Facile synthesis of magnetic carbon nanotubes derived from ZIF-67 and application to magnetic solid-phase extraction of profens from human serum.

Magnetic carbon nanotubes (CNTs) with encapsulated Co nanoparticles (Co@CNTs), was synthesized by exploiting the one-step pyrolysis strategy using ZIF-67 as template. The as-synthesized Co@CNTs is provided with the nanopores, a large specific surface area, and strong magnetic response. The obtained Co@CNTs was used as magnetic solid-phase extraction adsorbents to extract two profens including flurbiprofen and ketoprofen. The parameters of extraction efficiency, involving extraction time, sample solution volume, ionic strength, pH and the conditions of desorption efficiency, were optimized in detail. After determined by high-performance liquid chromatography-ultraviolet (HPLC-UV), the results evinced that Co@CNTs showed a high extraction efficiency with high enrichment factors of 832 and 672. The good linear range of both flurbiprofen and ketoprofen were all 5.0-1000 ng L-1, with the limit of detection were 0.60 ng L-1 and 0.70 ng L-1, respectively. Furthermore, a valid method for the extraction of flurbiprofen and ketoprofen from human serum was established. The spiking recoveries of two profens were between 86.74% and 97.22%, and the relative standard deviation was less than 6.55%. Co@CNTs can be repeatedly used at least 10 times, indicating its excellent regeneration and reusability. The results demonstrated that the Co@CNTs materials exhibits high enrichment ability and extraction efficiency, playing great promise in MSPE.

Hybrid monoliths with metal-organic frameworks in spin columns for extraction of non-steroidal drugs prior to their quantitation by reversed-phase HPLC.

A (glycidyl methacrylate)-co-(ethylene glycol dimethacrylate) polymer (poly(GMA-co-EDMA)) was functionalized with metal-organic frameworks (MOF) and used as a sorbent for solid-phase extraction (SPE). The polymeric sorbent was prepared in-situ by photopolymerization in a previously wall-modified spin column, and then modified with an amino-modified MOF of type NH2-MIL-101(Cr). The sorbents were used for the extraction of nonsteroidal anti-inflammatory drugs (NSAIDs) from human urine samples. The sorbent was compared with the parent monolith and embedded approach, where the MOF particles are admixed in the polymerization mixture before the in-situ polymerization in the modified spin column. SPE is performed by percolating the sample solutions in a centrifuge, which streamlines the SPE steps. The hybrid composites were characterized by scanning electron microscopy and nitrogen intrusion porosimetry. Three NSAIDs (ketoprofen, flurbiprofen, and ibuprofen) were tested. They were eluted from the sorbent with acidified water-acetonitrile mixtures and subsequently analyzed by reversed-phase HPLC with UV detection. The detection limits varied in the range from 0.1 to 7 µg·L-1, and the precisions (relative standard deviation) were <14% in all the cases. The recoveries were between 71.0 and 78.0% in spiked urine samples. Graphical abstractA hybrid monolith modified with amino-modified MOF [named NH2-MIL-101(Cr)] in wall-modified spin columns was prepared. The resulting micro-extraction device was applied to the extraction and preconcentration of non-steroidal anti-inflammatory drugs.

Enantioseparation of flurbiprofen enantiomers using chiral ionic liquids by liquid-liquid extraction.

Flurbiprofen is a kind of nonsteroidal anti-inflammatory drug, which has been widely used in clinic for treatment of rheumatoid arthritis and osteoarthritis. It has been reported that S-flurbiprofen shows good performance on clinic anti-inflammatory treatment, while R-enantiomer almost has no pharmacological activities. It has important practical values to obtain optically pure S-flurbiprofen. In this work, chiral ionic liquids, which have good structural designability and chiral recognize ability, were selected as the extraction selector by the assistance of quantum chemistry calculations. The distribution behaviors of flurbiprofen enantiomers were investigated in the extraction system, which was composed of organic solvent and aqueous phase containing chiral ionic liquid. The results show that maximum enantioselectivity up to 1.20 was attained at pH 2.0, 25°C using 1,2-dichloroethane as organic solvent, 1-butyl-3-methylimidazole L-tryptophan ([Bmim][L-trp]) as chiral selector. The racemic flurbiprofen initial concentration was 0.2 mmol L-1 , and [Bmim][L-trp] concentration was 0.02 mol L-1 . Furthermore, the recycle of chiral ionic liquids has been achieved by reverse extraction process of the aqueous phase with chiral selector, which is significant for industrial application of chiral ionic liquids and scale-up of the extraction process.

