RESUMEN
Fibrosis-associated fibroblasts have been identified across various fibrotic disorders, but not in the context of biomaterials, fibrotic encapsulation, and the foreign body response. In other fibrotic disorders, a fibroblast subpopulation defined by Thy-1 loss is strongly correlated with fibrosis yet we do not know what promotes Thy-1 loss. We have previously shown that Thy-1 is an integrin regulator enabling normal fibroblast mechanosensing, and here, leveraging nonfibrotic microporous annealed particle (MAP) hydrogels versus classical fibrotic bulk hydrogels, we demonstrate that Thy1-/- mice mount a fibrotic response to MAP gels that includes inflammatory signaling. We found that a distinct and cryptic α-smooth muscle actin-positive Thy-1- fibroblast population emerges in response to interleuklin-1ß (IL-1ß) and tumor necrosis factor-α (TNFα). Furthermore, IL-1ß/TNFα-induced Thy-1- fibroblasts consist of two distinct subpopulations that are strongly proinflammatory. These findings illustrate the emergence of a unique proinflammatory, profibrotic fibroblast subpopulation that is central to fibrotic encapsulation of biomaterials.
Asunto(s)
Materiales Biocompatibles , Fibroblastos , Fibrosis , Hidrogeles , Antígenos Thy-1 , Animales , Ratones , Materiales Biocompatibles/efectos adversos , Materiales Biocompatibles/toxicidad , Fibroblastos/metabolismo , Fibroblastos/efectos de los fármacos , Hidrogeles/química , Interleucina-1beta/metabolismo , Ratones Noqueados , Antígenos Thy-1/metabolismo , Factor de Necrosis Tumoral alfa/metabolismoRESUMEN
Research on biomaterials typically starts with cytocompatibility evaluation, using the ISO 10993-5 standard as a reference that relies on extract tests to determine whether the material is safe (cell metabolic activity should exceed 70 %). However, the generalized approach within the standard may not accurately reflect the material's behavior in direct contact with cells, raising concerns about its effectiveness. Calcium phosphates (CaPs) are a group of materials that, despite being highly biocompatible and promoting bone formation, still exhibit inconsistencies in basic cytotoxicity evaluations. Hence, in order to test the cytocompatibility dependence on different experimental setups and material-cell interactions, we used amorphous calcium phosphate, α-tricalcium phosphate, hydroxyapatite, and octacalcium phosphate (0.1 mg/mL to 5 mg/mL) with core cell lines of bone microenvironment: mesenchymal stem cells, osteoblast-like and endothelial cells. All materials have been characterized for their physicochemical properties before and after cellular contact and once in vitro assays were finalized, groups identified as 'cytotoxic' were further analyzed using a modified Annexin V apoptosis assay to accurately determine cell death. The obtained results showed that indirect contact following ISO standards had no sensitivity of tested cells to the materials, but direct contact tests at physiological concentrations revealed decreased metabolic activity and viability. In summary, our findings offer valuable guidelines for handling biomaterials, especially in powder form, to better evaluate their biological properties and avoid false negatives commonly associated with the traditional standard approach.
