Pilot study: External surface contamination of gemcitabine and 5-fluorouracil on drug packaging.

INTRODUCTION: Antineoplastic drugs (ADs) are commonly used pharmaceuticals for anticancer treatments. It has previously been shown that the external surface of drug vials frequently is contaminated with ADs. More than a decade ago methods to prevent occupational exposure were introduced by using plastic coverage of the glass vials or packing vials in a secondary plastic container. The aim of the pilot study was to determine contamination levels of ADs on different parts of AD packaging of two different commercially available drug vials on the Swedish market and to investigate the occurrence of cross contamination of ADs. METHODS: Packagings of gemcitabine (GEM) and 5-fluorouracil (5-FU) were tested by wipe sampling. Five ADs; GEM, 5-FU, cyclophosphamide (CP), ifosfamide and etoposide were quantified using liquid chromatography mass spectrometry. RESULTS: AD contaminations were detected in 69% and 60% of the GEM and 5-FU packaging samples. Highest levels, up to approximately 5 µg/sample, were observed on the glass vials. The protective shrink-wrap of 5-FU vials and the plastic container of GEM were contaminated with low levels of 5-FU and GEM, respectively, and furthermore the 5-FU vials with shrink-wrap were cross-contaminated with GEM. Cross-contamination of CP and GEM was detected on 5-FU vials with plastic shrink-wrap removed. CONCLUSIONS: External contamination of ADs are still present at primary drug packagings on the Swedish market. Protection of AD vials by plastic shrink-wrap or a secondary plastic container does not remove the external contamination levels completely. The presence of cross contamination of ADs on drug packagings was also observed.

Proposals of guidance values for surface contamination by antineoplastic drugs based on long term monitoring in Czech and Slovak hospitals and pharmacies.

Introduction: The exposures to hazardous antineoplastic drugs (AD) represent serious risks for health care personnel but the exposure limits are not commonly established because of the no-threshold effects (genotoxic action, carcinogenicity) of many ADs. In this study, we discussed and derived practically applicable technical guidance values (TGV) suitable for management of AD risks. Methods: The long-term monitoring of surface contamination by eight ADs was performed in pharmacies and hospitals in the Czech Republic and Slovak Republic in 2008-2021; in total 2,223 unique samples were collected repeatedly in 48 facilities. AD contamination was studied by LC-MS/MS for cyclophosphamide, ifosfamide, methotrexate, irinotecan, paclitaxel, 5-fluorouracil and gemcitabine and by ICP-MS for total Pt as a marker of platinum-based ADs. Results: The study highlighted importance of exposure biomarkers like 5-fluorouracil and especially carcinogenic and persistent cyclophosphamide, which should be by default included in monitoring along with other ADs. Highly contaminated spots like interiors of laminar biological safety cabinets represent a specific issue, where monitoring of contamination does not bring much added value, and prevention of staff and separated cleaning procedures should be priority. Rooms and surfaces in health care facilities that should be virtually free of ADs (e.g., offices, kitchenettes, daily rooms) were contaminated with lower frequency and concentrations but any contamination in these areas should be carefully examined. Discussion and conclusions: For all other working places, i.e., majority of areas in pharmacies and hospitals, where ADs are being prepared, packaged, stored, transported, or administered to patients, the study proposes a generic TGV of 100 pg/cm2. The analysis of long-term monitoring data of multiple ADs showed that the exceedance of one TGV can serve as an indicator and trigger for improvement of working practices contributing thus to minimizing of unintended exposures and creating a safe work environment.

Evaluation of long-term data on surface contamination by antineoplastic drugs in pharmacies.

