Recent advances in analysis of bisphenols and their derivatives in biological matrices.

Biomonitoring is a very useful tool to evaluate human exposure to endocrine-disrupting compounds (EDCs), like bisphenols (BPs), which are widely used in the manufacture of plastics. The development of reliable analytical methods is key in the field of public health surveillance to obtain biomonitoring data to determine what BPs are reaching people's bodies. This review discusses recent methods for the quantitative measurement of bisphenols and their derivatives in biological samples like urine, blood, breast milk, saliva, and hair, among others. We also discuss the different procedures commonly used for sample treatment, which includes extraction and clean-up, and instrumental techniques currently used to determine these compounds. Sample preparation techniques continue to play an important role in the analysis of complex matrices, for liquid matrices the most commonly employed is solid-phase extraction, although microextraction techniques are gaining importance in this field, and for solid samples ultrasound-assisted extraction. The main instrumental techniques used are liquid and gas chromatography coupled with mass spectrometry. Finally, we present data on the main parameters obtained in the validation of the revised methods. This review focuses on various methods developed and applied for trace analysis of bisphenols, their conjugates, halogenated derivatives, and diglycidyl ethers in biological samples to enable the required selectivity and sensitivity. For this purpose, a review is carried out of the most recent relevant publications from 2016 up to present.

Experimental design of switchable solvent-based liquid phase microextraction for the accurate determination of etrimfos from water and food samples at trace levels by GC-MS.

Presented in this study is a simple but efficient switchable polarity solvent microextraction strategy for etrimfos preconcentration from water and food samples for quantification by gas chromatography mass spectrometry. Repeatability of the extraction process and instrumental measurements were enhanced by using deuterated bisphenol A as internal standard. Significant parameters of the extraction method were fitted into an experimental design model to study the effects of parameters on extraction output, as well as mutual effects of combined parameters. The design model was formed with 51 experimented data obtained from the combination of sodium hydroxide volume, switchable solvent volume, and vortex period at three levels. The method was validated by applying optimum conditions attained from the model predictor. The detection limit was found to be 1.3 ng/mL and it corresponded to an enhancement factor of about 54 folds when compared to direct GC-MS measurement. Etrimfos was not detected in the water and food samples tested but the results (92-107%) obtained from spiked recovery experiments established that etrimfos when present in the selected matrices can be accurately and precisely quantified.

Quantitative analysis of phenolic metabolites in Copaifera langsdorffii leaves from plants of different geographic origins cultivated under the same environmental conditions.

INTRODUCTION: Galloylquinic acid derivatives and flavonoids are the main phenolic metabolites found in Copaifera langsdorffii leaves (Leguminosae, Detarioideae), a medicinal plant with potential therapeutic application in the treatment of kidney stones. The factors that affect metabolite production in this plant species are not well understood but may include environmental and genetic factors. OBJECTIVE: To quantify the variation in metabolite production over a 12-month period for 10 groups of C. langsdorffii cultivated under the same environmental conditions. METHODS: Copaifera langsdorffii seeds were collected from 10 different regions in southeast, Brazil and grown in the same field. HPLC-UV was used to quantify nine galloylquinic acid derivatives and two flavonoids in leaf samples from mature trees. Climate data for humidity, radiation, precipitation and temperature were provided by the National Institute of Meteorology, Brazil. Multivariate analyses were performed to correlate chemical and environmental variables. RESULTS: The overall effect of environmental factors on the production of phenolic metabolites was uniform among C. langsdorffii groups. Chemical variation between groups was present, but small, and probably due to differences in their genetics and physiology. Seasonal changes influenced the production of the major phenolic metabolites, with increases in temperature and radiation levels favouring metabolite production. CONCLUSION: When C. langsdorffii trees are cultivated in the same environment, the production of the major secondary metabolites found in their leaves is very similar quantitatively, varying based on geographic location of original population and seasonal changes. This favours the standardisation of plant raw material for the production of a phytomedicine.

An updated weight of evidence approach for deriving a health-based guidance value for 4-nonylphenol.

