Accuracy of implant abutment level digital impressions using stereophotogrammetry in edentulous jaws: an in vitro pilot study.

BACKGROUND: In edentulous jaws, factors such as the number of implants, cross-arch distribution, and the angle among implants may affect the accuracy of the implant impression. This study explored factors influencing the accuracy of implant abutment-level digital impressions using stereophotogrammetry in edentulous jaws. METHODS: Two standard all-on-4 and all-on-6 models of edentulous jaws were constructed in vitro. In the stereophotogrammetry group (PG), the implant digital impression was made using stereophotogrammetry and saved as an STL file. In the conventional group (CNV), the impression was made using the open-tray splint impression technique. An electronic and optical 3D measuring instrument was used to scan the standard model and the conventional plaster model to obtain STL files. Using 3D data processing software (GOM Inspect Pro, Zeiss), the distance and angle between the abutments in the CNV impression and the PG impression were measured and compared with the data from the standard model. RESULTS: The distance deviation in the PG and the CNV was 145 ± 196 µm and 96 ± 150 µm, respectively, with a significant difference (P < 0.001). The angle deviation in the PG and the CNV was 0.82 ± 0.88° and 0.74 ± 0.62°, respectively, with no significant difference (P = 0.267). In the PG, the distance deviation was negatively correlated with the distance between implants (r = -0.145, P = 0.028) and positively correlated with the angle of implants (r = 0.205, P = 0.002). The angle deviation was negatively correlated with the distance between implants (r = -0.198, P = 0.003) and positively correlated with the angle of implants (r = 0.172, P = 0.009). In the CNV, the effect of inter-implant distance on impression accuracy was also shown by Spearman correlation analysis: r = 0.347 (P < 0.001) for distance deviation and r = -0.012 (P = 0.859) for angle deviation. The effect of inter-implant angulation on impression accuracy deviation was r = -0.026 (P = 0.698) for distance deviation and r = 0.056 (P = 0.399) for angle deviation. CONCLUSIONS: The CNV method is closer to the real value of the original model. The distance between implants and the distribution angle had a weak correlation with the accuracy of digital impressions but no significant correlation with the accuracy of traditional impressions.

The Accuracy of the CBCT-Based 3-Dimensional Replica of the Donor Tooth in Autotransplantation.

BACKGROUND: This study evaluated the accuracy of the CBCT reconstruction model compared to the natural tooth and the accuracy of the replica tooth compared to the natural tooth. OBJECTIVE: The hypothesis was that a replica tooth could be used as a surgical guide in autotransplantation. METHODS: Three teeth were chosen and a CBCT reconstruction model was formed from each tooth. STL-data was transferred to a milling machine and replica teeth were milled from PEEK. A digitized surface model was prepared from the natural and the replica teeth by a stereophotogrammetry scanner. The surface model from the optical scan of the natural tooth was compared to the CBCT reconstruction model and the surface model of the replica tooth. The models were matched on each other, and surface-based rigid registration was performed between the surface models. Distances were calculated and visualized by MATLAB. RESULTS: The CBCT reconstruction model and the natural tooth were compared. The largest euclidean distance was found at the root tip in the premolar (0.93 mm) and at the furcation area in the molar (2.3 mm). When the natural tooth and the replica tooth were compared, the largest euclidean distance was found at the root tip in the premolar (1.5 mm) and at the furcation area in the molar (1.9 mm). CONCLUSION: A CBCT scan maintains sufficient image quality for tooth autotransplantation planning. The replica tooth corresponded in size and shape to the natural tooth in terms of clinically expected need of precision.

Immersive Photorealistic Three-Dimensional Neurosurgical Anatomy of the Cerebral Arteries: A Photogrammetry-Based Anatomic Study.

