Rapid detection of tertiary butylated hydroquinone in food samples using Mn-MOF@f-CNF composite-modified screen-printed electrode.

Hydroquinone-based organic molecules are often used as unavoidable preservatives in the food industry. Among these additives, tertiary butylated hydroquinone (TBHQ) is widely employed as a preservative in various processed foods. However, the potential health risks associated with the excessive presence of TBHQ in food products have raised significant concerns. To address this pressing issuea novel binder-free composite composed of a manganese metal-organic framework and functionalized carbon nanofibers (Mn-MOF/f-CNF) has been developed as an electrode modifier for the ultrasensitive detection of TBHQ in food samples. The Mn-MOF/f-CNF composite was achieved using the ultrasonication method, revealing a lamellar sheet-like structure of the Mn-MOF and the curly thread-like fibrous structure of f-CNF. The developed Mn-MOF/f-CNF/SPE sensor system resulted in well-defined redox signals for TBHQ detection in a neutral pH solution. Compared to the unmodified SPE system, the modified system showed approximately a 300 mV reduction in overpotential and a twofold increase in peak current signal for TBHQ detection. The Mn-MOF/f-CNF/SPE sensor system showed a linear concentration window of 0.01 to 800 µM with a sensitivity of 6.28 µA µM-1 cm-2 and the obtained detection limit was 1.36 nM. Additionally, the proposed sensor displayed excellent reproducibility and repeatable results with an RSD of less than 5%. The real-time applicability of the Mn-MOF/f-CNF/SPE sensor system was demonstrated using real samples such as potato chips and instant noodles, showing excellent results with a recovery range of 95.1-98.5%.

A sensitive intelligent point-of-care test method for tert-butylhydroquinone in edible oil via a test strip with a smartphone.

Tert-butylhydroquinone (TBHQ) is easily overused or illegally added to edible oil and attracts a growing concern because of its cytotoxic, liver-damaging, and carcinogenic effects. Thus, a sensitive and intelligent point-of-care testing (iPOCT) method is developed to fulfill the on-site monitoring. This iPOCT method depended on a fluorescent immunochromatographic assay within 15 min. Under optimization, the limit of quantification (LOQ) was calculated as 0.03 µg mL-1. The iPOCT method provided a low limit of detection (LOD) of 0.02 µg mL-1, a wide linear range of 0.03-100 µg mL-1, and great selectivity. Recoveries by the spiking experiments ranged from 97.4% to 103.5% with relative standard deviations (RSDs) of 2.4%-4.9% in soybean, peanut, rapeseed, and corn oil samples. The results showed that the iPOCT method is highly consistent with the high-performance liquid chromatography (HPLC) method.

Development of ZrO(OH)2@HCS co-modified molecularly imprinted gel-based electrochemical sensing platform for sensitive and selective detection of tert-butylhydroquinone in foods.

Herein, a novel molecularly imprinted gel (MIG)-based electrochemical sensor equipped with hydrated zirconium oxide@hollow carbon spheres (ZrO(OH)2@HCS) was developed for highly sensitive and selective detection of tert-butylhydroquinone (TBHQ) in foods. The MIG was synthesized by using L-histidine to rapidly cross-link cationic guar gum, acrylamide and TBHQ through intermolecular hydrogen bonds and electrostatic interactions at room temperature, which offered outstanding specific recognition performance for TBHQ. ZrO(OH)2@HCS possessing excellent conductivity and water dispersibility was employed for signal amplification. Under optimal conditions, the MIG-ZrO(OH)2@HCS/GCE sensor showed a wide dynamic detection range (0.025-100 µM) with a low limit of detection (6.7 nM). TBHQ recovery experiments were conducted in spiked peanut oil and milk powder, yielding excellent recoveries. Moreover, the sensor was successfully utilized to detect TBHQ levels in snowflake chicken cutlets, crispy fried pork and boneless chicken fillets, and the results were in agreement with those obtained by the high performance liquid chromatography method.

