Measuring Phosphoglycolate Phosphatase Activity Using NMR Detection of Glycolate.

Besides the historical and traditional use of nuclear magnetic resonance (NMR) spectroscopy as a structure elucidation tool for proteins and metabolites, its quantification ability allows the determination of metabolite amounts and therefore enzymatic activity measurements. For this purpose, 1H-NMR with adapted water pulse pre-saturation sequences and calibration curves with commercial standard solutions can be used to quantify the photorespiratory cycle intermediates, 2-phosphoglycolate and glycolate, associated with the phosphoglycolate phosphatase reaction. The intensity of the 1H-NMR signal of glycolate produced by the activity of purified recombinant Arabidopsis thaliana PGLP1 can therefore be used to determine PGLP1 enzymatic activities and kinetic parameters.

High performance poly(L-lactic acid)-based film by one-step synthesis of poly (L-lactic acid-co-butylene itaconate-co-glycolic acid) for efficient preservation of yogurt storage.

Biodegradable poly(L-lactic acid) (PLLA) has seldom used for dairy packaging due to medium permeability and brittleness. Novel PLLA copolymers, poly (L-lactic acid-co-butylene itaconate-co-glycolic acid) (PLBIGA), were developed by integrating glycolic acid (GA) and poly(butylene itaconate) (PBI) into PLLA's structure using low molecular weight PLLA as a key initiator. Then, packaging materials with better barrier and mechanical properties were obtained by blended PLBIGA with PLLA. Both PLLA/PLBIGA films and polyethylene nylon composite film (PE/NY) were used for stirred yogurt packaging and storage at 4 °C for 25 days. Results revealed that yogurt packed by PLLA/PLBIGA films maintained stabler water-holding capacity, color, and viscosity over the storage period. Moreover, the integrity of the gel structure and the total viable count of lactic acid bacteria in yogurt packaged in PLLA/40-PLBIGA8 were also found to be superior to those in PE/NY packages, highlighting its eco-friendly advantages in dairy packaging.

Radiation stability of two extraction chromatography resin materials containing substituted diglycolamide ligands in an ionic liquid.

The radiation stability of two extraction chromatography resins containing diglycolamide ligands viz. TPDGA (N,N,N',N'-tetra-n-pentyl diglycolamide) and TODGA (N,N,N',N'-tetra-n-octyl diglycolamide) in a room temperature ionic liquid (C4mim.NTf2) was studied by exposing to gamma rays from a 60Co source. The resins were irradiated to varying gamma ray dose up to 1000 kGy where both the dry resins and wet resins (containing a fixed amount nitric acid in contact) were used. The performance assessment of the resins was done by physicochemical characterization as well as uptake studies; both by batch as well as column methods. The physicochemical characterization of the resins was done using FTIR analysis while the surface morphology of the resins was carried out by scanning electron microscopy. The uptake of the metal ions, typically that of Am(III) and Eu(III), representing the trivalent actinides and lanthanides was studied by batch method. The dry resins and those in contact with nitric acid yielded nearly identical results suggesting minimal effect of the radiolytic products of nitric acid on the resin performance. There was negligible change in the Kd values up to an absorbed dose of 300 kGy beyond which there was sharp decrease. However, the Kd values were still quite large even after an absorbed dose of 1000 kGy. The column performance of the irradiated resins was also assessed by the uptake and elution of Eu(III) ion and though loading was affected, the elution behavior was found to have insignificant effect.

Highly efficient uptake of Europium (III) and Americium (III) from acidic feeds using extraction chromatography resins containing N,N,N',N'-tetra alkyl diglycolamides with varying alkyl chain length in an ionic liquid.