PURPOSE: The handling of antineoplastic drugs represents an occupational health risk for employees in pharmacies. To minimize exposure and to evaluate cleaning efficacy, wipe sampling was used to analyze antineoplastic drugs on surfaces. In 2009, guidance values were suggested to facilitate the interpretation of results, leading to a decrease in surface contamination. The goal of this follow-up was to evaluate the time trend of surface contamination, to identify critical antineoplastic drugs and sampling locations and to reassess guidance values. METHODS: Platinum, 5-fluorouracil, cyclophosphamide, ifosfamide, gemcitabine, methotrexate, docetaxel and paclitaxel were analyzed in more than 17,000 wipe samples from 2000 to 2021. Statistical analysis was performed to describe and interpret the data. RESULTS: Surface contaminations were generally relatively low. The median concentration for most antineoplastic drugs was below the limit of detection except for platinum (0.3 pg/cm2). Only platinum and 5-fluorouracil showed decreasing levels over time. Most exceedances of guidance values were observed for platinum (26.9%), cyclophosphamide (18.5%) and gemcitabine (16.6%). The most affected wipe sampling locations were isolators (24.4%), storage areas (17.6%) and laminar flow hoods (16.6%). However, areas with no direct contact to antineoplastic drugs were also frequently contaminated (8.9%). CONCLUSION: Overall, the surface contaminations with antineoplastic drugs continue to decrease or were generally at a low level. Therefore, we adjusted guidance values according to the available data. The identification of critical sampling locations may help pharmacies to further improve cleaning procedure and reduce the risk of occupational exposure to antineoplastic drugs.

Four-year follow-up of surface contamination by antineoplastic drugs in a compounding unit.

OBJECTIVES: This study aimed to monitor the contamination by antineoplastic drugs on work surfaces in a compounding unit 4 years after its implementation. METHODS: This descriptive study was done in a unit performing on average 45 000 preparations per year. Surface sampling points (N=23) were monitored monthly in the frame of routine activity from the opening of an anticancer drug compounding unit. Contamination with nine antineoplastic drugs (cyclophosphamide, ifosfamide, dacarbazine, 5-fluorouracil, methotrexate, gemcitabine, cytarabine, irinotecan and doxorubicin) was assessed on wipes with a local liquid chromatography coupled with a tandem mass spectrometer analysis. The contamination rate (CR, %) was prospectively monitored every month during the entire study period. The occurrence of critical incidents was also registered. The effect of each safety measure implemented during this period was also analysed. RESULTS: Based on the 1104 samples collected between March 2016 and March 2020, the CR was 18.5%. If three different critical incidents among a vial breakage that occurred were individually considered, this CR was slightly lower than that in the literature. Eight months after opening and taking different corrective actions, the overall CR dropped from 42.39% to 11.52% (p<0.001). Contamination was limited to the area that includes the compounding room and, more precisely, the welder and the QC-Prep+ sampling points. CONCLUSIONS: From the beginning of the study and from month to month, surface contamination was limited to the nearest sampling points to the compounding unit. This 4-year monitoring study allowed us to determine the intravenous conventional antineoplastic drugs and sampling points to be focused on.

Study on the Use of Ozone Water as a Chemical Decontamination Agent for Antineoplastic Drugs in Clinical Settings.

The exposure of healthcare workers to antineoplastic drugs in hospitals has been recognized to be harmful. To minimize the risk of exposure, the removal of these drugs from work environments, such as compounding facilities, has been recommended. In our previous paper, the degradation and inactivation efficacy of ozone water, which is being introduced into Japanese hospitals as a chemical decontamination agent, was reported for its effects on typical antineoplastic drugs (gemcitabine, irinotecan, paclitaxel). This article aims to further investigate the efficacy of ozone water for eight antineoplastic drugs to clarify its application limitations. A small amount (medicinal ingredient: typically ca. 1.5 µmol) of formulation containing 5-fluorouracil, pemetrexed, cisplatin, oxaliplatin, cyclophosphamide, ifosfamide, doxorubicin, or docetaxel was mixed with 50 mL of ozone water (~8 mg/L), and the resulting solutions were analyzed by high-performance liquid chromatography over time to observe the degradation. Consequently, the ozonation was overall effective for the degradation of the drugs, however this varied depending on the chemical structures of the drugs and additives in their formulations. In addition, after the parent drugs were completely degraded by the ozonation, the degradation mixtures were subjected to 1H nuclear magnetic resonance spectroscopy and evaluated for mutagenicity against Salmonella typhimurium strains and cytotoxicity against human cancer cells. The degradation mixtures of cisplatin and ifosfamide were mutagenic while those of the other drugs were non-mutagenic. Further, the ozonation resulted in clear decreases of cytotoxicity for 5-fluorouracil, oxaliplatin, and doxorubicin, but increases of cytotoxicity for pemetrexed, cisplatin, cyclophosphamide, and ifosfamide. These results suggest that the ozone water should be restrictedly used according to the situation of contamination in clinical settings because the ozonation enhances toxicity depending on the drug even if degradation is achieved.

Safe disconnection of 5-fluorouracil elastomeric pumps: The benefit of a closed-system-transfer device designed for cytotoxic drug administration/perfusion.