An electrochemical sensor based on electrochemically activated carbon cloth and poly (o-aminothiophenol) cross-linked nanogold imprinted layer for the determination of tert-butylhydroquinone.

In this study, an electrochemical sensor based on MoS2 with enhanced electrochemical signals from electrochemically activated carbon cloth (EACC) electrodes and cross-linked o-aminothiophenol functionalized AuNPs (o-ATP@AuNPs) was developed for the detection of the unsaturated vegetable oil antioxidant tert-butylhydroquinone (TBHQ). In this approach, carbon cloth is activated through the implementation of electrochemical methods, thereby effectively increasing its specific surface area. The resulting EACC, serving as an electrode substrate, enables the growth of additional nanomaterials and enhances conductivity. The incorporation of MoS2 effectively augments the sensitivity of the electrochemical sensor. Subsequently, MIP/MoS2/EMCC is formed via electropolymerization, utilizing TBHQ as the template molecule and o-ATP@AuNPs as the functional monomer. The SS bond of o-ATP ensures a strong and stable connection between MoS2 and o-ATP@AuNPs, thereby facilitating the immobilization of MIP. In addition, the high conductivity possessed by o-ATP@AuNPs could effectively improve the sensitivity of the electrochemical sensor. Under the optimal conditions, MIP/MoS2/EMCC could determine TBHQ in the range of 1 × 10-3 µM to 120 µM by differential pulse voltammetry (DPV) with a detection line of 0.72 nM. The proposed MIP/MoS2/EMCC is expected to be applied in the future for the selective and sensitive detection of TBHQ in vegetable oils.

Quantification of Arbutin and its degradation products, hydroquinone and p-Benzoquinone, in hyperpigmentation topical formulation: Effect of extraction procedure and interference assessment.

The utilization of Hydroquinone (HQ) in over-the-counter skincare items is subject to restrictions. Consequently, Arbutin (AR) serves as a reliable alternative for addressing hyperpigmentation in non-prescription topical formulations. Nevertheless, AR undergoes decomposition into HQ and p-Benzoquinone (BZ) when exposed to temperature stress, ultraviolet light, or dilution in an acidic environment, all of which can induce skin toxicity. The intention of this paper is to investigate the effect of extraction procedure on the conversion of AR to HQ and or BZ and to evaluate kinetics of AR hydrolysis to HQ. Meanwhile this study aims to evaluate AR and BZ interference with the United States Pharmacopoeia (USP) identification and assessment method for HQ Hydrolytic stress during extraction conditions underwent optimization through systematic screening tests. Subsequent assessment of the residual drug and its degradation products were achieved by HPLC method. The resulting data were meticulously fitted to various kinetic models. To analyze the potential interference of AR in HQ measurement using USP method, the standard concentrations of AR and HQ were analyzed through UV-VIS spectrophotometry. For enhanced certainty, a validated HPLC method analysis was also conducted. Notably, the acid hydrolysis of AR exhibited independence from its initial concentration. So, the hydrolytic degradation of AR exhibited a Zero-order kinetic profile. Furthermore, the proven interference of AR in the UV-VIS spectrophotometry method was identified within the context of the USP method. This study successfully utilized an adopted HPLC method for the concurrent quantification of AR, HQ, and BZ. The potential interference of AR in the UV-VIS spectrophotometric assay for HQ may lead to false results especially for regulatory purposes.

Microbial synthesis of antimony sulfide to prepare catechol and hydroquinone electrochemical sensor by pyrolysis and carbonization.

