Preclinical Evaluation of a Novel 3D-Printed Movable Lumbar Vertebral Complex for Replacement: In Vivo and Biomechanical Evaluation of Goat Model.

PURPOSE: This was an in vivo study to develop a novel movable lumbar artificial vertebral complex (MLVC) in a goat model. The purpose of this study was to evaluate clinical and biomechanical characteristics of MLVC and to provide preclinical data for a clinical trial in the future. METHODS: According to the preoperative X-ray and CT scan data of the lumbar vertebrae, 3D printing of a MLVC was designed and implanted in goats. The animals were randomly divided into three groups: intact, fusion, and nonfusion. In the intact group, only the lumbar vertebrae and intervertebral discs were exposed during surgery. Both the fusion and nonfusion groups underwent resection of the lumbar vertebral body and the adjacent intervertebral disc. Titanium cages and lateral plates were implanted in the fusion group. MLVC was implanted in the nonfusion group. All groups were evaluated by CT scan and micro-CT to observe the spinal fusion and tested using the mechanical tester at 6 months after operation. RESULTS: The imaging results showed that with the centrum, the artificial endplates of the titanium cage and MLVC formed compact bone trabeculae. In the in vitro biomechanical test, the average ROM of L3-4 and L4-5 for the nonfusion group was found to be similar to that of the intact group and significantly higher in comparison to that of the fusion group (P < 0.05). The average ROM of flexion, extension, lateral bending, and rotation in the L2-3 intervertebral space significantly increased in the fusion group compared with the intact group and the nonfusion group (P < 0.001). There were no significant differences in flexion, extension, lateral bending, and rotation between the nonfusion and intact groups (P > 0.05). The average ROM of flexion, extension, lateral bending, and rotation in the L2-5 intervertebral space was not significantly different between the intact group, the fusion group, and the nonfusion group, and there was no statistical significance (P > 0.05). HE staining results did not find any metal and polyethylene debris caused by abrasion. CONCLUSION: In vivo MLVC can not only reconstruct the height and stability of the centrum of the operative segment but also retain the movement of the corresponding segment.

Tributyltin protects against ovariectomy-induced trabecular bone loss in C57BL/6J mice with an attenuated effect in high fat fed mice.

Risk factors for poor bone quality include estrogen loss at menopause, a high fat diet and exposures to drugs/chemicals that activate peroxisome proliferator activated receptor gamma (PPARγ). We previously reported that the PPARγ and retinoid X receptor dual ligand, tributyltin (TBT), repressed periosteal bone formation but enhanced trabecular bone formation in vivo. Here, we examined the interaction of diet, ovariectomy (OVX) and TBT exposure on bone structure. C57BL/6J mice underwent either sham surgery or OVX at 10 weeks of age. At 12 weeks of age, they were placed on a low (10% kcal) or high (45% kcal) fat, sucrose-matched diet and treated with vehicle or TBT (1 or 5 mg/kg) for 14 weeks. OVX increased body weight gain in mice on either diet. TBT enhanced body weight gain in intact mice fed a high fat diet, but decreased weight gain in OVX mice. Elemental tin concentrations increased dose-dependently in bone. TBT had marginal effects on cortical and trabecular bone in intact mice fed either diet. OVX caused a reduction in cortical and trabecular bone, regardless of diet. In high fat fed OVX mice, TBT further reduced cortical thickness, bone area and total area. Interestingly, TBT protected against OVX-induced trabecular bone loss in low fat fed mice. The protective effect of TBT was nullified by the high fat. These results show that TBT protects against trabecular bone loss, even in the presence of a strongly resorptive environment, at an even lower level of exposure than we showed repressed homeostatic resorption.

Recovery of the maternal skeleton after lactation is impaired by advanced maternal age but not by reduced IGF availability in the mouse.

