Release Pattern of Light Aromatic Hydrocarbons during the Biomass Roasting Process.

Roasting is an important step in the pretreatment of biomass upgrading. Roasting can improve the fuel quality of biomass, reduce the O/C and H/C ratios in the biomass, and provide the biomass with a fuel quality comparable to that of lignite. Therefore, studying the structure and component evolution laws during biomass roasting treatment is important for the rational and efficient utilization of biomass. When the roasting temperature is 200-300 °C, the cellulose and hemicellulose in the biomass undergo a depolymerization reaction, releasing many monocyclic aromatic hydrocarbons with high reactivity. The proportion of monocyclic aromatic hydrocarbons in biomass roasting products can be effectively regulated by controlling the reaction temperature, residence time, catalyst, baking atmosphere, and other factors in the biomass roasting process. This paper focuses on the dissociation law of organic components in the pretreatment process of biomass roasting.

Lignin and spent bleaching clay into mono-aromatic hydrocarbons by a cascade dual catalytic pyrolysis system: Critical role of spent bleaching clay.

In the present study, a cascade dual catalytic system was used for the co-pyrolysis of lignin with spent bleaching clay (SBC) to efficiently produce mono-aromatic hydrocarbon (MAHs). The cascade dual catalytic system is composed of calcined SBC (CSBC) and HZSM-5. In this system, SBC not only acts as a hydrogen donor and catalyst in the co-pyrolysis process, but is also used as a primary catalyst in the cascade dual catalytic system after recycling the pyrolysis residues. The effects of different influencing factors (i.e., temperature, CSBC-to-HZSM-5 ratio, and raw materials-to-catalyst ratio) on the system were explored. It was observed that, when the temperature was 550 °C, the CSBC-to-HZSM-5 ratio was 1:1, and when the raw materials-to-catalyst ratio was 1:2, the highest bio-oil yield was 21.35 wt%. The relative MAHs content in bio-oil was 73.34 %, whereas the relative polycyclic aromatic hydrocarbons (PAHs) content was 23.01 %. Meanwhile, the introduction of CSBC inhibited the generation of graphite-like coke as indicated by HZSM-5. This study realizes the full resource utilization of spent bleaching clay and reveals the environmental hazards caused by spent bleaching clay and lignin waste.

Determining MOSH and MOAH with High Sensitivity in Vegetable Oil─A New, Reliable, and Comparable Approach Using Online LC-GC-FID─Evaluation of Method Precision Data.

A method for the analysis of saturated mineral oil hydrocarbons (MOSH) and aromatic mineral oil hydrocarbons (MOAH) has been developed to improve interlaboratory precisions especially for amounts below 10 mg/kg. This approach was adopted as the standard method DGF C-VI 22 (20) of the German Society of Fat Sciences. Therefore, this method was evaluated on different edible oils containing a variety of interfering biogenic substances. The precision data were determined in an interlaboratory trial with an international group of 14 laboratories from Germany, Austria, and Italy. Good reproducible relative standard deviations for total MOSH (12.5-20.7%) and total MOAH (12.4-39.5%) as well as HorRat values ranging between 1.1 and 2.3 for total MOSH and between 0.9 and 2.6 for total MOAH have been achieved. As some matrices showed residual interferences in the MOAH fraction, these substances were further analyzed by online high-performance liquid chromatography-comprehensive two dimensional gas chromatography with time of flight mass detection.

Thermodynamics of translational and rotational dynamics of C9 hydrocarbons in the pores of zeolite-beta.

There has been a growing interest in the separation of aromatic hydrocarbon molecules from the petroleum stream using zeolite-based technologies. This led to numerous experimental and molecular simulation studies of the structural and dynamical properties of aromatic hydrocarbons under the confinement of microporous materials like zeolites. The understanding of the behavior of the isomers of the trimethylbenzene under confinement is crucial for their separation and purification from industrial streams. Here, we investigate the translational and rotational dynamics and associated thermodynamics of three isomers of trimethyl benzene, namely, 1,2,3-trimethyl benzene (1,2,3-TMB), 1,2,4-trimethyl benzene (1,2,4-TMB), and 1,3,5-trimethylbenzene (1,3,5-TMB) under the confinement of zeolite-beta (BEA) using molecular dynamics (MD) simulations. The trends in the diffusion coefficients of the TMB isomers calculated from our MD simulation data are in good agreement with the data already available in the literature. Analysis of dynamics and associated thermodynamic properties indicate that 1,2,4-TMB is translationally more facile than the other two isomers. The rotational motion of TMB isomers is largely anisotropic and it is relatively more significant for both 1,2,4-TMB and 1,3,5-TMB. The thermodynamic properties reveal that the distinguishability in the dynamic properties among these three isomers is essentially caused by entropy. These results are not only critical to engineer the separation process of TMB isomers across the zeolite beds but also to understand the different catalytic processes such as trans-alkylation, conversion, cracking etc.