The application of antimony sulfide sensors, characterized by their exceptional stability and selectivity, is of emerging interest in detection research, and the integration of graphitized carbon materials is expected to further enhance their electrochemical performance. This study represents a pioneering effort in the synthesis of carbon-doped antimony sulfide materials through the pyrolysis of the mixture of microorganisms and their synthetic antimony sulfide. The prepared materials are subsequently applied to electrochemical sensors for monitoring the highly toxic compounds catechol (CC) and hydroquinone (HQ) in the environment. Via cyclic voltammetry (CV) and impedance testing, we concluded that the pyrolytic product at 700 °C (Sb-700) demonstrated the best electrochemical properties. Differential pulse voltammetry (DPV) revealed impressive separation when utilizing Sb-700/GCE for simultaneous detection of CC and HQ, exhibiting good linearity within the concentration range of 0.1-140 µM. The achieved sensitivities of 24.62 µA µM-1 cm-2 and 22.10 µA µM-1 cm-2 surpassed those of most CC and HQ electrochemical sensors. Meanwhile, the detection limits for CC and HQ were as low as 0.18 µM and 0.16 µM (S/N = 3), respectively. Additional tests confirmed the good selectivity, reproducibility, and long-term stability of Sb-700/GCE, which was effective in detecting CC and HQ in tap water and river water, with recovery rates of 100.7%-104.5% and 96.5%-101.4%, respectively. It provides a method that combines green microbial synthesis and simple pyrolysis for the preparation of electrode materials in CC and HQ electrochemical sensors, and also offers a new perspective for the application of microbial synthesized materials.

Nanozyme-integrated alcogel colorimetric sensor for rapid and on-site detection of tert-butyl hydroquinone.

Tert-butyl hydroquinone (TBHQ) stand as one of the most widely used antioxidants in food and daily chemical products. Rapid and sensitive monitoring of TBHQ holds considerable importance in safeguarding human health due to its potential risks. In this study, we devised an alcogel-based colorimetric sensor enabling the portable and visual detection of TBHQ. The Ce-UiO-66 nanozyme exhibiting remarkable oxidase-like activity, was synthesized and characterized, facilitating the catalysis of TBHQ oxidation to 2-tert-butyl-1,4-benzoquinone (TBBQ). The ensuing chromogenic reaction between TBBQ and ethylenediamine produced a stable and colored product, serving as a reliable indicator for the rapid and specific detection of TBHQ. Building upon this discovery, a portable and low-cost colorimetric sensor was fashioned by integrating the nanozyme into κ-carrageenan alcogel, thereby enabling on-site TBHQ detection via a smartphone-based sensing platform. The colorimetric sensor exhibited a detection limit of 0.8 µg mL-1, demonstrating robust performance across various matrices such as edible oils, cosmetics, and surface water. Recoveries ranged from 84.9 to 95.5%, with the sensor's accuracy further validated through gas chromatography-mass spectrometry. Our study presents an effective approach to rapid and convenient monitoring of TBHQ, exhibiting good extensibility and practicability.

A stability indicating RP-HPLC-UV assay method for the simultaneous determination of hydroquinone, tretinoin, hydrocortisone, butylated hydroxytoluene and parabens in pharmaceutical creams.

Multicomponent drugs are medications that combine two or more active pharmaceutical ingredients in a single dosage form. These dosage forms improve the patient compliance, reduce the risk of drug interactions, and simplify dosing regimens. However, quality control of these multicomponent dosage forms can be challenging, especially if the final product contains four or more ingredients that are active (comprise stabilizers, preservatives, excipients, and other components). This problem can be more pronounced if the excipients can interfere with the analysis. In this work, a stability indicating assay method was developed and validated (according to the ICH International Guidelines) for the simultaneous determination of hydroquinone (HQ), tretinoin (TRT), hydrocortisone (HCA), butylated hydroxytoluene (BHT), methyl paraben (MP) and propyl paraben (PP) in commercially available pharmaceutical creams. The proposed method is based on gradient elution using X-Bridge C18 (150 × 4.6 mm, 5 µm) column with a flow rate of 1 mL/min. The linear ranges (µg/mL) were 240-560 for HQ, 24-56 for MP, 132-308 for HCA, 6-14 for PP, 12-28 for BHT, 6.6-15 for TRT. During the validation process, the intra- and interday precision and trueness (evaluated as recovery) were found to be below 2.0% and between 100-102%, respectively. System suitability tests (SST) allow validating the herein proposed procedure specifically for pharmaceutical and industrial applications. SST test shows that the reported procedure fulfill with the Guidelines, allowing excellent separation of the analytes with very sensitive, accurate (precise and true) and reproducible quantitation of each analytes. The method was successfully applied in forced degradation studies of the six analytes. Specifically, acid degradation slightly affected HCA and BHT (91% recovery), while alkaline degradation drastically reduced HCA recovery (5.5%) and moderately affected BHT (85%). Photodegradation primarily influenced TRT quantity, and oxidative degradation intensified the BHT peak (130%).

