Level of BPA contamination in resin composites determines BPA release.

OBJECTIVES: Resin composites may release bisphenol A (BPA) due to impurities present in the monomers. However, there is a lack of knowledge regarding the leaching characteristics of BPA from resin composites. Therefore, experimental resin composites were prepared with known amounts of BPA. The objective of this study was (1) to determine which amount of BPA initially present in the material leaches out in the short term and, (2) how this release is influenced by the resin composition. METHODS: BPA (0, 0.001, 0.01, or 0.1 wt%) was added to experimental resin composites containing 60 mol% BisGMA, BisEMA(3), or UDMA, respectively, as base monomer and 40 mol% TEGDMA as diluent monomer. Polymerized samples (n = 5) were immersed at 37 °C for 7 days in 1 mL of water, which was collected and refreshed daily. BPA release was quantified with UPLC-MS/MS after derivatization with pyridine-3-sulfonyl chloride. RESULTS: Between 0.47 to 0.67 mol% of the originally added BPA eluted from the resin composites after 7 days. Similar elution trends were observed irrespective of the base monomer. Two-way ANOVA showed a significant effect of the base monomer on BPA release, but the differences were small and not consistent. SIGNIFICANCE: The released amount of BPA was directly proportional to the quantity of BPA present in the resin composite as an impurity. BPA release was mainly diffusion-based, while polymer composition seemed to play a minor role. Our results underscore the importance for manufacturers only to use monomers of the highest purity in dental resin composites to avoid unnecessary BPA exposure in patients.

Raman silent region - based method for detection of pesticides with cyano group.

Based on the fact that not all chemical substances possess good Raman signals, this article focuses on the Raman silent region signals of pesticides with cyano group. Under the optimized conditions of methanol-water (1:1, v/v) as the solvent, irradiation at 302 nm light source for 20 min, and the use of 0.5 mol/L KI as the aggregating agent, Surface-enhanced Raman spectroscopy (SERS) method for azoxystrobin detection was developed by the Raman silent region signal of 2230 cm-1, and verified by detecting the spiked grapes with different concentrations of azoxystrobin. Other four pesticides with cyano group also could be identified at the peak of 2180 cm-1, 2205 cm-1, 2125 cm-1, and 2130 cm-1 for acetamiprid, phoxim, thiacloprid and cymoxanil, respectively. When azoxystrobin or acetamiprid was mixed respectively with chlorpyrifos without cyano group, their SERS signals in the Raman silent region of chlorpyrifos were not interfered, while mixed with cymoxanil in different ratios (1:4, 1:1 and 4:1), respectively, each two pesticides with cyano group could be distinguished by the changes in the Raman silent region. In further, four pesticides with or without cyano group were mixed together in 1:1:1:1 (acetamiprid, cymoxanil, azoxystrobin chlorpyrifos), and each pesticide still could be identified even at 0.5 mg/L. The results showed that the SERS method combined with UV irradiation may provide a new way to monitor the pesticides with C≡N performance in the Raman silent region without interference from the food matrix.

Behavior of trifloxystrobin and propineb as combination product in tomato (Solanum lycopersicum) and their risk assessment for human health.

Fungicides have their own unique characteristics and modes of action; a combination formulation [combination product (combi product)] of trifloxystrobin and propineb was applied to tomatoes for their dissipation kinetics and to ensure consumer safety. The combi product was applied at a 10-day interval with standard (61.25 + 1072.75 g a.i. ha-1 ) and double (122.5 + 2145.50 g a.i. ha-1 ) doses. The efficient analytical method was established using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) approach followed by LC-MS. The maximum residue levels of 0.15 and 0.35 mg kg-1 of trifloxystrobin were detected in tomato fruits immediately after application at standard and double doses, respectively. The corresponding levels of propineb as carbon disulfide were 0.47 and 0.90 mg kg-1 , respectively. Considering trifloxystrobin (0.7 mg kg-1 ) codex maximum residue limit and propineb as dithiocarbamate (3.0 mg kg-1 ) European Commission maximum residue limit in tomato, a pre-harvest interval of 1 day can be proposed. The anticipated residue contributions of both fungicides were far less than the acceptable daily intake. The targeted hazard quotient and hazard index were also less than 1 for both fungicides. Furthermore, the theoretical maximum residue contribution was less than its maximum permissible intake, which indicates that the consumption of tomatoes containing the measured value of each fungicide residue could not pose any health risks.