BACKGROUND: Lactation results in substantial maternal bone loss that is recovered following weaning. However, the mechanisms underlying this recovery, and in particular the role of insulin-like growth factor 1 (IGF-I), is not clear. Furthermore, there is little data regarding whether recovery is affected by advanced maternal age. METHODS: Using micro-computed tomography, we studied bone recovery following lactation in mice at 2, 5 and 7 months of age. We also investigated the effects of reduced IGF-I availability using mice lacking PAPP-A2, a protease of insulin-like growth factor binding protein 5 (IGFBP-5). RESULTS: In 2 month old mice, lactation affected femoral trabecular and cortical bone, but only cortical bone showed recovery 3 weeks after weaning. This recovery was not affected by deletion of the Pappa2 gene. The amount of trabecular bone was reduced in 5 and 7 month old mice, and was not further reduced by lactation. However, the recovery of cortical bone was impaired at 5 and 7 months compared with at 2 months. CONCLUSIONS: Recovery of the maternal skeleton after lactation is impaired in moderately-aged mice compared with younger mice. Our results may be relevant to the long-term effects of breastfeeding on the maternal skeleton in humans, particularly given the increasing median maternal age at childbearing.

Feasibility of cortical bone trajectory screws for bridging fixation in revision surgery for lumbar adjacent segment degeneration.

BACKGROUND: To investigate the feasibility of using cortical bone trajectory (CBT) screws for bridging fixation in revision surgery for lumbar adjacent segment degeneration and to provide a reference for clinical practice. METHODS: Computed tomography scans of the lumbar spines of 36 patients in our hospital were used. Sixteen males and 20 females with an average age of 65.5 ±â€Š10.5 years (range: 46 to 83 years) were included. Three-dimensional reconstruction was performed using computer software. Screws with appropriate sizes were selected for the L1 to L5 vertebral segments, and traditional pedicle screws were placed using the standard method. After completing screw placement, simulated placement of CBT screws was performed separately. No overlap occurred between the two screws in the process of CBT screw placement, and the placement point and direction were adjusted until screw placement completion. After all screw placement simulations were complete, according to the contact area of the cortical bone of the screw trajectory and the screw puncture position and distance through the trajectory, the screw placement results were categorized as excellent, good, general, and failure. Excellent and good ratings were considered successful, while a general rating was regarded as acceptable. Then, the success rate and acceptable rate of each segment of the lumbar spine were calculated. RESULTS: Three hundred and sixty screw placement simulations were performed in lumbar pedicles, and 72 CBT screws were implanted in each vertebral body of the lumbar spine. The success rates in the L1 to L5 segments were 73.6%, 80.6%, 83.3%, 88.9%, and 77.8%, respectively, and the acceptable rates were 91.7%, 97.2%, 97.2%, 100%, and 91.7%, respectively. The overall success rate and acceptable rate of CBT screw placement in the lumbar spine were 80.8% and 95.6%, respectively. CONCLUSION: CBT screws are feasible for bridging fixation in lumbar adjacent segment degeneration revision surgery, and the accuracy of screw placement in different lumbar vertebrae varies.

Is There an Association Between Bone Microarchitecture and Fracture in Patients who were Treated for High-grade Osteosarcoma? A Controlled Study at Long-term Follow-up Using High-resolution Peripheral Quantitative CT.