Analysis of the antimelanogenic activity of zinc and selenium in vitro.

Melasma is an acquired chronic condition characterized by hyperchromic patches in photo-exposed areas. The search for new compounds for the treatment of melasma without side effects is constant. In this context, the aim of this study was to investigate the in vitro cytotoxic and antimelanogenic effects of the trace elements Zinc (Zn) and Selenium (Se). In this study, we evaluated the effects of 30 µM hydroquinone, this concentration did not alter mitochondrial function (MTT assay), but increased the percentage of necrotic cells and levels of reactive species. Furthermore, it showed no influence on tyrosinase activity and melanin content. Unlike hydroquinone, exposure for 48 h to 100 µM Zn and 1 and 5 µM Se had no significant influence on the analysis of reactive species, as well as on the percentage of necrotic cells. Still, specifically in relation to 100 µM Zn, it decreased the melanin content. Given the above, the trace elements Zn and Se did not show toxicity at the concentrations tested and Zn showed a promising effect, however, the mechanism needs to be better explored in order to contribute to new and updated research in the fight against melasma with a perspective of therapeutic use.

Roles of Natural Phenolic Compounds in Polycyclic Aromatic Hydrocarbons Abiotic Attenuation at Soil-Air Interfaces through Oxidative Coupling Reactions.

Little information is available on the roles of natural phenolic compounds in polycyclic aromatic hydrocarbons (PAHs) attenuation at dry soil-air interfaces. The purpose of this study was to determine the roles of model phenolic constituents of soil organic matter (SOM) on the abiotic attenuation of PAHs. The phenolic compounds can significantly change the attenuation rates of PAHs, among which hydroquinone was the most effective in promoting anthracene and benzo[a]anthracene attenuation. Product identification and sequential extraction experiments revealed hydroquinone enhanced the formation of oxidative coupling products and promoted the incorporation of PAHs into humic analogues, thereby reducing potential risks to humans and ecosystems. Electron paramagnetic resonance spectroscopy analyses showed both PAHs and phenolic compounds could donate electrons to Lewis acid sites of soil minerals, resulting in the generation of persistent free radicals (PFRs). PFRs could promote the generation of ·OH to enhance PAH oxidation and could cross-couple with PAHs, resulting in high-molecular-weight oxidative coupling products. This study revealed for the first time the reaction mechanism between PAHs and phenolic components of SOM under relatively dry conditions and provided new insights into promoting PAHs detoxification in soils but also a potential strategy to increase the organic carbon sequestration.

A Sensitive Hydroquinone Amperometric Sensor Based on a Novel Palladium Nanoparticle/Porous Silicon/Polypyrrole-Carbon Black Nanocomposite.

