Evaluation of Mandibular Lingual and Foramen Location in Class I, Class II, and Class III Patients and its Significance in Sagittal Split Ramus Osteotomy.

The precise location of the mandibular lingual (ML) and foramen (MF) is clinically significant because they are crucial anatomic markers for the inferior alveolar nerve protection in sagittal split ramus osteotomy. To determine the position of the ML and MF among subjects with class I, class II, and class III skeletal patterns to obtain information that could be useful for interventions in mandibular ramus. A retrospective study of 324 mandibular ramus from 162 patients was performed to evaluate the distance from the MF to the occlusal plane (OP) and the distance of the ML to the MF, OP, and the margin of the mandible ramus. The MF was more often located below the OP in class III (55.1%), compared with class I (29.0%) and class II (45.3%) patients (P<0.05). The distance from the ML to the MF in skeletal Class III patients (10.15 ± 1.56 mm) was found to be greater than class I (9.25 ± 1.52 mm) and class II (8.34 ± 1.79 mm) patients (P<0.001). And the distance from the ML to the OP was shown to be longer in class III (9.40 ± 2.53 mm) than in class I (6.85 ± 2.55 mm) and class II (6.99 ± 2.53 mm) patients (P<0.001). Therefore, we believe that a low medial horizontal cut at the height of OP is dangerous for Class III patients. And the safe zone for the high medial horizontal cut over the ML should be determined according to the patient's skeletal patterns.

Assessing position changes of impacted third molars in treatment of class II malocclusion with premolars extraction.

INTRODUCTION: Third molars (M3) remaining impacted in Class II malocclusion characterised with sagittal mandibular deficiency is a high probability. The null hypothesis of this study is that mesioangular M3s changes position through the eruption way in Class II malocclusion treatment requiring moderate anchorage with four first premolars extraction. The aim of this study is to reconsider the decision to surgically extract impacted third molars in four premolars extraction treatment of Class II malocclusion. MATERIAL AND METHODS: The materials consisted of the pre-treatment and post-treatment lateral cephalograms and orthopantomographs of 30 individuals with skeletal and dental Class II malocclusion with a mean chronological age of 13.48 years, who were treated by the same clinician (H.G.) with four first premolar extractions via the straight wire technique at the Ankara University Faculty of Dentistry Department of Orthodontics, Ankara, Turkey. The sagittal position of the upper and lower incisors and molars, M3 position and M3 space were evaluated with the paired-t test; the relationship between the sagittal position of the upper and lower incisors and molars and the change in M3 position were evaluated with correlation analysis.  Results: The study found the retroclination and mesial movement of the upper incisors and molars, and an increase in the M3 space by the fixed orthodontic treatment. An insignificant steepening of both the upper right M3 position and the lower right M3 position was found. A statistically significant increase in the lower right and left side M3 spaces was found. Positive correlations between lower right M3 angulation and the sagittal position of the lower incisors and first molars were found. CONCLUSION: Improvement in the mesioangulation of the M3s and an increase in the M3 space were achieved in this study. Based on the findings, it is useful to review the decision for prophylactic surgical extraction of the M3s before orthodontic treatment in such cases, taking into account the risks of postoperative complications.

Facial asymmetry outcome of orthognathic surgery in mild craniofacial microsomia compared to non-syndromic class II asymmetry.