BACKGROUND: Neoadjuvant chemotherapy in patients with primary osteosarcoma improves survival rates, but it also causes side effects in various organs including bone. Low bone mineral density (BMD) can occur owing partly to chemotherapy or limited mobility. This can cause a higher risk of fractures compared with those who do not receive such treatment. Changes in BMD alone cannot explain the propensity of fractures. Studying microarchitectural changes of bone might help to understand the effect. QUESTIONS/PURPOSES: (1) Do patients who were treated for osteosarcoma (more than 20 years previously) have low BMD? (2) Do these patients experience more fractures than controls who do not have osteosarcoma? (3) What differences in bone microarchitecture are present between patients treated for high-grade osteosarcoma and individuals who have never had osteosarcoma? METHODS: We contacted 48 patients who were treated for osteosarcoma and who participated in an earlier study. These patients underwent multimodal treatment including chemotherapy more than 20 years ago. Of the original patient group, 60% (29 of 48) were missing, leaving 40% (19 of 48) available for inclusion in this study; all 19 agreed to participate. There were nine men and 10 women with a mean age of 46 ± 4 years and a mean time from surgery to examination of 28 ± 3 years. BMD was measured by dual-energy x-ray absorptiometry, and any fracture history was assessed using a questionnaire. Additionally, high-resolution peripheral quantitative CT was performed to compare the groups in terms of microarchitectural changes, such as cortical and trabecular area, cortical and trabecular thickness, cortical porosity, and endocortical perimeter. Participants in the control group were selected from a cohort consisting of a population-based random sample of 499 healthy adult women and men. Osteoporosis or low BMD was not an exclusion criterion for entering this study; however, the patients in the control group were selected based on a normal BMD (that is, T score > -1.0 at both the spine and hip). Also, the participants were matched based on age and sex. Differences between patients and controls were assessed using the Wilcoxon rank sum test for continuous variables and a chi-square test for categorical variables. A multiple regression analysis was performed. Model assumptions were checked using histograms and quantile-quantile plots of residuals. RESULTS: Twelve of 19 patients who were treated for osteosarcoma had either osteopenia (eight patients) or osteoporosis (four patients). More patients with osteosarcoma reported sustaining fractures (11 of 19 patients) than did control patients (2 of 19 controls; p < 0.001). Among all microarchitectural parameters, only the endocortical perimeter was increased in patients compared with the control group (75 ± 15 mm versus 62 ± 18 mm; p = 0.04); we found no differences between the groups in terms of cortical and trabecular area, cortical and trabecular thickness, or cortical porosity. CONCLUSION: Although patients who were treated for osteosarcoma had osteopenic or osteoporotic BMD and a higher proportion of patients experienced fractures than did patients in the control group, we could not confirm differences in microarchitectural parameters using high-resolution peripheral quantitative CT. Therefore, it seems that bone geometry and microstructural parameters are not likely the cause of the increased proportion of fractures observed in our patients who were treated for osteosarcoma. Until we learn more about the bone changes associated with chemotherapy in patients with osteosarcoma, we recommend that patients undergo regular BMD testing, and we recommend that physicians consider osteoporosis treatment in patients with low BMD. These data might provide the impetus for future multicenter prospective studies examining the association between chemotherapy and bone microarchitecture. LEVEL OF EVIDENCE: Level III, therapeutic study.

Bone Material Strength Index as Measured by Impact Microindentation is Low in Patients with Primary Hyperparathyroidism.

CONTEXT: In primary hyperparathyroidism (PHPT) bone mineral density (BMD) is typically decreased in cortical bone and relatively preserved in trabecular bone. An increased fracture rate is observed however not only at peripheral sites but also at the spine, and fractures occur at higher BMD values than expected. We hypothesized that components of bone quality other than BMD are affected in PHPT as well. OBJECTIVE: To evaluate bone material properties using impact microindentation (IMI) in PHPT patients. METHODS: In this cross-sectional study, the Bone Material Strength index (BMSi) was measured by IMI at the midshaft of the tibia in 37 patients with PHPT (28 women), 11 of whom had prevalent fragility fractures, and 37 euparathyroid controls (28 women) matched for age, gender, and fragility fracture status. RESULTS: Mean age of PHPT patients and controls was 61.8 ±â€…13.3 and 61.0 ±â€…11.8 years, respectively, P = .77. Calcium and PTH levels were significantly higher in PHPT patients but BMD at the lumbar spine (0.92 ±â€…0.15 vs 0.89 ±â€…0.11, P = .37) and the femoral neck (0.70 ±â€…0.11 vs 0.67 ±â€…0.07, P = .15) were comparable between groups. BMSi however was significantly lower in PHPT patients than in controls (78.2 ±â€…5.7 vs 82.8 ±â€…4.5, P < .001). In addition, BMSi was significantly lower in 11 PHPT patients with fragility fractures than in the 26 PHPT patients without fragility fractures (74.7 ±â€…6.0 vs 79.6 ±â€…5.0, P = .015). CONCLUSION: Our data indicate that bone material properties are altered in PHPT patients and most affected in those with prevalent fractures. IMI might be a valuable additional tool in the evaluation of bone fragility in patients with PHPT.

Interstitial fluid velocity is decreased around cortical bone vascular pores and depends on osteocyte position in a rat model of disuse osteoporosis.

