Relationship between depth-wise refractive index and biomechanical properties of human articular cartilage.

Significance: Optical properties of biological tissues, such as refractive index (RI), are fundamental properties, intrinsically linked to the tissue's composition and structure. We hypothesize that, as the RI and the functional properties of articular cartilage (AC) are dependent on the tissue's structure and composition, the RI of AC is related to its biomechanical properties. Aim: This study aims to investigate the relationship between RI of human AC and its biomechanical properties. Approach: Human cartilage samples ( n = 22 ) were extracted from the right knee joint of three cadaver donors (one female, aged 47 years, and two males, aged 64 and 68 years) obtained from a commercial biobank (Science Care, Phoenix, Arizona, United States). The samples were initially subjected to mechanical indentation testing to determine elastic [equilibrium modulus (EM) and instantaneous modulus (IM)] and dynamic [dynamic modulus (DM)] viscoelastic properties. An Abbemat 3200 automatic one-wavelength refractometer operating at 600 nm was used to measure the RI of the extracted sections. Similarly, Spearman's and Pearson's correlation coefficients were employed for non-normal and normal datasets, respectively, to determine the correlation between the depth-wise RI and biomechanical properties of the cartilage samples as a function of the collagen fibril orientation. Results: A positive correlation with statistically significant relations ( p - values < 0.05 ) was observed between the RI and the biomechanical properties (EM, IM, and DM) along the tissue depth for each zone, e.g., superficial, middle, and deep zones. Likewise, a lower positive correlation with statistically significant relations ( p - values < 0.05 ) was also observed for collagen fibril orientation of all zones with the biomechanical properties. Conclusions: The results indicate that, although the RI exhibits different levels of correlation with different biomechanical properties, the relationship varies as a function of the tissue depth. This knowledge paves the way for optically monitoring changes in AC biomechanical properties nondestructively via changes in the RI. Thus, the RI could be a potential biomarker for assessing the mechanical competency of AC, particularly in degenerative diseases, such as osteoarthritis.

Guided wave elastography of human skins with a layered model incorporating the effect of muscle state.

In vivo mechanical characterization of skin finds broad applications in understanding skin aging, diagnosis of some skin diseases and assessing the effectiveness of diverse skin care strategies. Skin has a layered structure consisting of the epidermis, dermis and subcutaneous layers. Although much effort has been made towards mechanical characterization of skin, it remains a challenging issue to measure the mechanical properties of an individual layer in vivo. To address this issue, we here report a guided wave elastography method for layered human skin which incorporates the effect of muscle states. Both finite element simulations and phantom experiments have been performed to validate the method. For skin-mimicking phantoms with different fat layer thicknesses, the errors in the identified shear modulus of the skin layers are no more than 11 %. In vivo experiments have been carried out on 6 healthy subjects to demonstrate the potential use of the method in clinics. A statistical analysis indicates the muscle contraction contributes to the stiffening of the skin (p < 0.001). Finally, a phase diagram has been constructed to reveal the extent to which muscle sates (including both passive and active states) affect the measurement of elastic modulus of a skin layer, which may guide the application of the method in practice.

How Static and Cyclic Loading Affect the Mechanical Properties of the Porcine Annulus Fibrosus.

This study sought to evaluate the effects of prolonged cyclic loading on the tissue-level mechanical properties of the spinal annulus fibrosus. Functional spinal units (FSUs) were obtained from porcine cervical spines at the C3-C4 and C5-C6 levels. Following a 15-min preload of 300 N of axial compression, the FSUs were split into three groups: the cyclic loading group cycled between 0.35 MPa and 0.95 MPa for 2 h (n = 8); the static loading group was compressed at 0.65 MPa for 2 h (n = 10); and a control group which only underwent the 300 N preload (n = 11). Following loading, samples of the annulus were excised to perform intralamellar tensile testing and interlamellar 180 deg peel tests. Variables analyzed from the intralamellar test were stress and strain at the end of the toe region, stress and strain at initial failure (yield point), Young's modulus, ultimate stress, and strain at ultimate stress. Variables evaluated from the interlamellar tests were lamellar adhesion strength, adhesion strength variability, and stiffness. The analysis showed no significant differences between conditions on any measured variable; however, there was a trend (p = 0.059) that cyclically loaded tissues had increased adhesion strength variability compared to the static and control conditions. The main finding of this study is that long-duration axial loading did not impact the intra- or interlamellar mechanical properties of the porcine annulus. A trend of increased adhesion strength variability in cyclically loaded samples could indicate a potential predisposition of the annulus to delamination.