Exposure to hydroquinone (HQ) can cause various health hazards and negative impacts on the environment. Therefore, we developed an efficient electrochemical sensor to detect and quantify HQ based on palladium nanoparticles deposited in a porous silicon-polypyrrole-carbon black nanocomposite (Pd@PSi-PPy-C)-fabricated glassy carbon electrode. The structural and morphological characteristics of the newly fabricated Pd@PSi-PPy-C nanocomposite were investigated utilizing FESEM, TEM, EDS, XPS, XRD, and FTIR spectroscopy. The exceptionally higher sensitivity of 3.0156 µAµM-1 cm-2 and a low limit of detection (LOD) of 0.074 µM were achieved for this innovative electrochemical HQ sensor. Applying this novel modified electrode, we could detect wide-ranging HQ (1-450 µM) in neutral pH media. This newly fabricated HQ sensor showed satisfactory outcomes during the real sample investigations. During the analytical investigation, the Pd@PSi-PPy-C/GCE sensor demonstrated excellent reproducibility, repeatability, and stability. Hence, this work can be an effective method in developing a sensitive electrochemical sensor to detect harmful phenol derivatives for the green environment.

New carbon black-based conductive filaments for the additive manufacture of improved electrochemical sensors by fused deposition modeling.

The development of a homemade carbon black composite filament with polylactic acid (CB-PLA) is reported. Optimized filaments containing 28.5% wt. of carbon black were obtained and employed in the 3D printing of improved electrochemical sensors by fused deposition modeling (FDM) technique. The fabricated filaments were used to construct a simple electrochemical system, which was explored for detecting catechol and hydroquinone in water samples and detecting hydrogen peroxide in milk. The determination of catechol and hydroquinone was successfully performed by differential pulse voltammetry, presenting LOD values of 0.02 and 0.22 µmol L-1, respectively, and recovery values ranging from 91.1 to 112% in tap water. Furthermore, the modification of CB-PLA electrodes with Prussian blue allowed the non-enzymatic amperometric detection of hydrogen peroxide at 0.0 V (vs. carbon black reference electrode) in milk samples, with a linear range between 5.0 and 350.0 mol L-1 and low limit of detection (1.03 µmol L-1). Thus, CB-PLA can be successfully applied as additively manufactured electrochemical sensors, and the easy filament manufacturing process allows for its exploration in a diversity of applications.

A Deep Learning Approach to Organic Pollutants Classification Using Voltammetry.

This paper proposes a deep leaning technique for accurate detection and reliable classification of organic pollutants in water. The pollutants are detected by means of cyclic voltammetry characterizations made by using low-cost disposable screen-printed electrodes. The paper demonstrates the possibility of strongly improving the detection of such platforms by modifying them with nanomaterials. The classification is addressed by using a deep learning approach with convolutional neural networks. To this end, the results of the voltammetry analysis are transformed into equivalent RGB images by means of Gramian angular field transformations. The proposed technique is applied to the detection and classification of hydroquinone and benzoquinone, which are particularly challenging since these two pollutants have a similar electroactivity and thus the voltammetry curves exhibit overlapping peaks. The modification of electrodes by carbon nanotubes improves the sensitivity of a factor of about ×25, whereas the convolution neural network after Gramian transformation correctly classifies 100% of the experiments.

[Determination of 32 oxidative dyes by high performance liquid chromatography and confirmation by high performance liquid chromatography-tandem mass spectrometry].

