Expanding syphilis test uptake using rapid dual self-testing for syphilis and HIV among men who have sex with men in China: A multiarm randomized controlled trial.

BACKGROUND: Low syphilis testing uptake is a major public health issue among men who have sex with men (MSM) in many low- and middle-income countries. Syphilis self-testing (SST) may complement and extend facility-based testing. We aimed to evaluate the effectiveness and costs of providing SST on increasing syphilis testing uptake among MSM in China. METHODS AND FINDINGS: An open-label, parallel 3-arm randomized controlled trial (RCT) was conducted between January 7, 2020 and July 17, 2020. Men who were at least 18 years of age, had condomless anal sex with men in the past year, reported not testing for syphilis in the last 6 months, and had a stable residence with mailing addresses were recruited from 124 cities in 26 Chinese provinces. Using block randomization with blocks of size 12, enrolled participants were randomly assigned (1:1:1) into 3 arms: standard of care arm, standard SST arm, and lottery incentivized SST arm (1 in 10 chance to win US$15 if they had a syphilis test). The primary outcome was the proportion of participants who tested for syphilis during the trial period and confirmed with photo verification and between arm comparisons were estimated with risk differences (RDs). Analyses were performed on a modified intention-to-treat basis: Participants were included in the complete case analysis if they had initiated at least 1 follow-up survey. The Syphilis/HIV Duo rapid test kit was used. A total of 451 men were enrolled. In total, 136 (90·7%, 136/150) in the standard of care arm, 142 (94·0%, 142/151) in the standard of SST arm, and 137 (91·3%, 137/150) in the lottery incentivized SST arm were included in the final analysis. The proportion of men who had at least 1 syphilis test during the trial period was 63.4% (95% confidence interval [CI]: 55.5% to 71.3%, p = 0.001) in the standard SST arm, 65.7% (95% CI: 57.7% to 73.6%, p = 0.0002) in the lottery incentivized SST arm, and 14.7% (95% CI: 8.8% to 20.7%, p < 0.001) in the standard of care arm. The estimated RD between the standard SST and standard of care arm was 48.7% (95% CI: 37.8% to 58.4%, p < 0.001). The majority (78.5%, 95% CI: 72.7% to 84.4%, p < 0.001) of syphilis self-testers reported never testing for syphilis. The cost per person tested was US$26.55 for standard SST, US$28.09 for the lottery incentivized SST, and US$66.19 for the standard of care. No study-related adverse events were reported during the study duration. Limitation was that the impact of the Coronavirus Disease 2019 (COVID-19) restrictions may have accentuated demand for decentralized testing. CONCLUSIONS: Compared to standard of care, providing SST significantly increased the proportion of MSM testing for syphilis in China and was cheaper (per person tested). TRIAL REGISTRATION: Chinese Clinical Trial Registry: ChiCTR1900022409.

Using social media to crowdsource collection of urine samples during a national pandemic.

The COVID-19 pandemic and subsequent lockdown had a substantial impact on normal research operations. Researchers needed to adapt their methods to engage at-home participants. One method is crowdsourcing, in which researchers use social media to recruit participants, gather data, and collect samples. We utilized this method to develop a diagnostic test for Interstitial Cystitis/Bladder Pain Syndrome (IC/BPS). Participants were recruited via posts on popular social-media platforms, and enrolled via a website. Participants received and returned a mail kit containing bladder symptom surveys and a urine sample cup containing room-temperature preservative. Using this method, we collected 1254 IC/BPS and control samples in 3 months from all 50 United States. Our data demonstrate that crowdsourcing is a viable alternative to traditional research, with the ability to reach a broad patient population rapidly. Crowdsourcing is a powerful tool for at-home participation in research, particularly during the lockdown caused by the COVID-19 pandemic.

Development of SARS-CoV-2 packaged RNA reference material for nucleic acid testing.

