Impact of Sacroiliac Interosseous Ligament Tension and Laxity on the Biomechanics of the Lumbar Spine: A Finite Element Study.

OBJECTIVE: To investigate the influence of sacroiliac interosseous ligament tension and laxity on the biomechanics of the lumbar spine. METHODS: A static analysis of a three-dimensional finite element model of the Lumbar-Pelvic is conducted to verify the model's effectiveness. Adjusting the sacroiliac ligament's elasticity modulus under a 10Nm lumbar flexion/extension moment, it simulates ligament tension/laxity to calculate vertebrae displacements, intervertebral disc stress and deformation, nucleus pulposus pressure, facet joint force, and ligament stress. RESULTS: With the elastic modulus of the sacroiliac ligament changing by +50%, -50%, and -90%, the angular displacement of vertebra 3 in forward flexion changes by +1.64%, -4.84%, and -42.3%, and the line displacements change by +5.7%, -16.4%, and -144.9%, respectively; and the angular displacements in backward extension change by +0.2%, -0.6%, -5.9% and the line displacements change by +5.5%, -14.3%, and -125.8%. However, the angular displacement and center distance between adjacent vertebrae do not change, leading to no change in the maximum stress of the intervertebral disc and the maximum pressure in the nucleus pulposus. Flexion and extension directly affect the deformation and stress magnitude and distribution in the lumbar spine. CONCLUSIONS: While sacroiliac interosseous ligament laxity and tension have little effect on disc deformation and stress, and nucleus pulposus pressure, they reduce the stability of the lumbar-sacral vertebrae. In a forward flexion state, the lumbar ligaments bear a large load and are prone to laxity, thereby increasing the risk of lumbar injury.

Scaphoid, lunate and capitate kinematics in the normal and ligament deficient wrist: A bi-plane X-ray fluoroscopy study.

The ligamentous structures of the wrist stabilise and constrain the interactions of the carpal bones during active wrist motion; however, the three-dimensional translations and rotations of the scaphoid, lunate and capitate in the normal and ligament deficient wrist during planar and oblique wrist motions remain poorly understood. This study employed a computer-controlled simulator to replicate physiological wrist motion by dynamic muscle force application, while carpal kinematics were simultaneously measured using bi-plane x-ray fluoroscopy. The aim was to quantify carpal kinematics in the native wrist and after sequential sectioning of the scapholunate interosseous ligament (SLIL) and secondary scapholunate ligament structures. Seven fresh-frozen cadaveric wrist specimens were harvested, and cycles of flexion-extension, radial-ulnar deviation and dart-thrower's motion were simulated. The results showed significant rotational and translational changes to these carpal bones in all stages of disruptions to the supporting ligaments (p < 0.05). Specifically, following the disruption of the dorsal SLIL (Stage II), the scaphoid became significantly more flexed, ulnarly deviated, and pronated relative to the radius, whereas the lunate became more extended, supinated and volarly translated (p < 0.05). Sectioning of the dorsal intercarpal (DIC), dorsal radiocarpal (DRC), and scaphotrapeziotrapezoid (STT) ligaments (Stage IV) caused the scaphoid to collapse further into flexion, ulnar deviation, and pronation. These findings highlight the importance of all the ligamentous attachments that relate to the stability of the scapholunate joint, but more importantly, the dorsal SLIL in maintaining scapholunate stability, and the preservation of the attachments of the DIC and DRC ligaments during dorsal surgical approaches. The findings will be useful in diagnosing wrist pathology and in surgical planning.

Characterization of the L4/L5 rat facet capsular ligament macromechanical and microstructural responses to tensile failure loading.

Low back pain is a prevalent condition that affects the global population. The lumbar facet capsular ligament is a source of pain since the collagenous tissue of the ligament is innervated with sensory neurons that deform with the capsule's stretch. Regional differences in the microstructural and macrostructural anatomy of the spinal facets affect its capsule's mechanical behavior. Although there are many studies of the cervical facet in human and rodent models, the lumbar capsular ligament's multiscale behavior is less well-defined. This study characterizes the macroscale and fiber-scale changes of the rat lumbar facet capsule during tensile failure loading. An integrated polarized light imaging setup captured local fiber alignment during 0.08 mm/s distraction of 7 lumbar facets. Force, displacement, strain, and circular variance were measured at several points along the failure curve: the first instance when the local collagen fiber network realigns differentially (anomalous realignment), yield, the first peak in force corresponding to the capsule's first failure, and peak force, defined as ultimate rupture. Those outcomes were compared across events. While each of force, displacement, and average maximum principal strain increased with applied tension, so did the circular variance of the collagen, suggesting that the fibers were becoming more disorganized. From the fiber alignment maps collected at each mechanical event, the number of anomalous realignment events were counted and found to increase dramatically with loading. The increased collagen disorganization and increasing regions of such disorganization in the facet capsule during loading can provide insights about how loading to the ligament afferent nerves may be activated and thereby produce pain.