Various types of oxidative dyes used in hair dye products possess poor stability and have varying frequency of use. Interference problems also frequently arise in actual sample measurements. Therefore, it is necessary to establish a simple, rapid, accurate, and specific method for the determination of common dyes in hair dye products for their effective regulation. In this study, dyes were grouped according to their frequency of use. Using a C18 column that minimizes the silanol effect and influence of metals, the quantitative high performance liquid chromatography (HPLC) method for 32 dyes listed in Safety and Technical Standards for Cosmetics (2015 edition) was optimized, and a high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) confirmatory method for the dyes was established. The samples were extracted using a mixed solution of ethanol-water (1∶1, v/v) with 10 g/L sodium bisulfite solution as an antioxidant, vortexed and mixed, and then extracted by ultrasonication in an ice bath for 10 min. Methanol, acetonitrile, and phosphate buffer were used as the mobile phases in the HPLC analysis. Additionally, two different elution conditions (chromatographic gradient) were used for the separation of 32 oxidative dyes, which were detected at a wavelength of 280 nm. The HPLC separations were compared using columns of particle sizes 5 µm and 2.7 µm; 5 µm C18 columns with better anti-interference and antiblocking ability were selected. Satisfactory separation was achieved for all three commercial C18 columns with a particle size of 5 µm, and the method had good general usability. In condition 1, 17 commonly used dyes and three less commonly used dyes were assigned to group Ⅰ and separated by HPLC; in condition 2, eight banned dyes and four other less commonly used dyes were assigned to group Ⅱ and separated by HPLC. The HPLC-MS/MS method used 5 mmol/L ammonium acetate aqueous solution-acetonitrile and 5 mmol/L acetic acid aqueous solution-acetonitrile as mobile phases in the positive and negative ion modes, respectively. Multiple reaction monitoring (MRM) was performed for qualitative and quantitative analyses in the electrospray ionization mode. Under the examined conditions, six pairs of isomers were well resolved. For the HPLC and HPLC-MS/MS methods, the relative standard deviations (RSDs) of the intra-day precision and 48 h stability tests were less than 10%. The recoveries were between 82.6% and 114.9% (RSD<10%). In the HPLC method, 32 dyes showed good linearity in an approximate range of 10-500 mg/L (r2>0.99), and the limits of detection (LODs) were 9.7-40.1 µg/g. The linear range of hydroquinone in the HPLC-MS/MS method was 2.0-79.7 mg/L, and the LOD was 8.0 µg/g; the linear ranges of the other components were approximately 0.1-4 mg/L, and the LODs were 0.01-0.4 µg/g. The actual samples were simultaneously measured by HPLC, HPLC-MS/MS, and the standard method. Finally, 16 of the 32 dyes were detected, and the detected contents ranged from 58 to 25160 µg/g. The RSDs of the results obtained from the three detection methods were between 1.9% and 10.1%. All detected components were within the limits of group Ⅰ of this method. In comparison with methods reported in the literature and the standard method, this method covers all components for the routine regulatory inspection of oxidative dyes in cosmetics. The method can separate the commonly used dyes under the same HPLC conditions and avoid interference from 15 other commonly used dyes during the analysis of actual samples. A suitable HPLC-MS/MS confirmatory method was also established for the identification of currently unknown substances in the statutory inspection of cosmetics. The method is simple, rapid, accurate, and specific with general usability and good operability.

A Cu-functionalized MOF and multi-walled carbon nanotube composite modified electrode for the simultaneous determination of hydroquinone and catechol.

Designing MOF-based materials with desired electrochemical activity and high electron conductivity may yield a novel electrochemical sensor that effectively detects various organic pollutants and conducts health monitoring. This study developed a facile and versatile electrochemical sensor for simultaneously monitoring the environmental pollutants hydroquinone (HQ) and catechol (CT). The electrodes are fabricated by modifying a GCE with a Cu-functionalized MOF (UiO-bpydc-Cu) and multi-walled carbon nanotubes (MWCNTs). The Cu-functionalized MOF effectively improved the electronic conductivity by metalating the 2,2'-bipyridyl-derived UiO-bpydc with Cu2+ ions. Moreover, due to the synergic effect, the composite electrode exhibits a significant voltammetric response to HQ's and CT's electro-redox. A rapid and sensitive method of synchronously detecting HQ and CT has been established by differential pulse voltammetry (DPV). The experiments reveal that the linear response ranges were 0.5-565 µM and 1-1350 µM for HQ and CT, respectively, with low detection limits of 0.361 µM and 0.245 µM. The proposed UiO-bpydc-Cu/MWCNTs/GCE electrochemical sensor shows high sensitivity, good anti-interference, reproducibility, and stability. It can also be applied for detecting HQ and CT in actual samples.