Recent developments in enantio- and diastereoselective hydrogenation of N-heteroaromatic compounds.

The enantioselective and diastereoselective hydrogenation of N-heteroaromatic compounds is an efficient strategy to access chirally enriched cyclic heterocycles, which often possess highly bio-active properties. This strategy, however, has only been established in recent times. This is in part due to the challenges of the high stability of the aromatic compounds and the presence of heteroatoms that have the potential to poison the chiral catalysts. Additionally, N-heteroaromatic compounds are a structurally diverse family of substrates, each group showing distinct reactivity in hydrogenation. Advances in recent years have allowed various N-heteroaromatic compounds, including pyridines, indoles, quinolines, isoquinolines, quinoxalines and imidazoles, to be hydrogenated with good to excellent enantioselectivity under appropriate reaction conditions. Transition-metal catalysis, utilising iridium, ruthenium, rhodium, and palladium complexes, has been found to play an important role in this field. More recently, organocatalysis has been shown to be efficient for the hydrogenation of certain N-heteroaromatic compounds. This review provides an analysis of the recent developments in the enantioselective and diastereoselective hydrogenation of N-heteroaromatic compounds. The importance of these molecules and their applications to drug discovery has been highlighted throughout the review.

A carboxylatopillar[5]arene-based pH-triggering supramolecular photosensitizer for enhanced photodynamic antibacterial efficacy.

A pH-triggering supramolecular antibacterial photosensitizer was constructed by host-guest interaction between a water-soluble porphyrin photosensitizer and carboxylatopillar[5]arene (P[5]). The formation of the supramolecular complex not only improves the biocompatibility of the photosensitizer, but also enhances antibacterial efficacy by pH-triggering dissociation under the low pH bacterial microenvironment.

Arene-Ruthenium(II) Complexes with Carbothiamidopyrazoles as a Potential Alternative for Antibiotic Resistance in Human.

To meet the demand for alternatives to commonly used antibiotics, this paper evaluates the antimicrobial potential of arene-ruthenium(II) complexes and their salts, which may be of value in antibacterial treatment. Their antimicrobial activity (MIC, MBC/MFC) was examined in vitro against Staphylococcus aureus, Staphylococcus epidermidis, Enterococcus faecalis, Pseudomonas aeruginosa, Proteus vulgaris and Candida albicans and compared with classic antibiotics used as therapeutics. Selected arene-ruthenium(II) complexes were found to have synergistic effects with oxacillin and vancomycin against staphylococci. Their bactericidal effect was found to be associated with cell lysis and the ability to cut microbial DNA. To confirm the safety of the tested arene-ruthenium(II) complexes in vivo, their cytotoxicity was also investigated against normal human foreskin fibroblasts (HFF-1). In addition, the antioxidant and thus pro-health potential of the compounds, i.e., their nonenzymatic antioxidant capacity (NEAC), was determined by two different methods: ferric-TPTZ complex and DPPH assay.

Synthesis and evaluation of potent novel inhibitors of human sulfide:quinone oxidoreductase.

Here we report the first small-molecule inhibitors of human sulfide:quinone oxidoreductase (SQOR) that decrease the rate of breakdown of hydrogen sulfide (H2S), a potent cardioprotective signaling molecule. SQOR is a mitochondrial membrane-bound protein that catalyzes a two-electron oxidation of H2S to sulfane sulfur (S0), using glutathione (or sulfite) and coenzyme Q (CoQ) as S0 and electron acceptor, respectively. Inhibition of SQOR may constitute a new approach for the treatment of heart failure with reduced ejection fraction. Starting from top hits identified in a high-throughput screen, we conducted SAR development guided by docking of lead candidates into our crystal structure of SQOR. We identified potent SQOR inhibitors such as 19 which has an IC50 of 29 nM for SQOR inhibition and favorable pharmacokinetic and ADME properties required for in vivo efficacy testing.