Enantioseparation of Racemic Flurbiprofen by Aqueous Two-Phase Extraction With Binary Chiral Selectors of L-dioctyl Tartrate and L-tryptophan.

A novel method for chiral separation of flurbiprofen enantiomers was developed using aqueous two-phase extraction (ATPE) coupled with biphasic recognition chiral extraction (BRCE). An aqueous two-phase system (ATPS) was used as an extracting solvent which was composed of ethanol (35.0% w/w) and ammonium sulfate (18.0% w/w). The chiral selectors in ATPS for BRCE consideration were L-dioctyl tartrate and L-tryptophan, which were screened from amino acids, ß-cyclodextrin derivatives, and L-tartrate esters. Factors such as the amounts of L-dioctyl tartrate and L-tryptophan, pH, flurbiprofen concentration, and the operation temperature were investigated in terms of chiral separation of flurbiprofen enantiomers. The optimum conditions were as follows: L-dioctyl tartrate, 80 mg; L-tryptophan, 40 mg; pH, 4.0; flurbiprofen concentration, 0.10 mmol/L; and temperature, 25 °C. The maximum separation factor α for flurbiprofen enantiomers could reach 2.34. The mechanism of chiral separation of flurbiprofen enantiomers is discussed and studied. The results showed that synergistic extraction has been established by L-dioctyl tartrate and L-tryptophan, which enantioselectively recognized R- and S-enantiomers in top and bottom phases, respectively. Compared to conventional liquid-liquid extraction, ATPE coupled with BRCE possessed higher separation efficiency and enantioselectivity without the use of any other organic solvents. The proposed method is a potential and powerful alternative to conventional extraction for separation of various enantiomers.

Parallel artificial liquid membrane extraction of acidic drugs from human plasma.

The new sample preparation concept "Parallel artificial liquid membrane extraction (PALME)" was evaluated for extraction of the acidic drugs ketoprofen, fenoprofen, diclofenac, flurbiprofen, ibuprofen, and gemfibrozil from human plasma samples. Plasma samples (250 µL) were loaded into individual wells in a 96-well donor plate and diluted with HCl to protonate the acidic drugs. The acidic drugs were extracted as protonated species from the individual plasma samples, through corresponding artificial liquid membranes each comprising 2 µL of dihexyl ether, and into corresponding acceptor solutions each comprising 50 µL of 25 mM ammonia solution (pH 10). The liquid membranes and the acceptor solutions were located in a 96-well filter plate, which was sandwiched with the 96-well donor plate during extraction. Parallel extraction of several samples was performed for 15 to 60 min, followed by high-performance liquid chromatography-ultraviolet detection of the individual acceptor solutions. Important PALME parameters including the chemical composition of the liquid membrane, extraction time, and sample pH were optimized, and the extraction performance was evaluated. Except for flurbiprofen, exhaustive extraction was accomplished from plasma. Linearity was obtained for all six drugs in the range 0.025-10 µg/mL, with r (2) values ranging between 0.998 and 1.000. Precision data were in the range 3-22% RSD, and accuracy data were within 72-130% with spiked plasma samples. Based on the current experiences, PALME showed substantial potential for future high-throughput bioanalysis of non-polar acidic drugs.

Evaluation of amino acid ester-based ionic liquids as buffer additives in CE for the separation of 2-arylpropionic acids nonsteroidal anti-inflammatory drugs.

