Digital Thermal Necrosis Resulting in Amputation After Removing a Tungsten Carbide Ring With a High-Speed Metal Burr: A Case Report.

CASE: A 41-year-old man removed a tungsten carbide ring from his left index finger by cutting it off with a high-speed metal burr. The patient presented two days later with a pink and perfused left index finger with circumferential dry gangrene along the area of the ring, active flexor and extensor tendon excursion, and decreased sensation distally. Within 24 hours, the wound developed into wet gangrene and diffuse cyanosis requiring amputation. CONCLUSION: After reviewing previously documented methods to remove tungsten carbide rings, the authors conclude clinicians should be cognizant of the potential complications associated with the use of a high-speed metal burr.

Modular Toolbox as Snap Jewelry for Biomimetic Synthesis of Multifunctional Amino Acid Surfactants Inspired by Melanin.

Amino acid surfactants have gained significant importance in overcoming the limitations of conventional surfactants, notably, their low biocompatibility and biodegradability. However, the current amino acid surfactants lack multifunctional properties due to the nonreactivity of their aliphatic chains, necessitating the development of a new type of amino acid surfactant. A novel melanin-like amino acid surfactant and a biomimetic synthesis route were devised by mimicking the biosynthesis of melanin. Renewable natural polyphenol compounds with catechol moieties were utilized as building blocks for the hydrophobic group. In a proof-of-concept experiment, ethyl protocatechuate was oxidized to o-quinone and subsequently covalently linked to the amino group of lysine via Michael addition. The chemical structure was verified using liquid chromatography-tandem mass spectroscopy. The melanin-like amino acid surfactant exhibited excellent surface-active properties, with a critical micelle concentration of 1.59 mN m-1. Furthermore, it demonstrated remarkable emulsifying, foaming, solubilizing, dispersing, and wetting capabilities. Notably, it also possessed multifunctionality, including antibacterial activity, antioxidant activity, robustness, and mildness. These outstanding properties indicate significant potential for various applications. This strategy offers innovative insights and a versatile, modular toolbox for synthesizing multifunctional amino acid surfactants that mimic melanin. The approach allows for the easy interchange of o-quinone building blocks, which is akin to snap jewelry.

The toxicological assessment of hazardous elements (Pb, Cd and Hg) in low-cost jewelry for adults from Chinese E-commerce platforms: In situ analysis by portable X-ray fluorescence measurement.

This article focusses on the environmental implications of low-cost jewelry for adults from Chinese e-commerce platforms ((n = 8) with heavy metal impurities (Pb, Cd and Hg) and their potential impact on human health and the environment. The study highlights the advantages of using portable X-ray fluorescence (pXRF) analysis for rapid, non-destructive, and in situ analysis of heavy metals in jewelry. The results reveal that all products (n = 106) contained heavy metals at varying levels, Hg being the most commonly detected heavy metal. The fact that 71% of the samples exceeded the EU limit for Pb and 51% exceeded the EU limit for Cd is alarming and highlights the need for stricter regulations and monitoring of the jewelry industry to mitigate the risks posed by heavy metals in the environment. The study emphasizes the importance of using pXRF analysis to identify heavy metals in jewelry and address the literature gap in environmental risk assessments of Pb, Cd, and Hg in low-cost jewelry for adults from China. In general, the findings call for urgent action to ensure the safety of consumers and prevent environmental pollution by strengthening regulations and monitoring the jewelry industry.

Metals as toxicants in event-based expedited production of children's jewelry.

