Three-dimensional analysis of palatal morphology and PAS in patients with cleft lip and palate prior to orthodontic treatment.

BACKGROUND: Since many different conclusions of craniofacial anomalies and their relation to the posterior airway space coexist, this comparative clinical study investigated the palatal morphology concerning volumetric size, posterior airway space dimension and the adenoids of patients with and without a cleft before orthodontic treatment. METHODS: Three-dimensional intraoral scans and cephalometric radiographs of n = 38 patients were used for data acquisition. The patients were divided into three groups: unilateral cleft lip and palate (n = 15, 4 female, 11 male; mean age 8.57 ± 1.79 years), bilateral cleft lip and palate (n = 8, 0 female, 8 male; mean age 8.46 ± 1.37 years) and non-cleft control (n = 15, 7 female, 8 male; mean age 9.03 ± 1.02 years). The evaluation included established procedures for measurements of the palatal morphology and posterior airway space. Statistics included Shapiro-Wilk-Test and simple ANOVA (Bonferroni) for the three-dimensional intraoral scans and cephalometric radiographs. The level of significance was set at p < 0.05. RESULTS: The palatal volume and cephalometric analysis showed differences between the three groups. The palatal volume, the superior posterior face height and the depth of the bony nasopharynx of patients with cleft lip and palate were significantly smaller than for non-cleft control patients. The superior posterior face height of bilateral cleft lip and palate patients was significantly smaller than in unilateral cleft lip and palate patients (BCLP: 35.50 ± 2.08 mm; UCLP: 36.04 ± 2.95 mm; p < 0.001). The percentage of the adenoids in relation to the entire nasopharynx and the angle NL/SN were significantly bigger in patients with cleft lip and palate than in the non-cleft control. In particular, the palatal volume was 32.43% smaller in patients with unilateral cleft lip and palate and 48.69% smaller in patients with bilateral cleft lip and palate compared to the non-cleft control. CONCLUSIONS: Skeletal anomalies relate to the dimension of the posterior airway space. There were differences among the subjects with cleft lip and palate and these without a cleft. This study showed that the morphology of the palate and especially transverse deficiency of the maxilla resulting in smaller palatal volume relates to the posterior airway space. Even the adenoids seem to be affected, especially for cleft lip and palate patients.

Optimization of orofacial cleft imaging protocols using device-specific low-dose cone-beam computed tomography.

OBJECTIVE: The aim of this study was to present optimized device-specific low-dose cone-beam computed tomography (CBCT) protocols with sufficient image quality for pre-surgical diagnostics and three-dimensional (3D) modelling of cleft defects. METHODS: Six paediatric skulls were acquired, and an artificial bony cleft was created. A high-resolution CBCT scan acted as a reference standard (Accuitomo 170, Morita, Kyoto, Japan) for comparing eight low-dose protocols of Newtom VGi-evo (QR Verona, Cefla, Verona, Italy), which included Eco and Regular protocols with different field of views (FOVs). Delineation of lamina dura, cementoenamel junction (CEJ), trabecular bone and bony bridge were assessed. A 3D model of the defect was also evaluated. RESULT: The dose area product of low-dose protocols ranged from 31 to 254 mGy*cm2. Despite the dose difference of up to eight times between applied protocols, trabecular bone and CEJ exhibited appropriate image quality in all scans. However, Regular small FOV protocols (5 × 5 and 8 × 5 cm2), for both lamina dura and bony bridge, demonstrated a significant improvement in image quality compared to Eco FOV counterparts. Based on 3D defect analysis, no significant difference existed between low-dose protocols and the reference standard. CONCLUSION: The findings highlight the possibility of achieving a considerable reduction (up to eight times) in the radiation dose using low-dose CBCT protocols while maintaining sufficient image quality for assessing anatomical structures and 3D modelling in cleft cases.

Comparison of craniomaxillofacial morphology in children with unilateral cleft lip and palate treated with/without presurgical nasoalveolar molding - a retrospective study with a mean age of 5 years.

