Evaluation of the diagnostic ability of the Fränkel manoeuvre to detect the contributing jaw in angle class II division 1 malocclusion.

BACKGROUND: A correct diagnosis of patients with an Angle Class II malocclusion is needed to guide treatment decisions toward the contributing jaw and to achieve better treatment outcomes. The aim of the study is to evaluate the diagnostic potential of the Fränkel manoeuvre (FM) for detecting the components determining sagittal discrepancy in Angle Class II division 1. MATERIALS AND METHODS: Anonymous questionnaires containing photographs were distributed totwo groups: general practitioner (GP) dentists and orthodontists. The level of the patient's profile aesthetics before (T0) and after (T1) the manoeuvre was determined using a 100 mm visual analog scale, and the 'profile improvement' score was defined as T1 minus T0. The diagnostic ability of the FM was calculated by comparison with lateral cephalometry as a reference standard using receiver operating characteristic (ROC) curve analysis. RESULTS: A total of 102 respondents participated in the survey; 40 were orthodontists, and 62 were GP dentists. According to the post-FM images, the "profile improvement" score (T1-T0) was significantly greater in patients with mandibular retrusion than in those with maxillary protrusion (p < 0.05). The predictive power of FM, coinciding with the area under the ROC curve, was 0.62 for GPs and 0.78 for orthodontists. CONCLUSIONS: The FM method is a useful and accurate tool for diagnosing skeletal Angle Class II malocclusion etiology (mandibular retrusion or maxillary protrusion), especially when used by orthodontists.

Retrospective analysis of the upper airway anatomy and Sella turcica morphology across different skeletal malocclusions: a computerized technique.

OBJECTIVE: This study aimed to investigate the normal volumetric space and variations in the measurements of different landmarks in adults with different skeletal relations of the maxilla and the mandible based on CBCT data. The study also analyses these landmarks to locate any correlations. BACKGROUND: Numerous studies in orthodontics have found a relationship between orthodontic treatment and changes in the anatomy and function of the airway. Severe changes in airway morphology can cause breathing difficulties, lower quality of life, and even result in life-threatening conditions such as obstructive sleep apnoea. Consequently, orthodontic diagnosis and treatment planning require a thorough understanding of the airway space and its function. METHODS: The present retrospective study was conducted using CBCT records of 120 adult patients, containing 40 samples of each skeletal class (20 males and 20 females). The boundaries were defined for the 3 major regions: the nasopharynx, the oropharynx, and the hypopharynx. Various measurements were recorded across these regions, as well as selective cephalometric landmarks. The obtained data was used to calculate average and standard deviation, while regression analysis was used to evaluate correlations and t-test was used to test statistical significance of gender differences. RESULTS: The results demonstrate that skeletal Class III individuals exhibit a reduced airway volume in the nasopharynx compared to other groups, whereas skeletal Class II individuals displayed a diminished airway volume in the hypopharynx. A strong correlation was observed for Sella turcica parameters. There were no significant differences in skeletal parameters across genders. Nasopharynx cavity volume demonstrated significant differences between skeletal Class I-Class III as well as between skeletal Class II-Class III. Hypopharynx cavity volume also demonstrated significant differences between skeletal Class I-Class II and between skeletal Class II-Class III. CONCLUSION: The major findings are the presence of a reduced nasopharyngeal volume in skeletal Class III malocclusions while skeletal Class II individuals displayed a diminished hypopharyngeal volume, making these critical areas to consider during the diagnostic and orthodontic treatment planning stages. This study also revealed a consistent correlation between Sella turcica parameters across various facial skeletal profiles, with skeletal Class II patients exhibiting a distinct pattern and skeletal Class I and Class III demonstrating an average relationship.

Lateral cephalometric parameters among Arab skeletal classes II and III patients and applying machine learning models.

