RESUMEN
This study aims to enhance the physical properties and color stability of anthocyanin-based intelligent starch films. Three dual-modified starches, namely crosslinked-oxidized starch (COS), acetylated distarch phosphate (ADSP), and hydroxypropyl distarch phosphate (HDSP), were utilized as film matrices. Aronia melanocarpa anthocyanins were incorporated through three different pre-treatments (free, spray-drying microencapsulation, and freeze-drying microencapsulation) to assess the prepared films' functionality, stability, and applicability. The results indicate that the ADSP film exhibited an approximately two-fold increase in elongation at break (EAB) compared to native starch film. Specifically, the ADSP film's water contact angle (WCA) reached 90°, demonstrating excellent flexibility and hydrophobicity. Scanning electron microscopy (SEM) revealed stronger interactions between anthocyanins and the film matrix after microencapsulation. Furthermore, after 30 days of exposure to 37 °C heat and light radiation, the freeze-dried anthocyanin-based intelligent film (FDA film) exhibited minimal fading, displaying the highest stability among the tested films. Notably, during beef freshness monitoring, the intelligent films underwent significant color changes as the beef deteriorated. In conclusion, the developed FDA film, with its outstanding stability and responsive pH characteristics, holds immense potential as a novel packaging material for food applications.
Asunto(s)
Antocianinas , Photinia , Almidón , Antocianinas/química , Almidón/química , Almidón/análogos & derivados , Photinia/química , Embalaje de Alimentos/métodos , Composición de Medicamentos/métodos , Liofilización , Materiales Inteligentes/química , Concentración de Iones de Hidrógeno , Interacciones Hidrofóbicas e HidrofílicasRESUMEN
The creation of biodegradable and biocompatible shape memory polymers amenable to biofabrication techniques remains a challenge. The ability to create shape-changing biodegradable objects that are triggered at body temperature opens up possibilities in tissue engineering, minimally invasive surgery, and actuating bioimplants. Merging Digital Light Processing (DLP) printing with shape memory polymers brings us closer to new smart biomedical outcomes. Previously, we developed a poly(caprolactone-co-trimethylenecarbonate) urethane acrylate resin for the DLP fabrication of biodegradable 3D objects. In further studies, we observed that some of these resins possessed shape memory properties, triggered by body temperature (37 °C). In this subsequent study, we explored the shape memory properties and tunability of this resin family via changes in copolymer composition, molecular weight, and identity of the acrylate end-capping unit. We found that we could create a library of shape memory resins, amenable to DLP printing, which allowed the creation of shape-actuating structures with some tunability over the speed of shape memory and mechanical properties. We observed that increased mole fraction of caprolactone in the copolymer and increased molecular weight of the polymer led to a decrease in speed of the shape memory switch. Furthermore, we observed a trade-off between the composition and the end-capping moiety on the mechanical properties of the polymers. These polymeric resins were able to be processed into shapes that were able to perform work, including the release of cargo and grabbing/lifting of an object. This platform now provides a way to tune the speed and mechanical properties of a shape memory DLP object created from common and scalable polymerization techniques. This work ultimately provides a new platform to develop customizable and biodegradable devices capable of actuating and delivery devices for numerous biomedical applications.
