Overhauser Dynamic Nuclear Polarization with Selectively Deuterated BDPA Radicals.

The Overhauser effect (OE), commonly observed in NMR spectra of liquids and conducting solids, was recently discovered in insulating solids doped with the radical 1,3-bisdiphenylene-2-phenylallyl (BDPA). However, the mechanism of polarization transfer in OE-DNP in insulators is yet to be established, but hyperfine coupling of the radical to protons in BDPA has been proposed. In this paper we present a study that addresses the role of hyperfine couplings via the EPR and DNP measurements on some selectively deuterated BDPA radicals synthesized for this purpose. Newly developed synthetic routes enable selective deuteration at orthogonal positions or perdeuteration of the fluorene moieties with 2H incorporation of >93%. The fluorene moieties were subsequently used to synthesize two octadeuterated BDPA radicals, 1,3-[α,γ-d8]-BDPA and 1,3-[ß,δ-d8]-BDPA, and a BDPA radical with perdeuterated fluorene moieties, 1,3-[α,ß,γ,δ-d16]-BDPA. In contrast to the strong positive OE enhancement observed in degassed samples of fully protonated h21-BDPA (ε ∼ +70), perdeuteration of the fluorenes results in a negative enhancement (ε ∼ -13), while selective deuteration of α- and γ-positions (aiso ∼ 5.4 MHz) in BDPA results in a weak negative OE enhancement (ε ∼ -1). Furthermore, deuteration of ß- and δ-positions (aiso ∼ 1.2 MHz) results in a positive OE enhancement (ε ∼ +36), albeit with a reduced magnitude relative to that observed in fully protonated BDPA. Our results clearly show the role of the hyperfine coupled α and γ 1H spins in the BDPA radical in determining the dominance of the zero and double-quantum cross-relaxation pathways and the polarization-transfer mechanism to the bulk matrix.

De novo design of self-assembly hydrogels based on Fmoc-diphenylalanine providing drug release.

Short peptides with self-assembled nanostructures are widely applied in the areas of drug delivery systems and biomaterials. In this article, we create a new peptide-based hydrogelator (Fmoc-FFRRVR) based on N-fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF) through an approach to improve its hydrophilicity. Compared to Fmoc-FF, Fmoc-FFRRVR prefers to form a hydrogel under mild conditions, and the gelation time is only 2 s. Fmoc-FFRRVR self-assembles into organized arrays of ß-sheets in nanofibers via π-stacking of Fmoc-FF, which are supported by circular dichroism and fluorescence emission spectroscopy. Rheology results confirm that the hydrogel of Fmoc-FFRRVR is elastic, reversible and injectable. The newly discovered hydrogel not only retains some excellent performances of Fmoc-FF, but also can be used as a drug carrier for biomedical applications.

Rh(iii)-Catalysed synthesis of cinnolinium and fluoranthenium salts using C-H activation/annulation reactions: organelle specific mitochondrial staining applications.

The construction of a novel class of indazolo[2,1-a]cinnolin-7-ium and diazabenzofluoranthenium salts was developed by using Rh(iii)-catalyzed C-H activation/annulation reactions with 2-phenyl-2H-indazole, and internal alkynes, which resulted in structurally important polycyclic heteroaromatic compounds (PHAs). This reaction uses mild reaction conditions and has a high efficiency, low catalyst loading, and wide substrate scope. The overall catalytic process involves C-H activation followed by C-C/C-N bond formation. Furthermore, the synthesised cinnolinium/fluoranthenium salts exhibit potential fluorescence properties and 5i was targeted in particular for specific mitochondrial staining in order to investigate cancer cell lines.

Solid-Phase Total Synthesis of Dehydrotryptophan-Bearing Cyclic Peptides Tunicyclin B, Sclerotide A, CDA3a, and CDA4a using a Protected ß-Hydroxytryptophan Building Block.