BACKGROUND: The World Health Organization considers malocclusion one of the most essential oral health problems. This disease influences various aspects of patients' health and well-being. Therefore, making it easier and more accurate to understand and diagnose patients with skeletal malocclusions is necessary. OBJECTIVES: The main aim of this research was the establishment of machine learning models to correctly classify individual Arab patients, being citizens of Israel, as skeletal class II or III. Secondary outcomes of the study included comparing cephalometric parameters between patients with skeletal class II and III and between age and gender-specific subgroups, an analysis of the correlation of various cephalometric variables, and principal component analysis in skeletal class diagnosis. METHODS: This quantitative, observational study is based on data from the Orthodontic Center, Jatt, Israel. The experimental data consisted of the coded records of 502 Arab patients diagnosed as Class II or III according to the Calculated_ANB. This parameter was defined as the difference between the measured ANB angle and the individualized ANB of Panagiotidis and Witt. In this observational study, we focused on the primary aim, i.e., the establishment of machine learning models for the correct classification of skeletal class II and III in a group of Arab orthodontic patients. For this purpose, various ML models and input data was tested after identifying the most relevant parameters by conducting a principal component analysis. As secondary outcomes this study compared the cephalometric parameters and analyzed their correlations between skeletal class II and III as well as between gender and age specific subgroups. RESULTS: Comparison of the two groups demonstrated significant differences between skeletal class II and class III patients. This was shown for the parameters NL-NSL angle, PFH/AFH ratio, SNA angle, SNB angle, SN-Ba angle. SN-Pg angle, and ML-NSL angle in skeletal class III patients, and for S-N (mm) in skeletal class II patients. In skeletal class II and skeletal class III patients, the results showed that the Calculated_ANB correlated well with many other cephalometric parameters. With the help of the Principal Component Analysis (PCA), it was possible to explain about 71% of the variation between the first two PCs. Finally, applying the stepwise forward Machine Learning models, it could be demonstrated that the model works only with the parameters Wits appraisal and SNB angle was able to predict the allocation of patients to either skeletal class II or III with an accuracy of 0.95, compared to a value of 0.99 when all parameters were used ("general model"). CONCLUSION: There is a significant relationship between many cephalometric parameters within the different groups of gender and age. This study highlights the high accuracy and power of Wits appraisal and the SNB angle in evaluating the classification of orthodontic malocclusion.

Digital analyses of Bolton tooth size ratios and their association to gender, angle class, and other occlusal traits: a study using a partially automated digital 3D model analysis.

BACKGROUND: This study aims to verify Bolton's values for tooth size ratios and to evaluate possible relationships to different occlusal traits using precise digital measurement methods. MATERIALS AND METHODS: Including 1000 consecutively selected patients from three study centres a digital, partially automated model analysis was performed utilizing the software OnyxCeph. The measurements comprised tooth width for calculation of anterior (AR) and overall ratio (OR) as a percentage, arch width, length, perimeter, overjet, overbite, space analysis in millimetre and the assessment of the angle classification. RESULTS: AR and OR were significantly increased compared to Bolton's ratios of 77.2% (AR) and 91.3% (OR). In the gender comparison, male patients showed larger tooth size ratios, especially in the OR. Patients with Angle Class II/1 and II/2 had smaller tooth size ratios than patients with Angle Class III and I. Thus, patients with Angle Class II/1 had the largest tooth diameters in all maxillary teeth and with Angle Class II/2 the smallest tooth sizes in the mandible. The largest tooth widths in the lower jaw were observed in the Angle Class III patient group. Furthermore, a negative correlation from AR/OR to overjet, overbite, and available space in lower jaw as well as a positive correlation to available space in upper jaw was detected. CONCLUSIONS: There is a clear correlation between the tooth size ratios and the present dysgnathia as well as other orthodontically relevant occlusal traits. This prior knowledge about our patients is extremely important to create an individualized treatment plan and enable sufficient occlusion. To achieve a functionally good occlusion with correct overjet and overbite, it is essential that the maxillary and mandibular teeth are proportional in size. Any deviation from the ideal patient in terms of tooth size, number, shape, or arch must be considered in the pre-therapeutic treatment plan in combination with the existing dysgnathia in order to be able to achieve a stable anterior and posterior occlusion with appropriate adjustments to the therapy post-therapeutically.

Network analysis of three-dimensional hard-soft tissue relationships in the lower 1/3 of the face: skeletal Class I-normodivergent malocclusion versus Class II-hyperdivergent malocclusion.