Muscle paralysis induced with botulinum toxin (Botox) injection increases vascular porosity and reduces osteocyte lacunar density in the tibial cortical bone of skeletally mature rats. These morphological changes potentially affect interstitial fluid flow in the lacunar-canalicular porosity, which is thought to play a role in osteocyte mechanotransduction. The aim of this study was to investigate the effects of disuse-induced morphological changes on interstitial fluid velocity around osteocytes in the bone cortex. Micro-CT images from a previous study that quantified the effects of Botox-induced muscle paralysis on bone microarchitecture in skeletally mature rats were used to create high-resolution, animal-specific finite element models that included the vascular pores and osteocyte lacunae within the tibial metaphysis of Botox-injected (BTX, n = 8) and saline-injected control (CTRL, n = 8) groups. To quantify fluid flow, lacunar and canalicular porosities were modeled as fluid-saturated poroelastic materials, and boundary conditions were applied to simulate physiological loading. This modeling approach allowed a detailed quantification of the fluid flow velocities around osteocytes in a relatively large volume of bone tissue. The analysis demonstrated that interstitial fluid velocity at the vascular pore surfaces was significantly lower in BTX compared to CTRL because of the decreased vascular canal separation. No significant differences in average fluid velocity were observed at the osteocyte lacunae and no correlation was found between the fluid velocity and the lacunar density, which was significantly lower in BTX. Instead, the lacunar fluid velocity was dependent on the osteocyte's specific position in the bone cortex and its proximity to a vascular pore.

Consequences of Hyperthyroidism and Its Treatment for Bone Microarchitecture Assessed by High-Resolution Peripheral Quantitative Computed Tomography.

Background: Hyperthyroidism is associated with bone mass reduction and increased fracture risk, but the effects on other important bone parameters have been sparsely examined. Therefore, we investigated bone microarchitecture and estimated bone strength by high-resolution peripheral quantitative computed tomography (HR-pQCT) in hyperthyroid patients at diagnosis and after being euthyroid for at least one year. Methods: Two approaches were used: (A) a case-control study comparing 61 hyperthyroid women with 61 euthyroid women matched for age and menopause status; (B) a follow-up study, in which 46 of the 61 women were re-examined after having been euthyroid for one year. HR-pQCT of the distal radius and tibia, and dual-energy X-ray absorptiometry (DXA) of the lumbar spine and the hip were performed. Results: In analysis A: In the radius, compared with the healthy controls, hyperthyroid patients had higher total area (16.9% ± 29.5%; p < 0.001), trabecular area (28.6% ± 45.7%; p < 0.001), and lower cortical area (-11.7% ± 23.2%; p < 0.001). Total volumetric bone mineral density (vBMD) (-13.9% ± 26.5%; p < 0.001), cortical vBMD (-5.8% ± 7.9%; p < 0.001), cortical thickness (-16.7% ± 26.0%; p < 0.001), and estimated bone strength (-6.6% ± 19.5%; p < 0.01) were lower. No significant differences were found in the tibia or in the DXA parameters. In analysis B: In the radius, significant improvements were observed in the cortical area (2.1% ± 4.6%; p < 0.01), cortical thickness (2.5% ± 5.1%; p < 0.001), and total vBMD (0.8% ± 3.0%; p < 0.05). Trabecular area decreased (-0.5% ± 1.0%; p < 0.01) and trabecular separation increased (2.0% ± 8.3%; p < 0.05). In the tibia, cortical area (3.6% ± 7.3%; p < 0.01) and cortical thickness (3.8% ± 7.6%; p < 0.01) increased, and trabecular area decreased (-0.5% ± 1.1%; p < 0.01). Areal BMD, measured by DXA, increased in the spine (1.1% ± 3.4%; p < 0.05) and in the hip (2.0% ± 3.8%; p < 0.01). Conclusions: Compared with the healthy control group, hyperthyroid women had lower vBMD, lower estimated bone strength, and compromised cortical microarchitecture in the radius. After restoration of euthyroidism, significant improvements in vBMD and cortical microarchitecture were observed, highlighting the importance of achieving and maintaining euthyroidism.

Association between forearm cortical bone properties and handgrip strength in women with distal radius fractures: A cross-sectional study.