OBJECTIVES: To compare the facial asymmetry after bimaxillary surgery between mild craniofacial microsomia (CFM) and non-syndromic class II asymmetry. MATERIALS AND METHODS: Cone-beam computed tomography scans of adults with Pruzansky-Kaban types I and IIA CFM (CFM groups, n = 20), non-syndromic skeletal class II asymmetry (Class II group, n = 20), and normal controls (control group, n = 20) were compared. The area asymmetry of lower face and jaw bones was quantified. Landmark-based method was used to evaluate the lower facial asymmetry regarding midline, cants, and contour. RESULTS: There were no significant postoperative differences in the hemi-facial and hemi-jaw area asymmetry between CFM and Class II groups, both of which were significantly larger than the control group. No significant difference was found in the midline deviation and lip and occlusal cants between CFM and Class II groups. The vertical contour asymmetry in CFM group became significantly larger than Class II group. Compared to the control group, the deviation of pronasale, subnasale, and soft-tissue menton, lip and occlusal cants, and sagittal and vertical contour asymmetry in CFM group were significantly larger, as were the deviation of subnasale and soft-tissue menton and vertical contour asymmetry in Class II group. CONCLUSIONS: The vertical contour asymmetry of mild CFM was significantly larger than non-CFM class II after surgery, while the area asymmetry, midline deviation, cants, and sagittal contour asymmetry of lower face showed no significant difference. CLINICAL RELEVANCE: Be aware that correcting vertical asymmetry of contour, lip, and dentition in CFM is still challenging.

How accurate is predicted root movement achieved in four first-premolar extraction cases with Invisalign?

OBJECTIVES: This study aims to compare the achieved and predicted root movements in adults after four first-premolar extractions and Invisalign treatment. MATERIALS AND METHODS: Thirty-three consecutive adults (22 Class I, 9 Cusp-to-cusp Class II and 2 Cusp-to-cusp Class III) from a single clinical division who completed the first series of aligners after premolar extractions were included in this retrospective study. A pretreatment cone-beam computed tomography model was registered onto the pretreatment surface-scanned dental model (SSDM) to locate the pretreatment root apices of the whole dentition. These were copied and transferred to the predicted and achieved post-treatment SSDMs to acquire the locations of the predicted and achieved post-treatment root apices. The differences between predicted and achieved root movements (DPARMs) were tested using the paired t-test or Wilcoxon signed rank test. RESULTS: In the anteroposterior direction, posterior root movements of maxillary and mandibular anterior teeth were poorly achieved (3.24-5.74 mm DPARMs, p < .05). In the vertical direction, roots of maxillary anterior teeth achieved greater intrusion (0.70-0.93 mm DPARMs, p < .05), while those of mandibular incisors achieved less intrusion (0.57-0.65 mm DPARMs, p < .05) than predicted. In the mediolateral direction, lateral incisor roots did not move distally (-0.65 to -0.96 mm DPARMs, p < .05), while those of canines did not move buccally, compared with the prediction (-0.75 mm DPARMs, p < .05). CONCLUSIONS: In the four first-premolar extraction treatments with Invisalign, root movements were not achieved as predicted, particularly for anterior teeth in the anteroposterior direction.

Assessment of nasal respiration and three-dimensional airway volume changes in orthognathic surgery patients.

OBJECTIVES: The aim of this study was to evaluate the effect of maxillary movements in orthognathic surgery on nasal airway volume change and its correlation with airflow and resistance. MATERIALS AND METHODS: This study included 25 patients (8 male, 17 female) with Class II (6 patients) or Class III (19 patients) malocclusion. All patients underwent Le Fort I and bilateral sagittal split ramus osteotomy. Nasal airflow and resistance were measured by using rhinomanometry and acoustic rhinometry pre and six months post-operatively. Nasal volume was measured using computed tomography before surgery and six months after surgery. RESULTS: Nasal volume increased in 10 out of 11 patients with CCW (counterclockwise) rotation and decreased in 1 patient while, nasal volume increased in 5 patients with CW (clockwise) rotation and decreased in 9 patients. Superior nasal airway volume increased significantly, while the effects on nasal flow and resistance were not significant. Additionally, no significant correlation was found between airway volume changes and variations in airflow and resistance. CONCLUSION: CCW rotation in orthognathic surgery patients significantly increased superior nasal airway volume but did not improve nasal airway flow and resistance.

Does mandibular advancement ortho-surgical procedure cause condyle changes? A case-series analysis.