Globally, the hazardous substance in children's goods is of great concern. Toxic chemicals are potentially harmful to the health and growth of infants and children. Lead (Pb) and cadmium (Cd)-contaminated children's jewelry is widely encountered in many countries. This study aims to determine the concentration of metal toxicants (Pb, Cd, Ni, Cu, Zn, Co, and Fe) in event-based (Independence Day festival) children's jewelry, considering time-limited and fast production products that may compromise the quality and safety parameters during manufacturing. The determinations are for the time-constraint industrial production of children's jewelry in the context of the toxic substances in a variety of base materials used. This is the first time event-based children's jewelry has been monitored and critically assessed for metal contamination. Forty-two samples, including metallic, wooden, textile, rubber, plastic, and paint-coated plastic children's jewelry, were tested. Seventy-four percent of samples detected Pb and Cd in quantifiable amounts. Ni in 71%, Cu in 67%, Co in 43%, and Zn and Fe were detected in 100% samples with quantifiable amounts. Twenty-two ID-CJ samples exceeded the US regulatory limit for Pb and four samples for Cd. However, twenty-nine samples for Pb, eleven for Cd, five for Co, and one for Cu exceeded the EU regulatory limit. The highest concentration of Pb was found in paint-coated plastic jewelry, and the highest Cd was found in metallic jewelry. These results suggest that the potential hazards of event-based children's jewelry deserve the attention of government agencies seeking to limit children's exposure to toxic chemicals. Intergovernmental organizations and individual countries regulate chemicals in consumer products, but a coordinated international approach is lacking. Some continents and countries still lack in regulations for children's products, especially jewelry, and toys.

Gold: not just jewelry .

Plain language summary From jewels and coinage to anticancer and antiviral agents, the peculiar 'soft' character as well as physicochemical, redox and ligand exchange properties of gold can be exploited to design novel bioactive complexes, which may open up new perspectives to the development of drugs for therapeutic and diagnostic applications.

From jewels and coinage to anticancer and antiviral agents, the peculiar 'soft' character as well as physicochemical, redox and ligand exchange properties of gold can be exploited to design novel bioactive complexes, which may open up new perspectives to the development of drugs for therapeutic and diagnostic applications.

An investigation into the present levels of contamination in children's toys and jewelry in different countries: a systematic review.

Contamination by heavy metals and toxic elements in children's toys and jewelry is an ongoing challenge in different countries. These contaminants can enter the children's body via oral, dermal, and respiratory routes, leading to adverse health effects. This study aimed to investigate the present levels of contamination in children's toys and jewelry in 15 countries, including UK, Saudi Arabia, Cambodia, China, Kosovo, Nigeria, North American, Kazakhstan, UAE, Pakistan, Iraq, Israel, West Bank/Palestine, Czech Republic, and Turkey. In this review, the legislation and recommendation of the United States (U.S.), the Bureau of Indian Standards (BIS), Turkish Standards Institute (TSE), Canada, and the European Union (E.U.) on toxic elements in toys and jewelry are introduced. Plastic or metallic toys and children's jewelry still have the most severe toxic elements pollution and the existence of lead (Pb), nickel (Ni), cadmium (Cd), arsenic (As), mercury (Hg), chromium (Cr), copper (Cu), selenium (Se), barium (Ba), Zinc (Zn), cobalt (Co), manganese (Mn), bisphenol A, phthalates, parabens, azo dyes, and flame retardants has been regarded as an ongoing challenge in these articles. Finally, this review offers benchmarking of the concentrations of toxic elements in all types of children's toys and jewelry in different nations.

Environmental assessment in fine jewelry in the U.S.-Mexico's Paso del Norte region: A qualitative study via X-ray fluorescence spectroscopy.

