RESUMEN
Continuous manufacturing has the potential to offer several benefits for the production of oral solid dosage forms, including reduced costs, low-scale equipment, and the application of process analytical technology (PAT) for real-time process control. This study focuses on the implementation of a stream sampler to develop a near infrared (NIR) calibration model for blend uniformity monitoring in a continuous manufacturing mixing process. Feeding and mixing characterizations were performed for three loss-in-weight feeders and a commercial continuous mixer to prepare powder blends of 2.5-7.5 % w/w ibuprofen DC 85 W with a total throughput of 33 kg/h. The NIR spectral acquisition was performed after the mixing stage using a stream sampler for flowing powders. A continuous mixer shaft speed of 250 RPM was selected to operate the mixing process based on a variability analysis developed with in-line spectral data acquired using the stream sampler at 6 RPM. A partial least squares regression (PLS-R) model was performed and evaluated, yielding a root-mean-square error of prediction (RMSEP) of 0.39 % w/w and a bias of 0.05 % w/w. An independent experimental run conducted two days later revealed that the continuous mixing process and the NIR calibration model presented low day-to-day variation. The minimum practical error (MPE) and sill values through variographic analysis showed low variance associated with the sampling process using the stream sampler. Results demonstrated the promising capacity of the stream sampler coupled to an NIR probe to be implemented within continuous manufacturing processes for the real-time determination of API concentration.
Asunto(s)
Composición de Medicamentos , Ibuprofeno , Polvos , Espectroscopía Infrarroja Corta , Tecnología Farmacéutica , Espectroscopía Infrarroja Corta/métodos , Espectroscopía Infrarroja Corta/instrumentación , Composición de Medicamentos/métodos , Composición de Medicamentos/instrumentación , Tecnología Farmacéutica/métodos , Tecnología Farmacéutica/instrumentación , Ibuprofeno/análisis , Ibuprofeno/química , Análisis de los Mínimos Cuadrados , Calibración , Química Farmacéutica/métodosRESUMEN
Trace palladium in synthetic materials can be rapidly and inexpensively semiquantified by a catalysis-based fluorometric method that converts resorufin allyl ether to resorufin. However, whether sulfur compounds would interfere with this method has not been systematically studied. Herein, we show that although thiourea in solution interferes with quantification, sulfide, thiol, and thiocarbamate do not. The fluorometric method can also detect palladium bound to sulfur-based scavenger resin and outperform inductively coupled plasma mass spectrometry for detecting trace palladium in ibuprofen.
Asunto(s)
Fluorometría , Ibuprofeno , Paladio , Paladio/química , Ibuprofeno/química , Ibuprofeno/análisis , Catálisis , Fluorometría/métodos , Estructura Molecular , Compuestos de Azufre/química , Compuestos de Azufre/análisisRESUMEN
The aim of this research was to develop a process analytical technology (PAT) tool for monitoring the transformation of the active ingredient ibuprofen into the fast-dissolving salt ibuprofen sodium during the wet granulation process. Two near-infrared (NIR) spectrophotometers, portable and benchtop spectrophotometer, were compared. During the analysis with the built models, both demonstrated comparable accuracy and precision (R2X = 0.995, R2Y = 0.927, Q2 = 0.995, and R2X = 0.990, R2Y = 0.948, Q2 = 0.992, respectively). Considering the applicability, a model based on the portable NIR spectroscopic data was chosen for further development and application as a PAT tool for monitoring different steps during the wet granulation process. The evaluation of the model's predictive capability involved analyzing laboratory trial batches with varying amounts of sodium carbonate, resulting in different concentrations of ibuprofen sodium at the end of the wet granulation process. Subsequently, tablets were manufactured from each trial batch, followed by dissolution analysis. The dissolution rate assays were in good agreement with the NIR-predicted concentrations of ibuprofen sodium at the end of the wet granulation process. Based on the results, the proposed model provides an excellent tool to monitor the ibuprofen acid-salt transformation, to determine the end-point of the reaction, and to efficiently control the wet granulation process.