A comparative study on the uptake of Eu(III) and Am(III) was carried out using four extraction chromatography (XC) resins impregnated with constant weight of the tetra-n-pentyl diglycolamide (TPDGA) ligands, viz. tetra-n-hexyl diglycolamide (THDGA), tetra-n-octyl diglycolamide (TODGA) and tetra-n-decyl diglycolamide (TDDGA) along with C4mim·NTf2, a room temperature ionic liquid (RTIL), from nitric acid feed solutions. The uptake of Eu(III) was higher than that of Am(III) while the uptake trend with the four XC resins followed the order: TPDGA > THDGA > TODGA > TDDGA, which was opposite to the alkyl chain length attached to the DGA extractant. When constant moles of the extractants were used, the observed trend was TODGA > THDGA > TDDGA > TPDGA. Also, for all the four XC resins, the uptake of both Eu(III) and Am(III) ions increased with increasing nitric acid concentration. The uptake data with all the four resins were fitted into different kinetic and isotherm models which conformed to a pseudo-second order kinetics and Langmuir monolayer sorption isotherm. Furthermore, columns were prepared with these XC resins and were used to obtain breakthrough profiles using a feed solution containing 0.55 g/L Eu(III) in 3 M HNO3. Subsequently, the elution of the loaded metal ion from the column was accomplished with a strippant solution containing 1 M guanidine carbonate + 0.05 M EDTA in distilled water. Elution profiles for all the four resins showed sharp peaks with almost no tailing.

Developmental toxicity studies on triclopyr acid, triclopyr butoxyethyl ester and triclopyr triethylamine salt in the rabbit.

Developmental toxicity studies have been conducted in the rabbit on triclopyr acid and its active-ingredient variants, triclopyr triethylamine salt (T-TEA) and triclopyr butoxyethyl ester (T-BEE), which are dissociated or hydrolysed in vivo to triclopyr acid. In this paper, the available developmental toxicity studies on triclopyr acid, T-TEA and T-BEE are summarised and evaluated. For triclopyr acid and T-TEA, there was no evidence of impaired reproductive performance, fetotoxicity, or teratogenicity, even at maternally toxic doses. The no-observed-adverse-effect levels (NOAELs) for developmental toxicity were 75 mg/kg bw per day for triclopyr acid and 100 mg/kg bw per day for T-TEA, equivalent to 72 mg/kg bw per day expressed as triclopyr acid. A study on T-BEE showed increased post-implantation loss and slight increases in skeletal anomalies and variants at the highest dose tested of 100 mg/kg bw per day, a maternally toxic dose. In a follow-up study on T-BEE, focusing on post-implantation loss, no general increase in post-implantation loss was observed, but one animal at 100 mg/kg bw per day with maternal toxicity had complete resorption of implants. The NOAEL for post-implantation loss was 60 mg/kg bw per day, equivalent to 44 mg/kg bw per day expressed as triclopyr acid. It cannot be excluded that T-BEE may be associated with increased post-implantation loss, but it was only seen in association with maternal toxicity. It is concluded that triclopyr acid and its variants are not specifically toxic to the rabbit embryo and fetus, since post-implantation loss only occurred at doses causing maternal toxicity.

Skin-friendly corrugated multilayer microspherical sensor fabricated with silk fibroin, poly (lactic-co-glycolic acid), polyaniline, and kappa-carrageenan for wide range pressure detection.

To enlarge the linear detection range without sacrificing the sensitivity is one of the urgent problems in the development of high-performance piezoresistive flexible sensors. Inspired by a multilayer corrugated board, this study develops a new multilayer microspherical sensor in which conductive core-shell SiO2/Polyaniline (PANI) (PS) microspheres serve as active particles, while insulated silk fibroin (SF)/poly lactic-co-glycolic acid (PLGA) (SP) fibers are used as the support. The size of conductive microspheres attached to the insulated layer is controllable. The multiple layers of assembly endow the flexible sensor with a high sensitivity (0.071 kPa-1) and a wide linear detection (from 10 Pa to 380 kPa) simultaneously. This corrugated sensor also have a fast response time (145 ms) and an excellent durability (over 2000 cycles), and it can be used to detect human joint pressure signals and transmit encrypted information. Moreover, flexible keyboard, safety protection of machinery, as well as object position tracking can be achieved based on this sensor. Most importantly, the sensor encapsulated by biological polysaccharide kappa-carrageenan (KC) is skin-friendly and breathable, and it can be decomposed in 90 °C hot water. In conclusion, this multilayer microspherical sensor presents great potential for flexible wearable devices.

Molecular structure, interactions, and antimicrobial properties of curcumin-PLGA Complexes-a DFT study.