Additively manufactured polyethylene terephthalate scaffolds for scapholunate interosseous ligament reconstruction.

The regeneration of the ruptured scapholunate interosseous ligament (SLIL) represents a clinical challenge. Here, we propose the use of a Bone-Ligament-Bone (BLB) 3D-printed polyethylene terephthalate (PET) scaffold for achieving mechanical stabilisation of the scaphoid and lunate following SLIL rupture. The BLB scaffold featured two bone compartments bridged by aligned fibres (ligament compartment) mimicking the architecture of the native tissue. The scaffold presented tensile stiffness in the range of 260 ± 38 N/mm and ultimate load of 113 ± 13 N, which would support physiological loading. A finite element analysis (FEA), using inverse finite element analysis (iFEA) for material property identification, showed an adequate fit between simulation and experimental data. The scaffold was then biofunctionalized using two different methods: injected with a Gelatin Methacryloyl solution containing human mesenchymal stem cell spheroids (hMSC) or seeded with tendon-derived stem cells (TDSC) and placed in a bioreactor to undergo cyclic deformation. The first approach demonstrated high cell viability, as cells migrated out of the spheroid and colonised the interstitial space of the scaffold. These cells adopted an elongated morphology suggesting the internal architecture of the scaffold exerted topographical guidance. The second method demonstrated the high resilience of the scaffold to cyclic deformation and the secretion of a fibroblastic related protein was enhanced by the mechanical stimulation. This process promoted the expression of relevant proteins, such as Tenomodulin (TNMD), indicating mechanical stimulation may enhance cell differentiation and be useful prior to surgical implantation. In conclusion, the PET scaffold presented several promising characteristics for the immediate mechanical stabilisation of disassociated scaphoid and lunate and, in the longer-term, the regeneration of the ruptured SLIL.

Ilio-femoral ligament strains during the flexion-abduction-external rotation test: A cadaveric study.

BACKGROUND: Flexion-abduction-external-rotation (FABER) test is one of the most used tests during the clinical assessment of the hip joint. The limited range of motions reached could be due to iliofemoral ligament tightness, but no study has assessed capsular ligament strain during this test. The main objective of this study is to report strains within the iliofemoral ligament during the FABER test using a segmental approach. METHODS: 9 hips were harvested, and all muscles were removed. Hemispherical markers (∅ 2.6 mm) were glued on the lateral and medial borders of both the medial and lateral iliofemoral bands, separating each border into proximal, mid, and distal portions. The lower limb was placed in a FABER test position. A laser scanner allowed to digitize the 3D surface of the capsule. A Kruskal-Wallis test was performed to assess the effect of ligaments, borders, and portions. FINDINGS: The lateral band of the iliofemoral ligament showed greater strains (14.6 ± 11.4%) compared to the medial band (-8.7 ± 14.2%) (p < 0.001). The greatest strains were observed in the distal portion of the lateral border of the lateral band (51.1 ± 21.5%). A decrease in strain was observed in the mid-portion of the medial border of the medial iliofemoral ligament (-27.9 ± 8.9%). INTERPRETATION: The FABER test is used to assess pain at the hip. Our results show that the limited range of motion at the hip during this test might be caused by increased strains in the lateral band. These results demonstrate that a limitation of joint range of motion during the FABER could be due to an excessive tension of the lateral band of the iliofemoral ligament.

Robot and ultrasound assisted needle insertion to the transverse carpal ligament.