Asunto(s)
Materiales Biocompatibles , Fosfatos de Calcio , Durapatita , Ensayo de Materiales , Células Madre Mesenquimatosas , Osteoblastos , Fosfatos de Calcio/química , Materiales Biocompatibles/toxicidad , Materiales Biocompatibles/farmacología , Humanos , Ensayo de Materiales/métodos , Ensayo de Materiales/normas , Células Madre Mesenquimatosas/efectos de los fármacos , Osteoblastos/efectos de los fármacos , Osteoblastos/metabolismo , Supervivencia Celular/efectos de los fármacos , Apoptosis/efectos de los fármacos , Línea Celular , Células Endoteliales/efectos de los fármacos , Células Endoteliales/metabolismo , AnimalesRESUMEN
Due to excellent biocompatibility, bioactivities, and osteoconductivity, hydroxyapatite (HAp) is considered as one of the most suitable biomaterials for numerous biomedical applications. Herein, HAp was fabricated using a bottom-up approach, i.e., a wet chemical method, and its composites with TiC, h-BN, and ZrO2 were fabricated by a solid-state reaction method with enhanced mechanical and biological performances. Structural, surface morphology, and mechanical behavior of the fabricated composites were characterized using various characterization techniques. Furthermore, transmission electron microscopy study revealed a randomly oriented rod-like morphology, with the length and width of these nanorods ranging from 78 to 122 and from 9 to 13 nm. Moreover, the mechanical characterizations of the composite HZBT4 (80HAp-10TiC-5h-BN-5ZrO2) reveal a very high compressive strength (246 MPa), which is comparable to that of the steel (250 MPa), fracture toughness (14.78 MPa m1/2), and Young's modulus (1.02 GPa). In order to check the biocompatibility of the composites, numerous biological tests were also performed on different body organs of healthy adult Sprague-Dawley rats. This study suggests that the composite HZBT4 could not reveal any significant influence on the hematological, serum biochemical, and histopathological parameters. Hence, the fabricated composite can be used for several biological applications, such as bone implants, bone grafting, and bone regeneration.
Asunto(s)
Durapatita , Nanocompuestos , Ratas , Animales , Durapatita/toxicidad , Durapatita/química , Ratas Sprague-Dawley , Materiales Biocompatibles/toxicidad , Huesos , Nanocompuestos/toxicidadRESUMEN
ISO 10993-1:2018 describes evaluating the biocompatibility profile of a medical device from a risk-based approach. This standard details the battery of information that should be considered within the assessment of a device, including raw material composition data, manufacturing processes, and endpoint testing. The ISO 10993/18562 series requires worst-case assumptions and exposure scenarios to be used in the evaluation, which may result in an over-estimation of patient safety risk. Currently, biocompatibility assessments evaluate each data set independently, and the consequence of this individualized assessment of exaggerated inputs is potential false alarms regarding patient safety. To evaluate these safety concerns, the ISO standards indicate that professional judgement should be used to estimate patient risk but does not provide guidance on incorporating a holistic review of the data into the risk assessment. Recalibrating these worst-case data to evaluate them in a weight-of-evidence (WoE) approach may provide a more realistic data set to determine actual patient risk. This proposed WoE framework combines understanding data applicability with a method for gauging the strength of data that can provide additional support for the final safety conclusion. Using a WoE framework will allow risk assessors to contextualize the data and utilize it to comprehensively estimate patient safety.
Asunto(s)
Materiales Biocompatibles , Medición de Riesgo/métodos , Humanos , Materiales Biocompatibles/toxicidad , Ensayo de Materiales/métodos , Ensayo de Materiales/normas , Animales , Seguridad del Paciente , Pruebas de Toxicidad/métodos , Pruebas de Toxicidad/normasRESUMEN
Hydroxyapatite (HA) is a biomaterial widely used in clinical applications and pharmaceuticals. The literature on HA-based materials studies is focused on chemical characterization and biocompatibility. Generally, biocompatibility is analyzed through adhesion, proliferation, and differentiation assays. Fewer studies are looking for genotoxic events. Thus, although HA-based biomaterials are widely used as biomedical devices, there is a lack of literature regarding their genotoxicity. This systematic review was carried out following the PRISMA statement. Specific search strategies were developed and performed in four electronic databases (PubMed, Science Direct, Scopus, and Web of Science). The search used "Hydroxyapatite OR Calcium Hydroxyapatite OR durapatite AND genotoxicity OR genotoxic OR DNA damage" and "Hydroxyapatite OR Calcium Hydroxyapatite OR durapatite AND mutagenicity OR mutagenic OR DNA damage" as keywords and articles published from 2000 to 2022, after removing duplicate studies and apply include and exclusion criteria, 53 articles were identified and submitted to a qualitative descriptive analysis. Most of the assays were in vitro and most of the studies did not show genotoxicity. In fact, a protective effect was observed for hydroxyapatites. Only 20 out of 71 tests performed were positive for genotoxicity. However, no point mutation-related mutagenicity was observed. As the genotoxicity of HA-based biomaterials observed was correlated with its nanostructured forms as needles or rods, it is important to follow their effect in chronic exposure to guarantee safe usage in humans.