Affinity-based isolation of extracellular vesicles by means of single-domain antibodies bound to macroporous methacrylate-based copolymer.

Correct elucidation of physiological and pathological processes mediated by extracellular vesicles (EV) is highly dependent on the reliability of the method used for their purification. Currently available chemical/physical protocols for sample fractionation are time-consuming, often scarcely reproducible and their yields are low. Immuno-capture based approaches could represent an effective purification alternative to obtain homogeneous EV samples. An easy-to-operate chromatography system was set-up for the purification of intact EVs based on a single domain (VHH) antibodies-copolymer matrix suitable for biological samples as different as conditioned cell culture medium and human plasma. Methacrylate-based copolymer is a porous solid support, the chemical versatility of which enables its efficient functionalization with VHHs. The combined analyses of morphological features and biomarker (CD9, CD63 and CD81) presence indicated that the recovered EVs were exosomes. The lipoprotein markers APO-A1 and APO-B were both negative in tested samples. This is the first report demonstrating the successful application of spherical porous methacrylate-based copolymer coupled with VHHs for the exosome isolation from biological fluids. This inexpensive immunoaffinity method has the potential to be applied for the isolation of EVs belonging to different morphological and physiological classes.

Evaluation of Residual Monomers Eluted from Pediatric Dental Restorative Materials.

Unreacted monomers eluted from resin-based restorative materials have been considered a reason of local and systemic adverse reactions. This study was designed to determine the effect of finishing and polishing procedures on the elution of Bis-GMA, TEGDMA, UDMA, and HEMA monomers from compomer and bulk-fill composite resins. Bulk-fill composite (3M ESPE GmbH, Seefeld, Germany) and compomer (Dentsply DeTrey GmbH, Konstanz, Germany) specimens with 3 × 4 mm diameters were prepared. The specimens were randomly divided into two groups, and finishing-polishing procedures were applied only to the experimental groups. Release of residual monomers was analyzed by using High-Performance Liquid Chromatography (HPLC) after 24, 48, and 72 hours. Repeated measures ANOVA and Tukey post hoc tests were used for comparisons. Finishing and polishing procedures had a significant effect on reducing the quantity of UDMA release in the Filtek™ Bulk Fill composite and Bis-GMA, HEMA, and TEGDMA in the Dyract XP compomer (p < 0.05). The restorative materials investigated here are not chemically stable after polymerization, and concentrations of eluted monomers may reach critical toxicity levels even after one restoration placement. Finishing and polishing procedures are mandatory to reduce residual monomers.

Methacrylate peak determination and selection recommendations using ATR-FTIR to investigate polymerisation of dental methacrylate mixtures.

Investigation of polymerisation kinetics using ATR-FTIR systems is common in many dental studies. However, peak selection methods to calculate monomer-polymer conversion can vary, consequently affecting final results. Thus, the aim of this study is to experimentally confirm which method is less prone to systematic errors. Three commercial restorative materials were tested-Vertise Flow (VF), Constic and Activa Bioactive Restorative Kids. Firstly, Attenuated Total Reflectance Fourier Transform Infra-Red (ATR-FTIR) (Spectrum One, Perkin-Elmer, UK) spectra of monomers were acquired-10-methacryloyloxy decyl dihydrogen phosphate (10-MDP), bisphenol-A glycidyl dimethacrylate (Bis-GMA), 2-hydroxyethyl methacrylate (HEMA), triethyelene glycol dimethacrylate (TEGDMA) and urethane dimethacrylate (UDMA) to investigate proportionality of methacrylate peak heights versus concentration. Spectral changes upon light exposure of 2 mm discs of the restorative materials (irradiated for 20 s, LED curing unit 1100-1330 mW/cm2) were assessed to study polymerisation kinetics (n = 3), with continuous acquisition of spectra, before, during and after light exposure. Peak differences and degrees of conversion (DC %) were calculated using 1320/1336, 1320/1350 and 1636/1648 cm-1 as reaction/reference peaks. Inferential statistics included a MANOVA and within-subjects repeated measures ANOVA design (5% significance level). Proportionality of methacrylate peak height to concentration was confirmed, with the 1320/1352 cm-1 peak combination showing the lowest coefficient of variation (8%). Difference spectra of the polymerisation reaction showed noise interference around the 1500-1800 cm-1 region. Across the different materials, DC % results are highly dependent upon peak selection (p<0.001), with higher variability associated to the 1636 cm-1. Significant differences in the materials were only detected when the 1320 cm-1 peak was used (p<0.05). Within the same materials, methods were significantly different for Constic and Activa (p<0.05). It is possible to conclude that the 1320 cm-1 peak is more adequate to assess polymerisation of methacrylates and is therefore recommended.