A new approach to the synthesis of Z-dehydrotryptophan (ΔTrp) peptides is described. This approach uses Fmoc-ß-HOTrp(Boc)(TBS)-OH as a building block, which is readily prepared in high yield and incorporated into peptides using solid-phase Fmoc chemistry. The tert-butyldimethylsilyl-protected indolic alcohol is eliminated during global deprotection/resin cleavage to give ΔTrp peptides exclusively as the thermodynamically favored Z isomer. This approach was applied to the solid-phase synthesis of tunicyclin B, sclerotide A, CDA3a, and CDA4a.

Metric-Based Analysis of Convergence in Complex Molecule Synthesis.

Convergent syntheses are characterized by the coupling of two or more synthetic intermediates of similar complexity, often late in a pathway. At its limit, a fully convergent synthesis is achieved when commercial or otherwise readily available intermediates are coupled to form the final target in a single step. Of course, in all but exceptional circumstances this level of convergence is purely hypothetical; in practice, additional steps are typically required to progress from fragment coupling to the target. Additionally, the length of the sequence required to access each target is a primary consideration in synthetic design.In this Account, we provide an overview of alkaloid, polyketide, and diterpene metabolites synthesized in our laboratory and present parameters that may be used to put the degree of convergence of each synthesis on quantitative footing. We begin with our syntheses of the antiproliferative, antimicrobial bacterial metabolite (-)-kinamycin F (1) and related dimeric structure (-)-lomaiviticin aglycon (2). These synthetic routes featured a three-step sequence to construct a complex diazocyclopentadiene found in both targets and an oxidative dimerization to unite the two halves of (-)-lomaiviticin aglycon (2). We then follow with our synthesis of the antineurodegenerative alkaloid (-)-huperzine A (3). Our route to (-)-huperzine A (3) employed a diastereoselective three-component coupling reaction, followed by the intramolecular α-arylation of a ß-ketonitrile intermediate, to form the carbon skeleton of the target. We then present our syntheses of the hasubanan alkaloids (-)-hasubanonine (4), (-)-delavayine (5), (-)-runanine (6), (+)-periglaucine B (7), and (-)-acutumine (8). These alkaloids bear a 7-azatricyclo[4.3.3.01,6]dodecane (propellane) core and a highly oxidized cyclohexenone ring. The propellane structure was assembled by the addition of an aryl acetylide to a complex iminium ion, followed by intramolecular 1,4-addition. We then present our synthesis of the guanidinium alkaloid (+)-batzelladine B (9), which contains two complex polycyclic guanidine residues united by an ester linkage. This target was logically disconnected by an esterification to allow for the independent synthesis of each guanidine residue. A carefully orchestrated cascade reaction provided (+)-batzelladine B (9) in a single step following fragment coupling by esterification. We then discuss our synthesis of the diterpene fungal metabolite (+)-pleuromutilin (10). The synthesis of (+)-pleuromutilin (10) proceeded via a fragment coupling involving two neopentylic reagents and employed a nickel-catalyzed reductive cyclization reaction to close the eight-membered ring, ultimately providing access to (+)-pleuromutilin (10), (+)-12-epi-pleuromutilin (11), and (+)-12-epi-mutilin (12). Finally, we discuss our synthesis of (-)-myrocin G (13), a tricyclic pimarane diterpene that was assembled by a convergent annulation.In the final section of this Account, we present several paramaters to analyze and quantitatively assess the degree of convergence of each synthesis. These parameters include: (1) the number of steps required following the point of convergence, (2) the difference in the number of steps required to prepare each coupling partner, (3) the percentage of carbons (or, more broadly, atoms) present at the point of convergence, and (4) the complexity generated in the fragment coupling step. While not an exhaustive list, these parameters bring the strengths and weaknesses each synthetic strategy to light, emphasizing the key contributors to the degree of convergence of each route while also highlighting the nuances of these analyses.

Fluorene/fluorenone carboxamide derivatives as selective light-up fluorophores for c-myc G-quadruplex.