Nucleic acid tests to detect the SARS-CoV-2 virus have been performed worldwide since the beginning of the COVID-19 pandemic. For the quality assessment of testing laboratories and the performance evaluation of molecular diagnosis products, reference materials (RMs) are required. In this work, we report the production of a lentiviral SARS-CoV-2 RM containing approximately 12 kilobases of its genome including common diagnostics targets such as RdRp, N, E, and S genes. The RM was measured with multiple assays using two different digital PCR platforms. To measure the homogeneity and stability of the lentiviral SARS-CoV-2 RM, reverse transcription droplet digital PCR (RT-ddPCR) was used with in-house duplex assays. The copy number concentration of each target gene in the extracted RNA solution was then converted to that of the RM solution. Their copy number values are measured to be from 1.5 × 105 to 2.0 × 105 copies/mL. The RM has a between-bottle homogeneity of 4.80-8.23% and is stable at 4 °C for 1 week and at -70 °C for 6 months. The lentiviral SARS-CoV-2 RM closely mimics real samples that undergo identical pre-analytical processes for SARS-CoV-2 molecular testing. By offering accurate reference values for the absolute copy number of viral target genes, the developed RM can be used to improve the reliability of SARS-CoV-2 molecular testing.

Microchip RT-PCR Detection of Nasopharyngeal SARS-CoV-2 Samples.

Fast, accurate, and reliable diagnostic tests are critical for controlling the spread of the coronavirus disease 2019 (COVID-19) associated with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection. The current gold standard for testing is real-time PCR; however, during the current pandemic, supplies of testing kits and reagents have been limited. We report the validation of a rapid (30 minutes), user-friendly, and accurate microchip real-time PCR assay for detection of SARS-CoV-2 from nasopharyngeal swab RNA extracts. Microchips preloaded with COVID-19 primers and probes for the N gene accommodate 1.2-µL reaction volumes, lowering the required reagents by 10-fold compared with tube-based real-time PCR. We validated our assay using contrived reference samples and 21 clinical samples from patients in Canada, determining a limit of detection of 1 copy per reaction. The microchip real-time PCR provides a significantly lower resource alternative to the Centers for Disease Control and Prevention-approved real-time RT-PCR assays with comparable sensitivity, showing 100% positive and negative predictive agreement of clinical samples.

COVID-19 Pandemic Planning: Simulation Models to Predict Biochemistry Test Capacity for Patient Surges.

BACKGROUND: Patient surges beyond hospital capacity during the initial phase of the COVID-19 pandemic emphasized a need for clinical laboratories to prepare test processes to support future patient care. The objective of this study was to determine if current instrumentation in local hospital laboratories can accommodate the anticipated workload from COVID-19 infected patients in hospitals and a proposed field hospital in addition to testing for non-infected patients. METHODS: Simulation models predicted instrument throughput and turn-around-time for chemistry, ion-selective-electrode, and immunoassay tests using vendor-developed software with different workload scenarios. The expanded workload included tests from anticipated COVID patients in 2 local hospitals and a proposed field hospital with a COVID-specific test menu in addition to the pre-pandemic workload. RESULTS: Instrumentation throughput and turn-around time at each site was predicted. With additional COVID-patient beds in each hospital, the maximum throughput was approached with no impact on turnaround time. Addition of the field hospital workload led to significantly increased test turnaround times at each site. CONCLUSIONS: Simulation models depicted the analytic capacity and turn-around times for laboratory tests at each site and identified the laboratory best suited for field hospital laboratory support during the pandemic.

Pooling samples: a testing option for SARS-CoV-2 during a supply shortage.

Pooling of 1 positive sample with up to 5 negative samples prior to testing with the Cepheid GenXpert SARS-CoV-2 assay did not adversely impact detection of positive samples. At our current prevalence of 2%, it could save up to 70% of the test kits.

Steering the Private Sector in COVID-19 Diagnostic Test Kit Development in South Korea.

Responsive private sector engagement in developing test kits for coronavirus disease (COVID-19) in South Korea offers a valuable case study in public-private partnership and infectious disease governance. Korean biotech firms promptly developed diagnostic test kits, and the nation achieved capacity to test more than 20,000 people daily. This was a direct result of the continuous application of lessons learned from the Middle Eastern respiratory syndrome outbreak in 2015. South Korea had been strengthening the private sectors' infectious disease governance and response capacity, creating various new constructive pathways toward public-private partnership. Regulatory amendments were made to better liaise with the private sector. Government-led investment had increased in the research and development of testing technologies over the past 5 years. Furthermore, the Korean government had introduced fast-tracking approval, allowing open competition for more than 20 domestic biotech companies to develop test kits. An overview of test kit governance informs us of the importance of public-private partnership for pandemic threats.

Perspective of Covid-19 pandemic in South Asian countries.