BACKGROUND: The determining effect of facial hard tissues on soft tissue morphology in orthodontic patients has yet to be explained. The aim of this study was to clarify the hard-soft tissue relationships of the lower 1/3 of the face in skeletal Class II-hyperdivergent patients compared with those in Class I-normodivergent patients using network analysis. METHODS: Fifty-two adult patients (42 females, 10 males; age, 26.58 ± 5.80 years) were divided into two groups: Group 1, 25 subjects, skeletal Class I normodivergent pattern with straight profile; Group 2, 27 subjects, skeletal Class II hyperdivergent pattern with convex profile. Pretreatment cone-beam computed tomography and three-dimensional facial scans were taken and superimposed, on which landmarks were identified manually, and their coordinate values were used for network analysis. RESULTS: (1) In sagittal direction, Group 2 correlations were generally weaker than Group 1. In both the vertical and sagittal directions of Group 1, the most influential hard tissue landmarks to soft tissues were located between the level of cemento-enamel junction of upper teeth and root apex of lower teeth. In Group 2, the hard tissue landmarks with the greatest influence in vertical direction were distributed more forward and downward than in Group 1. (2) In Group 1, all the correlations for vertical-hard tissue to sagittal-soft tissue position and sagittal-hard tissue to vertical-soft tissue position were positive. However, Group 2 correlations between vertical-hard tissue and sagittal-soft tissue positions were mostly negative. Between sagittal-hard tissue and vertical-soft tissue positions, Group 2 correlations were negative for mandible, and were positive for maxilla and teeth. CONCLUSION: Compared with Class I normodivergent patients with straight profile, Class II hyperdivergent patients with convex profile had more variations in soft tissue morphology in sagittal direction. In vertical direction, the most relevant hard tissue landmarks on which soft tissue predictions should be based were distributed more forward and downward in Class II hyperdivergent patients with convex profile. Class II hyperdivergent pattern with convex profile was an imbalanced phenotype concerning sagittal and vertical positions of maxillofacial hard and soft tissues.

Credibility of Pont's index in Egyptian population.

BACKGROUND: Many indices have been suggested to help orthodontists in predicting the ideal dental arch width. One of these was Pont's index which was established by Pont. He suggested equations to predict the ideal maxillary dental arch width (interpremolar and intermolar) from the combined mesiodistal width of the maxillary incisors. This study aimed to test the applicability of Pont's index as an orthodontic diagnostic tool in Egyptian population and to compare the results with those obtained from studies of different ethnic subjects. METHODS: This study was performed using dental casts of 184 Egyptian individuals (82 males and 102 females; age range, 19-24 years). The casts were divided into 46 casts with normal occlusion, 46 casts with class I, 46 casts with class II and 46 casts with class III malocclusion, according to Angle's classification. Alginate impressions were taken for all patients and poured immediately using dental plaster. The real models were transformed into digital models using three-dimensional laser scanner to allow digital model analysis. Predicted arch widths were calculated using Pont's equations. The predicted values were compared to the measured values. RESULTS: Intra class correlation coefficient (ICC) (absolute agreement) between measured and predicted arch widths was determined. Poor absolute agreement was found between measured arch width values and the corresponding values calculated according to Pont's index. CONCLUSION: According to the results of this study, Pont's index is not a reliable method for predicting the ideal dental arch widths in Egyptian populations.

Relationship between interincisal angles and TMJ morphology/position and trabecular structure: a retrospective study.

BACKGROUND: TMJ morphology/position and trabecular structure are influenced by various factors. The role of the interincisal angle, an indicator of the anterior occlusal relationship, on TMJ remains unclear. This study aims to investigate the morphology, trabecular bone structure, and position of the condyle, as well as the glenoid fossa's morphology in skeletal class II populations with different interincisal angles. MATERIALS AND METHODS: A total of 150 adult patients with normodivergent facial types and skeletal class II malocclusions were selected and divided into three groups based on their interincisal angles: normal, small, and large angle groups. The indexes of TMJ were measured using cone-beam computed tomography (CBCT) data and analyzed using Dolphin Imaging, Mimics, and ImageJ. RESULTS: The small angle group had the smallest anteroposterior diameter (APD), while the large angle group had a greater mediolateral diameter (MLD). The large angle group exhibited significantly the largest maximum axial area, bone surface area, and bone volume (P < 0.05). Small and large angle groups exhibited greater bone trabeculae (Tb. N) and thinner trabecular thickness (Tb. Th). Compared to the normal angle group, the small angle group exhibited a larger horizontal condylar angle and smaller bilateral condylar angles on the axial plane, while the large angle group showed the opposite trend. Small and large angle groups showed a reduced vertical condyle angle on the coronal plane, with the largest reduction observed in the large angle group (P < 0.05). Small and large angle groups had higher heights of the glenoid fossa (GFH). The large angle group exhibited the greatest GFH and width of the glenoid fossa (GFW) (P < 0.05). CONCLUSION: The large angle group had elongated oval and large condyles, and deeper glenoid fossae, while a flattened-oval and smaller condyle, and wider and shallower glenoid fossae were observed in the small angle group. Small and large interincisal angle affects the structure of condylar trabeculae, resulting in thinner Tb. Th and greater Th. N. In the condylar position, small and large angle groups exhibit condylar rotation in the axial and coronal planes. Therefore, the interincisal angle affects the morphology, position, and trabecular structure of the TMJ. This implies that we must pay attention to the impact of the interincisal angle on TMJ, and it is crucial to restore the normal interincisal angle during orthodontic treatment.