Asunto(s)
Materiales Biocompatibles , Durapatita , Humanos , Durapatita/toxicidad , Durapatita/química , Materiales Biocompatibles/toxicidad , Hidroxiapatitas , Daño del ADN , Mutágenos/toxicidadRESUMEN
El presente trabajo muestra la obtención de un material a partir de un polímero sintético (TerP) y otro natural, mediante entrecruzamiento físico y su caracterización fisicoquímica y biológica, con el fin de emplearlos para regeneración de tejido óseo. Las membranas fueron obtenidas por la técnica de evaporación del solvente y caracterizadas por espectroscopia FTIR, ensayos de hinchamiento, medidas de ángulo de contacto y microscopia electrónica de barrido (SEM). Se encontró que la compatibilidad entre los polímeros que la constituyen es estable a pH fisiológico y que, al incorporar mayor cantidad del TerP a la matriz, esta se vuelve más hidrofóbica y porosa. Además, teniendo en cuenta la aplicación prevista para dichos materiales, se realizaron estudios de biocompatibilidad y citotoxicidad con células progenitoras de médula ósea (CPMO) y células RAW264.7, respectivamente. Se evaluó la proliferación celular, la producción y liberación de óxido nítrico (NO) al medio de cultivo durante 24 y 48 horas y la expresión de citoquinas proinflamatorias IL-1ß y TNF-α de las células crecidas sobre los biomateriales variando la cantidad del polímero sintético. Se encontró mayor proliferación celular y menor producción de NO sobre las matrices que contienen menos proporción del TerP, además de poseer una mejor biocompatibilidad. Los resultados de este estudio muestran que el terpolímero obtenido y su combinación con un polímero natural es una estrategia muy interesante para obtener un biomaterial con posibles aplicaciones en medicina regenerativa y que podría extenderse a otros sistemas estructuralmente relacionados. (AU)
In the present work, the preparation of a biomaterial from a synthetic terpolymer (TerP) and a natural polymer, physically crosslinked, is shown. In order to evaluate the new material for bone tissue regeneration, physicochemical and biological characterizations were performed. The membranes were obtained by solvent casting and characterized using FTIR spectroscopy, swelling tests, contact angle measurements, and scanning electron microscopy (SEM). It was found that the compatibility between the polymers is stable at physiological pH and the incorporation of a higher amount of TerP into the matrix increases hydrophobicity and porosity.Furthermore, considering the intended application of these materials, studies of biocompatibility and cytotoxicity were conducted with Bone Marrow Progenitor Cells (BMPCs) and RAW264.7 cells, respectively. Cell proliferation, NO production and release into the culture medium for 24 and 48 hours, and proinflammatory cytokine expression of IL-1ß and TNF-α from cells grown on the biomaterials while varying the amount of the synthetic polymer were evaluated. Greater cell proliferation and lower NO production were found on matrices containing a lower proportion of TerP, in addition to better biocompatibility. The results of this study demonstrate that the obtained terpolymer and its combination with a natural polymer is a highly interesting strategy for biomaterial preparation with potential applications in regenerative medicine. This approach could be extended to other structurally related systems. (AU)
Asunto(s)
Animales , Ratas , Osteogénesis , Polímeros/química , Materiales Biocompatibles/síntesis química , Huesos/química , Regeneración Ósea , Quitosano/química , Polímeros/toxicidad , Materiales Biocompatibles/toxicidad , Ensayo de Materiales , Diferenciación Celular , Cromatografía en Gel , Espectroscopía Infrarroja por Transformada de Fourier , Técnicas de Cultivo de Célula , Resonancia Magnética Nuclear Biomolecular , Quitosano/toxicidadRESUMEN
Organoids provide us an opportunity to understand how diseases affect cellular physiology, human tissues or organs. They are indespensible tools for biomaterial toxicity analysis, drug discovery and regenerative medicine.
