Lignin/Surfactin Coacervate as an Eco-Friendly Pesticide Carrier and Antifungal Agent against Phytopathogen.

Excessive usage of biologically toxic fungicides and their matrix materials poses a serious threat to public health. Leveraging fungicide carriers with inherent pathogen inhibition properties is highly promising for enhancing fungicide efficacy and reducing required dosage. Herein, a series of coacervates have been crafted with lignin and surfactin, both of which are naturally derived and demonstrate substantial antifungal properties. This hierarchically assembled carrier not only effectively loads fungicides with a maximum encapsulation efficiency of 95% but also stably deposits on hydrophobic leaves for high-speed impacting droplets. Intriguingly, these coacervates exhibit broad spectrum fungicidal activity against eight ubiquitous phytopathogens and even act as a standalone biofungicide to replace fungicides. This performance can significantly reduce the fungicide usage and be further strengthened by an encapsulated fungicide. The inhibition rate reaches 87.0% when 0.30 mM pyraclostrobin (Pyr) is encapsulated within this coacervate, comparable to the effectiveness of 0.80 mM Pyr alone. Additionally, the preventive effects against tomato gray mold reached 53%, significantly surpassing those of commercial adjuvants. Thus, it demonstrates that utilizing biosurfactants and biomass with intrinsic antifungal activity to fabricate fully biobased coacervates can synergistically combine the functions of a fungicide carrier and antifungal agent against phytopathogens and guarantee environmental friendliness. This pioneering approach provides deeper insights into synergistically enhancing the effectiveness of agrochemicals from multiple aspects, including fungicide encapsulation, cooperative antifungal action, and droplet deposition.

Exploring the Effects of Lignin Nanoparticles in Different Zebrafish Inflammatory Models.

Purpose: Lignin is the most abundant source of aromatic biopolymers and has gained interest in industrial and biomedical applications due to the reported biocompatibility and defense provided against bacterial and fungal pathogens, besides antioxidant and UV-blocking properties. Especially in the form of nanoparticles (NPs), lignin may display also antioxidant and anti-inflammatory activities. Methods: To evaluate these characteristics, sonochemically nano-formulated pristine lignin (LigNPs) and enzymatically-phenolated one (PheLigNPs) were used to expose zebrafish embryos, without chorion, at different concentrations. Furthermore, two different zebrafish inflammation models were generated, by injecting Pseudomonas aeruginosa lipopolysaccharide (LPS) and by provoking a wound injury in the embryo caudal fin. The inflammatory process was investigated in both models by qPCR, analyzing the level of genes as il8, il6, il1ß, tnfα, nfkbiaa, nfk2, and ccl34a.4, and by the evaluation of neutrophils recruitment, taking advantage of the Sudan Black staining, in the presence or not of LigNPs and PheLigNPs. Finally, the Wnt/ß-catenin pathway, related to tissue regeneration, was investigated at the molecular level in embryos wounded and exposed to NPs. Results: The data obtained demonstrated that the lignin-based NPs showed the capacity to induce a positive response during an inflammatory event, increasing the recruitment of cytokines to accelerate their chemotactic function. Moreover, the LigNPs and PheLigNPs have a role in the resolution of wounds, favoring the regeneration process. Conclusion: In this paper, we used zebrafish embryos within 5 days post fertilization (hpf). Despite being an early-stage exemplary, the zebrafish embryos have proven their potential as predicting models. Further long-term experiments in adults will be needed to explore completely the biomedical capabilities of lignin NPs. The results underlined the safety of both NPs tested paved the way for further evaluations to exploit the anti-inflammatory and pro-healing properties of the lignin nanoparticles examined.

Phosphorylated and carbamylated Kraft lignin for improving fire- and biological-resistance of Scots pine wood.

