Adolescents and Children Age Estimation Using Machine Learning Based on Pulp and Tooth Volumes on CBCT Images.

OBJECTIVES: To estimate adolescents and children age using stepwise regression and machine learning methods based on the pulp and tooth volumes of the left maxillary central incisor and cuspid on cone beam computed tomography (CBCT) images, and to compare and analyze the estimation results. METHODS: A total of 498 Shanghai Han adolescents and children CBCT images of the oral and maxillofacial regions were collected. The pulp and tooth volumes of the left maxillary central incisor and cuspid were measured and calculated. Three machine learning algorithms (K-nearest neighbor, ridge regression, and decision tree) and stepwise regression were used to establish four age estimation models. The coefficient of determination, mean error, root mean square error, mean square error and mean absolute error were computed and compared. A correlation heatmap was drawn to visualize and the monotonic relationship between parameters was visually analyzed. RESULTS: The K-nearest neighbor model (R2=0.779) and the ridge regression model (R2=0.729) outperformed stepwise regression (R2=0.617), while the decision tree model (R2=0.494) showed poor fitting. The correlation heatmap demonstrated a monotonically negative correlation between age and the parameters including pulp volume, the ratio of pulp volume to hard tissue volume, and the ratio of pulp volume to tooth volume. CONCLUSIONS: Pulp volume and pulp volume proportion are closely related to age. The application of CBCT-based machine learning methods can provide more accurate age estimation results, which lays a foundation for further CBCT-based deep learning dental age estimation research.

Advanced digital planning approach using a 3D-printed mock-up. A case report.

OBJECTIVE: A diagnostic mock-up is a key tool that allows a preview of the outcome of an esthetic restoration. With recent developments in CAD/CAM technology, it is important to understand the pros and cons of chairside digital dentistry and the restorative materials used. The aim of the present case report is to describe in detail the use of a 3D-printed mock-up fabricated from a polymer-based material for an esthetic treatment plan within a fully digital workflow. CASE REPORT: A 45-year-old female patient presented at the clinic concerned about her esthetic appearance and the color of her anterior incisors. After a conclusive diagnosis, a restoration was planned using ceramic veneers from maxillary premolar to premolar. For a preview visualization of the outcome, an intraoral scanner was used to obtain 3D images and to allow the design of a digital smile. The template STL file was exported to a 3D printer and a 0.6-mm mock-up in A3-shade 3D resin was produced after 25 min. The mock-up was tested through a try-in and approved by the patient. As a result, the printed mock-up was considered predictable and reliable for the final restoration. CONCLUSIONS: The ease, speed, and reduced costs derived from the digital workflow, in conjunction with the accuracy of the mock-up, made the procedure highly efficient and recommendable.

Alveolar bone retention following treatment of dilacerated labial inversely impacted maxillary central incisors-a retrospective study.

The root of late-dental-age labial inversely impacted maxillary central incisors (LIIMCIs) typically develops to severe dilacerated morphology. Therefore, reliable posttreatment periodontal estimates of orthodontic treatment prognosis would be critical to the treatment value of impacted incisors. This study aims to analyze further changes in dimensions of the alveolar bone following the closed-eruption treatment of late-dental-age dilacerated LIIMCIs. Cone beam computed tomography (CBCT) scanning data of 16 patients with unilateral dilacerated late-dental-age LIIMCIs were collected, including the pretreatment (T1) and at the 2.23 ± 0.78 years follow-up stage (T2) respectively. Patients underwent closed-eruption treatments to bring the impacted incisor into the dental arch. Dolphin imaging software was used to measure alveolar bone height labially, palatally, and proximally to the site at T1 and T2, as well as alveolar bone thicknesses at 0, 2, 4, 6 and 8 mm below the initial measurement plane (IMP). The alveolar bone heights on the impacted and contralateral sides increased from T1 to T2 (p < 0.05). Alveolar bone growth on both sides had no significant difference. In T2, the mean values of labial and distal alveolar heights on the contralateral sides were greater than on the impacted sides (p < 0.05). The mean values of total alveolar bone thicknesses on the impacted sides in T1 were significantly smaller than those on the contralateral sides in IMP-0, 2, 4, 6, 8 (p < 0.05). The total thicknesses on the impacted sides in T2 increased and were significantly greater than on the contralateral sides (p < 0.05), except for the thickness in IMP-0. The closed-eruption treatment of dilacerated late-dental-age LIIMCIs results in no significant changes to alveolar bone height, except on the labial and distal sides, with increased alveolar bone thickness, suggesting that this approach may be viable first choice therapy for non-extraction orthodontic cases.