Asunto(s)
Materiales Biocompatibles , Organoides , Humanos , Materiales Biocompatibles/toxicidad , Medicina Regenerativa , Descubrimiento de DrogasRESUMEN
Implants and prostheses are widely used to either repair damaged tissues or treat different diseases. Before an implant reaches the market, multiple preclinical and clinical tests must be performed. Along with cytotoxicity or hemocompatibility preclinical tests, genotoxicity is an essential feature to investigate. Indeed, the materials used for implantation should be non-genotoxic, i.e. they should not promote mutations that can potentially lead to tumour formation. However, given the complexity level of genotoxicity tests, such tests are not readily available to biomaterials researchers, which is the reason why this aspect is severely underreported in the literature. To solve this problem, we developed a simplified genotoxicity test that can be further adapted by standard biomaterials laboratories. We started by simplifying the classic Ames test in Petri dishes, after which we developed a miniaturized test in a microfluidic chip, which takes only 24 hours, requiring significantly less material and space. An automatization option with a customized testing chamber architecture and microfluidics-based control system has been designed as well. This optimized microfluidic chip system can significantly improve the availability of genotoxicity tests for biomaterials developers, with the additional benefit of more in-depth observation and quantitative comparison due to the availability of processable image components.
Asunto(s)
Materiales Biocompatibles , Daño del ADN , Materiales Biocompatibles/toxicidad , Pruebas de Mutagenicidad/métodos , Mutación , Medición de RiesgoRESUMEN
Hydroxyapatite (HA) is a biomaterial widely used in biomedical applications. Many studies have shown that ionic substituents can be incorporated into HA to produce a mineral composition more similar to natural bone tissue with more favorable biological characteristics for application in bone regeneration. However, its potentially toxic effects need to be evaluated before full approval for human use. For this purpose, an embryotoxicity test was performed on zebrafish according to OECD guideline 236. Zebrafish embryos were exposed to 1 or 3 microspheres of alginate containing nanoparticles of HA and carbonate (CHA), strontium (SrHA), and zinc-substituted HA (ZnHA) from 4 to 120 h post-fertilization (hpf). Lethality and developmental endpoints were evaluated. In addition, larval behavior at 168 hpf was also analyzed to observe whether biomaterials adversely affect optomotor and avoidance responses (neurotoxicity), as well as the oxidative stress pattern through qPCR. After 120 h exposure to all microspheres with different patterns of crystallinity, porosity, nanoparticle size, surface area, and degradation behavior, there was no mortality rate greater than 20%, indicating the non-embryotoxic character of these biomaterials. All experimental groups showed positive optomotor and avoidance responses, which means that embryo exposure to the tested biomaterials had no neurotoxic effects. Furthermore, larvae exposed to one SrHA microsphere showed a better optomotor response than the control. Furthermore, the biomaterials did not change the pattern of mRNA levels of genes related to oxidative stress even after 120 hpf. The growing number of new HA-based biomaterials produced should be accompanied by increased studies to understand the biosafety of these compounds, especially in alternative models, such as zebrafish embryos. These results reinforce our hypothesis that ion-substituted HA biomaterials do not impose toxicological effects, cause development and neuromotor impairment, or increase oxidative stress in zebrafish embryos being useful for medical devices and in the process of bone regeneration.
Asunto(s)
Nanoestructuras , Contaminantes Químicos del Agua , Animales , Humanos , Pez Cebra/metabolismo , Durapatita/toxicidad , Durapatita/metabolismo , Materiales Biocompatibles/toxicidad , Materiales Biocompatibles/metabolismo , Estrés Oxidativo , Nanoestructuras/toxicidad , Embrión no Mamífero/metabolismo , Larva , Contaminantes Químicos del Agua/toxicidadRESUMEN
Recently, room-temperature liquid metals have attracted increasing attention from researchers owing to their excellent material properties. Systematic interpretation of the potential toxicity issues involved is essential for a wide range of applications, especially in the biomedical and healthcare fields. However, even with the exponential growth of related studies, investigation of the toxicological impact and possible hazards of liquid metals to organisms is still in its infancy. This review aims to provide a comprehensive summary of the current frontier of knowledge on liquid metal toxicology and biocompatibility in different environments. Based on recent studies, this review focuses on Ga and Bi-based in different states. It is necessary to evaluate their toxicity considering the rapid increase in research and utilization of such liquid metal composites. Finally, existing challenges are discussed and suggestions are provided for further investigation of liquid metal toxicology to clarify the toxicological mechanisms and strategies are provided to avoid adverse effects. In addition to resolving the doubts of public concern about the toxicity of liquid metals, this review is expected to promote the healthy and sustainable development of liquid metal-based materials and their use in diverse areas, especially those related to health care.