The aim of the present study is the CE performance evaluation for the separation of 2-arylpropionic acid nonsteroidal anti-inflammatory drugs. In particular, the separation of indoprofen, carprofen, ketoprofen, ibuprofen, and flurbiprofen was obtained by supporting the BGE either with SDS or an amino acid ester-based ionic liquid (AAIL). The performance of these additives was evaluated by comparing migration times, efficiencies and %RSD values. The addition of the AAIL into the BGE provided baseline separation within 10 min, while in the case of SDS, the analytes eluted within 23 min. The optimum conditions involve a BGE of 100 mM Tris/10 mM sodium tetraboratedecahydrate (pH 8) and 40 mM l-alanine tert butyl ester lactate or 10 mM SDS and a temperature of 35°C for AAIL and 20°C for SDS. The run-to-run reproducibility was evaluated by computing the %RSD values of the EOF and the analyte peaks. When the AAIL was used, an excellent reproducibility was obtained, since all %RSD values were below 1.3%. On the contrary, the addition of SDS resulted in much higher RSD values (2.1-11.7%). The efficiency values of all analyte peaks were above 102 000 for l-AlaC4 Lac, in comparison to SDS, which provided efficiency values between 47000 and 76000. Finally, in an attempt to study the synergistic effect of SDS and AAIL, both additives were added into the BGE at concentrations of 10 and 40 mM, respectively. The results were similar to the ones obtained when SDS was used as the sole additive.

Determination of non-steroidal anti-inflammatory drugs in urine by the combination of stir membrane liquid-liquid-liquid microextraction and liquid chromatography.

A stir membrane liquid phase microextraction procedure working under the three-phase mode is proposed for the first time for the determination of six anti-inflammatory drugs in human urine. The target compounds are isolated and preconcentrated using a special device that integrates the extractant and the stirring element. An alkaline aqueous solution is used as extractant phase while 1-octanol is selected as supported liquid membrane solvent. After the extraction, all the analytes are determined by liquid chromatography (LC) with ultraviolet detection (UV). The analytical method is optimized considering the main involved variables (e.g., pH of donor and acceptor phases, extraction time, stirring rate) and the results indicate that the determination of anti-inflammatory drugs at therapeutic and toxic levels is completely feasible. The limits of detection are in the range from 12.6 (indomethacin) to 30.7 µg/L (naproxen). The repeatability of the method, expressed as relative standard deviation (RSD, n = 5) varies between 3.4% (flurbiprofen) and 5.7% (ketoprofen), while the enrichment factors are in the range from 35.0 (naproxen) to 72.5 (indomethacin).

Biotransformation of flurbiprofen by Cunninghamella species.

The biotransformation of the fluorinated anti-inflammatory drug flurbiprofen was investigated in Cunninghamella spp. Mono- and dihydroxylated metabolites were detected using gas chromatography-mass spectrometry and fluorine-19 nuclear magnetic resonance spectroscopy, and the major metabolite 4'-hydroxyflurbiprofen was isolated by preparative high-pressure liquid chromatography (HPLC). Cunninghamella elegans DSM 1908 and C. blakesleeana DSM 1906 also produced a phase II (conjugated) metabolite, which was identified as the sulfated drug via deconjugation experiments.

Enantiomeric separation of acidic compounds by nano-liquid chromatography with methylated-beta-cyclodextrin as a mobile phase additive.

Some racemic nonsteroidal anti-inflammatory drugs, namely naproxen, indoprofen, ketoprofen, flurbiprofen, carprofen, cicloprofen, flunoxaprofen and suprofen were separated into their enantiomers by nano-LC. Chiral recognition was achieved adding to the mobile phase heptakis (2,3,6-tri-O-methyl)-beta-cyclodextrin (TM-beta-CD). Capillary columns of 100 microm id, packed with different RP particles were used for experiments. Effect of experimental parameters such as mobile phase composition, stationary phase type and length of packed capillary column on retention factor and chiral resolution of analytes were studied. The stationary phase type played a very important role in the enantiorecognition process. Best results in terms of highest enantioresolution factor and largest number of separated enantiomers were obtained reducing the particles size to 3 microm with RP(18) stationary phase. Most favourable mobile phase for enantiodiscrimination was obtained using relatively low concentrations of ACN (30%, v/v), 30 mM of TM-beta-CD and pH value of 3.0. The retention time of all studied enantiomers decreased by increasing the CD derivative concentration. The retention factors of selected studied compounds, specifically flurbiprofen, naproxen and suprofen, were measured employing TM-beta-CD concentrations in the range 0-40 mM. Assuming a 1:1 enantiomer/CD ratio, the apparent association constants of the studied enantiomers were calculated.