Application of personalized templates in minimally invasive management of coronal dens invaginatus: a report of two cases.

BACKGROUND: Treating the coronal dens invaginatus (CDI) with pulp infection commonly involves the removal of invagination, which increases the risk of perforation and fracture, and compromises the tooth structure. Minimally invasive endodontic management of CDI is highly recommended. This report describes two cases of type II CDI with the application of personalized templates. CASE PRESENTATION: Two cases of type II CDI, affecting the main root canal in a maxillary canine and a lateral incisor, were diagnosed. A guided endodontics (GE) approach was applied. Cone-beam computed tomography and intraoral scans were imported and aligned in a virtual planning software to design debridement routes and templates. The MICRO principle (which involves the aspects of Mechanical (M) debridement, Irrigation (I), Access cavities (C), Rectilinear routes (R), and Obstruction (O)) was proposed for designing optimal debridement routes for future applications. The templates were innovatively personalized and designed to preserve the tooth structure maximally while effectively debriding the root canal. Root canal treatment with supplementary disinfection was then performed. The follow-up of the two patients revealed favorable clinical and radiographic outcomes. CONCLUSIONS: The GE approach could be a feasible method for preserving healthy dental structure while effectively debriding the root canal, thereby achieving successful and minimally invasive endodontic treatment for CDI.

Microhardness Measurements on Tooth and Alveolar Bone in Rodent Oral Disease Models.

The mechanical property, microhardness, is evaluated in dental enamel, dentin, and bone in oral disease models, including dental fluorosis and periodontitis. Micro-CT (µCT) provides 3D imaging information (volume and mineral density) and scanning electron microscopy (SEM) produces microstructure images (enamel prism and bone lacuna-canalicular). Complementarily to structural analysis by µCT and SEM, microhardness is one of the informative parameters to evaluate how structural changes alter mechanical properties. Despite being a useful parameter, studies on microhardness of alveolar bone in oral diseases are limited. To date, divergent microhardness measurement methods have been reported. Since microhardness values vary depending on the sample preparation (polishing and flat surface) and indentation sites, diverse protocols can cause discrepancies among studies. Standardization of the microhardness protocol is essential for consistent and accurate evaluation in oral disease models. In the present study, we demonstrate a standardized protocol for microhardness analysis in tooth and alveolar bone. Specimens used are as follows: for the dental fluorosis model, incisors were collected from mice treated with/without fluoride-containing water for 6 weeks; for ligature-induced periodontal bone resorption (L-PBR) model, alveolar bones with periodontal bone resorption were collected from mice ligated on the maxillary 2nd molar. At 2 weeks after the ligation, the maxilla was collected. Vickers hardness was analyzed in these specimens according to the standardized protocol. The protocol provides detailed materials and methods for resin embedding, serial polishing, and indentation sites for incisors and alveolar. To the best of our knowledge, this is the first standardized microhardness protocol to evaluate the mechanical properties of tooth and alveolar bone in rodent oral disease models.

Cone-beam computed tomography evaluation of shaping ability of kedo-S square and fanta AF™ baby rotary files compared to manual K-files in root canal preparation of primary anterior teeth.

BACKGROUND: Pediatric rotary file systems were developed to solve manual file limitations. With many systems available, it may be tricky to select the most appropriate one. AIM: to assess & compare Kedo-S Square, Fanta-AF™-Baby rotary files with manual K-file concerning removed dentin amount, canal transportation, centric ability & root canal taper using CBCT in primary anterior teeth. DESIGN: Extracted Seventy-five upper primary anterior teeth with intact 2/3 root length were collected and divided into three groups based on root canal instrumentation, group-I: prepared using K-file, group-II: prepared using Kedo-S Square, and group-III: prepared using Fanta AF™ Baby file. The teeth were imaged with CBCT before & following canal instrumentation. Then, the removed dentin amount was calculated at each root-canal level. The Kruskal-Wallis test was utilized to statistically analyze study data. RESULT: The difference among the three groups was highly statistically significant at cervical & apical thirds concerning dentin thickness changes on both mesial & distal sides following canal preparation with the least removed dentin in the Kedo-S Square group(P < 0.0001). Regarding transportation & centering ability, a non-significant difference between the three groups was found. 80% of the Fanta AF™ Baby group had good-tapered preparation compared to the Kedo-S Square (72%) and K-file (40%) groups(P < 0.05). CONCLUSION: Kedo-S Square was preferable to Fanta-AFTM-Baby & manual K-files in primary root canal preparation.