The development of fluorescent dyes capable of selective recognition of G-quadruplexes is essential for studying its localization and biological functions. However, considering the G-quadruplex topologies may vary significantly, the synthesis of compounds showing both selectivity and strong fluorescence properties still remains a great challenge. Recently we have developed fluorene/fluorenone derivatives with structure-specific binding towards dsRNA, indicating its potential for structure-selective ligands. Herein, we report the synthesis of novel fluorene/fluorenone derivatives and their selectivity towards various DNA structures, particularly G-quadruplexes, two of which showed strong affinity to the proto-oncogene c-myc promoter G-quadruplex.

Synthesis and Biological Evaluation of (2S,2'S)-Lomaiviticin A.

(-)-Lomaiviticin A (1) is a genotoxic C2-symmetric metabolite that arises from the formal dimerization of two bis(glycosylated) diazotetrahydrobenzo[b]fluorenes. Here we present a synthesis of the monomer 17 and its coupling to form (2S,2'S)-lomaiviticin A (4), an unnatural diastereomer of 1. (2S,2'S)-Lomaiviticin A (4) is significantly less genotoxic, a result we attribute to changes in the orientation of the diazofluorene and carbohydrate residues, relative to 1. These data bring the importance of the configuration of the conjoining bond to light and place the total synthesis of 1 itself within reach.

Structure-activity relationship (SAR) studies on the mutagenic properties of 2,7-diaminofluorene and 2,7-diaminocarbazole derivatives.

We discovered that 2,7-diaminofluorene or 2,7-diaminocarbazole moiety can be employed as a core structure of highly effective NS5A inhibitors that are connected through amide bonds to proline-valine-carbamate motifs. Amide bonds can be easily cleaved via various metabolic pathways upon administration into the body, and metabolites containing 2,7-diaminofluorene and 2,7-diaminocarbazole core structures have been known to be strong mutagens. To avoid the mutagenesis issue of these core structures, we examined various functional groups at the C9 or N9 position of 2,7-diaminofluorene or 2,7-diaminocarbazole, respectively, through the Ames test in TA98 and TA100 mutants of Salmonella typhimurium LT-2. We discovered that, through proper alkyl substitution at the C9 or N9 position, 2,7-diaminofluorene and 2,7-diaminocarbazole moieties can be successfully employed in drug discovery without necessarily causing mutagenicity problems.

Efficient Method for the Concentration Determination of Fmoc Groups Incorporated in the Core-Shell Materials by Fmoc-Glycine.

In this paper, we described the synthesis procedure of TiO2@SiO2 core-shell modified with 3-(aminopropyl)trimethoxysilane (APTMS). The chemical attachment of Fmoc-glycine (Fmoc-Gly-OH) at the surface of the core-shell structure was performed to determine the amount of active amino groups on the basis of the amount of Fmoc group calculation. We characterized nanostructures using various methods: transmission electron microscope (TEM), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) to confirm the modification effectiveness. The ultraviolet-visible spectroscopy (UV-vis) measurement was adopted for the quantitative determination of amino groups present on the TiO2@SiO2 core-shell surface by determination of Fmoc substitution. The nanomaterials were functionalized by Fmoc-Gly-OH and then the fluorenylmethyloxycarbonyl (Fmoc) group was cleaved using 20% (v/v) solution of piperidine in DMF. This reaction led to the formation of a dibenzofulvene-piperidine adduct enabling the estimation of free Fmoc groups by measurement the maximum absorption at 289 and 301 nm using UV-vis spectroscopy. The calculations of Fmoc loading on core-shell materials was performed using different molar absorption coefficient: 5800 and 6089 dm3 × mol-1 × cm-1 for λ = 289 nm and both 7800 and 8021 dm3 × mol-1 × cm-1 for λ = 301 nm. The obtained results indicate that amount of Fmoc groups present on TiO2@SiO2-(CH2)3-NH2 was calculated at 6 to 9 µmol/g. Furthermore, all measurements were compared with Fmoc-Gly-OH used as the model sample.

Water-soluble oligofluorenes bearing N1-alkylcytosine side chains as turn-on and turn-off materials in telomere DNA length sensing.