In this study, Kraft lignin was modified by ammonium dihydrogen phosphate (ADP) and urea for achieving phosphorylation and carbamylation, aiming to protect wood against biological and fire attack. Scots pine (Pinus sylvestris L.) sapwood was impregnated with a water solution containing Kraft lignin, ADP, and urea, followed by heat treatment at 150 °C, resulting in changes in the properties of the Kraft lignin as well as the wood matrix. Infrared spectroscopy, 13C cross-polarisation magic-angle-spinning (MAS) nuclear magnetic resonance (NMR), and direct excitation single-pulse 31P MAS NMR analyses suggested the grafting reaction of phosphate and carbamylate groups onto the hydroxyl groups of Kraft lignin. Scanning electron microscopy with energy dispersive X-ray spectroscopy indicated that the condensed Kraft lignin filled the lumen as well as partially penetrating the wood cell wall. The modified Kraft lignin imparted fire-retardancy and increased char residue to the wood at elevated temperature, as confirmed by limiting oxygen index, microscale combustion calorimetry, and thermogravimetric analysis. The modified wood exhibited superior resistance against mold and decay fungi attack under laboratory conditions. The modified wood had a similar modulus of elasticity to the unmodified wood, while experiencing a reduction in the modulus of rupture.

Anti-SARS-CoV-2 activity of microwave solvolysis lignin from woody biomass.

The global pandemic caused by the novel coronavirus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has had profoundly detrimental effects on our society. To combat this highly pathogenic virus, we turned our attention to an abundant renewable natural aromatic polymer found in wood. Through a chemical modification of Eucalyptus and Japanese cedar wood via acidic microwave solvolysis in equivolume mixture of 2 % (w/w) aqueous H2SO4, ethylene glycol, and toluene at 190 °C. Subsequently, we separated the resulting solvolysis products through extractions with toluene, ethyl acetate, and ethanol. Among these products, the ethyl acetate extract from Eucalyptus wood (eEAE) demonstrated the highest inhibition effects against the novel SARS-CoV-2. We further divided eEAE into four fractions, and a hexane extract from the ethanol-soluble portion, termed eEAE3, exhibited the most substantial inhibitory rate at 93.0 % when tested at a concentration of 0.5 mg/mL. Analyzing eEAE3 using pyrolysis gas chromatography-mass spectrometry revealed that its primary components are derived from lignin. Additionally, 1H-13C edited-heteronuclear single quantum coherence nuclear magnetic resonance analysis showed that the solvolysis process cleaved major lignin interunit linkages. Considering the abundance and renewability of lignin, the lignin-derived anti-SARS-CoV-2 agent presents a promising potential for application in suppressing infections within our everyday environment.

Eco-friendly lignin nanoparticles as antioxidant and antimicrobial material for enhanced textile production.

Natural polymers are bioactive compounds that are used in the treatment of several disorders. Natural lignin, an amorphous polymer, offers significant potential for use as a building block in the production of bio-renovation materials. This study used an alkaline solvent technique to extract lignin from two Egyptian cotton cultivar byproducts, Giza 86 and 90. We then created nano-lignin to recycle cotton stalks into an environmentally beneficial product. The characterization of L86, L90, LNP86, and LNP90 was carried out using particle size, zeta potential, FT-IR, and TEM. Antioxidant activity using the DPPH assay and antimicrobial activity were determined for lignin and nano-lignin. Seven pathogenic bacteria (Bacillus cereus, Staphylococcus aureus, Staphylococcus sciuri, Salmonella typhi, Salmonella enterica, Escherichia coli, and Pseudomonas aeruginosa) and five mycotoxigenic fungi (Aspergillus flavus, Aspergillus ochraceus, Aspergillus niger, Fusarium proliferatum and Penicillium verrucosum) were used for antimicrobial activity. The results showed high antioxidant efficiency for LNP90, with an IC50 of 10.38 µg/mL. The antimicrobial activity showed positive growth inhibition for all studied microorganisms, with significant differences in nano-lignin compared to ordinary lignin. lignin and nano-lignin were effectively applied to treated textiles for medical purposes. The study concluded that single-use medical textiles with anti-microbial and anti-oxidant properties, made from lignin and nano-lignin, could benefit patients intolerant to antibiotics.

Effects of a Hydrolyzed Lignin Derivative on Bleomycin-Induced Pulmonary Fibrosis in Mice.

Female C57BL/J mice with pulmonary fibrosis induced by injections of bleomycin (20 mg/kg intraperitoneally, 8 times for 4 weeks) were treated with a lignin derivative-based composition BP-C3 (80 mg/kg, daily intragastric administrations for 4 weeks). Bleomycin treatment increased the severity of pulmonary fibrosis (Ashcroft score increased from 1.43±0.20 to 4.17±0.48) and the percentage of α-SMA+ tissue (from 15.22±1.01 to 33.12±2.30%) and DNA-synthetizing nuclei (from 1.05±0.14 to 3.38±0.375). After treatment with BP-C3, we observed a tendency to a decrease in Ashcroft score (to 3.40±0.51) and a significant decrease in the percentage of α-SMA+ tissue to 24.30±1.70%; the percentage of DNA-synthetizing nuclei decreased to a lesser extent (to 3.03±0.22%). These results suggest that BP-C3 has a moderate antifibrotic activity.