4-Nonylphenol (NP) is a persistent estrogen-active compound. Human exposure to NP is primarily through water and food. Although risk assessments of NP have been conducted by the European Union and a few other countries, only the Danish Veterinary and Food Administration, in 2000, proposed a tolerable daily intake of 0.005 mg kg-1 body weight (bw) day-1 . New data have been accumulated since then, prompting an update on the risk assessment of NP. A weight of evidence approach is recommended for use in scientific assessments by several agencies, e.g., European Food Safety Authority, etc. Based on the results of a weight of evidence approach, two methods were used to derive the health-based guidance value (HBGV) for NP in this study, namely a no observed adverse effects level/lowest observable adverse effect level method, and a benchmark dose method. Considering the considerable uncertainty of benchmark dose model fitting of the available data, a tolerable daily intake value of 0.025 mg kg-1 bw day-1 was derived as a provisional HBGV for NP based on the lowest observable adverse effect level value of 15 mg kg-1 bw day-1 of the renal toxicity in rats, together with the uncertainty factor of 600. However, the HBGV of NP still needs further investigation.

Inhibitory Effect of Standardized Curcuma xanthorrhiza Supercritical Extract on LPS-Induced Periodontitis in Rats.

Periodontitis, which is a severe inflammatory disease caused by endotoxins secreted from oral pathogens, destructs gingival tissue and alveolar bone. Curcuma xanthorrhiza, commonly called Java turmeric, has been shown to possess anti-bacterial and anti-inflammatory activities. The present study evaluated the inhibitory effect of C. xanthorrhiza supercritical extract (CXS) standardized with xanthorrhizol on lipopolysaccharide (LPS)-induced periodontitis in an animal model. LPS was topically injected into the periodontium of Sprague-Dawley rats to induce periodontitis and CXS (30 and 100 mg·kg-1·day-1) was orally administered after day 12. Histologically, CXS inhibited the collapse of gingival tissue by preventing cell infiltration. CXS significantly downregulated the expression of matrix metalloproteases (MMPs) and inflammation-related biomarkers, such as nuclear factor-kappa B (NF-κB) and interleukin-1 beta (IL-1ß) in gingival tissue. CXS also improved bone remodeling by downregulating osteoclastic transcription factors, such as nuclear factor of activated T-cells c1 (NFATc1), tartrate-resistant acid phosphatase (TRAP), and cathepsin K. In addition, CXS upregulated osteoblast differentiation-related markers, alkaline phosphate (ALP) and collagen type I alpha (COLA1). Thus, CXS can ameliorate periodontitis by inhibiting inflammation and improving bone remodeling.

Size exclusion chromatography of lignin: The mechanistic aspects and elimination of undesired secondary interactions.

Characterization of lignin and its degradation products, more specifically determination of their molecular weight (MW) distribution, is essential for assessment and applications of these potentially renewable phenolics. Several representative gel filtration and gel permeation systems were evaluated in this work focusing on understanding of undesired secondary non-SEC interactions while utilizing four sets of commercially available polymeric standards as well as low-MW lignin model compounds including diarene standards synthesized in-house. The gel permeation column with a nonpolar highly cross-linked porous polystyrene/divinylbenzene-based stationary phase provided the most effective separation by MW for both low and high MW model compounds. Notably, the column with a higher pore and lower particle size provided a better resolution towards polymeric standards, even though the particle size effect was downplayed in the earlier SEC studies of lignin. For two other evaluated gel filtration and gel permeation columns, the separation was strongly affected by functionalities of the analytes and correlated with the compounds' pKa rather than MW. We showed that the separation on the stationary phases featuring polar hydroxyl groups led to specific column-analyte secondary interactions, perhaps based on their hydrogen bonding with lignin. Further, the SEC column evaluation yielded similar results with two sets of chemically different standards. This setup may be used as a general approach to selecting an applicable column for lignin SEC analysis. We confirmed the obtained results with a different independent method implementing a novel approach for lignin number-average MW (Mn) calculation based on laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF-MS) data. The determined Mn corroborated the SEC results.

Rational quality assessment procedure for less-investigated herbal medicines: Case of a Congolese antimalarial drug with an analytical report.

