Flash heating process for efficient meat preservation.

Maintaining food safety and quality is critical for public health and food security. Conventional food preservation methods, such as pasteurization and dehydration, often change the overall organoleptic quality of the food products. Herein, we demonstrate a method that affects only a thin surface layer of the food, using beef as a model. In this method, Joule heating is generated by applying high electric power to a carbon substrate in <1 s, which causes a transient increase of the substrate temperature to > ~2000 K. The beef surface in direct contact with the heating substrate is subjected to ultra-high temperature flash heating, leading to the formation of a microbe-inactivated, dehydrated layer of ~100 µm in thickness. Aerobic mesophilic bacteria, Enterobacteriaceae, yeast and mold on the treated samples are inactivated to a level below the detection limit and remained low during room temperature storage of 5 days. Meanwhile, the product quality, including visual appearance, texture, and nutrient level of the beef, remains mostly unchanged. In contrast, microorganisms grow rapidly on the untreated control samples, along with a rapid deterioration of the meat quality. This method might serve as a promising preservation technology for securing food safety and quality.

Safe Food Supply Chain as Health Network: An Evolutionary Game Analysis of Behavior Strategy for Quality Investment.

There is a natural relation between human health and the quality of their food and drinks, and elevating the quality input level of food production for all enterprises within the food supply chain system forms the foundation for preventing various potential food safety risks that may be encountered. Unlike the previous research on quality investment of food production by enterprises, this paper probes into the evolutionary routes of the behavior strategy selection of subjects in the food supply chain and the preconditions for the equilibrium points of the social co-governance system. It takes the approach of establishing a tripartite evolutionary game model of food suppliers, food manufacturers and consumers on the basis of the social co-governance framework, in view of the above, this paper focuses on the influence of the reputation mechanism and the market contracts among supply chain subjects on the selection of a behavior strategy for quality investment by enterprises under the condition of lawful regulation by government. The results show that every subject selects their own behavior strategy on the basis of the balance of their respective interests. The net disbursement incurred by enterprises for quality investment and the costs of participation in governance by consumers constitute the dominant factors that influence both enterprises' selection of a behavior strategy and the level of social co-governance. Compared with the increase in economic punishment imposed on suppliers for production of risky food raw materials, it is more efficient to control food safety risks by lowering the costs of quality investment by suppliers. Accordingly, this paper proposes advice on policy in an attempt to provide inspiration for preventing and controlling food safety risks.

Upconversion nanoparticles-modified aptasensors for highly sensitive mycotoxin detection for food quality and safety.

Mycotoxins, highly toxic and carcinogenic secondary metabolites produced by certain fungi, pose significant health risks as they contaminate food and feed products globally. Current mycotoxin detection methods have limitations in real-time detection capabilities. Aptasensors, incorporating aptamers as specific recognition elements, are crucial for mycotoxin detection due to their remarkable sensitivity and selectivity in identifying target mycotoxins. The sensitivity of aptasensors can be improved by using upconversion nanoparticles (UCNPs). UCNPs consist of lanthanide ions in ceramic host, and their ladder-like energy levels at f-orbitals have unique photophysical properties, including converting low-energy photons to high-energy emissions by a series of complex processes and offering sharp, low-noise, and sensitive near-infrared to visible detection strategy to enhance the efficacy of aptasensors for novel mycotoxin detection. This article aims to review recent reports on the scope of the potential of UCNPs in mycotoxin detection, focusing on their integration with aptasensors to give readers clear insight. We briefly describe the upconversion photoluminescence (UCPL) mechanism and relevant energy transfer processes influencing UCNP design and optimization. Furthermore, recent studies and advancements in UCNP-based aptasensors will be reviewed. We then discuss the potential impact of UCNP-modified aptasensors on food safety and present an outlook on future directions and challenges in this field. This review article comprehensively explains the current state-of-the-art UCNP-based aptasensors for mycotoxin detection. It provides insights into potential applications by addressing technical and practical challenges for practical implementation.

Improving the microbiological safety and quality of aquatic products using nonthermal processing.

