Correlation of spheno-occipital synchondrosis and mandibular condylar cortication with chronological age using computed tomography in Indian population- A cross-sectional study.

BACKGROUND: Forensic age estimation is a procedure which utilises many methods to estimate the age of both living and deceased individuals, including those who have died in natural disasters or man-made catastrophes. The pattern and closure of spheno-occipital synchondrosis (SOS) fusion, along with subchondral ossification of the mandibular condyle, can be used to estimate age. AIM AND OBJECTIVES: This study aims to estimate age using computed tomographic (CT) images of spheno-occipital synchondrosis fusion (SOS) and mandibular condylar cortication (MCC), and to correlate these findings with chronological age. MATERIALS AND METHODS: The present study included 435 CT images of individuals aged 10-25 years. SOS fusion was assessed using a four-stage system, and MCC was assessed bilaterally using a three-stage system on the sagittal plane. Data on fusion stages and cortication types were entered along with chronological age, and then statistically analysed. RESULTS: SOS fusion stage 2 occurred at similar age in males (19.82 ± 2.67 years) and females (19.23 ± 2.93 years). Earlier fusion of other stages was observed in females by a mean age of 2 years. MCC was completed 1 year earlier in females, with statistically significant differences (p ≤ 0.001). When comparing cortication types and different fusion stages, only type II cortication showed statistically significant differences compared to different fusion stages (p ≤ 0.001). CONCLUSION: Mandibular condylar cortication (MCC) and spheno-occipital synchondrosis (SOS) fusion were positively correlated with chronological age, suggesting that these parameters can be used as an adjunct method for age estimation.

Redefining Diagnostic Criteria for Basilar Invagination Using Linear Craniometric Parameters.

AIM: To establish the diagnosis of basilar invagination (BI) on the basis of specific bony landmarks Klaus' index (KI), perpendicular distance between the tip of the odontoid process and palato internal occipital protuberance (PI) line. MATERIAL AND METHODS: Forty-nine patients were analysed, who underwent surgery for BI, between July 2020 and June 2023. Radiological assessment was done in all the patients using reconstructed midsagittal images on computed tomography scans . RESULTS: Mean age was 34.82 ± 10.52 years with male preponderance (67.35%) in patients with BI. We also analysed randomly selected 120 control subjects (male: female = 59:61) with mean age 43.5 ± 14.08 years. The mean distance of tip of the odontoid process from PI line in patients with BI was 3.39 ± 3.09 mm. The mean value of KI in the patients with BI was 28.57 ± 1.68 mm. Receiver operating characteristic (ROC)curve was used for analysing the distance of the tip of the odontoid process from PI line in the patients with BI which produced area under curve( AUC) of 0.97 (confidence interval [CI] -0.931 to 0.990, p < 0.0001). Cut-off point of 7.5 mm was identified for the distance of tip of odontoid process from PI line with sensitivity of 89.8% and specificity of 97.5% having 95.27% diagnostic accuracy for BI. ROC curve analysis of value of KI for the diagnosis of BI produced AUC of 1( CI: 0.978 to 1.000, p < 0.0001). Cut-off value of 33.2 mm for KI was identified for diagnosing BI with 100% accuracy. CONCLUSION: The distance of tip of the odontoid process from PI line < 7.5 mm and value of KI < 33.2 mm, both of these parameters can diagnose BI with comparable accuracy to most widely used conventional radiological methods.

Endoscopic Endonasal Occipitocervical Fixation with a Customized Three-Dimensional Printed Titanium Plate-Screw Construct: A Cadaveric Feasibility Study.