OBJECTIVES: Mechanical and biochemical bone properties are influenced by muscles. However, the muscle-bone interaction has not been fully elucidated regarding the upper extremities. The objective of the present study was to evaluate the mechanical muscle-bone interaction at the forearm by evaluating the relationship between the properties of three-dimensional (3D) forearm cortical bone models derived from conventional computed tomography (CT) images and handgrip strength (HGS). METHODS: A total of 108 women (mean age, 75.2 ± 9.4 years; range, 62-101 years) with a distal radius fracture who took conventional CT scans for the assessment of the fracture were included in this study. Distal radius 3D models were reconstructed and the average cortical bone density (Cd) and thickness (Ct) of the region of interest (ROI), which might be affected by the forearm flexor muscles, were calculated using a 3D modeling software. Clinical parameters including HGS, lumbar and hip bone mineral densities (BMDs), and other demographic factors were also obtained. A multivariate linear regression analysis was performed to identify relevant factors associated with HGS. RESULTS: HGS was found to be independently associated with height and Cd, but no significant difference was found between HGS and Ct, age, weight, as well as lumber and hip BMDs. CONCLUSIONS: Cortical bone density might be associated with HGS, which is generated by the forearm flexor muscles. Hence, the mechanical muscle-bone interaction in the upper extremities could be supported by the present study.

Mechanical and histomorphometrical evaluation of false and floating ribs of young adults with idiopathic scoliosis.

PURPOSE: The aim of this paper was to assess the histomorphometrical and mechanical properties of ribs in patients with idiopathic scoliosis who underwent corrective surgery of scoliosis combined with thoracoplasty. METHODS: The analyzed material encompasses 20 females between the ages of 12 and 18, whose pre-operative Cobb angle was 56.85 degrees, on average. The participants were divided into two age groups, up to the age of 15 and above 15 years old, taking into account the anatomical location of the assessed rib fragments with a division into floating and false ribs. The analysis of mechanical parameters was carried out by means of the quasi-static 3-point bending test, and the histomorphometric evaluation of the examined rib fragments was carried out using high-resolution computed tomography. RESULTS: The existence of explicit relationships between selected radiological parameters describing scoliosis and mechanical and histomorphometric parameters of the ribs has not been confirmed. Statistically significant correlations between age and rib stiffness as well as between Young's modulus and stiffness depending on the anatomical location of the examined rib fragment were confirmed. CONCLUSIONS: Mechanical and histomorphometric properties of bone tissue in patients with scoliosis are not explicitly associated with the radiological parameters characterizing scoliosis.

Advanced Modeling Methods-Applications to Bone Fracture Mechanics.

PURPOSE OF REVIEW: The goal of this review is to summarize recent advances in modeling of bone fracture using fracture mechanics-based approaches at multiple length scales spanning nano- to macroscale. RECENT FINDINGS: Despite the additional information that fracture mechanics-based models provide over strength-based ones, the application of this approach to assessing bone fracture is still somewhat limited. Macroscale fracture models of bone have demonstrated the potential of this approach in uncovering the contributions of geometry, material property variation, as well as loading mode and rate on whole bone fracture response. Cortical and cancellous microscale models of bone have advanced the understanding of individual contributions of microstructure, microarchitecture, local material properties, and material distribution on microscale fracture resistance of bone. Nano/submicroscale models have provided additional insight into the effect of specific changes in mineral, collagen, and non-collagenous proteins as well as their interaction on energy dissipation and fracture resistance at small length scales. Advanced modeling approaches based on fracture mechanics provide unique information about the underlying multiscale fracture mechanisms in bone and how these mechanisms are influenced by the structural and material constituents of bone at different length scales. Fracture mechanics-based modeling provides a powerful approach that complements experimental evaluations and advances the understanding of critical determinants of fracture risk.

Effects of mild hyperbaric oxygen on osteoporosis induced by hindlimb unloading in rats.