The correlation analysis between incisal guidance angle and occlusal plane angles and temporomandibular joint morphology.

OBJECTIVES: The correlations between the incisal guidance angle (IGA) and occlusal plane angles and temporomandibular joint (TMJ) morphology were investigated in adults with skeletal Class II division II malocclusion. MATERIALS AND METHODS: CBCT images of 37 patients were analyzed. It included 19 cases of skeletal Class II division II malocclusion with low angle (study group) and 18 cases of skeletal Class I average angle (control group). The Invivo Dental 5 software was employed to acquire the data of the incisal guidance angle (IGA), occlusal plane angle (FH-OP), anterior occlusal plane angle (FH-AOP) and the TMJ measurement items. RESULTS: The results of IGA, FH-AOP angle and FH-OP angle showed the study group > the control group (P < 0.05). There were statistically difference in the condylar mediolateral diameters, articular eminence inclination and height, and posterior joint spaces between two groups. No differences were revealed in the condylar anteroposterior diameters, the condylar inclination angle, condylar head width and height, condylar length, glenoid fossa depth and width between two groups. In the study group, IGA showed a moderate correlation with FH-AOP, a weak correlation with FH-OP and condylar mediolateral diameters. Meanwhile, there was a correlation between FH-AOP, FH-OP, and TMJ indicators. CONCLUSIONS: The IGA was not only related to FH-AOP and FH-OP, but also to the condylar mediolateral diameters. In addition, there was a correlation between the occlusal plane angles and TMJ morphology in skeletal Class II division II low angle malocclusion. CLINICAL RELEVANCE: For patients with skeletal Class II division II low angle malocclusion, adjusting the IGA and the occlusal plane angles could improve the esthetic appearance of the anterior teeth, occlusal function, and TMJ morphology.

Prevalence of condylar morphological changes in individuals with class II malocclusion.

This observational, cross-sectional study with retrospective collection was aimed to evaluate the prevalence of morphological changes in mandibular condyles in individuals with class II malocclusion, classified according to different vertical growth patterns (brachyfacial, mesofacial, and dolichofacial), through cone beam computed tomography (CBCT). Seventy CBCT images (140 mandibular condyles) were selected from individuals without orthodontic treatment, of both sexes, aged between 25 and 50 years. No statistically significant differences were found between facial patterns; however, there was a higher relative prevalence of bone changes in dolichofacial individuals with flattening (62%), sclerosis (44%), and subchondral bone cyst (20%). Erosion and osteophytes prevailed in mesofacial (39%), and brachyfacial individuals (32%), respectively. Thus, there was no statistically significant difference in the prevalence of degenerative changes between the vertical skeletal patterns. Flattening was the most prevalent change, whereas subchondral bone cyst was the least prevalent among the three groups studied. The observational design of this study makes it possible to analyze image banks to verify the correlation of morphological changes in the temporomandibular joint in different facial patterns in patients with class II malocclusion. A limitation of the study is that clinical characteristics were not evaluated.

Assessment of nasal respiration and three-dimensional airway volume changes in orthognathic surgery patients.

OBJECTIVES: The aim of this study was to evaluate the effect of maxillary movements in orthognathic surgery on nasal airway volume change and its correlation with airflow and resistance. MATERIALS AND METHODS: This study included 25 patients (8 male, 17 female) with Class II (6 patients) or Class III (19 patients) malocclusion. All patients underwent Le Fort I and bilateral sagittal split ramus osteotomy. Nasal airflow and resistance were measured by using rhinomanometry and acoustic rhinometry pre and six months post-operatively. Nasal volume was measured using computed tomography before surgery and six months after surgery. RESULTS: Nasal volume increased in 10 out of 11 patients with CCW (counterclockwise) rotation and decreased in 1 patient while, nasal volume increased in 5 patients with CW (clockwise) rotation and decreased in 9 patients. Superior nasal airway volume increased significantly, while the effects on nasal flow and resistance were not significant. Additionally, no significant correlation was found between airway volume changes and variations in airflow and resistance. CONCLUSION: CCW rotation in orthognathic surgery patients significantly increased superior nasal airway volume but did not improve nasal airway flow and resistance.