Preparation of Vitamin-g-Lignin Nanohybrids with Excellent Biological Activity and Fluorescence Performance.

As a natural renewable biomacromolecule, lignin has some inherently interesting properties such as fluorescence, antioxidation, and antibacterial performance. However, the unsatisfactory fluorescence and biological activities have greatly limited their value-added and large-scale applications. In this work, lignin nanoparticles (LNPs) grafted with vitamin B1 hybrid nanoparticles (LEVs) were obtained by using ethylenediamine and different contents of vitamin B1 through a simple hydrothermal method. The chemical structure, fluorescence properties, and bioactivity were characterized to assess the effects of ethylenediamine and vitamin B1 on the properties of LEVs. It was found that the fluorescence performance of synthesized LEV particles was improved with the increase in the amount of vitamin B1. The free radical scavenging rate (RSA, %) increased to 97.8%, while the antibacterial rates reached up to 99.9%. The antibacterial activity of LEV involved multiple combined mechanisms. The introduction of imine, amide groups, and positively charged VB1 of LEV will make it easier to interact with the negatively charged bacterial phospholipid membranes and cause bacterial lysis and death. Then, the PVA/LEV hydrogel composites were prepared by the freezing-thawing method, and the results showed that PVA/LEV hydrogels had more comprehensive performance such as improved mechanical properties and antioxidant and antibacterial activities, resulting in its great potential to be used as an efficient biomedical material.

Lignin-Based Antioxidant Hydrogel Patch for the Management of Atopic Dermatitis by Mitigating Oxidative Stress in the Skin.

Atopic dermatitis (AD), a chronic skin condition characterized by itching, redness, and inflammation, is closely associated with heightened levels of endogenous reactive oxygen species (ROS) in the skin. ROS can contribute to the onset and progression of AD through oxidative stress, which leads to the release of proinflammatory cytokines, T-cell differentiation, and the exacerbation of skin symptoms. In this study, we aim to develop a therapeutic antioxidant hydrogel patch for the potential treatment of AD using lignin, a biomass waste material. Lignin contains polyphenol groups that enable it to scavenge ROS and exhibit antioxidant properties. The lignin hydrogel patches, possessing optimized mechanical properties through the control of the lignin and cross-linker ratio, demonstrated high ROS-scavenging capabilities. Furthermore, the lignin hydrogel demonstrated excellent biocompatibility with the skin, exhibiting beneficial properties in protecting human keratinocytes under high oxidative conditions. When applied to an AD mouse model, the hydrogel patch effectively reduced epidermal thickness in inflamed regions, decreased mast cell infiltration, and regulated inflammatory cytokine levels. These findings collectively suggest that lignin serves as a therapeutic hydrogel patch for managing AD by modulating oxidative stress through its ROS-scavenging ability.

Natural lignin nanoparticles target tumor by saturating the phagocytic capacity of Kupffer cells in the liver.

Ligand-receptor recognition serves as the fundamental driving force for active targeting, yet it is still constrained by off-target effects. Herein, we demonstrate that circumventing or blocking the mononuclear phagocyte system (MPS) are both viable strategies to address off-target effects. Naturally derived lignin nanoparticles (LNPs) show great potential to block MPS due to its good stability, low toxicity, and degradability. We further demonstrate the impact of LNPs dosage on in vivo tumor targeting and antitumor efficacy. Our results show that a high dose of LNPs (300 mg/kg) leads to significant accumulation at the tumor site for a duration of 14 days after intravenous administration. In contrast, the low-dose counterparts (e.g., 50, 150 mg/kg) result in almost all LNPs accumulating in the liver. This discovery indicates that the liver is the primary site of LNP capture, leaving only the surplus LNPs the chance to reach the tumor. In addition, although cell membrane-engineered LNPs can rapidly penetrate tumors, they are still prone to capture by the liver during subsequent circulation in the bloodstream. Excitingly, comparable therapeutic efficacy is obtained for the above two strategies. Our findings may offer valuable insights into the targeted delivery of drugs for disease treatment.