BACKGROUND AND OBJECTIVES: Neurosurgeons need a profound knowledge of the surgical anatomy of the cerebral arteries to safely treat patients. This is a challenge because of numerous branches, segments, and tortuosity of the main blood vessels that supply the brain. The objective of this study was to create high-quality three-dimensional (3D) anatomic photorealistic models based on dissections of the brain arterial anatomy and to incorporate this data into a virtual reality (VR) environment. METHODS: Two formaldehyde-fixed heads were used. The vessels were injected with radiopaque material and colored silicone and latex. Before the dissections, the specimens were computed tomography scanned. Stratigraphical anatomic dissection of the neck and brain was performed to present the relevant vascular anatomy. A simplified surface scanning method using a mobile phone-based photogrammetry application was used, and the data were incorporated into a VR 3D modeling software for post-processing and presentation. RESULTS: Fifteen detailed layered photorealistic and two computed tomography angiography-based 3D models were generated. The models allow manipulation in VR environment with sufficient photographic detail to present the structures of interest. Topographical relevant anatomic structures and landmarks were annotated and uploaded for web-viewing and in VR. Despite that the VR application is a dedicated 3D modeling platform, it provided all necessary tools to be suitable for self-VR study and multiplayer scenarios with several participants in one immersive environment. CONCLUSION: Cerebral vascular anatomy presented with photogrammetry surface scanning method allows sufficient detail to present individual vessel's course and even small perforating arteries in photorealistic 3D models. These features, including VR visualization, provide new teaching prospects. The whole study was done with simplified algorithms and free or open-source software platforms allowing creation of 3D databases especially useful in cases with limited body donor-based dissection training availability.

Photogrammetry is a useful tool to assess the aesthetic outcome after excision and reconstruction of the nose skin tumors.

BACKGROUNDOBJECTIVE: Post-oncological nasal reconstruction presents both aesthetic and functional challenges. While established methods exist for quantitatively evaluating functional results following surgery, equivalent systems for assessing aesthetic outcomes are lacking. Three-dimensional (3D) photogrammetry, already used in maxillofacial and orthodontic surgery for aesthetic evaluation, overcomes some limitations of traditional methods like direct anthropometry. However, its applicability in oncological facial reconstruction has not yet been explored. In our study, we applied the 3dMDtrio™ system for the quantitative analysis of line and surface modifications following nasal reconstruction. METHODS: We conducted a prospective observational study enrolling patients with skin neoplasms located on the nose undergoing surgical excision and reconstruction. Using the 3dMDtrio™ system, we measured the dimensions and projections of nasal surfaces and the positions of specific landmarks before and after surgery. The surface measurements were then correlated with aesthetic evaluations performed by three plastic surgeons, not involved in the procedure, using a 5-point Likert scale. RESULTS: We included 33 patients with a mean age of 71 years, ranging from 40 to 94. We obtained complete documentation of all postoperative measurements for 21 patients. We observed significant changes in the positions of the landmarks post-surgery, limited to the right ala and nasion. The average nasal surface area was 4674.41 mm2 ± 477.24 mm2 before surgery and 4667.95 mm2 ± 474.12 mm2 after surgery, with no significant discrepancies. The evaluation using the Likert scale revealed an average score of 3.04 ± 0.48, with a significant negative correlation to the measured surface changes. CONCLUSION: Our findings suggest that 3D photogrammetry can be considered a valid method for objectively assessing volumetric changes associated with post-oncological nasal reconstructive surgery.

Three-dimensional Assessment of Longitudinal Surgical Outcome in Patients with Unilateral Cleft Lip and Palate: A Modified Rotation Advancement Technique.

BACKGROUND: Optimization of a modified rotation advancement technique is hampered by lack of objective measures to quantify the longitudinal surgical outcome. METHODS: We collected and assessed facial 3D images of 115 consecutive patients who underwent primary repair between 2017 and 2019. Photogrammetry was performed preoperatively, immediately postoperatively and at a first and second follow-up interval, occurring at an average year of 0.6 and 5.3 years, respectively. 10 additional age-matched noncleft control subjects were also included. RESULTS: Growth lag in cleft side lateral lip and gradual elongation of medial lip height on the cleft side caused continuous deviation of philtrum towards the cleft side. The columellar length on the cleft side continued to grow slower, accompanied by a persistent widening of alar base width on the cleft side, leading to in the gradual deviation of columella towards the cleft side. The pre-operative and post-operative nasolabial asymmetry would increase with greater degree of postoperative deficiencies. Right clefts presented with greater degrees of deficiencies in lateral lip height in preoperative measurement, but this discrepancy of the laterality of clefts was not observed in the two follow-up periods. CONCLUSION: The surgical outcome of this modified rotational advancement technique in unilateral cleft lip primary repair is promising. Growth lag in lateral lip and lateral displacement of alar base cause continuous deviation of philtrum towards the cleft side. Pre-operative severity does predict post-operative outcomes. Laterality of oral clefts does not significantly affect the long-term outcomes of surgery. PRACTICAL IMPLICATION: This surgical technique meets the current trend of cleft lip and palate primary repair and is worth promoting.

