[Transverse characteristics of normodivergent patients in different sagittal skeletal patterns].

PURPOSE: This study aimed to measure and analyze the transverse indicators of normodivergent patients with different sagittal skeletal malocclusions, to explore the transverse characteristics of different sagittal skeletal malocclusions. METHODS: Lateral cephalograms and CBCT of 90 normodivergent patients with skeletal Class Ⅰ, Ⅱ and Ⅲ in their permanent dentition were collected. Dolphin software was applied to measure the widths of the basal bone, alveolar bone, dental arch and buccolingual inclination angle of the corresponding teeth in the maxillary and mandibular canine, premolar and molar areas. SPSS 22.0 software package was applied for statistical analysis of the data. RESULTS: The widths of the mandibular basal bone in canine, premolar and molar areas of skeletal Class Ⅲ were (27.15±2.74), (39.30±2.82) and (59.97±2.93) mm, respectively. The widths of the mandibular alveolar bone of skeletal Class Ⅲ were (25.38±1.78), (34.51±2.28) and (47.72±2.73) mm, respectively. The dental arch widths of the maxillary premolar and mandibular canine areas of skeletal Class Ⅲ were (48.70±2.35) and (30.69±2.31)mm, respectively. The above data of skeletal Class Ⅲ were significantly larger than those of skeletal Class Ⅰ and Ⅱ(P＜0.01). The dental arch widths of the maxillary canine, maxillary molar and mandibular molar areas of skeletal Class Ⅲ were (38.88±1.90), (59.51±3.40) and (56.01±2.86)mm, respectively, which were significantly larger than those of skeletal Class Ⅱ(P＜0.05). The maxillomandibular width difference of basal bone in the canine, premolar and molar areas of skeletal Class Ⅲ were (4.69±2.84), (2.31±2.39) and (3.27±2.05) mm, respectively, which were significantly less than that of skeletal Class Ⅰ and Ⅱ(P＜0.01). Compared with skeletal Class Ⅰ, the maxillary canines and first molars of skeletal Class Ⅱ had larger lingual inclination level, while the maxillary first premolars and first molars of skeletal Class Ⅲ had larger buccal inclination level, the mandibular canines and the mandibular first premolars of skeletal Class Ⅲ had larger lingual inclination level(P＜0.01). CONCLUSIONS: For normodivergent patients, the width of the mandibular base bone, alveolar bone, and maxillary and mandibular dental arch in skeletal Class Ⅲ is the widest, which is more likely to have width discrepancy in basal bone. In skeletal Class Ⅲ, the maxillary teeth are buccally inclined, and the mandibular teeth are ingually inclined. In skeletal Class Ⅱ, the maxillary teeth are lingually inclined, and the mandibular teeth are compensatory upright.

Comparative evaluation of transverse width indices for diagnosing maxillary transverse deficiency.

OBJECTIVES: This study aimed to compare and evaluate different transverse width indices for diagnosing maxillary transverse deficiency (MTD), a common malocclusion characterized by uncoordinated dental arches, crossbites, and tooth crowding. MATERIALS AND METHODS: Sixty patients aged 7-12 years were included in the study, with 20 patients diagnosed with MTD and 40 normal controls. Transverse width indices, including maxillary width at the buccal alveolar crest and lingual midroot level, as well as at the jugal process width, were measured. Differences between these indices and their corresponding mandibular indices were used as standardized transverse width indices. The reference range of these indices was determined and evaluated. Receiver operating characteristic (ROC) analysis was performed to evaluate their diagnostic ability. RESULTS: The transverse width indices and standardized transverse width indices of the MTD group were significantly smaller than those of the control group, except for the jugal process width. The evaluation of the reference range and ROC analysis revealed that the difference of the maxillomandibular width at buccal alveolar crest was the most accurate diagnostic method. CONCLUSIONS: The jugal point analysis method may not be suitable for diagnosing MTD. Instead, measuring the difference in maxillomandibular width at the buccal alveolar crest proves to be a more reliable and accurate diagnostic method for MTD.

Evaluation of the soft tissue facial profile in different skeletal malocclusions in relation to age.

BACKGROUND: The aim of the study was to assess the thickness of the soft tissue facial profile (STFP) in relation to the skeletal malocclusion, age and gender. METHODS: All patients, aged 7-35 years, who were seeking orthodontic treatment at the Department of Orthodontics, Medical University of Warsaw between 2019 and 22 were included in the study. All patients had lateral head radiographs taken before the treatment. The cephalometric analysis was performed including the STFP analysis. The patients were allocated to one of six groups based on age and skeletal relations (ANB angle). The minimum number of patients in each group was 60 with equal gender distribution. The STFP analysis included ten linear measurements. RESULTS: A total of 300 patients were included in the study and allocated to five groups. Group 6 (growing patients with skeletal Class III malocclusion) was not included in the study as it failed to achieve the assumed group size. There were significant differences in the thickness of the STFP in relation to the skeletal malocclusions. Adults with skeletal Class III malocclusion had significantly thicker subnasal soft tissues compared to patients with skeletal Class I and Class II malocclusions. The thickness of the lower lip in patients with Class II skeletal malocclusion was significantly bigger compared to the other groups. Children and adolescents with Class II malocclusions had thicker lower lip in comparison to the group with Class I malocclusion. The majority of the STFP measurements were significantly smaller in children and adolescents compared to adults. The thickness of the STFP in males was significantly bigger in all age groups compared to females. CONCLUSIONS: The thickness of facial soft tissues depends on the patient's age and gender. The degree of compensation of the skeletal malocclusion in the STFP may be a decisive factor during orthodontic treatment planning regarding a surgical approach or a camouflage treatment of skeletal defects.