BACKGROUND: Occupational exposure to cytotoxic drugs can lead to significant health problems. This study was designed to evaluate the risk of 5-fluorouracil (5-FU) contamination for nurses when disconnecting the infusion line of an elastomeric pump from a non-coring needle, by comparing three configurations: the first one using standard Male and Female Luer lock (Group 1), the second one using a needle-free connector (NFC) and a Male Luer lock (Group 2) and the third one using a closed-system transfer device (CSTD), Qimono® (Group 3). METHODS: In this in vitro study, 10 elastomeric pumps for each of the three groups were filled with 5-FU and a tissue mimicking the patient's arm was placed below the connection between the infusion line and the tubing of non-coring needle. After 48 h of infusion, disconnection was performed by a nurse with a wipe soaked in a mix of chlorhexidine and isopropyl alcohol in order to mimic care practices. For each pump, the tissue, the pair of gloves and the wipes used during the disconnection were collected for analysis. RESULTS: Median level of overall 5-FU contamination (gloves + wipes + tissues) in group 3 was significantly lower than in group 1 (p = 0.018) and group 2 (p = 0.036). There was no difference between groups 1 and 2. Results per sample type showed no difference in contamination between the three configurations for the gloves as well as for the tissues. Concerning the wipes, the lowest contamination was observed in group 3, representing a mean reduction of 61% compared to group 1 and a mean reduction of 43% compared to group 2. CONCLUSION: The use of Qimono® appears to significantly reduce 5-FU contamination when disconnecting infusion lines of an elastomeric pump unlike NFC and standard Luer lock.

Occupational Exposure Assessment to Antineoplastic Drugs in Nine Italian Hospital Centers over a 5-Year Survey Program.

In the present study, surface contamination where antineoplastic drugs (ADs) are present was investigated, as occupational exposure risk is still an open debate. Despite recommendations and safety standard procedures being in place in health care settings, quantifiable levels of ADs are being reported in the recent literature. Thus, a survey monitoring program was conducted over five years (2016-2021) in nine Italian hospitals. The repeated surveys produced 8288 data points that have been grouped according to the main hospital settings, such as pharmacy areas and patient care units. Based on the most often prepared ADs, the investigated drugs were cyclophosphamide (CP), gemcitabine (GEM), 5-fluorouracil (5-FU), and platinum compounds (Pt). Patient care units had a frequency of positive wipe samples (59%) higher than pharmacies (44%). Conversely, pharmacies had a frequency of positive pad samples higher (24%) than patient care units (10%). Moreover, by statistical analysis, pad samples had a significantly higher risk of contamination in pharmacy areas than in patient care units. In this study, the 75th and the 90th percentiles of the contamination levels were obtained. The 90th percentile was chosen to describe a suitable benchmark that compares results obtained by the present research with those previously reported in the literature. Based upon surface contamination loads, our data showed that 5-FU had the highest concentration values, but the lowest frequency of positive samples. In pharmacy areas, the 90th percentile of 5-FU data distribution was less than 0.346 ng/cm2 and less than 0.443 ng/cm2 in patient care units. AD levels are higher than those reported for health care settings in other European countries yet trends of contamination in Italy have shown to decrease over time.

Efficient electrochemical removal of 5-fluorouracil pharmaceutical from wastewater by mixed metal oxides via anodic oxidation process.

Nowadays, the entry of organic compounds into water resources is one of the leading global concerns due to the lack of water resources and rapid population growth. In this research, anodic oxidation (AO) method was used to remove 5-fluorouracil (5-FU) from aqueous solutions via Ni/RuO2 and Ti/IrO2-TiO2-RuO2 electrodes as cathode and anode, respectively. For this purpose, the characterization analysis of the electrodes, including X-ray diffraction, scanning electron microscopy, energy dispersive X-ray, and atomic force microscopy were performed. The electrochemical performance of the anode was investigated via cyclic voltammetry analysis. Then, the effect of operational variables, including applied current (mA), initial pH of the solution, initial 5-FU concentration (mg/L), and process time (min) on the 5-FU removal efficiency under the AO process was evaluated via artificial neural network (ANN) modeling. The results revealed that the maximum 5-FU removal efficiency was 96.96%. The applied current intensity, pH, initial 5-FU concentration, and process time were 300 mA, 5, 20 mg/L, and 140 min, respectively. Moreover, the investigation of 5-FU removal by-products and mineralization efficiency of the AO process was carried out via gas chromatography-mass spectrometry and total organic carbon analysis, respectively. The total organic carbon mineralization efficiency was 84.80% after 6 h of reaction time. The reusability and stability of the Ti/IrO2-TiO2-RuO2 anode on 5-FU removal efficiency were measured and showed an approximately 5% decay in 5-FU removal efficiency after eight consecutive runs. The overall results and analysis confirmed this method is capable of removing 5-FU through Ti/IrO2-TiO2-RuO2 anode and Ni/RuO2 cathode from aqueous medium.