COVID-19 is rapidly spreading throughout the world since December 2019. It has hit South Asian countries with faded impact, which can be attributed to (a) availability of kits, (b) number of people tested for COVID-19, (c) immunity, (d) environmental conditions and (e) vaccination.

Strategies for the efficient use of diagnostic resource under constraints: a model-based study on overflow of patients and insufficient diagnostic kits.

This article addresses an optimisation problem of distributing rapid diagnostic kits among patients when the demands far surpass the supplies. This problem has not been given much attention in the field, and therefore, this article aims to provide a preliminary result in this problem domain. First, we describe the problem and define the goal of the optimisation by introducing an evaluation metric that measures the efficiency of the distribution strategies. Then, we propose two simple strategies, and a strategy that incorporates a prediction of patients' visits utilising a standard epidemic model. The strategies were evaluated using the metric, with past statistics in Kitami City, Hokkaido, Japan, and the prediction-based strategy outperformed the other distribution strategies. We discuss the properties of the strategies and the limitations of the proposed approach. Although the problem must be generalised before the actual deployment of the suggested strategy, the preliminary result is promising in its ability to address the shortage of diagnostic capacity currently observed worldwide because of the ongoing coronavirus disease pandemic.

A simple RNA preparation method for SARS-CoV-2 detection by RT-qPCR.

The technique RT-qPCR for viral RNA detection is the current worldwide strategy used for early detection of the novel coronavirus SARS-CoV-2. RNA extraction is a key pre-analytical step in RT-qPCR, often achieved using commercial kits. However, the magnitude of the COVID-19 pandemic is causing disruptions to the global supply chains used by many diagnostic laboratories to procure the commercial kits required for RNA extraction. Shortage in these essential reagents is even more acute in developing countries with no means to produce kits locally. We sought to find an alternative procedure to replace commercial kits using common reagents found in molecular biology laboratories. Here we report a method for RNA extraction that takes about 40 min to complete ten samples, and is not more laborious than current commercial RNA extraction kits. We demonstrate that this method can be used to process nasopharyngeal swab samples and yields RT-qPCR results comparable to those obtained with commercial kits. Most importantly, this procedure can be easily implemented in any molecular diagnostic laboratory. Frequent testing is crucial for individual patient management as well as for public health decision making in this pandemic. Implementation of this method could maintain crucial testing going despite commercial kit shortages.

Risks of emergency use authorizations for medical products during outbreak situations: a COVID-19 case study.

BACKGROUND: The world is facing an unprecedented outbreak affecting all aspects of human lives which is caused by the COVID-19 pandemic. Due to the virus novelty, healthcare systems are challenged by a high rate of patients and the shortage of medical products. To address an increased need for essential medical products, national authorities, worldwide, made various legislative concessions. This has led to essential medical products being produced by automotive, textile and other companies from various industries and approved under the emergency use authorizations or legal concessions of national regulatory bodies. This paper presents a narrative commentary of the available documentation on emergency use authorizations and legal concessions for medical products during COVID-19 pandemic. METHODOLOGY: The basis for narrative commentary includes scientific articles published in Web of Science, Scopus, PubMed and Embase databases, official publications of international organizations: Food and Drug Agency (FDA), World Health Organisation (WHO), World Bank and United Nations (UN), and national regulatory agency reports in native languages (English, German, Bosnian, and Croatian) published from November 1, 2019 to May 1, 2020. This paper focuses on three types of essential medical products: mechanical ventilators, personal protective equipment (PPE) and diagnostic tests. Evidence-informed commentary of available data and potential identified risks of emergency use authorizations and legal concessions is presented. DISCUSSION: It is recognized that now more than ever, raising global awareness and knowledge about the importance of respecting the essential requirements is needed to guarantee the appropriate quality, performance and safety of medical products, especially during outbreak situation, such as the COVID-19 pandemic. Emergency use authorizations for production, import and approval of medical products should be strictly specified and clearly targeted from case to case and should not be general or universal for all medical products, because all of them are associated with different risk level. CONCLUSION: Presented considerations and experiences should be taken as a guide for all possible future outbreak situations to prevent improvised reactions of national regulatory bodies.

Country-level pandemic risk and preparedness classification based on COVID-19 data: A machine learning approach.