OBJECTIVE: To evaluate the feasibility of a novel method for occipitocervical fixation (OCF) through the endonasal corridor. METHODS: Thin-cut computed tomography scans were obtained for 5 cadaveric specimens. Image segmentation was used to reconstruct 3D models of each O-C1 joint complex. Using computer-aided design software, plates were custom-designed to span each O-C1 joint, sit flush onto the bony surface, and accommodate screws. The final models were 3D-printed in titanium. For implantation, specimens were held in pin-fixation and registered to neuronavigation. A rigid 0º endoscope was used for endonasal visualization. An inverted U-shaped nasopharyngeal flap was raised to expose the occipital condyles and C1. The plates were introduced and fixed with bone screws. Computed tomography scans were obtained to assess screw accuracy and proximity to critical neurovascular structures. Screw entry points and trajectories were recorded. RESULTS: Endonasal OCF was performed on 5 cadaveric specimens. The mean starting point for occipital condyle screws was 6.17 mm lateral and 5.38 mm rostral to the medial O-C1 joint. Mean axial and sagittal trajectories were 7.98° and 6.71°, respectively. The mean starting point for C1 screws was 16.11 mm lateral to the C1 anterior tubercle and 6.39 mm caudal to the medial O-C1 joint. Mean axial and sagittal trajectories were 10.97° and -9.91°, respectively. CONCLUSIONS: Endonasal OCF is technically and anatomically feasible. The application of this technique may allow for same-stage endonasal decompression and fixation, offering a minimally invasive alternative to current methods of fixation and advancing surgeons' ability to treat pathology of the craniovertebral junction. Next steps will focus on biomechanical testing.

The Frequency of Occipital Spurs in Relation to the Cephalic Index: An Anatomorphometric Cone Beam CT Study.

BACKGROUND: The occipital spur (OS) can be described as an abnormal elongation of the external occipital protuberance (EOP). The cephalic index (CI) refers to the ratio of width to length in any skull. AIM: The aim of the present study was to evaluate the frequency and types of OS. It also aimed to determine the mean CI and the distribution of skull types using cone beam computed tomography (CBCT). And to determine if there was a relationship between the cephalic index and the presence and types of OS. METHODS: CBCT scans from 523 patients were included in the study. OSs were classified as type 1 (flat), type 2 (crest), and type 3 (spine). Skull length and width were measured on axial sections and the CI was calculated. Based on the cephalic index (CI), skull types were classified as dolichocephalic (CI < 75), mesocephalic (75 < CI < 80), brachycephalic (80 < CI < 85), and hyperbrachycephalic (CI > 85). RESULTS: The most common cranial types in the study group were brachycephalic (44.7%), mesocephalic (28.3%), hyperbrachycephalic (21.2%), and dolichocephalic (5.7%). Regarding the presence of OS, 54.3% of the participants had no OS, 23.1% had flat type, 15.3% had crest type, and 7.2% had spin type OS. There was a statistically significant difference (P < 0.05) in the frequency of OS according to skull type. CONCLUSION: This study, the first to evaluate CI and OS using CBCT, concludes that brachycephaly is the most common cranial type. OS is more common in mesocephalic and dolichocephalic skulls, at older ages, and in males.

Computed Tomography-Based Occipital Condyle Morphometric Analysis in the Turkish Population: A Trajectory Analysis for Optimal Screw Selection.

AIM: To provide a comprehensive analysis for accurate screw size selection and insertion angle during surgical procedures. MATERIAL AND METHODS: In this retrospective study, a total of 120 patients participated, resulting in the analysis of 240 occipital condyles using coronal, sagittal, and axial planes on CT scans. Statistical evaluation was performed using the Wilcoxon rank-sum test, with p < 0.05 considered statistically significant. RESULTS: The mean sagittal length and height were measured at 17.2 ± 1.7 mm and 9.1 ± 1.5 mm, respectively. The average condyle angle, a crucial factor for screw insertion, was assessed at 38.0 ± 5.5 mm in length, 19.6 ± 2.6 mm in width, and 9.5 ± 1.0 mm in height. Condyle height in the anterior and posterior hypoglossal canals was measured at 10.8 ± 1.4 mm and 9.0 ± 1.4 mm, respectively. Screw angle and condyle width were statistically smaller in females compared to the male population. CONCLUSION: The OC is a significant anatomical structure in the craniovertebral junction, playing a crucial role in stability. The obtained morphological values are applicable to the Turkish population and offer statistically significant findings for preoperative planning involving occipital condyle screw instrumentation.

A calvarial osteolytic lesion of probable vascular origin in a Maya juvenile from the Classic Period ( 250-900 CE).