Density functional calculations are performed to study the molecular structure, interactions, and antimicrobial activity of curcumin-poly lacto glycolic acid (Cur-PLGA) complexes. The calculations are performed on curcumin (Cur), glycolic acid (SSC and AAT conformers), lactic acid (LA), Cur-SSC, Cur-AAT, Cur-LA, and Cur-PLGA complexes using dispersion corrected M06-2X functional with 6-31 + G* basis set. The condensed Fukui functions of Cur are calculated to identify the favorable reactive sites. Inter- and intramolecular H-bond interactions are analyzed in detail through natural bond orbital, Atoms in Molecule, and Reduced density gradient analyses. The interaction energy values indicate that the interaction between Cur and AAT is stronger than the other studied complexes. Further, our calculations show that the PLGA interacted with Cur is having lower LUMO energy and density values. This indicates that the antimicrobial activity is high in this complex.

Influence of lactide vs glycolide composition of poly (lactic-co-glycolic acid) polymers on encapsulation of hydrophobic molecules: molecular dynamics and formulation studies.

The work demonstrates the preparation of PLGA (PLGA 50:50, PLGA 75:25) nanoparticles, to encapsulate a hydrophobic molecule (coumarin-6), using the microreactor-based continuous process. The formulations were characterized using dynamic light scattering and transmission electron microscopy to determine their size, homogeneity, zeta potential, and surface morphology. The resulting nanoparticles were safe to the CHO cells (≈80% cell survival), at the concentration of ≤600 µg/mL and were successfully taken up by the cells, as demonstrated using confocal microscopy. Moreover, imaging flow cytometry confirmed that the nanoparticles were internalized in 73.96% of the cells. Furthermore, molecular dynamics simulation and docking studies were carried out to explore the effect of polymer chain length of PLGA and lactide vs glycolide (LA:GA) ratio on their compatibility with the coumarin-6 molecules and to study the coiling and flexibility of PLGA in the presence of coumarin-6 molecules. Flory-Huggins interaction parameter (χ) was calculated for polymer chains of varying lengths and LA:GA ratio, with respect to coumarin-6. χ parameter increased with increase in polymer chain length, which indicated superior interaction of coumarin-6 with the smaller chains. Amongst all the polymeric systems, PLGA55 exhibited the strongest interaction with coumarin-6, for all the chain lengths, possibly because of their homogeneous spatial arrangements and superior binding energy. PLGA27 showed better compatibility compared to PLGA72 and PGA, whereas PLA-based polymers exhibited the least compatibility. Analysis of the radius of gyration of the polymer chains in the polymer-coumarin-6 complexes, at the end of molecular dynamics run, exhibited that the polymer chains displayed varying coiling behavior and flexibility, depending upon the relative concentrations of the polymer and coumarin-6. Factors like intra-chain interactions, spatial arrangement, inter-chain binding energies, and polymer-coumarin-6 compatibility also influenced the coiling and flexibility of polymer chains.

Theoretical Study of Retinol, Niacinamide and Glycolic Acid with Halloysite Clay Mineral as Active Ingredients for Topical Skin Care Formulations.

The adsorption of retinol, niacinamide and glycolic acid active ingredients on the internal surface of halloysite in an aqueous environment was explored at the molecular level by means of calculations based on quantum mechanics and force fields from empirical interatomic potentials. These active ingredients are stably adsorbed on the internal surface of halloysite forming hydrogen bonds between the hydrogen, oxygen and nitrogen atoms with the hydroxyl groups of the inner surface of the halloysite. In addition, electrostatic interaction between these active ingredients with the water molecules was observed. Therefore, the theoretical results indicate that the adsorption of these active principles is favourable in the halloysite nanotube, which allows directing future experimental investigations for the development and design of retinol, niacinamide and glycolic acid with halloysite nanotubes systems, which may be topical formulations for skincare.

Chitosan coated nanoparticles for efficient delivery of bevacizumab in the posterior ocular tissues via subconjunctival administration.

