare the impact of CS and HT on the alteration of color and ultrastructural characteristics of human enamel and cementum. MATERIALS AND METHODS: Thirty intact and noncarious human maxillary premolars extracted for orthodontic treatment purposes, previously disinfected, were used in the study. The specimens were randomly separated into six groups (n = 10), as follows: Group 1: enamel without smoking exposure; Group 2: enamel exposed to CS; Group 3: enamel exposed to HT; Group 4: cementum without smoking exposure; Group 5: cementum exposed to CS; and Group 6: cementum exposed to HT. The measurement of color change was conducted using a spectrophotometer. The surface alterations and mineral composition of enamel and cementum were evaluated using scanning electron microscopy and energy-dispersive X-ray spectroscopy. ANOVA test followed by Tukey's post hoc test was used to determine significant differences between groups. RESULTS: Results showed that CS had a more pronounced effect on enamel and cementum color changes than HT. The impact of CS and HT on color changes was more evident in cementum than in enamel. Surface morphology of enamel and cementum showed alterations in histology following exposure to both smoking types. Moreover, the mineral content experienced a significant reduction after using CS and HT. The reduction in calcium content after CS and HT exposure was similar. However, HT led to a significant decrease in the phosphorus content of enamel when compared with CS. At the same time, CS exposure in cementum resulted in a more significant reduction in Ca/P ratio than HT. CONCLUSIONS: Although HT may appear to present a lower danger to hard dental tissues than CS, it is not entirely harmless. CS results in more color changes on the enamel and cementum of teeth. Both smoking methods affected the mineral content of teeth, with CS having a significant effect on the roots, while HT significantly affected the crowns' mineral composition.

Caries-Prone Primary Teeth: A Hidden Reason and Prophylactic Treatment in the Viewpoint of Materials Science.

Dental caries, the most prevalent chronic disease across all age groups, has a high prevalence, particularly among children. However, there is no specific and effective treatment for the prevention of caries in primary teeth (Pr.T.), which stems from a lack of knowledge regarding the basic nature of the tooth surface. Herein, we observed that the adhesion energies of the caries-related bacteria Streptococcus mutans and Streptococcus sanguinis to Pr.T were approximately 10 and 5.5 times higher than those to permanent teeth (Pe.T). A lower degree of mineralization and more hydrophilic characteristics of the Pr.T enamel account for this discrepancy. Accordingly, we proposed that the on-target modification of both hydroxyapatite and organic components on Pr.T by dual modification would render a sufficient hydration layer. This resulted in an approximately 11-time decrease in bacterial adhesion energy after treatment. In contrast, a single hydroxyapatite modification on Pe.T and young permanent teeth (Y.Pe.T) was sufficient to achieve a similar effect. Theoretical simulation further verified the rationality of the approach. Our findings may help understand the reason for Pr.T being caries-prone and provide references for treatment using resin restorations. This strategy offers valuable insights into daily oral hygiene and dental prophylactic treatment in children.

Infrared spectral library of tooth enamel from African ungulates for accurate electron spin resonance dating.

Electron spin resonance coupled with uranium-series dating (ESR/U-series) of carbonate hydroxyapatite in tooth enamel is the main technique used to obtain age determinations from Pleistocene fossils beyond the range of radiocarbon dating. This chronological information allows to better understand diachronic change in the palaeontological record, especially with regard to the evolution of the genus Homo. Given the relative paucity of human teeth at palaeontological and archaeological localities, ESR/U-series is widely applied to the teeth of ungulate species. However, the accuracy of ESR/U-series ages is greatly affected by the incorporation of uranium in the enamel during burial in sediments. It has been shown that uranium content is positively correlated with an increased degree of atomic order in carbonate hydroxyapatite crystals, the latter determined using infrared spectroscopy. Here we present a reference infrared spectral library of tooth enamel from African ungulates, based on the grinding curve method, which serves as baseline to track the diagenetic history of carbonate hydroxyapatite in different species and thus select the best-preserved specimens for dating.

Influence of Different Application Modes of a Universal Adhesive System on the Bond Strength of Bulk-Fill Composite Resin to Enamel and Dentin in Primary Teeth.