Micro-computed tomographic analysis of the morphology of maxillary lateral incisors.

OBJECTIVE: This study aimed to investigate the morphology of maxillary lateral incisors (MxLI) using micro-computed tomography (micro-CT). MATERIALS AND METHODS: The root canal configurations (RCC) of maxillary lateral incisors (MxLI) of a mixed Swiss-German population were examined using micro-CT, 3D imaging, and a 4-digit system code indicating the main root canal from coronal to apical thirds and the main foramina number. RESULTS: The most frequently observed RCC of MxLI were 1-1-1/1 (Vertucci I/Ve I, 80.0%), 1-1-2/2 (Ve V, 7.3%), 1-2-1/1 (Ve III, 6.4%), 2-1-1/1 (Ve II, 1.8%), and 1-1-1/2 (1.8%)(n = 110). Three additional RCC were observed less frequently (0.9%). The MxLI showed one physiological foramen in 89.1%, two in 9.1%, and seldom three (1.8%). Most accessory canals were identified in the apical third of a root (20.0%), and no accessory canals in 72.7% of the samples. CONCLUSIONS: Detailed information on the internal morphology of MxLI of a Swiss-German population is given. The most frequently observed RCC of MxLI is 1-1-1/1 (Ve I). However, accessory canals may occur in all apical thirds, and 20% of all teeth investigated showed a challenging RCC for clinical treatment. CLINICAL RELEVANCE: This study offers clinicians comprehensive data on MxLI morphology, emphasizing the significance of understanding varied RCC and accessory canal presence for improving root canal treatment outcomes. Over 25% of teeth exhibited complex RCC or accessory canals, influencing decisions during root canal treatment.

Radiological, histological and clinical side effects of incisor trimming in rabbits.

INTRODUCTION: Incisor malocclusion in rabbits (Oryctolagus cuniculus) is a common clinical problem seen in general practice. Given that the growth rate is about 2 mm per week, a lack of wear quickly leads to feeding difficulties and soft tissue injuries. Therefore, pathologically elongated incisors must be shortened every three to six weeks. The goal of this study was to assess the potential adverse effects on dental and periodontal tissues associated with the three most commonly used trimming methods: nail cutter, diamond-coated cutting disc and diamond burr. The left mandibular incisor of 28 healthy New Zealand rabbits was subjected to four trimmings with one of the three cutting methods. After the fattening period, the mandibles were collected and both mandibular incisors were investigated on dental radiographs, micro-computed tomography scans and histological sections. Dental and periodontal tissue changes were evaluated. This study allowed a more accurate statement of the potential short-term adverse effects of the three trimming methods. At the clinical level, the nail cutter caused the formation of an irregular occlusal surface with sharp edges. Both engine-drive methods allowed the attainment of a smooth surface but the disc was less accurate. Histological evaluation revealed that the primary modifications, including coronal fractures, periodontal ligament widening and inflammation, reparative osteodentine, paracementosis and biofilm accumulation, were found in the nail cutter group.