In several ocular diseases, vascular endothelial growth factor (VEGF) level has been found to be unregulated. Bevacizumab, an anti-VEGF drug, is the most commonly used off level drug for diabetic retinopathy (DR). The present study was to evaluate the chitosan-coated poly (lactide-co-glycolic acid) nanoparticles (CS-PLGA NPs) for sustained and effective delivery of bevacizumab to posterior ocular tissues. The penetration of NP through sclera was studied by confocal laser scanning microscopy (CLSM). For pharmacokinetic study, bevacizumab loaded NPs were administered into the rat eye through subconjunctival injection (SCJ) and pharmacokinetic parameters were compared to drug solution. CLSM and pharmacokinetic study showed better penetration of formulation and higher concentration of bevacizumab in posterior ocular tissues. In retinopathy model, CS-PLGA NPs by SCJ route showed more reduction of VEGF level in retina than the topical and intravitreal administration of formulation. Thus, CS-coated PLGA NPs can be potentially useful as carriers to target retina.

Design, synthesis and biological evaluation of glycolamide, glycinamide, and ß-amino carbonyl 1,2,4-triazole derivatives as DPP-4 inhibitors.

Through modification of the skeleton of Sitagliptin and Vildagliptin, we successfully synthesized and built-up four series of 1,2,4-triazole derivatives, containing N,O-disubstituted glycolamide, N,N'-disubstituted glycinamide, ß-amino ester, and ß-amino amide as linkers, for the development of new dipeptidyl peptidase 4 (DPP-4) inhibitors. The synthetic strategy for glycolamides or glycinamides involved convenient two-steps reaction: functionalized transformation of 2-chloro-N-(2,4,5-triflurophenyl)acetamide 9 (hydroxylation or amination) and esterification or amidation of 1,2,4-triazole-3-carboxylic acid. On the other hand, the one-pot synthesis procedure, including substitution and deprotection, was developed for the preparation of ß-amino carbonyl 1,2,4-triazoles from (1H-1,2,4-triazol-3-yl)methanol 12 or (1H-1,2,4-triazol-3-yl)methanamine 13 and Boc-(R)-3-amino-4-(2,4,5-trifluoro-phenyl)-butyric acid 14. All of glycolamides, glycinamides, and ß-amino carbonyl 1,2,4-triazoles were also evaluated against DPP-4 inhibitory activity. Based on the SAR study of DPP-4 inhibitory capacity, ß-amino ester 5n and ß-amino amide 1,2,4-triazoles 6d and 6p possessed the significant inhibition of DPP-4 (IC50 < 51.0 nM), particularly for compound 6d (IC50 = 34.4 nM). The selectivity evaluation indicated compound 5n and 6p had excellent selectivity over QPP, DPP-8, and DPP-9. In addition, the docking results revealed compounds 5n and 6p provided stronger π-π stacking interaction with residue Phe357 than 1,5-disubstituted 1,2,4-triazole 6d and Sitagliptin 1. In summary, compounds 5n and 6p could be promising lead compounds for further development of DPP-4 inhibitor.

Covalent Inactivation of Mycobacterium tuberculosis Isocitrate Lyase by cis-2,3-Epoxy-Succinic Acid.

The isocitrate lyases (ICL1/2) are essential enzymes of Mycobacterium tuberculosis (Mtb), the causative agent of tuberculosis. At present, no ICL1/2 inhibitors have progressed to clinical evaluation, despite extensive drug discovery efforts. Herein, we surveyed succinate analogs against ICL1 and found that dicarboxylic acids constrained in their synperiplanar conformations, such as maleic acid, comprise uncompetitive inhibitors of ICL1 and inhibit more potently than their trans-isomers. From this, we identified cis-2,3 epoxysuccinic acid (cis-EpS) as a selective, irreversible covalent inactivator of Mtb ICL1 (kinact/Kinact= (5.0 ± 1.4) × 104 M-1 s-1; Kinact = 200 ± 50 nM), the most potent inactivator of ICL1 yet characterized. Crystallographic and mass spectrometric analysis demonstrated that Cys191 of ICL1 was S-malylated by cis-EpS, and a crystallographic "snapshot" of inactivation lent insight into the chemical mechanism of this inactivation. Proteomic analysis of E. coli lysates showed that cis-EpS selectively labeled plasmid-expressed Mtb ICL1. Consistently, cis-EpS, but not its trans-isomer, inhibited the growth of Mtb under conditions in which ICL function is essential. These findings encourage the development of analogs of cis-2,3-epoxysuccinate as antituberculosis agents.