Spoilage and deterioration of aquatic products during storage are inevitable, posing significant challenges to their suitability for consumption and the sustainability of the aquatic products supply chain. Research on the nonthermal processing of fruit juices, probiotics, dairy products, and meat has demonstrated positive outcomes in preserving quality. This review examines specific spoilage bacteria species and mechanisms for various aquatic products and discusses the principles, characteristics, and applications of six nonthermal processing methods for bacterial inhibition to maintain microbiological safety and physicochemical quality. The primary spoilage bacteria groups differ among fish, crustaceans, and shellfish based on storage conditions and durations. Four metabolic pathways utilized by spoilage microorganisms-peptides and amino acids, nitrogen compounds, nucleotides, and carbohydrates-are crucial in explaining spoilage. Nonthermal processing techniques, such as ultrahigh pressure, irradiation, magnetic/electric fields, plasma, and ultrasound, can inactivate microorganisms, thereby enhancing microbiological safety, physicochemical quality, and shelf life. Future research may integrate nonthermal processing with other technologies (e.g., modified atmosphere packaging and omics) to elucidate mechanisms of spoilage and improve the storage quality of aquatic products.

Addressing the safety of new food sources and production systems.

New food sources and production systems (NFPS) are garnering much attention, driven by international trade, changing consumer preferences, potential sustainability benefits, and innovations in climate-resilient food production systems. However, NFPS can introduce new challenges for food safety agencies and food manufacturers. Most food safety hazards linked to new foods have been identified in traditional foods. However, there can be some food safety challenges that are unique to new foods. New food ingredients, inputs, and processes can introduce unexpected contaminants. To realize the full potential of NFPS, there is a need for stakeholders from governments, the food industry, and the research community to collectively work to address and communicate the safety of NFPS products. This review outlines known food safety hazards associated with select NFPS products on the market, namely, plant-derived proteins, seaweeds, jellyfish, insects, microbial proteins, as well as foods derived from cell-based food production, precision fermentation, vertical farming, and 3D food printing. We identify common elements in emerging NFPS regulatory frameworks in various countries/regions. Furthermore, we highlight current efforts in harmonization of terminologies, use of recent scientific tools to fill in food safety knowledge gaps, and international multi-stakeholder collaborations to tackle safety challenges. Although there cannot be a one-size-fits-all approach when it comes to the regulatory oversight for ensuring the safety of NFPS, there is a need to develop consensus-based structured protocols or workflows among stakeholders to facilitate comprehensive, robust, and internationally harmonized approaches. These efforts increase consumers' confidence in the safety of new foods and contribute toward fair practices in the international trade of such foods.

A review on the safety of growth factors commonly used in cultivated meat production.

Growth factors are commonly added to cell culture media in cellular agriculture to mimic the endogenous process of proliferation and differentiation of cells. Many of these growth factors are endogenous to humans and known to be present in the edible tissues and milk of food animals. However, there is little or no information on the use of growth factors intentionally added in food production before the advent of cultivated meat. Ten commonly used growth factors have been reviewed to include information on their mode of action, bioavailability, occurrence in food and food animals, endogenous levels in humans, as well as exposure and toxicological information drawn from relevant animal studies and human clinical trials with a focus on oral exposure. In addition, a comparison of homology of growth factors was done to compare the sequence homology of growth factors from humans and domestic animal species commonly consumed as food, such as bovine, porcine, and poultry. This information has been gathered as the starting point to determine the safety of use of growth factors in cultivated meat meant for human consumption. The change in levels of growth factors measured in human milk and bovine milk after pasteurization and high-temperature treatment is discussed to give an indication of how commercial food processing can affect the levels of growth factors in food. The concept of substantial equivalence is also discussed together with a conservative exposure estimation. More work on how to integrate in silico assessments into the routine safety assessment of growth factors is needed.

Assessment tools in food safety and adherence to the sanitary protocol for coping with COVID-19 in food services.