Synthesis of high-performance antibacterial agent based on incorporated vancomycin into MOF-modified lignin nanocomposites.

The alarming rise in antibiotic resistance necessitates urgent action, particularly against the backdrop of resistant bacteria evolving to render conventional antibiotics less effective, leading to an increase in morbidity, mortality, and healthcare costs. Vancomycin-loaded Metal-Organic Framework (MOF) nanocomposites have emerged as a promising strategy in enhancing the eradication of pathogenic bacteria. This study introduces lignin as a novel synergistic agent in Vancomycin-loaded MOF (Lig-Van-MOF), which substantially enhances the antibacterial activity against drug-resistant bacteria. Lig-Van-MOF exhibits six-fold lower minimum inhibitory concentration (MICs) than free vancomycin and Van-MOF with a much higher antibacterial potential against sensitive and resistant strains of Staphylococcus aureus and Escherichia coli. Remarkably, it reduces biofilms of these strains by over 85 % in minimal biofilm inhibitory concentration (MBIC). Utilization of lignin to modify surface properties of MOFs improves their adhesion to bacterial membranes and boosts the local concentration of Reactive Oxygen Species (ROS) via unique synergistic mechanism. Additionally, lignin induces substantial cell deformation in treated bacterial cells. It confirms the superior bactericidal properties of Lig-Van-MOF against Staphylococcus species, underlining its significant potential as a bionanomaterial designed to combat antibiotic resistance effectively. This research paves the way for novel antibacterial platforms that optimize cost-efficiency and broaden microbial resistance management applications.

Fabricating active Egg Albumin/Sodium Alginate/Sodium Lignosulfonate Nanoparticles film with significantly improved multifunctional characteristics for food packing.

In food packaging, sodium lignosulfonate nanoparticles (SLS NPs) showed significant antibacterial properties, antioxidant and UV barrier activities. Herein, the SLS NPs were synthesized via a sustainable green method and were added into egg albumin/sodium alginate mixture (EA/SA) to fabricate a safe, edible EA/SA/SNPs food packaging. A composite film EA/SA/SNP was examined microstructurally and physicochemically. The mechanical characteristics, UV protection, water resistance, and the composite film's thermal stability were all enhanced by the inclusion of SLS NPs, and water vapor permeability reduced by 44 %. This composite film exhibited robust antioxidative properties with DPPH and ABTS free radical scavenging rates reaching 76.84 % and 92.56 %, and effective antimicrobial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with antibacterial rates reaching 98.25 % and 97.13 % for the positively charged nanoparticles interacting with the cell membrane. Freshness tests showed that the EA/SA/SNPs packaging film could delay the quality deterioration of fresh tomatoes. This composite film can slow down spoilage bacteria proliferation and prolongs food's preservation period by eight days at ambient temperature.

Highly Cytocompatible Polylactic Acid Based Electrospun Microfibers Loaded with Silver Nanoparticles Generated onto Chestnut Shell Lignin for Targeted Antibacterial Activity and Antioxidant Action.

Electrospun (e-spun) fibers are generally regarded as powerful tools for cell growth in tissue regeneration applications, and the possibility of imparting functional properties to these materials represents an increasingly pursued goal. We report herein the preparation of hybrid materials in which an e-spun d,l-polylactic acid matrix, to which chitosan or crystalline nanocellulose was added to improve hydrophilicity, was loaded with different amounts of silver(0) nanoparticles (AgNP) generated onto chestnut shell lignin (CSL) (AgNP@CSL). A solvent-free mechanochemical method was used for efficient (85% of the theoretical value by XRD analysis) Ag(0) production from the reduction of AgNO3 by lignin. For comparison, e-spun fibers containing CSL alone were also prepared. SEM and TEM analyses confirmed the presence of AgNP@CSL (average size 30 nm) on the fibers. Different chemical assays indicated that the AgNP@CSL containing fibers exhibited marked antioxidant properties (EC50 1.6 ± 0.1 mg/mL, DPPH assay), although they were halved with respect to those of the CSL containing fibers, as expected because of the efficient silver ion reduction. All the fibers showed high cytocompatibility toward human mesenchymal stem cells (hMSCs) representative of the self-healing process, and their antibacterial properties were tested against the pathogens Escherichia coli (E. coli), Staphylococcus epidermidis, and Pseudomonas aeruginosa. Finally, competitive surface colonization as simulated by cocultures of hMSC and E. coli showed that AgNP@CSL loaded fibers offered the cells a targeted protection from infection, thus well balancing cytocompatibility and antibacterial properties.

