Evaluation of Piperine as Natural Coformer for Eutectics Preparation of Drugs Used in the Treatment of Cardiovascular Diseases.

Piperine (PIP) was evaluated as a natural coformer in the preparation of multicomponent organic materials for enhancing solubility and dissolution rate of the poorly water-soluble drugs: curcumin (CUR), lovastatin (LOV), and irbesartan (IBS). A screening based on liquid assisted grinding technique was performed using 1:1 drug-PIP molar ratio mixtures, followed by differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) analyses. Three eutectic mixtures (EMs) composed of CUR-PIP, LOV-PIP, and IBS-PIP were obtained. Therefore, binary phase and Tamman's diagrams were constructed for each system to obtain the exact eutectic composition, which was 0.41:0.59, 0.29:0.71, and 0.31:0.69 for CUR-PIP, LOV-PIP, and IBS-PIP, respectively. Further, bulk materials of each system were prepared to characterize them through DSC, PXRD fully, Fourier transform infrared spectroscopy (FT-IR), and solution-state nuclear magnetic resonance (NMR) spectroscopy. In addition, the contact angle, solubility, and dissolution rate of each system were evaluated. The preserved characteristic in the PXRD patterns and FT-IR spectra of the bulk material of each system confirmed the formation of EM mixture without molecular interaction in solid-state. The formation of EM resulted in improved aqueous solubility and dissolution rate associated with the increased wettability observed by the decrease in contact angle. In addition, solution NMR analyses of CUR-PIP, LOV-PIP, and IBS-PIP suggested no significant intermolecular interactions in solution between the components of the EM. Hence, this study concludes that PIP could be an effective coformer to improve the solubility and dissolution rate of CUR, LOV, and IBS.

Cyclodextrin Complexed Lipid Nanoparticles of Irbesartan for Oral Applications: Design, Development, and In Vitro Characterization.

Irbesartan (IR) is an angiotensin II receptor antagonist drug with antihypertensive activity. IR bioavailability is limited due to poor solubility and first-pass metabolism. The current investigation aimed to design, develop, and characterize the cyclodextrin(s) (CD) complexed IR (IR-CD) loaded solid lipid nanoparticles (IR-CD-SLNs) for enhanced solubility, sustained release behavior, and subsequently improved bioavailability through oral administration. Based on phase solubility studies, solid complexes were prepared by the coacervation followed by lyophilization method and characterized for drug content, inclusion efficiency, solubility, and in vitro dissolution. IR-CD inclusion complexes demonstrated enhancement of solubility and dissolution rate of IR. However, the dissolution efficiency was significantly increased with hydroxypropyl-ßCD (HP-ßCD) inclusion complex than beta-CD (ßCD). SLNs were obtained by hot homogenization coupled with the ultrasonication method with IR/HP-ßCD inclusion complex loaded into Dynasan 112 and glycerol monostearate (GMS). SLNs were evaluated for physicochemical characteristics, in vitro release, differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), and physical stability at room temperature for two months. The optimized SLNs formulation showed particle size, polydispersity index, zeta potential, assay, and entrapment efficiency of 257.6 ± 5.1 nm, 0.21 ± 0.03, -30.5 ± 4.1 mV, 99.8 ± 2.5, and 93.7 ± 2.5%, respectively. IR-CD-SLN and IR-SLN dispersions showed sustained release of IR compared to the IR-CD inclusion complexes. DSC results complimented PXRD results by the absence of IR endothermic peak. Optimized IR-CD complex, IR-SLN, and IR-CD-SLN formulations were stable for two months at room temperature. Thus, the current IR oral formulation may exhibit improved oral bioavailability and prolonged antihypertensive activity, which may improve therapeutic outcomes in the treatment of hypertension and heart failure.

A rapid LC-MS/MS method for simultaneous determination of berberine and irbesartan in rat plasma: Application to the drug-drug pharmacokinetic interaction study after oral administration in rats.