Evaluation of the soft tissue facial profile in different skeletal malocclusions in relation to age.

BACKGROUND: The aim of the study was to assess the thickness of the soft tissue facial profile (STFP) in relation to the skeletal malocclusion, age and gender. METHODS: All patients, aged 7-35 years, who were seeking orthodontic treatment at the Department of Orthodontics, Medical University of Warsaw between 2019 and 22 were included in the study. All patients had lateral head radiographs taken before the treatment. The cephalometric analysis was performed including the STFP analysis. The patients were allocated to one of six groups based on age and skeletal relations (ANB angle). The minimum number of patients in each group was 60 with equal gender distribution. The STFP analysis included ten linear measurements. RESULTS: A total of 300 patients were included in the study and allocated to five groups. Group 6 (growing patients with skeletal Class III malocclusion) was not included in the study as it failed to achieve the assumed group size. There were significant differences in the thickness of the STFP in relation to the skeletal malocclusions. Adults with skeletal Class III malocclusion had significantly thicker subnasal soft tissues compared to patients with skeletal Class I and Class II malocclusions. The thickness of the lower lip in patients with Class II skeletal malocclusion was significantly bigger compared to the other groups. Children and adolescents with Class II malocclusions had thicker lower lip in comparison to the group with Class I malocclusion. The majority of the STFP measurements were significantly smaller in children and adolescents compared to adults. The thickness of the STFP in males was significantly bigger in all age groups compared to females. CONCLUSIONS: The thickness of facial soft tissues depends on the patient's age and gender. The degree of compensation of the skeletal malocclusion in the STFP may be a decisive factor during orthodontic treatment planning regarding a surgical approach or a camouflage treatment of skeletal defects.

Three-dimensional evaluation of mandibular lingula: Comparisons of skeletal angle classifications and growth patterns.

OBJECTIVES: This study aimed to evaluate the position of the mandibular lingula (ML) in adult patients (aged between 18 and 35 years old) with different skeletal and growth patterns using cone-beam computed tomography (CBCT). DESIGN: Cross-sectional. SETTING: Dentistry department of University. SUBJECTS: Subjects comprised CBCT images of 150 adult patients, including 300 rami. METHODS AND MATERIALS: In total, 150 CBCT aged between 18 and 35 were selected and divided into three main groups of 50 samples based on their skeletal relationships (classes I, II and III). Patients were subdivided based on their growth pattern (vertical vs. horizontal), resulting in 25 samples per subgroup. Distances between the mandibular lingula and occlusal plane (ML-OP), sigmoid notch (ML-SN), external oblique ridge (ML-EOR), internal oblique ridge (ML-IOR), posterior border of the ramus (ML-PBR), inferior border of the ramus (ML-IBR), and horizontal and vertical distances to the mandibular foramen (ML-hMF and ML-vMF). One-way ANOVA variance analysis was employed to compare different angle classifications, and Bonferroni analysis was used for multiple comparisons. The Student's t-test was also used to compare growth patterns within each main group and genders within the subgroup. RESULTS: The study revealed statistically significant differences in the position of the mandibular lingula between different angle classifications, growth patterns, and genders. Class II samples showed a more anterior position of the ML, whereas Class III samples displayed a more posterior position of the ML. Patients with horizontal growth patterns and Angle Class III had a more posteriorly positioned ML. Gender differences were observed, particularly in Class I and Class III classifications, suggesting that gender may influence the variability of ML position in these specific classifications. CONCLUSION: The position of the mandibular lingula showed high variability among individuals with different angle classifications, growth patterns and genders.

Temporomandibular joint disc repositioning and occlusal splint for adolescents with skeletal class II malocclusion: a single-center, randomized, open-label trial.