INTRODUCTION: La malocclusion des incisives chez le lapin (Oryctolagus cuniculus) est un problème clinique courant en médecine générale. Étant donné que le taux de croissance est d'environ 2 mm par semaine, un manque d'usure entraîne rapidement des difficultés d'alimentation et des lésions des tissus mous. Par conséquent, les incisives pathologiquement trop longues doivent être raccourcies toutes les trois à six semaines. L'objectif de cette étude était d'évaluer les effets négatifs potentiels sur les tissus dentaires et parodontaux associés aux trois méthodes de taille les plus couramment utilisées: le coupeongles, le disque de coupe diamanté et la fraise diamantée. L'incisive mandibulaire gauche de 28 lapins néo-zélandais en bonne santé a été soumise à quatre tailles avec l'une des trois méthodes de coupe. Après la période d'engraissement, les mandibules ont été prélevées et les deux incisives mandibulaires ont été examinées sur des radiographies dentaires, des examens micro-tomodensitométriques et des coupes histologiques. Les modifications des tissus dentaires et parodontaux ont été évaluées. Cette étude a permis de mieux cerner les effets indésirables potentiels à court terme des trois méthodes de coupe. Au niveau clinique, le coupe-ongles a entraîné la formation d'une surface occlusale irrégulière avec des bords tranchants. Les deux autres méthodes de taille permettent d'obtenir une surface lisse, mais le disque est moins précis. L'évaluation histologique a révélé que les modifications primaires, y compris les fractures coronaires, l'élargissement et l'inflammation du ligament parodontal, l'ostéodentine réparatrice, la paracémentose et l'accumulation de biofilm, ont été trouvées dans le groupe coupe-ongles.

Evaluation of Bone Growth around Autotransplanted Teeth Using Cone-Beam Computed Tomographic Images.

INTRODUCTION: The aim of this observational study was to evaluate bone growth at the recipient site of autotransplanted teeth using cone-beam computed tomography (CBCT) images and to compare it to the control tooth. METHODS: Bone growth was measured on CBCT images obtained from the anterior region of the maxilla, which received a single transplant of immature premolars due to early loss of the central incisor. The results were compared to the bone growth of contralateral central incisor that served as control. The sample consisted of 13 autotransplanted teeth and 13 control teeth. It was determined the thickness of the buccal bone of the marginal ridge, the thickness of the palatal bone of the marginal ridge, the height of the maxillary bone, and the thickness of the maxillary bone at its mid-height. The measurements were analyzed statistically, adopting a significance level of 5%. RESULTS: The mean interval between the dental autotransplantation surgery and the CBCT scan was 16.2 years. The mean thickness of the buccal bone of the marginal ridge, thickness of the palatal bone of the marginal ridge, height of the maxillary bone, and thickness of the maxillary bone at its mid-height were, respectively, 0.85, 0.94, 19.6, and 8.85 mm for autotransplanted teeth and 0.79, 1.09, 18.88, and 8.5 mm for control teeth. There were no significant differences in the bone measurements between autotransplanted and control teeth (P > .05). CONCLUSIONS: The growth of maxillary bone in the region that received the autotransplanted tooth was proportional to that of maxillary bone that supports the contralateral tooth. Thus, autogenous transplantation is efficient in maintaining the bone architecture at the recipient site.

Accuracy of Dolphin Imaging software in predicting soft tissue changes of Class II Division 1 incisor relationship treated by all first premolar extraction compared with post-treatment lateral cephalogram.

BACKGROUND: To quantify the accuracy of Dolphin Imaging software in predicting soft tissue changes of Class II Division 1 incisor relationship treated by all first premolar extraction compared with actual changes. METHODS: Pretreatment and post-treatment lateral cephalograms of 30 young adult subjects (25 females and 5 males; age range of 16 to 21 years) were imported and traced in Dolphin Imaging software (version 11.95). Tracings of actual treatment results and the Dolphin predicted treatment outcome were superimposed to calculate the prediction errors. The mean difference for the Holdaway soft tissue analysis and at each landmark was measured in both the X and Y axes. Paired t test was used to compare the statistical differences in Holdaway soft tissue analysis parameters. RESULTS: There were significant differences between the predicted and actual values in three parameters of the Holdaway soft tissue analysis (P < 0.05). The overall accuracy of estimation was better in vertical direction than horizontal. Prediction of upper and lower lip landmarks was overestimated horizontally and underestimated vertically, whereas that belonging to chin was underestimated horizontally and overestimated vertically. Soft tissue nasion and soft tissue A-point were most accurately predicted, whereas the least accuracy was found in soft tissue chin region. CONCLUSIONS: Dolphin Imaging Software (version 11.95) can be accurate enough for use in patient communication and education but should be used with caution. It is most accurate in predicting soft tissue changes in the nasion and A-point regions, but least accurate in chin region.

Retrospective comparison of two different miniscrew-supported molar distalization methods applied in the buccal and palatal regions.