Extraction and Biological Activity of Lignanoids from Magnolia officinalis Rehder & E.H.Wilson Residual Waste Biomass Using Deep Eutectic Solvents.

Lignanoids are an active ingredient exerting powerful antioxidant and anti-inflammatory effects in the treatment of many diseases. In order to improve the efficiency of the resource utilization of traditional Chinese medicine waste, Magnolia officinalis Rehder & E.H.Wilson residue (MOR) waste biomass was used as raw material in this study, and a series of deep eutectic solvents (ChUre, ChAce, ChPro, ChCit, ChOxa, ChMal, ChLac, ChLev, ChGly and ChEG) were selected to evaluate the extraction efficiency of lignanoids from MORs. The results showed that the best conditions for lignanoid extraction were a liquid-solid ratio of 40.50 mL/g, an HBD-HBA ratio of 2.06, a water percentage of 29.3%, an extract temperature of 337.65 K, and a time of 107 min. Under these conditions, the maximum lignanoid amount was 39.18 mg/g. In addition, the kinetics of the extraction process were investigated by mathematic modeling. In our antioxidant activity study, high antioxidant activity of the lignanoid extract was shown in scavenging four different types of free radicals (DPPH, ·OH, ABTS, and superoxide anions). At a concentration of 3 mg/mL, the total antioxidant capacity of the lignanoid extract was 1.795 U/mL, which was equal to 0.12 mg/mL of Vc solution. Furthermore, the antibacterial activity study found that the lignanoid extract exhibited good antibacterial effects against six tested pathogens. Among them, Staphylococcus aureus exerted the strongest antibacterial activity. Eventually, the correlation of the lignanoid extract with the biological activity and physicochemical properties of DESs is described using a heatmap, along with the evaluation of the in vitro hypoglycemic, in vitro hypolipidemic, immunomodulatory, and anti-inflammatory activity of the lignanoid extract. These findings can provide a theoretical foundation for the extraction of high-value components from waste biomass by deep eutectic solvents, as well as highlighting its specific significance in natural product development and utilization.

Preparation of high antioxidant nanolignin and its application in cosmetics.

Lignin, as a natural polyphenol, displays anti-oxidant activity by trapping and binding free radicals through its free phenolic hydroxyl groups. However, the most accessible form, industrial lignins, generally has low phenolic hydroxyl content, which severely limits their application value and scenarios. Herein, we showed that potassium-glycerate deep eutectic solvent (PG-DES) treatment can be combined with laccase oxidation to afford prepared high antioxidant lignin nanoparticles (HA-LNPs) with notably improved anti-oxidant activities benefiting from both the enhanced phenolic hydroxyl content 170.8 % and reduced average particle size (59.0 nm). At concentrations as low as 60 µg/mL, HA-LNPs showed favorable effects in promoting collagen formation. When HA-LNPs were used as an active ingredient in the anti-aging mask formulation, the reactive oxygen species (ROS) scavenging activity of mask samples containing 0.4 % HA-LNPs reached 37.2 %. The data suggest great promise of HA-LNPs as a natural antioxidant for formulating in anti-aging skin care products.

Recent advance in preparation of lignin nanoparticles and their medical applications: A review.

BACKGROUND: Lignin has attracted a lot of attention because it is non-toxic, renewable and biodegradable. Lignin nanoparticles (LNPs) have high specific surface area and specific surface charges. It provides LNPs with good antibacterial and antioxidant properties. LNPs preparation has become clear, however, the application remains in the early stages. PURPOSE: A review centric research has been conducted, reviewing existing literature to accomplish a basic understanding of the medical applications of LNPs. METHODS: Initially, we extensively counseled the heterogeneity of lignin from various sources. The size and morphology of LNPs from different preparation process were then discussed. Subsequently, we focused on the potential medical applications of LNPs, including drug delivery, wound healing, tissue engineering, and antibacterial agents. Lastly, we explained the significance of LNPs in terms of antibacterial, antioxidant and biocompatibility, especially highlighting the need for an integrated framework to understand a diverse range of medical applications of LNPs. RESULTS: We outlined the chemical structure of different type of lignin, and highlighted the advanced methods for lignin nanoparticles preparation. Moreover, we provided an in-depth review of the potential applications of lignin nanoparticles in various medical fields, especially in drug carriers, wound dressings, tissue engineering components, and antimicrobial agents. CONCLUSION: This review provides a detailed overview on the current state and progression of lignin nanoparticles for medical applications.