Asunto(s)
Ibuprofeno , Espectroscopía Infrarroja Corta , Ibuprofeno/análisis , Ibuprofeno/química , Espectroscopía Infrarroja Corta/métodos , Comprimidos , SolubilidadRESUMEN
The present work demonstrates the correlation between structure, properties, and self-sensing protocols of in situ prepared ferric oxide doped grafted copolymer composite, comprised of ferric oxide, chitosan, and polypyrrole (α-Fe2O3-en-CHIT-g-PPy) for residual ibuprofen present in natural and artificial samples. The chemical structure, morphology, functionality, and physio-mechanical properties of the composite were determined by Fourier transform infrared spectrometer (FT-IR), Raman spectra, X-ray diffraction (XRD), Scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), Two probe method, and standard ASTM techniques to explore sensing nature. The results confirm the evolution of axially aligned structure against 110 planes of α-Fe2O3 and chemically functionalized expanded polymer matrix during in-situ chemical polymerization of pyrrole, with better porosity, interactivity, and improved electrical conductivity i.e. 7.32 × 10-3 S cm-1. Further, a thin film of prepared composite coated on an ITO glass plate was explored for potentiometric sensing of ibuprofen (IBU) present in artificial and natural samples without the use of any additional energy sources. The observed sensing parameters are the sensing ranging 0.5 µM to 100.0 µM, sensitivity 2.5081 mV µM-1 cm-2, response time 50 s, recovery time 10 s, and stability for 60 days. The sensing mechanism of the IBU sensor and effective charge transfer in the electrode was also discussed based on changes in IR spectra of the electrode recorded before and after sensing due to surface oxidation of IBU due to the presence of iron and doping effect of iron oxide in the composite.
Asunto(s)
Quitosano , Electrodos , Compuestos Férricos , Ibuprofeno , Polímeros , Potenciometría , Pirroles , Quitosano/química , Pirroles/química , Ibuprofeno/química , Ibuprofeno/análisis , Polímeros/química , Compuestos Férricos/química , Potenciometría/métodos , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Pharmaceuticals and Personal Care Compounds (PPCPs) are contaminants present in wastewater and in the receiving surface waters, which have no regulations and can bring on environmental risks. In this study, we evaluated the presence of six PPCPs in the Oro River Sub-basin (Colombia) and the environmental risk associated with them. We have verified that the monitored rivers show the presence of Ibuprofen, Cephalexin and Carbamazepine; the first ones (Ibuprofen and cephalexin) were those that presented higher concentrations since they are widely prescribed in Colombia. Pharmaceutical compound concentrations in the rivers downstream of the wastewater treatment plants from Floridablanca were higher than in other monitoring sites being a significant point source of contamination. This wastewater treatment plant receives hospital discharges from the city, including internationally recognized clinics accepting patients from different parts of the country. The environmental risk assessment showed that ibuprofen and Cephalexin have a higher impact on aquatic organisms.