BACKGROUND: To compare dentofacial effects of distalization with miniscrew-supported pendulum and infrazygomatic crest miniscrews. METHODS: The study included 36 patients whose lateral cephalometric radiographs were obtained before (T0) and after (T1) distalization. Patients were divided into two groups according to the treatment methods: 1) distalization with miniscrew-supported pendulum (MSP) (n = 19; 14 girls and 5 boys; mean age 16.9 ± 1.46 years) and 2) distalization with infrazygomatic crest (IZC) miniscrews (n = 17; 8 girls and 9 boys; mean age 17.0 ± 1.68 years). Dental, skeletal and soft tissue measurements were performed on lateral cephalograms taken from individuals. RESULTS: A significant molar distalization was achieved both in the MSP group (3.52 ± 0.76 mm at 8.71 ± 2.02 months) and the IZC group (3.5 ± 0.74 mm at 9.7 ± 2.5 months) (P < 0.001 for both). Premolar distalization was significantly lower in the MSP group (1.73 ± 1.09 mm) than in the IZC group (2.81 ± 0.79 mm) (P < 0.01). Significant molar tipping was observed in both groups (P < 0.001), while no significant difference was found between the groups (P > 0.05). Retrusion of maxillary incisors were significantly higher in the IZC group (2.75 mm) than in the MSP group (0.98 mm) (P < 0.01). A significant difference was found between the two groups with regard to the changes in overjet and overbite (P < 0.05). CONCLUSIONS: Both distalization methods were found to be effective in achieving a Class I molar relationship in patients with Class II malocclusion.

Influence of alveolar bone thickness and bucco-palatal inclination on root resorption of lateral incisors in unilateral maxillary impacted canines: a retrospective observational study.

BACKGROUND: This study aimed to investigate the potential associations between alveolar bone thickness, bucco-palatal inclination of maxillary lateral incisors, and lateral incisor root resorption in patients with unilateral maxillary impacted canines (UMICs). METHODS: A total of three hundred and five subjects (120 males, 185 females; mean age, 16.39 years; standard deviation, 4.04) with UMICs were included. Canine position and root resorption were assessed using CBCT. UMICs were divided into palatal, buccal and mid-alveolus groups (PICs, BICs and MAICs), with 117, 137 and 51 subjects, respectively. Alveolar bone thickness and bucco-palatal inclination of lateral incisors were measured using the Dolphin software. RESULTS: The prevalence of lateral incisor root resorption was significantly lower in the BICs (13.9%) than MAICs (29.4%) and PICs (29.1%). Alveolar bone thickness of the apical area was smaller in UMICs with lateral incisor root resorption than no resorption in both PICs (8.33 ± 1.64 vs 10.53 ± 2.55 mm) and BICs (8.94 ± 1.85 vs 10.76 ± 2.28 mm). Furthermore, lateral incisors on the impacted side were more buccally inclined in PICs with lateral incisor root resorption than no resorption, while in both BICs and MAICs, there was no statistical difference between lateral incisor root resorption than no resorption. Moreover, alveolar bone thickness of the apical area, rather than bucco-palatal inclination of lateral incisors, was significantly correlated with lateral incisor root resorption both in PICs and BICs. CONCLUSIONS: Lateral incisor root resorption is less common in BICs. Thinner alveolar bone thickness at the apical area of lateral incisors can be considered as a potential risk factor for lateral incisor root resorption in UMICs.

Local factors relating to mandibular canine impaction: A retrospective study.

INTRODUCTION: This study aimed to investigate the characteristics of impacted and transmigrated mandibular canines and the association existing between them and some local factors, such as degrees of axial inclination of mandibular incisors, skeletal Class, and mandibular symphysis width. METHODS: A retrospective observational study was performed on the medical records and radiographic examination (panoramic radiographs and lateral cephalograms) of 102 orthodontic patients divided into a study group, with at least 1 impacted mandibular canine (51 subjects) and a control group, without mandibular impaction (51 subjects). A chi-square test, t test, and analysis of variance test analysis were used to analyze the data. RESULTS: Unilateral and buccal impaction and the presence of the deciduous canine were the more prevalent characteristics of impacted canines, whereas 39.2% presented transmigration. Furthermore, the persistence of the deciduous canine on the impaction side (P <0.0001) and the mesial axial inclination of the impacted canine (P <0.0001) were found to be statistically significant characteristics. A statistically significant association was found between the impaction of the mandibular canine and mandibular incisor to the mandibular plane angle (IMPA) (IMPA, 95.8°; P = 0.009). An additional statistically significant association was found with transmigrated canines (IMPA, 96.8°; P = 0.024). CONCLUSIONS: The mesialization of the canine cusp and the persistence of the mandibular deciduous canine are characteristics frequently found in the impaction of the mandibular canine. An accentuated vestibular inclination of the mandibular incisors is significantly associated with mandibular canine impaction.