OBJECTIVE: This case study evaluates a focal osteolytic lesion in the right sulcus sinus transversi of an isolated os occipitale. MATERIALS: The os occipitale is from a juvenile from the Cueva de Sangre at the Classic Period (250-900 CE) site of Dos Pilas, Guatemala METHODS: The lesion was examined macroscopically, microscopically, and radiographically. RESULTS: The oval lesion has a well-circumscribed margin, endocranial origin, and involves cortical destruction of the inner and outer tables. Subperiosteal bone reaction around the lesion is present on the ectocranial surface. Skeletal evidence of increased vascularity, diploë expansion, and perimortem fracture near the lesion are not observed. CONCLUSIONS: The lesion appears to reflect a response to the presence of an expansile process that has caused pressure erosion. The anatomical location of the lesion and the endocranial origin suggest a probable vascular anomaly, such as a vascular malformation. SIGNIFICANCE: This case study represents one of the few bioarchaeological evaluations of probable vascular anomaly in a juvenile. As such, it expands our knowledge about vascular anomalies in the past and provides a comparative and core reference for guiding future paleopathological investigations on cranial osteolytic lesions. LIMITATIONS: The skeletal assemblage is commingled and fragmentary preventing the assessment of the distribution of lesions across the skeleton. SUGGESTIONS FOR FUTURE RESEARCH: Further scrutiny of bioarchaeological collections is needed to better understand the distribution of vascular anomalies in the past.

Anatomical determinants of occipitocervical fusion in skull base chordoma resection: a systematic review of the literature with illustrative cases.

OBJECTIVE: Skull base chordomas are rare, locally osseo-destructive lesions that present unique surgical challenges due to their involvement of critical neurovascular and bony structures at the craniovertebral junction (CVJ). Radical cytoreductive surgery improves survival but also carries significant morbidity, including the potential for occipitocervical (OC) destabilization requiring instrumented fusion. The published experience on OC fusion after CVJ chordoma resection is limited, and the anatomical predictors of OC instability in this context remain unclear. METHODS: PubMed and Embase were systematically searched according to the PRISMA guidelines for studies describing skull base chordoma resection and OC fusion. The search strategy was predefined in the authors' PROSPERO protocol (CRD42024496158). RESULTS: The systematic review identified 11 surgical case series describing 209 skull base chordoma patients and 116 (55.5%) who underwent OC instrumented fusion. Most patients underwent lateral approaches (n = 82) for chordoma resection, followed by midline (n = 48) and combined (n = 6) approaches. OC fusion was most often performed as a second-stage procedure (n = 53), followed by single-stage resection and fusion (n = 38). The degree of occipital condyle resection associated with OC fusion was described in 9 studies: total unilateral condylectomy reliably predicted OC fusion regardless of surgical approach. After lateral transcranial approaches, 4 studies cited at least 50%-70% unilateral condylectomy as necessitating OC fusion. After midline approaches-most frequently the endoscopic endonasal approach (EEA)-at least 75% unilateral condylectomy (or 50% bilateral condylectomy) led to OC fusion. Additionally, resection of the medial atlantoaxial joint elements (the C1 anterior arch and tip of the dens), usually via EEA, reliably necessitated OC fusion. Two illustrative cases are subsequently presented, further exemplifying how the extent of CVJ bony elements removed via EEA to achieve complete chordoma resection predicts the need for OC fusion. CONCLUSIONS: Unilateral total condylectomy, 50% bilateral condylectomy, and resection of the medial atlantoaxial joint elements were the most frequently described independent predictors of OC fusion in skull base chordoma resection. Additionally, consistent with the occipital condyle harboring a significantly thicker joint capsule at its posterolateral aspect, an anterior midline approach seems to tolerate a greater degree of condylar resection (75%) than a lateral transcranial approach (50%-70%) prior to generating OC instability.

Predicting the Need for Occipitocervical Fusion for Patients with Lower Clival Chordoma: A Single-Center Retrospective Study.

OBJECTIVE: To assess the impact of tumor extension into the occipital condyle (OC) in lower clival chordoma management and the need for occipito-cervical fusion (OCF). METHODS: A retrospective analysis was conducted on 35 patients with lower clival chordoma. The preoperative area of the intact OCs, Hounsfield units, and the integrity of the apical ligament and the tectorial membrane were assessed using preoperative imaging. RESULTS: Seven (20%) patients were in the OCF group. The OCF group exhibited a higher prevalence of preoperative pain in the neck or head (P = 0.006), ligament absence (P = 0.022), and increased propensity for postoperative wound issues (P = 0.022) than the non-OCF group. The OCF group had less intact OCs (P < 0.001) and higher spinal instability neoplastic score (P = 0.002) than the non-OCF group. All patients with intact OCs < 60% underwent OCF, and those with OCs ≥ 70% were treated without OCF. Those with OCs between 60% and 69% underwent OCF if the ligaments were eroded, and did not undergo OCF if the ligaments were intact. Treatment strategies varied, with endoscopic endonasal approach alone being common. Radiation therapy was administered to 89% of patients. All 3 patients treated with OCF after tumor resection had wound issues; none treated with OCF before resection had wound issues. None developed atlanto-occipital instability. Survival rates did not significantly differ between groups. CONCLUSIONS: In the absence of mobility-related neck pain, patients with lower clival chordoma and intact OC ≥ 60%, intact apical ligament, and intact tectorial membrane, may not require OCF.