Heavy metal contamination in raw materials has spread widely in the United States. The high increased number of recalls in consumer products and the lack of stricter regulations in the raw materials to be used in the jewelry industry have raised concerns among consumers. Studies in low-cost jewelry have shown the presence and high content of heavy metals; this environmental problem led to a child's death after swallowing a charm containing elevated levels of lead (Pb). Exposure to heavy metals, through inhalation, mouth, and skin contact, causes adverse health effects in children and adults. Exposure to lead affects mainly the nervous system and brain development; exposure to cadmium (Cd) causes damage to liver, kidneys, and lungs, and potentially leads to cancer; exposure to nickel (Ni) causes severe dermatitis. Thus, the importance and impact of studies of this nature cannot be overstated. As heavy metal contamination has increased in the United States, this research fills an important knowledge gap between previous studies conducted on low-cost jewelry and fine jewelry. In this study, conducted in the Paso del Norte region, one hundred and forty-three pieces of fine jewelry were evaluated for the presence of heavy metals using X-ray fluorescence (XRF) spectroscopy. Our study showed that 61 samples (42.7 %) exhibited the presence of Ni in the metal alloy, prevailing in jewelry pieces with lower percentage of gold. Eighteen samples showed the presence of Pb in gemstones, 11 pieces of these samples (7.7 % total) had <33.3 % gold (≤10 K); however, none of the samples showed the presence of Pb in the metal alloy. Further research is needed to evaluate the bioaccessibility of Pb in these gemstones, which may pose a potential health hazard to children and adults in the US Paso del Norte region and throughout the world.

An analysis of the utilisation of medical identification jewellery among children and young adults with type 1 diabetes mellitus in Australia.

AIMS: People with type 1 diabetes mellitus (T1DM) are at risk of life-threatening illness. Medical jewellery is recommended for emergencies, but its uptake is unknown. This study assessed the use of medical jewellery among people with T1DM aged 0-24 years in Australia. METHODS: A cross sectional analysis of subscription data to the largest medical identification jewellery service in Australia was analysed by age, sex and geographic location using Australian population data from 2018. RESULTS: There were 1599 people with T1DM aged 0-24 in the database, but only 1061 had an active subscription, corresponding to an active subscription rate of 13.28/100,000 population or ~5% of the estimated patient population. Half of the active subscribers were male (543/1061, 51/3%). The average age of active subscribers was 17; very few (n = 12, 1.1%) were aged less than 5; and the highest number (n = 141, 39%) was in the 20-24 age group. Active subscription rates varied significantly by geographic location. 88.4% of active subscribers had a diagnosis of T1DM or equivalent inscribed on their emblem, while engraved instructions for management in an emergency were only included in 1.8% of records (n = 19). CONCLUSIONS: Medical jewellery subscription rates were lower than expected; increased with age; and varied significantly by state/territory. The use of medical identification jewellery may be limited by the lack of suitable engraved instructions for use in an emergency. Factors leading to low use should be addressed. Photo 1 Medical Jewellery with emblem.

Concentrações de metais em poeira depositada em casas de trabalhadores informais e domiciliares da cadeia produtiva de joias e bijuterias de Limeira, SP: avaliação de risco à saúde infantil / Metal concentrations in dust deposited in the homes of informal and home-based workers in the jewelry and fashion jewelry production of Limeira, SP: risk assessment for children's health

Introdução: O trabalho informal é acompanhado de diversas particularidades, além do manuseio de produtos químicos sem equipamentos adequados, pode acontecer a exposição passiva de familiares ou amigos próximos, como por exemplo as crianças. Na cidade de Limeira, no interior de São Paulo, há a produção informal de joias e bijuterias, envolvendo atividades que vão desde a montagem de peças até a solda. Objetivos: este estudo avaliou a exposição de crianças à poeiras contendo metais, nas residências de trabalhadores informais e domiciliares da cadeia produtiva de joias e bijuterias de Limeira. Método: foram coletadas amostras de poeira com lenços eletrostáticos em 21 domicílios do grupo exposto e 23 do grupo controle e determinados os Elementos Potencialmente Tóxicos (EPT) Cr, Sn, Mn, Ni, Cu, Zn, Cd, Pb e As, nos ambientes. As análises foram realizadas no Instituto de Pesquisas Tecnológicas do Estado de São Paulo (IPT), por ICP-MS. Também, foram cedidos os resultados das concentrações de EPT no sangue de uma subamostra de crianças, presentes na população de estudo, pela coordenadora do projeto (KPKO). Resultados: As concentrações de Cr, Mn, Ni, Cu, Zn, As, Cd e Sn na poeira doméstica foram significativamente maiores no grupo exposto (<0,05), assim como as concentrações de Pb e Cd no sangue das crianças do grupo exposto (<0,05). As concentrações de EPT na poeira doméstica e no sangue das crianças apresentaram correlação moderada para Cr (Coeficiente de Correlação de Spearman (Rho) 0,40), Zn (Rho -0,43) e As (Rho 0,40), e uma forte correlação para Cd (Rho 0,80) (p <0,05). Conclusões: Os resultados do estudo apontaram riscos para a exposição infantil ao Cd, As e Cr durante a produção informal e doméstica de joias e bijuterias, salientando a importância de proteger a saúde infantil através da promoção de ações de segurança. Adicionalmente, os lenços eletrostáticos se mostraram ferramentas de baixo custo e eficazes para avaliação da exposição a EPT.