Asunto(s)
Materiales Biocompatibles , Materiales Biocompatibles/química , Impresión Tridimensional , Ingeniería de Tejidos/métodos , Materiales Inteligentes/química , Poliésteres/químicaRESUMEN
Surface wrinkling provides an approach to modify the surfaces of biomedical devices to better mimic features of the extracellular matrix and guide cell attachment, proliferation, and differentiation. Biopolymer wrinkling on active materials holds promise but is poorly explored. Here we report a mechanically actuated assembly process to generate uniaxial micro-and nanosized silk fibroin (SF) wrinkles on a thermo-responsive shape-memory polymer (SMP) substrate, with wrinkling demonstrated under both dry and hydrated (cell compatible) conditions. By systematically investigating the influence of SMP programmed strain magnitude, film thickness, and aqueous media on wrinkle stability and morphology, we reveal how to control the wrinkle sizes on the micron and sub-micron length scale. Furthermore, as a parameter fundamental to SMPs, we demonstrate that the temperature during the recovery process can also affect the wrinkle characteristics and the secondary structures in the silk network. We find that with increasing SMP programmed strain magnitude, silk wrinkled topographies with increasing wavelengths and amplitudes are achieved. Furthermore, silk wrinkling is found to increase ß-sheet content, with spectroscopic analysis suggesting that the effect may be due primarily to tensile (e.g., Poisson effect and high-curvature wrinkle) loading modes in the SF, despite the compressive bulk deformation (uniaxial contraction) used to produce wrinkles. Silk wrinkles fabricated from sufficiently thick films (roughly 250 nm) persist after 24 h in cell culture medium. Using a fibroblast cell line, analysis of cellular response to the wrinkled topographies reveals high viability and attachment. These findings demonstrate use of wrinkled SF films under physiologically relevant conditions and suggest the potential for biopolymer wrinkles on biomaterials surfaces to find application in cell mechanobiology, wound healing, and tissue engineering.
Asunto(s)
Fibroínas , Fibroínas/química , Animales , Biopolímeros/química , Ratones , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Estructura Secundaria de Proteína , Bombyx/química , Propiedades de Superficie , Seda/química , Fibroblastos/citología , Materiales Inteligentes/químicaRESUMEN
Peripheral nerve injuries (PNIs) caused by mechanical contusion are frequently encountered in clinical practice, using nerve guidance conduits (NGCs) is now a promising therapy. An NGC creates a microenvironment for cell growth and differentiation, thus understanding physical and biochemical cues that can affect nerve-cell fate is a prerequisite for rationally designing NGCs. However, most of the previous works were focused on some static cues, the dynamic nature of the nerve microenvironment has not yet been well captured. Herein, we develop a micropatterned shape-memory polymer as a programmable substrate for providing a dynamic cue for nerve-cell growth. The shape-memory properties enable temporal programming of the substrate, and a dynamic microenvironment is created during standard cell culturing at 37 °C. Unlike most of the biomedical shape-memory polymers that recover rapidly at 37 °C, the proposed substrate shows a slow recovery process lasting 3-4 days and creates a long-term dynamic microenvironment. Results demonstrate that the vertically programmed substrates provide the most suitable dynamic microenvironment for PC12 cells as both the differentiation and maturity are promoted. Overall, this work provides a strategy for creating a long-term dynamic microenvironment for regulating nerve-cell fate and will inspire the rational design of NGCs for the treatment of PNIs.
Asunto(s)
Diferenciación Celular , Células PC12 , Ratas , Animales , Polímeros/química , Proliferación Celular/efectos de los fármacos , Propiedades de Superficie , Microambiente Celular , Neuronas/citología , Materiales Inteligentes/químicaRESUMEN
Introduction: Lumbar interbody fusion is widely employed for both acute and chronic spinal diseases interventions. However, large incision created during interbody cage implantation may adversely impair spinal tissue and influence postoperative recovery. The aim of this study was to design a shape memory interbody fusion device suitable for small incision implantation. Methods: In this study, we designed and fabricated an intervertebral fusion cage that utilizes near-infrared (NIR) light-responsive shape memory characteristics. This cage was composed of bisphenol A diglycidyl ether, polyether amine D-230, decylamine and iron oxide nanoparticles. A self-hardening calcium phosphate-starch cement (CSC) was injected internally through the injection channel of the cage for healing outcome improvement. Results: The size of the interbody cage is reduced from 22 mm to 8.8 mm to minimize the incision size. Subsequent NIR light irradiation prompted a swift recovery of the cage shape within 5 min at the lesion site. The biocompatibility of the shape memory composite was validated through in vitro MC3T3-E1 cell (osteoblast-like cells) adhesion and proliferation assays and subcutaneous implantation experiments in rats. CSC was injected into the cage, and the relevant results revealed that CSC is uniformly dispersed within the internal space, along with the cage compressive strength increasing from 12 to 20 MPa. Conclusion: The results from this study thus demonstrated that this integrated approach of using a minimally invasive NIR shape memory spinal fusion cage with CSC has potential for lumbar interbody fusion.