Enantioseparation of flurbiprofen on amylose-derived chiral stationary phase by supercritical fluid chromatography.

The separation of the enantiomers of flurbiprofen on an amylose-derived chiral stationary phase, Chiralpak AD-H, by supercritical fluid chromatography (SFC) under both linear and non-linear conditions is studied. Pulse injections were implemented using supercritical CO2 modified with methanol as a mobile phase at a temperature of 30 degrees C. At linear conditions, the isotherm is determined directly from the chromatogram. Under overload conditions, the elution profiles were described by competitive Langmuir and bi-Langmuir isotherm. Isotherm parameters were estimated using the inverse method and the effects of operation variables such as pressure and modifier composition were studied. The value of selectivity is from 1.9 to 2.1 while the value of resolution is from 5.3 to 11.8. The number of theoretical plates is always greater than 5000 indicating high efficiency of SFC.

Molecular cloning and functional expression of esf gene encoding enantioselective lipase from Serratia marcescens ES-2 for kinetic resolution of optically active (S)-flurbiprofen.

An enantioselective lipase gene (esf) for the kinetic resolution of optically active (S)-flurbiprofen was cloned from the new strain Serratia marcescens ES-2. The esf gene was composed of a 1,845-bp open reading frame encoding 614 amino acid residues with a calculated molecular mass of 64,978 Da. The lipase expressed in E. coli was purified by a three-step procedure, and it showed preferential substrate specificity toward the medium-chain-length fatty acids. The esf gene encoding the enantioselective lipase was reintroduced into the parent strain S. marcescens ES-2 for secretory overexpression. The transformant S. marcescens BESF secreted up to 217 kU/ ml of the enantioselective lipase, about 54-fold more than the parent strain, after supplementing 3.0% Triton X-207. The kinetic resolution of (S)-flurbiprofen was carried out even at an extremely high (R,S)-flurbiprofen ethyl ester [(R,S)-FEE] concentration of 500 mM, 130 kU of the S. marcescens ES-2 lipase per mmol of (R,S)-FEE, and 1,000 mM of succinyl beta-cyclodextrin as the dispenser at 37 degrees C for 12 h, achieving the high enantiomeric excess and conversion yield of 98% and 48%, respectively.

Electrokinetic migration of acidic drugs across a supported liquid membrane.

Electrokinetic cross membrane extraction of acidic drugs was demonstrated for the first time. The acidic drugs were extracted from an alkaline aqueous donor solution (300 microl), through a thin supported liquid membrane of 1-heptanol sustained in the pores of the wall of a porous hollow fiber, and into an aqueous alkaline acceptor solution (30 microl) present inside the lumen of the hollow fiber by the application of a d.c. electrical potential. The negative electrode was placed in the donor solution, and the positive electrode was placed in the acceptor solution. Optimal extractions were accomplished with 1-heptanol as the supported liquid membrane, with 50 V as the driving force, and with pH 12.0 in both the donor and acceptor solutions, respectively (NaOH). Equilibrium extraction conditions were obtained after 5 min of operation with the whole assembly agitated at 1200 rpm. Eleven different acidic drugs were extracted with recovery values between 8 and 100%, and initial data supported that electrokinetic cross membrane extraction provided repeatable data and linear response between original donor concentration and final acceptor concentration of the acidic model compounds.

Separation strategy for acidic chiral pharmaceuticals with capillary electrochromatography on polysaccharide stationary phases.

The effect of five factors on the capillary electrochromatographic enantioseparation of acidic compounds was studied using an experimental design. The studied factors were pH, acetonitrile content in the mobile phase, temperature, buffer concentration, and applied voltage. These experiments allowed defining a generic separation strategy applicable on acidic compounds with chemical and structural diversity. The starting screening conditions consist of a 45 mM ammonium formate electrolyte at pH 2.9 mixed with 65% acetonitrile, an applied voltage of 15 kV, and a temperature of 25 degrees C. The screening phase occasionally can be followed by an optimization procedure. Evaluation of the proposed strategy pointed out that it allows achieving baseline resolution within a relatively short time when a beginning of separation is obtained at the starting conditions. This strategy revealed enantioselectivity for 11 compounds out of 15, of which 10 could be baseline-separated after the proposed optimization steps.