A sensitive, reproducible, and specific liquid chromatography tandem mass spectrometry method was developed and validated to simultaneously determine the concentration of berberine (BBR) and irbesartan in Sprague-Dawley rat plasma, and applied to study the pharmacokinetic drug-drug interaction (DDI) between BBR and irbesartan in rats. In this method, diphenhydramine was used as the internal standard, and the liquid-liquid extraction method using ethyl acetate as the extraction agent was used for sample preparation. After extraction, the prepared samples were run on an Agilent Welchrom C18 column with the mobile phase consisting of methanol-acetonitrile-water solution with 0.5% formic acid (45:50:5, v/v/v) at a flow rate of 0.8 mL·min-1 . The analytes BBR, irbesartan, and diphenhydramine (IS) were detected using multiple reactions monitoring mode, with the ion transitions being m/z 336.1 → m/z 320.0, m/z 429.1 → m/z 206.9, and m/z 256.2 → m/z 167.0, respectively. In the rats' plasma, BBR had good linearity in the range of 0.5-100 ng·mL-1 with the lower limit of quantitation of 0.5 ng·mL-1 , and the accuracy, intra-day, and inter-day precision were less than 12.33%. Irbesartan had good linearity in the range of 20-1200 ng·mL-1 with the lower limit of quantification of 20 ng·mL-1 , and the accuracy, intra-day, and inter-day precision were less than 13.55%. The validated method was verified to meet the determination requirements of biological samples. It was the first time to study the pharmacokinetics of DDI between BBR and irbesartan successfully, which would be necessary and beneficial to explore the clinical safety and efficacy of the combination of BBR and irbesartan in the treatment of diabetic nephropathy.

Differential Scanning Calorimetry (DSC) on Sartan/Cyclodextrin Delivery Formulations.

Differential scanning calorimetry (DSC) is a widely utilized method for the interactions of drug molecules with drug delivery systems (DDSs). Herein is described a protocol for studying the interactions and entrapment efficiency of the prototype sartan losartan and the polydynamic, structurally similar irbesartan inside the nontoxic 2-hydroxypropyl-ß-cyclodextrin (2-HP-ß-CD). The thermal scan properties of both sartan molecules have been studied when physically mixed or complexed with the cyclodextrin. The thermograms indeed showed significant differences between the mixtures and complexes, establishing DSC as a valuable method to characterize the state of the drugs in these pharmaceutical formulations.

Antihypertensive activity and molecular interactions of irbesartan in complex with 2-hydroxypropyl-ß-cyclodextrin.

Irbesartan (IRB) exerts beneficial effects either alone or in combination with other drugs on numerous diseases, such as cancer, diabetes, and hypertension. However, due to its high lipophilicity, IRB does not possess the optimum pharmacological efficiency. To circumvent this problem, a drug delivery system with 2-hydroxypropyl-ß-cyclodextrin (2-HP-ß-CD) was explored. The 1:1 complex between IRB and 2-HP-ß-CD was identified through ESI QTF HRMS. Dissolution studies showed a higher dissolution rate of the lyophilized IRB-2-HP-ß-CD complex than the tablet containing IRB at pH = 1.2. DSC results revealed the differences of the thermal properties between the complex and various mixtures consisting of the two components, namely IRB and 2-HP-ß-CD. Interestingly, depending on the way the mixture preparation was conducted, different association between the two components was observed. Molecular dynamics (MD) simulations predicted the favorable formation of the above complex and identified the dominant interactions between IRB and 2-HP-ß-CD. In vitro pharmacological results verified that the inclusion complex not only preserves the binding affinity of IRB for AT1R receptor, but also it slightly increases it. As the complex formulation lacks the problems of the tablet, our approach is a promising new way to improve the efficiency of IRB.

Downstream processing of irbesartan nanocrystalline suspension and mini-tablet development - Part II.

The objectives of this study were to evaluate the impact of formulation variables on the drying of nanocrystalline suspensions either via bead layering or spray granulation and develop mini-tablets from the dried nanocrystalline powders. Irbesartan (crystalline Form B), a poorly soluble drug substance was chosen as a model compound. An optimized irbesartan nanocrystalline suspension with a mean particle size of 300 nm was utilized for the downstream processing. Irbesartan nanocrystalline suspension was dried either by layering onto the microcrystalline cellulose beads (i.e. 200 or 500 µm) or by granulation (mannitol or microcrystalline cellulose as substrates) at two different drug loadings (i.e. 10% or 30% w/w). Smaller size beads layered with nanocrystals resulted in faster dissolution profiles compared to larger size beads at both the studied drug loadings (i.e. 10 and 30% w/w). Mannitol granules containing irbesartan nanocrystals resulted in faster dissolution profiles compared to microcrystalline cellulose granules. Microcrystalline cellulose beads and mannitol granules containing irbesartan nanocrystals (i.e. 30% w/w drug loading) were further compressed into mini-tablets. Mini-tablets retained fast drug dissolution characteristics of the dried powders. The results from this study indicated that the spray granulation is a superior drying approach compared to bead layering for drying of irbesartan nanocrystalline suspension and mini-tablet development.

Formulation and performance of Irbesartan nanocrystalline suspension and granulated or bead-layered dried powders - Part I.