Asunto(s)
Materiales Biocompatibles , Metales , Metales/toxicidad , Ensayo de Materiales , Materiales Biocompatibles/toxicidadRESUMEN
Oxygen releasing biomaterials can facilitate the survival of living implants by creating environments with a viable oxygen level. Hydrophobic oxygen generating microparticles (HOGMPs) encapsulated calcium peroxide (CPO) have recently been used in tissue engineering to release physiologically relevant amounts of oxygen for several weeks. However, generating oxygen using CPO is mediated via the generation of toxic levels of hydrogen peroxide (H2 O2 ). The incorporation of antioxidants, such as catalases, can potentially reduce H2 O2 levels. However, the formulation in which catalases can most effectively scavenge H2 O2 within oxygen generating biomaterials has remained unexplored. In this study, three distinct catalase incorporation methods are compared based on their ability to decrease H2 O2 levels. Specifically, catalase is incorporated within HOGMPs, or absorbed onto HOGMPs, or freely laden into the hydrogel entrapping HOGMPs and compared with control without catalase. Supplementation of free catalase in an HOGMP-laden hydrogel significantly decreases H2 O2 levels reflecting a higher cellular viability and metabolic activity of all the groups. An HOGMP/catalase-laden hydrogel precursor solution containing cells is used as an oxygenating bioink allowing improved viability of printed constructs under severe hypoxic conditions. The combination of HOGMPs with a catalase-laden hydrogel has the potential to decrease peroxide toxicity of oxygen generating tissues.
Asunto(s)
Materiales Biocompatibles , Bioimpresión , Materiales Biocompatibles/toxicidad , Bioimpresión/métodos , Catalasa , Hidrogeles , Peróxido de Hidrógeno , Oxígeno , Ingeniería de TejidosRESUMEN
Additive Manufacturing (AM) technologies are an effective route to fabricate tailor made scaffolds for tissue engineering (TE) and regenerative medicine, with microstereo-lithography (µSLA) being one of the most promising techniques to produce high quality 3D structures. Here, we report the crosslinking studies of fully biobased unsaturated polyesters (UPs) with 2-hydroxyethyl methacrylate (HEMA) as the unsaturated monomer (UM), using thermal and µSLA crosslinking processes. The resulting resins were fully characterized in terms of their thermal and mechanical properties. Determination of gel content, water contact angle, topography and morphology analysis by atomic force microscopy and scanning electron microscopy were also performed. The results show that the developed UP resins (UPRs) have promising properties for µSLA.In vitrocytotoxicity assays performed with 3T3-L1 cell lines showed that the untreated scaffolds exhibited a maximum cellular viability around 60%, which was attributed to the acidic nature of the UPRs. The treatment of the UPRs and scaffolds with ethanol (EtOH) improved the cellular viability to 100%. The data presented in this manuscript contribute to improve the performance of biobased UPs in AM.
Asunto(s)
Metacrilatos , Estereolitografía , Andamios del Tejido/química , Células 3T3-L1 , Animales , Materiales Biocompatibles/química , Materiales Biocompatibles/toxicidad , Supervivencia Celular/efectos de los fármacos , Reactivos de Enlaces Cruzados , Metacrilatos/química , Metacrilatos/toxicidad , Ratones , Ingeniería de Tejidos/métodosRESUMEN
In the present work, 5 wt% CaB6/hydroxyapatite (HA) bioceramic coatings with different La2O3contents (0-0.6 wt%) have been fabricated by a laser cladding technique on Ti-6Al-4V. The effects of La2O3contents on microstructure and properties of the laser-cladded 5 wt% CaB6/HA coatings have been carefully investigated. The results show that the microstructure is obviously refined, and the structure is relatively uniform after doping 0.2-0.4 wt% La2O3. As the La2O3content increases, the corrosion resistance are found to increase firstly and then gradually decrease. The x-rays diffraction analysis confirms that the amount of HA and TCP (calcium phosphate) in the coating reaches maximum after doping 0.2 wt% La2O3. The La2O3-doped coatings show a significantly higher bone-like apatite precipitation after immersion in simulated body fluid compared with La2O3-free coating. In vitro experiment also shows that 5 wt% CaB6/HA bioceramic coatings with 0.2-0.4 wt% La2O3are more suitable for the attachment and proliferation of MG63 cells, exhibiting superior bioactivity and biocompatibility.