Asunto(s)
Fusión Vertebral , Fusión Vertebral/instrumentación , Fusión Vertebral/métodos , Animales , Ratones , Ratas , Fosfatos de Calcio/química , Procedimientos Quirúrgicos Mínimamente Invasivos/instrumentación , Procedimientos Quirúrgicos Mínimamente Invasivos/métodos , Vértebras Lumbares/cirugía , Ratas Sprague-Dawley , Masculino , Fuerza Compresiva , Proliferación Celular/efectos de los fármacos , Cementos para Huesos/química , Materiales Inteligentes/química , Adhesión Celular/efectos de los fármacosRESUMEN
The constitutive model and modulus parameter equivalence of shape memory alloy composites (SMAC) serve as the foundation for the structural dynamic modeling of composite materials, which has a direct impact on the dynamic characteristics and modeling accuracy of SMAC. This article proposes a homogenization method for SMA composites considering interfacial phases, models the interface stress transfer of three-phase cylinders physically, and derives the axial and shear stresses of SMA fiber phase, interfacial phase, and matrix phase mathematically. The homogenization method and stress expression were then used to determine the macroscopic effective modulus of SMAC as well as the stress characteristics of the fiber phase and interface phase of SMA. The findings demonstrate the significance of volume fraction and tensile pre-strain in stress transfer between the fiber phase and interface phase at high temperatures. The maximum axial stress in the fiber phase is 705.05 MPa when the SMA is fully austenitic and the pre-strain increases to 5%. At 10% volume fraction of SMA, the fiber phase's maximum axial stress can reach 1000 MPa. Ultimately, an experimental verification of the theoretical calculation method's accuracy for the effective modulus of SMAC lays the groundwork for the dynamic modeling of SMAC structures.
Asunto(s)
Aleaciones , Estrés Mecánico , Resistencia a la Tracción , Aleaciones/química , Ensayo de Materiales/métodos , Módulo de Elasticidad , Materiales Inteligentes/química , Modelos TeóricosRESUMEN
Wound dressings can generally complete hemostasis and provide temporary protection after skin damage. Herein, a MXene-based hydrogel was prepared from MXene, gelatin, poly(ethylene glycol)diacrylate (PEGDA) and N,N'-methylenebis(acrylamide) (HEAA) to prepare wound-dressing hydrogels for skin repair. HEAA and PEGDA crosslink polymerization formed the first layer of the network. Hydrogen bonds between MXene, PHEAA, and gelatin formed the second layer of the network. To make the hydrogel more suitable for skin repair, the mechanical properties of the hybrid hydrogel were adjusted. The MXene-based hydrogel could recover its original shape in 16 s upon immersion in water or for a few minutes under light irradiation. The obtained hydrogel showed good photothermal properties upon light irradiation (808 nm, 1 W cm-2) for 20 s, and its temperature on the surface could reach 86.4 °C. Due to its good photothermal properties, this MXene-based hydrogel was suitable for skin repair.