The role of occipital condyle and atlas anomalies on occipital cervical fusion outcomes in Chiari malformation type I with syringomyelia: a study from the Park-Reeves Syringomyelia Research Consortium.

OBJECTIVE: Congenital anomalies of the atlanto-occipital articulation may be present in patients with Chiari malformation type I (CM-I). However, it is unclear how these anomalies affect the biomechanical stability of the craniovertebral junction (CVJ) and whether they are associated with an increased incidence of occipitocervical fusion (OCF) following posterior fossa decompression (PFD). The objective of this study was to determine the prevalence of condylar hypoplasia and atlas anomalies in children with CM-I and syringomyelia. The authors also investigated the predictive contribution of these anomalies to the occurrence of OCF following PFD (PFD+OCF). METHODS: The authors analyzed the prevalence of condylar hypoplasia and atlas arch anomalies for patients in the Park-Reeves Syringomyelia Research Consortium database who underwent PFD+OCF. Condylar hypoplasia was defined by an atlanto-occipital joint axis angle (AOJAA) ≥ 130°. Atlas assimilation and arch anomalies were identified on presurgical radiographic imaging. This PFD+OCF cohort was compared with a control cohort of patients who underwent PFD alone. The control group was matched to the PFD+OCF cohort according to age, sex, and duration of symptoms at a 2:1 ratio. RESULTS: Clinical features and radiographic atlanto-occipital joint parameters were compared between 19 patients in the PFD+OCF cohort and 38 patients in the PFD-only cohort. Demographic data were not significantly different between cohorts (p > 0.05). The mean AOJAA was significantly higher in the PFD+OCF group than in the PFD group (144° ± 12° vs 127° ± 6°, p < 0.0001). In the PFD+OCF group, atlas assimilation and atlas arch anomalies were identified in 10 (53%) and 5 (26%) patients, respectively. These anomalies were absent (n = 0) in the PFD group (p < 0.001). Multivariate regression analysis identified the following 3 CVJ radiographic variables that were predictive of OCF occurrence after PFD: AOJAA ≥ 130° (p = 0.01), clivoaxial angle < 125° (p = 0.02), and occipital condyle-C2 sagittal vertical alignment (C-C2SVA) ≥ 5 mm (p = 0.01). A predictive model based on these 3 factors accurately predicted OCF following PFD (C-statistic 0.95). CONCLUSIONS: The authors' results indicate that the occipital condyle-atlas joint complex might affect the biomechanical integrity of the CVJ in children with CM-I and syringomyelia. They describe the role of the AOJAA metric as an independent predictive factor for occurrence of OCF following PFD. Preoperative identification of these skeletal abnormalities may be used to guide surgical planning and treatment of patients with complex CM-I and coexistent osseous pathology.

Clinical Diagnosis and Treatment of 43 Cases of Occipital Condylar Fractures: A Single-Center Retrospective Study.

OBJECTIVE: This study aimed to examine the mechanism of occipital condyle fractures (OCFs), their clinical symptoms, computer tomography (CT) scan findings, treatment options, and classification. METHODS: A retrospective analysis was conducted on 43 patients with OCFs who were admitted to our neurosurgery center between 2017 and 2023. RESULTS: The investigation covered their clinical symptoms, CT scan results, and treatment outcomes. It was found that 25.6% of the patients suffered from severe craniocerebral injuries with Glasgow Coma Scale (GCS) scores of 3-8 points, 9.3% had moderate injuries with GCS scores of 9-12 points, and 65.1% exhibited mild injuries with GCS scores of 13-15 points. Of these patients, 90.7% showed improvement upon discharge, 4.7% succumbed to their injuries, and another 4.7% developed paraplegia. Symptoms indicative of OCF in individuals with CCJ injuries included neck pain, swelling, cranial nerve palsy, and posterior pharyngeal wall swelling. Frequently observed complications in OCF patients included cerebral contusion, occipital bone fractures, and skull base fractures. Employing thin-layer CT scans of the CCJ area, along with sagittal and coronal CT reconstructions, is essential for identifying OCFs. The fractures were classified into 3 types based on the Anderson-Montesano classification, which, when modified, provides enhanced treatment guidance. CONCLUSIONS: OCFs are predominantly present in cases of high-energy trauma, with high-resolution thin-layer CT scans serving as the preferred diagnostic method. The application of the modified Anderson-Montesano classification, distinguishing between stable and unstable fractures, facilitates the determination of suitable treatment strategies. Stable OCFs can be managed using a rigid neck brace, while unstable OCFs may require Halo-vest frame fixation or surgical intervention.