OBJECTIVES: The objective of this study was to assess how the application mode of a universal adhesive system affects the microshear bond strength (µSBS) of bulk-fill and conventional composite resins to enamel and dentin in primary teeth. METHODS: A total of 80 caries-free primary second molars were randomly assigned to eight experimental groups (n = 10) based on the bonding substrate (enamel or dentin), the application mode of the universal adhesive system (etch and rinse [E&R], or self-etch [SE]), and the type of composite resin used (bulk-fill or conventional). After bonding the composite resin to enamel or dentin, the µSBS of the bonded composite resins was measured. RESULTS: The mean µSBS value of bulk-fill composite resin was significantly higher than that of conventional composite resin for both enamel and dentin substrates, regardless of the application mode (p < 0.001). An interaction effect between the bonding substrate and the application mode of the adhesive system was observed, indicating a significant relationship (p < 0.001). The highest µSBS values for primary teeth enamel were achieved using the E&R mode with bulk-fill composite resin, while for dentin specimens, the SE mode with bulk-fill composite resin yielded the highest µSBS values. The µSBS of the E&R group was significantly higher than that of the SE group for enamel specimens (p < 0.001), whereas the µSBS of the SE group was significantly higher than that of the E&R group for dentin specimens (p < 0.001). CONCLUSION: Bulk-fill composite resin demonstrated higher µSBS in comparison to conventional composite resin. The universal adhesive system exhibited superior performance in the SE mode compared to the E&R mode on primary dentin. Pre-etching the enamel before the application of the universal adhesive enhanced the µSBS to primary teeth enamel, highlighting the importance of selectively acid etching the enamel of primary teeth.

A label-free quantification method for assessing sex from modern and ancient bovine tooth enamel.

Identification of the sex of modern, fossil and archaeological animal remains offers many insights into their demography, mortality profiles and domestication pathways. However, due to many-factors, sex determination of osteological remains is often problematic. To overcome this, we have developed an innovative protocol to determine an animal's sex from tooth enamel, by applying label-free quantification (LFQ) of two unique AmelY peptides 'LRYPYP' (AmelY;[M+2] 2 + 404.7212 m/z) and 'LRYPYPSY' (AmelY;[M+2] 2 + 529.7689 m/z) that are only present in the enamel of males. We applied this method to eight modern cattle (Bos taurus) of known sex, and correctly assigned them to sex. We then applied the same protocol to twelve archaeological Bos teeth from the Neolithic site of Beisamoun, Israel (8-th-7-th millennium BC) and determined the sex of the archaeological samples. Since teeth are usually better preserved than bones, this innovative protocol has potential to facilitate sex determination in ancient and modern bovine remains that currently cannot be sexed.

Unraveling the orientation-dependent mechanics of dental enamel in the red-necked wallaby.

Dental enamels of different species exhibit a wide variety of microstructural patterns that are attractive to mimic in bioinspired composites to simultaneously achieve high stiffness and superior toughness. Non-human enamel types, however, have not yet received the deserved attention and their mechanical behaviour is largely unknown. Using nanoindentation tests and finite element modelling, we investigate the mechanical behaviour of Macropus rufogriseus enamel, revealing a dominating influence of the microstructure on the effective mechanical behaviour and allowing insight into structural dependencies. We find a shallow gradient in stiffness and low degree of anisotropy over the enamel thickness that is attributed to the orientation and size of microstructural features. Most notably, M. rufogriseus's modified radial enamel has a far simpler structural pattern than other species', but achieves great property amplification. It is therefore a very promising template for biomimetic design. STATEMENT OF SIGNIFICANCE: The diversity of dental enamel structures in different species is well documented, but the mechanical behaviour of non-human enamel types is largely unknown. In this work, we investigate the microstructure and structure-dependent mechanical properties of marsupial enamel by nanoindentation and finite element simulations. Combining these methods gives valuable insights into the performance of modified radial enamel structures. Their stiffness and toughness stems from a unique structural design that is far less complex than well-studied human enamel types, which makes it a uniquely suitable template for biomimetic design.

EFFECTS OF ACID ETCHING ON COLOR CHANGES AND SURFACE MORPHOLOGY OF ENAMEL TO BE BLEACHED WITH DIFFERENT TECHNIQUES.

Aims - to compare the color changes, the surface roughness and morphology of the enamel bleached with two different bleaching solutions (chemical and laser activated), preceded or not with acid etching. Thirty teeth of bovine prepared and haphazardly assigned to 2 groups (n=15) depending on bleaching technique. Each group subdivided to 3 subgroup (n=5) consistent with acid etching by 37% phosphoric acid. Atomic force microscopy and VITA easy shade spectrophotometer were performed twice for all the specimens before and after bleaching. ANOVA, the Paired sample t-test, and the independent sample t-test used for statistical analysis. As for the color changes, the groups that were bleached by the chemical method, the difference among the three subgroups was statistically significant. This also applies to the groups bleached with the laser method. When comparing the results of the chemical bleaching subgroups with the laser bleaching ones, the difference was not significant. Roughness results showed significant differences between certain subgroups and non-significant differences among others. However, the difference was statistically significant between the chemical and laser groups, laser technique resulted in less surface roughness than the chemical one. Acid etching before bleaching produced better colour change in both the chemical and laser assisted bleaching. In chemical bleaching, surface roughness was higher when acid etching was used. This was also true for laser bleaching technique. In general, laser assisted bleaching produced less surface roughness than chemical bleaching.