Water-soluble cationic and anionic oligofluorenes bearing N1-alkylcytosine side chains, namely OF-1 and OF-2, were synthesized. The photoluminescence (PL) intensity of an aqueous solution of OF-1 decreased on the addition of (TTAGGG)m as telomere DNA models. In contrast, the PL intensity of OF-2 increased on the addition of DNA.

Synthesis and Spectrophotometric Analysis of 1-Azafluorenone Derivatives.

A new extension for the 'one pot' construction of diverse 1-azafluorene derivatives featuring a Diels-Alder/retro-Diels-Alder cycloaddition is reported. Conditions were also determined for oxidation to the derived azafluorenones. The spectrophotometric analysis of five different azafluorenones were performed. Moderate fluorescence was observed with azafluorenone derivatives that bear an imbedded pyridone motif; whereas those bearing substituted pyridines do not fluoresce.

Photostable and Orthogonal Solvatochromic Fluorophores for Simultaneous In Situ Quantification of Multiple Cellular Signaling Molecules.

Ratiometric fluorescence sensors are powerful tools for direct quantification of diverse biological analytes. To overcome a shortage of solvatochromic fluorophores crucial for in situ ratiometric imaging of biological targets, we prepared and characterized a small library of modular fluorophores with diverse spectral properties. Among them, WCB and WCR showed excellent spectral properties, including high photostability, brightness, and solvatochromism, and are ideally suited for dual ratiometric imaging due to their spectral orthogonality. By conjugating WCB and WCR with protein-based lipid sensors, we were able to achieve robust simultaneous in situ quantitative imaging of two metabolically linked signaling lipids, phosphatidylinositol-4,5-bisphosphate and phosphatidylinositol-3,4,5-trisphosphate in live cells. This study shows that any combination of signaling molecules can be simultaneously quantified in a spatiotemporally resolved manner by ratiometric imaging with finely tuned solvatochromic fluorophores.

Liquid chromatography-diode array-mass spectrometric analysis of amino and mercapto compounds coupled with chloroimino derivatization reagent.

A new derivatization reagent, N-(naphthalen-1-yl)-2-oxopropanehydrazonoyl chloride (UOSA54), was prepared and coupled with four drugs, bearing primary amino, secondary amino or mercapto functional groups. Glucosamine sulfate (GLU), cysteine (CYS), captopril (CAP), and vildagliptin (VIL), were used as representative reactive analytes. The prepared reagent was successfully coupled with the targeted analytes in the presence of triethylamine (TEA) as hydrochloride acceptor and acetonitrile as solvent. The resulting reaction products were separated by high-performance liquid chromatography and monitored simultaneously by diode array and triple quad mass spectrometry detectors. Enhanced DAD and electrospray ionization-MS (ESI-MS) responses were observed for the derivatized products. Complete derivatization of VIL was achieved after heating at 65 ± 3 °C for 4 min, while other analytes were derivatized instantaneously at room temperature. Both, the ESI-ionization suppression, due to the excess reagent, and matrix effect, due to co-eluted biogenic plasma constituents, were negligible. The derivatized GLU, CYS, CAP, and VIL showed a maximum absorption wavelength at 376, 417, 340, and 376 nm, with MS-limit of quantification value of 250.0, 2.0, 2.5, and 3.0 pg/µL, respectively. The relative ESI-MS response of UOSA54 derivatization products was within the range of 0.6-4.1 compared with dansylated products. The method was optimized and validated for optimal reaction product stability, sensitivity, linearity, range, precision, and accuracy. The percentage recovery was exceeding 97.2%, with an RSD value of less than 4.0%. The limit of quantification of targeted analytes was ranged from 80.0 to 0.7 pg/µL.

Synthesis, experimental and in silico studies of N-fluorenylmethoxycarbonyl-O-tert-butyl-N-methyltyrosine, coupled with CSD data: a survey of interactions in the crystal structures of Fmoc-amino acids.