Proteomic analysis of Burkholderia zhejiangensis CEIB S4-3 during the methyl parathion degradation process.

Methyl parathion is an organophosphorus pesticide widely employed worldwide to control pests in agricultural and domestic environments. However, due to its intensive use, high toxicity, and environmental persistence, methyl parathion is recognized as an important ecosystem and human health threat, causing severe environmental pollution events and numerous human poisoning and deaths each year. Therefore, identifying and characterizing microorganisms capable of fully degrading methyl parathion and its degradation metabolites is a crucial environmental task for the bioremediation of pesticide-polluted sites. Burkholderia zhejiangensis CEIB S4-3 is a bacterial strain isolated from agricultural soils capable of immediately hydrolyzing methyl parathion at a concentration of 50 mg/L and degrading the 100% of the released p-nitrophenol in a 12-hour lapse when cultured in minimal salt medium. In this study, a comparative proteomic analysis was conducted in the presence and absence of methyl parathion to evaluate the biological mechanisms implicated in the methyl parathion biodegradation and resistance by the strain B. zhejiangensis CEIB S4-3. In each treatment, the changes in the protein expression patterns were evaluated at three sampling times, zero, three, and nine hours through the use of two-dimensional polyacrylamide gel electrophoresis (2D-PAGE), and the differentially expressed proteins were identified by mass spectrometry (MALDI-TOF). The proteomic analysis allowed the identification of 72 proteins with differential expression, 35 proteins in the absence of the pesticide, and 37 proteins in the experimental condition in the presence of methyl parathion. The identified proteins are involved in different metabolic processes such as the carbohydrate and amino acids metabolism, carbon metabolism and energy production, fatty acids ß-oxidation, and the aromatic compounds catabolism, including enzymes of the both p-nitrophenol degradation pathways (Hydroquinone dioxygenase and Hydroxyquinol 1,2 dioxygenase), as well as the overexpression of proteins implicated in cellular damage defense mechanisms such as the response and protection of the oxidative stress, reactive oxygen species defense, detoxification of xenobiotics, and DNA repair processes. According to these data, B. zhejiangensis CEIB S4-3 overexpress different proteins related to aromatic compounds catabolism and with the p-nitrophenol  degradation pathways, the higher expression levels observed in the two subunits of the enzyme Hydroquinone dioxygenase, suggest a preferential use of the Hydroquinone metabolic pathway in the p-nitrophenol degradation process. Moreover the overexpression of several proteins implicated in the oxidative stress response, xenobiotics detoxification, and DNA damage repair reveals the mechanisms employed by B. zhejiangensis CEIB S4-3 to counteract the adverse effects caused by the methyl parathion and p-nitrophenol exposure.

Fe3O4-CuO@Lignite activated coke activated persulfate advanced treatment of phenolic wastewater from coal chemical industry.

In this study, lignite activated coke (LAC) was used as the carrier for the first time, Fe3O4-CuO composite metal oxide was used as the main active material, and the nano-scale magnetic supported composite metal oxide Fe3O4-CuO@LAC catalyst was synthesized for the first time, which can effectively activate the active oxygen in peroxodisulfate (PS). XRD, FTIR, BET, SEM, XPS and other analysis results showed that there was particulate matter with spherical structure on the surface of the active coke, and its diffraction peaks matched well with the characteristic peaks of Fe3O4 and CuO, and it was a mesoporous structure with a specific surface area of 619.090 m2 g-1. By optimizing the experimental conditions, the results showed that more than 92% of hydroquinone can be removed under the conditions of hydroquinone concentration of 50 mg/L, pH = 5, adding 0.1 g/L catalyst and 3 mmol/L PS. EPR and quenching experiments proved that there were four reactive oxygen species in the reaction system ·OH, SO4-·, O2-· and 1O2. According to the degradation products of hydroquinone detected by LC-MS, the possible degradation path was deduced which laid a foundation for solving the problem of difficult treatment of phenol-containing wastewater in coal chemical industry.