INTRODUCTION: Mandibular advancement surgery corrects bone bases while establishing patients' functional and aesthetic rehabilitation. However, little is known about the results of this procedure in the structures that make up the stomatognathic system, as the condyles. OBJECTIVE: This study aimed to evaluate the structural and positional changes of mandibular condyles in ortho-surgical patients who underwent mandibular advancement surgery. MATERIAL AND METHODS: A prospective investigation was conducted with cone-beam computed tomography images. Using Dolphin Imaging® software, seven ortho-surgical patients with Angle Class II malocclusion and mandibular deficiency were evaluated. The images assessed were obtained at pre-surgical phase and after, at least, 1 year of the procedure. To study the structural and positional changes of condyles, linear and angular measurements were obtained, and the right and left sides of patients were compared. Descriptive statistical analysis was performed and, in order to verify possible significant differences, normality tests (Kolmogorov-Smirnov) were applied, followed by a paired t-test to define significance. RESULTS: For all measures evaluated in this study, no statistically significant differences were found. CONCLUSION: The ortho-surgical procedure performed did not change the structure and position of the condyles of patients who underwent surgical mandibular advancement. Right and left mandibular condyles behaved similarly, suggesting stability and condylar adaptation after surgery.

Combined Periodontal-Orthodontic Treatment with Periodontal Corticotomy Regenerative Surgery in an Adult Patient Suffering from Periodontitis and Skeletal Class II Malocclusion: A Case Report with 5-Year Longitudinal Observation.

A thick periodontal phenotype with thick gingiva and alveolar bone volume is required for safe orthodontic tooth movement and long-term stability. A high incidence of dehiscence and fenestration in the labial aspect of mandibular anterior teeth may limit the correction of deformity and orthodontic treatment, especially when the lower anterior teeth are needed to have a large range of movement. This study reports a combination of periodontal therapy and orthodontic therapy with periodontal corticotomy regenerative surgery (PCRS) in a 25-year-old patient suffering from skeletal Class II malocclusion and periodontitis. The patient received periodontal therapy 5 years ago and commenced orthodontic treatment 4.5 years ago. During the 4 years of follow-up for PCRS, the clinical and radiographic evaluations revealed significant improvements in the periodontal phenotype of the mandibular anterior region. The periodontal phenotypes in the mandibular incisors region were all modified from thin to thick. Supplementing orthodontic treatment with labial PCRS could be a promising treatment strategy to maintain long-term periodontal health in adult patients with alveolar deficiency and thin gingiva tissue.

Orthognathic surgery improves compromised natural head position and pharyngeal airway in patients with Skeletal Class II or III malocclusion.

BACKGROUND: Natural head position (NHP), pharyngeal airway and maxillofacial growth pattern are correlated. The author's previous studies proved that following surgical correction of Skeletal Class II malocclusion, the over-extended NHP returned upright, and the pharyngeal airway space (PAS) dimension expanded. OBJECTIVE: The present study compares the post-operative change in NHP and PAS after orthognathic surgery in Skeletal Class II and III malocclusion patients. METHODS: Patients receiving orthognathic procedures to correct Skeletal Class II or III malocclusions were reviewed in this retrospective study. Pre-operative and 6-week post-operative cone-beam computed tomography datasets were collected. Variables representing the craniofacial pattern, the NHP and the PAS were measured three-dimensionally. Post-operative variables were compared with their pre-operative counterparts using either repeat-measure 2-way analysis of variance or Wilcoxon matched-pairs signed rank test. RESULTS: Thirty cases of Skeletal Class II malocclusion and 13 cases of Skeletal Class III malocclusion were collected. Preoperatively, the inter-group differences were significant in craniofacial pattern (68.14 ± 3.552 degree vs. 79.63 ± 2.497 degree, p < .0001) and the NHP (68.77 ± 11.02 degree vs. 82.83 ± 7.738 degree, p = .0002) while not significant in PAS; after surgery, the intergroup differences in craniofacial pattern and the NHP between groups decreased, and the PAS increased in both groups. CONCLUSION: Orthognathic surgery may improve compromised NHP and increase PAS in Skeletal Class II and III malocclusion patients.