OBJECTIVES: To three-dimensionally assess differences in craniomaxillofacial skeletal development in patients with operated unilateral cleft lip and palate (UCLP) treated with/without presurgical nasoalveolar molding (PNAM) with a mean age of 5 years. MATERIALS AND METHODS: Cone-beam CT radiographs of 30 patients with UCLP who had undergone PNAM and 34 patients with UCLP who did not receive PNAM were analyzed. The data were stored in DICOM file format and were imported into the Dolphin Imaging program for 3D image reconstruction and landmark identification. 33 landmarks, 17 linear and three angular variables representing craniofacial morphology were analyzed and compared by using the Mann-Whitney U tests. RESULTS: The vast majority of linear variables and 3D coordinates of landmark points reflecting craniofacial skeletal symmetry were not significantly different between the two groups. In terms of craniofacial skeletal development, the PNAM group had a significantly smaller anterior nasal spine offset in the midsagittal plane and a greater maxillary length compared to the non-PNAM group. CONCLUSIONS: Evaluations performed in early childhood showed that treatment with/without PNAM in the neonatal period was not a major factor influencing craniomaxillofacial hard tissue development in patients with UCLP; moreover, PNAM treatment showed significant correction of skeletal deviation at the base of the nose. CLINICAL RELEVANCE: Follow-up in early childhood has shown that PNAM treatment administered during the neonatal stage does not impede maxillary development and has benefits in correcting nasal floor deviation. It is a viable option for improving nasal deformity in children with unilateral cleft lip and palate.

Stability between single and segmental maxillary osteotomies in bimaxillary surgery for cleft-associated class III deformity: a CBCT study.

OBJECTIVE: Segmental Le Fort I osteotomy through the cleft is a common strategy to narrow the alveolar cleft in adults. This study compared skeletal stability between single and segmental Le Fort I osteotomies in patients with unilateral cleft lip and palate (UCLP). MATERIALS AND METHODS: This retrospective analysis examined 45 adults with complete UCLP-associated class III deformities who underwent bimaxillary surgery with either single (n = 30) or segmental (n = 15) Le Fort I advancement. Cone beam computed tomography (CBCT) scans of the facial skeleton were acquired before surgery, 1-week postsurgery, and at follow-up. Measures of landmarks from the CBCT images for the two treatment groups were compared for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch). RESULTS: Postsurgery, the downward movement of the maxilla was larger in the segmental group than the single group. At follow-up, the maxilla moved backward in both groups, and upward in the segmental group. The mandible moved forward and upward and rotated upward in both groups. The amount of upward movement and rotation was larger in the segmental group than the single group. CONCLUSIONS: Two years after bimaxillary surgery in patients with UCLP-associated class III deformity, greater relapse was found after segmental Le Fort I osteotomies in vertical translation of the maxilla and mandible, and pitch rotation of the mandible compared with single Le Fort I osteotomies. CLINICAL RELEVANCE: The vertical relapse of the maxilla was larger after segmental Le Fort I advancement compared with single Le Fort I advancement in clefts.

A novel MED12 pathogenic variant in a female fetus with facial cleft and cardiac defects identified in the first trimester.

Trio exome sequencing was performed on a female fetus with an increased nuchal translucency, along with nasal bone hypoplasia, suspected cleft palate and abnormal outflow tract of the heart. A de novo heterozygous variant c.5500_5507del, p.(Tyr1834Argfs × 58) in the MED12 gene was detected. Loss-of-function variants in MED12 in females are associated with Hardikar syndrome (HS). A follow-up ultrasound at 15+5 weeks of gestation identified multiple fetal anomalies including bilateral cleft lip and palate, diaphragmatic hernia, atrioventricular septal defect, persistent truncus arteriosus, and bilateral renal pelvis dilation. Fetal autopsy confirmed the prenatal sonographic findings, and the MED12 variant was discussed by our multidisciplinary team to be the cause of fetal anomalies. Our case is the first prenatal one in which HS was diagnosed due to first trimester structural malformations. This case report presents another example of early identification of a major anomaly which allows earlier genetic diagnosis and more time for clinical management.