Feasibility of spheno-occipital synchondrosis fusion stages as an indicator for the assessment of maxillomandibular growth: A mixed longitudinal study.

OBJECTIVES: This study aimed to assess the relative growth rates (RGRs) of the maxilla and mandible at varying fusion stages of the spheno-occipital synchondrosis (SOS), thereby elucidating the potential of SOS stages in predicting maxillomandibular growth. MATERIALS AND METHODS: A total of 320 subjects (171 boys and 149 girls), aged 6 to 18 years, were retrospectively included. Each subject had a minimum of two longitudinal cone-beam computed tomography (CBCT) images, with no more than one interval of SOS fusion stage change between the two scans. Subjects were categorized based on their SOS fusion stages and genders. The RGRs of the maxilla and mandible at various SOS fusion stages were measured and compared using longitudinal CBCT images. RESULTS: Significant statistical differences were observed in maxillomandibular RGRs across various SOS fusion stages. In girls, the sagittal growth of the maxilla remained stable and active until SOS 3, subsequently exhibited deceleration in SOS 4-5 (compared to SOS 3-4, P < .05) and continued to decrease in SOS 5-6. Whereas in boys, the sagittal growth of the maxilla remained stable until SOS 4, and a deceleration trend emerged starting from SOS 5 to 6 (P < .01 compared to SOS 4-5). Mandibular growth patterns in both genders exhibited a progression of increasing-accelerating-decelerating rates from SOS 2 to 6. The highest RGRs for total mandibular length were observed in SOS 3-4 and SOS 4-5. CONCLUSION: Spheno-occipital synchondrosis fusion stages can serve as a valid indicator of maxillomandibular growth maturation.

Occipital bone defect caused by neurofibromatosis type I: A case report.

RATIONALE: The synergistic effect between nonmalignant lesions can also cause a serious impact on patient survival. This disease involves different organ systems and presents with a variety of clinical manifestations, such as schwannoma, depigmentation, low-grade glioma, and skeletal abnormalities. We report a case of type I neurofibromatosis with an occipital bone defect. PATIENT CONCERNS: We report a case of a 50-year-old man with type I neurofibromatosis with occipital bone defect. DIAGNOSIS: The patient was accepted by the local hospital due to sudden right upper limb weakness accompanied by jitter without recognizable cause or inducement. A computerized tomography scan at a local hospital suggested subcutaneous neurofibromatosis with a left occipital cranial defect with thinning bone. On admission physical examination, diffuse multiple masses could be seen throughout the body and head of different sizes and composed of soft and tough textures. The largest one was located in the posterior occipital bone, approximately 8*8 cm in size, with a child tumor and tough texture. Multiple café-au-lait spots could be found on the chest and back, and multiple freckles can be seen in the armpit. The patient underwent surgery. Postoperative pathology showed a spindle cell tumor, which was determined to be neurofibromatosis type I according to immunopathology and clinical data. INTERVENTIONS: The patient was admitted for surgical treatment. During the operation, the scalp mass was completely abducted and the tumor tissue at the skull defect was sharply separated. Postoperative pathology showed that the peripheral margin and the bottom margin were cleaned. OUTCOMES: Computerized tomography and magnetic resonance imaging showed that the tumor was completely. There were not any surgical complications. The patient recovered well, was cured and was dismissed from the hospital. LESSONS: The synergistic effect between nonmalignant lesions can also cause a serious impact on patient survival to encourage early medical intervention. The clinical presentation of neurofibromatosis type I am usually nonmalignant, and in this case, involvement of the skull with bone defect is very rare. Therefore, it is necessary to accumulate relevant cases, reveal the pathogenesis of the disease, predict the development and outcome, and provide more evidence for early therapeutic intervention of similar patients in the future.