BACKGROUND: A potential alternative treatment to surgery for carpal tunnel syndrome is to inject enzymes into the transverse carpal ligament to decrease its stiffness and alleviate pressure off the median nerve. An accurate injection is needed for delivery to achieve the effects of tissue degradation. The purposes of this study were to 1) determine injection sites using 3D reconstructed anatomy, and 2) insert the needle to the middle of the transverse carpal ligament thickness in situ. METHODS: Six fresh-frozen cadaveric hands were used in this study. Five injection sites were determined in the sagittal plane along the center of the transverse carpal ligament thickness ulnar to the thenar muscle attachment using 3D ultrasonographic reconstruction. Each injection was delivered by rigidly fixing a 27-gauge needle to a six degrees of freedom robot arm programmed to insert the needle tip to the intended target. Ultrasound images were taken of the needle after insertion to measure accuracy and precision of the needle placement. FINDINGS: The needle tip was successfully delivered to the middle region of the transverse carpal ligament thickness and visualized using ultrasound imaging. The accuracy and precision of the needle insertion were 0.83 and 0.31 mm, respectively. INTERPRETATION: Methodology was established for robot-assisted needle insertion to the transverse carpal ligament using 3D ultrasonographic reconstructed anatomy. This methodology can be used in the future to deliver enzymatic injections to the transverse carpal ligament as a potential treatment for carpal tunnel syndrome.

Contributions of the ischiofemoral ligament, iliofemoral ligament, and conjoined tendon to hip stability after total hip arthroplasty: A cadaveric study.

An adequate soft tissue balance is important in total hip arthroplasty (THA). This study assessed the contribution of the iliofemoral ligament, ischiofemoral ligament, and conjoined tendon to the range of hip rotation after THA and hip stability in response to axial traction. THA was performed in eight fresh-frozen cadaveric specimens via an anterolateral approach using a navigation system. The ischiofemoral ligament, the medial arm of the iliofemoral ligament, and the conjoined tendon were resected in that order. The ranges of external and internal rotation and the amount of movement of the femoral head in response to axial traction were measured with the hip in 10° of extension, the neutral position, and in 10°, 30°, and 60° of flexion. Resection of the medial arm of the iliofemoral ligament significantly increased the range of external rotation in 10° of extension, the neutral position, and in 10°, 30°, and 60° of flexion. The conjoined tendon was the most important inhibitor of internal rotation from 10° of extension to 30° of flexion. Although each single element had a minor role in stabilizing the hip when axial traction was applied, resection of two or more elements significantly affected joint stability. The iliofemoral ligament and conjoined tendon are the main inhibitors of external rotation and internal rotation, respectively, when THA is performed using an anterior or anterolateral approach. Resection of two or more elements could greatly affect hip stability when axial traction is applied.

Cross-sectional changes of the distal carpal tunnel with simulated carpal bone rotation.

This study simulated the cross-sectional changes in the distal carpal tunnel resulting from inward rotations of the hamate and trapezium. Rotations which decreased the carpal arch width, increased the carpal arch area. For example, simultaneous rotation of 5 degrees around the hamate and trapezium centroids decreased the carpal arch width by 1.69 ± 0.17 mm and increased the carpal arch area by 6.83 ± 0.68 mm2. Although the bone arch area decreased, decompression of the median nerve would likely occur due to the adjacent location of the nerve near the transverse carpal ligament.

Exploration of shear wave elastography measures of the iliotibial band during different tasks in pain-free runners.

OBJECTIVES: To determine whether shear wave velocity (SWV) of the iliotibial band (ITB): i) increases with active and passive static tasks, and a dynamic task, ii) differs between ITB regions, iii) changes after exposure to running. Additionally, it aimed to determine the between-day reliability. DESIGN: Case series & test-retest. SETTING: Human movement unit laboratory. PARTICIPANTS: Fifteen runners. MAIN OUTCOME MEASURES: SWV was measured unilaterally in three regions of the ITB (proximal, middle and distal), during six tasks: rest and contraction (pre- and post-running), modified Ober test, standing, pelvic drop, and weight shift. RESULTS: Compared to rest, SWV was higher during contraction and Ober test in the distal and middle regions, and higher for the middle region in standing and pelvic drop. No differences were found between regions. A tendency of decreased SWV was observed after running. Compared to the start of the dynamic task, SWV was greater at the end of the movement. Reliability was moderate-to-good for the middle region in the standing tasks (ICCs = 0.68 to 0.84). CONCLUSION: SVW of the ITB was higher under passive or active tension. Comparisons between tasks/regions need to be considered in light of the small sample size and poor repeatability of some regions/conditions.

Through-thickness regional variation in the mechanical characteristics of the lumbar facet capsular ligament.