Recently, fluorenylmethoxycarbonyl (Fmoc) amino acids (e.g. Fmoc-tyrosine or Fmoc-phenylalanine) have attracted growing interest in biomedical research and industry, with special emphasis directed towards the design and development of novel effective hydrogelators, biomaterials or therapeutics. With this in mind, a systematic knowledge of the structural and supramolecular features in recognition of those properties is essential. This work is the first comprehensive summary of noncovalent interactions combined with a library of supramolecular synthon patterns in all crystal structures of amino acids with the Fmoc moiety reported so far. Moreover, a new Fmoc-protected amino acid, namely, 2-{[(9H-fluoren-9-ylmethoxy)carbonyl](methyl)amino}-3-{4-[(2-hydroxypropan-2-yl)oxy]phenyl}propanoic acid or N-fluorenylmethoxycarbonyl-O-tert-butyl-N-methyltyrosine, Fmoc-N-Me-Tyr(t-Bu)-OH, C29H31NO5, was successfully synthesized and the structure of its unsolvated form was determined by single-crystal X-ray diffraction. The structural, conformational and energy landscape was investigated in detail by combined experimental and in silico approaches, and further compared to N-Fmoc-phenylalanine [Draper et al. (2015). CrystEngComm, 42, 8047-8057]. Geometries were optimized by the density functional theory (DFT) method either in vacuo or in solutio. The polarizable conductor calculation model was exploited for the evaluation of the hydration effect. Hirshfeld surface analysis revealed that H...H, C...H/H...C and O...H/H...O interactions constitute the major contributions to the total Hirshfeld surface area in all the investigated systems. The molecular electrostatic potentials mapped over the surfaces identified the electrostatic complementarities in the crystal packing. The prediction of weak hydrogen-bonded patterns via Full Interaction Maps was computed. Supramolecular motifs formed via C-H...O, C-H...π, (fluorenyl)C-H...Cl(I), C-Br...π(fluorenyl) and C-I...π(fluorenyl) interactions are observed. Basic synthons, in combination with the Long-Range Synthon Aufbau Modules, further supported by energy-framework calculations, are discussed. Furthermore, the relevance of Fmoc-based supramolecular hydrogen-bonding patterns in biocomplexes are emphasized, for the first time.

Phthalocyanine-Cored Fluorophores with Fluorene-Containing Peripheral Two-Photon Antennae as Photosensitizers for Singlet Oxygen Generation.

: A series of free base and Zn(II) phthalocyanines featuring fluorenyl antennae linked by methoxy or oxo bridges to the phthalocyanine core (Pc) were synthesized and characterized. Selected linear and nonlinear (two-photon absorption) optical properties of these new compounds were subsequently studied. As previously observed for related porphyrin dendrimers bearing 2-fluorenyl peripheral dendrons, an efficient energy transfer occurs from the peripheral antennae to the central phthalocyanine core following excitation in the fluorenyl-based π-π* absorption band of these chromophores. Once excited, these compounds relax to the ground state, mostly by emitting intense red light or by undergoing intersystem crossing. As a result, the tetrafunctionalized Zn(II) phthalocyanines are fluorescent, but can also efficiently photosensitize molecular oxygen in tetrahydrofurane (THF), forming singlet oxygen with nearly comparable yields to bare Zn(II) phthalocyanine (ZnPc). In comparison with the latter complex, the positive role of the fluorenyl-containing antennae on one- and two-photon brightness (2PA) is presently demonstrated when appended in peripheral (ß) position to the phthalocyanine core. Furthermore, when compared to known porphyrin analogues, the interest in replacing the porphyrin by a phthalocyanine as the central core to obtain more fluorescent two-photon oxygen photosensitizers is clearly established. As such, this contribution paves the way for the future development of innovative biphotonic photosensitizers usable in theranostics.

Fluorescence Imaging of Mitochondria with Three Different Sets of Signals Based on Fluorene Cation Fluorescent Probe.

Herein, we develop a novel mitochondria-targetable fluorescence probe (FVPI) based on fluorene cation derivative. This mitochondria-targetable fluorescence probe exhibits large Stokes shift in various solutions. In addition, FVPI displays numerous advantages, including high photostability, low cytotoxicity, and two-photon properties. View of the above features, FVPI is successfully capable of imaging mitochondria in biological systems with three different sets of signals. This finding will provide a new platform for the constructing mitochondria-targetable fluorescent probes with excellent optical properties.