Elastic response of trabecular bone under compression calculated using the firm and floppy boundary lattice element method.

Micro-Finite Element analysis (µFEA) has become widely used in biomechanical research as a reliable tool for the prediction of bone mechanical properties within its microstructure such as apparent elastic modulus and strength. However, this method requires substantial computational resources and processing time. Here, we propose a computationally efficient alternative to FEA that can provide an accurate estimation of bone trabecular mechanical properties in a fast and quantitative way. A lattice element method (LEM) framework based on the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) open-source software package is employed to calculate the elastic response of trabecular bone cores. A novel procedure to handle pore-material boundaries is presented, referred to as the Firm and Floppy Boundary LEM (FFB-LEM). Our FFB-LEM calculations are compared to voxel- and geometry-based FEA benchmarks incorporating bovine and human trabecular bone cores imaged by micro Computed Tomography (µCT). Using 14 computer cores, the apparent elastic modulus calculation of a trabecular bone core from a µCT-based input with FFB-LEM required about 15 min, including conversion of the µCT data into a LAMMPS input file. In contrast, the FEA calculations on the same system including the mesh generation, required approximately 30 and 50 min for voxel- and geometry-based FEA, respectively. There were no statistically significant differences between FFB-LEM and voxel- or geometry-based FEA apparent elastic moduli (+24.3% or +7.41%, and +0.630% or -5.29% differences for bovine and human samples, respectively).

Biomechanical characterization of cadaveric brachial plexus regions using uniaxial tensile tests.

INTRODUCTION: The proximal regions of the brachial plexus (roots, trunks) are more susceptible to permanent damage due to stretch injuries than the distal regions (cords, terminal branches). A better description of brachial plexus mechanical behavior is necessary to better understand deformation mechanisms in stretch injury. The purpose of this study was to model the biomechanical behavior of each portion of the brachial plexus (roots, trunks, cords, peripheral nerves) in a cadaveric model and report differences in elastic modulus, maximum stress and maximum strain. METHODS: Eight cadaveric plexi, divided into 47 segments according to regions of interest, underwent cyclical uniaxial tensile tests, using a BOSE® Electroforce® 3330 and INSTRON® 5969 material testing machines, to obtain the stress and strain histories of each specimen. Maximum stress, maximum strain and elastic modulus were extracted from the load-displacement and stress-strain curves. Statistical analyses used 1-way ANOVA with post-hoc Tukey HSD (Honestly Significant Difference) and Mann-Whitney tests. RESULTS: Mean elastic modulus was 8.65 MPa for roots, 8.82 MPa for trunks, 22.44 MPa for cords, and 26.43 MPa for peripheral nerves. Differences in elastic modulus and in maximum stress were statistically significant (p < 0.001) between proximal (roots, trunks) and distal (cords, peripheral nerves) specimens. CONCLUSIONS: Proximal structures demonstrated significantly smaller elastic modulus and maximum stress than distal structures. These data confirm the greater fragility of proximal regions of the brachial plexus.

Intramuscular fat infiltration influences mechanical properties during muscle contraction in older women.

Although evidence suggests that intramuscular fat infiltration may influence muscle strength, the precise mechanisms remain unclear. This study aimed to determine whether intramuscular fat infiltration affects muscle mechanical properties during contraction and whether these mechanical properties mediate the relationship between intramuscular fat infiltration and muscle strength. Seventy-nine healthy older women aged 75.1 ± 6.8 years were included in this study. The echo intensity (EI) of the vastus lateralis (VL) was measured as an intramuscular fat infiltration index using B-mode ultrasonography. Maximum voluntary isometric contraction strength (MVIC) was assessed using a dynamometer. The VL shear elastic modulus (G), a mechanical property index, was measured using ultrasound shear wave elastography under various muscle contraction conditions, at rest and at 15%, 30%, and 45% MVIC (G0, G15, G30, and G45). To evaluate the degree of increase in the shear elastic modulus with increasing muscle contraction intensity, the slope of the regression line (Gslope) between muscle contraction and shear elastic modulus was calculated for each participant. The results showed that EI was significantly associated with G30 and G45 but not with G0 or G15. The EI can significantly explain the inter-individual differences in Gslope. Mediation analysis revealed that the effect of EI on MVIC through Gslope was significant (indirect effect = -0.31, 95% confidence interval (-0.57, -0.12)). These findings suggest that a greater EI is associated with a lower G during muscle contraction. Furthermore, our results show that the relationship between EI and MVIC is mediated by Gslope.