Determination of safety margin of nasal septum osteotomy for sphenoid sinus in cleft lip and palate patients.

BACKGROUND: Nasal septum osteotomy is used for separating the nasal septum and maxilla during a Le Fort I osteotomy. If this osteotomy is applied too high or is tilted into the nasal cavity, the sphenoid sinus and various adjacent vital structures may be damaged, and serious bleeding, neurological complications, blindness or even death may occur. The aim of this study is to determine the safety margin of the nasal septum osteotomy for sphenoid sinus during the Le Fort I surgery in cleft lip and palate (CLP) patients. METHODS: Twenty cleft lip and palate (the CLP group) and 20 healthy individuals (the control group) were included in this study. Three values (two lines and an angle) were measured by cone beam computed tomography (CBCT). The first line is the line passing through the junction of the spina nasalis anterior point and the lower point of the perpendicular lamina of the palatine bone. The undersired line is the line passing through the junction of the spina nasalis anterior point and the lower anterior border of the base of the sphenoid sinus. The osteotomy angle is the angle between these two lines. RESULTS: In the control group; a surgical line of 44.11-61.14 mm (mean 51.91 ± 4.32), an undesired line of 52.48-69.58 mm (mean 59.14 ± 5.08) and an angle of 18.22-27.270 (mean 22.66 ± 2.55) were found, while in the CLP group, a surgical line of 34.53-51.16 mm (mean 43.38 ± 4.79), an undesired line of 46.86-61.35 mm (mean 55.02 ± 3.24) and an angle of 17.60-28.810 (mean 22.60 ± 2.81) were found. CONCLUSIONS: Although the angle to the sphenoid sinus was not significantly affected by CLP, careful planning and consideration of these anatomical differences are crucial to prevent complications and ensure the safety of Le Fort I surgery in CLP patients. Further research with larger sample sizes and subgroup analysis of unilateral and bilateral CLP cases is needed to improve our understanding of these anatomical variations and improve surgical approaches to individuals with CLP undergoing orthognathic procedures.

Sirenomelia or mermaid syndrome with a cleft lip in a Tanzanian newborn: a case report.

BACKGROUND: Sirenomelia or sirenomelia sequence, also known as mermaid syndrome, is a rare congenital anomaly involving the caudal region of the body. The syndrome is characterized by partial or complete fusion of lower extremities, renal agenesis, absent urinary tract, ambiguous external genitalia, imperforate anus, and single umbilical artery. Sirenomelia is often associated with several visceral congenital malformations, rendering it invariably incompatible with extrauterine life. CASE PRESENTATION: We present the case of 22-year-old Black African woman who delivered a term newborn by caesarean section at a gestation age of 37 weeks due to obstructed labor with fetal distress. The newborn was a fresh stillbirth weighing 2100 g and had fusion of the lower extremities, a single upper limb, ambiguous genitalia, imperforate anus, and a cleft lip. The mother had made only two prenatal visits, at which she was found to be normotensive and normoglycemic. She was not screened for routine fetomaternal infections and missed supplementation for folic acid during the critical first trimester. She did not undergo any obstetric ultrasonography. The parents of the newborn were not close relatives and there was no family history of consanguinity. Further genetic testing was not performed due to lack of laboratory capacity, and post mortem examination was not permitted due to cultural taboo and restrictions relating to handling of deceased newborns. CONCLUSION: Sirenomelia is a rare congenital malformation with very poor prognosis. Specific interventions during pre-conception and early prenatal care are critical in the prevention of specific congenital anomalies. Early obstetric ultrasonography is invaluable for diagnosis of sirenomelia as well as counseling for possible termination of pregnancy.