Influence on the temporomandibular joint induced by mandibular malpositioning caused by vertical dimension elevation and occlusal loss in adult rats: An imaging, histological and immunohistochemical study.

BACKGROUND: Mandibular malpositioning may result in an abnormal concentration of stresses within the temporomandibular joint (TMJ) in adult rats, which may further lead to a series of pathological changes, such as articular cartilage wear, subchondral bone sclerosis and osteophyte formation. However, the pathological and adaptive changes in condylar cartilage caused by different stress distributions are still controversial. OBJECTIVE: The aim of this study was to observe the effect of sagittal changes in mandibular position on condylar cartilage by changing the occlusal vertical dimension (OVD) in adult rats. METHODS: Fifteen-week-old female rats were divided into three groups: control (CON), increased OVD (iOVD) and loss of occlusion (LO) groups. An occlusal plate and tooth extraction were used to establish the animal model. TMJ samples of the experimental and CON groups were observed and investigated by bone morphological, histomorphological and immunohistochemical staining analyses at 3 days, 1 week, 2 weeks, 4 weeks and 8 weeks. Weight curves were plotted. RESULTS: Micro-computed tomography showed that, compared with the CON group, cartilage destruction followed by repair occurred in both experimental groups, which was similar to the trend observed in haematoxylin-eosin staining. All experimental results for the iOVD group showed an approximately similar time trend. Compared with the iOVD group, the toluidine blue and immunohistochemical staining results in the LO group showed no obvious change trend over time. CONCLUSION: Compared with occlusal loss, an increase in OVD caused faster and more severe damage to condylar cartilage, and subchondral bone repair occurred later.

Functional needs in orthognathic patients with different sagittal skeletal discrepancies.

OBJECTIVES: This retrospective study aimed to evaluate the relationship between the Index of Orthognathic Functional Treatment Need (IOFTN) and sagittal skeletal discrepancy (ANB angle) among orthognathic patients. STUDY DESIGN: Records of 403 orthognathic patients (229 females/174 males, aged 16-50 years) were reviewed. Malocclusion type (incisor-based), sagittal skeletal relationship (ANB angle), and IOFTN scores were documented. Spearman correlation coefficient (r) and scatter plots were utilized to examine the relationship between functional need (IOFTN scores) and sagittal skeletal discrepancy (ANB angle). Regression analyses were conducted to determine the extent to which variations in IOFTN scores could be attributed to variations in ANB angles. RESULTS: Class III malocclusion/sagittal skeletal pattern were most prevalent (62.3%). The Spearman correlation coefficient (r) for the entire sample was -0.297 (P < .001), indicating a weak negative correlation. Linear regression analysis demonstrated a coefficient of determination of 0.069, indicating that approximately 6.9% of the variance in IOFTN data could be accounted for by variations in ANB angles. Upon stratifying data by different malocclusions, coefficients of determination were 0.065, 0.034, and 0.089 for class I, II, and class III malocclusions, respectively. CONCLUSION: The observed linear relationships between sagittal skeletal discrepancy (ANB angle) and IOFTN score were weak and lacked clinical significance.

Calcification patterns and morphology of Sella turcica are related to anteroposterior skeletal malocclusions: A cross-sectional study.

BACKGROUND: The sphenoid bone is an irregular, unpaired, symmetrical bone located in the middle of the anterior skull and is involved in craniofacial growth and development. Since the morphology of Sella turcica (ST) is associated with different craniofacial patterns, this study aimed to investigate if there is a correlation between ST morphology on the one hand and sagittal craniofacial patterns on the other hand. METHODS: This study was conducted with a convenience sample that included Brazilian individuals undergoing orthodontic treatment. Lateral cephalograms were used to evaluate the calcification pattern and morphology of ST, as well as skeletal class by analyzing the ANB angle. Pearson's chi-square test with Bonferroni post-hoc test was performed to evaluate the association between ST calcification pattern and morphology, and anteroposterior skeletal malocclusion. The established significance level was 0.05. RESULTS: The study collective was comprised of 305 orthodontic patients (178 (58.4 %) female, 127 (41.6 %) male), who had a mean age of 23.2 (±10.6) years. 131 participants (42.9 %) presented skeletal class I, 142 (46.6%) skeletal Class II, and 32 (10.5%) had a skeletal class III. The degree of prognathism of the mandible showed a homogenous distribution within the study collective (91 (29.9 %) orthognathic, 100 (32.9 %) retrognathic, 113 (37.2 %) prognathic mandible). Concerning the maxilla, 92 (30.2%) individuals presented an orthognathic upper jaw, whereas 60 (19.7%) showed maxillary retrognathism and 153 (50.2%) maxillary prognathism. Compared to patients with skeletal class I, skeletal class III individuals presented significantly more hypertrophic posterior clinoid process (p<0.007) and pyramidal shape of the dorsum of the ST (p<0.038). CONCLUSIONS: Our results suggest that the hypertrophic posterior clinoid process and pyramidal shape of the ST dorsum are more prevalent in individuals with skeletal class III malocclusion.

Do patients with different craniofacial patterns have differences in upper airway volume? A systematic review with network meta-analysis.