BACKGROUND: Temporomandibular joint (TMJ) disc repositioning through open suturing (OSu) is a new disc repositioning method. Its result for adolescents with condylar resorption and dentofacial deformities combined with and without postoperative occlusal splints (POS) has not been well studied. OBJECTIVE: This study was to evaluate and compare the effects of OSu with and without POS in the treatment of TMJ anterior disc displacement without reduction (ADDwoR) in adolescent skeletal Class II malocclusion. METHODS: A total of 60 adolescents with bilateral ADDwoR were enrolled in this study. They were randomly allocated into two groups: OSu with and without POS. Magnetic resonance imaging (MRI) and lateral cephalometric radiographs were used to measure changes in condylar height and the degree of skeletal Class II malocclusion from before operation and at 12 months postoperatively. Changes in these indicators were compared within and between the two groups. RESULTS: After OSu, both groups exhibited significant improvements in condylar height and occlusion at the end of 12 months follow-up (P < 0.05). The group of OSu with POS had significantly more new bone formation (2.83 ± 0.75 mm vs. 1.42 ± 0.81 mm, P < 0.001) and improvement in dentofacial deformity than the group of OSu only (P < 0.05). The new bone height was significantly correlated with POS (P < 0.001), the changes of SNB (P = 0.018), overjet (P = 0.012), and Wits appraisal (P < 0.001). CONCLUSION: These findings indicated that OSu can effectively stimulate condylar regeneration and improve skeletal Class II malocclusion in adolescents with bilateral ADDwoR. The results are better when combined with POS. TRIAL REGISTRATION: This trial was prospectively registered on the chictr.org.cn registry with ID: ChiCTR1900021821 on 11/03/2019.

Comparison of two different therapeutic approaches for skeletal Class II patients with temporomandibular degenerative joint disease.

OBJECTIVES: To compare two different therapeutic approaches for skeletal Class II patients with temporomandibular degenerative joint disease. MATERIALS AND METHODS: A total of 47 patients were included in this study. Group anterior repositioning splint (ARS) was treated with temporomandibular joint (TMJ) disc surgery followed by an ARS and camouflage orthodontic treatment. Group stabilization splint (SS) was treated with an SS followed by orthodontic treatment combined with orthognathic surgery. Cephalometric analysis of lateral radiographs and measurements of condylar height were evaluated before and after splints. RESULTS: In group ARS, mandibular advancement was observed after treatment in 21 of 24 patients (87.5%). The SNB angle increased by an average of 1.40 ± 1.01°. The ANB angle, overjet, Wits, and convexity decreased. Facial angle and soft tissue N Vert to pogonion increased. Vertically, MP-FH, MP-SN, y-axis, and vertical ratio decreased and ANS-Me/N-Me and S-Go/N-Me increased, suggesting a counterclockwise rotation of the mandible. In group SS, 18 of 23 patients (78.3%) showed a backward change tendency. The SNB angle reduced by 0.90 ± 0.93°. The ANB angle, overjet, Wits, convexity, and y-axis increased. The facial angle and soft tissue N Vert to soft tissue pogonion (ST N Vert to ST pogonion) decreased. Magnetic resonance imaging showed condylar height increased by 1.45 ± 3.05 mm (P = .002) in group ARS. In group SS, condylar height change was not consistent. CONCLUSIONS: TMJ disc surgery followed by ARS promoted condylar bone remodeling and regeneration. The SNB angle increased, and the severity of skeletal Class II was improved. The SS enabled the mandible to withdraw backward and revealed a retrognathic but true mandible position.

2D-3D comparison of the temporomandibular joint in skeletal Class II versus Class I adults: A retrospective study.

OBJECTIVE: To compare the temporomandibular joint (TMJ) morphological characteristics in people with Class II versus Class I sagittal skeletal relationship and to identify other factors that influence the TMJ dimensions. MATERIAL AND METHODS: This cross-sectional and retrospective study evaluated 188 people divided into two groups, 92 cone-beam computed tomographies (CBCTs) and lateral radiographs (LR) of people with Skeletal class II relationship with Class II division 1 malocclusion versus 96 CBCTs and LR of people with Class I skeletal relationship and Class I malocclusion (controls). The CBCTs included people of both sexes, aged between 15 and 65 years old. The 3D Imaging Carestream Software was used to evaluate the condyle height and neck width, mediolateral and anteroposterior condyle dimensions, the shape of the glenoid fossa and condyle in the CBCTs. Likewise, the ANB angle, the Wits appraisal and other measurements were evaluated on LR. Besides, Mann-Whitney U, Chi2 and multiple linear regression tests were performed. The significance level was set at P˂0.05. RESULTS: The mediolateral and anteroposterior condyle dimensions were smaller in class II people (1.82mm and 0.29mm, respectively) than class I people (P<0.05). Likewise, height and neck width of condyle were smaller in class II people (0.73mm and 0.40mm, respectively) than class I people (P<0.05). Multiple linear regression identified mainly the ANB angle as a factor (P<0.05) that influenced the dimensions, decreasing the condyle dimensions in skeletal class II relationship. CONCLUSIONS: People with skeletal class II relationship showed smaller condyle dimension values than class I people. A decrease in the dimensions of the eminence and the condyle could be expected when the ANB angle increases.