Factors affecting local alveolar bone thickness in unilateral maxillary canine-lateral incisor transposition.

INTRODUCTION: This study aimed to use 3-dimensional data to investigate the factors affecting local alveolar bone thickness in unilateral maxillary canine-lateral incisor transposition. METHODS: Pretreatment cone-beam computed tomography data of 34 patients with unilateral maxillary canine-lateral transposition were imported into Dolphin Imaging software (version 11.8; Dolphin Imaging and Management Solutions, Chatsworth, Calif) for 3-dimensional reconstruction. The age, gender, and type of transposition at the beginning of treatment were recorded. The thickness and height of the transposed canine, the labiopalatal and distomedial distance from the transposed canine to the apex of the lateral incisor, the inclination of the transposed lateral incisor, the apical height of the lateral incisor, and the alveolar bone thickness in the apical plane were measured. Multiple linear regression analyses were applied to investigate the factors affecting alveolar bone thickness in the apical plane of the transposed lateral incisor. Two sample t test were applied to assess the difference of alveolar bone thickness in patients of different ages. RESULTS: The 10 boys and 24 girls had a mean age of 12.26 ± 2.34 years. In all 34 participants, the apical alveolar bone thickness of transposed lateral incisors was significantly higher than that of the unaffected side (P <0.05). Based on multiple regression analyses, factors associated with a wider alveolar bone thickness were as follows: age (ß = -0.237; P = 0.008), the labiopalatal distance from the transposed canine to the apex of the lateral incisor (ß = 0.675; P <0.001), and the inclination of the transposed lateral incisor (ß = 0.048; P = 0.032). Patients aged <11 years had significantly thicker alveolar bone than that of patients aged >11 years (P <0.05). CONCLUSIONS: Patients with younger age, greater lateral incisor inclination, and greater labiopalatal distance between canine and lateral incisor had more alveolar bone thickness. Early treatment permits tooth movement within the thicker alveolar bone.

Cone-beam Computed Tomography Analysis of the Root Canal Morphology of Mandibular Incisors Using Two Classification Systems in a Spanish Subpopulation: A Cross-Sectional Study.

OBJECTIVE: This study evaluated the root and canal morphology in permanent mandibular incisors teeth using cone-beam computer tomography imaging in a Spanish subpopulation, and compared these findings with ipsilateral (similarity) and contralateral (symmetry) incisors. In addition, the position of canal splitting was measured. METHODS: A total of 229 datasets comprising four mandibular teeth each (n=916 incisors) were analysed using Vertucci and Ahmed et al. classifications, and, the similarity and symmetry were calculated. The distance from the cemento-enamel junction (CEJ), and the most coronal canal divergence was measured (if present). The role of sex was also assessed. The Cochran Q Test, LOGIS PROC in SUDAAN, Chi-square, and Kappa were used for the different comparisons. A p-value of less than 0.05 was considered significant. RESULTS: All incisors were single-rooted and no significant differences regarding root canal morphology were found according to the sex of the subjects included in the database. The most common morphology was Vertucci type I/Ahmed et al. 1MI1(65.3% for central and 66.8% for lateral incisors respectively), followed by type III/1MI1-2-1 (31% for central and 30.6% for lateral incisors). 1.8% of the samples were considered as non-classifiable with Vertucci but were classified with codes using the Ahmed et al. system. Similarity values were 74.7% for the left side, and 74.2% for the right side, whereas symmetry values were 90% for central and 84.3% for lateral incisors. In the presence of divergences, the main (SD) distances from the CEJ were for type II/1MI1-2-1 3.8+-0.8 (centrals) 4.0+-0.7 mm (laterals); for type V/1MI1-2 this value ranged between 6.0+-1.8 and 5.5+-1.5 mm, whereas values for 1MI1-2-3-2-1 were 1.8 and 2.1 mm. No significant differences were found when the position of the most coronal divergence was compared between lateral and central incisors for the different morphologies. CONCLUSION: A high prevalence of Vertucci I/Ahmed et al. 1MI1 configuration was present in mandibular incisors from Spanish individuals. Similarity and symmetry were common, particularly for central incisors. The position of the coronal splitting of the canals varied according to the root canal morphology.