1,2-Difunctionalized bicyclo[1.1.1]pentanes: Long-sought-after mimetics for ortho/meta-substituted arenes.

The development of a versatile platform for the synthesis of 1,2-difunctionalized bicyclo[1.1.1]pentanes to potentially mimic ortho/meta-substituted arenes is described. The syntheses of useful building blocks bearing alcohol, amine, and carboxylic acid functional handles have been achieved from a simple common intermediate. Several ortho- and meta-substituted benzene analogs, as well as simple molecular matched pairs, have also been prepared using this platform. The results of in-depth ADME (absorption, distribution, metabolism, and excretion) investigations of these systems are presented, as well as computational studies which validate the ortho- or meta-character of these bioisosteres.

AromTool: predicting aromatic stacking energy using an atomic neural network model.

Aromatic stacking exists widely and plays important roles in protein-ligand interactions. Computational tools to automatically analyze the geometry and accurately calculate the energy of stacking interactions are desired for structure-based drug design. Herein, we employed a Behler-Parrinello neural network (BPNN) to build predictive models for aromatic stacking interactions and further integrated it into an open-source Python package named AromTool for benzene-containing aromatic stacking analysis. Based on extensive testing, AromTool presents desirable precision in comparison to DFT calculations and excellent efficiency for high-throughput aromatic stacking analysis of protein-ligand complexes.

Unmasking Steps in Intramolecular Aromatic Hydroxylation by a Synthetic Nonheme Oxoiron(IV) Complex.

In this study, a methyl group on the classic tetramethylcyclam (TMC) ligand framework is replaced with a benzylic group to form the metastable [FeIV (Osyn )(Bn3MC)]2+ (2-syn; Bn3MC=1-benzyl-4,8,11-trimethyl-1,4,8,11-tetraazacyclotetradecane) species at -40 °C. The decay of 2-syn with time at 25 °C allows the unprecedented monitoring of the steps involved in the intramolecular hydroxylation of the ligand phenyl ring to form the major FeIII -OAr product 3. At the same time, the FeII (Bn3MC)2+ (1) precursor to 2-syn is re-generated in a 1:2 molar ratio relative to 3, accounting for the first time for all the electrons involved and all the Fe species derived from 2-syn as shown in the following balanced equation: 3 [FeIV (O)(LPh )]2+ (2-syn)→2 [FeIII (LOAr )]2+ (3)+[FeII (LPh )]2+ (1)+H2 O. This system thus serves as a paradigm for aryl hydroxylation by FeIV =O oxidants described thus far. It is also observed that 2-syn can be intercepted by certain hydrocarbon substrates, thereby providing a means to assess the relative energetics of aliphatic and aromatic C-H hydroxylation in this system.

In silico studies: Physicochemical properties, drug score, toxicity predictions and molecular docking of organosulphur compounds against Diabetes mellitus.

Diabetes mellitus (DM) is a significant common metabolic disorder seen all over the world. In 2020, according to the International Diabetes Federation (IDF), out of 463 million people who have diabetes all over the world, 77 million belong to India. As per the statistical prediction, the affected numbers are probably expected to rise to 642 million by 2040. The commercially available anti-diabetic drugs in the market include metformin, sulphonyl urea, meglitinides, miglitol, acarbose, biguanides, and thiazolidinediones cause side effects like hypoglycaemia, dizziness, liver cell injury, digestive discomfort, neurological defects, etc. Hence, bioactive organosulphur based functional ligands are chosen in this study to arrive at a newer drug for DM. In this work, in silico analysis of organosulphur molecular descriptors like physicochemical properties, solubility, drug score, and toxicity predictions are evaluated using OSIRIS and Toxtree freeware. The essential parameters for discovering drugs for biopharmaceutical formulations viz the solubility of drugs and toxicity have been calculated. The protein target Dipeptidyl peptidase DPP4 (PID: 2RIP) was docked against energy minimised sulphur compounds using Hex 6.3. The results indicate that the drug likeliness of the molecule 4, that is, N-[(3,3-dimethyl piperidin-2-yl) methyl]-4-ethyl sulphonyl aniline is active with decreasing binding energy score (-212.24 Kcal mol-1 ) with no toxicity and also few sulphur compounds are active against diabetes compared to standard drug metformin (-158.33 Kcal mol-1 ). The best drug-like ligand N-[(3,3-dimethyl piperidin-2-yl) methyl]-4-ethyl sulphonyl aniline, was docked using commercial Maestro Schrodinger software to predict the results.