Asunto(s)
Hidrogeles , Piel , Cicatrización de Heridas , Hidrogeles/química , Cicatrización de Heridas/efectos de los fármacos , Animales , Humanos , Polietilenglicoles/química , Materiales Inteligentes/química , RatonesRESUMEN
Current additive manufacturing technologies wherein as-printed simple two-dimensional (2D) structures morph into complex tissue mimetic three-dimensional (3D) shapes are limited to multi-material hydrogel systems, which necessitates multiple fabrication steps and specific materials. This work utilizes a single shape memory thermoplastic polymer (SMP), PLMC (polylactide-co-trimethylene carbonate), to achieve programmable shape deformation through anisotropic design and infill angles encoded during 3D printing. The shape changes were first computationally predicted through finite element analysis (FEA) simulations and then experimentally validated through quantitative correlation. Rectangular 2D sheets could self-roll into complete hollow tubes of specific diameters (ranging from ≈6 mm to ≈10 mm) and lengths (as long as 40 mm), as quantitatively predicted from FEA simulations within one minute at relatively lower temperatures (≈80 °C). Furthermore, shape memory properties were demonstrated post-shape change to exhibit dual shape morphing at temperatures close to physiological levels. The tubes (retained as the permanent shape) were deformed into flat sheets (temporary shape), seeded with endothelial cells (at T < Tg), and thereafter triggered at ≈37 °C back into tubes (permanent shape), utilizing the shape memory properties to yield bioresorbable tubes with cellularized lumens for potential use as vascular grafts with improved long-term patency. Additionally, out-of-plane bending and twisting deformation were demonstrated in complex structures by careful control of infill angles that can unprecedently expand the scope of cellularized biomimetic 3D shapes. This work demonstrates the potential of the combination of shape morphing and SMP behaviors at physiological temperatures to yield next-generation smart implants with precise control over dimensions for tissue repair and regeneration.
Asunto(s)
Prótesis Vascular , Impresión Tridimensional , Humanos , Polímeros/química , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Análisis de Elementos Finitos , Ingeniería de Tejidos , Células Endoteliales de la Vena Umbilical Humana , Materiales Inteligentes/químicaRESUMEN
Stroke is the second result for death and ischemic stroke constitutes most of all stroke cases. Ischemic stroke takes place when blood clot or embolus blocks cerebral vessel and interrupts blood flow, which often leads to brain damage, permanent disability, or death. There is a 4.5-h (golden hour) treatment window to restore blood flow prior to permanent neurological impairment results. Current stroke treatments consist mechanical system or thrombolytic drug therapy to disrupt or dissolve thrombus. Promising method for stroke treatment is mechanical retrieving of thrombi employing device deployed endovascularly. Advent of smart materials has led to research fabrication of several minimally invasive endovascular devices that take advantage of new materials capabilities. One of these capabilities is shape memory, is capability of material to store temporary form, then activate to primary shape as subjected to stimuli. Shape memory polymers (SMPs) are employed as good materials for thrombectomy device fabrication. Therefore, current review presents thrombectomy device development and fabrication with SMPs. Design, performance, limitations, and in vitro or in vivo clinical results of SMP-based thrombectomy devices are identified. Review also sheds light on SMP's future outlook and recommendations for thrombectomy device application, opening a new era for advanced materials in materials science.
Asunto(s)
Procedimientos Endovasculares , Accidente Cerebrovascular Isquémico , Polímeros , Trombectomía , Humanos , Accidente Cerebrovascular Isquémico/terapia , Polímeros/química , Trombectomía/instrumentación , Procedimientos Endovasculares/instrumentación , Materiales Inteligentes/química , AnimalesRESUMEN
Intelligent materials derived from green and renewable bio-based materials garner widespread attention recently. Herein, shape memory polyurethane composite (PUTA/Fe) with fast response to near-infrared (NIR) light is successfully prepared by introducing Fe3+ into the tannic acid-based polyurethane (PUTA) matrix through coordination between Fe3+ and tannic acid. The results show that the excellent NIR light response ability is due to the even distribution of Fe3+ filler with good photo-thermal conversion ability. With the increase of Fe3+ content, the NIR light response shape recovery rate of PUTA/Fe composite films is significantly improved, and the shape recovery time is reduced from over 60 s to 40 s. In addition, the mechanical properties of PUTA/Fe composite film are also improved. Importantly, owing to the dynamic phenol-carbamate network within the polymer matrix, the PUTA/Fe composite film can reshape its permanent shape through topological rearrangement and show its good NIR light response shape memory performance. Therefore, PUTA/Fe composites with high content of bio-based material (TA content of 15.1-19.4%) demonstrate the shape memory characteristics of fast response to NIR light; so, it will have great potential in the application of new intelligent materials including efficient and environmentally friendly smart photothermal responder.