Food services, which must meet the sanitary standards for food production, needed to adapt to COVID-19 protocols in times of pandemic. In this context, the study of food safety assessment tools and sanitary protocols can contribute to the systematization of sanitary control actions and to the understanding how services have adapted to the new requirements. Thus, the present study aims to evaluate the relationships among the results of the assessment tools for food safety and adherence to the sanitary protocol for coping with COVID-19 in food services. Sanitary inspections were performed in 40 food services located in the center of the city of São Paulo - Brazil. Data were collected through the application of four checklists to evaluate the following: i. risk for FBD; ii. Good Handling Practices; iii. the structural requirements; and iv. The implementation of the COVID-19 sanitary protocol. The risk assessment tool was interpreted using a risk score, with each item weighted according to the risk for FBD. The results of the other tools were evaluated using the overall percentage of violated items. The results showed the predominance of high risk of GHP in the food services evaluated and a high percentage of violation of Good Handling Practices and structural requirements. The percentage of violation of the COVID-19 health protocol was moderate in most establishments. The degree of risk showed a high positive correlation with Good Handling Practices violations (Spearman ρ = 0.73; p < 0.001) and structural requirements (Spearman ρ = 0.63; p < 0.001). Regarding the tool for assessing adherence to the COVID-19 sanitary protocol, a moderate correlation was found with the violations of Good Handling Practices (Spearman ρ = 0.65; p < 0.001), with an emphasis on the thematic block relevant to food handlers. This discussion of the relationships among the results of the evaluation tools and their measurements may therefore be useful for improving the application of these tools by professionals involved in inspection activities, allowing the greater systematization of sanitary control actions and contributing to reduced risk of FBD.

Optical sensing for real-time detection of food-borne pathogens in fresh produce using machine learning.

Contaminated fresh produce remains a prominent catalyst for food-borne illnesses, prompting the need for swift and precise pathogen detection to mitigate health risks. This paper introduces an innovative strategy for identifying food-borne pathogens in fresh produce samples from local markets and grocery stores, utilizing optical sensing and machine learning. The core of our approach is a photonics-based sensor system, which instantaneously generates optical signals to detect pathogen presence. Machine learning algorithms process the copious sensor data to predict contamination probabilities in real time. Our study reveals compelling results, affirming the efficacy of our method in identifying prevalent food-borne pathogens, including Escherichia coli (E. coli) and Salmonella enteric, across diverse fresh produce samples. The outcomes underline our approach's precision, achieving detection accuracies of up to 95%, surpassing traditional, time-consuming, and less accurate methods. Our method's key advantages encompass real-time capabilities, heightened accuracy, and cost-effectiveness, facilitating its adoption by both food industry stakeholders and regulatory bodies for quality assurance and safety oversight. Implementation holds the potential to elevate food safety and reduce wastage. Our research signifies a substantial stride toward the development of a dependable, real-time food safety monitoring system for fresh produce. Future research endeavors will be dedicated to optimizing system performance, crafting portable field sensors, and broadening pathogen detection capabilities. This novel approach promises substantial enhancements in food safety and public health.

Bacteriocins: potentials and prospects in health and agrifood systems.

Bacteriocins are highly diverse, abundant, and heterogeneous antimicrobial peptides that are ribosomally synthesized by bacteria and archaea. Since their discovery about a century ago, there has been a growing interest in bacteriocin research and applications. This is mainly due to their high antimicrobial properties, narrow or broad spectrum of activity, specificity, low cytotoxicity, and stability. Though initially used to improve food quality and safety, bacteriocins are now globally exploited for innovative applications in human, animal, and food systems as sustainable alternatives to antibiotics. Bacteriocins have the potential to beneficially modulate microbiota, providing viable microbiome-based solutions for the treatment, management, and non-invasive bio-diagnosis of infectious and non-infectious diseases. The use of bacteriocins holds great promise in the modulation of food microbiomes, antimicrobial food packaging, bio-sanitizers and antibiofilm, pre/post-harvest biocontrol, functional food, growth promotion, and sustainable aquaculture. This can undoubtedly improve food security, safety, and quality globally. This review highlights the current trends in bacteriocin research, especially the increasing research outputs and funding, which we believe may proportionate the soaring global interest in bacteriocins. The use of cutting-edge technologies, such as bioengineering, can further enhance the exploitation of bacteriocins for innovative applications in human, animal, and food systems.

Food safety knowledge and practices among raw meat handlers and the microbial content of raw meat sold at Kumasi Abattoir Butchery Shops in Kumasi, Ghana.