Diffusivelike Motions in a Solvent-Free Protein-Polymer Hybrid.

The interaction between proteins and hydration water stabilizes protein structure and promotes functional dynamics, with water translational motions enabling protein flexibility. Engineered solvent-free protein-polymer hybrids have been shown to preserve protein structure, function, and dynamics. Here, we used neutron scattering, protein and polymer perdeuteration, and molecular dynamics simulations to explore how a polymer dynamically replaces water. Even though relaxation rates and vibrational properties are strongly modified in polymer coated compared to hydrated proteins, liquidlike polymer dynamics appear to plasticize the conjugated protein in a qualitatively similar way as do hydration-water translational motions.

Highly efficient uptake of neptunium from acidic feeds using two solid phase extraction resins containing diglycolamide-functionalized calix[4]arene ligands.

Two solid phase extraction resins (SPER) were prepared by impregnating solutions of two diglycolamide-functionalized calix[4]arenes in 10% isodecanol in n-dodecane into Chromosorb W, as the stationary phase. While SPER-I contained n-propyl functionalized calix[4]arene, SPER-II contained the calix[4]arene with isopentyl groups at the carboxamide nitrogen atoms. The SPERs were characterized by SEM, TGA, FTIR, etc. and were used for the batch uptake of neptunium(IV) from nitric acid feed solutions. While the uptake of Np(IV) was extremely high with SPER-I (Kd: 47,544 at 3 M nitric acid, ca. 8% extractant loading), SPER-II displayed a significantly lower extraction efficiency (Kd: 13,724 under identical conditions) as indicated by the batch uptake studies. Sorption isotherm studies were carried out which indicated good fitting to the Langmuir model suggesting uptake conforming to monolayer sorption. Fitting to the D-R isotherm model conformed to a chemisorption model. Column studies were also carried out and the elution profiles, obtained with solutions of oxalic acid and nitric acid indicated very sharp peaks suggesting that the column can be used for the separation of Np(IV) from acidic radioactive feeds.

Preparation, characterization, and in vitro and in vivo biocompatibility evaluation of polymer (amino acid and glycolic acid)/hydroxyapatite composite for bone repair.

A composite of hydroxyapatite (HA) and polymers prepared from amino acids and glycolic acid (PAG) was synthesized using an in situ melting polycondensation method. The in vitro degradability and bioactivity of the composite were evaluated, as well as its in vitro and in vivo biocompatibility based on subcutaneous and osseous implantation of samples in New Zealand white rabbits for 8 weeks. The results showed that the PAG/HA composite had higher degradability than PAG and showed a typical apatite morphology after immersion in simulated body fluid for 5 d. Both the PAG/HA composite and PAG alone showed excellent in vitro biocompatibility. In the rabbit model, PAG/HA composite could induce formation of new bone tissue after 4 weeks implantation, mainly owing to the excellent in vivo bioactivity of the implant. These results suggest that PAG/HA composites have the potential to guide bone regeneration and could be used as biodegradable biomaterials for bone repair.

Comparative uptake studies on trivalent f-cations from acidic feeds using two extraction chromatography resins containing a diglycolamide in molecular diluent and ionic liquid.

Low molecular weight diglycolamide (DGA) extractants were tested for the extraction of europium(III) and americium(III) from nitric acid solutions in n-dodecane, a molecular diluent and 1-butyl-3-methylimidazolium bis(trifluoromethanesulphonyl) imide (C4mim⋅NTf2), a room temperature ionic liquid, as the diluents. N,N,N',N'-tetra-n-butyl diglycolamide (TBDGA) was selected for extraction chromatography (XC) studies involving Eu(III) and Am(III). While the TBDGA resin containing n-dodecane gave reasonably high Kd values, that containing the ionic liquid showed higher Eu(III) uptake values. Compared to Eu(III), Am(III) was extracted by the resins to a lower extent. The loaded Eu(III) was back extracted from the resin using 0.05 M EDTA solutions in a buffered medium containing 1 M guanidine carbonate. Reusability studies indicated that, while the ionic liquid-based resin can be conveniently recycled five times with very marginal decrease in the percentage extraction values, there was a sharp decrease in the percent extraction after three cycles with the n-dodecane-based resin. The uptake data was fitted into different isotherm models and the results conformed to the Langmuir model. Based on the batch uptake studies, columns were prepared and the breakthrough as well as elution profiles were obtained. The elution profiles were found to be sharp without any significant tailing.

pH-dependent delivery of chlorhexidine from PGA grafted mesoporous silica nanoparticles at resin-dentin interface.