Nanocrystalline suspensions offer a promising approach to improve the dissolution rate of BCS Class II/IV drugs and hence oral bioavailability. Irbesartan (crystalline Form B), a poorly soluble drug substance was chosen as a model compound for the study. The objectives of the study were to formulate Irbesartan nanocrystalline suspension via media milling, study the effects of process and formulation variables on particle size reduction, and evaluate bead layering or spray granulation as drying processes. A Design of Experiment approach was utilized to understand the impact of formulation variables on particle size reduction via media milling. Drug concentration and type of stabilizer were found to be significant in particle size reduction. Optimized Irbesartan nanocrystalline suspension (i.e. at 10% w/w with 1% w/w poloxamer 407) showed superior in vitro dissolution profile compared to unmilled suspension. Optimized Irbesartan nanocrystalline suspension was converted into dried powders either by bead layering (with microcrystalline cellulose) or by spray granulation (either with mannitol or microcrystalline cellulose). DSC and PXRD studies revealed that Irbesartan remained crystalline post drying. Microcrystalline cellulose beads layered with Irbesartan nanocrystals showed about 65% drug dissolution within the first 10 min of dissolution study. Mannitol granules containing Irbesartan nanocrystals were fast dissolving (i.e. >90% drug dissolution within 10 min) compared to microcrystalline cellulose granules (i.e. approx. 46% drug dissolution within 10 min). Irbesartan nanocrystalline suspension had the fastest dissolution rates (i.e. >90% drug dissolution in two minutes) followed by mannitol-based granules containing dried Irbesartan nanocrystals (i.e. >90% drug dissolution in ten minutes).

Highly Soluble Glimepiride and Irbesartan Co-amorphous Formulation with Potential Application in Combination Therapy.

One-third of the population of the USA suffers from metabolic syndrome (MetS). Treatment of patients with MetS regularly includes drugs prescribed simultaneously to treat diabetes and cardiovascular diseases. Therefore, the development of novel multidrug formulations is recommended. However, the main problem with these drugs is their low solubility. The use of binary co-amorphous systems emerges as a promising strategy to increase drug solubility. In the present study, irbesartan (IBS) and glimepiride (GMP), class II active pharmaceutical ingredients (API), widely used in the treatment of arterial hypertension and diabetes, were selected to develop a novel binary co-amorphous system with remarkable enhancement in the dissolution of both APIs. The phase diagram of IBS-GMP was constructed and co-amorphous systems were prepared by melt-quench, in a wide range of compositions. Dissolution profile (studied at pH 1.2 and 37°C for mole fractions 0.01, 0.1, and 0.5) demonstrated that the xGMP = 0.01 formulation presents the highest enhancement in its dissolution. GMP went from being practically insoluble to reach 3.9 ± 0.9 µg/mL, and IBS showed a 12-fold increment with respect to the dissolution of its crystalline form. Infrared studies showed that the increase in the dissolution profile is related to the intermolecular interactions (hydrogen bonds), which were dependent of composition. Results of structural and thermal characterization performed by XRD and DSC showed that samples have remained in amorphous state for more than 10 months of storage. This work contributes to the development of a highly soluble co-amorphous drugs with potential used in the treatment of MetS.

Impact of Drug-Polymer Miscibility on Enthalpy Relaxation of Irbesartan Amorphous Solid Dispersions.

PURPOSE: Drug-polymer miscibility has been proposed to play a critical role in physical stability of amorphous solid dispersions (ASDs). The purpose of the current work was to investigate the role of drug-polymer miscibility on molecular mobility, measured as enthalpy relaxation (ER) of amorphous irbesartan (IBS) in ASDs. METHODS: Two polymers, i.e. polyvinylpyrrolidone K30 (PVP K30) and hydroxypropyl methylcellulose acetate succinate (HPMCAS), were used to generate ASDs with 10% w/w of the polymer. Drug-polymer miscibility was determined using melting point depression (MPD) method. Molecular mobility was assessed from ER studies at a common degree of undercooling (DOU) (Tg - 13.0°C ± 0.5°C). RESULTS: IBS exhibited higher miscibility in PVP K30 as compared to HPMCAS at temperature > 140°C. However, extrapolation of miscibility data to storage temperature (62°C) using Flory-Huggins (F-H) theory revealed a reversal of the trend. Miscibility of IBS was found to be higher in HPMCAS (2.6%) than PVP K30 (1.3%) at 62°C. Stretched relaxation time (τß) of 17.4365 h and 7.0886 h was obtained for IBS-HPMCAS and IBS-PVP K30 ASDs, respectively. CONCLUSION: Miscibility of drug-polymer at storage temperature explained the behavior of the molecular mobility, while miscibility near the melting point provided a reverse trend. Results suggest that drug-polymer miscibility determined at temperatures higher than the storage temperature should be viewed cautiously.