BACKGROUND: Foodborne diseases affect nearly 600 million people each year, that is, one in every ten people, and their outbreaks are most common in low- and middle-income countries, particularly in Africa. This study investigated the food safety practices among raw meat handlers and the microbial quality of the meat from the butchery shops in Kumasi Abattoir, Ghana. METHODS: This study employed a descriptive cross-sectional study and collected quantitative data on factors associated with food safety and hygienic practices among raw meat handlers and the microbial quality of the raw meat using a structured questionnaire and standard laboratory methods, respectively. The study used all 50 beef vending shops in the butchery for questionnaire aspect and fresh beef samples were obtained from 10 vendors in the butchery shop. Appropriate methods were followed to analyse questionnaire data and meat samples. RESULTS: Most of the butchers (72%) were between the ages of 31 and 45, and they were predominantly Muslims (68%). Most of the respondents (48%) had basic education. All the respondents had food safety certificates from the local authority but needed adequate knowledge of meat safety. Most respondents (90%) handled meat and money with the same bare hands, thus contaminating the meat. The study showed that the maximum Total Viable Count (TVC), Total Staphylococcus Count (TSC), and Total Escherichia coli Count (TEC) were 5.60, 4.39 and 5.13 cfu/g, respectively. The study also revealed that all the meat samples were Salmonella species-free. CONCLUSIONS: Microorganisms in raw beef indicate a public health hazard. It gives a signal of a possible occurrence of food-borne intoxication and infection if not controlled. Environmental health officers in the Greater Kumasi area should organize food safety training and educate raw meat handlers on the importance of food safety and its consequences.

Microalgae as future food: Rich nutrients, safety, production costs and environmental effects.

The improvement of food security and nutrition has attracted wide attention, and microalgae as the most promising food source are being further explored. This paper comprehensively introduces basic and functional nutrients rich in microalgae by elaborated tables incorporating a wide variety of studies and summarizes factors influencing their accumulation effects. Subsequently, multiple comparisons of nutrients were conducted, indicating that microalgae have a high protein content. Moreover, controllable production costs and environmental friendliness prompt microalgae into the list that contains more promising and reliable future food. However, microalgae and -based foods approved and sold are limited strictly, showing that safety is a key factor affecting dietary consideration. Notably, sensory profiles and ingredient clarity play an important role in improving the acceptance of microalgae-based foods. Finally, based on the bottleneck in the microalgae food industry, suggestions for its future development were discussed.

Insect Antimicrobial Peptides as Guardians of Immunity and Beyond: A Review.

Antimicrobial peptides (AMPs), as immune effectors synthesized by a variety of organisms, not only constitute a robust defense mechanism against a broad spectrum of pathogens in the host but also show promising applications as effective antimicrobial agents. Notably, insects are significant reservoirs of natural AMPs. However, the complex array of variations in types, quantities, antimicrobial activities, and production pathways of AMPs, as well as evolution of AMPs across insect species, presents a significant challenge for immunity system understanding and AMP applications. This review covers insect AMP discoveries, classification, common properties, and mechanisms of action. Additionally, the types, quantities, and activities of immune-related AMPs in each model insect are also summarized. We conducted the first comprehensive investigation into the diversity, distribution, and evolution of 20 types of AMPs in model insects, employing phylogenetic analysis to describe their evolutionary relationships and shed light on conserved and distinctive AMP families. Furthermore, we summarize the regulatory pathways of AMP production through classical signaling pathways and additional pathways associated with Nitric Oxide, insulin-like signaling, and hormones. This review advances our understanding of AMPs as guardians in insect immunity systems and unlocks a gateway to insect AMP resources, facilitating the use of AMPs to address food safety concerns.

The Conflict between Regulatory Agencies over the 20,000-Fold Lowering of the Tolerable Daily Intake (TDI) for Bisphenol A (BPA) by the European Food Safety Authority (EFSA).

BACKGROUND: The European Food Safety Authority (EFSA) recommended lowering their estimated tolerable daily intake (TDI) for bisphenol A (BPA) 20,000-fold to 0.2 ng/kg body weight (BW)/day. BPA is an extensively studied high production volume endocrine disrupting chemical (EDC) associated with a vast array of diseases. Prior risk assessments of BPA by EFSA as well as the US Food and Drug Administration (FDA) have relied on industry-funded studies conducted under good laboratory practice protocols (GLP) requiring guideline end points and detailed record keeping, while also claiming to examine (but rejecting) thousands of published findings by academic scientists. Guideline protocols initially formalized in the mid-twentieth century are still used by many regulatory agencies. EFSA used a 21st century approach in its reassessment of BPA and conducted a transparent, but time-limited, systematic review that included both guideline and academic research. The German Federal Institute for Risk Assessment (BfR) opposed EFSA's revision of the TDI for BPA. OBJECTIVES: We identify the flaws in the assumptions that the German BfR, as well as the FDA, have used to justify maintaining the TDI for BPA at levels above what a vast amount of academic research shows to cause harm. We argue that regulatory agencies need to incorporate 21st century science into chemical hazard identifications using the CLARITY-BPA (Consortium Linking Academic and Regulatory Insights on BPA Toxicity) nonguideline academic studies in a collaborative government-academic program model. DISCUSSION: We strongly endorse EFSA's revised TDI for BPA and support the European Commission's (EC) apparent acceptance of this updated BPA risk assessment. We discuss challenges to current chemical risk assessment assumptions about EDCs that need to be addressed by regulatory agencies to, in our opinion, become truly protective of public health. Addressing these challenges will hopefully result in BPA, and eventually other structurally similar bisphenols (called regrettable substitutions) for which there are known adverse effects, being eliminated from all food-related and many other uses in the EU and elsewhere. https://doi.org/10.1289/EHP13812.