Introduction: Informal work is followed by several particularities, besides the handling of chemicals without proper equipment, there may happen the passive exposure of family members or close friends, such as children. In the city of Limeira, in the interior of São Paulo, there is informal jewelry production, involving activities ranging from assembling pieces to welding. Objectives: This study evaluated the exposure of children to dust containing metals in the homes of informal and home-based workers in the jewelry production industry in Limeira. Method: dust samples were collected with electrostatic cloths from 21 households in the exposed group and 23 in the control group, and the Potentially Toxic Elements (PTE) Cr, Sn, Mn, Ni, Cu, Zn, Cd, Pb, and As were determined in the environments. The analyses were carried out at the Technological Research Institute of the State of São Paulo (IPT), by ICP-MS. Also, the results of PTE concentrations in the blood of a subsample of children, present in the study population, were provided by the project coordinator (KPKO). Results: Concentrations of Cr, Mn, Ni, Cu, Zn, As, Cd and Sn in household dust were significantly higher in the exposed group (<0.05), as were concentrations of Pb and Cd in the blood of children in the exposed group (<0.05). PTE concentrations in house dust and children's blood showed moderate correlation for Cr (Spearman's Correlation Coefficient (Rho) 0.40), Zn (Rho -0.43) and As (Rho 0.40), and a strong correlation for Cd (Rho 0.80) (p <0.05). Conclusions: The results of the study indicated risks for children's exposure to Cd, As and Cr during informal, domestic jewelry production, highlighting the importance of protecting children's health by promoting safety actions. Additionally, electrostatic cloths proved to be low-cost and effective tools for assessing exposure to PTE.

The Effects of the Activity of Making Jewelry From Beads on the Anxiety Levels of Children With Cancer: A Randomised Controlled Study.

Background: Children hospitalized for cancer treatment are known to experience high levels of anxiety. This study aimed to examine the effects of making jewelry from beads on the state and trait anxiety levels of children with cancer. Methods: This parallel group, randomized controlled trial was conducted on 62 children aged 7-18 who were being treated for cancer. The children were selected using the random sampling method. The jewelry-making sessions with the children in the intervention group were held twice a week for four weeks. Data were analysed using the chi-square test, the Student's t-test, the independent samples t-test and linear regression. Results: The state anxiety levels of the children in the intervention group decreased both in the first week and the fourth week after making jewelry. The difference in the average post-test scores between the two groups was found to be significant (p < .05). The fourth week average trait anxiety score of the children in the intervention group decreased (M = 33.2) in comparison to the average score of the control group (M = 36.5). The difference between the two groups was found to be significant (p < .001). Discussion: This study found that the activity of making jewelry from beads was effective in reducing the state and trait anxiety levels of children with cancer.

Metal Jewelry Craft Design Based on Computer Vision.