BACKGROUND: Craniofacial skeletal discrepancies have been associated with upper airway dimensions. OBJECTIVE: To identify differences in upper airway volume across different sagittal and vertical skeletal patterns. SEARCH METHODS: Unrestricted literature searches in eight databases/registers for human studies until May 2023. SELECTION CRITERIA: Cross-sectional studies measuring upper airway volumes using three-dimensional imaging in healthy patients of different sagittal (Class I, Class II, and Class III) or vertical (normodivergent, hypodivergent, and hyperdivergent) craniofacial morphology. DATA COLLECTION AND ANALYSIS: Duplicate independent study selection, data extraction, and risk of bias assessment. Random-effects frequentist network meta-analysis was performed followed by subgroup-analyses and assessment of the quality of clinical recommendations (confidence in effect estimates) with the CINeMA (Confidence in Network Meta-Analysis) approach. RESULTS: Seventy publications pertaining to 66 unique studies were included with 56 studies (5734 patients) contributing to meta-analyses. Statistically significant differences were found for total  pharyngeal airway volume, with Class II having decreased airway volume (-2256.06 mm3; 95% Confidence Interval [CI] -3201.61 to -1310.51 mm3) and Class III increased airway volume (1098.93 mm3; 95% CI 25.41 to 2172.45 mm3) compared to Class I. Significant airway volume reductions for Class II were localized mostly at the oropharynx, followed by the palatopharynx, and the glossopharynx. Significant airway volume increases for Class III were localized mostly at the oropharynx, followed by the intraoral cavity, and hypopharynx. Statistically significant differences according to vertical skeletal configuration were seen only for the oropharynx, where hyperdivergent patients had reduced volumes compared to normodivergent patients (-1716.77 mm3; 95% CI -3296.42 to -137.12 mm3). Airway differences for Class II and Class III configurations (compared to Class I) were more pronounced in adults than in children and the confidence for all estimates was very low according to CINeMA. CONCLUSIONS: Considerable differences in upper airway volume were found between sagittal and vertical skeletal configurations. However, results should be interpreted with caution due to the high risk of bias, owing to the retrospective study design, inconsistencies in anatomic compartment boundaries used, samples of mixed children-adult patients, and incomplete reporting. CLINICAL TRIAL REGISTRATION: PROSPERO (CRD42022366928).

Three-dimensional analysis of mandibular morphology asymmetry and temporomandibular joint position in patients with unilateral Brodie bite.

OBJECTIVE: Previous studies have shown unilateral posterior crossbite is associated with mandibular asymmetry in morphology and position. However, it remains unclear whether unilateral Brodie bite plays a similar role in mandibular development. Therefore, this study aims to investigate the morphological and positional symmetry of mandibles in patients with unilateral Brodie bite by three-dimensional anaylsis. METHODS: Fourteen patients with unilateral Brodie bite (mean age 18.43 ± 4.24 years) and fourteen sex- and age-matched patients with normal occlusion (mean age 18.07 ± 5.48 years) underwent cone-beam computed tomography (CBCT) scans. 3D surface mesh models of their mandibles were established using Mimics Research 19.0. The surface matching percentage was compared between the original and mirrored mandible by Geomagic Control X software. Furthermore, the dimension and position of the temporomandibular joint (TMJ) were determined for both groups using InVivoDental 5.0. RESULTS: For surface-to-surface deviation analysis, the percentage of mismatch in patients with unilateral Brodie bite was significantly higher than the control group at ±0.50 mm, ±0.75 mm, and ±1.00 mm tolerance (P < .001). In patients with unilateral Brodie syndrome, the condyles on the scissors-bite side showed a significantly more anterior position (P = .03), greater medial inclination (P < .01), and larger posterior TMJ space (P = .01) than the non-scissors-bite side. CONCLUSION: Patients with unilateral Brodie bite exhibit a more asymmetrical mandibular morphology, with a greater anterior condylar position and posterior joint space on the scissors-bite side, indicating that early diagnosis and treatment may be necessary for patients with unilateral Brodie bite.

Accuracy Assessment of Virtual Surgical Planning Comparing 3D Virtual Surgical Planning and Post-Operative CBCTs in Surgical Skeletal Class III Cases: A Retrospective Study

ABSTRACT Objective: To evaluate the accuracy of Virtual Surgical Planning (VSP) comparing VSPs and post-operative CBCT scans in patients undergoing bimaxillary orthognathic surgery of severe Skeletal Class III malocclusion. Material and Methods: Twenty-three patients (9 males and 14 females, mean age 24.1 ± 7.0 years) were selected and submitted to bimaxillary orthognathic surgery. Pre-operative VSPs and post-operative CBCTs were compared using both linear (taking into account four skeletal and six dental landmarks, each one described by the respective coordinates) and angular measures (seven planes in total). The threshold discrepancies for post-operative clinical acceptable results were set at ≤2 mm for liner and ≤4° for angular discrepancies. The mean difference values and its 95% confidence interval were identified, comparing which planned and which obtained in absolute value. Results: There were significant statistical differences for all absolute linear measures investigated, although only two overcome the linear threshold value of 2mm in both X and Y-linear dimensions. Linear deviations in Z-linear dimension do not reach statistical significance. All 12 angular measures reach the statistical significance, although none overcome the threshold angular value of 4°. Angular deviation for roll register the higher accuracy in contrast to pitch and yaw. Conclusion: Virtual surgical planning is a reliable planning method to be used in orthognathic surgery field; as a matter of fact, although some discrepancies between the planned on the obtained are evident, most of them meet the tolerability range.