The effect of different hybrid rigid internal fixation techniques on the postoperative stability following a mandibular advancement using a bilateral sagittal split ramus osteotomy: A retrospective three-dimensional comparative study.

OBJECTIVE: To three-dimensionally evaluate post-operative mandibular stability following bilateral sagittal split ramus osteotomies between hybrid and non-hybrid rigid internal fixation techniques. MATERIALS AND METHOD: Seventy adults with skeletal class II deformity who underwent bilateral split sagittal osteotomy with mandibular advancement were included. Patients were divided into four groups based on their fixation techniques: hybrid technique (HT) groups I, II, and IV received a 4-hole 2 mm miniplate with either a bicortical screw (BS), additional 2 mm 4-hole miniplate, or two-hole miniplate, while non-HT group III received a 4-hole 2 mm miniplate with four mini-screws (MS). Measurements were taken pre-operatively (T0), immediately postoperatively (T1), and ≥1 year after surgery (T2) using 3D Slicer software. RESULTS: Age, sex, and follow-up period did not correlate significantly with postoperative relapse or stability. Significant differences were observed in the advancement on the right side between groups II, III, and IV and on the left side between groups I, III, and IV. However, the type of surgical intervention showed no significant effect on postoperative relapse and stability. All groups of fixations showed satisfactory stability with irrelevant relapse (< 2 mm or 2°). CONCLUSION: The study demonstrated satisfactory and comparable stability among different fixation groups on patients undergoing mandibular advancement following bilateral split sagittal osteotomy. The results highlighted the importance of considering the degree of advancement when planning orthognathic surgery and managing postoperative outcomes.

An automated method for assessing condyle head changes in patients with skeletal class II malocclusion based on Cone-beam CT images.

OBJECTIVES: Currently, there is no reliable automated measurement method to study the changes in the condylar process after orthognathic surgery. Therefore, this study proposes an automated method to measure condylar changes in patients with skeletal class II malocclusion following surgical-orthodontic treatment. METHODS: Cone-beam CT (CBCT) scans from 48 patients were segmented using the nnU-Net network for automated maxillary and mandibular delineation. Regions unaffected by orthognathic surgery were selectively cropped. Automated registration yielded condylar displacement and volume calculations, each repeated three times for precision. Logistic regression and linear regression were used to analyse the correlation between condylar position changes at different time points. RESULTS: The Dice score for the automated segmentation of the condyle was 0.971. The intraclass correlation coefficients (ICCs) for all repeated measurements ranged from 0.93 to 1.00. The results of the automated measurement showed that 83.33% of patients exhibited condylar resorption occurring six months or more after surgery. Logistic regression and linear regression indicated a positive correlation between counterclockwise rotation in the pitch plane and condylar resorption (P < .01). And a positive correlation between the rotational angles in both three planes and changes in the condylar volume at six months after surgery (P ≤ .04). CONCLUSIONS: This study's automated method for measuring condylar changes shows excellent repeatability. Skeletal class II malocclusion patients may experience condylar resorption after bimaxillary orthognathic surgery, and this is correlated with counterclockwise rotation in the sagittal plane. ADVANCES IN KNOWLEDGE: This study proposes an innovative multi-step registration method based on CBCT, and establishes an automated approach for quantitatively measuring condyle changes post-orthognathic surgery. This method opens up new possibilities for studying condylar morphology.

Artificial intelligence as a prediction tool for orthognathic surgery assessment.