Herbal medicines are the most globally used type of medical drugs. Their high cultural acceptability is due to the experienced safety and efficiency over centuries of use. Many of them are still phytochemically less-investigated, and are used without standardization or quality control. Choosing SIROP KILMA, an authorized Congolese antimalarial phytomedicine, as a model case, our study describes an interdisciplinary approach for a rational quality assessment of herbal drugs in general. It combines an authentication step of the herbal remedy prior to any fingerprinting, the isolation of the major constituents, the development and validation of an HPLC-DAD analytical method with internal markers, and the application of the method to several batches of the herbal medicine (here KILMA) thus permitting the establishment of a quantitative fingerprint. From the constitutive plants of KILMA, acteoside, isoacteoside, stachannin A, and pectolinarigenin-7-O-glucoside were isolated, and acteoside was used as the prime marker for the validation of an analytical method. This study contributes to the efforts of the WHO for the establishment of standards enabling the analytical evaluation of herbal materials. Moreover, the paper describes the first phytochemical and analytical report on a marketed Congolese phytomedicine.

Certification of reference materials for the determination of alkylphenols.

Certified reference materials (CRMs) are playing an increasingly important role in national and international standardizing activities. In Japan, primary standard solutions for analyses of endocrine disrupters are supplied under the national standards dissemination system named the Japan Calibration Service System (JCSS). For the traceability on reference materials used for preparation of the primary standard solutions based on the JCSS, the National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology (NMIJ/AIST) has developed and certified high-purity reference materials of alkylphenols as NMIJ CRMs, such as 4-n-nonylphenol, 4-tert-octylphenol, 4-n-heptylphenol, 4-tert-butylphenol, and 2,4-dichlorophenol. Thereafter, it is essential to determine the alkylphenols by using these solutions based on the JCSS for environmental monitoring and risk assessments because analytical values obtained by using the solutions can ensure the reliability and traceability of the chemical analyses.

Qualitative and quantitative evaluation of phenolic compounds in Iris dichotoma Pall.

INTRODUCTION: The rhizome of Iris dichotoma Pall., a traditional Chinese herbal medicine that contains (iso) flavonoids as the main bioactive compound, has been used to treat several disorders such as inflammation, throat disorders, asthma and coughs. However, there is a lack of suitable methods for its qualitative and quantitative analysis as well as quality control. OBJECTIVES: To establish an HPLC method for the simultaneous determination of phenolic constituents, the identification of characteristic metabolites in the rhizomes of I. dichotoma and to compare their contents in samples from different areas of China. METHODOLOGY: HPLC coupled with diode-array detection (DAD) and electrospray ionisation multistage mass spectrometry (ESI-MS(n) ), and principal component analysis (PCA) were used for the qualitative and quantitative analysis of phenolic compounds in I. dichotoma samples. RESULTS: Twenty characteristic compounds were identified or tentatively characterised. A quantitative HPLC-UV method allowing the simultaneous quantification of 10 phenolic compounds was optimised and validated in terms of linearity, precision, accuracy, and limits of detection and quantification. CONCLUSION: The methodology developed proved to be effective for the identification and quantification of phenolic compounds in the rhizomes of I. dichotoma. Samples were classified into three groups according to their geographical origin based on their phenolic composition using principal component analysis.

Toxicity of 58 substituted anilines and phenols to algae Pseudokirchneriella subcapitata and bacteria Vibrio fischeri: comparison with published data and QSARs.

A congeneric set of 58 substituted anilines and phenols was tested using the 72-h algal growth inhibition assay with Pseudokirchneriella subcapitata and 15-min Vibrio fischeri luminescence inhibition assay. The set contained molecules substituted with one, two or three groups chosen from -chloro, -methyl or -ethyl. For 48 compounds there was no REACH-compatible algal toxicity data available before. The experimentally obtained EC50 values (mg L(-1)) for algae ranged from 1.43 (3,4,5-trichloroaniline) to 197 (phenol) and for V. fischeri from 0.37 (2,3,5-trichlorophenol) to 491 (aniline). Only five of the tested 58 chemicals showed inhibitory effect to algae at concentrations >100 mg L(-1), i.e. could be classified as "not harmful", 32 chemicals as "harmful" (10-100 mg L(-1)) and 21 as "toxic" (1-10 mg L(-1)). The occupied para-position tended to increase toxicity whereas most of the ortho-substituted congeners were the least toxic. As a rule, the higher the number of substituents the higher the hydrophobicity and toxicity. However, in case of both assays, the compounds of similar hydrophobicity showed up to 30-fold different toxicities. There were also assay/organism dependent tendencies: phenols were more toxic than anilines in the V. fischeri assay but not in the algal test. The comparison of the experimental toxicity data to the data available from the literature as well as to QSAR predictions showed that toxicity of phenols to algae can be modeled based on hydrophobicity, whereas the toxicity of anilines to algae as well as toxicity of both anilines and phenols to V. fischeri depended on other characteristics in addition to log K(ow).