The human lumbar facet capsule, with the facet capsular ligament (FCL) that forms its primary constituent, is a common source of lower back pain. Prior studies on the FCL were limited to in-plane tissue behavior, but due to the presence of two distinct yet mechanically different regions, a novel out-of-plane study was conducted to further characterize the roles of the collagen and elastin regions. An experimental technique, called stretch-and-bend, was developed to study the tension-compression asymmetry of the FCL due to varying collagen fiber density throughout the thickness of the tissue. Each healthy excised cadaveric FCL sample was tested in four conditions depending on primary collagen fiber alignment and regional loading. Our results indicate that the FCL is stiffest when the collagen fibers (1) are aligned in the direction of loading, (2) are in tension, and (3) are stretched - 16% from its off-the-bone, undeformed state. An optimization routine was used to fit a four-parameter anisotropic, hyperplastic model to the experimental data. The average elastin modulus, E, and the average collagen fiber modulus, ξ, were 13.15 ± 3.59 kPa and 18.68 ± 13.71 MPa (95% CI), respectively.

Does the anterolateral ligament protect the anterior cruciate ligament in the most common injury mechanisms? A human knee model study.

BACKGROUND: Anterior cruciate ligament (ACL) reconstruction still has a risk of re-rupture and persisting rotational instability. Thus, extra-articular structures such as the anterolateral ligament (ALL) are increasingly treated. The ALL however prevents the internal rotation of the tibia and it must be doubted that the ALL protects the ACL in other common injury mechanisms which primarily include tibial external rotation. In this study we aimed to evaluate which extra-articular structures support the ACL in excessive tibial internal and external rotation using a knee finite element (FE) model. METHODS: Internal and external rotations of the tibia were applied to an FE model with anatomical ACL, posterior cruciate ligament (PCL), lateral collateral ligament (LCL), medial collateral ligament (MCL) and intact medial and lateral meniscus. Three additional anatomic structures (anterolateral ligament, popliteal tendon and posterior oblique ligament) were added to the FE model separately and then all together. The force histories within all structures were measured and determined for each case. RESULTS: The ACL was the most loaded ligament both in tibial internal and external rotation. The ALL was the main stabilizer of the tibial internal rotation (46%) and prevented the tibial external rotation by only 3%. High forces were only observed in the LCL with tibial external rotation. The ALL reduced the load on the ACL in tibial internal rotation by 21%, in tibial external rotation only by 2%. The POL reduced the load on the ACL by 8%, the PLT by 6% in tibial internal rotation. In tibial external rotation the POL and PLT did not reduce the load on the ACL by more than 1%. CONCLUSION: The ALL protects the ACL in injury mechanisms with tibial internal rotation but not in mechanisms with tibial external rotation. In injury mechanisms with tibial external rotation other structures that support the ACL need to be considered.

The effect of the interosseous ligament and selected antebrachiocarpal ligaments on rotation of the radius during extension of the carpus.

OBJECTIVE: To evaluate the effect of the interosseous ligament and selected antebrachiocarpal ligaments on the internal rotation of the radius relative to the ulna, during carpal extension. STUDY DESIGN: Cadaveric study. SAMPLE POPULATION: Twenty-four cadaveric canine forelimbs. METHODS: Twenty-four forelimbs were disarticulated at the elbow joint and the antebrachia were prepared for testing. The forelimbs were divided to 6 groups, defined by the order in which ligaments were transected. All specimens were tested intact and after transecting each of the ligaments with the order defined by the group. Rotation of the radius relative to the ulna, caused by extension of the carpus, was measured using a sensor connected to the radius. RESULTS: The mean(±sd) maximum internal rotation of the radius (5.94° ± (1.23°)) with all the ligaments intact was significantly greater (p < 0.012) than the mean(±sd) maximum internal rotation of the radius (3.13° (± 1.13°)) after transecting the interosseus ligament. Transecting the interosseous ligament subsequent to one of the other ligaments caused a decrease in internal radial rotation (p = 0.629), while, transecting the short radial collateral ligament caused an increase in radial rotation (p = 0.629). Transecting the palmar radiocarpal and ulnocarpal ligaments had no effect on radial rotation. CONCLUSION: The interosseous ligament was stretched with internal rotation of the radius due to carpal extension. Carpal flexion resulted in external rotation of the radius. This effect was lost when the interosseus ligament was transected. CLINICAL SIGNIFICANCE: Rotation of the radius is associated with carpal extension, and is likely an intrinsic part of forelimb biomechanics.

The glenohumeral ligaments: Superior, middle, and inferior: Anatomy, biomechanics, injury, and diagnosis.

The three glenohumeral ligaments (superior, middle, and inferior) are discrete thickenings of the glenohumeral joint capsule and are critical to shoulder stability and function. Injuries to this area are a cause of significant musculoskeletal morbidity. A literature search was performed by a review of PubMed, Google Scholar, and OVID for all relevant articles published up until 2020. This study highlights the anatomy, biomechanical function, and injury patterns of the glenohumeral ligaments, which may be relevant to clinical presentation and diagnosis. A detailed understanding of the normal anatomy and biomechanics is a necessary prerequisite to understanding the injury patterns and clinical presentations of disorders involving the glenohumeral ligaments of the shoulder.