Simultaneous chiral discrimination of multiple profens by cyclodextrin-modified capillary electrophoresis in normal and reversed polarity modes.

Simultaneous enantioseparations of nine profens for their accurate chiral discrimination were achieved by capillary electrophoresis (CE) in the normal polarity (NP) mode with a single cyclodextrin (CD) system and in the reversed polarity (RP) mode with a dual CD system. The single CD system in the NP mode employed heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TMbetaCD) added at 75 mM-100 mM 2-(N-morpholino)ethanesulfonic acid buffer (pH 6.0) as the optimum run buffer. The dual CD system operated in the RP mode used 30 mM TMbetaCD and 1.0% anionic carboxymethyl-beta-cyclodextrin dissolved in pH 3.0, 100 mM phosphoric acid-triethanolamine buffer containing 0.01% hexadimethrine bromide added to reverse the electroosmotic flow. Fairly good enantiomeric resolutions and the opposite enantiomer migration orders were achieved in the two modes. Relative migration times to internal standard under respective optimum conditions were characteristic of each enantiomer with good precision (< 2% relative standard deviation, RSD), thereby enabling to crosscheck the chemical identification of profens and also their accurate chiralities. The method linearity in the two modes was found to be adequate (r > or = 0.9991) for the chiral assay of the profens investigated. Simultaneous enantiomeric purity test of ibuprofen, ketoprofen and flurbiprofen in a mixture was feasible in a single analysis by the present method.

Enhancement of selectivity and resolution in the enantioseparation of uncharged compounds using mixtures of oppositely charged cyclodextrins in capillary electrophoresis.

The enantiomeric separation of some nonsteroidal anti-inflammatory drugs (NSAIDs) was investigated in capillary electrophoresis (CE) using dual systems with mixtures of charged cyclodextrin (CD) derivatives. A significant enhancement of selectivity and resolution could be achieved in the enantioseparation of these analytes in their uncharged form by the simultaneous addition of two oppositely charged CD derivatives to the background electrolyte. The combination of the single-isomer cationic CD, permethyl-6-monoamino-6-monodeoxy-beta-CD (PMMAbetaCD) and the single-isomer polyanionic CD, heptakis-6-sulfato-beta-cyclodextrin (HSbetaCD) in a pH 2.5 phosphoric acid-triethanolamine buffer, was designed and employed for the enantioseparation of profens. The improvement in selectivity and resolution can be attributed to the fact that the two CDs, which lead to independent and enantioselective complexation with the analyte enantiomers, have not only opposite effects on the electrophoretic mobility of these compounds but also opposite affinity patterns towards the enantiomers of these compounds. Binding constants for these enantiomers with each CD were determined using linear regression approach, in order to be able to predict the effect of the concentrations of the two CDs on enantiomeric selectivity and resolution in such dual systems.

Effect of dextran as a run buffer additive in drug-protein binding studies using capillary electrophoresis frontal analysis.

The study of drug-protein interactions by capillary electrophoresis frontal analysis requires establishment of a sufficient mobility difference between the mobility of the ligand and protein. The potential utility of dextran as a run buffer additive to manipulate the electrophoretic mobilities of low molecular weight ligands and protein in capillary electrophoresis frontal analysis binding studies was assessed. It was demonstrated that dextran was effective in improving the separation between the ligands warfarin and flurbiprofen and human serum albumin. Separation of ligand and protein increased with the concentration of added dextran (0-7.5% (w/w)), while molecular weight of the additive (70,000-2,000,000) only had a minor effect. The effect of dextran addition on viscosity and electrophoretic and electroosmotic mobilites was systematically studied. Optimal frontal analysis settings were a compromise between achieving satisfactory separation and acceptable analysis times without loss of plateau peak conditions. No effect of dextran upon the drug-human serum albumin interactions could be detected for the model ligands. Introduction of dextran into the electrophoresis buffer expands the applicability of capillary electrophoresis frontal analysis in drug research to binding interactions between proteins and low molecular weight ligands possessing similar electrophoretic mobilities.