Predicting 3D and 2D surface area of corals from simple field measurements.

The structural architecture of coral reefs is a known predictor of species richness, fish biomass and reef resilience. At a smaller scale, three-dimensional (3D) surface area of corals is a fundamental determinant of physical and biological processes. Quantifying the 3D surface area of corals has applications for a broad range of scientific disciplines, including carbonate production estimates, coral predation studies, and assessments of reef growth. Here, we present morphotaxon-specific conversion metrics to estimate total 3D surface area and projected 2D surface area of individual colonies from simple field measurements of colony maximum diameter. Underwater photogrammetry techniques were used to quantify surface area and estimate conversion metrics. Bayesian models showed strong non-linear (power) relationships between colony maximum diameter and both total 3D surface area and projected 2D surface area for 13 out of 15 morphotaxa. This study presents a highly resolved and efficient method for obtaining critical surface area assessments of corals for various applications, including assessments of biotic surface area, tissue biomass, calcification rates, coral demographic rates, and reef restoration monitoring.

Neuroanatomical photogrammetric models using smartphones: a comparison of apps.

OBJECTIVES: A deep knowledge of the surgical anatomy of the target area is mandatory for a successful operative procedure. For this purpose, over the years, many teaching and learning methods have been described, from the most ancient cadaveric dissection to the most recent virtual reality, each with their respective pros and cons. Photogrammetry, an emergent technique, allows for the creation of three-dimensional (3D) models and reconstructions. Thanks to the spreading of photogrammetry nowadays it is possible to generate these models using professional software or even smartphone apps. This study aims to compare the neuroanatomical photogrammetric models generated by the two most utilized smartphone applications in this domain, Metascan and 3D-Scanner, through quantitative analysis. METHODS: Two human head specimens (four sides) were examined. Anatomical dissection was segmented into five stages to systematically expose well-defined structures. After each stage, a photogrammetric model was generated using two prominent smartphone applications. These models were then subjected to both quantitative and qualitative analysis, with a specific focus on comparing the mesh density as a measure of model resolution and accuracy. Appropriate consent was obtained for the publication of the cadaver's image. RESULTS: The quantitative analysis revealed that the models generated by Metascan app consistently demonstrated superior mesh density compared to those from 3D-Scanner, indicating a higher level of detail and potential for precise anatomical representation. CONCLUSION: Enabling depth perception, capturing high-quality images, offering flexibility in viewpoints: photogrammetry provides researchers with unprecedented opportunities to explore and understand the intricate and magnificent structure of the brain. However, it is of paramount importance to develop and apply rigorous quality control systems to ensure data integrity and reliability of findings in neurological research. This study has demonstrated the superiority of Metascan in processing photogrammetric models for neuroanatomical studies.

A new method to orient a 3-dimensional facial model to natural head position: A preliminary report on accuracy and reproducibility.

OBJECTIVES: To establish and validate a novel method to orient a 3-dimensional (3D) facial model to natural head position (NHP) in a stereophotogrammetric system using a 2-dimensional frontal full-face photograph of NHP. MATERIAL AND METHODS: Specific technique procedure was reported for our method, and in vitro model experiment was performed for accuracy test. A preliminary volunteer study was then planned for reproducibility test. RESULTS: The accuracy on a 3D-printed test model was within 0.15°. Within an observational cohort of 22 dental students, the angular deviations of different maxillofacial regions (e.g., central forehead, left and right zygomatic regions, apex of nose and mental region) were no more than 2° between the 3D NHP models acquired with a shorter time-interval (1 h from baseline) or a longer time-interval (7 days from baseline), which were all considered clinically insignificant. In addition, the angular deviations were significantly larger with a 7d-interval than with a 1h-interval, indicting a decline in 3D NHP reproducibility over short time duration. CONCLUSION: The current method may represent a clinically useful protocol for recording and transferring 3D NHP in stereophotogrammetry. CLINICAL RELEVANCE: It may provide reliable and meaningful reference information for evaluating craniofacial morphology, and be of clinical use in the diagnosis, treatment and follow-ups of patients with aesthetic or deformed craniofacial problems.

Precise Positioning in Nitrogen Fertility Sensing in Maize (Zea mays L.).