Novel synthesized attapulgite nanoparticles-based hydrophobic monolithic column for in-tube solid-phase microextraction of thiosildenafil, pseudovardenafil, and norneosildenafil in functional foods.

In this study, a novel method which involved in-tube solid-phase microextraction (SPME) using an attapulgite (ATP) nanoparticles-based hydrophobic monolithic column was successfully developed. It was coupled with high-performance liquid chromatography-ultraviolet detection for the determination of three phosphodiesterase-5 (PDE-5) inhibitors, including thiosildenafil, pseudovardenafil, and norneosildenafil, in functional foods. The monolithic column was prepared by one-step polymerization, using 3-trimethoxysilylpropyl methacrylate-modified ATP nanoparticles and 1-butyl-3-vinylimidazolium bromide (VBIMBr) as the functional monomers, and ethylene glycol dimethacrylate (EDMA) as the cross-linker. The obtained poly(ATP-VBIMBr-EDMA) monolith was characterized by scanning electron microscopy equipped with energy-dispersive analysis of X-ray, Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction. The adsorption capacity, up to 2.00 µg/cm calculated by the Langmuir isotherm model, was about six times that of the poly(VBIMBr-EDMA) monolith. Crucial factors affecting the extraction efficiency, including sample solvent, elution solvent, flow rates of sampling loading and elution, sample loading volume, and elution volume, were investigated in details. Under the optimal in-tube SPME conditions, the proposed method showed good reproducibility with run-to-run, column-to-column, and batch-to-batch relative standard deviations less than 7.2%, and low limits of detection of 0.5-0.9 ng/mL in real samples. Thiosildenafil was detected in four types of functional foods with the contents of 1.30-4.78 µg/g. This newly proposed in-tube SPME method based on poly(ATP-VBIMBr-EDMA) monolith may provide a simple, efficient, and promising alternative to daily monitoring of PDE-5 inhibitors in functional foods.

Evaluation of molecularly imprinted polymers for chlorpromazine and bromopromazine prepared by multi-step swelling and polymerization method-The application for the determination of chlorpromazine and its metabolites in rat plasma by column-switching LC.

Monodisperse molecularly imprinted polymers (MIPs) for chlorpromazine (CPZ) and bromopromazine (BPZ), MIPCPZ and MIPBPZ, were prepared using methacrylic acid as a functional monomer and ethylene glycol dimethacrylate as a crosslinker by multi-step swelling and polymerization. The retention and molecular-recognition properties of MIPCPZ and MIPBPZ were evaluated using a mixture of potassium phosphate buffer and acetonitrile or a mixture of water and acetonitrile including ammonium formate as a mobile phase in reversed-phase LC. On MIPBPZ, CPZ, BPZ and imipramine (IMP) gave the maximal retention factors at a mobile-phase pH 8, while the maximal imprinting factors were obtained at a mobile-phase pH 7. Each MIP recognized a template molecule the most, while CPZ metabolites, desmethyl CPZ (DM-CPZ), CPZ sulfoxide (CPZ-SO) and 7-hydroxy CPZ (7-OH-CPZ), were moderately recognized on MIPCPZ and MIPBPZ. Furthermore, both MIPs gave the similar retention and molecular-recognition for CPZ and its metabolites. For avoiding the template-leakage problems, MIPBPZ was used as the pretreatment column for the determination of CPZ and its metabolites in rat plasma in column-switching LC with UV detection. In addition to DM-CPZ and CPZ-SO, didesmethyl CPZ (DDM-CPZ) and CPZ N-oxide (CPZ-NO) were speculated as the metabolite in rat plasma after administration of CPZ using LC-ESI-TOF-MS, while 7-OH-CPZ was not detected. The column-switching LC method was validated and applied for the determination of CPZ and its metabolites, DM-CPZ, DDM-CPZ, CPZ-SO and CPZ-NO, in rat plasma after intravenous and oral administration of CPZ using IMP as an internal standard.