Asunto(s)
Monitoreo del Ambiente , Ríos , Contaminantes Químicos del Agua , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/toxicidad , Ríos/química , Medición de Riesgo , Colombia , Preparaciones Farmacéuticas/análisis , Ibuprofeno/análisis , Ibuprofeno/toxicidadRESUMEN
Pharmaceuticals are of concern to our planet and health as they can accumulate in the environment. The impact of these biologically active compounds on ecosystems is hard to predict, and information on their biodegradation is necessary to establish sound risk assessment. Microbial communities are promising candidates for the biodegradation of pharmaceuticals such as ibuprofen, but little is known yet about their degradation capacity of multiple micropollutants at higher concentrations (100 mg/L). In this work, microbial communities were cultivated in lab-scale membrane bioreactors (MBRs) exposed to increasing concentrations of a mixture of six micropollutants (ibuprofen, diclofenac, enalapril, caffeine, atenolol, paracetamol). Key players of biodegradation were identified using a combinatorial approach of 16S rRNA sequencing and analytics. Microbial community structure changed with increasing pharmaceutical intake (from 1 to 100 mg/L) and reached a steady-state during incubation for 7 weeks on 100 mg/L. HPLC analysis revealed a fluctuating but significant degradation (30-100%) of five pollutants (caffeine, paracetamol, ibuprofen, atenolol, enalapril) by an established and stable microbial community mainly composed of Achromobacter, Cupriavidus, Pseudomonas and Leucobacter. By using the microbial community from MBR1 as inoculum for further batch culture experiments on single micropollutants (400 mg/L substrate, respectively), different active microbial consortia were obtained for each single micropollutant. Microbial genera potentially responsible for degradation of the respective micropollutant were identified, i.e. Pseudomonas sp. and Sphingobacterium sp. for ibuprofen, caffeine and paracetamol, Sphingomonas sp. for atenolol and Klebsiella sp. for enalapril. Our study demonstrates the feasibility of cultivating stable microbial communities capable of degrading simultaneously a mixture of highly concentrated pharmaceuticals in lab-scale MBRs and the identification of microbial genera potentially responsible for the degradation of specific pollutants. KEY POINTS: ⢠Multiple pharmaceuticals were removed by stable microbial communities. ⢠Microbial key players of five main pharmaceuticals were identified.
Asunto(s)
Contaminantes Ambientales , Microbiota , Contaminantes Químicos del Agua , Ibuprofeno/análisis , ARN Ribosómico 16S/genética , Atenolol , Acetaminofén , Cafeína , Reactores Biológicos/microbiología , Biodegradación Ambiental , Contaminantes Ambientales/análisis , Contaminantes Químicos del Agua/metabolismo , Preparaciones FarmacéuticasRESUMEN
In this work, it is studied the photolysis, electrolysis, and photo-electrolysis of a mixture of pharmaceutics (sulfadiazine, naproxen, diclofenac, ketoprofen and ibuprofen) contained in two very different types of real water matrices (obtained from surface and porewater reservoirs), trying to clarify the role of the matrix on the degradation of the pollutants. To do this, a new metrological approach was also developed for screening of pharmaceuticals in waters by capillary liquid chromatography mass spectrometry (CLC-MS). This allows the detection at concentrations lower than 10 ng mL-1. Results obtained in the degradation tests demonstrate that inorganic composition of the water matrix directly influences on the efficiency of the drugs removal by the different EAOPs and better degradation results were obtained for experiments carried out with surface water. The most recalcitrant drug studied was ibuprofen for all processes evaluated, while diclofenac and ketoprofen were found to be the easiest drugs for being degraded. Photo-electrolysis was found to be more efficient than photolysis and electrolysis, and the increase in the current density was found to attain a slight improvement in the removal although with an associated huge increase in the energy consumption. The main reaction pathways for each drug and technology were also proposed.
Asunto(s)
Cetoprofeno , Contaminantes Químicos del Agua , Diclofenaco/química , Cetoprofeno/análisis , Ibuprofeno/análisis , Agua/química , Contaminantes Químicos del Agua/análisis , Preparaciones FarmacéuticasRESUMEN
The presence of emerging substances in surface water is of a great concern knowing they are the main source for community water supply needs. This study describes the development, optimization and application of an analytical method for the determination of ibuprofen in the Danube samples. Caffeine concentrations, as an indicator of human waste, were determined and maximum risk indexes for aquatic organisms were calculated. The Danube samples were collected from ten representative locations. A Solid-phase extraction was used for ibuprofen and caffeine separation and the analysis was performed by High-performance liquid chromatography method. Ibuprofen concentrations ranged (30.62-111.40) ng/L and caffeine (305.94-375.97) ng/L. Low risk on aquatic organisms was determined for ibuprofen and potential sublethal effect for caffeine was obtained. The results indicated that ibuprofen was effectively separated from other substances in the samples under defined chromatographic conditions for short period of time (4 minutes). Applied HPLC method showed good repeatability, accuracy, selectivity and robustness. Further studies including continuous monitoring of caffeine in the Danube are necessary in order to assess the real risks and possible prevention.