Reliability of measurements assessing the Lisfranc joint using weightbearing computed tomography imaging.

INTRODUCTION: Subtle Lisfranc joint injuries remain challenging to diagnose in clinical practice. Although of questionable accuracy, bilateral weightbearing radiographs are considered the current gold standard to assess these injuries. However, weightbearing computed tomography (WBCT), which provides clearer visualization of bony landmarks, can also be used for evaluation. This study aims to design a protocol that reliably measures the distance between the medial cuneiform (C1) and second metatarsal (M2) to assess the Lisfranc joint using WBCT imaging. METHODS: Two unique methods of measuring the C1-M2 distance were designed that localize the center of the interosseous Lisfranc ligament (ILL, reference point). This reference point was located by (I) measuring a specific distance at the M2 base, or (II) approximating from nearby bony landmarks, on both axial (Ax) and coronal (Cor) WBCT images. Four parameters (I-Ax, I-Cor, II-Ax, and II-Cor) were evaluated for each of 96 specimens. Measurements were recorded by three independent observers and repeated for inter- and intra-observer agreement. RESULTS: In total, 96 patient image series were included and assessed in our study with an average age of 46 (19-66, SD 16.1) and average BMI of 25.8 (17.8-30.5, SD 4.3). I-Ax showed excellent agreement for intra-observer evaluation (R = 0.802) and good agreement for inter-observer evaluation (R = 0.727). I-Cor demonstrated excellent inter- (R = 0.814) and intra-observer (R = 0.840) agreement. Good agreement was found for both II-Ax and II-Cor for both intra- (R = 0.730, R = 0.708) and inter-observer (R = 0.705, R = 0.645) evaluation. CONCLUSION: Measuring the C1-M2 joint space with coronal WBCT imaging through a protocol that localizes the ILL is reproducible, simple, and can potentially be utilized clinically to evaluate the Lisfranc joint.

Neuromuscular Control of Ankle-stabilizing Muscles-specific Effects of Sex and Menstrual Cycle.

The purpose of this study was to examine the differences in neuromuscular control and mechanical properties of the ankle-stabilizing muscles between men and women, and during different phases of menstrual cycle in women. Fifteen women with regular menstrual cycles and 17 male counterparts were included in this study. Electromyographic signals were recorded from the peroneus longus (PL) and tibialis anterior (TA) muscles while performing three balance tasks. Muscle tone, stiffness, and elasticity of muscles were measured using a MyotonPRO in the resting position. Outcomes were measured twice (ovulation and early follicular phases) for women, while measurements were acquired only once for men. Significantly higher tibialis anterior-peroneus longus co-contraction (TA/PL ratio) was observed in all balance tasks in women than in men (p< 0.05); however, significant differences between phases of the menstrual cycle were noted only in the 2 most difficult tasks (p< 0.05). A similar pattern was observed in the postural sway. These results highlight the importance of sex-specific hormonal effects on neuromuscular control and mechanical properties, and as well as the differences during phases of the menstrual cycle. These insights assume significance in the context of developing neuromuscular strategies for the purpose of preventing lower extremity injuries during sports activities.

Morphometric analysis of the intercarpal ligaments of the equine proximal carpal bones during simulated flexion and extension of cadaver limbs.

Despite many reported cases of carpal lameness associated with intercarpal ligament injuries in horses, the morphometry, movement pattern and general intrinsic biomechanics of the carpus are largely unknown. Using osteoligamentous preparation of the carpus prepared from 14 equine cadaver forelimbs (aged 9.62 ± 4.25 years), locomotory simulations of flexion and extension movements of the carpal joint were carried out to observed carpal biomechanics and, thereafter, the limbs were further dissected to obtain morphometric measurements of the medial and lateral collateral ligaments (MLC and LCL); medial and lateral palmar intercarpal ligaments (MPICL and LPICL); intercarpal ligaments between radial (Cr) and intermediate (Ci) carpal bones (Cr-Ci ICL); and intercarpal ligaments between Ci and ulnar (Cu) carpal bones (Ci-Cu ICL). The Cr, Ci, Cu and Ca are held together by a series of intercarpal ligaments and move in unison lateropalmarly during flexion, and mediodorsally during extension with a distinguishable proximo-distal sliding movement (gliding) of Cr and Ci against each other during movement. The mean length of MCL (108.82 ± 9.64 mm) was significantly longer (p = 0.042) than LCL (104.43 ± 7.65 mm). The Cr-Ci ICL has a dorsopalmar depth of 37.58 ± 4.14 mm and a midpoint width of 12.05 ± 3.09 mm and its fibres ran diagonally from the medial side of the Ci in a proximo-palmar disto-dorsal direction (i.e. palmarodistally) to the lateral side of the Cr. The specialized movement of the Cr-Ci ICL, which appeared to be further facilitated by a longer MCL suggest a biomechanical function by which carpal damage may be minimized in the equine carpus.