Mircrofabricating double-sided polydimethylsiloxane (PDMS) artificial phylloplane for microbial food safety research.

Leafy green surface microbiology studies often experience significant variations in results due to the heterogeneous nature of leaf surfaces. To provide a precise and controllable substitute, we microfabricated double-sided artificial leafy green phylloplanes using polydimethylsiloxane (PDMS) with a vinyl-terminated polyethylene glycol chain-based hydrophobicity modifier (PDMS-PEG) to modify PDMS hydrophobicity. We further tested the properties and applications of these artificial leaves, by examining the function of epicuticular wax, growth and survival of E. coli O157:H7 87-23 on the surface, and removal of attached E. coli cells via sanitation. The double-sided PDMS-PDMS-PEG leaves well-replicated their natural counterparts in macroscopic and microscopic structure, hydrophobicity, and E. coli O157:H7 87-23 attachment. After depositing natural epicuticular wax onto artificial leaves, the leaf surface wetting ability decreased, while E. coli O157:H7 87-23 surface retention increased. The artificial leaves supplied with lettuce lysate or bacterial growth media supported E. coli O157:H7 87-23 growth and survival similarly to those on natural leaves. In the sanitation test, the artificial lettuce leaves also displayed patterns similar to those of natural leaves regarding sanitizer efficiency. Overall, this study showcased the microfabrication and applications of double-sided PDMS-PDMS-PEG leaves as a replicable and controllable platform for future leafy green food safety studies.

Holistic food safety evaluation of herbs: methods for the determination of organic and inorganic trace contaminants in Moringa stenopetala as a case study.

Moringa stenopetala is considered a superfood due to the many bioactive compounds that it provides to the diet. However, like all edible plants, it is mandatory to guarantee food safety. Thus it is necessary to develop analytical methods that can rapidly and accurately determine hazardous pollutants, to evaluate compliance with food regulations. In this regard, two multi-component procedures were developed trying to cover some of the main organic and inorganic potential contaminants. A microwave-assisted digestion followed by electrothermal atomic absorption spectrometry was used for arsenic, cadmium, and lead determination, while a modification of the QuEChERS protocol followed by gas chromatography-tandem mass spectrometry was employed for the determination of 55 pesticides from different families. Both analytical methods were thoroughly validated according to international guidelines. The analyzed samples obtained from the Uruguayan market showed compliance with both, national and international, food regulations. The holistic approach employed in this research is not commonly presented in the literature, thus constituting a novel way to face food safety.

Anabolic steroids in livestock production: Background and implications for chemical food safety.

The use of steroids in livestock animals is a source of concern for consumers because of the risks associated with the presence of their residues in foodstuffs of animal origin. Technological advances such as mass spectrometry have made it possible to play a fundamental role in controlling such practices, firstly for the discovery of marker metabolites but also for the monitoring of these compounds under the regulatory framework. Current control strategies rely on the monitoring of either the parent drug or its metabolites in various matrices of interest. As some of these steroids also have an endogenous status specific strategies have to be applied for control purposes. This review aims to provide a comprehensive and up-to-date knowledge of analytical strategies, whether targeted or non-targeted, and whether they focus on markers of exposure or effect in the specific context of chemical food safety regarding the use of anabolic steroids in livestock. The role of new approaches in data acquisition (e.g. ion mobility), processing and analysis, (e.g. molecular networking), is also discussed.

Seafood waste derived carbon nanomaterials for removal and detection of food safety hazards.