Combining computer vision technology with process design, a new design and production method is obtained, which breaks through the limitations of traditional jewelry creation and provides new possibilities for the realization of complex jewelry structures. When technology no longer becomes the bottleneck of artistic expression, the space of art will be greatly expanded. Science and technology leading design method has become a new way to assist jewelry artists in subjective creation. According to various thoughts and ideas in design, establishing the corresponding algorithm rules and parameters can generate the scheme through calculation. The design result obtained in this way not only has a scientifically logical basis but also obtains the result beyond the normal imagination space due to the intelligent design process. This paper tries to apply computer vision technology to modern jewelry design, analyzes several aspects of computer vision application in process design, and combines the latest technical means to put forward algorithms for verification. The results prove that computer vision can improve the efficiency of crafts design significantly.

The wristwatch - A supplemental tool for determining time of death.

Estimation of the time of death (TOD) is a central task to forensic pathologists. The current gold standard method for TOD-estimation is only applicable in the first 24 h post-mortem and it is advisable to employ multiple methods, if possible. A wristwatch found on the decedent can be a valuable additional tool for TOD-estimation. This technical report provides a brief overview of the two major watch types - mechanical and quartz-based timepieces - and a step-by-step guide to using these for TOD-estimation. The methods are demonstrated using case illustrations.

Contamination by hazardous elements in low-priced children's plastic toys bought on the local markets of Karachi, Pakistan.

Children's plastic toys may contain toxic metals to which infants and young children can be orally exposed and may pose acute or chronic adverse health effects. This research aims to evaluate the total metal concentrations (TMCs) of Pb, Cd, Cr, Ni, Zn, Cu, and Mn in children's plastic toys bought in the local markets of Karachi, Pakistan, and compare TMCs to different toy safety regulatory limits. A total of 44 children's plastic toys sourced in the Karachi local markets were analyzed by an atomic absorption spectrophotometer for contamination of hazardous elements. Toy samples were divided into two groups: plastic toys (DCT) and plastic toys with paints or coatings (DPCT). For plastic toys, 83% (19) of samples had TMCs that exceeded European Union (EU) toy safety regulation limits for Pb, and 65% (15) of samples that exceeded for Cd. For plastic toys with paints or coating, 43% (9) of samples had TMCs that exceeded EU migration limits for Pb and 24% (5) for Cd. More than 20 samples exceeded the United States Consumer Product Safety Commission (US CPSC), Canadian, and Bureau of Indian Standards (BIS) toy safety regulation limits. In toy samples (n = 44), very high TMCs of Pb (64%), Cd (45%), Cr (5%), and Ni (2%) were observed. Zn, Cu, and Mn TMCs existed but were below the regulation limits. The contamination levels of Pb, Cd, Cr, and Ni and smaller extent of Zn, Cu, and Mn still pose health issues in children and may cause serious problems in their health.

Nickel release from metal items in contact with skin: a comparison of methods and practical implications for regulation in Europe.

Contact allergy to Nickel is the most prevalent contact allergy in western societies. This has led to regulation for metallic items that come into prolonged and direct contact with the skin, such as buttons on clothing, belt buckles, jewelry and watches. In Europe, the legal provision is based on a test in which there is a limit to the amount of nickel that may be released from the item to an artificial sweat solution (EN 1811). This test is costly and has reproducibility issues. The resulting undertesting of items placed on the market, leads to many nickel releasing non-compliant articles being available in spite of the regulations that are in place. In this study, the performance of the standard release test is compared to the performance of a rapid nickel spot test based on dimethylglyoxime (DMG-test). The data suggest that using the rapid DMG-test for compliance testing is sufficiently equivalent to the current gold standard of EN 1811. Previously published comparisons between the DMG-test and EN 1811 did not consider the effect of accelerated wear and corrosion testing according to EN 12472. This study shows that by applying EN 12472, the number of deviating results between the DMG-test and EN 1811 decreases significantly. Regarding consumer protection, it is necessary for wear and corrosion resistance to be considered.