Thermodynamic study of the enantiomeric resolution of flurbiprofen by HPLC using Chiralpak AD-RH column.

The chiral resolution of (+/-)-flurbiprofen was achieved using water-acetonitrile (60:40, v/v) containing 0.1% acetic acid on a Chiralpak AD-RH column at 20 degrees C. The enantio-resolution was studied with different percentages of acetonitrile. Thermodynamic parameters (enthalpy, entropy and free energy) were calculated by carrying out the enantio-resolution experiments at 0 to 60 degrees C. The enantio-resolution was found to be exothermic in nature. Attempts have been made to explain the mechanism of chiral resolution of flurbiprofen on the Chiralpak AD-RH column.

Chiral resolution of flurbiprofen and ketoprofen enantiomers by HPLC on a glycopeptide-type column chiral stationary phase.

Vancomycin is an amphoteric, glycopeptide, macrocyclic antibiotic. When attached to 5 microspherical silica gel, vancomycin proved to be an effective chromatographic chiral stationary phase that could be used in the reversed-phase mode. In this study, a bonded vancomycin chiral stationary phase (Chirobiotic Vtrade mark) was investigated for the chiral liquid chromatography analysis of ketoprofen and flurbiprofen. The selectivity factor (alpha) and the chiral resolution factor (RS) of Chirobiotic Vtrade mark were evaluated first as a function of the buffer pH and molarity, and second as a function of organic modifier type and composition of the mobile phase. Four organic modifiers (tetrahydrofuran, 2-propanol, 1,4-dioxane and methanol) have been tested for their selectivity. Optimized conditions using 20% of tetrahydrofuran in ammonium nitrate (100 mM, pH 5) were selected for the enantioseparation of flurbiprofen and ketoprofen from their racemic forms. At pH 5, these acidic compounds are almost negatively charged, while the chiral selector possesses a positive charge allowing it to interact electrostatistically with the analytes. Using these chromatographic conditions, the column stability was excellent over several months of experiments.

Directed control of electroosmotic flow in nonaqueous electrolytes using poly(ethylene glycol) coated capillaries.

Poly(ethylene glycol) (PEG)-coated capillaries exhibit unique properties in nonaqueous electrolytes. Immobilized PEG interacts significantly with different cations present in nonaqueous electrolytes. This can induce a positive surface charge on PEG-coated capillaries and results in an adjustable anodic electroosmotic flow (EOF) in nonaqueous electrolytes whereas a reduced cathodic EOF is observed in aqueous electrolytes. The EOF can reversibly be adjusted by the variation of the electrolyte constitution, namely the type of the solvent used and the nature and concentration of background cations. In methanol and especially in acetonitrile electrolytes the magnitude and also the direction of EOF is strongly dependent on the water content. Using different alkali metal cations, the EOF can be increased, reduced, or even reversed depending on the nature of the cation. The directed manipulation of EOF in methanolic electrolytes using PEG-coated capillaries was applied for optimization of nonaqueous capillary electrophoretic separations of acidic compounds with regard to reproducibility, resolution, and analysis time.

[Chiral separation of naproxen and flurbiprofen by capillary electrophoresis].

The acidic chiral drugs naproxen and flurbiprofen were successfully separated into two enantiomers when beta-cyclodextrins (beta-CDs) were used as chiral selectors by capillary zone electrophoresis, under the conditions of 0.1 mol/L phosphate buffer with pH 4.92. The comparison of four CDs, namely beta-CD, DM-beta-CD, HP-beta-CD and TM-beta-CD for chiral separation was made. Naproxen can be separated by either beta-CD or its derivatives, while flurbiprofen can only be separated by TM-beta-CD among the CDs. The elution order of enantiomers of naproxen in different CDs was also studied, and the R form always eluted before S form when any of the four CDs was used as chiral selectors. The method of chiral separation for weak acidic compounds was also developed. It was proved that the optimum pH value for their chiral separation was about 5, close to its pKa value.