[Determination of 15 amide herbicides in rice using monolith column for on-line solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry].

A method based on on-line solid-phase extraction (SPE) coupled with high performance liquid chromatography-tandem mass spectrometry was developed for the simultaneous determination of 15 amide herbicides in rice. A poly(butyl methacrylate-co-ethylene dimethacrylate) monolithic column was utilized as the solid-phase column. The sample was extracted with acetonitrile, cleaned up with the monolithic column in online mode. Subsequently, the analyte was eluted from the extraction column onto the analytical column (Hypersil GOLD column) by 0.5%(v/v) formic acid aqueous solution-acetonitrile in gradient elution mode. Electrospray ionization mass spectrometry was performed in the positive mode and multiple reaction monitoring (MRM) mode. Under the optimized conditions, good linearities were obtained with correlation coefficients of more than 0.998. The limits of detection (LODs) and limits of quantification (LOQs) were in the range 0.20-2.0 µg/kg and 0.50-5.0 µg/kg, respectively. The average recoveries were in the range 75.5% to 121.3% at spiked levels of 2.0, 5.0, 10.0, and 50.0 µg/kg for 14 amide herbicides and 5.0, 10.0, 50.0, and 100.0 µg/kg for propanil. The relative standard deviations ranged from 2.89% to 12.38%. The proposed method is simple, rapid, and highly sensitive, and it can be applied to the simultaneous identification and quantification of the 15 amide herbicides in rice.

Infrared Spectroscopic Quantification of Methacrylation of Hyaluronic Acid: A Scaffold for Tissue Engineering Applications.

Methacrylated hyaluronic acid (MeHA) has been used extensively in tissue engineering and drug delivery applications. The degree of methacrylation (DM) of HA impacts hydrogel crosslinking, which is of pivotal importance for cell interactions. The methacrylation reaction occurs over several hours, and DM is currently assessed post reaction and after dialysis of the solution, using nuclear magnetic resonance (1H NMR) data. Thus, there is little control over exact DM in a specific reaction. Here, infrared (IR) spectroscopy in attenuated total reflection (ATR) mode was investigated as an alternate modality for assessment of the DM of HA hydrogels, including during the reaction progression. Attenuated total reflection is a low-cost technique that is widely available in research and industry labs that can be used online during the reaction process. Strong correlations were achieved with IR-derived peak heights from dialyzed and lyophilized samples at 1708 cm-1 (from the methacrylic ester carbonyl vibration), and 1H NMR values ( R = 0.92, P = 6.56E-11). Additional IR peaks of importance were identified using principal component analysis and resulted in significant correlations with the 1H NMR DM parameter: 1454 cm-1 ( R = 0.85, P = 2.81E-8), 1300 cm-1 ( R = 0.95, P = 4.50E-14), 950 ( R = 0.85, P = 3.55E-8), 856 cm-1 ( R = 0.94, P = 1.20E-12), and 809 cm-1 ( R = 0.93, P = 3.54E-12). A multiple linear regression model to predict 1H NMR-derived DM using the 1708, 1300, and 1200 cm-1 peak heights as independent variables resulted in prediction with an error of 3.2% using dialyzed and lyophilized samples ( P < 0.001). Additionally, a multilinear regression model to predict the DM in undialyzed liquid MeHA samples obtained during the reaction process using similar peak height positions as independent variables resulted in a prediction error of 0.81% ( P < 0.05). Thus, IR spectroscopy can be utilized as an alternate modality to 1H NMR for quantification of the DM of MeHA while sampling either on-line during the methacrylation reaction as well as in post-lyophilized products. This could greatly simplify workflow for tissue engineering and other applications.