Asunto(s)
Materiales Biocompatibles , Cerámica , Lantano/química , Óxidos/química , Aleaciones/química , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Materiales Biocompatibles/toxicidad , Fosfatos de Calcio/química , Adhesión Celular/efectos de los fármacos , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Cerámica/química , Cerámica/farmacología , Cerámica/toxicidad , Durapatita/química , Humanos , Rayos Láser , Modelos Biológicos , Titanio/químicaRESUMEN
A broad family of two-dimensional (2D) materials - carbides, nitrides, and carbonitrides of early transition metals, called MXenes, became a newcomer in the flatland at the turn of 2010 and 2011 (over ten years ago). Their unique physicochemical properties made them attractive for many applications, highly boosting the development of various fields, including biotechnological. However, MXenes' functional features that impact their bioactivity and toxicity are still not fully well understood. This study discusses the essentials for MXenes's surface modifications toward their application in modern biotechnology and nanomedicine. We survey modification strategies in context of cytotoxicity, biocompatibility, and most prospective applications ready to implement in medical practice. We put the discussion on the material-structure-chemistry-property relationship into perspective and concentrate on overarching challenges regarding incorporating MXenes into nanostructured organic/inorganic bioactive architectures. It is another emerging group of materials that are interesting from the biomedical point of view as well. Finally, we present an influential outlook on the growing demand for future research in this field.
Asunto(s)
Nanopartículas/química , Elementos de Transición/química , Antiinfecciosos/farmacología , Materiales Biocompatibles/química , Materiales Biocompatibles/toxicidad , Supervivencia Celular , Estabilidad de Medicamentos , Humanos , Nanopartículas/toxicidad , Fotoquimioterapia/métodos , Relación Estructura-Actividad , Propiedades de Superficie , Conductividad Térmica , Elementos de Transición/toxicidadRESUMEN
In recent years, nanozymes based on two-dimensional (2D) nanomaterials have been receiving great interest for cancer photothermal therapy. 2D materials decorated with nanoparticles (NPs) on their surface are advantageous over conventional NPs and 2D material based systems because of their ability to synergistically improve the unique properties of both NPs and 2D materials. In this work, we report a nanozyme based on flower-like MoS2nanoflakes (NFs) by decorating their flower petals with NCeO2using polyethylenimine (PEI) as a linker molecule. A detailed investigation on toxicity, biocompatibility and degradation behavior of fabricated nanozymes in wild-typeDrosophila melanogastermodel revealed that there were no significant effects on the larval size, morphology, larval length, breadth and no time delay in changing larvae to the third instar stage at 7-10 d for MoS2NFs before and after NCeO2decoration. The muscle contraction and locomotion behavior of third instar larvae exhibited high distance coverage for NCeO2decorated MoS2NFs when compared to bare MoS2NFs and control groups. Notably, the MoS2and NCeO2-PEI-MoS2NFs treated groups at 100µg ml-1covered a distance of 38.2 mm (19.4% increase when compared with control) and 49.88 mm (no change when compared with control), respectively. High-resolution transmission electron microscopy investigations on the new born fly gut showed that the NCeO2decoration improved the degradation rate of MoS2NFs. Hence, nanozymes reported here have huge potential in various fields ranging from biosensing, cancer therapy and theranostics to tissue engineering and the treatment of Alzheimer's disease and retinal therapy.