Asunto(s)
Ibuprofeno , Contaminantes Químicos del Agua , Humanos , Ibuprofeno/análisis , Cromatografía Liquida/métodos , Cafeína/análisis , Organismos AcuáticosRESUMEN
Diclofenac, ibuprofen, and carbamazepine are three of the most widely detected and most concerning pharmaceutical residues in aquatic ecosystems. The aim of this study was to identify bacteria that may be involved in their degradation from a bacterial biofilm. Selective enrichment cultures in mineral salt solution containing pharmaceutical compounds as sole source of carbon and energy were set up, and population dynamics were monitored using shotgun metagenome sequencing. Bacterial genomes were reconstructed using genome-resolved metagenomics. Thirty bacterial isolates were obtained, identified at species level, and tested regarding pharmaceutical biodegradation at an initial concentration of 1.5 mg l-1. The results indicated that most probably diclofenac biodegrading cultures consisted of members of genera Ferrovibrio, Hydrocarboniphaga, Zavarzinia, and Sphingopyxis, while in ibuprofen biodegradation Nocardioides and Starkeya, and in carbamazepine biodegradation Nocardioides, Pseudonocardia, and Sphingopyxis might be involved. During the enrichments, compared to the initial state the percentage relative abundance of these genera increased up to three orders of magnitude. Except Starkeya, the genomes of these bacteria were reconstructed and annotated. Metabolic analyses of the annotated genomes indicated that these bacteria harbored genes associated with pharmaceutical biodegradation. Stenotrophomonas humi DIC_5 and Rhizobium daejeonense IBU_18 isolates eliminated diclofenac and ibuprofen during the tests in the presence of either glucose (3 g l-1) or in R2A broth. Higher than 90% concentration reduction was observed in the case of both compounds.
Asunto(s)
Agua Subterránea , Ibuprofeno , Ibuprofeno/análisis , Diclofenaco/química , Ecosistema , Carbamazepina/análisis , Bacterias/metabolismo , Biodegradación Ambiental , Biopelículas , Preparaciones FarmacéuticasRESUMEN
The presence of emerging pollutants of pharmaceutical products and personal care products (PPCPs) in the aquatic environment overspreads the threat on living beings. Bioremediation is a promising option for treating wastewater. In the present study, an experimental investigation was carried out to produce a biosurfactant by Pseudomonas aeruginosa (MTCC 1688) for the removal of Ibuprofen (IBU) and Triclosan (TCS) from domestic wastewater. It was performed in three stages. Firstly, the production and optimization of biosurfactant was carried out to arrive at the best combination of crude sunflower oil, sucrose and ammonium bicarbonate (10%: 5.5 g/L: 1 g/L) to yield effective biosurfactant production (crude biosurfactant) and further extended to achieve critical micelle concentration (CMC) formation by dilution (biosurfactant at 10.5%). The stability of the biosurfactant was also confirmed. Biosurfactant showed a reduction in the surface tension to 41 mN/m with a yield concentration of 11.2 g/L. Secondly, its effectiveness was evaluated for the removal of IBU and TCS from the domestic wastewater collected during the dry and rainy seasons. Complete removal of IBU was achieved at 36 h & 6 h and TCS at 6 h & 1 h by crude biosurfactant and biosurfactant at CMC formation for the dry season sample. IBU removal was achieved in 2 h by both crude and biosurfactant at CMC and no TCS was detected in the rainy season sample. Thirdly, biotransformation intermediates of IBU and TCS formed during the application of the biosurfactant and degradation pathways are proposed based on the Liquid Chromatography-Mass Spectrometry (LC-MS) and it indicates that there is no formation of toxic by-products. Based on the results, it is evident that biosurfactant at CMC has performed better for the removal of IBU and TCS than crude biosurfactants without any formation of toxic intermediates. Hence, this study proved to be an eco-friendly, cost-effective and sustainable treatment option for domestic wastewater treatment.