INTRODUCTION: An ideal orthodontic treatment involves qualitative and quantitative measurements of dental and skeletal components to evaluate patients' discrepancies, such as facial, occlusal, and functional characteristics. Deciding between orthodontics and orthognathic surgery remains challenging, especially in borderline patients. Advances in technology are aiding clinical decisions in orthodontics. The increasing availability of data and the era of big data enable the use of artificial intelligence to guide clinicians' diagnoses. This study aims to test the capacity of different machine learning (ML) models to predict whether orthognathic surgery or orthodontics treatment is required, using soft and hard tissue cephalometric values. METHODS: A total of 920 lateral radiographs from patients previously treated with either conventional orthodontics or in combination with orthognathic surgery were used, comprising n = 558 Class II and n = 362 Class III patients, respectively. Thirty-two measures were obtained from each cephalogram at the initial appointment. The subjects were randomly divided into training (n = 552), validation (n = 183), and test (n = 185) datasets, both as an entire sample and divided into Class II and Class III sub-groups. The extracted data were evaluated using 10 machine learning models and by a four-expert panel consisting of orthodontists (n = 2) and surgeons (n = 2). RESULTS: The combined prediction of 10 models showed top-ranked performance in the testing dataset for accuracy, F1-score, and AUC (entire sample: 0.707, 0.706, 0.791; Class II: 0.759, 0.758, 0.824; Class III: 0.822, 0.807, 0.89). CONCLUSIONS: The proposed combined 10 ML approach model accurately predicted the need for orthognathic surgery, showing better performance in Class III patients.

Do Surgical Intervention Type and Baseline Condylar Position Affect Spatial Dimension Changes of the Temporomandibular Joint in the Surgical Correction of Skeletal Class II Deformities?

BACKGROUND: One of the key features of orthognathic surgery is altering temporomandibular joint (TMJ) condylar positions. PURPOSE: This multivariate study aimed to identify surgical interventions and patient factors significantly associated with changes in TMJ spatial dimensions after the surgical correction of skeletal Class II deformities. STUDY DESIGN, SETTING, SAMPLE: This is a retrospective cohort study including patients who had undergone an isolated bilateral sagittal split ramus osteotomy (BSSO) or a bimaxillary osteotomy (BMO) for mandibular advancement and a control sample of patients treated with the removal of odontogenic cysts in the mandibular posterior region. Excluded were those who presented with specific radiographic signs of TMJ osteoarthrosis, severe facial asymmetry, or deformity secondary to trauma. PREDICTOR/EXPOSURE/INDEPENDENT VARIABLE: The primary predictors were condylar position at baseline (anterior, concentric, and posterior), time points (T0, preoperatively; T1, immediately after surgery; and T2, 1-year follow-up), and surgical intervention type (BSSO, BMO, and control group). MAIN OUTCOME VARIABLES: The primary outcomes were changes in posterior spatial dimension (PSD), superior spatial dimension, and medial spatial dimension assessed by cone-beam computed tomography preoperatively, immediately after surgery, and at 1-year follow-up. COVARIATES: Covariates included sex, age, and amount of mandibular advancement. ANALYSES: Estimations of independent effects of primary predictors on outcome variables were made by applying generalized estimation equation models. The value of statistical significance was P < .05. RESULTS: The study sample included 88 participants. The BSSO samples included 39 patients, and the BMO group included 22 patients; the control group comprised 27 subjects. The average age was 31.2 years; the majority were female (61.4%). Adjusted generalized estimation equation models yielded a significant time interaction between BSSO and spatial dimensions over time (PSD, P < .001). Key predictors of spatial dimension changes were the baseline posterior (PSD, P < .001) and the central condylar position (PSD, P < .001). CONCLUSION AND RELEVANCE: This controlled study, for the first time, provides scientific evidence on the effects of surgical intervention type and baseline condylar position on spatial dimension changes in the TMJ. It shows a more favorable outcome in long-term spatial dimension changes for patients treated by a BMO procedure.