Modified interfacet technique using shaped autologous occipital bone mass for basilar invagination.

PURPOSE: In economically undeveloped areas, surgery for basilar invagination (BI) is still a serious economic burden for people. This study introduces a modified interfacet technique for the treatment of BI using shaped autologous occipital bone mass to reduce BI and to save economical expenditure. METHODS: The data of 6 patients with BI who underwent modified interfacet technique using shaped autologous occipital bone mass in our hospital from April 2020 to February 2021 were retrospectively analyzed. During the operation, osteotomy at the external occipital protuberance was performed using ultrasonic osteotome, followed by interfacet release and implantation of shaped autologous occipital bone mass to complete vertical reduction. The atlantodental interval (ADI), Chamberlain's line violation (CLV), clivo-axial angle (CXA) and cervico-medullary angle (CMA) were compared before and after surgery. Additionally, we observed implant stability during the follow-up period to assess the long-term success of the modified interfacet technique. RESULTS: The surgical procedure was successful in all six patients, with no reported incidents of vascular injury, spinal cord injury, or dural tear. Following the operation, improvements were observed in the ADI, CLV, CXA, and CMA. Throughout the follow-up period, the implants remained stable, demonstrating no complications such as bone resorption of the autologous occipital bone mass, implant fracture, or displacement. CONCLUSION: The utilization of shaped autologous occipital bone mass in atlantoaxial interfacet bone grafting has demonstrated effectiveness and feasibility. This technique offers simplicity, ease of preparation, and cost-effectiveness, making it a viable option for treating BI.

Extreme Lateral Approach to the Craniocervical Junction, Operative Technique and Approach Essentials: 2-Dimensional Operative Video.

INDICATIONS CORRIDOR AND LIMITS OF EXPOSURE: The extreme lateral approach is useful for both extradural and intradural anterior and anterolateral lesions at the lower clivus down to the level of C2. ANATOMIC ESSENTIALS NEED FOR PREOPERATIVE PLANNING AND ASSESSMENT: The patient is evaluated with MRI, computed tomography (CT), and an angiogram. Special attention is given to vascular (vertebral artery course, dominance, tumor feeders) and bony (occipital condyle, jugular tubercle, foramen magnum and extent of bony involvement) anatomy. ESSENTIALS STEPS OF THE PROCEDURE: The patient is positioned lateral with the head flexed and tilted down without axial rotation. A hockey-stick incision is performed, and the myocutaneous flap is raised. A retrocondylar craniectomy is performed. The extradural vertebral artery is exposed for proximal control. A C1 hemilaminectomy is performed. Cephalad/caudal exposure and drilling of the occipital condyle are determined per case. The dura is opened, and the vertebral artery is released at the dural entry point to facilitate the tumor removal. The tumor is debulked and delivered inferoventrally away from the neuroaxis and cranial nerves. After removing the tumor, the dura is closed using an allograft.The patients consented to the procedure and to the publication of their images. PITFALLS/AVOIDANCE OF COMPLICATIONS: • Cranial nerve deficits• Craniocervical instability• Postoperative hydrocephalus• Postoperative pseudomeningocele. VARIANTS AND INDICATIONS FOR THEIR USE: A transmastoid extension of the craniectomy allows access further rostrally in the clivus. For C1-2 chordomas, the approach is extended inferiorly, and the vertebral artery is mobilized out of the C1-2 transverse foramina. For tumors involving the joints, an occipitocervical stabilization is required.Images in video reused with permission as follows: image at 00:16 from Revuelta Barbero et al, Endoscopic endonasal transclival-medial condylectomy approach for resection of a foramen magnum meningioma: 2-dimensional operative video, Oper Neurosurg , 16(2), 2018, by permission from the Congress of Neurological Surgery; images at 00:30, and top image at 00:52 reused from Wen et al, Microsurgical anatomy of the transcondylar, supracondylar, and paracondylar extensions of the far-lateral approach, J Neurosurg , 87(4), 1997, with permission from JNSPG; bottom images at 00:52 from Muthukumar et al, A morphometric analysis of the foramen magnum region as it relates to the transcondylar approach, Acta Neurochir , 147(8), 2005, by permission from Springer Nature.