Exploring aromatic cage flexibility of the histone methyllysine reader protein Spindlin1 and its impact on binding mode prediction: an in silico study.

Some of the main challenges faced in drug discovery are pocket flexibility and binding mode prediction. In this work, we explored the aromatic cage flexibility of the histone methyllysine reader protein Spindlin1 and its impact on binding mode prediction by means of in silico approaches. We first investigated the Spindlin1 aromatic cage plasticity by analyzing the available crystal structures and through molecular dynamic simulations. Then we assessed the ability of rigid docking and flexible docking to rightly reproduce the binding mode of a known ligand into Spindlin1, as an example of a reader protein displaying flexibility in the binding pocket. The ability of induced fit docking was further probed to test if the right ligand binding mode could be obtained through flexible docking regardless of the initial protein conformation. Finally, the stability of generated docking poses was verified by molecular dynamic simulations. Accurate binding mode prediction was obtained showing that the herein reported approach is a highly promising combination of in silico methods able to rightly predict the binding mode of small molecule ligands in flexible binding pockets, such as those observed in some reader proteins.

Mechanism-Based Insights into Removing the Mutagenicity of Aromatic Amines by Small Structural Alterations.

Aromatic and heteroaromatic amines (ArNH2) are activated by cytochrome P450 monooxygenases, primarily CYP1A2, into reactive N-arylhydroxylamines that can lead to covalent adducts with DNA nucleobases. Hereby, we give hands-on mechanism-based guidelines to design mutagenicity-free ArNH2. The mechanism of N-hydroxylation of ArNH2 by CYP1A2 is investigated by density functional theory (DFT) calculations. Two putative pathways are considered, the radicaloid route that goes via the classical ferryl-oxo oxidant and an alternative anionic pathway through Fenton-like oxidation by ferriheme-bound H2O2. Results suggest that bioactivation of ArNH2 follows the anionic pathway. We demonstrate that H-bonding and/or geometric fit of ArNH2 to CYP1A2 as well as feasibility of both proton abstraction by the ferriheme-peroxo base and heterolytic cleavage of arylhydroxylamines render molecules mutagenic. Mutagenicity of ArNH2 can be removed by structural alterations that disrupt geometric and/or electrostatic fit to CYP1A2, decrease the acidity of the NH2 group, destabilize arylnitrenium ions, or disrupt their pre-covalent transition states with guanine.

Synthesis of 15N-labeled heterocycles via the cleavage of C-N bonds of anilines and glycine-15N.

A nitrogen replacement process that directly incorporates the 15N atom of glycine-15N into anilines was reported. The process involves a Csp2-N bond cleavage of anilines driven by dearomatization and a Csp3-N bond cleavage of glycine-15N driven by aromatization. A variety of 15N-labeled aromatic heterocycles can be prepared via this process.

Heteroaromatic Hyperbranched Polyelectrolytes: Multicomponent Polyannulation and Photodynamic Biopatterning.

We reported an efficient multicomponent polyannulation for in situ generation of heteroaromatic hyperbranched polyelectrolytes by using readily accessible internal diynes and low-cost, commercially available arylnitriles, NaSbF6 , and H2 O/AcOH. The polymers were obtained in excellent yields (up to 99 %) with extraordinary high molecular weights (Mw up to 1.011×106 ) and low polydispersity indices. The resulting polymers showed good processibility and high quantum yields with tunable emission in the solid state, making them ideal materials for highly ordered fluorescent photopatterning. These hyperbranched polyelectrolytes also possessed strong ability to generate reactive oxygen species, which allowed their applications in efficient bacterial killing and customizable photodynamic patterning of living organisms in a simple and cost-effective way.

Nucleophilic Aromatic Substitution of Polyfluoroarene to Access Highly Functionalized 10-Phenylphenothiazine Derivatives.