Enhancing the electrochemical sensitivity of hydroquinone using a hydrophobic deep eutectic solvent-based carbon paste electrode.

The present study reports the synthesis and characterization of hydrophobic deep eutectic solvents (HDES) based on fatty acids and tetrabutylammonium bromide (TBAB) or 1-octanol using Fourier transform infrared spectroscopy, and the analysis of the physicochemical properties (viscosity, density, electrical conductivity, and water content) of these solvents. A carbon paste electrode modified with 6.0% (m/m) decanoic acid and TBAB-based HDES was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. The oxidation peak currents of the proposed electrode were enhanced by its high electrochemical activity, fast electron transfer rate, and high surface area, while a remarkable decrease was observed in the peak potential separation. The electrochemical determination of hydroquinone (H2Q) was carried out using square-wave adsorptive anodic stripping voltammetry (SWAdASV). The electrode response was found to be linear in the H2Q concentration range of 2.5 × 10-6-3.0 × 10-3 mol L-1, with the limit of detection (LOD) of 7.7 × 10-7 mol L-1. The method was successfully applied for H2Q determination in dermatological creams.

A two-dimensional G-CoP/N,P-co-doped carbon nanowire electrode for the simultaneous determination of hydroquinone and catechol in domestic wastewater.

Hydroquinone (HQ) and catechol (CC) are important chemical raw materials in the modern industry, unfortunately, which are also high toxic phenolic pollutants. So how to achieve highly sensitive and selective determination HQ and CC is the challenge we face. In the present work, we report a facile strategy to obtain nitrogen and phosphorous co-doped glucose-derived carbon coated CoP nanowires (G-CoP/N,P-C NWs), in which nitrilotriacetic acid (NTA) was as the chelating reagent, glucose was as carbon source, and the precursors were subsequently experienced carbonization and phosphorization process. G-CoP/N,P-C NWs can shorten the distance of the electron transport and expand the reaction area, showing the intriguing electronic conductivity and electrocatalytic abilities. An electrochemical phenolic sensor based on G-CoP/N,P-C NWs is fabricated. The as-prepared sensor showcases the good sensing performance for HQ and CC with comparative linearity ranges of 0.8-900 µM (HQ) and 0.6-800 µM (CC), low limits of detections (LODs) of 0.18 µM (S/N = 3) and 0.12 µM (S/N = 3) for HQ and CC, respectively. Notably, it also displays excellent practical application for the recognition of HQ and CC in the rain water, the tap water, the domestic wastewater and the lake water, which may be a promising candidate in environmental water monitoring and drinking water safety.

Three-Dimensional Hierarchical HRP-MIL-100(Fe)@TiO2@Fe3O4 Janus Magnetic Micromotor as a Smart Active Platform for Detection and Degradation of Hydroquinone.

A novel multifunctional Janus magnetic micromotor was designed and constructed by using MIL-100(Fe)@TiO2@Fe3O4 multicore-shells modified with horseradish peroxidase (HRP) as a smart active platform to realize detection and degradation of hydroquinone (HQ). The obtained micromotor showed a unique three-dimensional (3D) hierarchical architecture with highly exposed active sites and could autonomously move at a speed of 140 ± 7.0 µm·s-1 by O2 bubbles generated from the catalytic decomposition of H2O2 fuel. Benefiting from the combination of active self-propulsive motion, high peroxidase-like activity, tuned heterojunctions with matching band structures, and a 3D hierarchical structure, an effective platform involving dynamically sensitive detection and quick removal of HQ from water was established by using the multifunctional HRP-integrated MIL-100(Fe)@TiO2@Fe3O4 Janus micromotor. The proposed multifunctional Janus magnetic micromotor had advantages of simple and feasible fabrication, sensitive detection and effective photo-Fenton degradation of HQ in a wide pH range of 4-7, and magnetic recycling, revealing potential for environmental remediation applications.