Quantification of Cervical Elasticity During Pregnancy Based on Transvaginal Ultrasound Imaging and Stress Measurement.

Strain elastography and shear wave elastography are commonly used to quantify cervical elasticity. However, the absence of stress information in strain elastography causes difficulty in inter-session elasticity comparison, and the robustness of shear wave elastography is compromised by cervical tissue's high inhomogeneity. OBJECTIVE: To overcome these limitations, we develop a quantitative cervical elastography system by adding a stress sensor to a clinically used transvaginal ultrasound imaging system. METHODS: We record the cervical deformation in B-mode images and measure the probe-surface stress through the sensor. Then we quantify the strain using a customized algorithm and estimate the cervical Young's modulus through stress-strain linear regression. RESULTS: In phantom experiments, we demonstrate the system's high accuracy (alignment with the quasi-static compression method, p-value = 0.369 > 0.05), robustness (alignment between 60°- and 90°-contact measurements, p-value = 0.638 > 0.05), repeatability (consistency of single sonographers' measurements, coefficient of variation < 0.06), and reproducibility (alignment between two sonographers' measurements, Pearson correlation coefficient = 0.981). Applying it to pregnant participants, we observe significant cervical softening (p-value < 0.001): Young's modulus decreases 3.95% weekly and its geometric mean value during the first (11 to 13 weeks), second, and third trimesters are 13.07 kPa, 7.59 kPa, and 4.40 kPa, respectively. CONCLUSION: The proposed system is accurate, robust, and safe, and enables longitudinal and inter-examiner comparisons. SIGNIFICANCE: The system applies to different ultrasound machines with minor software updates, which allows for studies of cervical softening patterns in pregnancy for larger populations, facilitating insights into conditions such as preterm birth.

Effects of two types of surface treatments on the structural elasticity of human fingernails.

BACKGROUND: The human nail has a three-layered structure. Although it would be useful to quantitatively evaluate the changes in deformability of the nail due to various surface treatments, few studies have been conducted. METHODS: The effects of two types of surface treatment-a chemically acting nail softener and a physically acting nail strengthener-on the deformability of human fingernails were investigated. The Young's modulus of each plate of the nail samples before and after softening treatment was determined by nanoindentation. The Young's modulus of the strengthener was determined by conducting a three-point bending test on a polyethylene sheet coated with the strengthener. RESULTS: Young's modulus decreased in order from the top plate against the softening treatment time, and the structural elasticity for bending deformation (SEB) of the nail sample, which expresses the deformability against bending deformation independent of its external dimensions, decreased to 60% after 6 h of treatment. The Young's modulus of the nail strengthener was 244.5 MPa, which is less than 10% of the SEB of the nail. When the nail strengthener was applied to the nail surface, the SEB decreased to 73%, whereas the flexural rigidity increased to 117%. CONCLUSION: Changes in nail deformability caused by various surface treatments for softening and hardening were quantitatively evaluated successfully.

Evidence of different sensitivity of muscle and tendon to mechano-metabolic stimuli.