Asunto(s)
Triclosán , Aguas Residuales , Ibuprofeno/análisis , Biodegradación Ambiental , Biotransformación , Tensoactivos/química , Tensoactivos/metabolismoRESUMEN
Abstract The aim of this study was to compare the dissolution properties of ibuprofen solid oral dosage forms commercially available in Bosnia and Herzegovina and to estimate the influence of dissolution medium composition on the drug release. Eight products (A-H) were subjected to in vitro dissolution test using experimental conditions described in USP42-NF37. Dissolution properties of one selected product were examined in the presence of alcohol (22.2% v/v) and fruit juice (22.2% v/v). Products marked B-H complied with the pharmacopeial criteria. Dissolution profile of product B was similar with dissolution profiles of products D, E, F and G and similarity was also found between products A-D, C-G, D-G and E-F. Drug release from most of the examined preparations fitted best to the Weibull kinetic model. In the presence of alcohol in the medium, higher amount of ibuprofen was dissolved. Contrary, ibuprofen dissolved in the presence of fruit juice was significantly lower. Differences in the dissolution profiles of investigated preparations suggest that their interchangeability should be additionally considered and demonstrated with in vivo bioequivalence studies. Presence of different substances in the medium can affect dissolution properties of ibuprofen, emphasizing the importance of the patient's compliance.
Asunto(s)
Ibuprofeno/análisis , Intercambiabilidad de Medicamentos , Disolución , Comprimidos , Técnicas In Vitro/métodos , Preparaciones Farmacéuticas/análisis , Liberación de Fármacos/efectos de los fármacosRESUMEN
A screening for microcontaminants performed by gas chromatography detected several microcontaminants in 12 sediment samples from the eutrophic estuary Guanabara Bay (GB) in southeastern Brazil. Bisphenol A (BPA) ranged from 1.4 to 20.3 ng g-1, 4-octylphenol, from Asunto(s)
Disruptores Endocrinos
, Contaminantes Químicos del Agua
, Disruptores Endocrinos/análisis
, Estrona/análisis
, Estuarios
, Diclofenaco/análisis
, Ibuprofeno/análisis
, Contaminantes Químicos del Agua/análisis
, Gemfibrozilo/análisis
, Naproxeno
, Brasil
, Bahías
, Fenoles/análisis
, Estrógenos/análisis
, Estradiol/análisis
, Estriol/análisis
, Preparaciones Farmacéuticas
, Monitoreo del Ambiente
RESUMEN
A fast and green ultra-high-performance liquid chromatographic method was developed for the determination of ibuprofen in milk-containing simulated gastrointestinal media to monitor the dissolution of three-dimensional printed formulations. To remove interfering compounds, protein precipitation using methanol as a precipitation reagent was performed. The separation of the target analyte was performed on a C18 column using a mobile phase consisting of 0.05% v/v aqueous phosphoric acid solution: methanol, 25:75% v/v. Method validation was conducted using the total error concept. The ß-expectation tolerance intervals did not exceed the acceptance criteria of ±15%, meaning that 95% of future results will be included in the defined bias limits. The relative bias ranged between â1.1 and +3.2% for all analytes, while the relative standard deviation values for repeatability and intermediate precision were less than 2.8% and 3.9%, respectively. The achieved limit of detection was 0.01 µg/ml and the lower limit of quantitation was established as 2 µg/ml. The proposed method was simple, and it required reduced organic solvent consumption following the requirements of Green Analytical Chemistry. The method was successfully employed for the determination of ibuprofen in real biorelevant media obtained from dissolution studies.