Asunto(s)
Carbamatos , Rayos Infrarrojos , Hierro , Poliuretanos , Taninos , Taninos/química , Poliuretanos/química , Hierro/química , Carbamatos/química , Fenoles/química , Fenol/química , Materiales Inteligentes/química , PolifenolesRESUMEN
Bio-based shape memory materials have attracted wide attention due to their biocompatibility, degradability and safety. However, designing and manufacturing wearable bio-based shape memory films with excellent flexibility and toughness is still a challenge. In this work, silk fibroin substrate with a ß-sheet structure was combined with a tri-block shape memory copolymer to prepare a transparent composited shape memory film. The silk fibroin-based film showed a dual-responsive shape memory function, which can respond to both temperature and water stimuli. This film has a sensitive water-responsive shape memory, which starts deforming after exposure to water for 3 s and fully recovers in 30 s. In addition, the composite film shows highly stretchable (>300 %) and could maintain its high tensile properties after 5 cycles of regeneration. The films also exhibited rapid degradation ability. This study provides new insights for the design of dual-responsive shape memory materials by combining biocompatible matrix and multi-block SMP to simultaneously enhance the mechanical properties, which can be used for intelligent packaging, medical supplies, soft actuators and wearable devices.
Asunto(s)
Materiales Biocompatibles , Fibroínas , Fibroínas/química , Materiales Biocompatibles/química , Materiales Inteligentes/química , Resistencia a la Tracción , Temperatura , Agua/química , Bombyx/químicaRESUMEN
4D (bio-)printing endows 3D printed (bio-)materials with multiple functionalities and dynamic properties. 4D printed materials have been recently used in biomedical engineering for the design and fabrication of biomedical devices, such as stents, occluders, microneedles, smart 3D-cell engineered microenvironments, drug delivery systems, wound closures, and implantable medical devices. However, the success of 4D printing relies on the rational design of 4D printed objects, the selection of smart materials, and the availability of appropriate types of external (multi-)stimuli. Here, this work first highlights the different types of smart materials, external stimuli, and design strategies used in 4D (bio-)printing. Then, it presents a critical review of the biomedical applications of 4D printing and discusses the future directions of biomedical research in this exciting area, including in vivo tissue regeneration studies, the implementation of multiple materials with reversible shape memory behaviors, the creation of fast shape-transformation responses, the ability to operate at the microscale, untethered activation and control, and the application of (machine learning-based) modeling approaches to predict the structure-property and design-shape transformation relationships of 4D (bio)printed constructs.
Asunto(s)
Impresión Tridimensional , Humanos , Materiales Biocompatibles/química , Animales , Bioimpresión/métodos , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Materiales Inteligentes/químicaRESUMEN
Textile sensors transform our everyday clothing into a means to track movement and biosignals in a completely unobtrusive way. One major hindrance to the adoption of "smart" clothing is the difficulty encountered with connections and space when scaling up the number of sensors. There is a lack of research addressing a key limitation in wearable electronics: Connections between rigid and textile elements are often unreliable, and they require interfacing sensors in a way incompatible with textile mass production methods. We introduce a prototype garment, compact readout circuit, and algorithm to measure localized strain along multiple regions of a fiber. We use a helical auxetic yarn sensor with tunable sensitivity along its length to selectively respond to strain signals. We demonstrate distributed sensing in clothing, monitoring arm joint angles from a single continuous fiber. Compared to optical motion capture, we achieve around five degrees error in reconstructing shoulder, elbow, and wrist joint angles.