This study aimed to examine the temporal dynamics of muscle-tendon adaptation and whether differences between their sensitivity to mechano-metabolic stimuli would lead to non-uniform changes within the triceps surae (TS) muscle-tendon unit (MTU). Twelve young adults completed a 12-week training intervention of unilateral isometric cyclic plantarflexion contractions at 80% of maximal voluntary contraction until failure to induce a high TS activity and hence metabolic stress. Each participant trained one limb at a short (plantarflexed position, 115°: PF) and the other at a long (dorsiflexed position, 85°: DF) MTU length to vary the mechanical load. MTU mechanical, morphological, and material properties were assessed biweekly via simultaneous ultrasonography-dynamometry and magnetic resonance imaging. Our hypothesis that tendon would be more sensitive to the operating magnitude of tendon strain but less to metabolic stress exercise was confirmed as tendon stiffness, Young's modulus, and tendon size were only increased in the DF condition following the intervention. The PF leg demonstrated a continuous increment in maximal AT strain (i.e., higher mechanical demand) over time along with lack of adaptation in its biomechanical properties. The premise that skeletal muscle adapts at a higher rate than tendon and does not require high mechanical load to hypertrophy or increase its force potential during exercise was verified as the adaptive changes in morphological and mechanical properties of the muscle did not differ between DF and PF. Such differences in muscle-tendon sensitivity to mechano-metabolic stimuli may temporarily increase MTU imbalances that could have implications for the risk of tendon overuse injury.

Effective Stretching Positions of the Piriformis Muscle Evaluated Using Shear Wave Elastography.

CONTEXT: Piriformis syndrome is often associated with muscle spasms and shortening of the piriformis muscle (PM). Physical therapy, including static stretching of the PM, is one of the treatments for this syndrome. However, the effective stretching position of the PM is unclear in vivo. This study aimed to determine the effective stretching positions of the PM using ultrasonic shear wave elastography. DESIGN: Observational study. METHODS: Twenty-one healthy young men (22.7 [2.4] y) participated in this study. The shear elastic modulus of the PM was measured at 12 stretching positions using shear wave elastography. Three of the 12 positions were tested with maximum internal rotation at 0°, 20°, or 40° hip adduction in 90° hip flexion. Nine of the 12 positions were tested with maximum external rotation at positions combined with 3 hip-flexion angles (70°, 90°, and 110°) and 3 hip-adduction angles (0°, 20°, and 40°). RESULTS: The shear elastic modulus of the PM was significantly higher in the order of 40°, 20°, and 0° of adduction and higher in external rotation than in internal rotation. The shear elastic modulus of the PM was significantly greater in combined 110° hip flexion and 40° adduction with maximum external rotation than in all other positions. CONCLUSION: This study revealed that the position in which the PM was most stretched was maximum external rotation with 110° hip flexion and 40° hip adduction.

Mechanical Evaluation of Human Cadaveric Lumbar Soft Tissues Suggests Possible Physiological Stress Shielding Within Musculoskeletal Soft Tissues by the Thoracolumbar Fascia.

OBJECTIVE: This study investigates the potential for stress shielding within musculoskeletal soft tissues through analysis of stress distributions between lumbar fascial and muscle tissues via mechanical testing. METHODS: Using a custom apparatus, 51 posterior thoracolumbar fascia (TLF) samples and 18 erector spinae (ES) cadaveric samples underwent tensile testing involving three loading-unloading cycles, followed by loading to 6% strain, to mechanically characterize samples. Parallel tensile testing using 20 pairs of two TLF samples, and seven pairs of TLF and ES samples was then conducted for stress distribution analysis between tissues. P<0.05 was deemed significant. RESULTS: The TLF and ES exhibited an average elastic modulus of 150.9 MPa and 0.69 MPa, respectively. At 6% strain, parallel testing of the TLF pairs yielded an average tensile stress of 8.49 MPa and 1.7MPa (p<0.001) exhibited by the stiffer and less stiff TLF samples, respectively. Similarly, TLF-ES parallel testing resulted in average tensile stresses of 7.19 MPa and 0.079 MPa of the TLF and ES (p<0.002). CONCLUSION: Results suggest elevated loading towards stiffer TLF samples relative to less stiff TLF and ES samples. In soft tissues affected by LBP, skewed stress distributions may result in the TLF withstanding the majority of stress, yielding cyclical stress shielding that may contribute to and/or promote LBP. SIGNIFICANCE: This novel study demonstrates a potential load allocation bias towards the TLF, laying the foundation for stress shielding within lumbar musculoskeletal soft tissues affected by degenerative musculoskeletal conditions.

Shear-Wave Elastography of the Achilles tendon: reliability analysis and impact of parameters modulating elasticity values.