Retrospective evaluation of the morpometric and morphological anatomy of the occipital condyle, hypoglossal canal and foramen magnum in Turkish populaton with CBCT.

PURPOSE: The aim of this study is to morphometrically and morphologically examine the occipital condyle, which is an important anatomical region in terms of surgery and forensic medicine, and its surrounding structures, to evaluate the change in mean values according to gender and age, and to evaluate the correlation of the measurements obtained. METHODS: 180 (90 men, 90 women) CBCT images selected from the archive of Ankara University Faculty of Dentistry. Occipital Condyle length and width, Hypoglossal Canal-Basion distance, Hypoglossal Canal-Opistion distance, Hypoglossal Canal-Occipital Condyle anterior and posterior border distance, Occipital Condyle thickness, Hypoglossal Canal length, the widest diameter of Hypoglossal Canal, the narrowest diameter of the Hypoglossal Canal, the length of the Jugular Tubercle, the width of the Jugular Tubercle, the anterior intercondylar distance, the posterior intercondylar distance, and the Foramen Magnum index were measured. At the same time, the presence of septum or spicule in the hypoglossal canal and protrusion of the occipital condyle were evaluated. The relationship of age, gender, anterior and posterior intercondylar distance, and foramen magnum index measurements with all measurements were examined. RESULTS: In our study, all measurements were repeated 1 month after the first measurements to evaluate the intra-observer agreement, and the agreement between the obtained measurements and the first measurements was evaluated by calculating the intraclass correlation coefficient and 95% confidence intervals. Men's measurements were found to be significantly higher than women's measurements. When the coefficients of concordance in all measurements were examined, it was observed that there was a perfect concordance. CONCLUSION: When the results of the study are evaluated, it is seen that the values ​​obtained are generally close to the studies related to CT. Considering this, an idea can be gained as to whether CBCT, which has a lower dose and less cost, can be used as an alternative to CT in studies to be conducted with more comprehensive and different methods in skull base surgical planning.

Radiographic Prediction of the Occipito-C2 Angle Variation with Changes in Distance between the Mandible and Cervical Vertebrae: A Preliminary Study.

The Occipito (O) -C2 angle reflects the correct craniocervical spine alignment; however, the poor image quality of standard intraoperative fluoroscopy at times lead to inaccurate measurements. Herein, we preliminarily investigated the relationship between the O-C2 angle and the Gonion-C2 distance, which is based on the positioning of the mandible and the cervical spine. We enrolled patients who underwent cervical spine radiography in neutral, flexion, and extension positions from January 2020 to October 2020. The difference by posture changes for each parameter was defined as the Δ value, and the Spearman's rank correlation coefficient was determined. Furthermore, we determined the cutoff value of the ΔGonion-C2 distance to predict a decrease of > 10° in the ΔO-C2 angle, which is reported to be related to dysphagia and dyspnea. Seventy-four patients were included. Spearman's rank correlations for the neutral, flexion, and extension positions were 0.630 (P < 0.001), 0.471 (P < 0.001), and 0.625 (P < 0.001), respectively, while the cutoff values of the ΔGonion-C2 distance for predicting > 10° in the ΔO-C2 angle were 9.3 mm for the neutral flexion change (sensitivity: 0.435, specificity: 0.882) and 8.3 mm for the extension-neutral change (sensitivity: 0.712, specificity: 0.909). The O-C2 angle and Gonion-C2 distances correlated; however, this correlation was weaker in the flexed position. Nevertheless, the ΔGonion-C2 distance can be used as a warning sign for postoperative complications after posterior occipital bone fusion surgery, because a decrease of > 10° in the ΔO-C2 angle can be predicted with high specificity.

External occipital protuberance classification with special reference to spine type and its clinical implications.