Combined uranium-series and electron spin resonance dating from the Pliocene fossil sites of Aves and Milo's palaeocaves, Bolt's Farm, Cradle of Humankind, South Africa.

Bolt's Farm is the name given to a series of non-hominin bearing fossil sites that have often been suggested to be some of the oldest Pliocene sites in the Cradle of Humankind, South Africa. This article reports the results of the first combined Uranium-Series and Electron Spin Resonance (US-ESR) dating of bovid teeth at Milo's Cave and Aves Cave at Bolt's Farm. Both tooth enamel fragments and tooth enamel powder ages were presented for comparison. US-ESR, EU and LU models are calculated. Overall, the powder ages are consistent with previous uranium-lead and palaeomagnetic age estimates for the Aves Cave deposit, which suggest an age between ~3.15 and 2.61 Ma and provide the first ages for Milo's Cave dates to between ~3.1 and 2.7 Ma. The final ages were not overly dependent on the models used (US-ESR, LU or EU), which all overlap within error. These ages are all consistent with the biochronological age estimate (<3.4->2.6 Ma) based on the occurrence of Stage I Metridiochoerus andrewsi. Preliminary palaeomagnetic analysis from Milo's Cave indicates a reversal takes place at the site with predominantly intermediate directions, suggesting the deposit may date to the period between ~3.03 and 3.11 Ma within error of the ESR ages. This further suggests that there are no definitive examples of palaeocave deposits at Bolt's Farm older than 3.2 Ma. This research indicates that US-ESR dating has the potential to date fossil sites in the Cradle of Humankind to over 3 Ma. However, bulk sample analysis for US-ESR dating is recommended for sites over 3 Ma.

Increasing control over biomineralization in conodont evolution.

Vertebrates use the phosphate mineral apatite in their skeletons, which allowed them to develop tissues such as enamel, characterized by an outstanding combination of hardness and elasticity. It has been hypothesized that the evolution of the earliest vertebrate skeletal tissues, found in the teeth of the extinct group of conodonts, was driven by adaptation to dental function. We test this hypothesis quantitatively and demonstrate that the crystallographic order increased throughout the early evolution of conodont teeth in parallel with morphological adaptation to food processing. With the c-axes of apatite crystals oriented perpendicular to the functional feeding surfaces, the strongest resistance to uniaxial compressional stress is conferred along the long axes of denticles. Our results support increasing control over biomineralization in the first skeletonized vertebrates and allow us to test models of functional morphology and material properties across conodont dental diversity.

North and South in Medieval Iberia: A historical and environmental estimate through isotopic analyses.

The Middle Ages in the Iberian Peninsula is a period of special interest for studying the relationship of climate change with historical and socioeconomic processes. Between the 8th and 15th centuries AD, the Peninsula was characterized not only by complex political, cultural, and social transitions but also by major variations in the climate. The objective of this study was to examine differences in diet and mobility between distinct populations of the Peninsula and explore the possible relationship of diet, mobility, and culture with environmental variables and geographical settings. For this purpose, we obtained stable isotopic ratios of carbon and oxygen (δ13C and δ18O) from the enamel apatite of first upper incisors from 145 individuals at eight archeological sites that represent both Christian and Islamic communities and both rural and urban social settings. Results revealed a dietary difference between Christian and Islamic populations, observing a greater contribution of C4 plants, possibly sorghum, in the diet of the latter, especially in a rural setting. The disparity in oxygen isotopic ratios between populations from the North and South of the Peninsula is consistent with modern climatic differences between these regions. In this line, intraregional variability in oxygen isotopic ratios may hint at diachronic occupation phases under varying climatic conditions. The few isotopic outliers in our sample suggest overall low mobility levels.

The Synergistic Effect of High Intensity Focused Ultrasound on In-vitro Remineralization of Tooth Enamel by Calcium Phosphate Ion Clusters.

Background: Remineralization of dental enamel is an important intervention strategy for the treatment of demineralized lesions. Existing approaches have limitations such as failure to adequately reproduce both the ideal structural and mechanical properties of the native tooth. The ability of ultrasound to control and accelerate the crystallization processes has been widely reported. Therefore, a new approach was explored for in-vitro enamel remineralization involving the synergistic effect of high-intensity focused ultrasound (HIFU) coupled with calcium phosphate ion clusters (CPICs). Methods: The demineralized enamel was treated with CPICs, with or without subsequent HIFU exposure for different periods (2.5, 5, and 10 min). The specimens were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and Raman spectroscopy. The surface hardness and crystallographic properties of the treated specimens were evaluated using Vickers microhardness testing and X-ray diffraction (XRD), respectively. Results: SEM revealed distinct, organized, and well-defined prismatic structures, showing clear evidence of remineralization in the combined CPIC/HIFU treatment groups. AFM further revealed a decrease in the surface roughness values with increasing HIFU exposure time up to 5 min, reflecting the obliteration of interprismatic spaces created during demineralization. The characteristic Raman band at 960 cm-1 associated with the inorganic phase of enamel dominated well in the HIFU-treated specimens. Importantly, microhardness testing further demonstrated that new mineral growth also recovered the mechanical properties of the enamel in the HIFU-exposed groups. Critical to our aspirations for developing this into a clinical process, these results were achieved in only 5 min. Conclusion: HIFU exposure can synergise and significantly accelerate in-vitro enamel remineralization process via calcium phosphate ion clusters. Therefore, this synergistic approach has the potential for use in future clinical interventions.