In vitro and field efficacy of fungicides against sheath blight of rice and post-harvest fungicide residue in soil, husk, and brown rice using gas chromatography-tandem mass spectrometry.

Rice is a staple food for about 65% of the India's population. India ranks first in area under rice and second in production of rice in the world. In India, it is cultivated over 43.39 m ha with a production and productivity of 104.32 million tons and 2404 kg/ha, respectively. Besides ensuring food security of the nation, it is an export commodity and earns a huge foreign exchange. In this study, we investigated the efficacy of five fungicides against Rhizoctonia solani Kuhn AG-1 IA, inciting sheath blight of rice in vitro and under field conditions along with post-harvest residue of the fungicides found effective in disease management. In vitro growth inhibition tests revealed that the EC50 values of azoxystrobin 18.2% + difenoconazole 11.4% SC, pencycuron 22.9% SC, thifluzamide 23.9% SC, hexaconazole 4% + zineb 68% WP, and validamycin 3% L against Rhizoctonia solani ranged from 0.006 to 354.81 ppm a.i., whereas the corresponding EC90 values were 0.758 to 1202.26 ppm a.i. Thifluzamide 23.9% SC was found to be the most inhibitory with EC50 and EC90 values of 0.006 and 0.758 ppm a.i. followed by hexaconazole 4% + zineb 68% WP. The complete inhibition of sclerotia formation was observed at 1 ppm, 20 ppm, and 25 ppm a.i. of thifluzamide 23.9% SC, hexaconazole 4% + zineb 68% WP, and azoxystrobin 18.2% + difenoconazole 11.4% SC, respectively. In field trials, azoxystrobin 18.2% + difenoconazole 11.4% SC was the best treatment in reducing sheath blight and in enhancing grain yield of rice followed by thifluzamide 23.9% SC, pencycuron 22.9% SC, and validamycin 3% L, whereas hexaconazole 4% + zineb 68% WP was the least effective fungicide. Benefit-cost ratio (B:C) of different fungicides reflected that pencycuron 22.9% SC (B:C 5.06) and azoxystrobin 18.2% + difenoconazole 11.4% SC(B:C 4.65) sprayed at single/recommended doses of 1 ml/l were highly economical in managing sheath blight disease of rice. Double dose of pencycuron 22.9% SC further enhanced the B:C to 7.24 while the double dose of azoxystrobin 18.2% + difenoconazole 11.4% SC was less economical (B:C 2.84) compared to their recommended doses. Samples of rice matrices were processed using QuEChERS method and analyzed for the presence of fungicide residues by gas chromatography-tandem mass spectrometry (GC-MS/MS). The post-harvest residues of azoxystrobin, difenoconazole, and pencycuron, sprayed at single/recommended and double doses with a pre-harvest interval (PHI) of 44 days, were found below the limit of quantification (LOQ), i.e., 0.01 and 0.005 mg kg-1 for azoxystrobin and difenoconazole and 0.05 mg kg-1 for pencycuron in brown rice, cropped soil, paddy straw, and husk. These results clearly demonstrated that treatment of azoxystrobin 18.2% + difenoconazole 11.4% SC and pencycuron 22.9% SC could be taken as safe for crop protection and environmental contamination point of view. The findings of this research work will have a positive impact on rice export and use.

Preparation and characterization of silane-modified SiO2 particles reinforced resin composites with fluorinated acrylate polymer.