Asunto(s)
Ibuprofeno , Leche , Animales , Leche/química , Ibuprofeno/análisis , Solubilidad , Metanol , Límite de Detección , Cromatografía Liquida , Cromatografía Líquida de Alta Presión/métodosRESUMEN
The aim of present study was to evaluate chemical composition and different biological activities viz., pharmacological and antioxidant activities of essential oils. The chemical composition of essential oils was determined by gas chromatography/mass spectrometry while biological activities were evaluated by standard protocols. Essential oils of Hedychium spicatum Sm. from two different ecological niches viz; Nainital (Site-I) and Himachal Pradesh (Site-II) of India revealed the qualitative and quantitative chemo-diversity. Both the oils were dominated by oxygenated terpenoids. Major marker compounds identified were eucalyptol, camphor, linalool, α-eudesmol, 10-epi-γ-eudesmol, and iso-borneol. Both the oils exhibited anti-inflammatory activity suppressing 17.60 % to 33.57 % inflammation at 100mg/kg b. wt. dose levels compared to ibuprofen-treated group (40.06 %). The sub-acute inflammation in oils-treated mice groups (50 and 100 mg/kg b. wt.) increased on day 2 but showed a gradual decrease from day 3 onwards and then recovered to normal by day 10. The antinociception percentage for doses (50 and 100 mg/kg b. wt.) ranged from 33.70-40.46 % in Site-I and 30.34-42.39 % in Site-II compared to standard drug, ibuprofen (43.08 %). The oils also showed a good antipyretic effect by suppressing Brewer's yeast (Saccharomyces cerevisiae) induced pyrexia after oil dose injection. The oils also exhibited good antioxidant activity.
Asunto(s)
Ibuprofeno/química , Aceites Volátiles , Zingiberaceae , Animales , Antifúngicos/farmacología , Antioxidantes/análisis , Alcanfor/análisis , Alcanfor/farmacología , Eucaliptol/análisis , Ibuprofeno/análisis , Ibuprofeno/farmacología , Inflamación , Ratones , Aceites Volátiles/química , Aceites de Plantas/química , Rizoma/química , Zingiberaceae/químicaRESUMEN
Pharmaceuticals and personal care products (PPCPs) are a group of emerging anthropogenic pollutants. Here we investigated the occurrence and concentrations of 35 typical PPCPs in water, sediment, and freshwater mollusks (Hyriopsis cumingii, Unio douglasiae, Sinanodonta woodiana, Lamprotula leai and Corbicula fluminea) of the Dongting Lake downstream of the Three Gorges Dam. As results, 33 PPCPs were detected in water and sediment of the lake. Ketoprofen (not detected (ND)-292.8 ng/L, mean 91.1 ng/L) and roxithromycin (13.7-141.9 ng/L, mean 30.4 ng/L) were the primary PPCPs measured in lake water, while ibuprofen (ND-105.0 ng/g, mean 30.0 ng/g) and ketoprofen (ND-142.9 ng/g, mean 27.6 ng/g) were dominant in the sediment. Distinct seasonal difference in PPCP compositions was observed in both water and sediment of the Dongting Lake, potentially associated with the water-level fluctuations driven by the Three Gorges Dam operations. Ketoprofen and ibuprofen were also frequently detected in the soft tissues of freshwater mollusks, with concentrations of 42.5-1206.6 and 44.9-992.7 ng/g, respectively. Significant species-specific accumulation characteristics of PPCPs in mollusks were observed, with the highest total contents being reported for Corbicula fluminea (3.18 ± 1.13 µg/g). Moreover, gonads of mollusks were identified as the target organ to accumulate these compounds. Correlation analysis further revealed the strong associations of PPCP concentrations in mollusks with those in water and sediment, suggesting the importance of controlling dissolved and sedimentary bioavailability of PPCPs for ecological risk management in this freshwater lake ecosystems.