PURPOSE: Shear wave elastography (SWE) has seen many advancements in Achilles tendon evaluation in recent years, yet standardization of this technique is still problematic due to the lack of knowledge regarding the optimal way to perform the examination. The purpose of this study was to evaluate the effects of ankle position, probe frequency and physical effort on the shear modulus of the Achilles tendon, but also to determine the intra and inter-observer reliability of the technique. METHODS: 37 healthy volunteers were included; SWE protocol was performed by two examiners. We analyzed the shear modulus of the tendon with the ankle in neutral, maximum dorsiflexion and maximum plantar flexion using two different high frequency probes. Afterwards, the subjects performed a brief physical exercise and SWE measurements were repeated. RESULTS: The L18-5 probe showed the highest ICC values (ICC = 0.798, 95% CI 0.660-0.880, p < 0.001) when positioned at 2 cm from the calcaneal insertion with the ankle in a neutral state. Conversely, utilizing the same L18-5 probe at 1 cm from the insertion during maximum plantar flexion of the ankle resulted in the lowest ICC (ICC = 0.422, 95% CI 0.032-0.655, p = 0.019). Significant variations in elasticity values were noted among different ankle positions and probe types, while no significant changes in elasticity were observed post-physical exercise. CONCLUSION: Ankle position and probe frequency are factors that influence elasticity values of the Achilles tendon. An ankle position between 10 and 20 degrees of plantar flexion is the most suitable for SWE evaluation. However, more research focusing on Achilles tendon SWE is essential due to the challenges encountered in standardizing this region.

Phase-Domain Photoacoustic Mechanical Imaging for Quantitative Elastography and Viscography.

The role and importance of mechanical properties of cells and tissues in pathophysiological processes have widely been acknowledged. However, current elastography techniques most based on transverse elastic waves, diminish the translation of wave speed into elastic modulus due to its limited wave propagation direction. Here, we propose phase-domain photoacoustic mechanical imaging (PD-PAMI), leveraging the initial time and phase response characteristics of an omnidirectional photoacoustic elastic wave to quantitatively extract elastic and viscous moduli. Theoretical simulations and experiment on tissue-mimicking phantoms with different levels of viscoelastic properties were conducted to validate the approach with a precision in elasticity and viscosity estimation of 4.6% and 6.6%, respectively. The trans-scale viscoelasticity mappings over three length scales-covering cell, tissue section, and in vivo organ, were provided to demonstrate the scalability of the technique with different implementations of PD-PAMI. Experiments on animal models of breast tumour and atherosclerosis reveal that PD-PAMI technique enables effective monitoring of the viscoelastic parameters for examinations of the diseases involved with the variations in collagen or lipid composition and in inflammation level. PD-PAMI technique opens new perspectives of conventional PA imaging and provides new technical way for biomechanical imaging, prefiguring potential clinical applications in mechanopathology-involved disease diagnosis.

Comprehensively characterizing heterogeneous and transversely isotropic properties of femur cortical bones.

Comprehensive characterization of the transversely isotropic mechanical properties of long bones along both the longitudinal and circumferential gradients is crucial for developing accurate mathematical models and studying bone biomechanics. In addition, mechanical testing to derive elastic, plastic, and failure properties of bones is essential for modeling plastic deformation and failure of bones. To achieve these, we machined a total of 336 cortical specimens, including 168 transverse and 168 longitudinal specimens, from four different quadrants of seven different sections of 3 bovine femurs. We conducted three-point bending tests of these specimens at a loading rate of 0.02 mm/s. Young's modulus, yield stress, tangential modulus, and effective plastic strain for each specimen were derived from correction equations based on classical beam theory. Our statistical analysis reveals that the longitudinal gradient has a significant effect on the Young's modulus, yield stress, and tangential modulus of both longitudinal and transverse specimens, whereas the circumferential gradient significantly influences the Young's modulus, yield stress, and tangential modulus of transverse specimens only. The differences in Young's modulus and yield stress between longitudinal specimens from different sections are greater than 40%, whereas those between transverse specimens are approximately 30%. The Young's modulus and yield stress of transverse specimens in the anterior quadrant were 18.81%/15.46% and 18.34%/14.88% higher than those in the posterior and lateral quadrants, respectively. There is no significant interaction between the longitudinal gradient and the circumferential gradient. Considering the transverse isotropy, it is crucial to consider loading direction when investigating the impact of circumferential gradients in the anterior, lateral, medial, and posterior directions. Our findings indicate that the conventional assumption of homogeneity in simulating the cortical bone of long bones may have limitations, and researchers should consider the anatomical position and loading direction of femur specimens for precise prediction of mechanical responses.