Arch parameters and dental discrepancy (crowding and spacing) in a sample of an Afro-Colombian population / Parámetros de arco y discrepancia dental (apiñamiento y espaciamiento) en una muestra de población Afrocolombiana

The aim of this study was to determine the differences in arch length, inter-canine distance, inter-premolar distance, intermolar distance and arch shape between dental discrepancies (crowding and spacing) in a sample of dental casts from the Afro-Colombian population of San Basilio de Palenque. An analytical, cross-sectional study was conducted on a convenience sample of 63 subjects aged 11 to 57years, of Afro-Colombian origin, with full dentition from first molar to first molar, without extensive caries or restorations, and excluding casts with defects due to loss. The differences between arch (upper and lower) variables were analyzed according to dental discrepancies. Plaster models digitalized with a TR1OS3 Mono scanner with exactitude (6.9 ± 0.9 pm) and precision (4.5 ± 0.9 pm) were analyzed with Orthonalyzer software. Statistical analyses were done on SPSS software (Version 20 for Windows) and Real Statistics. Spacing discrepancy of68.25% was found for upper arch and 66.66% for lower arch; crowding discrepancy of 19.04% for upper arch and 20.63% for lower arch, and an adequate ratio of 12.69% for both arches. No statistically significant difference (p>0.05) was found between arch parameters except for inter-premolar distance on the lower arch. The most frequent arch shape in the population was oval for both upper arch, with 76.19%, and lower arch, with 71.42%. Tooth size was larger in males than females but the difference was not statistically significant.

El objetivo de este estudio fue determinar las diferencias en longitud de arco, distancia intercanina, interpremolar, intermolar y la forma de arco entre discrepancias dentales (apiñamiento y espaciamiento), en una muestra de modelos dentales de la población afrocolombiana de San Basilio de Palenque. Se realizó un estudio analítico transversal, en una muestra por conveniencia de 63 sujetos con un rango de edad entre 11 y 57 años, de origen afrocolombiano, quienes tuvieron dentición completa de primer molar a primer molar, sin caries extensas, ni restauraciones; se excluyeron los modelos con defectos por el vaciado. Se analizaron las diferencias entre las variables de los maxilares (superior e inferior) con las discrepancias dentales. Se utilizaron modelos de yeso que fueron digitalizados con el escánerTR1OS3 Mono con una exactitud de (6.9 ± 0.9 pm) y una precisión de (4.5 ± 0.9 pm)y analizados con el software Orthonalyzer. Los análisis estadísticos se llevaron a cabo utilizando el software SPSS (Versión 20 para Windows) y Real Statistics. Se encontró una discrepancia de espaciamiento de un 68,25% para el arco superior y 66,66% en el arco inferior; y una discrepancia de apiñamiento en el arco superior de 19,04% e inferior de 20,63% y una relación adecuada de 12,69% para los dos arcos. No se encontraron diferencias estadísticamente significativas (p>0.05) en los parámetros de arco a excepción de la distancia interpremolar del arco inferior. La forma de arco más frecuente en la población fue ovalada tanto en el arco superior con un 76,19% como en el arco inferior con un 71,42%. En cuanto al tamaño dental, se presentó mayor tamaño en los hombres que en las mujeres, pero este no fue estadísticamente significativo.

Developmental association of palatal dimensions and palatal rugae characteristics in Angle´s classes I, II and III of malocclusion / Asociación de desarrollo de las dimensiones palatinas y las características de las rugas palatinas en las clases I, II y III de maloclusión de Angle

During development, bony changes in the palate are reflected in the palatal rugae. Therefore, we hypothesized that the palatal dimensions (PD) influence the shape and number of palatal rugae (PR). The objectives were to record the palatal rugae characteristics (PRC) and palatal dimensions (intercanine distance (ICD), intermolar distance (IMD), palatal height (PH) and palatal area (PA) in Classes I, II and III malocclusion patients and investigate their interrelationship, and statistically examine the possibility of predicting PRC with the PD. Four hundred eighty-one pre-orthodontic study casts of healthy patients with normal palate anatomy were grouped as Classes I, II and III and scanned using 3D cast scanner. The PRC, ICD, IMD, PH, and PA were recorded digitally using 3D enabled software. The data was statistically analyzed. A strong statistically significant difference was observed between PA and number of straight and wavy rugae. ICD and the number of straight rugae were also related. A weak correlation exists between malocclusion classes and PA. The remaining rugae characteristics did not exhibit any relation with palatal dimensions. PA is positively related to the number of straight rugae and negatively related to the number of wavy rugae. Bigger palates have more straight rugae and less number of wavy rugae. A weak correlation between PA and Angle's class I malocclusion exists. We also propose that PA has a developmental association with the number and shape of PR.