The Effect of Knee Flexion on Length Changes and Stress Distribution of Ligaments: A Displacement Controlled Finite Element Analysis.

The use of dynamic finite element analysis to investigate the biomechanical behavior of the knee joint is mainly based on movement of the joint. Challenges are associated with simulation of knee joint flexion-extension activity. This study investigated changes in the length and stress state of ligaments during lunge with a displacement controlled finite element analysis of the knee joint based on in vivo fluoroscopic kinematic data. The geometric center axis (GCA) was used to represent knee kinematics to quantify femoral motion relative to the tibia. Because the GCA was considered as a functional flexion axis, 2 degrees of freedom could be reduced. Published data on the in vivo fluoroscopic kinematic features of the GCA were used to establish the equations for degrees of freedom. Data for 4 degrees of freedom were obtained simultaneously at every 5° of knee flexion. Displacement and rotation were applied to the femur and tibia to produce relative displacement, and the elongation and stress state of the knee ligaments were computed. The predictions confirmed that lunge affected the biomechanical behavior of ligaments. Displacement controlled finite element analysis of knee flexion can be simulated on the basis of fluoroscopic kinematic data to achieve physiologic movement. [Orthopedics. 2021;44(1):e61-e67.].

The Anterolateral Ligament of the Knee.

The femoral attachment of the anterolateral ligament (ALL) of the knee is still under debate, but the tibial attachment is consistently between Gerdy's tubercle and the fibular head. The structure is less identifiable and more variable in younger patients. The ALL likely plays a role in rotational stability, but its impact on anterior stability is less clear. Numerous ALL reconstruction techniques have been described. Biomechanical analysis of these techniques has not shown clear benefits, but this literature is limited by the heterogeneity of techniques, graft choices, and study methodology. Clinical studies of combined anterior cruciate ligament (ACL) and ALL reconstruction are few but promising in lowering the risk of an ACL reinjury. To our knowledge, there are no studies showing the clinical outcomes of combined ACL and ALL reconstruction in pediatric patients, who are at higher risk for ACL graft failure than adults.

Modification of intra-carpal tunnel pressure after Z-lengthening of the transverse carpal ligament.

Background Flexor retinaculum reconstruction techniques or simply Flexor Retinaculum Z-lengthening have been proposed to preserve Flexor Retinaculum continuity after carpal tunnel release. Their effectiveness is based solely on symptom relief. There has been no analysis of the effects on intra-carpal tunnel pressure of Flexor Retinaculum-lengthening techniques. Objective was to compare intra-carpal tunnel pressure outcomes between complete division and Z-lengthening of the Retinaculum in a cadaveric model of carpal tunnel release. Methods Experimental study of carpal tunnel pressure after surgical Flexor Retinaculum modification in 10 fresh-frozen forearm and hand cadaveric specimens. The Kyphon™ Balloon Kyphoplasty system was used to measure the pressure before and after infusing 1, 2, 3, 4 and 5 ml of saline solution when untreated (Flexor Retinaculum continuity stage I), when Z-lengthened (Flexor Retinaculum continuity stage II), and after complete Flexor Retinaculum division (Flexor Retinaculum continuity stage III). Finding Intra-carpal tunnel pressure increased with larger volume of infused saline solution, although mean pressures were lower after Z lengthening or complete division of the Retinaculum than at baseline. Analysis of linear regression coefficients indicated significant differences as a function of FR continuity stage (F(2,18) = 18.38, p < 0.001), while the Bonferroni test revealed significant differences in slopes between stages I and III (p = 0.003), between stages I and II (p < 0.02), but not between stages II and III (p > 0.05). Interpretation The effectiveness of carpal tunnel release and the reduction in intra-carpal tunnel pressures obtained by Z-lengthening of the FR were similar to those observed after its complete division, while preserving FR continuity.