Determination of quercetin and resveratrol in whole blood--implications for bioavailability studies.

Resveratrol (trans-3,4',5-trihydroxystilbene) and quercetin (3,3',4',5,7-pentahydroxyflavone) are two naturally occurring polyphenols with the potential to exert beneficial health effects. Since their low bioavailability is a major obstacle to biomedical applications, efforts are being made to improve their absorption and slow down phase II metabolism. An accurate evaluation of the corresponding levels in the bloodstream is important to assess delivery strategies, as well as to verify claims of efficacy based on in vitro results. In the present work we have optimized a simple method ensuring complete stabilization and extraction of resveratrol and quercetin from whole blood. The suitability of different protocols was evaluated by measuring the recovery of polyphenol and internal standard from spiked blood samples via HPLC/UV analysis. The optimized procedure ensured a satisfactory recovery of both internal standards and compounds. Comparing plasma and whole blood, up to 76% of the analyte, being associated with the cellular fraction, was unaccounted for when examining only plasma. This indicates the importance of analysing whole blood rather than plasma to avoid underestimating polyphenol absorption in bioavailability studies.

Determination of the soil-water partition coefficients (logK(OC)) of some mono- and poly-substituted phenols by reversed-phase thin-layer chromatography.

In order to determine the soil-water partition coefficient for eleven mono- and poly-substituted phenolic compounds, for which there is still no literature data available, the possibility of using thin-layer chromatography (TLC) as a means for rapid and reliable logK(OC) estimation was examined. A series of chromatographically derived descriptors: R(M)(0), b, C(0) and PC1 (first principal component), calculated from retention data obtained under reversed-phase conditions, were used for the assessment of models as well as for a direct calibration procedure. The final calibration models are discussed with regard to the achieved accuracy and statistical quality, the type of descriptors used and the corresponding chromatographic conditions. The estimated logK(OC) values of the studied phenols were compared with those obtained by other means: (a) the present OECD guideline based on an HPLC technique; (b) the KOCWIN software package, available free of charge from the US Environmental Protection Agency web site and (c) general LSER models established by Nguyen and coworkers, and Poole and coworkers. The proposed method showed the best agreement with the results obtained by the OECD procedure, followed by the LSER models of Poole and Nguyen. Lower quality correlations were achieved with the KOCWIN calculated values, especially those predicted by molecular connectivity indices.

Biomonitoring Equivalents for bisphenol A (BPA).

Recent efforts worldwide have resulted in a growing database of measured concentrations of chemicals in blood and urine samples taken from the general population. However, few tools exist to assist in the interpretation of the measured values in a health risk context. Biomonitoring Equivalents (BEs) are defined as the concentration or range of concentrations of a chemical or its metabolite in a biological medium (blood, urine, or other medium) that is consistent with an existing health-based exposure guideline. BE values are derived by integrating available data on pharmacokinetics with existing chemical risk assessments. This study reviews available health-based exposure guidance values for bisphenol A (BPA) from Health Canada, the United States Environmental Protection Agency (USEPA) and the European Food Safety Authority (EFSA). BE values were derived based on data on BPA urinary excretion in humans. The BE value corresponding to the oral provisional tolerable daily intake (pTDI) of 25 microg/kg-d from Health Canada is 1mg/L (1.3mg/g creatinine); value corresponding to the US EPA reference dose (RfD) and EFSA tolerable daily intake (TDI) estimates (both of which are equal to 50 microg/kg-d) is 2mg/L (2.6 mg/g creatinine). These values are estimates of the 24-h average urinary BPA concentrations that are consistent with steady-state exposure at the respective exposure guidance values. These BE values may be used as screening tools for evaluation of central tendency measures of population biomonitoring data for BPA in a risk assessment context and can assist in prioritization of the potential need for additional risk assessment efforts for BPA relative to other chemicals.