Durante el desarrollo, los cambios óseos en el paladar se reflejan en las rugas palatinas. Por lo tanto, planteamos la hipótesis de que las dimensiones palatinas influyen en la forma y el número de las rugas palatinas. Los objetivos fueron registrar las características de las rugas palatinas y las dimensiones palatales (distancia intercanina, distancia intermolar, altura palatina y área palatina) en pacientes con maloclusión de clases I, II y III e investigar su interrelación, y examinar estadísticamente la posibilidad de predecir las características de las rugas palatinas con las dimensiones palatinas. Cuatrocientos ochenta y un estudios pre-ortodónticos de pacientes sanos con anatomía normal del paladar se agruparon como Clases I, II y III y se escanearon con un escáner de emisión 3D. La distancia intercanina, distancia inter molar, altura palatina y área palatina se registraron digitalmente utilizando el software 3D. Los datos se analizaron estadísticamente. Se observó una diferencia estadísticamente significativa entre la altura palatina y el número de rugas rectas y onduladas. Se registró también la distancia intercanina y el número de rugas rectas. Existe una correlación débil entre las clases de maloclusión y la altura palatina. Las características restantes de las rugas palatinas no mostraron ninguna relación con las dimensiones palatinas. El área palatina está relacionada positivamente con el número de rugas rectas y negativamente relacionada con el número de rugas onduladas. Los paladares más grandes tienen más rugas rectas y menor cantidad de rugas onduladas. Existe una correlación débil entre el área palatina y la clase I de maloclusión de Angle. También proponemos que el área palatina tiene una asociación de desarrollo con el número y la forma de rugas palatinas.

Mandibular anterior crowding: normal or pathological?

ABSTRACT The teeth become very close to each other when they are crowded, but their structures remain individualized and, in this situation, the role of the epithelial rests of Malassez is fundamental to release the EGF. The concept of tensegrity is fundamental to understand the responses of tissues submitted to forces in body movements, including teeth and their stability in this process. The factors of tooth position stability in the arch - or dental tensegrity - should be considered when one plans and perform an orthodontic treatment. The direct causes of the mandibular anterior crowding are decisive to decide about the correct retainer indication: Should they be applied and indicated throughout life? Should they really be permanently used for lifetime? These aspects of the mandibular anterior crowding and their implication at the orthodontic practice will be discussed here to induct reflections and insights for new researches, as well as advances in knowledge and technology on this subject.

RESUMO Os dentes ficam muito próximos quando estão apinhados, mas suas estruturas permanecem individualizadas e, nessa situação, o papel dos restos epiteliais de Malassez é fundamental para liberar o EGF. A tensigridade é um conceito chave para compreender as respostas dos tecidos submetidos às forças nos movimentos corporais, incluindo os dentes e sua estabilidade nesse processo. Os fatores da estabilidade de posição de um dente na arcada dentária — ou tensigridade dentária — devem ser considerados quando se planeja e finaliza um caso na prática clínica ortodôntica. As causas diretas do apinhamento dentário anteroinferior são determinantes para se refletir se a contenção deve ser mesmo indicada e aplicada por toda a vida e se, necessariamente, deve ser usada de forma permanente. Esses aspectos do apinhamento dentário anteroinferior e suas implicações na prática clínica serão aqui abordados para induzir reflexões e insights de novas pesquisas, bem como avanços no conhecimento e tecnologia sobre esse assunto.

Palatal rugae characteristics and its relationship with Angle class 1, 2 & 3 malocclusions / Características de rugas palatinas y su relación con ángulos de maloclusiónes clase 1, 2 & 3

SUMMARY: The objectives of the study were to, 1. Compare the accuracy of four methods of acquisition of palatal rugae (PR) characteristics (PRC). 2. Study the predominant PRC in Angles Class 1, 2, and 3 malocclusions. 3. To statistically correlate the predominant PRC with Class 1, 2 & 3 malocclusions and thus explore the possibility of utilizing it in predicting malocclusions. Study casts and intraoral 3D scan images (3Shape® Intra-Oral Scanner) of the palate of 104 healthy orthodontic patients were included as Group I and Group II respectively. The casts of Group I were scanned using 3Shape® (Group III) and Sirona inEos X5® (Group IV) cast scanners. PRC for all groups were recorded and PRC of Group I was compared with PRC of Groups II, III and IV for possible matching. 3D images of Group IV were further divided according to Angles classification and predominant PRC analyzed. 97.8 % of PRC match was observed in Group I and Group IV. Wavy and complex rugae were predominant in Class 1 and 3 malocclusions and showed statistically significant difference between Class 1, 2 and 3 malocclusions (p=0.00 and 0.014 respectively) with wavy being higher in Class 1 and complex being higher in Class 3 (LSD Post Hoc analysis). Direct intraoral 3D scanning and 3D scanning of the palatal area of casts are equally reliable methods for PR acquisition for examining PRC. All PRC considered together have a minimal impact on prediction of malocclusions, however, influence of wavy characteristic was maximum.

RESUMEN: Los objetivos del estudio fueron los siguientes: 1. Comparar la precisión de cuatro métodos de adquisición de las características de la rugosidad palatina (CRP). 2. Estudiar las CRP predominantes en maloclusiones clases 1, 2 y 3. 3. Correlacionar estadísticamente las CRP predominantes con maloclusiones clase 1, 2 y 3 e investigar la posibilidad de utilizarlas en la predicción de maloclusiones. Se incluyeron en el Grupo I y en el Grupo II, los moldes de estudio y las imágenes de barrido 3D intraoral (3Shape® Intra-Oral Scanner) del paladar de 104 pacientes ortodónticos sanos. Los escaneos del Grupo I se escanearon utilizando escáner fundidos 3Shape® (Grupo III) y Sirona inEos X5® (Grupo IV). CRP para todos los grupos se registraron y CRP del Grupo I se comparó con las CRP de los Grupos II, III y IV para una posible coincidencia. Las imágenes 3D del Grupo IV se dividieron de acuerdo con la clasificación de ángulos y las CRP predominantes analizadas. Se observó un 97,8 % de concordancia en CRP en los grupos I y IV. Las rugas onduladas y complejas predominaron en las maloclusiones de Clases 1 y 3 y mostraron diferencias estadísticamente significativas entre las maloclusiones de Clases 1, 2 y 3 (p = 0,00 y 0,014 respectivamente), siendo el ondulado más alto en la Clase 1 y el complejo en la Clase 3 (LSD Post Hoc). El escaneo 3D intraoral directo y el escaneado 3D del área palatal son métodos igualmente confiables para la adquisición de CRP para el examen de las CRP. Todas las CRP consideradas en conjunto tienen algún grado de impacto en la predicción de las maloclusiones, sin embargo, fue mayor la influencia de la característica ondulada.