Enhancing stem cell therapy efficacy with functional lignin modified cerium-iron nanozyme through magnetic resonance imaging tracking and apoptosis protection in inflammatory environment.

Stem cell transplantation provides a promising approach for addressing inflammation and functional disorders. Nonetheless, the viability of these transplanted cells diminishes significantly within pathological environments, limiting their therapeutic potential. Moreover, the non-invasive tracking of these cells in vivo remains a considerable challenge, hampering the assessment of their therapeutic efficacy. Transition-metal oxide nanocrystals, known for their unique "enzyme-like" catalytic property and imaging capability, provide a new avenue for clinical application. In this study, the lignin as a biocompatible macromolecule was modified with poly (ethylene glycol) through chain-transfer polymerization, and then it was utilized to incorporate superparamagnetic iron oxide and cerium oxide nanocrystals creating a functional nanozyme. The iron oxide nanocrystals self-assembled into the hydrophobic core of nano system, while the in-situ mineralization of cerium oxide particles was carried out with the assistance of peripheral phenolic hydroxyl groups. The product, cerium­iron core-shell nanozyme, enabled effective stem cells labeling through endocytosis and exhibited catalase and superoxide dismutase activities within the cells. As a result, it could scavenge highly destructive hydroxyl radicals and peroxyl radicals, shielding stem cells from apoptosis in inflammatory environment and maintaining their differentiation ability. Additionally, when these functionalized stem cells were administered to mice with acute inflammation, not only did they alleviate disease symptoms, but they also allowed for the visualization using T2-weighted magnetic resonance imaging. This innovative therapeutic approach provides a new strategy for combatting diseases.

Lignin-cellulose complexes derived from agricultural wastes for combined antibacterial and tissue engineering scaffolds for cutaneous leishmaniasis wounds.

Bacterial infections in wounds significantly impair the healing process. The use of natural antibacterial products over synthetic antibiotics has emerged as a new trend to address antimicrobial resistance. An ideal tissue engineering scaffold to treat infected wounds should possess antibacterial properties, while simultaneously promoting tissue regrowth. Synthesis of hydrogel scaffolds with antibacterial properties using hemp shive (HT1/HT2) lignin, sugarcane bagasse (SCB) lignin and cellulose was carried out. All lignin samples had low molecular weights and were constituted of G-type ß-5 dimers, linked by ß-O-4 bonds, as determined by MALDI-TOF-MS. Hemp lignin was more cytotoxic to mouse fibroblasts (L929) compared to SCB lignin. All lignin samples demonstrated antibacterial properties against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Enterococcus faecalis, with greater efficiency against Gram-negative strains. 3D hydrogels were engineered by crosslinking SCB lignin with SCB cellulose in varying weight ratios in the presence of epichlorohydrin. The stiffness of the hydrogels could be tailored by varying the lignin concentration. All hydrogels were biocompatible; however, better fibroblast adhesion was observed on the blended hydrogels compared to the 100% cellulose hydrogel, with the cellulose : lignin 70 : 30 hydrogel showing the highest L929 proliferation and best antibacterial properties with a 24-hour bacterial growth reduction ranging from 30.8 to 57.3%.

Supported of gold nanoparticles on carboxymethyl lignin modified magnetic nanoparticles as an efficient catalyst for reduction of nitroarenes and treatment of human melanoma.