Weight factors in an Integrated Testing Strategy using adjusted OECD principles for (Q)SARs and extended Klimisch codes to decide on skin irritation classification.

The Integrated Assessment Scheme (IAS) defines weight factors for each piece of toxicological information under REACH in an Integrated Testing Strategy. This IAS is illustrated on skin irritation for Classification and Labelling (C&L) for five substances and using mostly (Q)SAR models. The models are the BfR Rulebase, Derek for Windows and TOPKAT, read across and pH-rules. The weight factors derived in the IAS show that for peracetic-acid and pentabromodiphenylether the C&L decision could be easily made. For bisphenol A additional information on read across was used to finalise a decision on C&L, while for methylphenyl-diisocyanate additional expert judgement was needed. For allylheptanoate only the TOPKAT prediction was in the applicability domain, which was insufficient on its own. Therefore, other non guideline testing information was used and in vitro testing results. The above examples on skin irritation information show how the IAS can aid in the decision making process and how it adds to the ToxRTool and the ITS of Hoffmann et al. on the same endpoint and similar methods.

The hidden face of food phenolic composition.

Plant polyphenols are extremely diverse, due to the occurrence of several basic structures, numerous substitutions and, for some groups, of polymers (tannins). Plant polyphenol composition depends on the plant species and organ, with some molecules specific of particular plant families while others are ubiquitous. The polyphenol content is classically assessed by global analysis methods, which lack specificity and accuracy. These methods have been replaced with high performance liquid chromatography (HPLC), that enables accurate determination of individual molecules, provided they can be unambiguously identified and calibration curves can be established. However, HPLC analysis is restricted to simple compounds and difficult to apply in the case of complex extracts. Further difficulties encountered in the case of polymers include irreversible adsorption on the stationary phases. Proanthocyanidin analysis by HPLC after acid-catalysed depolymerisation in the presence of a nucleophile permits to overcome these problems and shows that proanthocyanidins predominate in the polyphenol composition of most plants. Large varietal differences in tannin quantitative and qualitative composition were observed for all plant species studied. Moreover, analysis is usually performed after extraction, which may lead to significant underestimation of the polyphenol content, since a large proportion is not extracted by usual solvents. This may be due to covalent binding to other plant constituents and to non-covalent adsorption on plant solids. Such matrix effect also influences the taste perception of polyphenols and their fate in the digestive tract, from in-mouth interactions with salivary proteins to their metabolism by colon microflora, with potential influence on bioavailability.

Stability of active ingredients of traditional Chinese medicine (TCM).

Studies on stability of active ingredients are fundamental and critical for the rational development of Traditional Chinese Medicine (TCM) in view of its modernization and worldwide use. The stability of both active and marker constituents of plants used in TCM is reviewed for the first time. More than 100 papers, mostly written in Chinese, have been reviewed. Studies concerning plant constituents were analyzed according to their chemical classification of active ingredients. In addition, several crude drugs of animal origin are also reported. Stability of active ingredients is summarized during extraction and/or storage of the herbal drug preparations, and under stress conditions (pH, temperature, solvents, light, and humidity) and in the presence of preservatives, antioxidants, and metals.

[Contribution to the phytochemical study of polyphenols in ten hydroalcoholic extracts of Chamomile floss]. / Contributii la analiza fitochimica a polifenolilor existenti in extracte hidroalcoolice preparate din mostre comerciale de Chamomillae flos.

UNLABELLED: Continuing a series of studies that intend to evaluate the pharmaceutical quality of 10 commercial samples of chamomile, we tried to investigate the chemical composition of the hydroalcoholic extracts obtained in our laboratory, starting from this raw material. MATERIAL AND METHOD: The qualitative and semiquantitative analysis of the extracts was done by HPLC means. RESULTS: All extractive solutions have a high content in ferulic acid, whereas the caffeic acid level is the lowest. Regarding the flavonoids, there are many quantitative differences between the samples: one extract lacking the rutoside and two of them having low apigenin-7-glucoside contents.

Selective extraction of Cyclopia for enhanced in vitro phytoestrogenicity and benchmarking against commercial phytoestrogen extracts.