Experimental Bracket Design Performance on Bonding and Polymerization of Orthodontic Composite.

Objective: To evaluate the enamel bonding ability and orthodontic adhesive resin degree of conversion using the experimental bracket design. Material and Methods. Thirteen bovine teeth were used in the study. The experimental bracket was modified with a translucent region in the center of its body. After enamel etching, Orthocem orthodontic adhesive (FGM, Joinville, Brazil) was applied on the bracket base for bonding. The groups were divided as follows (n = 10 per group): (1) control (CB) with standard brackets and (2) spot bracket (SB) with experimental brackets featuring a 0.8 mm translucent region at the center using carbide bur. Shear bond strength (SBS) was evaluated after 24 hours in a universal testing machine and adhesive remnant index (ARI). The degree of conversion (DC) was analyzed using Raman spectroscopy (n = 3 per group). Data were then analyzed using Student's t-test and Mann-Whitney statistical methods. Results: The SB group exhibited a higher mean SBS (10.33 MPa) compared to the CB Group (8.77 MPa). However, there was no statistical difference between the groups (p = 0.376). Both SB and CB groups had a mean ARI score of 1. Raman analysis revealed a higher degree of conversion in the SB group (49.3%) compared to the CB group (25.9%). Conclusions: The experimental support showed a higher degree of adhesive conversion, although there was no significant increase in bond strength.

Self-assembled branched polypeptides as amelogenin mimics for enamel repair.

The regeneration of demineralized enamel holds great significance in the treatment of dental caries. Amelogenin (Ame), an essential protein for mediating natural enamel growth, is no longer secreted after enamel has fully matured in childhood. Although biomimetic mineralization based on peptides or proteins has made significant progress, easily accessible, low-cost, biocompatible and highly effective Ame mimics are still lacking. Herein, we construct a series of amphiphilic branched polypeptides (CAMPs) by facile coupling of the Ame's C-terminal segment and poly(γ-benzyl-L-glutamate), which serves to simulate the Ame's hydrophobic N-terminal segment. Among them, CAMP15 is the best biomimetic mineralization template with great self-assembly performance to guide the oriented crystallization of hydroxyapatite and is capable of inhibiting the adhesion of Streptococcus mutans and Staphylococcus aureus on the enamel surfaces. This work highlights the potential application of amphiphilic branched polypeptide as Ame mimics in repairing defected enamel, providing a promising strategy for prevention and treatment of dental caries.

Comparison of biofilm models for producing artificial active white spot lesions.

OBJECTIVE: This study compared three protocols for developing artificial white spot lesions (WSL) using biofilm models. METHODOLOGY: In total, 45 human enamel specimens were sterilized and allocated into three groups based on the biofilm model: Streptococcus sobrinus and Lactobacillus casei (Ss+Lc), Streptococcus sobrinus (Ss), or Streptococcus mutans (Sm). Specimens were incubated in filter-sterilized human saliva to form the acquired pellicle and then subjected to the biofilm challenge consisting of three days of incubation with bacteria (for demineralization) and one day of remineralization, which was performed once for Ss+Lc (four days total), four times for Ss (16 days total), and three times for Sm (12 days total). After WSL creation, the lesion fluorescence, depth, and chemical composition were assessed using Quantitative Light-induced Fluorescence (QLF), Polarized Light Microscopy (PLM), and Raman Spectroscopy, respectively. Statistical analysis consisted of two-way ANOVA followed by Tukey's post hoc test (α=0.05). WSL created using the Ss+Lc protocol presented statistically significant higher fluorescence loss (ΔF) and integrated fluorescence (ΔQ) in comparison to the other two protocols (p<0.001). RESULTS: In addition, Ss+Lc resulted in significantly deeper WSL (137.5 µm), followed by Ss (84.1 µm) and Sm (54.9 µm) (p<0.001). While high mineral content was observed in sound enamel surrounding the WSL, lesions created with the Ss+Lc protocol showed the highest demineralization level and changes in the mineral content among the three protocols. CONCLUSION: The biofilm model using S. sobrinus and L. casei for four days was the most appropriate and simplified protocol for developing artificial active WSL with lower fluorescence, higher demineralization, and greater depth.