Influence of the cranial base flexion on Class I, II and III malocclusions: a systematic review

ABSTRACT Objective: The aim of this study was to perform a systematic review on the morphological characteristics of the skull base (flexion, anterior length and posterior length) and the concomitant development of malocclusions, by comparing differences in dimorphism, ethnicity and age. Methods: The articles were selected by means of electronic search on BBO, MEDLINE and LILACS databases from 1966 to 2016. A qualitative evaluation of the methodologies used on the articles was also performed. Results: Although the literature on this topic is abundant, only 16 articles were selected for the present systematic review. The cranial base angle itself does not seem to play a significant role in the development of malocclusions. In fact, the cranial base angle is relatively stable at the ages of 5 to 15 years. Conclusions: A more obtuse angle at the skull base, in association or not with a greater anterior length of the cranial base, can contribute to the development of Class II division 1 malocclusions. On the other hand, a more acute angle at the skull base can contribute to a more anterior positioning of the mandible and to the development of Class III malocclusions.

RESUMO Objetivo: o objetivo desse estudo foi realizar uma revisão sistemática sobre as características morfológicas da base do crânio (flexão, comprimento anterior e comprimento posterior) e o desenvolvimento concomitante da má oclusão, comparando as diferenças do dimorfismo, etnia e idade. Métodos: os artigos foram selecionados por meio de busca eletrônica nas bases de dados BBO, MEDLINE e LILACS, de 1966 a 2016. Uma avaliação qualitativa da metodologia dos artigos também foi executada. Resultados: ainda que a literatura seja abundante nesse assunto, somente 16 artigos foram selecionados para a presente revisão sistemática. O ângulo da base do crânio, por si só, não parece desempenhar papel significativo no desenvolvimento das más oclusões. De fato, o ângulo da base do crânio é relativamente estável dos 5 aos 15 anos. Conclusões: um ângulo mais obtuso na base do crânio, associado ou não a um comprimento maior, pode contribuir para o desenvolvimento da má oclusão de Classe II, divisão 1. Por outro lado, um ângulo mais agudo na base do crânio pode contribuir para um posicionamento mais anterior da mandíbula e para o desenvolvimento da má oclusão de Classe III.

Incidence of Lower Anterior Third Molars on Dental Crowding. A New Approach / Incidencia de Terceros Molares Inferiores en el Apiñamiento Dental. Un Nuevo Enfoque

ABSTRACT: This paper main objective is to estimate the level of association between lower anterior crowding and the presence of lower third molars on study models and panoramic dental radiographs of patients treated by the Orthodontics Postgraduate Students at the Dentistry Faculty at the University of Cartagena (Cartagena de Indias, Colombia) and also other dental and radiographs care centers in Cartagena de Indias. It was made using a cross-sectional study at the Dentistry Faculty at the University of Cartagena and others dental care centers in the city. There were 366 study models and panoramic dental radiographs selected by strict inclusion/exclusion criteria for patients. An instrument that includes age, gender, presence or absence of third molars, position of third molars according to Winter's classification, stage of formation of the third molars according to Nolla's classification, and crowding magnitude according to Harfin's classification was used. Data were analyzed based on frequency distributions and proportions; inferential analysis was performed through proportional odds model using the software package IBM SPSS Statistics v23. It was found that the patients with Nolla 6 from the right side are more likely to have mild-moderate crowding magnitude than patients with Nolla 10 on that same side. In conclusion, this research provides as main result the implication of the eruption of the lower third molars and particularly those erupting in mesioangular and horizontal positions in the anterior crowding (AA).

RESUMEN: El objetivo de este trabajo fue estimar el nivel de asociación entre el apiñamiento dentario anteroinferior y la presencia de terceros molares inferiores en modelos de estudio y radiografías panorámicas de los pacientes atendidos por estudiantes del posgrado de ortodoncia de laFacultad de Odontología de Cartagena de Indias, Colombia y también otros centros dentales y de radiografías en Cartagena de Indias. Se realizó un estudio transversal en la Facultad de Odontología de la Universidad de Cartagena y otros centros de atención odontológica de la ciudad. Se utilizaron 366 modelos de estudio y radiografías dentales panorámicas seleccionadas por estrictos criterios de inclusión / exclusión para los pacientes. Se utilizó un instrumento que incluía edad, sexo, presencia o ausencia de terceros molares, posición de los terceros molares de acuerdo con la clasificación de Winter, etapa de formación de los terceros molares de acuerdo con la clasificación de Nolla y magnitud de apiñamiento según la clasificación de Harfin. Los datos se analizaron en base a las distribuciones y proporciones de frecuencia; el análisis inferencial se realizó a través del modelo de probabilidades proporcional utilizando el software IBM SPSS Statistics v23. Se encontró que los pacientes con Nolla 6 en el lado derecho son más propensos a tener una magnitud de apiñamiento de leve a moderada en comparación a los pacientes con Nolla 10 en ese mismo lado. En conclusión, esta investigación proporciona como resultado principal la implicación de la erupción de los terceros molares inferiores y particularmente aquellos que erupcionan en posiciones mesioangulares y horizontales en el apiñamiento dentario anterior (AA).