Previous work established the phytoestrogenicity of "unfermented"Cyclopia (honeybush) extracts. The current study investigated the phytoestrogenicity of four Cyclopia harvestings (M6-9) for preparation of extracts with enhanced phytoestrogenicity for benchmarking against commercial preparations. Two extracts, from M6 (C. subternata) and M7 (C. genistoides), were identified as most phytoestrogenic using estrogen receptor binding, an estrogen receptor response element containing promoter reporter assay, alkaline phosphatase activity, and E-screen. M6 and M7 were sequentially and non-sequentially extracted with five solvents of differing polarities. Additionally, two extracts were prepared in the traditional way of preparing a cup of honeybush tea. The resultant 22 extracts were evaluated for estrogenicity. Select extracts were analysed by high-pressure liquid chromatography (HPLC) and liquid chromatography mass spectrometry (LC-MS). The sequentially extracted M6 methanol extract (SM6Met) had the highest potency and the sequentially extracted M6 ethyl acetate extract (SM6EAc) had the highest efficacy of all the extracts. The HPLC results suggested enrichment of luteolin in SM6EAc and enrichment of an unidentified polyphenol in SM6Met. Benchmarking against four commercial phytoestrogenic preparations suggest that in terms of the assays used, Cyclopia extracts have comparable potency and efficacy to the commercial extracts and thus have potential as marketable phytoestrogenic nutraceuticals.

Development of a potential reference material for evaluating antioxidant activity.

Phenolic phytochemical are known to perform several functions ranging from phytoprotectants, to protecting lipids in food products, to antioxidant activity in animals and humans. The need for a common standard mixture containing multiple phenolic phytochemicals is critical for the development of a robust validation assay for accurately quantifying antioxidant activity in various matrixes. Different research groups have used A wide array of single purified reference phenolic compounds in this regard. A 5 compound mixture (caffeic acid, morin hydrate, hesperetin, catechin hydrate, and epigallocatechin gallate) containing phenolic compounds from 4 subgroups (phenolic acid, flavone, flavanone, and flavan-3-ol) was prepared. The mixture was assayed for stability evaluation by high-performance liquid chromatography (HPLC) using a diode array detection procedure for a 3 month time interval. HPLC analysis confirmed that there was no significant interaction between different components of the mixture. The among-sample relative standard deviation (RSD) of all 5 phenolic compounds, as well as the total HPLC area, was < 1%. The RSD due to instrument variation was < 2% and the total RSD among-days was < 5%. These results unambiguously suggest that the sample was stable for a 3 month time interval in an amber vial stored in a refrigerator below 5 degrees C. This mixture is currently being used for the single-laboratory validation study for the assay of total phenolic content by the Folin-Ciocalteu method and the antioxidant capacity by oxygen radical absorbing capacity procedure.

Determination of bisphenol A in water by isotope dilution headspace solid-phase microextraction and gas chromatography/mass spectrometry without derivatization.

The original solid-phase microextraction (SPME) fibers use an epoxy resin adhesive that releases bisphenol A (BPA) during thermal desorption of the fiber. This adversely affects the method detection limit and accuracy when these products are used for the determination of BPA. In this work, 5 new metal alloy SPME fibers that do not use epoxy resins were compared for the extraction of BPA in water. The performance of the optimum SPME fiber with 60 microm carbowax-polyethylene glycol coating for the headspace SPME of BPA in water was investigated systematically under different extraction conditions. Salt was found to increase the partitioning of BPA from water into the headspace until saturation was reached. Partitioning of BPA from water into the headspace also increased at higher extraction temperatures, as did longer extraction times. However, extraction of BPA from water onto the SPME fiber was not improved for solutions adjusted to pH 2 compared to the unadjusted neutral solutions. The new BPA method showed good linearity over the concentration range of 2.5 to 40 microg/L [correlation coefficient (r2) = 0.995] . The method detection limit for BPA was 0.5 microg/L, while the instrument detection limit was as low as 0.05 microg/L. Good repeatability was observed for BPA at levels of 5 and 20 microg/L with relative standard deviation values < 10%. The automated headspace SPME method developed in this work was used to investigate migration of BPA from polycarbonate bottles into water, and levels of BPA in water ranged from 1.7 to 4.1 microg/L.