Alveolar morphometry in young adults with and without agenesis of the upper lateral incisor: A retrospective study.

INTRODUCTION: We aimed to compare alveolar morphometry in young adults with agenesis of the upper lateral incisor versus the side without agenesis and versus matched controls. MATERIAL AND METHODS: In this observational retrospective study, cone beam computed tomography scans were obtained of 36 upper hemiarches from young adults aged 15 to 30 years. The hemiarches were distributed into three groups: group 1: 12 upper hemiarches presenting agenesis of the upper lateral incisor; group 2: 12 upper hemiarches from the opposite side without agenesis of the upper lateral incisor (control group 1); and group 3: 12 upper hemiarches without agenesis of the upper lateral incisor matched for age and sex with respect to the affected group (control group 2). A trained and calibrated investigator performed all the alveolar measurements at two different times, including sagittal, coronal and axial slices of each hemiarch. Paired Student's t-tests, Chi-square and repeated measures ANOVA with Bonferroni correction were used, (P<0.05). RESULTS: Apical mesial evaluation of group 1 (4.22±1.19mm) was significantly lower (P<0.001) than that of groups 2 (6.72±1.17mm) and 3 (7.58±1.67mm). Apical distal evaluation also showed differences (P<0.001) among the three groups, with the dimension being smaller in group 1 with agenesis (4.53±1.14mm), followed by group 2 without agenesis (6.23±1.55mm) and the healthy control group 3 (7.73±1.71mm). CONCLUSIONS: Lateral incisor agenesis significantly reduces the alveolar dimensions of the affected area. In cases of unilateral agenesis, the unaffected side also shows sequelae, with decreased dimensions compared to cases without agenesis. This condition should be taken into account when making therapeutic decisions regarding rehabilitation with implants or canine replacement.

Developmental characteristics of the permanent upper lateral incisor in unilateral cleft lip and palate.

OBJECTIVES: This study aims to provide insights into the developmental characteristics of the upper lateral incisor in individuals with unilateral clefts. MATERIALS AND METHODS: Panoramic radiographs of a consistent group of Caucasian children taken over time (ages 6, 9, and 12) were extensively reviewed. The study assessed the distribution pattern, eruption path, tooth development, and crown size of the upper lateral incisor within the cleft region. RESULTS: The most commonly observed distribution pattern was the lateral incisor located distal to the cleft, accounting for 49.2% of cases. Furthermore, a significant delay in tooth development of the upper lateral incisor on the cleft side was noted at ages 6 and 9 (p > 0.001). Compared with the non-cleft side, these incisors often erupted along the alveolar cleft and exhibited microdontia (88.3%, p < 0.041). CONCLUSION: Lateral incisors on the cleft side display unique distribution patterns, microdontia, and delayed tooth development. Careful monitoring of the cuspid eruption is essential, as it can influence the eruption of the lateral incisor. CLINICAL RELEVANCE: A comprehensive understanding of the development of the upper lateral incisor relative to the cleft is vital for determining its prognosis over time. The position of the upper lateral incisor can also influence the timing and prognosis of secondary alveolar bone grafting. Preserving the upper lateral incisor favors arch length, perimeter, and symmetry in individuals with unilateral clefts.

Management options and long-term follow-ups for permanent double incisors: six to eleven-year case reports.

BACKGROUND: Double teeth are dental anomalies that can lead to aesthetic and orthodontic problems. CASE PRESENTATION: This report discusses two cases involving the multidisciplinary management of permanent maxillary left lateral incisors fused with a supernumerary tooth in two girls aged 9 and 10. Following intraoral and radiographic examinations, one was diagnosed with fusion, and the other was diagnosed with concrescence. The crown of the fused incisor was separated using a burs and extracted intraorally. The concrescent incisor was separated along its length using a laser and intentionally replanted extraorally. After a 6-year follow-up, no pathological signs were observed in the fused incisor. However, after an 11-year follow-up, external resorption was observed in the concrescent incisor. CONCLUSIONS: Both incisors remained asymptomatic throughout the observation period. This case report highlights two different and effective methods employed to preserve the natural function, form, and aesthetics of double incisors.