Asunto(s)
Cosméticos , Sedimentos Geológicos , Lagos , Moluscos , Preparaciones Farmacéuticas , Contaminantes Químicos del Agua , Animales , China , Cosméticos/análisis , Ecosistema , Monitoreo del Ambiente/métodos , Sedimentos Geológicos/análisis , Ibuprofeno/análisis , Cetoprofeno/análisis , Lagos/química , Preparaciones Farmacéuticas/análisis , Medición de Riesgo , Agua/análisis , Contaminantes Químicos del Agua/análisisRESUMEN
We unravel the potentialities of resonance Raman spectroscopy to detect ibuprofen in diluted aqueous solutions. In particular, we exploit a fully polarizable quantum mechanics/molecular mechanics (QM/MM) methodology based on fluctuating charges coupled to molecular dynamics (MD) in order to take into account the dynamical aspects of the solvation phenomenon. Our findings, which are discussed in light of a natural bond orbital (NBO) analysis, reveal that a selective enhancement of the Raman signal due to the normal mode associated with the C-C stretching in the ring, νC=C, can be achieved by properly tuning the incident wavelength, thus facilitating the recognition of ibuprofen in water samples.
Asunto(s)
Ibuprofeno/análisis , Ibuprofeno/química , Espectrometría Raman/métodos , Aniones , Simulación de Dinámica Molecular , Soluciones/química , Espectrofotometría Ultravioleta , Vibración , Agua/químicaRESUMEN
The current work presents a sensitive, selective, cost-effective, and environmentally benign protocol for the detection of ibuprofen (IBP) by an electrochemical probe made of a glassy carbon electrode modified with Ag-ZnO and MWCNTs. Under optimized conditions, the designed sensing platform was found to sense IBP up to a 28 nM limit of detection. The interaction of IBP with bovine serum albumin (BSA) was investigated by differential pulse voltammetry. IBP-BSA binding parameters such as the binding constant and the stoichiometry of complexation were calculated. The results revealed that IBP and BSA form a single strong complex with a binding constant value of 8.7 × 1013. To the best of our knowledge, this is the first example that reports not only IBP detection but also its BSA complexation.
Asunto(s)
Ibuprofeno , Albúmina Sérica Bovina , Carbono , Técnicas Electroquímicas/métodos , Electrodos , Ibuprofeno/análisis , Ibuprofeno/química , Albúmina Sérica Bovina/química , Unión ProteicaRESUMEN
We previously reported that the polymers used in amorphous solid dispersion (ASD) formulations, such as polyvinylpyrrolidone (PVP), polyvinylpyrrolidone/vinyl acetate (PVP-VA), and hypromellose (HPMC), distribute into the drug-rich phase of ibuprofen (IBP) formed by liquid-liquid phase separation, resulting in a reduction in the maximum drug supersaturation in the aqueous phase. Herein, the mechanism underlying the partitioning of the polymer into the drug-rich phase was investigated from a thermodynamic perspective. The dissolved IBP concentration in the aqueous phase and the amount of polymer distributed into the IBP-rich phase were quantitatively analyzed in IBP-supersaturated solutions containing different polymers using variable-temperature solution-state nuclear magnetic resonance (NMR) spectroscopy. The polymer weight ratio in the IBP-rich phase increased at higher temperatures, leading to a more notable reduction of IBP amorphous solubility. Among the polymers, the amorphous solubility reduction was the greatest for the PVP-VA solution at lower temperatures, while HPMC reduced the amorphous solubility to the greatest extent at higher temperatures. The change in the order of polymer impact on the amorphous solubility resulted from the differences in the temperature dependency of polymer partitioning. The van't Hoff plot of the polymer partition coefficient revealed that both enthalpy and entropy changes for polymer transfer into the IBP-rich phase from the aqueous phase (ΔHaqueousâIBP-rich and ΔSaqueousâIBP-rich) gave positive values for most of the measured temperature range, indicating that polymer partitioning into the IBP-rich phase was an endothermic but entropically favorable process. The polymer transfer into the IBP-rich phase was more endothermic for HPMC than for PVP and PVP-VA. The solid-state NMR analysis of the IBP/polymer ASD implied that the newly formed IBP/polymer interactions in the IBP-rich phase upon polymer incorporation were weaker for HPMC, providing a rationale for the larger positive transfer enthalpy for HPMC. The change in Gibbs free energy for polymer transfer (ΔGaqueousâIBP-rich) showed negative values across the experimental temperature range, decreasing with an increase in temperature, indicating that the distribution of the polymer into the IBP-rich phase is favored at higher temperatures. Moreover, ΔGaqueousâIBP-rich for HPMC showed the greatest decrease with the temperature, likely reflecting the temperature-induced dehydration of HPMC in the aqueous phase. This study contributes fundamental insights into the phenomenon of polymer partitioning into drug-rich phases, furthering the understanding of achievable supersaturation levels and ultimately providing information on polymer selection for ASD formulations.