A series of fluorinated dental resin composites were prepared with two kinds of SiO2 particles. Bis-GMA (bisphenol A-glycerolate dimethacrylate)/4-TF-PQEA (fluorinated acrylate monomer)/TEGDMA (triethylene glycol dimethacrylate) (40/30/30, wt/wt/wt) was introduced as resin matrix. SiO2 nanopartices (30nm) and SiO2 microparticles (0.3µm) were silanized with 3-methacryloxypropyl trimethoxysilane (γ-MPS) and used as fillers. After mixing the resin matrix with 0%, 10%, 20%, 30% SiO2 nanopartices and 0%, 10%, 20%, 30%, 40%, 50% SiO2 microparticles, respectively, the fluorinated resin composites were obtained. Properties including double bond conversion (DC), polymerization shrinkage (PS), water sorption (Wp), water solubility (Wy), mechanical properties and cytotoxicity were investigated in comparison with those of neat resin system. The results showed that, filler particles could improve the overall performance of resin composites, particularly in improving mechanical properties and reducing PS of composites along with the addition of filler loading. Compared to resin composites containing SiO2 microparticles, SiO2 nanoparticles resin composites had higher DC, higher mechanical properties, lower PS and lower Wp under the same filler content. Especially, 50% SiO2 microparticles reinforced resins exhibited the best flexural strength (104.04 ± 7.40MPa), flexural modulus (5.62 ± 0.16GPa), vickers microhardness (37.34 ± 1.13 HV), compressive strength (301.54 ± 5.66MPa) and the lowest polymerization (3.42 ± 0.22%).

Degree of conversion of resin cement with varying methacrylate compositions used to cement fiber dowels: A Raman spectroscopy study.

STATEMENT OF PROBLEM: Studies on the degree of conversion of dental cement in relation to the number of methacrylate components are lacking. PURPOSE: The purpose of this in vitro study was to evaluate the degree of conversion of single- and multicomponent methacrylate-containing dental cements around opaque and translucent fiber dowels at varying depths. MATERIAL AND METHODS: Teeth were prepared for standard endodontic therapy, and a dowel space was created. Opaque and translucent fiber dowels consisting of Aestheti-Plus (AP) and FiberKleer were cemented with 4 methacrylate (MA)-containing cements, including RelyX U100 (R), which contains TEGDMA; Duolink (D), which contains TEGDMA and BisGMA; and Variolink N LC (V) and Breeze (B), which contain TEGDMA, BisGMA, and UDMA. Light-emitting diode polymerization was performed for 60 seconds. The specimens were immediately cut into halves and measured within the first hour at depths of 1, 3, and 5 mm using Raman spectroscopy, and the degree of conversion (DC) of resin cement was calculated. Data were analyzed using 3-way ANOVA and the Tukey multiple comparison test (α=.05). RESULTS: The measured dowel regions were not significantly different at various depths (P=.10). The dowel and cement types significantly influenced the degree of conversion of the cement (P<.05). The V and B cements exhibited a higher DC than D and R cements. With AP dowels, the DC of cement D was lower than that of the V, B, and R cements. CONCLUSIONS: Within the limitations of this in vitro study, the degrees of conversion of the tested resin cements were not affected by the tested dowel depths. Higher DC was found in cement with more than 2 types of flexible MA. Opaque dowels produced a lower DC than translucent dowels.

Structural analysis of photocrosslinkable methacryloyl-modified protein derivatives.

Biochemically modified proteins have attracted significant attention due to their widespread applications as biomaterials. For instance, chemically modified gelatin derivatives have been widely explored to develop hydrogels for tissue engineering and regenerative medicine applications. Among the reported methods, modification of gelatin with methacrylic anhydride (MA) stands out as a convenient and efficient strategy to introduce functional groups and form hydrogels via photopolymerization. Combining light-activation of modified gelatin with soft lithography has enabled the materialization of microfabricated hydrogels. So far, this gelatin derivative has been referred to in the literature as gelatin methacrylate, gelatin methacrylamide, or gelatin methacryloyl, with the same abbreviation of GelMA. Considering the complex composition of gelatin and the presence of different functional groups on the amino acid residues, both hydroxyl groups and amine groups can possibly react with methacrylic anhydride during functionalization of the protein. This can also apply to the modification of other proteins, such as recombinant human tropoelastin to form MA-modified tropoelastin (MeTro). Here, we employed analytical methods to quantitatively determine the amounts of methacrylate and methacrylamide groups in MA-modified gelatin and tropoelastin to better understand the reaction mechanism. By combining two chemical assays with instrumental techniques, such as proton nuclear magnetic resonance (1H NMR) and liquid chromatography tandem-mass spectrometry (LC-MS/MS), our results indicated that while amine groups had higher reactivity than hydroxyl groups and resulted in a majority of methacrylamide groups, modification of proteins by MA could lead to the formation of both methacrylamide and methacrylate groups. It is therefore suggested that the standard terms for GelMA and MeTro should be defined as gelatin methacryloyl and methacryloyl-substituted tropoelastin, respectively, to remain consistent with the widespread abbreviations used in literature.