Functional therapy and adenotonsillectomy clinical trial for class II malocclusion (FACT-II): protocol for a randomised controlled trial.

INTRODUCTION: Class II malocclusion with mandibular retrognathia is a common complication of paediatric obstructive sleep apnoea (OSA), often accompanied by transverse maxillary deficiency. In early orthodontic treatment, a twin block (TB) is a regular functional appliance for correcting this malocclusion. For paediatric OSA, the most common risk factor is adenotonsillar hypertrophy (AHT). Untreated AHT may lead to the persistence and worsening of obstructive sleep-disordered breathing traits, including habitual mouth breathing. Additionally, the clockwise mandibular rotation associated with AHT-induced pharyngeal crowding can undermine the effectiveness and stability of TB treatment. Adenotonsillectomy (T&A) is currently the first-line treatment for paediatric OSA. This proposed trial will investigate the impact of T&A surgery timing on the efficacy and stability of TB functional treatment in children with class II mandibular retrognathia and ATH. METHODS AND ANALYSIS: This will be a single-centre, parallel-group, superiority randomised controlled trial with participants randomised to intervention (T&A followed by TB treatment) or control arms (TB treatment followed by T&A) in a 1:1 ratio. A total of 40 patients aged 8-14 years, diagnosed with class II mandibular retrognathia and co-existing ATH-induced OSA, and indicated for both T&A surgery and TB treatment, will be recruited at the School and Hospital of Stomatology, Wuhan University. The primary outcomes will be the changes in the apnoea-hypopnoea index and the point A-nasion-point B angle from baseline to postorthodontic treatment between the two groups. Secondary outcomes will include other dental, skeletal, upper airway and soft tissue changes, as well as subjective sleep-related and oral-related quality of life. Outcome changes within each group and between groups will be analysed. ETHICS AND DISSEMINATION: This study is approved by the Ethics Committee of the School and Hospital of Stomatology, Wuhan University (no. 2022-D07). The research findings will be faithfully disseminated through scientific conferences or published articles. TRIAL REGISTRATION NUMBER: ChiCTR2200061703 (https://www.chictr.org.cn).

The TSAR-osteotomy, a total subapical and ramus osteotomy: A technical note.

There are several treatment options to treat a class II dentofacial deformity with a pronounced chin. A total subapical osteotomy is one of these options. This type of osteotomy was refined to total subapical and ramus (TSAR) osteotomy. In this technical note, a detailed and schematic presentation of the TSAR osteotomy is presented step by step. The surgical approach to the TSAR osteotomy is divided into three parts. The first part consists of the horizontal osteotomy at the level of the ramus, the second part approaches the corticotomy to release and protect the mental nerve and the third part consists of connecting the horizontal ramus osteotomy and the local corticotomy around the mental nerve. In this third part, it is important that the inferior alveolar nerve (IAN) is actively sought and protected.

A 10-year-old boy with class II oligodontia treated with buccal fixed appliances and agenesis space closure of the four second premolars: Case report No. 230075 - Titularisation Collège Européen Orthodontie (CEO), European College of Orthodontics.

The patient presented in this case report is a 10-year-old boy with hyperdivergent skeletal Class II associated with familial genetic agenesis of the second premolars. The treatment plan chosen was to close the spaces of agenesis using a bimaxillary appliance fixed buccally. The advantages and disadvantages of this treatment option were discussed. The result was stable and made it possible to avoid an implant-prosthetic solution, which would undoubtedly have been more restrictive over time.

Maxillary bone healing and CT value after Le Fort I osteotomy using absorbable plate system: A retrospective study.