INTRODUCTION: Disuse-induced bone loss is caused by a suppression of osteoblastic bone formation and an increase in osteoclastic bone resorption. There are few data available for the effects of environmental conditions, i.e., atmospheric pressure and/or oxygen concentration, on osteoporosis. This study examined the effects of mild hyperbaric oxygen at 1317 hPa with 40% oxygen on unloading-induced osteoporosis. MATERIALS AND METHODS: Eighteen 8-week old male Wistar rats were randomly divided into three groups: the control for 21 days without unloading and mild hyperbaric oxygen (NOR, n = 6), the unloading for 21 days and recovery for 10 days without mild hyperbaric oxygen (HU + NOR, n = 6), and the unloading for 21 days and recovery for 10 days with mild hyperbaric oxygen (HU + MHO, n = 6). RESULTS: The cortical thickness and trabecular bone surface area were decreased in the HU + NOR group compared to the NOR group. There were no differences between the NOR and HU + MHO groups. Osteoclast surface area and Sclerostin (Sost) mRNA expression levels were decreased in the HU + MHO group compared to the HU + NOR group. These results suggested that the loss of the cortical and trabecular bone is inhibited by mild hyperbaric oxygen, because of an inhibition of osteoclasts and enhancement of bone formation with decreased Sost expression. CONCLUSIONS: We conclude that exposure to mild hyperbaric oxygen partially protects from the osteoporosis induced by hindlimb unloading.

In Vivo Assessment of Cortical Bone Fragility.

PURPOSE OF REVIEW: This review updates readers on recent developments in the assessment of cortical bone fragility in vivo. The review explains the clinical need that motivated the development of Cortical Bone Mechanics Technology™ (CBMT) as a scientific instrument, its unique capabilities, and its necessary further development as a medical device. RECENT FINDINGS: Clinical experience with dual-energy X-ray absorptiometry has led to calls for new clinical methods for assessing bone health. CBMT is a noninvasive, dynamic 3-point bending test that makes direct, functional measurements of the mechanical properties of cortical bone in ulnas of living people. Its technical validity in accurate measurements of ulna flexural rigidity and its clinical validity in accurate estimations of quasistatic ulna bending strength have been demonstrated. Because CBMT is a whole bone test, its measurements reflect the influences of bone quantity and bone quality at all hierarchical levels.

Prospective Study Evaluating Changes in Bone Quality in Premenopausal Women With Breast Cancer Undergoing Adjuvant Chemotherapy.

BACKGROUND: Ovarian suppression from chemotherapy results in bone loss in premenopausal women with breast cancer (BC). Less is known about bone microarchitecture changes. We used high-resolution peripheral quantitative computed tomography (HR-pQCT) to measure volumetric bone density and trabecular and cortical microarchitecture in this population. MATERIALS AND METHODS: The primary endpoint was to assess changes in cortical thickness and trabecular bone density by HR-pQCT. Premenopausal women with stage I to III BC undergoing adjuvant chemotherapy underwent a bone mineral density (BMD) dual energy x-ray absorptiometry scan and HR-pQCT (voxel size, 82 microns) at baseline and 12 months. Paired t tests were used to observe the change over time in bone microarchitecture and areal and volumetric density. RESULTS: Eighteen patients were evaluated, of which 12 patients had baseline and matched 12-month imaging. The mean age was 45.2 years (range, 35-51 years), 17 (94%) patients had hormone receptor-positive BC, and 16 (89%) initiated tamoxifen. At 12 months, there was a significant decrease in femoral neck (P < .05) and lumbar spine and total hip (P < .01) BMD. Changes detected by HR-pQCT at 12 months included significant decreases in cortical thickness and area at the tibia (P < .05), and total and cortical volumetric BMD at the radius and tibia (P < .01), as well as an increase in tibial trabecular area (P < .05). CONCLUSION: Premenopausal women undergoing chemotherapy experience BMD decline and trabecular and cortical bone microarchitecture deterioration. In this population, future efforts should focus on therapy-induced bone loss and optimizing bone density-related management.

Effect of cortical bone micro-structure in fragility fracture patients on lamellar stress.

This work investigates how changes in cortical bone microstructure alter the risk of fragility fractures. The secondary osteons of non-osteoporotic (by DXA) women with fragility fractures have reduced lamellar width and greater areas of birefringent brightness in transverse sections, a pathological condition. We used hierarchical finite element (FE) models of the proximal femur of two women aged 67 and 88 (younger and older) during one-legged stance. At specific locations of the anterior-inferior neck (ROI), we analyzed micro-models containing osteons comprised of alternating birefringent extinct and bright lamellae. The plane of lamellar isotropy (XY) was transverse to the osteon longitudinal axis (Z) which was parallel to the femoral neck axis. To evaluate changes in fracture risk with changes in microstructure, we investigated principal and von Mises stresses, and planar stress measures that accounted for transverse isotropy. For both younger and older femurs, 48% to 100% of stress measures were larger in models with healthy architecture than in models with pathological architecture, while controlling for type of lamella and osteon. These findings suggest that bone adaptation reduces stress at most pathological lamellar sites. However, in the bright lamellae of the younger femur, the pathological tensile, compressive and distortional stresses in the transverse plane and distortional stress in the longitudinal planes were larger than the non-negligible corresponding stresses in 6 of the 28 osteon models with healthy architecture, in 5 of the 7 locations. Therefore, a minority of sites with pathological architecture present greater stress, and therefore, greater fracture risk.