This study documented the contribution of precise positioning involving a global navigation satellite system (GNSS) and a real-time kinematic (RTK) system in unmanned aerial vehicle (UAV) photogrammetry, particularly for establishing the coordinate data of ground control points (GCPs). Without augmentation, GNSS positioning solutions are inaccurate and pose a high degree of uncertainty if such data are used in UAV data processing for mapping. The evaluation included a comparative assessment of sample coordinates involving RTK and an ordinary GPS device and the application of precise GCP data for UAV photogrammetry in field crop research, monitoring nitrogen deficiency stress in maize. This study confirmed the superior performance of the RTK system in providing positional data, with 4 cm bias as compared to 311 cm with the non-augmented GNSS technique, making it suitable for use in agronomic research involving row crops. Precise GCP data in this study allow the UAV-based Normalized Difference Red-Edge Index (NDRE) data to effectively characterize maize crop responses to N nutrition during the growing season, with detailed analyses revealing the causal relationship in that a compromised optimum canopy chlorophyll content under limiting nitrogen environment was the reason for reduced canopy cover under an N-deficiency environment. Without RTK-based GCPs, different and, to some degree, misleading results were evident, and therefore, this study warrants the requirement of precise GCP data for scientific research investigations attempting to use UAV photogrammetry for agronomic field crop study.

Virtual reconstruction of stone tool refittings by using 3D modelling and the Blender Engine: The application of the "ReViBE" protocol to the archaeological record.

Visual representation of material culture plays a crucial role in prehistoric archaeology, from academic research to public outreach and communication. Scientific illustration is a valuable tool for visualising lithic artefacts and refittings, where technical attributes must be drawn to enhance our understanding of their significance. However, the representation of lithic refittings, which involve dynamic and sequential transformations of a volume, requires an alternative approach to traditional two-dimensional models such as photography or illustration. Advances in imaging technologies have improved our ability to capture and communicate the multifaceted nature of archaeological artefacts. In this context, we present the ReViBE protocol (Refitting Visualisation using Blender Engine), which integrates photogrammetry, 3D modelling and the animation software Blender© for the virtual representation of lithic refittings. This protocol allows the sequential study of core reduction phases and their associated flakes, as well as other aspects related to knapping decision making (core rotations, surface modifications, and direction and position of impact points). Thus, this method allows the visualisation of techno-cognitive aspects involved in core reduction through a step-by-step animation process. In addition, the 3D models and virtual reconstructions generated by ReViBE can be accessed through open repositories, in line with the principles of open science and FAIR (Findable, Accessible, Interoperable, and Reusable) data. This accessibility ensures that data on lithic technology and human behaviour are widely available, promoting transparency and knowledge sharing, and enabling remote lithic analysis. This in turn breaks down geographical barriers and encourages scientific collaboration.

Applying 3D Models of Giant Salamanders to Explore Form-Function Relationships in Early Digit-Bearing Tetrapods.

Extant salamanders are used as modern analogs of early digit-bearing tetrapods due to general similarities in morphology and ecology, but the study species have been primarily terrestrial and relatively smaller when the earliest digit-bearing tetrapods were aquatic and an order of magnitude larger. Thus, we created a 3D computational model of underwater walking in extant Japanese giant salamanders (Andrias japonicus) using 3D photogrammetry and open-access graphics software (Blender) to broaden the range of testable hypotheses about the incipient stages of terrestrial locomotion. Our 3D model and software protocol represent the initial stages of an open-access pipeline that could serve as a "one-stop-shop" for studying locomotor function, from creating 3D models to analyzing the mechanics of locomotor gaits. While other pipelines generally require multiple software programs to accomplish the different steps in creating and analyzing computational models of locomotion, our protocol is built entirely within Blender and fully customizable with its Python scripting so users can devote more time to creating and analyzing models instead of navigating the learning curves of several software programs. The main value of our approach is that key kinematic variables (e.g. speed, stride length, and elbow flexion) can be easily altered on the 3D model, allowing scientists to test hypotheses about locomotor function and conduct manipulative experiments (e.g. lengthening bones) that are difficult to perform in vivo. The accurate 3D meshes (and animations) generated through photogrammetry also provide exciting opportunities to expand the abundance and diversity of 3D digital animals available for researchers, educators, artists, conservation biologists, etc. to maximize societal impacts.

Impact of Standing and Sitting Postures on Spinal Curvature and Muscle Mechanical Properties in Young Women: A Photogrammetric and MyotonPro Analysis.