Asunto(s)
Materiales Inteligentes , Textiles , Movimiento , Programas Informáticos , AlgoritmosRESUMEN
This study aimed to encapsulate Malva sylvestris extract (MSE) into chitosan-carrageenan (CH-KC) fibers using the electrospinning technique and monitor the freshness of silver carp fillets during the refrigerated storage conditions for 8 days. The CH-KC + MSE 4 % fiber mats were red at pH values lower than 3, purple at pH 4-6, dark blue at pH 7, green at pH 8-10, and brown at pH 11-12. The tensile strength, elongation at break, water vapor permeability, oxygen transmission rate, moisture content, and water solubility of fabricated fiber mats were 7.71-11.02 MPa, 13.12 %-30.00 %, 7.35-20.01 × 10-4 g mm/m2 h Pa, 3.81-8.23 cm3/m2 h, 15.74 %-27.34 %, and 3.90 %-7.56 %, respectively. Regarding the potential application of a fabricated indicator for freshness monitoring of silver carp fillets, total viable count, psychrotrophic bacterial count, pH, and total volatile basic nitrogen reached 8.91 log CFU/g, 8.03 log CFU/g, 8.10, and 40.18 mg N/100 g at the end of the study, respectively. Meanwhile, the CH-KC + MSE 4 % fiber mat color changed from white to green. These findings suggest that CH-KC + MSE 4 % fiber mats can be further utilized in the food industry to control the freshness of refrigerated silver carp fillets.
Asunto(s)
Antocianinas , Carragenina , Quitosano , Embalaje de Alimentos , Malva , Embalaje de Alimentos/métodos , Carragenina/química , Quitosano/química , Antocianinas/química , Malva/química , Permeabilidad , Concentración de Iones de Hidrógeno , Carpas , Resistencia a la Tracción , Animales , Solubilidad , Fenómenos Mecánicos , Materiales Inteligentes/químicaRESUMEN
Near-infrared (NIR)-triggered shape memory hydrogels with promising mechanical strength hold immense potential in the field of biomedical applications and soft actuators. However, the optical and mechanical properties of currently reported hydrogels usually suffer from limited solubility and dispersion of commonly used photothermal additives in hydrogels, thus restricting their practical implementations. Here,, a set of NIR-responsive shape memory hydrogels synthesized by polyaddition of diisocyanate-terminated poly(ethylene glycol), imidazolidinyl urea (IU), and p-benzoquinone dioxime (BQDO) is reported. The introduction of IU, a hydrogen bond reinforcing factor, significantly enhances the mechanical properties of the hydrogels, allowing for their tunable ranges of the ultimate tensile strength (0.4-2.5 MPa), elongation at break (210-450%), and Young's modulus (190-850 kPa). The unique hydrogels exhibit an intrinsic photothermal effect because of the covalently incorporated photothermal moiety (BQDO), and the photothermal supramolecular hydrogel shows controllable shape memory capabilities characterized by rapid recovery speed and high recovery ratio (>90%). This design provides new possibilities for applying shape memory hydrogels in the field of soft actuators.
Asunto(s)
Hidrogeles , Rayos Infrarrojos , Hidrogeles/química , Hidrogeles/síntesis química , Polietilenglicoles/química , Estructura Molecular , Resistencia a la Tracción , Urea/química , Sustancias Macromoleculares/química , Sustancias Macromoleculares/síntesis química , Materiales Inteligentes/químicaRESUMEN
This work presents a new method for 4D fabrication of two-way shape memory materials that are capable of reversible shapeshifting right after manufacturing, upon application of proper heating and cooling cycles. The innovative solution presented here consists in the combination of highly stretched electrospun shape memory polymer (SMP) nanofibers with a melt electrowritten elastomer. More specifically, the stretched nanofibers are made of a biocompatible thermoplastic polyurethane (TPU) with crystallizable soft segments, undergoing melt-induced contraction and crystallization-induced elongation upon heating and cooling, respectively. Reversible actuation during crystallization becomes possible due to the elastic recovery of the elastomer component, obtained by melt electrowriting of a commercial TPU filament. Thanks to the design freedom offered by additive manufacturing, the elastomer structure also has the role of guiding the shape transformation. Electrospinning and melt electrowriting process parameters are set up so to obtain smart 4D objects capable of two-way shape memory effect (SME), and the possibility of reversible and repeatable actuation is demonstrated. The two components are then combined in different proportions with the aim of tailoring the two-way SME, taking into account the effect of design parameters such as the SMP content, the elastomer pattern, and the composite thickness.