Determination of strobilurin fungicide residues in fruits and vegetables by nonaqueous micellar electrokinetic capillary chromatography with indirect laser-induced fluorescence.

A nonaqueous micellar electrokinetic capillary chromatography method with indirect LIF was developed for the determination of strobilurin fungicide residues in fruits and vegetables. Hydrophobic CdTe quantum dots (QDs) synthesized in aqueous phase were used as background fluorescent substance. The BGE solution, QD concentration, and separation voltage were optimized to obtain the best separation efficiency and the highest signal intensity. The optimal BGE solution consists of 40 mM phosphate, 120 mM sodium dodecyl sulfate, 15% v/v water and 15% v/v hydrophobic CdTe QDs in formamide, of which apparent pH is 9.5. The optimized separation voltage is controlled as 25 kV. The resultant detection limits of azoxystrobin, kresoxim-methyl, and pyraclostrobin are all 0.001 mg/kg, their linear dynamic ranges are 0.005-2.5 mg/kg, and the recoveries of the spiked samples are 81.7-96.1%, 86.5-95.7%, and 87.3-97.4%, respectively. This method has been proved to be sensitive enough to detect the aforementioned fungicides in fruits and vegetables at the maximum residue limits.

Analysis of organic components in resin-modified pulp capping materials: critical considerations.

The purpose of this study was to elucidate the organic composition and eluates of three resin-based pulp-capping materials in relation to their indications and safety data sheets. Uncured samples of Theracal LC, Ultra-Blend Plus, and Calcimol LC were investigated using gas chromatography-mass spectrometry (GC-MS) and ultra-performance liquid chromatography-mass spectrometry (UPLC-MS). Identification/quantification of 7-d leachables of cured samples was performed using GC-MS for 2-hydroxyethyl methacrylate (HEMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA), camphorquinone (CQ), ethylene glycol dimethacrylate (EGDMA), ethyl-4-(dimethylamino)benzoate (DMABEE), and triethylene glycol dimethacrylate (TEGDMA). A similar organic composition was found for Ultra-Blend and Calcimol; however, only Ultra-Blend is indicated for direct pulp-capping. In contrast to the other materials analysed, Theracal contained substances of high molecular weight. The safety data sheets of all materials were incomplete. We detected HEMA, CQ, and TEGDMA in eluates from Ultra-Blend and Calcimol, and it was considered that HEMA might have originated from decomposition of diurethane dimethacrylate (UDMA) in the GC-injector. For Theracal, additives associated with light curing (DMABEE and CQ) were detected in higher amounts (4.11 and 19.95 µg mm-2 ) than in the other materials. Pores were quantified in all samples by micro-computed tomography (micro-CT) analysis, which could influence leaching. The organic substances in the investigated materials might affect their clinical suitability as capping agents, especially for direct capping procedures.

Simultaneous determination of difenoconazole, trifloxystrobin and its metabolite trifloxystrobin acid residues in watermelon under field conditions by GC-MS/MS.

An optimized quick, easy, cheap, effective, rugged and safe method for the simultaneous determination of difenoconazole, trifloxystrobin and its metabolite trifloxystrobin acid residues in watermelon and soil was developed and validated by gas chromatography with tandem mass spectrometry. The samples were extracted with acetonitrile (1% formic acid) and cleaned up by dispersive solid-phase extraction with octadecylsilane sorbent. The limit of quantification of the method was 0.01 mg/kg, and the limit of detection was 0.003 mg/kg for all three analytes. The recoveries of the fungicides in watermelon, pulp and soil were 72.32-99.20% for difenoconazole, 74.68-87.72% for trifloxystrobin and 78.59-92.66% for trifloxystrobin acid with relative standard deviations of 1.34-14.04%. The dissipation dynamics of difenoconazole and trifloxystrobin in watermelon and soil followed the first-order kinetics with half-lives of 3.2-8.8 days in both locations. The final residue levels of difenoconazole and trifloxystrobin were below 0.1 mg/kg (maximum residue level [MRL] set by China) and 0.2 mg/kg (MRL set by European Union), respectively, in pulp samples collected 14 days after the last application. These results could help Chinese authorities to establish MRL of trifloxystrobin in watermelon and provide guidance for the safe and proper application of both fungicides on watermelon.