BACKGROUND This study aimed to evaluate the effect of standing and sitting positions on spinal curvatures evaluated using projection moire and muscle tone and stiffness using the MyotonPRO hand-held device in young women. MATERIAL AND METHODS Thirty-three healthy women, aged 21 to 23 years, volunteered in the study. We used the projection moire method to examine spinal curvatures in both positions and the MyotonPRO device to measure the tone and stiffness of muscles in 3 regions. We evaluated the effects of positions (standing vs sitting), regions (cervical, thoracic, and lumbar), and side factor (right vs left) using multivariate analysis. RESULTS The sitting position significantly decreased the lumbosacral and thoracolumbar angles (P<0.001), but had no effect on the superior thoracic angle. Muscle tension and stiffness were the highest (P<0.001) in the cervical region and did not differ between positions (P>0.05) in this region. We found significantly higher muscle tone and stiffness in the thoracic and lumbar regions during sitting than during standing (P<0.001). There was symmetry in the muscle tone and the stiffness between the right and left sides of the spine. CONCLUSIONS The sitting posture decreased lumbosacral and thoracolumbar angles but increased muscle tension and stiffness in the lumbar and thoracic regions only. The symmetry of muscle tone and transverse stiffness in both positions was the normative value. This study provides insight into the adaptive physiological changes in spinal curvature and muscle mechanical properties in young women and serves as an important reference point for clinical studies of women.

Quantitative Assessment of Lip Morphology in Patients With and Without Cleft Lip and Palate Using 3-Dimensional Stereophotogrammetry.

This study aimed to assess and quantify the morphologic characteristics of the lips and the lower third of the face in cleft and noncleft patients, utilizing three-dimensional (3D) stereophotogrammetry. Sixty patients were included in the study, comprising 30 unilateral cleft lip and palate patients (G1, 24 female, 6 male; aged 20 to 60 y, mean age 44.0±12.0 y) and 30 noncleft patients (G2, 23 female, 7 male; aged 20 to 59 y, mean age 43.5±12.0 y). Anthropometric landmarks were identified on the facial surface. Three-dimensional stereophotogrammetry was employed to capture images. Statistical analysis was conducted to compare the groups, with a significance level set at 0.05. The comparative analysis revealed statistically significant differences in 5 linear and 6 angular measurements. Linear measurements such as philtrum width, upper and lower cutaneous lip height, mandibular ramus length, and midfacial depth exhibited significant differences between cleft and noncleft patients. Similarly, angular measurements, including upper lip angle, Cupid's bow angle, lower/medium face convexity, lip seal, nasolabial angle, and left gonial angle, displayed statistically significant disparities. These findings underscore the ongoing surgical challenges in the comprehensive rehabilitation of patients with clefts, highlighting the critical need for continued advancements in treatment strategies.

Two-dimensional facial photography for assessment of craniofacial morphology in sleep breathing disorders: a systematic review.

PURPOSE: Craniofacial morphology is integral to Sleep Breathing Disorders (SBD), particularly Obstructive Sleep Apnea (OSA), informing treatment strategies. This review assesses the utility of two-dimensional (2D) photogrammetry in evaluating these metrics among OSA patients. METHODS: Following PRISMA guidelines, a systematic review was conducted. PubMed, Embase, and Lilacs databases were systematically searched for studies utilizing 2D photography in SBD. Findings were narratively synthesized. RESULTS: Thirteen studies involving 2,328 patients were included. Significant correlations were found between craniofacial measurements-specifically neck parameters and facial width-and OSA severity, even after BMI adjustment. Ethnic disparities in craniofacial morphology were observed, with photogrammetry effective in predicting OSA in Caucasians and Asians, though data for other ethnicities were limited. Pediatric studies suggest the potential of craniofacial measurements as predictors of childhood OSA, with certain caveats. CONCLUSION: 2D photogrammetry emerges as a practical and non-invasive tool correlating with OSA severity across diverse populations. However, further validation in various ethnic cohorts is essential to enhance the generalizability of these findings.

Accuracy of traditional open-tray impression, stereophotogrammetry, and intraoral scanning with prefabricated aids for implant-supported complete arch prostheses with different implant distributions: An in vitro study.