Asunto(s)
Materiales Biocompatibles/toxicidad , Cerio/toxicidad , Disulfuros/toxicidad , Molibdeno/toxicidad , Nanoestructuras/toxicidad , Animales , Materiales Biocompatibles/administración & dosificación , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacocinética , Cerio/administración & dosificación , Cerio/química , Cerio/farmacocinética , Disulfuros/administración & dosificación , Disulfuros/química , Disulfuros/farmacocinética , Drosophila melanogaster , Tracto Gastrointestinal/metabolismo , Larva/efectos de los fármacos , Larva/crecimiento & desarrollo , Larva/metabolismo , Locomoción/efectos de los fármacos , Ensayo de Materiales , Tasa de Depuración Metabólica , Molibdeno/administración & dosificación , Molibdeno/química , Molibdeno/farmacocinética , Contracción Muscular/efectos de los fármacos , Nanoestructuras/administración & dosificación , Nanoestructuras/química , Polietileneimina/administración & dosificación , Polietileneimina/química , Polietileneimina/farmacocinética , Polietileneimina/toxicidad , Especies Reactivas de Oxígeno/metabolismoRESUMEN
Two-dimensional nanomaterial Ti3C2Txis a novel biomaterial used for medical apparatus. For its application, biosafety serves as a prerequisite for their usein vivo. So far, no research has systematically reported how Ti3C2Txinteracts with various components in the blood. In this work, we evaluated the hemocompatibility of Ti3C2Txnanosheets which we prepared by HF etching. Effects of the concentration and size of Ti3C2Txon the morphology and hemolysis rate of human red blood cells (RBCs), the structure and conformation of plasma proteins, the complement activation, as well asin vitroblood coagulation were studied. In general, Ti3C2Txtakes on good blood compatibility, but in the case of high concentration (>30 µg ml-1) and 'small size' (about 100 nm), it led to the rupture of RBCs membrane and a higher rate of hemolysis. Meanwhile, platelets and complement were inclined to be activated with the increased concentration, accompanying the changed configuration of plasma proteins dependent on concentration. Surprisingly, the presence of Ti3C2Txdid not significantly disrupt the coagulation.In vitrocell culture, the results prove that when the Ti3C2Txconcentration is as high as 60 µg ml-1and still has good biological safety. By establishing a fuzzy mathematical model, it was proved that the hemocompatibility of Ti3C2Txis more concentration-dependent than size-dependent, and the hemolysis rate is the most sensitive to the size and concentration of the Ti3C2Tx. These findings provide insight into the potential use of Ti3C2Txas biofriendly nanocontainers for biomaterialsin vivo.
Asunto(s)
Materiales Biocompatibles , Eritrocitos/efectos de los fármacos , Hemólisis/efectos de los fármacos , Nanoestructuras , Animales , Materiales Biocompatibles/química , Materiales Biocompatibles/toxicidad , Coagulación Sanguínea/efectos de los fármacos , Proteínas Sanguíneas/química , Proteínas Sanguíneas/efectos de los fármacos , Proteínas Sanguíneas/metabolismo , Línea Celular , Supervivencia Celular/efectos de los fármacos , Eritrocitos/química , Eritrocitos/metabolismo , Humanos , Ensayo de Materiales , Ratones , Nanoestructuras/química , Nanoestructuras/toxicidadRESUMEN
Synthesis of Balangu (Lallemantia royleana) seed mucilage (BSM) solutions combined with polyvinyl alcohol (PVA) was studied for the purpose of producing 3D electrospun cell culture scaffolds. Production of pure BSM nanofibers proved to be difficult, yet integration of PVA contributed to a facile and successful formation of BSM/PVA nanofibers. Different BSM/PVA ratios were fabricated to achieve the desired nanofibrous structure for cell proliferation. It is found that the optimal bead-free ratio of 50/50 with a mean fiber diameter of ≈180 nm presents the most desirable scaffold structure for cell growth. The positive effect of PVA incorporation was approved by analyzing BSM/PVA solutions through physiochemical assays such as electrical conductivity, viscosity and surface tension tests. According to the thermal analysis (TGA/DSC), incorporation of PVA enhanced thermal stability of the samples. Successful fabrication of the nanofibers is verified by FT-IR spectra, where no major chemical interaction between BSM and PVA is detected. The crystallinity of the electrospun nanofibers is investigated by XRD, revealing the nearly amorphous structure of BSM/PVA scaffolds. The MTT assay is employed to verify the biocompatibility of the scaffolds. The cell culture experiment using epithelial Vero cells shows the affinity of the cells to adhere to their nanofibrous substrate and grow to form continuous cell layers after 72 h of incubation.