Nasolabial anthropometry using 3D computed tomography scan reconstruction: baseline study for nasolabial correction in Indonesian children with cleft lip and palate / Antropometría nasolabial mediante reconstrucción con tomografía computarizada 3D: estudio de referencia para la corrección nasolabial en niños Indonesios con fisura labiopalatina

Background: The normal nasolabial structure of infants and chil-dren from East Asian, specifically Indonesian, descent groups has been less explored in the literature. This anthropometric study is used as a guide in lip repair in patients with clefts. This retrospective study used archived CT images from the Indonesian population. Materials and Methods: Computed tomography records of children under 5 years of age were extracted from a provincial hospital. The images were then filtered based on the inclusion and exclusion criteria and then the 2D slices were reconstructed using the open source software Invesalius. Twenty-five variable nasolabial parameters of the nasolabial structure were then measured in the 3D rendering mode. Images with craniofacial dysmorphism or cannulas that passed over the nasolabial structure were excluded. Results were summarized using descriptive statistics. Results: Fourteen of 128 CT images were included in this study. The samples were divided into two age groups: 0-12 months and 25-54 months. There were moderate to strong, positive correlations between age and all nasolabial variables, which were statistically significant (p<0.05) except for nasal length, nares circumference, columella width, superior philtrum width, philtrum column height, and cutaneous upper lip height. Conclusions: This study described anthropometric measurements of normal nasolabial structures as a reference point for lip correction surgery. However, to obtain more accurate anthropometric guidelines, further studies with larger sample sizes are desirable. Although surgical repair of the lip is usually performed within the first year of life, some cases of surgery are performed after infancy.

Antecedentes: La estructura nasolabial normal de bebés y niños de grupos de ascendencia de Asia oriental, específicamente de Indonesia, ha sido menos explorada en la literatura. Este estudio antropométrico se utiliza como guía en la reparación del labio en pacientes con fisuras. Este estudio retrospectivo utilizó imágenes de tomografía computarizada archivadas de la población indonesia. Materiales y Métodos: Se extrajeron los registros de tomografía computarizada de niños menores de 5 años de un hospital provincial. Luego, las imágenes se filtraron según los criterios de inclusión y exclusión y luego se reconstruyeron los cortes 2D utilizando el software de código abierto Invesalius. Luego se midieron veinticinco parámetros nasolabiales variables de la estructura nasolabial en el modo renderizado 3D. Se excluyeron imágenes con dismórfica craneofacial y cánula que pasa sobre la estructura nasolabial. Los resultados se resumen mediante estadística descriptiva. Resultado: En este estudio se incluyeron catorce de 128 imágenes de TC. Las muestras se dividieron en dos grupos de edad: 0-12 meses y 25-54 meses. Hubo una correlación positiva de moderada a fuerte entre la edad y todas las variables nasolabiales, que fueron estadísticamente significativas (p<0,05) excepto la longitud nasal, la circunferencia de las narinas, el ancho de la columela, el ancho del filtrum superior, la altura de la columna del filtrum y la altura cutánea del labio superior. Conclusión: Este estudio describió las medidas antropométricas de estructuras nasolabiales normales como base para la cirugía de corrección de labios. Sin embargo, para obtener directrices antropométricas más precisas, son deseables más estudios con tamaños de muestra más grandes. Aunque la reparación quirúrgica del labio normalmente se realiza dentro del primer año de vida, en algunos casos la cirugía se realiza después de la infancia.

Correlating Jaw Bone Growth and Nasal Morphology Among Adult Patients With Cleft Lip and Palate: A Retrospective Cephalometric Study.

This retrospective cross-sectional study reviewed adult patients with operated cleft lip and/or palate (CL/P) and normal control, and performed comprehensive craniofacial and nasal morphological analyses based on lateral cephalometric radiographs. Pearson or Spearman correlation coefficient assessed intraclass correlation. Seven hundred fifty-seven operated patients with CL/P, and 165 noncleft normal controls were enrolled. Among the normal and CL/P groups, S-N-A angle registered positive correlations with nasal base prominence (S-N'-Sn, degrees). Upper facial height (N-ANS, mm) had positive correlations with nasal dorsum length (N'-Prn, mm) and nasal bone length (N-Na, mm). Although in patients with bilateral cleft lip and palate, there were moderate negative correlations ( r =-0.541, P <0.05) with soft tissue facial profile angle (FH-N'Pog', degree) and nasolabial angle (Cm-Sn-ULA, degree). Correlation exists between the morphology of jaw bones and external nose among patients with CL/P. Maxillary sagittal insufficiency is associated with concave nasal profile, and maxilla height is associated with nasal length.