STATEMENT OF PROBLEM: Conventional impression techniques for complete arch implant-supported fixed dental prostheses (CIFDPs) are technique sensitive. Stereophotogrammetry (SPG) and intraoral scanning (IOS) may offer alternatives to conventional impression making. PURPOSE: The purpose of this in vitro study was to assess the accuracy and passive fit of IOS with prefabricated aids, SPG, and open tray impression (OI) for CIFDPs with different implant distributions. MATERIAL AND METHODS: Three definitive casts with 4 parallel implants (4-PARA), 4 inclined implants (4-INCL), and 6 parallel implants (6-PARA) were fabricated. Three recording techniques were tested: IOS with prefabricated aids, SPG, and OI. The best and the worst scans were selected to fabricate 18 milled aluminum alloy frameworks. The trueness and precision of distance deviation (∆td and ∆pd), angular deviation (∆tθand ∆pθ), root mean square errors (∆tRMS for ∆pRMS), and passive fit score of frameworks were recorded. Two-way ANOVA was applied. RESULTS: SPG showed the best trueness and precision (95%CI of ∆td/∆tθ/∆tRMS, 31 to 39 µm, 0.22 to 0.28 degrees, 20 to 23 µm; 95%CI of ∆pd/∆pθ/∆pRMS, 9 to 11 µm, 0.06 to 0.08 degrees, 8 to 10 µm), followed by OI (61 to 83 µm, 0.33 to 0.48 degrees, 28 to 48 µm; 66 to 81 µm, 0.29 to 0.38 degrees, 32 to 41 µm) and IOS (143 to 193 µm, 0.37 to 0.50 degrees, 81 to 96 µm; 89 to 111 µm, 0.27 to 0.31 degrees, 51 to 62 µm). Tilted implants were associated with increased distance deviation. Increased implant number was associated with improved recording precision. The passive fit of frameworks was negatively correlated with the RMS error, and the correlation coefficient was -0.65 (P=.003). CONCLUSIONS: SPG had the best accuracy. Implant distributions affected implant precision. The RMS error can be used to evaluate the passive fit of frameworks.

Experimental Comparison between 4D Stereophotogrammetry and Inertial Measurement Unit Systems for Gait Spatiotemporal Parameters and Joint Kinematics.

(1) Background: Traditional gait assessment methods have limitations like time-consuming procedures, the requirement of skilled personnel, soft tissue artifacts, and high costs. Various 3D time scanning techniques are emerging to overcome these issues. This study compares a 3D temporal scanning system (Move4D) with an inertial motion capture system (Xsens) to evaluate their reliability and accuracy in assessing gait spatiotemporal parameters and joint kinematics. (2) Methods: This study included 13 healthy people and one hemiplegic patient, and it examined stance time, swing time, cycle time, and stride length. Statistical analysis included paired samples t-test, Bland-Altman plot, and the intraclass correlation coefficient (ICC). (3) Results: A high degree of agreement and no significant difference (p > 0.05) between the two measurement systems have been found for stance time, swing time, and cycle time. Evaluation of stride length shows a significant difference (p < 0.05) between Xsens and Move4D. The highest root-mean-square error (RMSE) was found in hip flexion/extension (RMSE = 10.99°); (4) Conclusions: The present work demonstrated that the system Move4D can estimate gait spatiotemporal parameters (gait phases duration and cycle time) and joint angles with reliability and accuracy comparable to Xsens. This study allows further innovative research using 4D (3D over time) scanning for quantitative gait assessment in clinical practice.

[Research progress on accuracy of intraoral digital impressions for implant-supported prostheses in edentulous jaw]. / æ— ç‰™é¢Œç§æ¤ä¿®å¤æ‚£è€ åº”ç”¨å£å† æ•°å­—åŒ–å°æ¨¡å‡†ç¡®æ€§ç ”ç©¶è¿›å±•.

With the rapid development of implant techniques and digital technology, intraoral digital impressions have become a commonly used impression method in implant restoration. At present, the accuracy of intraoral digital impressions directly applied to implant-supported prostheses in edentulous jaw remains inadequate. This is due to the high accuracy requirement of full-arch implant impressions, while there are still technical challenges in intraoral digital impressions about recognition and stitching. In this regard, scholars have proposed a variety of scanning strategies to improve the accuracy of intraoral scans, including mucosal modifications, auxiliary devices and novel scan bodies. At the same time, as a new digital impression technique, stereo photogrammetry has been developing steadily and exhibits promising accuracy. This article reviews the research progress on the accuracy of edentulous full-arch implant impressions and techniques which can improve the accuracy of intraoral digital impressions thus providing a reference for clinical application.

Photogrammetry scans for neuroanatomy education - a new multi-camera system: technical note.