Asunto(s)
Nanofibras , Polímeros , Polímeros/química , Nanofibras/química , Poliuretanos/química , Elastómeros/química , Materiales Inteligentes/química , Materiales Biocompatibles/químicaRESUMEN
Isoniazid (INH) is crucial in the treatment of tuberculosis; however, its overuse may induce significant gastrointestinal and hepatic side effects. On October 27, 2017, the International Agency for Research on Cancer, under the auspices of the World Health Organization, published a list of carcinogens for preliminary collation and reference. Isoniazid was categorized as a Group 3 carcinogen. The efficient detection of INH poses an important and challenging task. In this study, a "synergistic effect" is incorporated into the pillar (Yamagishi and Ogoshi, 2018) [5] arene-based macrocyclic host (DPA) by strategically attaching bis-p-hydroxybenzoic acid groups to the opposite ends of the pillar (Yamagishi and Ogoshi, 2018) [5] arene. This combination endows DPA with a reversible and selective fluorescence response to isoniazid. Additionally, DPA exhibits excellent analytical capabilities for isoniazid, including speed and selectivity, with a detection limit as low as 4.85 nM. Concurrently, DPA can self-assemble into a microsphere structure, which is convertible into micrometer-sized tubular structures through host-guest interactions with isoniazid. The introduction of a competitive guest, trimethylamine, enables the reversion to its microsphere structure. Consequently, this study presents an innovative and straightforward synthetic approach for smart materials that facilitates the reversible morphological transition between microspheres and microtubes in response to external chemical stimuli. This discovery provides a valuable strategy for designing "synergistic effects" in constructing trace-level isoniazid-responsive interfaces, with potential applications across various fields, such as controlled drug delivery.
Asunto(s)
Materiales Inteligentes , Isoniazida , Sistemas de Liberación de Medicamentos , MicroesferasRESUMEN
Insufficient healing of aneurysms following treatment with vascular occlusion devices put patients at severe risk of fatal rupture. Therefore, promoting healing and not just occlusion is vital to enhance aneurysm healing. Following occlusion device implantation, healing is primarily orchestrated by macrophage immune cells, ending with fibroblasts depositing collagen to stabilize the aneurysm neck and dome, preventing rupture. Several modified occlusion devices are available currently on-market. Previous in vivo work demonstrated that modifications of occlusion devices with a shape memory polymer foam had enhanced aneurysm healing outcomes. To better understand cellular response to occlusion devices and improve aneurysm occlusion device design variables, we developed an in vitro assay to isolate prominent interactions between devices and key healing players: macrophages and fibroblasts. We used THP-1 monocyte derived macrophages and human dermal fibroblasts in our cell culture models. Macrophages were allowed device contact with on-market competitor aneurysm occlusion devices for up to 96 h, to allow for any spontaneous device-driven macrophage activation. Macrophage secreted factors were captured in the culture media, in response to device-specific activation. Fibroblasts were then exposed to device-conditioned macrophage media (with secreted factors alone), to determine if there were any device-induced changes in collagen secretion. Our in vitro studies were designed to test the direct effect of devices on macrophage activation, and the indirect effect of devices on collagen secretion by fibroblasts to promote aneurysm healing and stabilization. Over 96 h, macrophages displayed significant migration toward and interaction with all tested devices. As compared to other devices, shape memory polymer foams (SMM, Shape Memory Medical) induced significant changes in gene expression indicating a shift toward an anti-inflammatory pro-healing M2-like phenotype. Similarly, macrophages in contact with SMM devices secreted more vascular endothelial growth factor (VEGF) compared with other devices. Macrophage conditioned media from SMM-contacted macrophages actively promoted fibroblast secretion of collagen, comparable to amounts observed with exogenous stimulation via VEGF supplementation. Our data indicate that SMM devices may promote good aneurysm healing outcomes, because collagen production is an essential step to ultimately stabilize an aneurysm.