Stature Estimate by the Upper Arch: Carrea´s Method Modified / Estimación de la Estatura por Medio del Arco Superior: Método de Carrea Modificado

The Carrea's index is an alternative to estimate the human stature. However, in cases when the jaw is affected, this technique becomes impracticable. Expanding the use of the Carrea's index, by extending it to the upper elements, would increase the chances of the method, especially in cases when only the skull is available for analysis. The aim of the study was to test a new denominator for Carrea's index, so that it could be used for the upper arch, aiming at a new feature to estimate human stature. Plaster models of the arch and the string of the upper arch of 107 dentistry students, aged between 18 and 30 years, previously submitted to anthropometric analysis, were measured with a digital caliper. The data found were inserted in software developed to find a denominator that would result in a higher number of correct answers to real statures, evaluating the left and the right hemiarch, and their average. For the right hemiarch, the denominator with more accuracy for the real stature was the interval from 2.573 to 2.583, with 58.9 %. For the left hemiarch, the best values were from 2.553 to 2.554 with 63.6 %. The average of hemiarchs had as ideal denominator values between 2.579 and 2.581, with 60.7 %. We found no significant statistical difference between denominators. It was possible to obtain a new denominator to apply Carrea's index for the upper arch. The new method had satisfactory accuracy rate and should be tested in other populations to verify its applicability.

El índice de Carrea constituye una alternativa para la estimación de la estatura humana. Sin embargo, esta técnica se torna inviable cuando la mandíbula se encuentra comprometida. Su aplicación a partir de elementos dentales superiores, resultaría de utilidad en los casos en que sólo se dispusiese del cráneo para examinar. El objetivo del estudio fue proponer un nuevo denominador para que el índice de Carrea pueda ser utilizado para el arco superior, en la búsqueda de otro recurso para estimar la estatura humana. El arco y la cuerda fueron medidos, con un calibre digital, sobre los respectivos modelos de yeso superiores de 107 estudiantes de Odontología, que tenían entre 18 y 30 años de edad y habían sido sometidos a análisis antropométricos previos. Los datos obtenidos fueron analizados matemáticamente mediante un programa desarrollado para encontrar un denominador, que proporcionase un mayor número de aciertos para las estaturas reales, evaluando el hemiarco derecho, izquierdo y la media de los hemiarcos. Para el hemiarco derecho, el denominador más apropiado para la estatura real correspondió al intervalo 2,573-2,583, con 58,9 % de acierto. Para el hemiarco izquierdo, los mejores valores quedaron comprendidos entre 2,553 y 2,554, con 63,6 % de acierto. La media de los hemiarcos determinó guarismos ideales, oscilantes entre 2,579 y 2,581, con 60,7 % de acierto. No hubo diferencia estadísticamente significativa entre los denominadores hallados. Se obtuvo un nuevo denominador, que permitió el empleo del índice de Carrea para el arco superior, con una tasa de acierto satisfactoria. No obstante, este método debe ser probado y validado para otras poblaciones, verificando su aplicabilidad.

Postura craneocervical como factor de riesgo en la maloclusión / Craniocervical posture as a risk factor for malocclusion

Introducción: los trastornos de la postura craneocervical han sido asociados como factores de riesgo de las enfermedades ortopédicas y, a su vez, son considerados afecciones propias, pero no existen suficientes estudios que los relacionen con la maloclusión dental. Objetivo: determinar si los trastornos de la postura craneocervical constituyen un factor de riesgo en la maloclusión de los pacientes atendidos en la Clínica Victoria de Santa Clara en el período comprendido entre octubre de 2012 y febrero de 2013. Métodos: se realizó un estudio observacional descriptivo de corte transversal donde se formaron 2 grupos, uno con pacientes con maloclusión y otro sin maloclusión, cada uno con 90 pacientes. Para determinar la prevalencia de los trastornos de la postura craneocervical, se emplearon la prueba de convergencia ocular, la prueba de rotación de la cabeza y la alteración del plano biclavicular. Resultados: en el grupo con maloclusión prevalecieron las féminas (55,55 por ciento); los principales factores identificados correspondieron a la herencia (85,55 por ciento), hábitos deformantes (63,33 por ciento), pérdida prematura de dientes (43,33 por ciento) y anormalidades de la musculatura bucal (24,44 por ciento). La prevalencia de los trastornos posturales fue del 97,77 por ciento en el grupo con maloclusión contra el 48,88 por ciento del control; tuvo una relación muy altamente significativa con la maloclusión y un odd ratio de 46,00. Conclusiones: existe un predominio del sexo femenino en el grupo de pacientes con maloclusión y una prevalencia del sexo masculino en el grupo control. Los principales factores de riesgo relacionados con la maloclusión de forma muy altamente significativa son los de mayor prevalencia. Hay predominio de los trastornos de la postura craneocervical en el grupo con maloclusión, presentando una relación muy altamente significativa con esta enfermedad, lo cual constituye un factor de riesgo que incrementa 46 veces más el riesgo de padecer de maloclusión(AU)