Tailored poly(ethylene) glycol dimethacrylate based shape memory polymer for orthopedic applications.

Shape-memory polymers (SMPs) are stimuli-responsive materials known for their outstanding ability to be actuated from temporary shape into original shape. Because of this unique functionality SMPs are promising materials for diverse technological applications including smart biomedical devices. In this article, the work has been focused towards tailoring the SMP precursor and crosslinker wt% to obtain biocompatible acrylate based shape memory polymer with glass transition temperature (Tg) close to human body temperature. Methacrylate based shape memory polymer networks are synthesized via free radical polymerization by varying the wt% of t-butyl acrylate (tBA) and poly(ethylene glycol) dimethacrylate (PEGDMA) as crosslinker. The Tg is found to increase from 28 to 45°C with increasing tBA amount. The SMP synthesized from 70wt% of tBA and 30wt% of PEGDMA possess Tg close to human body temperature and is tested for cytotoxicity with two different cell lineages, osteosarcoma (MG-63) cells, and human keratinocyte (HaCaT) cells. The synthesized SMP is found to be non-cytotoxic. Thus the investigated biocompatible shape memory polymer network can be a promising soft substrate for passive thermomechanical stimulation which can adapt and meet specific needs of in vitro or in vivo orthopedic Superior Labrum Anterior and Posterior (SLAP) medical devices.

Simultaneous Determination of Seven Kinds of Fungicides in Citrus Fruits by Gas Chromatograghy/Mass Spectrometry.

A simple and accurate procedure was developed for the determination of seven fungicides, azoxystrobin (AZO), diphenyl (DP), fludioxonil (FLUDI), imazalil (IMZ), o-phenylphenol (OPP), pyrimethanil (PYRI) and thiabendazole (TBZ), in citrus fruits. The citrus fruit sample was extracted with acetonitrile and cleaned up with a graphite carbon/aminopropyl silanized silica gel solid-phase extraction cartridge using acetonitrile-toluene (3 : 1, v/v) as the eluent. Triphenylene was used as an internal standard (I.S.) at the concentration of 0.5 µg/mL. The sample solution was subjected to GC-MS utilizing the matrix-matched standard solution method. The recoveries of AZO, FLUDI, IMZ, OPP, PYRI and TBZ spiked in domestic citrus fruits (Satsuma mandarin) at the level of 0.01-10.0 µg/g were 72.8-104% and the limits of quantification were 0.01 µg/g. The recoveries of DP spiked in domestic citrus fruits at the level of 0.01-70.0 µg/g were 70.8-80.4% and the limit of quantification was 0.01 µg/g. The proposed method was applied to the determination of fungicides in citrus fruits purchased in various markets.

Leaching of the Neonicotinoids Thiamethoxam and Imidacloprid from Sugar Beet Seed Dressings to Subsurface Tile Drains.

Pesticide transport from seed dressings toward subsurface tile drains is still poorly understood. We monitored the neonicotinoid insecticides imidacloprid and thiamethoxam from sugar beet seed dressings in flow-proportional drainage water samples, together with spray applications of bromide and the herbicide S-metolachlor in spring and the fungicides epoxiconazole and kresoxim-methyl in summer. Event-driven, high first concentration maxima up to 2830 and 1290 ng/L for thiamethoxam and imidacloprid, respectively, were followed by an extended period of tailing and suggested preferential flow. Nevertheless, mass recoveries declined in agreement with the degradation and sorption properties collated in the groundwater ubiquity score, following the order bromide (4.9%), thiamethoxam (1.2%), imidacloprid (0.48%), kresoxim-methyl acid (0.17%), S-metolachlor (0.032%), epoxiconazole (0.013%), and kresoxim-methyl (0.003%), and indicated increased leaching from seed dressings compared to spray applications. Measured concentrations and mass recoveries indicate that subsurface tile drains contribute to surface water contamination with neonicotinoids from seed dressings.