Preliminary comparison of three-dimensional reconstructed palatal morphology in subjects with different sagittal and vertical patterns.

BACKGROUND: The aim of this study was to assess the difference of palatal morphology in different vertical patterns between skeletal Class I subjects and skeletal Class II subjects with retrusive mandible. METHODS: Seventy-six skeletal Class II subjects with retrusive mandible (38 females, 38 males) and 85 skeletal Class I subjects (45 females, 40 males) were collected retrospectively and divided into hyperdivergent, normodivergent and hypodivergent groups. CBCT images of these subjects were reoriented by Dolphin 3D Imaging software. Three-dimensional (3D) maxilla was segmented by ProPlan software before using Geomagic Studio software to reconstruct 3D palatal morphology. Deviation patterns on 3D colored map analysis was performed to compare the difference of 3D palatal morphology between different groups. RESULTS: 3D colored map analysis showed that male's palate was higher and wider than that of female in the posterior part, regardless of different sagittal and vertical patterns. In skeletal Class II subjects with retrusive mandible, males with hyperdivergent and normodivergent showed higher and narrower in the posterior part of palate, while females with hyperdivergent and normodivergent had a higher but no obviously narrow palate compared with the hypodivergent subjects. Skeletal Class II subjects with retrusive mandible showed flatter and narrower in the posterior part of palate than that of skeletal Class I subjects. CONCLUSIONS: Sagittal and vertical patterns have great influence on the palatal morphology and as the vertical dimension increased, the palate tended to be higher and narrower.

Esthetic perception of facial profile changes after extraction and nonextraction Class II treatment.

This retrospective study evaluated facial profile pleasantness determined by two protocols of Class II treatment. The sample comprised facial profile silhouettes obtained retrospectively from the pretreatment (T1) and posttreatment (T2) cephalograms of 60 patients (42 males and 18 females) divided into two groups. One group of 30 patients (mean age of 12.84 years) was treated with the extraction of maxillary first premolars (mean treatment time of 2.7 years), and the other group of 30 patients (mean age of 12.81 years) was treated with a mandibular advancement appliance (Forsus) (mean treatment time of 2.49 years). The facial profile silhouettes (T1 and T2) were randomly distributed in an album containing one patient per sheet. The examiners consisted of 60 orthodontists and 60 lay individuals, who analyzed the profiles in regard to facial pleasantness, using the Likert scale. A comparison between stages T1 and T2 of the two treatment protocols and between the examiners was performed by mixed-design analysis of variance at a significance level of 5%. The results demonstrated a significant difference between T1 and T2 (greater scores for T2 compared to T1), and between lay individuals and orthodontists (orthodontists assigned higher scores), but with no significant difference between the treatment protocols. Both protocols produced positive effects on the facial profile esthetics, from the standpoint of lay individuals and orthodontists.

Effects of clear aligner therapy for Class II malocclusion on upper airway morphology and daytime sleepiness in adults: A case series.

INTRODUCTION: To evaluate the effects of clear aligner therapy (CAT) on the upper airway dimensions and on daytime sleepiness in adults with dentoskeletal Class II malocclusion. METHODS: This study was conducted from August 2017 to February 2019. Inclusion criteria were healthy adults≥18years old, Angle Class II division 1 malocclusion, first-molar relationship of end-to-end or greater, overjet<10mm, and presenting for multi-arch comprehensive orthodontic treatment with aligners. Treatment mechanics included mandibular dentoalveolar advancement with Class II elastics without maxillary sequential distalization programmed into aligners. Post-treatment changes in dentoskeletal and upper airway dimensions were assessed using CBCT images. The treatment effect on daytime sleepiness was evaluated using an Epworth Sleepiness Scale (ESS). RESULTS: Eight subjects were included in this pilot study (mean age at treatment initiation=44.6years [SD=15.3]). The mean treatment duration was 12.2months (SD=3.4). No statistically significant treatment changes were observed in upper airway dimensions or dentoskeletal cephalometric analyses. Subjects with excessive daytime sleepiness at pre-treatment reported an improvement post-treatment, but no significant difference in the mean ESS score was found. CONCLUSION: Treatment of Class II division 1 malocclusion in adults by mandibular dentoalveolar advancement using CAT has no statistically significant effects on the airway and dentoskeletal measurements, or daytime sleepiness.