In this work we present a three-stage Machine Learning strategy to country-level risk classification based on countries that are reporting COVID-19 information. A K% binning discretisation (K = 25) is used to create four risk groups of countries based on the risk of transmission (coronavirus cases per million population), risk of mortality (coronavirus deaths per million population), and risk of inability to test (coronavirus tests per million population). The four risk groups produced by K% binning are labelled as 'low', 'medium-low', 'medium-high', and 'high'. Coronavirus-related data are then removed and the attributes for prediction of the three types of risk are given as the geopolitical and demographic data describing each country. Thus, the calculation of class label is based on coronavirus data but the input attributes are country-level information regardless of coronavirus data. The three four-class classification problems are then explored and benchmarked through leave-one-country-out cross validation to find the strongest model, producing a Stack of Gradient Boosting and Decision Tree algorithms for risk of transmission, a Stack of Support Vector Machine and Extra Trees for risk of mortality, and a Gradient Boosting algorithm for the risk of inability to test. It is noted that high risk for inability to test is often coupled with low risks for transmission and mortality, therefore the risk of inability to test should be interpreted first, before consideration is given to the predicted transmission and mortality risks. Finally, the approach is applied to more recent risk levels to data from September 2020 and weaker results are noted due to the growth of international collaboration detracting useful knowledge from country-level attributes which suggests that similar machine learning approaches are more useful prior to situations later unfolding.

A blueprint for academic laboratories to produce SARS-CoV-2 quantitative RT-PCR test kits.

Widespread testing for the presence of the novel coronavirus severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in individuals remains vital for controlling the COVID-19 pandemic prior to the advent of an effective treatment. Challenges in testing can be traced to an initial shortage of supplies, expertise, and/or instrumentation necessary to detect the virus by quantitative RT-PCR (RT-qPCR), the most robust, sensitive, and specific assay currently available. Here we show that academic biochemistry and molecular biology laboratories equipped with appropriate expertise and infrastructure can replicate commercially available SARS-CoV-2 RT-qPCR test kits and backfill pipeline shortages. The Georgia Tech COVID-19 Test Kit Support Group, composed of faculty, staff, and trainees across the biotechnology quad at Georgia Institute of Technology, synthesized multiplexed primers and probes and formulated a master mix composed of enzymes and proteins produced in-house. Our in-house kit compares favorably with a commercial product used for diagnostic testing. We also developed an environmental testing protocol to readily monitor surfaces for the presence of SARS-CoV-2. Our blueprint should be readily reproducible by research teams at other institutions, and our protocols may be modified and adapted to enable SARS-CoV-2 detection in more resource-limited settings.

Can We Test Our Way Out of the COVID-19 Pandemic?

Frequent, low-cost, universal testing for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) with quarantine of those with a positive result has been suggested as a strategy to address the coronavirus disease 2019 (COVID-19) pandemic in the United States. Specifically, home or community use of tests that use paper strip detection devices, which may have reduced sensitivity for SARS-CoV-2, has been advocated. There are several potential challenges or problems with this strategy, including the limited availability of such tests, consequences of incorrect test results, difficulties with adherence to testing, and the questionable accuracy of such tests for detection of infectious people. Because of these, we think it is premature to strongly advocate for such a testing strategy, as the adverse consequences may outweigh any benefits. High-quality outcome data demonstrating the efficacy of this testing strategy are needed before widespread implementation.

A situation analysis of the state of supply of in vitro diagnostics in Low-Income Countries.

In vitro diagnostics (IVDs) are medical devices and accessories used to test bodily samples for causative agents of disease. IVDs play a central role in the diagnosis of individuals, in the rationale use of medicines, in burden of disease estimates, as well as in public health surveillance; especially for detection of emerging epidemics, the identification and monitoring of antimicrobial resistance, and the documentation of infection rates in populations. This article examines how the state of (a) product quality, (b) pricing, and (c) development country manufacturing capacity, are affecting the supply of IVDs in Low-Income Countries (LICs). Data informing this work is derived from interviews with representatives of leading stakeholder organisations working in this space, and analysis of secondary literature. The findings of this analysis are that the supply of IVDs in LICs is undermined by (i) significant variation in product quality; (ii) inconsistent market demand from governments; (iii) limited opportunities for pooled procurement; (iv) a lack of transparency and consistency in product pricing; and (v) insufficient competition among producers capable of innovating for populations with limited purchasing power and low-resource settings. The article then examines four strategies for how these challenges can be overcome.