A comparison of the bone and growth phenotype of mdx, mdx:Cmah-/- and mdx:Utrn+/- murine models with the C57BL/10 wild-type mouse.

The muscular dystrophy X-linked (mdx) mouse is commonly used as a mouse model of Duchenne muscular dystrophy (DMD). Its phenotype is, however, mild, and other mouse models have been explored. The mdx:Cmah-/- mouse carries a human-like mutation in the Cmah gene and has a severe muscle phenotype, but its growth and bone development are unknown. In this study, we compared male mdx, mdx:Utrn+/-, mdx:Cmah-/- and wild-type (WT) mice at 3, 5 and 7 weeks of age to determine the suitability of the mdx:Cmah-/- mouse as a model for assessing growth and skeletal development in DMD. The mdx:Cmah-/- mice were lighter than WT mice at 3 weeks, but heavier at 7 weeks, and showed an increased growth rate at 5 weeks. Cortical bone fraction as assessed by micro-computed tomography was greater in both mdx and mdx:Cmah-/- mice versus WT mice at 7 weeks. Tissue mineral density was also higher in mdx:Cmah-/- mice at 3 and 7 weeks. Gene profiling of mdx:Cmah-/- bone identified increased expression of Igf1, Igf1r and Vegfa Both the mdx and mdx:Cmah-/- mice showed an increased proportion of regulated bone marrow adipose tissue (BMAT) but a reduction in constitutive BMAT. The mdx:Cmah-/- mice show evidence of catch-up growth and more rapid bone development. This pattern does not mimic the typical DMD growth trajectory and therefore the utility of the mdx:Cmah-/- mouse for studying growth and skeletal development in DMD is limited. Further studies of this model may, however, shed light on the phenomenon of catch-up growth.This article has an associated First Person interview with the first author of the paper.

Effects of Diabetes on Bone Material Properties.

PURPOSE OF REVIEW: Individuals with type 1 and type 2 diabetes mellitus (T1DM, T2DM) have an increased risk of bone fracture compared to non-diabetic controls that is not explained by differences in BMD, BMI, or falls. Thus, bone tissue fracture resistance may be reduced in individuals with DM. The purpose of this review is to summarize work that analyzes the effects of T1DM and T2DM on bone tissue compositional and mechanical properties. RECENT FINDINGS: Studies of clinical T2DM specimens revealed increased mineralization and advanced glycation endproduct (AGE) concentrations and significant relationships between mechanical performance and composition of cancellous bone. Specifically, in femoral cancellous tissue, compressive stiffness and strength increased with mineral content; and post-yield properties decreased with AGE concentration. In addition, cortical resistance to in vivo indentation (bone material strength index) was lower in patients with T2DM vs. age-matched non-diabetic controls, and this resistance decreased with worsening glycemic control. Recent studies on patients with T1DM and history of a prior fragility fracture found greater mineral content and concentrations of AGEs in iliac trabecular bone and correspondingly stiffer, harder bone at the nanosacle. Recent observational data showed greater AGE and mineral content in surgically retrieved bone from patients with T2DM vs. non-DM controls, consistent with reduced bone remodeling. Limited data on human T1DM bone tissue also showed higher mineral and AGE content in patients with prior fragility fractures compared to non-DM and non-fracture controls.

Differential Modulation of Cancellous and Cortical Distal Femur by Fructose and Natural Mineral-Rich Water Consumption in Ovariectomized Female Sprague Dawley Rats.