Asunto(s)
Aneurisma , Materiales Inteligentes , Humanos , Factor A de Crecimiento Endotelial Vascular/metabolismo , Macrófagos/metabolismo , Aneurisma/terapia , Colágeno/metabolismo , Medios de Cultivo Condicionados/metabolismo , Medios de Cultivo Condicionados/farmacología , Materiales Inteligentes/metabolismo , FibroblastosRESUMEN
This study focused on the preparation, functionality, and application of smart food packaging films based on polyvinyl alcohol (PVA) and anthocyanins (ACNs) -loaded sodium alginate-chitosan quaternary ammonium salt (HACC-SA) nanocomplexes. The average encapsulation rate of anthocyanins-loaded nanocomplexes reached 62.51 %, which improved the hydrophobicity and water vapor barrier of the PVA film. FTIR confirmed that the nanocomplexes were immobilized in the PVA film matrix by hydrogen bonding, which improved the mechanical properties of the film. The SEM and XRD results demonstrated that the HACC-SA-ACNs nanocomplexes were uniformly distributed in the film matrix and the crystallinity of PVA was decreased. The P/HACC-SA-ACNs film showed a significant response to buffers of pH 2-13 and high color stability after 21 days of storage compared to the P/ACNs film. Furthermore, the color of the composite film changed from purple to red as the milk freshness decreased during 72 h of milk freshness monitoring, indicating that the P/HACC-SA-ACNs films were suitable and promising for application as smart packaging materials.
Asunto(s)
Quitosano , Materiales Inteligentes , Animales , Antocianinas , Leche , Embalaje de Alimentos , Alginatos , Alcohol Polivinílico , Compuestos de Amonio Cuaternario , Concentración de Iones de HidrógenoRESUMEN
Conductive hydrogels, especially polysaccharide-based ionic conductive hydrogels, have received increasing interest in the field of wearable sensors due to their similarity to human skin. Nevertheless, it is still a challenging task to simultaneously prepare a self-healed and adhesive conductive hydrogel with good toughness, temperature tolerance and high sensing performance, especially with high sensitivity and a low detection limit. Herein, we developed a new strategy to improve the toughness and sensing performance of a multifunctional conductive hydrogel by simultaneously using dissolved chitosan (CS) and solid chitosan nanofibers (CSFs) to induce the formation of hierarchical polymeric networks in the hydrogel. The tensile strength and elongation at break of the hydrogel could be improved from 70.3 kPa and 1005 % to 173.9 kPa and 1477 %, respectively, simply by introducing CSFs to the hydrogel, and its self-healing, adhesive and antibacterial properties were effectively retained. When serving as a resistive sensing material, the introduction of CSFs increased the gauge factor of the hydrogel-based strain sensor from 8.25 to 14.27. Moreover, the hydrogel-based strain sensor showed an ultralow detection limit of 0.2 %, excellent durability and stability (1000 cycles) and could be used to detect various human activities. In addition, the hydrogel prepared by using a water-glycerol binary solvent system showed temperature-tolerant performance and possessed adequate sensitivity when serving as a resistive sensing material. Therefore, this work provides a new way to prepare multifunctional conductive hydrogels with good toughness, sensing performance and temperature tolerance to expand the application range of hydrogel-based strain sensors.