Asunto(s)
Composición de Medicamentos/métodos , Espectroscopía de Resonancia Magnética/métodos , Polímeros/química , Ibuprofeno/análisis , Ibuprofeno/química , Temperatura , TermodinámicaRESUMEN
Abstract The administration of medications on the skin through transcutaneous routes is a practice that has been used by mankind for millennia. Some studies have been reporting the use of terpenes and natural oils rich in terpenes as an enhancer of cutaneous penetration. Copaiba oil, due to its rich content of terpenes, presents itself as a great choice of penetration enhancer for drugs administered on the skin. In this study, we developed two cream formulations containing 5% of ibuprofen (IBU) and copaiba oil: IBCO5 and IBCO10 with 5% and 10% of copaiba oil respectively. Ex vivo cutaneous penetration/permeation studies of IBU were performed using pig ear skin as biological membrane in the Franz-type diffusion cells. The steady-state flux of IBU samples, IBCO5 (35.72 ± 6.35) and IBCO10 (29.78 ± 2.41) were significantly higher when compared with control without copaiba oil (10.32 ±1.52) and with a commercial product (14.44 ± 2.39). In the penetration analysis, the amount of IBU found in the samples IBCO5 and IBCO10 was markedly higher in the dermis than epidermis. Our results showed that copaiba oil possesses attracting properties in promoting skin penetration and permeation of IBU when added into cream formulations.
Asunto(s)
Piel , Extractos Vegetales/análisis , Ibuprofeno/análisis , Fabaceae/efectos adversos , Terpenos/efectos adversos , Aceites/análisis , Preparaciones Farmacéuticas/clasificaciónRESUMEN
'Molecular fingerprinting' with Raman spectroscopy can address important problems-from ensuring our food safety, detecting dangerous substances, to supporting disease diagnosis and management. However, the broad adoption of Raman spectroscopy demands low-cost, portable instruments that are sensitive and use lasers that are safe for human eye and skin. This is currently not possible with existing Raman spectroscopy approaches. Portability has been achieved with dispersive Raman spectrometers, however, fundamental entropic limits to light collection both limits sensitivity and demands high-power lasers and cooled expensive detectors. Here, we demonstrate a swept-source Raman spectrometer that improves light collection efficiency by up to 1000× compared to portable dispersive spectrometers. We demonstrate high detection sensitivity with only 1.5 mW average excitation power and an uncooled amplified silicon photodiode. The low optical power requirement allowed us to utilize miniature chip-scale MEMS-tunable lasers with close to eye-safe optical powers for excitation. We characterize the dynamic range and spectral characteristics of this Raman spectrometer in detail, and use it for fingerprinting of different molecular species consumed everyday including analgesic tablets, nutrients in vegetables, and contaminated alcohol. By moving the complexity of Raman spectroscopy from bulky spectrometers to chip-scale light sources, and by replacing expensive cooled detectors with low-cost uncooled alternatives, this swept-source Raman spectroscopy technique could make molecular fingerprinting more accessible.