Bone mineral density (BMD) and microstructure depend on estrogens and diet. We assessed the impact of natural mineral-rich water ingestion on distal femur of fructose-fed estrogen-deficient female Sprague Dawley rats. Ovariectomized rats drank tap or mineral-rich waters, with or without 10%-fructose, for 10 weeks. A sham-operated group drinking tap water was included (n = 6/group). Cancellous and cortical bone compartments were analyzed by microcomputed tomography. Circulating bone metabolism markers were measured by enzyme immunoassay/enzyme-linked immunosorbent assay or multiplex bead assay. Ovariectomy significantly worsened cancellous but not cortical bone, significantly increased circulating degradation products from C-terminal telopeptides of type I collagen and receptor activator of nuclear factor-kappaB ligand (RANKL), and significantly decreased circulating osteoprotegerin and osteoprotegerin/RANKL ratio. In ovariectomized rats, in cancellous bone, significant water effect was observed for all microstructural properties, except for the degree of anisotropy, and BMD (neither a significant fructose effect nor a significant interaction between water and fructose ingestion effects were observed). In cortical bone, it was observed a significant (a) water effect for medullary volume and cortical endosteal perimeter; (b) fructose effect for cortical thickness, medullary volume, cross-sectional thickness and cortical endosteal and periosteal perimeters; and (c) interaction effect for mean eccentricity. In blood, significant fructose and interaction effects were found for osteoprotegerin (no significant water effect was seen). For the first time in ovariectomized rats, the positive modulation of cortical but not of cancellous bone by fructose ingestion and of both bone locations by natural mineral-rich water ingestion is described.

Functional disuse initiates medullary endosteal micro-architectural impairment in cortical bone characterized by nanoindentation.

In this study, we evaluated the effect of functional disuse-induced bone remodeling on its mechanical properties, individually at periosteum and medullary endosteum regions of the cortical bone. Left middle tibiae were obtained from 5-month-old female Sprague-Dawley rats for the baseline control as well as hindlimb suspended (disuse) groups. Micro-nano-mechanical elastic moduli (at lateral region) was evaluated along axial (Z), circumferential (C) and radial (R) orientations using nanoindentation. Results indicated an anisotropic microstructure with axial orientation having the highest and radial orientation with the lowest moduli at periosteum and medullary endosteum for both baseline control as well as disuse groups. Between the groups: at periosteum, an insignificant difference was evaluated for each of the orientations (p > 0.05) and at endosteum, a significant decrease of elastic moduli in the radial (p < 0.0001), circumferential (p < 0.001) and statistically insignificant difference in axial (p > 0.05) orientation. For the moduli ratios between groups: at periosteum, only significant difference in the Z/R (p < 0.05) anisotropy ratio, whereas at endosteum, a statistically significant difference in Z/C (p < 0.001), and Z/R (p < 0.001), as well as C/R (p < 0.05) anisotropy ratios, was evaluated. The results suggested initial bone remodeling impaired bone micro-architecture predominantly at the medullary endosteum with possible alterations in the geometric orientations of collagen and mineral phases inside the bone. The findings could be significant for studying the mechanotransduction pathways involved in maintaining the bone micro-architecture and possibly have high clinical significance for drug use against impairment from functional disuse.

Cortical and Trabecular Bone Fracture Characterisation in the Vertebral Body Using Acoustic Emission.

The ability to rapidly detect localised fractures of cortical and/or trabecular bone sustained by the vertebral body would enhance the analysis of vertebral fracture initiation and propagation during dynamic loading. In this study, high rate axial compression tests were performed on twenty sets of three-vertebra lumbar spine specimens. Acoustic Emission (AE) sensor measurements of sound wave pressure were used to classify isolated trabecular fractures and severe compressive fractures of vertebral body cortical and trabecular bone. Fracture detection using standard AE parameters was compared to that of traditional mechanical parameters obtained from load cell and displacement readings. Results indicated that the AE parameters achieved slightly enhanced classification of isolated trabecular fractures, whereas the mechanical parameters better identified combined fractures of cortical and trabecular bone. These findings demonstrate that AE may be used to promptly and accurately identify localised fractures of trabecular bone, whereas more extensive fractures of the vertebral body are best identified by load cell readings due to the considerable loss in compressive resistance. The discrimination thresholds corresponding to the AE parameters were based on calibrated measurements of AE wave pressure and may ultimately be used to examine the onset and progression of vertebral fracture in other loading scenarios.