Introduction: craniocervical posture disorders have been viewed as risk factors for orthopedic conditions and as separate conditions themselves, but there are not sufficient studies relating them to dental malocclusion. Objective: determine whether craniocervical posture disorders constitute a risk factor for malocclusion in patients cared for at Victoria de Santa Clara clinic from October 2012 to February 2013. Methods: an cross-sectional observational descriptive study was conducted for which two groups were formed: one with patients with malocclusion and the other with patients without malocclusion. Each group was composed of 90 patients. Ocular convergence, head rotation, and biclavicular plane alteration tests were used to determine the prevalence of craniocervical posture disorders. Results: female gender prevailed in the malocclusion group (55.55 percent). The main factors identified were inheritance (85.55 percent), deforming habits (63.33 percent), premature tooth loss (43.33 percent) and oral muscle anomalies (24.44 percent). Prevalence of posture disorders was 97.77 percent in the malocclusion group vs. 48.88 percent in the control group, with a highly significant relationship to malocclusion and an odd ratio of 46.00. Conclusions: female gender prevailed in the malocclusion group, whereas male gender predominated in the control group. The most prevalent risk factors are those related to malocclusion in a highly significant manner. A predominance was found of craniocervical posture disorders in the malocclusion group, with a highly significant relationship to malocclusion, a factor increasing 46 times the risk of suffering from the condition(AU)

Occlusal and cephalometric characteristics of anterior open-bite among Colombian 5-10 years old school children / Características oclusales y esqueléticas de mordida abierta anterior en escolares colombianos de 5 a 10 años

Abstract: objetive. The aim of this study was to determine oclussal and skeletal characteristics of anterior open bite (AOB) according to sex and socioeconomic status (SES) in school children in the municipality of Pasto, Colombia. Methodology. A cross-sectional study was carried out involving 384 children between 5 and 10 years of age. A clinical assessment was performed to evaluate AOB, and information regarding socio-demographic variables, such as sex and SES according to Colombian standards, was obtained. Standardized lateral cephalograms and cast models were taken from participating subjects. A statistical analysis was performed using frequencies, percentages, t-student, ANOVA, Mann-Whitney and Kruskal-Wallis tests. Results. Prevalence of AOB was 8.1 percent, showing a significant difference according to SES. The most common Angle’s classification was Class II with 70.6 percent in the right molars, and 58.8 percent in the left molars, according to occlusal characteristics. Statistically significant differences were observed in the ratio of posterior and anterior facial height (PFH:AFH) (p=0.050) according to sex. The distance between the upper first molar and palatal plane (U6-PP) (p=0.028), the Overbite (p=0.032) and Gonial° (p=0.033) values showed statistically significant differences according to SES in vertical skeletal measures. The 64.7 percent of AOB were of dental origin. Conclusion. Results suggest variations in some vertical skeletal measures according to sex and SES in children with AOB. Since a high percentage of AOB is caused by dental factors, preventive programs are required to control this condition.

Resumen: el objetivo de este estudio fue determinar las características oclusales y esqueléticas de mordida abierta anterior (MAA) según sexo y nivel socioeconómico en escolares de Pasto, Colombia. Metodología. Se diseñó un estudio transversal con la participación de 384 niños entre 5 y 10 años. Se realizó una valoración clínica para evaluar la MAA y se obtuvo información sobre variables socio-demográficas como edad, sexo y estrato socioeconómico (ESE) basado en los parámetros de Colombia. A los participantes se les tomó cefalometrías laterales estandarizadas y modelos de estudio de yeso. Se hizo un análisis estadístico usando frecuencias, porcentajes, t-student, ANOVA, Mann- Whitney y Kruskal-Wallis. Resultados. La prevalencia de MAA fue 8,1 por ciento y existió una diferencia significativa según ESE. La clasificación de Angle más común fue la Clase II para el molar derecho en 70,6 por ciento e izquierdo: en 58,8 por ciento de acuerdo a las características oclusales. Diferencias estadísticamente significativas fueron observadas en la razón entre la altura facial posterior y anterior (PFH: AFH) según sexo (p=0,05). Los valores de la distancia entre el primer molar superior y el plano palatino (U6-PP) (p=0,028), el Overbite (p=0,032) y Gonial° (p=0,033) tuvieron una diferencia estadísticamente significativa con respecto al ESE en las medidas esqueléticas verticales. El 64,7 por ciento de MAA fueron de origen dental. Conclusión. Los resultados sugieren variaciones en algunas medidas esqueléticas verticales según sexo y ESE. Debido a que existe un alto porcentaje de MAA dental, se requieren programas preventivos para controlar esta condición.

Occlusal changes secondary to temporomandibular joint conditions: a critical review and implications for clinical practice

ABSTRACT The relationship between Temporomandibular Disorders (TMD) and malocclusion is an extremely critical issue in dentistry. Contrary to the old concept that malocclusion causes TMD, occlusal changes, especially those observed as sudden, may be secondary and reflect joint or muscle disorders due to the obvious connection between these structures and the dental occlusion. Objectives The aim of this article is to present the most commonly occlusal changes secondary to TMD. Methods The clinical presentation of these conditions is discussed. Details regarding diagnosis, treatment, and follow-up of patients presenting TMD prior or during treatment are also presented. Conclusions All plans for irreversible therapy should be preceded by a meticulous analysis of TMD signs and symptoms in such a way that patients are not submitted to irreversible treatment, based on an untrue occlusal relationship, secondary to articular and/or muscular disorders. When present, TMD symptoms must always be controlled to reestablish a “normal” occlusion and allow proper treatment strategy.