Asunto(s)
Técnicas Electroquímicas/métodos , Lamiaceae/química , Mucílago de Planta/química , Alcohol Polivinílico/química , Andamios del Tejido/química , Animales , Materiales Biocompatibles/toxicidad , Técnicas de Cultivo de Célula/métodos , Supervivencia Celular/efectos de los fármacos , Chlorocebus aethiops , Ensayo de Materiales , Nanofibras/química , Nanofibras/toxicidad , Semillas/química , Células VeroRESUMEN
The unique physicochemical properties of aerogels have made them an attractive class of materials for biomedical applications such as drug delivery, regenerative medicine, and wound healing. Their low density, high porosity, and ability to regulate the pore structure makes aerogels ideal nano/micro-structures for loading of drugs and active biomolecules. As a result of this, the number of in vitro and in vivo studies on the therapeutic efficacy of these porous materials has increased substantially in recent years and continues to be an area of great interest. However, data about their in vivo performance and safety is limited. Studies have shown that polymer-based, silica-based and some hybrid aerogels are generally regarded as safe but given that studies on the acute, subacute, and chronic toxicity for the majority of aerogel types is missing, more work is still needed. This review presents a comprehensive summary of different biomedical applications of aerogels proposed to date as well as new and innovative applications of aerogels in other areas such as decontamination. We have also reviewed their biological effect on cells and living organisms with a focus on therapeutic efficacy and overall safety (in vivo and in vitro).
Asunto(s)
Materiales Biocompatibles/química , Portadores de Fármacos , Preparaciones Farmacéuticas/química , Animales , Materiales Biocompatibles/toxicidad , Técnicas Biosensibles , Composición de Medicamentos , Geles , Humanos , Preparaciones Farmacéuticas/administración & dosificación , Porosidad , Medicina Regenerativa , Medición de Riesgo , Propiedades de Superficie , Ingeniería de Tejidos , Pruebas de Toxicidad , Cicatrización de Heridas/efectos de los fármacosRESUMEN
There is a requirement of removal and replacement of vitreous for various ophthalmic diseases, e.g. retinopathy and retinal detachment. Clinical tamponades, e.g. silicone oil and fluorinated gases are used but limited due to their toxicity and some complications. A lot of polymer-based materials have been tested and proposed as vitreous substitute, but till date, there is no ideal vitreous substitute available. Thus, it requires to develop an improved vitreous substitute which will be highly suitable for vitreous replacement. We have developed tri-polymer complexin situhydrogels by crosslinking among hyaluronic acid (HA), collagen (Coll) and four-arm-polyethylene glycol (PEG). All the developed hydrogels are biocompatible with NIH 3T3 mouse fibroblast cells, having pH in the range 7-7.44 and refractive index in the range 1.333-1.345. The developed hydrogels are highly transparent, showing transmittance >97%. FTIR study shows that the hydrogel was crosslinked by amide bond formation between HA and PEG, and between Coll and PEG. The rheological study shows that all the developed hydrogels exhibit viscoelastic behavior and all the hydrogels have storage modulus values (>100 pa) which is greater than loss modulus values-indicating sufficient elasticity for vitreous application. The elastic nature of the hydrogel increases with the increase in PEG concentration. The gel is formed in between 2 and 3 min-indicating its applicationin situ. The viscosity of the developed hydrogels shows shear thinning behavior. The pre-gel solution of the hydrogel is injectable through a 22 G needle-indicating its applicationin situthrough vitrectomy surgery. All the hydrogels are hydrophilic and have water content of 96% approximately. Thus, the results show the positive properties for its application as a potential vitreous substitute.