Biomechanical behavior of three maxillary expanders in cleft lip and palate: a finite element study.

This study evaluated the stress distribution in the dentoalveolar and palatal bone structures during maxillary expansion in a 17-year-old male patient with bilateral cleft lip and palate (BCLP) using expanders with dental (HYRAX) and skeletal anchorage (MARPE). For the generation of the specific finite element models, cone-beam computed tomography was used, and the DICOM files were exported to Mimics 3-Matic (Materialise) and Patran (MSC Software) software. Three specific three-dimensional models were generated: A) HYRAX: conventional four-banded hyrax screw (9 mm); B) MARPE-DS: 3 miniscrews (1.8 mm diameter - 5.4 mm length) and four-banded dental anchorage; and C) MARPE-NoDS: 3 miniscrews without dental anchorage. Maxillary expansion was simulated by activating the expanders transversely 1 mm on the "X" axis. HYRAX resulted in higher levels of deformation predominantly in the dentoalveolar region. MARPE-DS showed stress in the dentoalveolar region and mainly in the center of the palatal region, at approximately 4,000 µÎµ. MARPE-NoDS exhibited evident stress only in the palatal region. High stress levels in the root anchoring teeth were observed for HYRAX and MARPE-DS. In contrast, MARPE-NoDS cause stress on the tooth structure. The stress distribution from the expanders used in the BLCP showed asymmetric expansive behavior. During the initial activation phase of expansion, the HYRAX and MARPE-DS models produced similarly high strain at the dentoalveolar structures and upper posterior teeth displacement. The MARPE-NoDS model showed restricted strain on the palate.

Prenatal findings in 11 cases with craniofacial microsomia using the Alberta Congenital Anomalies Surveillance System, 1997-2019.

Craniofacial microsomia (CFM) primarily includes specific head and neck anomalies that co-occur more frequently than expected. The anomalies are usually asymmetric and affect craniofacial features; however, there are frequently additional anomalies of variable severity. Published prenatal findings for CFM are limited. This study contributes 11 cases with CFM and their anomalies identified prenatally. Cases born between January 1, 1997 and December 31, 2019 with CFM were abstracted from the Alberta Congenital Anomalies Surveillance System, which is a population-based program ascertaining congenital anomalies for livebirths, stillbirths, and termination of pregnancies for fetal anomalies. There were 11 cases ascertained with prenatal findings including facial anomalies: one each with left cleft lip, right microtia, and bilateral microphthalmia. Two cases had vertebral anomalies. In addition, anomalies of the kidneys, brain, heart, and radial ray were identified. Six (55%) had a single umbilical artery, five (45%) were small for gestational age, and three (27%) were from a twin pregnancy that were discordant for anomalies. Four (36%) overlapped another proposed recurrent constellations of embryonic malformation condition. This study describes prenatal findings for 11 cases with CFM. Comparable to prior published cases, there were recurring anomalies on prenatal imaging, including anomalies of the brain, eye, heart, kidneys, and radial ray, which may aid in the prenatal diagnosis of CFM.

Congenital midline upper lip sinus in an infant.

Congenital lip sinus is a rare entity with upper lip sinus being rarer than the lower lip sinus. It can be an isolated entity or associated with cleft lip, palate or Van der Woude syndrome. Syndromic association requires proper evaluation and aggressive surgical treatment. Preoperative delineation of the sinus tract with ultrasound sonography or MRI is mandatory. Simple excision is sufficient in cases of isolated sinuses. In this article, we report an infant with upper lip sinus managed successfully with simple excision and reviewed the literature.

Adaptable cascaded registration for personalized maxilla completion and cleft defect volume estimation.