Esthetic perception of facial profile changes after extraction and nonextraction Class II treatment

Abstract This retrospective study evaluated facial profile pleasantness determined by two protocols of Class II treatment. The sample comprised facial profile silhouettes obtained retrospectively from the pretreatment (T1) and posttreatment (T2) cephalograms of 60 patients (42 males and 18 females) divided into two groups. One group of 30 patients (mean age of 12.84 years) was treated with the extraction of maxillary first premolars (mean treatment time of 2.7 years), and the other group of 30 patients (mean age of 12.81 years) was treated with a mandibular advancement appliance (Forsus) (mean treatment time of 2.49 years). The facial profile silhouettes (T1 and T2) were randomly distributed in an album containing one patient per sheet. The examiners consisted of 60 orthodontists and 60 lay individuals, who analyzed the profiles in regard to facial pleasantness, using the Likert scale. A comparison between stages T1 and T2 of the two treatment protocols and between the examiners was performed by mixed-design analysis of variance at a significance level of 5%. The results demonstrated a significant difference between T1 and T2 (greater scores for T2 compared to T1), and between lay individuals and orthodontists (orthodontists assigned higher scores), but with no significant difference between the treatment protocols. Both protocols produced positive effects on the facial profile esthetics, from the standpoint of lay individuals and orthodontists.

Dentoskeletal morphology in adults with Class I, Class II Division 1, or Class II Division 2 malocclusion with increased overbite.

INTRODUCTION: The treatment options for adults with increased overbite are limited to dentoalveolar changes that camouflage the condition. Because of high relapse tendency, defining the problem area is important when creating a treatment plan. This study aimed to evaluate dentoskeletal morphology in skeletal Class I and II anomalies associated with Angle Class I, Class II Division 1 (Class II/1), and Class II Division 2 (Class II/2) malocclusions with increased overbite compared with normal occlusion. METHODS: Pretreatment cephalograms of 306 patients (131 men, 175 women; overall ages 18-45 years) were evaluated. Four groups were constructed. Three groups had increased overbite (>4.5 mm): group 1 (n = 96) skeletal Class I (ANB = 0.5°-4°), group 2 (n = 85) skeletal Class II (ANB >4.5°) with Class II/1; and group 3 (n = 79) skeletal Class II with Class II/2 malocclusion. Group 4 as a control (n = 46) skeletal Class I normal overbite. Dental and skeletal characteristics of the groups were compared by sex. For statistical evaluations, analysis of variance followed by Tukey post hoc, Mann-Whitney U, and Kruskall-Wallis tests were used. Additionally correlation coefficients between overbite and skeletal/dental parameters were calculated. RESULTS: Between sexes, with regard to skeletal parameters, the men had greater values in millimetric measurements, and the women had higher SN/GoGn values. Maxillary/mandibular molar heights and the mandibular incisor heights were higher in men. In group 1, decreased lower anterior facial height (LAFH), retrusive mandibular incisors, and increased interincisal degree were determined. The maxillary molars were intrusive, whereas the vertical position of the mandibular molars and incisors in both jaws were normal. In group 2, retrognathic mandible, increased LAFH and mandibular plane angle, extrusive maxillary/mandibular incisors, protrusive mandibular incisors, and decreased interincisal degree were found. In group 3, decreased LAFH, increased interincisal degree, and retrusive incisors in both jaws were determined. There were significant negative correlations between SN/GoGN, palatal plane, and overbite in group 2 and between ANS-SN and overbite in group 3, and positive correlation between interinsical angle and overbite in all increased overbite groups. CONCLUSIONS: Dental morphology seems to be the main factor of increased overbite. Differences between groups were related primarily to inclinations and vertical positions of the incisors, rather than molar positions.