BACKGROUND: A low pH environment is created due to the production of acids by oral biofilms that further leads to the dissolution of hydroxyapatite crystal in the tooth structure significantly altering the equilibrium. Although the overall bacterial counts may not be eradicated from the oral cavity, however, synthesis of engineered anti-bacterial materials are warranted to reduce the pathogenic impact of the oral biofilms. The purpose of this study was to synthesize and characterize chlorhexidine (CHX)-loaded mesoporous silica nanoparticles (MSN) grafted with poly-L-glycolic acid (PGA) and to test the in vitro drug release in various pH environments, cytotoxicity, and antimicrobial capacity. In addition, this study aimed to investigate the delivery of CHX-loaded/MSN-PGA nanoparticles through demineralized dentin tubules and how these nanoparticles interact with tooth dentin after mixing with commercial dentin adhesive for potential clinical application. RESULTS: Characterization using SEM/TEM and EDX confirmed the synthesis of CHX-loaded/MSN-PGA. An increase in the percentage of drug encapsulation efficiency from 81 to 85% in CHX loaded/MSN and 92-95% in CHX loaded/MSN-PGA proportionately increased with increasing the amount of CHX during the fabrication of nanoparticles. For both time-periods (24 h or 30 days), the relative microbial viability significantly decreased by increasing the CHX content (P < 0.001). Generally, the cell viability percentage of DPSCs exposed to MSN-PGA/Blank, CHX-loaded/MSN, and CHX-loaded/MSN-PGA, respectively was > 80% indicating low cytotoxicity profiles of experimental nanoparticles. After 9 months in artificial saliva (pH 7.4), the significantly highest micro-tensile bond strength value was recorded for 25:50 CHX/MSN and 25:50:50 CHX/MSN-PGA. A homogenous and widely distributed 50:50:50 CHX-loaded/MSN-PGA nanoparticles exhibited excellent bonding with the application of commercially available dentin adhesive. CONCLUSIONS: A pH-sensitive CHX release response was noted when loaded in MSN grafted PGA nanoparticles. The formulated drug-loaded nanocarrier demonstrated excellent physicochemical, spectral, and biological characteristics. Showing considerable capacity to penetrate effectively inside dentinal tubules and having high antibacterial efficacy, this system could be potentially used in adhesive and restorative dentistry.

Nanoencapsulated hybrid compound SA-2 with long-lasting intraocular pressure-lowering activity in rodent eyes.