In plane quantification ofin vivomuscle elastic anisotropy factor by steered ultrasound pushing beams.

Objective.Skeletal muscles are organized into distinct layers and exhibit anisotropic characteristics across various scales. Assessing the arrangement of skeletal muscles may provide valuable biomarkers for diagnosing muscle-related pathologies and evaluating the efficacy of clinical interventions.Approach. In this study, we propose a novel ultrafast ultrasound sequence constituted of steered pushing beams was proposed for ultrasound elastography applications in transverse isotropic muscle. Based on the propagation of the shear wave vertical mode, it is possible to fit the experimental results to retrieve in the same imaging plane, the shear modulus parallel to fibers as well as the elastic anisotropy factor (ratio of Young's moduli times the shear modulus perpendicular to fibers).Main results. The technique was demonstratedin vitroin phantoms andex vivoin fusiform beef muscles. At last, the technique was appliedin vivoon fusiform muscles (biceps brachii) and mono-pennate muscles (gastrocnemius medialis) during stretching and contraction.Significance. This novel sequence provides access to new structural and mechanical biomarkers of muscle tissue, including the elastic anisotropy factor, within the same imaging plane. Additionally, it enables the investigation of multiples parameters during muscle active and passive length changes.

Changes in passive and active hamstrings shear modulus are not related after a warmup protocol.

This study aimed to determine whether changes in hamstrings passive and active shear modulus after a warmup protocol are correlated. Twenty males without a history of hamstring strain injury participated. Muscle shear modulus was assessed using ultrasound-based shear wave elastography at rest and during isometric contractions at 20% of maximal voluntary isometric effort before and immediately after a warmup protocol. Changes in passive shear modulus did not seem to be associated with changes in active shear modulus. The results of this study suggest that changes in passive and active hamstring shear modulus are not associated after a standardized warmup intervention.

Quantifying the Impact of Cancer on the Viscoelastic Properties of the Prostate Gland using a Quasi-Linear Viscoelastic Model.

Pathological disorders can alter the mechanical properties of biological tissues, and studying such changes can help to better understand the disease progression. The prostate gland is no exception, as previous studies have shown that cancer can affect its mechanical properties. However, most of these studies have focused on the elastic properties of the tissue and have overlooked the impact of cancer on its viscous response. To address this gap, we used a quasi-linear viscoelastic model to investigate the impact of cancer on both the elastic and viscous characteristics of the prostate gland. By comparing the viscoelastic properties of segments influenced by cancer and those unaffected by cancer in 49 fresh prostates, removed within two hours after prostatectomy surgery, we were able to determine the influence of cancer grade and tumor volume on the tissue. Our findings suggest that tumor volume significantly affects both the elastic modulus and viscosity of the prostate (p-value less than 2%). Specifically, we showed that cancer increases Young's modulus and shear relaxation modulus by 20%. These results have implications for using mechanical properties of the prostate as a potential biomarker for cancer. However, developing an in vivo apparatus to measure these properties remains a challenge that needs to be addressed in future research. STATEMENT OF SIGNIFICANCE: This study is the first to explore how cancer impacts the mechanical properties of prostate tissues using a quasi-linear viscoelastic model. We examined 49 fresh prostate samples collected immediately after surgery and correlated their properties with cancer presence identified in pathology reports. Our results demonstrate a 20% change in the viscoelastic properties of the prostate due to cancer. We initially validated our approach using tissue-mimicking phantoms and then applied it to differentiate between cancerous and normal prostate tissues. These findings offer potential for early cancer detection by assessing these properties. However, conducting these tests in vivo remains a challenge for future research.

Patellar Tendon Adaptations to Downhill Running Training and Their Relationships With Changes in Mechanical Stress and Loading History.