Nucleophilic aromatic substitution (SNAr) reactions can provide metal-free access to synthesize monosubstituted aromatic compounds. We developed efficient SNAr conditions for p-selective substitution of polyfluoroarenes with phenothiazine in the presence of a mild base to afford the corresponding 10-phenylphenothiazine (PTH) derivatives. The resulting polyfluoroarene-bearing PTH derivatives were subjected to a second SNAr reaction to generate highly functionalized PTH derivatives with potential applicability as photocatalysts for the reduction of carbon-halogen bonds.

Photochemical intermolecular dearomative cycloaddition of bicyclic azaarenes with alkenes.

Dearomative cycloaddition reactions represent an ideal means of converting flat arenes into three-dimensional architectures of increasing interest in medicinal chemistry. Quinolines, isoquinolines, and quinazolines, despite containing latent diene and alkene subunits, are scarcely applied in cycloaddition reactions because of the inherent low reactivity of aromatic systems and selectivity challenges. Here, we disclose an energy transfer-mediated, highly regio- and diastereoselective intermolecular [4 + 2] dearomative cycloaddition reaction of these bicyclic azaarenes with a plethora of electronically diverse alkenes. This approach bypasses the general reactivity and selectivity issues, thereby providing various bridged polycycles that previously have been inaccessible or required elaborate synthetic efforts. Computational studies with density functional theory elucidate the mechanism and origins of the observed regio- and diastereoselectivities.

A peroxisomal ß-oxidative pathway contributes to the formation of C6-C1 aromatic volatiles in poplar.

Benzenoids (C6-C1 aromatic compounds) play important roles in plant defense and are often produced upon herbivory. Black cottonwood (Populus trichocarpa) produces a variety of volatile and nonvolatile benzenoids involved in various defense responses. However, their biosynthesis in poplar is mainly unresolved. We showed feeding of the poplar leaf beetle (Chrysomela populi) on P. trichocarpa leaves led to increased emission of the benzenoid volatiles benzaldehyde, benzylalcohol, and benzyl benzoate. The accumulation of salicinoids, a group of nonvolatile phenolic defense glycosides composed in part of benzenoid units, was hardly affected by beetle herbivory. In planta labeling experiments revealed that volatile and nonvolatile poplar benzenoids are produced from cinnamic acid (C6-C3). The biosynthesis of C6-C1 aromatic compounds from cinnamic acid has been described in petunia (Petunia hybrida) flowers where the pathway includes a peroxisomal-localized chain shortening sequence, involving cinnamate-CoA ligase (CNL), cinnamoyl-CoA hydratase/dehydrogenase (CHD), and 3-ketoacyl-CoA thiolase (KAT). Sequence and phylogenetic analysis enabled the identification of small CNL, CHD, and KAT gene families in P. trichocarpa. Heterologous expression of the candidate genes in Escherichia coli and characterization of purified proteins in vitro revealed enzymatic activities similar to those described in petunia flowers. RNA interference-mediated knockdown of the CNL subfamily in gray poplar (Populus x canescens) resulted in decreased emission of C6-C1 aromatic volatiles upon herbivory, while constitutively accumulating salicinoids were not affected. This indicates the peroxisomal ß-oxidative pathway participates in the formation of volatile benzenoids. The chain shortening steps for salicinoids, however, likely employ an alternative pathway.

Aromatic Cope rearrangements.

Reviewed herein is the aromatic Cope rearrangement, a Cope rearrangement where one (or both) of the alkenes of the 1,5-diene are part of a greater aromatic system. While the Cope rearrangement of 1,5-dienes has seen wide utility, variation, and application in chemical synthesis, the aromatic Cope rearrangement, comparatively, has not. This review summarizes the ∼40 papers dating back to 1956 on this topic and is divided into the following sections: (1) introduction, including kinetic and thermodynamic challenges of the aromatic Cope rearrangement, and (2) key substrate features, of which there are four general types: (i) α-allyl-α-aryl malonates (and related substrates), (ii) 1-aryl-2-vinylcyclopropanes, and (iii) anion-accelerated aromatic oxy-Cope substrates, and (iv) the concept of synchronized aromaticity. Ultimately, we hope this review will draw attention to a potentially valuable transformation for arene functionalization that warrants further studies and development.