Validation of chemotherapy drug vapor containment of an air cleaning closed-system drug transfer device.

PURPOSE: The purpose of this study was to test the efficacy of ChemfortTM, an air filtration closed-system drug transfer device to prevent release of chemotherapy drug vapors and aerosols under extreme conditions. The air cleaning system is based on the adsorption of drug vapors by an activated carbon filter in the Vial Adaptor before the air is released out of the drug vial. The functionality of the carbon filter was also tested at the end of device's shelf life, and after a contact period with drug vapors for 7 days. Cyclophosphamide and 5-fluorouracil were the chemotherapy drugs tested. METHODS: The Vial Adaptor was attached to a drug vial and both were placed in a glass vessel. A needle was punctured through the vessel stopper and the Vial Adaptor septum to allow nitrogen gas to flow into the vial and to exit the vial via the air filter into the glass vessel which was connected to a cold trap. Potential contaminated surfaces in the trap system were wiped or rinsed to collect the escaped drug. Samples were analyzed using liquid chromatography tandem mass spectrometry. RESULTS: Cyclophosphamide and 5-fluorouracil were detected on most surfaces inside the trap system for all Vial Adaptors without an activated carbon filter. Contamination did not differ between the Vial Adaptors with and without membrane filter indicating no effect of the membrane filter. The results show no release of either drug for the Vial Adaptors with an activated carbon filter even after 3 years of simulated aging and 7 days of exposure to drug vapors. CONCLUSIONS: Validation of air cleaning CSTDs is important to secure vapor and aerosol containment of chemotherapy and other hazardous drugs. The presented test method has proven to be appropriate for the validation of ChemfortTM Vial Adaptors. No release of cyclophosphamide and 5- fluorouracil was found even for Vial Adaptors after 3 years of simulated aging and 7 days of exposure to drug vapors.

A quantitative LC-MS method to determine surface contamination of antineoplastic drugs by wipe sampling.

The main objective was to develop a wipe sampling test to measure surface contamination of the most frequently used antineoplastic drugs (ADs) in Swedish healthcare and, furthermore, to develop an analysis method sensitive enough to assess low levels of contamination. Two wipe sampling tests with separate sample processing methods assessing (i) cyclophosphamide (CP), ifosfamide (IF), 5-fluorouracil (5-FU), etoposide (ETO), gemcitabine (GEM) and cytarabine (CYT) (Wipe Test 1); and (ii) GEM, CYT and methotrexate (MTX) (Wipe Test 2), respectively, were developed by optimization of absorption and extraction efficiencies using different wipe tissue materials, tissue wetting solution, and extraction solvents. A fast liquid chromatography tandem mass spectrometry method was developed for simultaneous detection of the studied ADs. The limit of quantification for the method was between 0.04 to 2.4 ng/wipe sample (0.10 to 6.1 pg/cm2 for an area of 400 cm2) and at 50 ng/sample the within-day precision was between 1.3 and 15%, and the accuracy between 102 and 127%. Wipe Test 1 was applied in an assessment of cleaning efficiency of five different cleaning solutions (formic acid, water, sodium hydroxide, ethanol, and sodium dodecyl sulfate (SDS) for removal of ADs from surfaces made of stainless steel or plastic. For CP, IF, 5-FU, GEM, and CYT 92% of the AD were removed regardless of surface and cleaning solution. In conclusion, a user-friendly assessment method to measure low levels of seven ADs in the work environment was developed and validated. Assessment of the decontamination efficiency of cleaning solutions concerning removal of ADs from stainless steel showed that efficiencies differed depending on the AD with water being the least effective cleaning agent. The results suggests that a combination of different cleaning agents including detergent and a solution with an organic component would be optimal to efficiently remove the measured ADs from surfaces in the workplace.