Reliability and safety of miniscrew insertion planning with the use of lateral cephalograms assessed on corresponding cone-beam computer tomography images.

BACKGROUND/OBJECTIVES: Recently, lateral cephalograms have been proposed for guided miniscrew insertion planning. Therefore, the aim was to assess the reliability and safety of such planning on corresponding cone-beam computer tomography (CBCT) images. MATERIALS/METHODS: Intraoral scans, lateral cephalograms, and CBCT images of 52 subjects (even sexes distribution), aged 15.1 ±â€…2.5 years, were included. Miniscrew (n = 104) insertion planning was performed using lateral cephalograms superimposed on the maxillary intraoral scans, while the assessment of their bicortical placement, length in bone, contact with adjacent teeth, incisive canal, and nasal floor perforation was done on corresponding superimposed CBCT images. Moreover, maxillary incisor inclination, crowding, and the maxillary intercanine width were measured. RESULTS: The overall miniscrew length in bone was 7.2 ±â€…1.3mm. Bicortical placement was seen in 58.7% of the sample (38.5% of subjects). Incisive canal and nasal floor perforation was seen in 25% and 21.2% of subjects, respectively. No contact of the miniscrew with adjacent teeth was recorded. A negative significant interaction was seen between the miniscrew length in bone, the percentage of total miniscrew length and maxillary anterior teeth crowding (ß, -0.10, P = .047 and ß, -0.90, P = .006, respectively). Moreover, a positive significant interaction was seen between the incisive canal perforation and maxillary anterior teeth crowding (OR = 1.32, P = .021). LIMITATIONS: Exclusion of subjects with impacted teeth. CONCLUSIONS: Miniscrew insertion planning using lateral cephalograms, despite being safe in preventing contact with adjacent teeth, is limited in achieving bicortical placement and insufficient in completely avoiding incisive canal and nasal floor perforation.

Effects of different patterns of movement for correcting a deep curve of Spee with clear aligners on the anterior teeth: a finite element analysis.

OBJECTIVE: To analyse the anterior teeth effects of clear aligners on five different patterns of mandibular molar movement and to define the most effective configuration to be implemented with clear aligners through finite element analysis. METHODS: A three-dimensional mandibular model with a deep overbite in the mandible was constructed using cone beam computerized tomography (CBCT) data. The model included the mandibular dentition, mandibular periodontal ligaments, attachments, and aligners. Five models were created: (1) configuration A: second molar distalization (0.25 mm); (2) configuration B: second molar distalization (0.25 mm), first molar extrusion (0.15 mm); (3) configuration C: second molar distalization (0.25 mmm), first and second premolar extrusion(0.15 mm); (4) configuration D: second molar distalization (0.25 mm), first molar and first/second premolar extrusion(0.15 mm); and (5) configuration E: second molar distalization (0.25 mm), first molar and first/second premolar extrusion (0.15 mm), first molar and first/second premolar expansion (0.15 mm). RESULTS: In all configurations, the anterior teeth exhibited labial tipping and the mandibular central incisor of configuration E showed the highest labial tipping. Configuration E demonstrated a relatively minor impact on mandibular molars distalization compared with configuration A. Configuration A showed the highest distal displacement value, and configuration E produced the lowest displacement value. Configuration E caused the highest periodontal ligament (PDL) pressure of the central and lateral incisors. The differences in the canines between configurations C and D,were not significant, and the stress distribution differed among the five groups. CONCLUSIONS: All patterns utilizing clear aligners facilitated mandibular molar distalization. Extruding the premolars and second molar distalization at the same time had little impact on second molar distalization; When expansion and extrusion were simultaneously performed during the distalization of mandibular molars, our prime consideration was the alveolar bone on the labial side of the anterior teeth to prevent the occurrence of gingival recession, dehiscence, and fenestration. Due to the lack of consideration for periodontal tissues in this study, clinical protocols should be designed based on the periodontal status of the mandibular anterior teeth.