PURPOSE: This investigation aimed to study the types of external occipital protuberance (EOP) with special reference to Type 3 (spine type). Detailed information will be useful for clinicians to manage occipital headaches or issues related to the biomechanics of the neck and for accurate radiological interpretations. METHODS: Thirty-one dry intact cadaveric skulls were studied for EOP classification. In Type III EOP cases, the size of EOP was noticed using different modalities and compared. The superior nuchal lines and external occipital crest were observed for their prominence and any variation. RESULTS: 42% of the skulls belong to Type 1, 51.5% to Type 2, and 6.5% to Type 3 EOP. Superior nuchal lines and external occipital crest were more prominent in Types 2 and 3 EOP. In Type 3 EOP cases, the mean length, width, and thickness of the spine as measured directly on the skull were 16.63 mm; 20.1 mm, and 7.82 mm respectively, the same as radiograph findings. CT examination revealed the average volume as 0.95 cm3. Out of two Type 3 EOP cases, the spine with larger values for its size was having a lesser volume value in CT. CONCLUSIONS: Plain lateral radiography is a reliable method to measure the length and thickness of spinous EOP. However, more values of these parameters for morphometry of the EOP spine do not mean more volume of EOP and vice versa. Detailed information regarding the occurrence of occipital spur and its morphology will be of great importance to neurosurgeons, sports, physicians, emergency departments, and radiologists.

Comparison of three-dimensional maxillary growth across spheno-occipital synchondrosis maturation stages.

BACKGROUND: This study aimed to three-dimensionally compare the maxillary growth among the spheno-occipital synchondrosis (SOS) maturation stages in both genders. METHODS: This is a cross-sectional study of a retrospective type in which cone-beam computed tomography (CBCT) images of 500 patients aged 6 to 25 years (226 males and 274 females) were analyzed. The SOS was evaluated using the four-stage scoring system; completely open, partially fused, semi-fused, or completely fused. The SOS scoring and three-dimensional cephalometric measurements were analyzed by Invivo 6.0.3 software. Descriptive and analytical statistics were performed and a P-value < 0.05 was considered statistically significant. RESULTS: There was a statistically significant difference in maxillary measurements among SOS maturation stages in both genders (P < 0.05). The mean differences in the maxillary growth among the SOS maturation stages between SOS stages 2 and 3 were higher than those between stages 1and 2 and stages 3 and 4 for maxillary length and height in both genders. However, the mean difference in the maxillary width was higher between SOS stages 1 and 2 than those stages 2 and 3 and stages 3 and 4. On other hand, there may be lesser maxillary growth between SOS stages 3 and 4 for maxillary width, length (in males), and height. The growth curves showed high active growth of the maxilla as the SOS was still fusing (especially stage 2 and 3) than those of the fused (stage 4). Moreover, the acceleration of growth occurred earlier in females than males regarding chronological age but not for SOS maturation stages. CONCLUSIONS: The SOS maturation stages are valid and reliable maxillary skeletal maturation indicators for three-dimensional maxillary growth in both genders.

Anterior occipital condyle screw placement through the endonasal corridor: proof of concept study with cadaveric analysis.

PURPOSE: Odontoidectomy for ventral compressive pathology may result in O-C1 and/or C1-2 instability. Same-stage endonasal C1-2 spinal fusion has been advocated to eliminate risks associated with separate-stage posterior approaches. While endonasal methods for C1 instrumentation and C1-2 trans-articular stabilization exist, no hypothetical construct for endonasal occipital instrumentation has been validated. We provide an anatomic description of anterior occipital condyle (AOC) screw endonasal placement as proof-of-concept for endonasal craniocervical stabilization. METHODS: Eight adult, injected cadaveric heads were studied for placing 16 AOC screws endonasally. Thin-cut CT was used for registration. After turning a standard inferior U-shaped nasopharyngeal flap endonasally, 4 mm × 22 mm AOC screws were placed with a 0° driver using neuronavigation. Post-placement CT scans were obtained to determine: site-of-entry, measured from the endonasal projection of the medial O-C1 joint; screw angulation in sagittal and axial planes, proximity to critical structures. RESULTS: Average site-of-entry was 6.88 mm lateral and 9.74 mm rostral to the medial O-C1 joint. Average angulation in the sagittal plane was 0.16° inferior to the palatal line. Average angulation in the axial plane was 23.97° lateral to midline. Average minimum screw distances from the jugular bulb and hypoglossal canal were 4.80 mm and 1.55 mm. CONCLUSION: Endonasal placement of AOC screws is feasible using a 0° driver. Our measurements provide useful parameters to guide optimal placement. Given proximity of hypoglossal canal and jugular bulb, neuronavigation is recommended. Biomechanical studies will ultimately be necessary to evaluate the strength of AOC screws with plate-screw constructs utilizing endonasal C1 lateral mass or C1-2 trans-articular screws as inferior fixation points.