Purpose: Glaucoma is a neurodegenerative disease of the eye with an estimated prevalence of more than 111.8 million patients worldwide by 2040, with at least 6 to 8 million projected to become bilaterally blind. Clinically, the current method of slowing glaucomatous vision loss is to reduce intraocular pressure (IOP). In this manuscript, we describe the in vitro cytoprotective and in vivo long lasting IOP-lowering activity of the poly D, L-lactic-co-glycolic acid (PLGA) nanoparticle-encapsulated hybrid compound SA-2, possessing nitric oxide (NO) donating and superoxide radical scavenging functionalities. Methods: Previously characterized primary human trabecular meshwork (hTM) cells were used for the study. hTM cells were treated with SA-2 (100 µM, 200 µM, and 1,000 µM), SA-2 PLGA-loaded nanosuspension (SA-2 NPs, 0.1%), or vehicle for 30 min. Cyclic guanosine monophosphate (cGMP) and super oxide dismutase (SOD) levels were analyzed using commercial kits. In another experiment, hTM cells were pretreated with tert-butyl hydrogen peroxide (TBHP, 300 µM) for 30 min followed by treatment with escalating doses of SA-2 for 24 h, and CellTiter 96 cell proliferation assay was performed. For the biodistribution study, the cornea, aqueous humor, vitreous humor, retina, choroid, and sclera were collected after 1 h of administration of a single eye drop (30 µl) of SA-2 NPs (1% w/v) formulated in PBS to rat (n = 6) eyes. Compound SA-2 was quantified using high performance liquid chromatography /mass spectrometry (HPLC/MS). For the IOP-lowering activity study, a single SA-2 NPs (1%) eye drop was instilled in normotensive rats eyes and in the IOP-elevated rat eyes (n = 3/group, in the Morrison model of glaucoma), or Ad5TGFß2-induced ocular hypertensive (OHT) mouse eyes (n = 5/group). IOP was measured at various time points up to 72 h, and the experiment was repeated in triplicate. Mouse aqueous humor outflow facility was determined with multiple flow-rate infusion and episcleral venous pressure estimated with manometry. Results: SA-2 upregulated cGMP levels (six- to ten-fold) with an half maximal effective concentration (EC50) of 20.3 µM in the hTM cells and simultaneously upregulated (40-fold) the SOD enzyme when compared with the vehicle-treated hTM cells. SA-2 also protected hTM cells from TBHP-induced decrease in cell survival with an EC50 of 0.38 µM. A single dose of slow-release SA-2 NPs (1% w/v) delivered as an eye drop significantly lowered IOP (by 30%) in normotensive and OHT rodent eyes after 3 h post-dose, with the effect lasting up to 72 h. A statistically significant increase in aqueous outflow facility and a decrease in episcleral venous pressure was observed in rodents at this dose at 54 h. Conclusions: Hybrid compound SA-2 upregulated cGMP in hTM cells, increased outflow facility and decreased IOP in rodent models of OHT. Compound SA-2 possessing an antioxidant moiety provided additive cytoprotective activity to oxidatively stressed hTM cells by scavenging reactive oxygen species (ROS) and increasing SOD enzyme activity. Additionally, the PLGA nanosuspension formulation (SA-2 NPs) provided longer duration of IOP-lowering activity (up to 3 days) in comparison with the free non-encapsulated SA-2 drug. The data have implications for developing novel, non-prostaglandin therapeutics for IOP-lowering and cytoprotective effects with the possibility of an eye drop dosing regimen of once every 3 days for patients with glaucoma.

pH-Dependent peptide bond formation by the selective coupling of α-amino acids in water.

A novel mechanism enabling selective peptide elongation by coupling α-amino acids over other potentially competing prebiotic amines under acidic aqueous condition is suggested. It proceeds via the generation of a carboxylic acid anhydride intermediate with subsequent intramolecular formation of the amide bond.

Selective extraction and column separation for 16 kinds of rare earth element ions by using N, N-dioctyl diglycolacid grafted silica gel particles as the stationary phase.

The selective extraction and column separation rear earth elements (REEs) were investigated in the present work. Herein, the functional ligand of N, N-dioctyldiglycolic acid (DODGA) was synthesized and chemically grafted on the silica gel (SG) particles to give the novel material SG@DODGA. The obtained SG@DODGA was fully characterized by NMR, BET (Brunauer-Emmett-Teller) N2 physisorption analysis, atom force microscopy (AFM), scanning electronic microscopy (SEM), Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). After investigating the adsorption capability of the SG@DODGA towards 16 kinds of REEs (La, Ce, Pr, Nd, Sm, Eu, Gd, Td, Dy, Ho, Er, Tm, Yb, Lu, Y and Sc), the results showed that the adsorption kinetic data was better fitted with pseudo-second-order model and Elovich model, the adsorption isotherms data was suitable for Freundlich model. The above result also indicated that the adsorption mechanism between the SG@DODGA and REEs was chemical ion exchange. Moreover, choose SG@DODGA as the column chromatography stationary phase and packed in a glass column for the column studies to obtain breakthroughs profile of each REEs. Furthermore, the column was used to try to separate the mixed 16 kinds of REEs. The first attempt to preliminary separate REEs result showed that this column could be applied for simply separating REEs. The light REEs La, Ce, Pr, Nd exhibited better separation effect than the other REEs.