BACKGROUND: Cone-beam computed tomography (CBCT) images provide high-resolution insights into the underlying craniofacial anomaly in patients with cleft lip and palate (CLP), requiring non-negligible annotation costs to measure the cleft defect for the guidance of the clinical secondary alveolar bone graft procedures. Considering the cumbersome volumetric image acquisition, there is a lack of paired CLP CBCTs and normal CBCTs for learning-based anatomical structure restoration models. Nowadays, the registration-based method relieves the annotation burden, though one-shot registration and the regular mask are limited to handling fine-grained shape variations and harmony between restored bony tissues and the defected maxilla. PURPOSE: This study aimed to design and evaluate a novel method for deformable partial registration of the CLP CBCTs and normal CBCTs, enabling personalized maxilla completion and cleft defect volume prediction from CLP CBCTs. METHODS: We proposed an adaptable deep registration framework for personalized maxilla completion and cleft defect volume prediction from CLP CBCTs. The key ingredient was a cascaded partial registration to exploit the maxillary morphology prior and attribute transfer. Cascaded registration with coarse-to-fine registration fields handled morphological variations of cleft defects and fine-grained maxillary restoration. We designed an adaptable cleft defect mask and volumetric Boolean operators for reliable voxel filling of the defected maxilla. A total of 36 clinically obtained CLP CBCTs were used to train and validate the proposed model, among which 22 CLP CBCTs were used to generate a training dataset with 440 synthetic CBCTs by B-spline deformation-based data augmentation and the remaining for testing. The proposed model was evaluated on maxilla completion and cleft defect volume prediction from clinically obtained unilateral and bilateral CLP CBCTs. RESULTS: Extensive experiments demonstrated the effectiveness of the adaptable cleft defect mask and the cascaded partial registration on maxilla completion and cleft defect volume prediction. The proposed method achieved state-of-the-art performances with the Dice similarity coefficient of 0.90 ± $\pm$ 0.02 on the restored maxilla and 0.84 ± $\pm$ 0.04 on the estimated cleft defect, respectively. The average Hausdorff distance between the estimated cleft defect and the manually annotated ground truth was 0.30 ± $\pm$ 0.08 mm. The relative volume error of the cleft defect was 0.09 ± $0.09\pm$ 0.08. The proposed model allowed for the prediction of cleft defect maps that were in line with the ground truth in the challenging unilateral and bilateral CLP CBCTs. CONCLUSIONS: The results suggest that the proposed adaptable deep registration model enables patient-specific maxilla completion and automatic annotation of cleft defects, relieving tedious voxel-wise annotation and image acquisition burdens.

Dental and skeletal maturation of Chinese male children with unilateral cleft lip and palate.

The aim of this study was to determine whether the relationship between dental age (DA), cervical stage (CS) and chronological age (CA) in Chinese male children with unilateral cleft lip and palate (UCLP) is similar to that of children without clefts. Panoramic and cephalometric radiographs of 105 male UCLP patients, aged from 8 to 16 years, were collected and compared to 210 age-matched healthy control males. The Demirjian and cervical vertebral maturation (CVM) methods were used to visually examine the radiographs and Spearman's correlation analysis was used to identify differences between the two groups with regards to CS, DA and CA. There was a significant positive correlation between DA and CA in both groups and the mean CA-DA difference was significantly higher in children with UCLP when compared to controls (0.319 vs. 0.003, p < 0.05). A significant delay in tooth development was detected in UCLP children from 10 to 12 years-of-age. Both the UCLP and control groups showed high correlations between CS and DA. Calcification stage D appeared only before CS3; however, from CS5 to 6, all teeth have almost completed their maturation phase. Chinese male UCLP patients are likely to experience delayed tooth development compared to healthy controls, especially during the fast-growing period. Evaluating the stages of tooth mineralization could represent a rapid method to assess growth potential.

3D evaluation of the maxillary sinus volumes in patients with bilateral cleft lip and palate.