ABSTRACT: Bontemps, B, Gruet, M, Louis, J, Owens, DJ, Miríc, S, Vercruyssen, F, and Erskine, RM. Patellar tendon adaptations to downhill running training and their relationships with changes in mechanical stress and loading history. J Strength Cond Res 38(1): 21-29, 2024-It is unclear whether human tendon adapts to moderate-intensity, high-volume long-term eccentric exercise, e.g., downhill running (DR) training. This study aimed to investigate the time course of patellar tendon (PT) adaptation to short-term DR training and to determine whether changes in PT properties were related to changes in mechanical stress or loading history. Twelve untrained, young, healthy adults (5 women and 7 men) took part in 4 weeks' DR training, comprising 10 sessions. Running speed was equivalent to 60-65% V̇O2max, and session duration increased gradually (15-30 minutes) throughout training. Isometric knee extensor maximal voluntary torque (MVT), vastus lateralis (VL) muscle physiological cross-sectional area (PCSA) and volume, and PT CSA, stiffness, and Young's modulus were assessed at weeks 0, 2, and 4 using ultrasound and isokinetic dynamometry. Patellar tendon stiffness (+6.4 ± 7.4%), Young's modulus (+6.9 ± 8.8%), isometric MVT (+7.5 ± 12.3%), VL volume (+6.6 ± 3.2%), and PCSA (+3.8 ± 3.3%) increased after 4 weeks' DR (p < 0.05), with no change in PT CSA. Changes in VL PCSA correlated with changes in PT stiffness (r = 0.70; p = 0.02) and Young's modulus (r = 0.63; p = 0.04) from 0 to 4 weeks, whereas changes in MVT did not correlate with changes in PT stiffness and Young's modulus at any time point (p > 0.05). To conclude, 4 weeks' DR training promoted substantial changes in PT stiffness and Young's modulus that are typically observed after high-intensity, low-volume resistance training. These tendon adaptations seemed to be driven primarily by loading history (represented by VL muscle hypertrophy), whereas increased mechanical stress throughout the training period did not seem to contribute to changes in PT stiffness or Young's modulus.

Optimal mechanical interactions direct multicellular network formation on elastic substrates.

Cells self-organize into functional, ordered structures during tissue morphogenesis, a process that is evocative of colloidal self-assembly into engineered soft materials. Understanding how intercellular mechanical interactions may drive the formation of ordered and functional multicellular structures is important in developmental biology and tissue engineering. Here, by combining an agent-based model for contractile cells on elastic substrates with endothelial cell culture experiments, we show that substrate deformation-mediated mechanical interactions between cells can cluster and align them into branched networks. Motivated by the structure and function of vasculogenic networks, we predict how measures of network connectivity like percolation probability and fractal dimension as well as local morphological features including junctions, branches, and rings depend on cell contractility and density and on substrate elastic properties including stiffness and compressibility. We predict and confirm with experiments that cell network formation is substrate stiffness dependent, being optimal at intermediate stiffness. We also show the agreement between experimental data and predicted cell cluster types by mapping a combined phase diagram in cell density substrate stiffness. Overall, we show that long-range, mechanical interactions provide an optimal and general strategy for multicellular self-organization, leading to more robust and efficient realizations of space-spanning networks than through just local intercellular interactions.

Detecting age-related changes in skeletal muscle mechanics using ultrasound shear wave elastography.

Aging leads to a decline in muscle mass and force-generating capacity. Ultrasound shear wave elastography (SWE) is a non-invasive method to capture age-related muscular adaptation. This study assessed biceps brachii muscle (BB) mechanics, hypothesizing that shear elastic modulus reflects (i) passive muscle force increase imposed by length change, (ii) activation-dependent mechanical changes, and (iii) differences between older and younger individuals. Fourteen healthy volunteers aged 60-80 participated. Shear elastic modulus, surface electromyography, and elbow torque were measured at five elbow positions in passive and active states. Data collected from young adults aged 20-40 were compared. The BB passive shear elastic modulus increased from flexion to extension, with the older group exhibiting up to 52.58% higher values. Maximum elbow flexion torque decreased in extended positions, with the older group 23.67% weaker. Significant effects of elbow angle, activity level, and age on total and active shear elastic modulus were found during submaximal contractions. The older group had 20.25% lower active shear elastic modulus at 25% maximum voluntary contraction. SWE effectively quantified passive and activation-dependent BB mechanics, detecting age-related alterations at rest and during low-level activities. These findings suggest shear elastic modulus as a promising biomarker for identifying altered muscle mechanics in aging.