This article represents the synthesis and characterizations of Au NPs immobilized and carboxymethyl lignin (CML) modified Fe3O4 nanoparticles (Fe3O4@CML/Au NPs) following a bio-inspired protocol without the participation of any toxic and harmful reductant or stabilizers. Following various physicochemical methodologies, such as FT-IR, FE-SEM, TEM, EDX, XRD, VSM, and ICP-OES, the textural characteristics and different structural aspects were evaluated. The Fe3O4@CML/Au NPs nanocomposite was subsequently explored towards the catalytic reduction of diverse aromatic nitro functions using green conditions. An excellent yield were achieved within very short reaction time. Nine recycling runs of the nanocatalyst were completed without a discernible loss of catalytic activity, thanks to its easy magnetic recovery. The DPPH assay was carried out to examine the antioxidant effectiveness. The Fe3O4@CML/Au NPs nanocomposite inhibited half of the DPPH in a 250 µg/mL solution. To measure the anti-human melanoma efficacy of Fe3O4@CML/Au NPs nanocomposite, MTT assay was applied on HT144, MUM2C, IPC-298 and SKMEL24 cell lines. Fe3O4@CML/Au NPs nanocomposite had high anti-human melanoma efficacy on above tumor cells. The best finding of anti-human melanoma properties of Fe3O4@CML/Au NPs nanocomposite was seen in the case of the SKMEL24 cell line. The IC50 of Fe3O4@CML/Au NPs nanocomposite was 137, 145, 185, and 125 µg/mL against HT144, MUM2C, IPC-298 and SKMEL24 cells, respectively. This research exhibited remarkable anti-human melanoma and antioxidant efficacies of Fe3O4@CML/Au NPs nanocomposite in the in vitro condition.

Doxorubicin encapsulated blend of sitagliptin-lignin polymeric drug delivery system for effective combination therapy against cancer.

In this research, a sitagliptin-lignin biopolymer (SL) containing zinc selenide quantum dots (ZnSe QDs) and doxorubicin (doxo) was synthesized. The fabricated polymeric drug delivery system was characterized via FTIR, XRD, SEM, TGA, IR, and DSC. SLQD-Doxo exhibited an irregular surface with a 32 nm diameter and well-defined surface chemistry. Drug loading efficiency was assessed at different concentrations, pH levels, time intervals, and temperatures, and drug kinetics were calculated. Maximum drug release was observed at 6 µmol concentration after 24 h, pH of 6.5 and 45 °C. The maximum drug encapsulation efficiency was 81.75 %. SLQD-Doxo demonstrated 24.4 ± 1.04 % anti-inflammatory activity, and the maximum lipoxygenase inhibition in a concentration-dependent manner was 71.45 ± 2.02 %, compared to indomethacin, a standard anticancer drug. The designed system was applied to breast cancer MCF-7 cells to evaluate anticancer activity. Cytotoxicity of SLQD-Doxo resulted in 24.48 ± 1.64 dead cells and 74.39 ± 4.12 viable cells. Lignin's polyphenolic nature resulted in good antioxidant activity of LLQD-Doxo. The combination of SLQD-Doxo was appropriate for drug delivery at high temperatures and acidic pH of tumor cells compared to healthy cells.

Bioactive Lyocell Fibers with Inherent Antibacterial, Antiviral and Antifungal Properties.

Functional Lyocell fibers gain interest in garments and technical textiles, especially when equipped with inherently bioactive features. In this study, Lyocell fibers are modified with an ion exchange resin and subsequently loaded with copper (Cu) ions. The modified Lyocell process enables high amounts of the resin additive (>10%) through intensive dispersion and subsequently, high uptake of 2.7% Cu throughout the whole cross-section of the fiber. Fixation by Na2CO3 increases the washing and dyeing resistance considerably. Cu content after dyeing compared to the original fiber value amounts to approx. 65% for reactive, 75% for direct, and 77% for HT dyeing, respectively. Even after 50 household washes, a recovery of 43% for reactive, 47% for direct and 26% for HT dyeing is proved. XRD measurements reveal ionic bonding of Cu fixation inside the cellulose/ion exchange resin composite. A combination of the fixation process with a change in Cu valence state by glucose/NaOH leads to the formation of Cu2O crystallites, which is proved by XRD. Cu fiber shows a strong antibacterial effect against Staphylococcus aureus and Klebsiella pneumonia bacteria, even after 50 household washing cycles of both >5 log CFU. In nonwoven blends with a share of only 6% Cu fiber, a strong antimicrobial (CFU > log 5) and full antiviral effectiveness (>log 4) was received even after 50 washing cycles. Time-dependent measurements already show strong antiviral behavior after 30 s. Further, the fibers show an increased die off of the fungal isolate Candida auris with CFU log 4.4, and nonwovens made from 6% Cu fiber share a CFU log of 1.7. Findings of the study predestines the fiber for advanced textile processing and applications in areas with high germ loads.