One of the most common congenital anomalies of the head and neck region is a cleft lip and palate. This retrospective case-control research aimed to compare the maxillary sinus volumes in individuals with bilateral cleft lip and palate (BCLP) to a non-cleft control group. The study comprised 72 participants, including 36 patients with BCLP and 36 gender and age-matched control subjects. All topographies were obtained utilizing Cone Beam Computed Tomography (CBCT) for diagnostic purposes, and 3D Dolphin software was utilized for sinus segmentation. Volumetric measurements were taken in cubic millimeters. No significant differences were found between the sex and age distributions of both groups. Additionally, there was no statistically significant difference observed between the BCLP group and the control group on the right and left sides (p > 0.05). However, the mean maxillary sinus volumes of BCLP patients (8014.26 ± 2841.03 mm3) were significantly lower than those of the healthy control group (11,085.21 ± 3146.12 mm3) (p < 0.05). The findings of this study suggest that clinicians should be aware of the lower maxillary sinus volumes in BCLP patients when planning surgical interventions. The utilization of CBCT and sinus segmentation allowed for precise measurement of maxillary sinus volumes, contributing to the existing literature on anatomical variations in BCLP patients.

Validation and comparison of 2D grading scales and 3D volumetric measurements for outcome assessment of bone-grafted alveolar clefts in children.

BACKGROUND: Several methods have been proposed to assess outcome of bone-grafted alveolar clefts on cone beam computed tomography (CBCT), but so far these methods have not been compared and clinically validated. OBJECTIVES: To validate and compare methods for outcome assessment of bone-grafted clefts with CBCT and provide recommendations for follow-up. METHODS: In this observational follow-up study, two grading scales (Suomalainen; Liu) and the volumetric bone fill (BF) were used to assess the outcome of 23 autogenous bone-grafted unilateral alveolar clefts. The mean age at bone grafting was 9 years. The volumetric BF was assessed in five vertical sections. The bone-grafted cleft outcome was based on a binary coding (success or regraft) on a clinical multidisciplinary expert consensus meeting. Grading scales and volumetric assessment were compared in relation to the bone-grafted cleft outcome (success or regraft). Reliability for the different outcome variables was analyzed with intra-class correlation and by calculating kappa values. LIMITATIONS: The study had a limited sample size. Clinical CBCT acquisitions had a varying tube current and exposure time. RESULTS: Volumetric 3D measurements allowed for outcome assessment of bone-grafted alveolar clefts with high reliability and validity. The two grading scales showed highly reliable outcomes, yet the validity was high for the Suomalainen grading scale but low for the Liu grading scale. CONCLUSIONS: Volumetric 3D measurement as well as the Suomalainen grading can be recommended for outcome assessment of the bone-grafted cleft. Yet, one must always make a patient-specific assessment if there is a need to regraft.

Developmental characteristics of the permanent upper lateral incisor in unilateral cleft lip and palate.

OBJECTIVES: This study aims to provide insights into the developmental characteristics of the upper lateral incisor in individuals with unilateral clefts. MATERIALS AND METHODS: Panoramic radiographs of a consistent group of Caucasian children taken over time (ages 6, 9, and 12) were extensively reviewed. The study assessed the distribution pattern, eruption path, tooth development, and crown size of the upper lateral incisor within the cleft region. RESULTS: The most commonly observed distribution pattern was the lateral incisor located distal to the cleft, accounting for 49.2% of cases. Furthermore, a significant delay in tooth development of the upper lateral incisor on the cleft side was noted at ages 6 and 9 (p > 0.001). Compared with the non-cleft side, these incisors often erupted along the alveolar cleft and exhibited microdontia (88.3%, p < 0.041). CONCLUSION: Lateral incisors on the cleft side display unique distribution patterns, microdontia, and delayed tooth development. Careful monitoring of the cuspid eruption is essential, as it can influence the eruption of the lateral incisor. CLINICAL RELEVANCE: A comprehensive understanding of the development of the upper lateral incisor relative to the cleft is vital for determining its prognosis over time. The position of the upper lateral incisor can also influence the timing and prognosis of secondary alveolar bone grafting. Preserving the upper lateral incisor favors arch length, perimeter, and symmetry in individuals with unilateral clefts.

Three-dimensional evaluation of secondary alveolar bone grafting in patients with unilateral cleft lip and palate: A 2-3 year post-operative follow-up.