This study aimed to evaluate maxillary bone healing and computed tomography (CT) values after Le Fort I osteotomy with sagittal split ramus osteotomy in patients with class II and III malocclusion. Four absorbable plates and screws were used to fix the maxillary segments in all patients. For 112 sides (58 patients), the bone defect areas at the anterior and posterior sites between the maxillary segments were measured using 3-dimensional CT views reconstructed over a constant CT value at 1 week and 1 year postoperatively. Subsequently, CT values at the upper, middle, and lower sites around the osteotomy line in the medial, middle, and lateral regions were measured. The bone defect area after 1 year increased at the anterior site in class III and at both the anterior and posterior sites in class II (P < 0.05). This study suggests that the increase in bone defect area was affected by lower CT values at the middle site of the middle and lateral regions in class II, and that bony defects between fragments in the maxilla could partially remain in both classes II and III within 1 year after Le Fort I osteotomy.

Investigation of orthognathic surgery indicators-combination with index of orthognathic functional treatment needs (IOFTN) and maxillofacial morphometric analysis.

PURPOSE: The aim of this retrospective study was to determine orthognathic surgery indicators for Japanese patients with jaw deformities using both Index of Orthognathic Functional Treatment Needs (IOFTN) and maxillofacial morphometric analysis. SUBJECTS AND METHODS: The subjects were 89 patients treated with orthognathic surgery and 92 patients treated with orthodontic treatment alone, and were classified as class I, II, or III according to the ANB angle. Based on the results for IOFTN and the results of cephalometric analysis, the indication criteria for orthognathic surgery were examined. RESULTS: In IOFTN analysis, none of patients in the orthognathic surgery group were classified as category 1 or 2, while 48% of the patients in the orthodontic treatment group were classified as category 4 or 5. The results of the cephalometric analysis of patients in classified categories 4 and 5 showed that the orthognathic surgery group had significantly greater lateral mandibular deviation in Class I cases, significantly more severe degree of mandibular retrusion in Class II cases, and significantly more severe degree of mandibular prognathism in Class III cases. The results of the logistic regression analysis showed that IOFTN was a common variable as an indication criterion for orthognathic surgery, and several different variables were also selected from the cephalometric measurements in each group. CONCLUSION: IOFTN is a highly sensitive and useful indicator as a criterion for orthognathic surgery. However, in the choice of treatment strategy, maxillofacial morphometric analyses and the patient's desired goal are important.

Exploring long-term changes and influencing factors of the upper airway in patients with a skeletal Class II relationship after mandibular advancement with maxillary setback surgery: A comprehensive 2-year follow-up investigation.

INTRODUCTION: The objective of this study was to investigate the 2-year postoperative change and influencing factors of the upper airway after mandibular advancement with maxillary setback surgery for patients with a skeletal Class II relationship. METHODS: Fifty-seven participants who underwent mandibular advancement with maxillary setback surgery were enrolled consecutively. Cone-beam computed tomography was performed preoperatively, 3 months postoperatively (T1), and 2 years (T2) postoperatively. All parameters were measured using Dolphin Imaging software (Dolphin Imaging and Management Solutions, Chatsworth, Calif). RESULTS: The total volume (V), minimum cross-sectional area (CSAmin), and glossopharynx increased significantly in both the short-term (V, 13.33%; CSAmin, 33.03%; glossopharynx, 26.73%) and long-term (V, 10.19%; CSAmin, 23.18%; glossopharynx, 18.27%) after the surgery. Mandibular advancement, mandibular width increase, preoperative CSAmin, and body mass index (BMI) significantly affected 2-year postoperative V increases. Mandibular advancement and BMI significantly affected 2-year postoperative glossopharynx increases. Backward movement of point PNS may lead to a reduction of the nasopharynx; however, downward movement of point PNS, upward movement of point A, and increased maxillary width may compensate for this effect by increasing the likelihood of the nasopharynx opening. Furthermore, mandibular body length at T1 is positively associated with relapse rate ([T2 - T1] / T1) of V and CSAmin. CONCLUSIONS: Mandibular advancement amount, mandibular width increase, preoperative CSAmin, and BMI are the 4 factors for long-term V changes. Patients with a longer mandibular body length might have a lower relapse rate.