Photogrammetry scans has directed attention to the development of advanced camera systems to improve the creation of three-dimensional (3D) models, especially for educational and medical-related purposes. This could be a potential cost-effective method for neuroanatomy education, especially when access to laboratory-based learning is limited. The aim of this study was to describe a new photogrammetry system based on a 5 Digital Single-Lens Reflex (DSLR) cameras setup to optimize accuracy of neuroanatomical 3D models. One formalin-fixed brain and specimen and one dry skull were used for dissections and scanning using the photogrammetry technique. After each dissection, the specimens were placed inside a new MedCreator® scanner (MedReality, Thyng, Chicago, IL) to be scanned with the final 3D model being displayed on SketchFab® (Epic, Cary, NC) and MedReality® platforms. The scanner consisted of 5 cameras arranged vertically facing the specimen, which was positioned on a platform in the center of the scanner. The new multi-camera system contains automated software packages, which allowed for quick rendering and creation of a high-quality 3D models. Following uploading the 3D models to the SketchFab® and MedReality® platforms for display, the models can be freely manipulated in various angles and magnifications in any devices free of charge for users. Therefore, photogrammetry scans with this new multi-camera system have the potential to enhance the accuracy and resolution of the 3D models, along with shortening creation time of the models. This system can serve as an important tool to optimize neuroanatomy education and ultimately, improve patient outcomes.

Three-Dimensional Anthropometric Facial Analysis and Fitting Discrepancies Between Stereophotogrammetry and CT.

BACKGROUND: The reliability and repeatability of stereophotogrammetry and CT in 3-dimensional anthropometric facial analysis were investigated in this study, which also explored the clinical application of supine CT. METHOD: In this study, 3D CT and 3dMD stereophotogrammetry were used on 20 healthy volunteers. The fitting distance between stereophotogrammetry and CT scans at landmark points was measured, along with facial feature measurements (Al-Al) face width (Go-Go, Zy-Zy, Ex-Ex), and hemi-face height (Sn-Gn). The intraclass correlation coefficient (ICC) was employed to assess interrater agreement and to verify the reliability of the measurement methods. Paired t -analysis was utilized for analyzing intramethod displacement. RESULTS: The alare, nasion, and pronasale points were found to be minimally influenced by different positions and are more recommended as landmark points for registration. CT demonstrated good interrater reliability on all indicators. In stereophotogrammetry, measurements for Go-Go and Zy-Zy displayed an interclass correlation coefficient (ICC) of less than 0.75. Significant differences between the 2 methods were observed for En-En, Ex-Ex, and Go-Go ( P < 0.05). Specifically, CT analysis for Go-Go showed a measurement 2.34 mm larger than that obtained with the 3dMD method. CONCLUSION: Both CT and stereophotogrammetry were found to be reliable methods for evaluating facial soft tissue. It is speculated that Go-Go measurement is primarily influenced by factors such as different positions, facial expressions, and gravity. These variables should be carefully considered during the evaluation of the mandibular angle region.

Nasal Morphology in a Young Adult Middle-Eastern Population: A Stereophotogrammetric Analysis.

AIM: This study aimed to describe gender-specific three-dimensional morphology of the soft-tissue nose in Lebanese young adults and to explore the associations between nasal morphology with age and body mass index (BMI). MATERIALS AND METHODS: Three-dimensional photographs were captured for 176 young healthy Lebanese adults (75 males and 101 females) aged 18.1-37.68 years. Linear and angular nasal measurements were computed and compared between genders, in addition to other established norms. Associations with age and BMI were also assessed. RESULTS: All linear measurements were greater in males than in females, and only the nasolabial angle was significantly larger in females by 2.97 degrees on average. Most of the measurements were found to be larger than the Caucasian norms. A few significant correlations were found between the measurements and age or BMI. CONCLUSION: This study is the first to present the sex-specific norms for nasal morphology in the Lebanese population and highlights the presence of gender dimorphism in the majority of measurements. Additional studies are needed to validate our data and expand the associations with age and BMI. CLINICAL SIGNIFICANCE: The data offered in this study could help enhance the accuracy of facial reconstructive surgery and aid in personalized treatment planning for both medical and cosmetic nasal interventions. How to cite this article: Saadeh M, Shamseddine L, Fayyad-Kazan H, et al. Nasal Morphology in a Young Adult Middle-Eastern Population: A Stereophotogrammetric Analysis. J Contemp Dent Pract 2024;25(3):199-206.