New generations of spirobifluorene regioisomers for organic electronics: tuning electronic properties with the substitution pattern.

The spirobifluorene (SBF) fragment constitutes one of the most important scaffolds used in the design of Organic Semi-Conductors (OSCs) for organic electronics. In the last ten years, new generations of SBF positional isomers have appeared in the literature. The different positions of substitution (C1, C3 or C4) have allowed the tuning of the electronic properties of great interest for the further design of functional materials. The high potential of these new generations of organic semi-conductors in electronics has been demonstrated notably when they are used as host materials for Phosphorescent Organic Light-Emitting Diodes (OLEDs) or for Thermally Activated Delayed Fluorescence OLEDs. In the present feature article, we present these new generations of SBF compounds and the impact of positional isomerism on the electronic properties and device performance. Particularly, we show how the different structural and electronic parameters (nature of the linkages, bridge substitution and steric hindrance) drive the electrochemical and photophysical properties of SBF regioisomers and can be modulated. Such studies lay the foundation for material design for organic electronics.

Synthesis and biological evaluation of 9-fluorenone derivatives for SPECT imaging of α7-nicotinic acetylcholine receptor.

The α7-nicotinic acetylcholine receptor (α7-nAChR) subtype, is found to have a connection with the pathogenesis of a variety of psychiatric and neurological disorders. Herein, we report the development of radioiodinated 9-fluorenone derivatives as single-photon emission computed tomography (SPECT) imaging tracers for α7-nAChRs. Among the derivatives, the best member of the series 10 (Ki = 2.23 nM) were radiolabeled with 125I for in vitro and in vivo studies. The radiotracer [125I]10 exhibited robust brain uptake and specifically labeled α7-nAChRs with a peak uptake value of 9.49 ±â€¯0.87%ID/g in brain. Blocking studies demonstrated that the tracer was highly specific toward α7-nAChR. Furthermore, ex vivo autoradiography and micro-SPECT/CT dynamic imaging in mice confirmed the excellent imaging properties. In addition, molecular docking was also performed to rationalize the potency of the chosen compounds towards α7-nAChRs. To conclude, compound 10 could serve as a promising radiotracer for the α7-nAChRs.

A Tripeptide Approach to the Solid-Phase Synthesis of Peptide Thioacids and N-Glycopeptides.

A general and robust method for the incorporation of aspartates with a thioacid side chain into peptides has been developed. Pseudoproline tripeptides served as building blocks for the efficient fluorenylmethyloxycarbonyl (Fmoc) solid-phase synthesis of thioacid-containing peptides. These peptides were readily converted to complex N-glycopeptides by using a fast and chemoselective one-pot deprotection/ligation procedure. Furthermore, a novel side reaction that can lead to site-selective peptide cleavage using thioacids (CUT) was discovered and studied in detail.

Synthesis and Intramolecular Energy- and Electron-Transfer of 3D-Conformeric Tris(fluorenyl-[60]fullerenylfluorene) Derivatives.

New 3D conformers were synthesized to show a nanomolecular configuration with geometrically branched 2-diphenylaminofluorene (DPAF-C2M) chromophores using a symmetrical 1,3,5-triaminobenzene ring as the center core for the connection of three fused DPAF-C2M moieties. The design led to a class of cis-cup-tris[(DPAF-C2M)-C60(>DPAF-C9)] 3D conformers with three bisadduct-analogous cages per nanomolecule facing at the same side of the geometrical molecular cis-cup-shape structure. A sequential synthetic route was described to afford this 3D configurated conformer in a high yield with various spectroscopic characterizations. In principle, a nanostructure with a non-coplanar 3D configuration in design should minimize the direct contact or π-stacking of fluorene rings with each other during molecular packing to the formation of fullerosome array. It may also prevent the self-quenching effect of its photoexcited states in solids. Photophysical properties of this cis-cup-conformer were also investigated.