Nanobiotechnology and the engineering of nanomaterials are currently the main focus of many researches. Seafood waste carbon nanomaterials (SWCNs) are a renewable resource with large surface area, porous structure, high reactivity, and abundant active sites. They efficiently adsorb food contaminants through π-π conjugated, ion exchange, and electrostatic interaction. Furthermore, SWCNs prepared from seafood waste are rich in N and O functional groups. They have high quantum yield (QY) and excellent fluorescence properties, making them promising materials for the removal and detection of pollutants. It provides an opportunity by which solutions to the long-term challenges of the food industry in assessing food safety, maintaining food quality, detecting contaminants and pretreating samples can be found. In addition, carbon nanomaterials can be used as adsorbents to reduce environmental pollutants and prevent food safety problems from the source. In this paper, the types of SWCNs are reviewed; the synthesis, properties and applications of SWCNs are reviewed and the raw material selection, preparation methods, reaction conditions and formation mechanisms of biomass-based carbon materials are studied in depth. Finally, the advantages of seafood waste carbon and its composite materials in pollutant removal and detection were discussed, and existing problems were pointed out, which provided ideas for the future development and research directions of this interesting and versatile material. Based on the concept of waste pricing and a recycling economy, the aim of this paper is to outline current trends and the future potential to transform residues from the seafood waste sector into valuable biological (nano) materials, and to apply them to food safety.

Occurrence of microplastics and metals in European seabass produced in different aquaculture systems: Implications for human exposure, risk, and food safety.

Microplastics (MPs) are emerging contaminants of increasing concern as they may cause adverse effects and carry other contaminants, which may potentially compromise human health. Despite occurring in aquatic ecosystems worldwide, the knowledge about MP presence in different aquaculture systems and their potential impact on seafood products is still limited. This study aimed to determine the levels of MPs in water, feed, and European seabass (Dicentrarchus labrax) from three relevant aquaculture systems and estimate human exposure to MPs and metals through seabass consumption. The recirculating aquaculture system (RAS) had the highest MP occurrence in water and feed. MP levels in seabass followed the aquaculture system's levels in water and feed, with RAS-farmed fish presenting the highest MP load, both in the fish gastrointestinal tract (GIT) and muscle, followed by pond-, and cage-farmed fish. MPs' characteristics across aquaculture systems and fish samples remained consistent, with the predominant recovered particles falling within the MP size range. The particles were visually characterized and chemically identified by micro-Fourier Transform Infrared Spectroscopy (µFTIR). Most of these particles were fibres composed of man-made cellulose and PET. MP levels in GIT were significantly higher than in muscle for pond- and RAS-farmed fish, MPs' bioconcentration factors >1 indicated bioconcentration in farmed seabass. Metal concentrations in fish muscle were below permissible limits, posing low intake risks for consumers according to the available health-based guidance values and estimated dietary scenarios.

Risk assessment of feed components of botanical origin - Approaches taken in the European Union.

In view of a continuous trend in replacing synthetic feed additives and especially flavouring compounds by botanical preparations, different aspects of the safety evaluations of plants and plant-derived preparations and components in feed are discussed. This includes risk assessment approaches developed by the European Food Safety Authority (EFSA) for phytotoxins regarding unintentional exposure of target animals and of consumers to animal derived food via carry-over from feed. Relevant regulatory frameworks for feed additives and feed contaminants in the European Union are summarised and the essentials of existing guidelines used in the safety evaluation of botanicals and their preparations and components in feed are outlined. The examples presented illustrate how the safety of the botanicals, their preparations and components present in feed is assessed. An outlook on possible future developments in risk assessment by applying new in vitro and in silico methodologies is given.

New insight into mycotoxins and bacterial toxins: Toxicity assessment, molecular mechanism and food safety (preface to the special issue of food and chemical toxicology on the outcomes of Myco & bacterial toxin).

The special issue "New Insight into Mycotoxins and Bacterial Toxins: Toxicity Assessment, Molecular Mechanism and Food Safety" in Food and Chemical Toxicology contains 19 articles on current hot topics in mycotoxins and bacterial toxins. Dietary exposure to mycotoxins and risk assessments are reported in this issue. Molecular mechanisms of multiple mycotoxins and emerging mechanisms of toxicity are especially concerned by researchers. Moreover, mycotoxin-detoxifying substances and antimicrobial agents are also fully investigated in the context. This special issue will help to further understand the mycotoxins and bacterial toxins, casting new light for the control of food safety.