OBJECTIVES: The present study aims to quantitatively assess secondary alveolar bone graft (SABG) resorption in unilateral cleft lip, alveolus and palate (UCLAP) patients in a 2-3 year longitudinal follow-up setting by using a validated 3D protocol. Furthermore, the potential relation of SABG resorption with maxillary canine position and a number of patient-related factors was investigated. METHODS: UCLAP patients who underwent SABG and had good quality CBCT images at the following timepoints were included in the study: pre-operative (T0), immediate (T1), 6 months (T2) and either 1-2 years (T3) or 2-3 years (T4) post-operative. The final bone grafted region was defined on the T1 scans and refined in the registered T0 scans. The bone graft after resorption was determined by applying threshold-based segmentation on the registered T2, T3 or T4 scans within the segmented bone graft volume. The position of the canines was determined at every timepoint at the cleft and non-cleft side. RESULTS: Forty-five UCLAP patients (mean age 9.0 ± 1.3 years) were included. In the first 6 months after SABG, 43.6% bone resorption was recorded. 2-3 years post-operative, 56% bone resorption was found if the maxillary canine was not yet erupted and 42.7% if it erupted through the graft. The vertical position of the canines was significantly higher on the cleft side at T3. CONCLUSIONS: The present study reports significant SABG resorption over time. However, no correlation was found between SABG resorption and canine position, nor between other patient-related factors.

Mandibular condyle volumes are associated with facial asymmetry in patients with cleft lip and palate: A retrospective cohort study.

This study compares condylar volumetric asymmetry and facial asymmetry in patients with cleft lip and/or palate (CLP) and controls. The mandibular condyle is important to facial growth, but its role in facial asymmetry for those with CLP has not been described. Condylar volumes and mandibular asymmetry were retrospectively calculated using Mimics Version 23.0 (Materialise, Leuven, Belgium) from patients with CLP undergoing computed tomography (CT) imaging and a cohort of controls. A total of 101 participants, 60 with CLP and 41 controls, had mean condylar volumetric asymmetry of 16.4 ± 17.4 % (CLP) and 6.0 ± 4.0 % (controls) (p = 0.0002). Patients with CLP who had clinically significant chin deviation (>4 mm) had more asymmetric condyles than those without significant chin deviation (p = 0.003). The chin deviated toward the smaller condyle in patients with facial asymmetry more often than in patients without facial asymmetry (81 % vs. 62 %, p = 0.033). While controls had some degree of condylar asymmetry, it tended to be milder and not associated with facial asymmetry. There is a greater degree of condylar volumetric asymmetry in patients with CLP compared to individuals in the general population. Clinically significant facial asymmetry in CLP is associated with a higher degree of condylar asymmetry, with the facial midline deviating toward the smaller condyle.

Quantitative assessment of cleft volume and evaluation of cleft's impact on adjacent anatomical structures using CBCT imaging.

OBJECTIVES: To determine pre-operative cleft volume and evaluate cleft´s impact on surrounding anatomical structures in children and adolescents with orofacial clefts using cone bean computed tomography (CBCT) imaging. METHODS: The present retrospective study retrieved CBCT examinations of 68 patients from a previous study. The examinations had been exposed either before (n = 53) or after (n = 15) alveolar bone grafting. Pre-operative volume of cleft was determined, and type and location were evaluated. Morphological changes on the adjacent anatomical structures, including the incisive foramen, the nasal septum and floor, and the inferior turbinate, were assessed. RESULTS: Mean bilateral cleft volume was 0.76 cm3, while mean unilateral cleft volume was 1.08 cm3; the difference was significant (p < 0.001). Variation in cleft volume, however, was large. The incisive foramen was not visible in the majority of cases with bilateral clefts (71%); the difference was significant (p = 0.001). In cases with unilateral clefts, the nasal septum in 87% was curved towards the cleft or graft side. Also, the mean size of the widest part of the inferior turbinate was 8.8 mm on the cleft or graft side and 10.4 mm on the non-cleft side. The difference was significant (p < 0.001). CONCLUSIONS: When required, CBCT is a feasible method for quantitatively illustrating alveolar clefts and their impact on the morphological development of surrounding structures. Variation in cleft volume was large.