Bioinspired Durable Antibacterial and Antifouling Coatings Based on Borneol Fluorinated Polymers: Demonstrating Direct Evidence of Antiadhesion.

Substituting natural products for traditional poison-killing antifouling agents is an efficient and promising method to alleviate the increasingly serious ecological crisis and aggravate the loss due to marine biofouling. Herein, the successful synthesis of poly(methyl methacrylate-co-ethyl acrylate-co-hexafluorobutyl methacrylate-co-isobornyl methacrylate) copolymer (PBAF) with borneol monomers and fluorine by a free radical polymerization method is reported. The PBA0.09F coating exhibits outstanding antibacterial and antifouling activity, achieving 98.2% and 92.3% resistance to Escherichia coli and Staphylococcus aureus, respectively, and the number of Halamphora sp. adhesion is only 26 (0.1645 mm2) in 24 h. This remarkable antibacterial and antifouling performance is attributed to the incorporation of fluorine components into the copolymer, which induces a low surface energy and hydrophobicity and the complex molecular structure of the natural nontoxic antifouling agent borneol. In addition, the results showed that the contents of the adhesion-related proteins mfp-3, mfp-5, and mfp-6 were significantly reduced, which proved that natural substances affect the secretion of biological proteins. Importantly, the PBAF coating exhibits excellent environmental friendliness and long-term stability. The antifouling mechanism is clarified, and an effective guide for an environmentally friendly antifouling coating design is proposed.

Surface Plasmon Resonance Based on Molecularly Imprinted Polymeric Film for l-Phenylalanine Detection.

In this study, we designed a simple, rapid, sensitive and selective surface plasmon resonance (SPR) sensor for detection of L-phenylalaine by utilizing molecular imprinting technology. l-phenylalanine imprinted and non-imprinted poly(2-hydroxyethyl methacrylate-methacryloyl-l-phenylalanine) polymeric films were synthesized onto SPR chip surfaces using ultraviolet polymerization. l-phenyalanine imprinted and non-imprinted SPR sensors were characterized by using contact angle, atomic force microscopy and ellipsometry. After characterization studies, kinetic studies were carried out in the concentration range of 5.0-400.0 µM. The limit of detection and quantification were obtained as 0.0085 and 0.0285 µM, respectively. The response time for the test including equilibration, adsorption and desorption was approximately 9 min. The selectivity studies of the l-phenylalanine imprinted SPR sensor was performed in the presence of d-phenylalanine and l-tryptophan. Validation studies were carried out via enzyme-linked immunosorbent analysis technique in order to demonstrate the applicability and superiority of the l-phenylalanine imprinted SPR sensor.

Synthesis of Block Copolymer Brush by RAFT and Click Chemistry and Its Self-Assembly as a Thin Film.

A well-defined block copolymer brush poly(glycidyl methacrylate)-graft-(poly(methyl methacrylate)-block- poly(oligo(ethylene glycol) methyl ether methacrylate)) (PGMA-g-(PMMA-b-POEGMA)) is synthesized via grafting from an approach based on a combination of click chemistry and reversible addition-fragmentation chain transfer (RAFT) polymerization. The resulting block copolymer brushes were characterized by 1H-NMR and size exclusion chromatography (SEC). The self-assembly of the block copolymer brush was then investigated under selective solvent conditions in three systems: THF/water, THF/CH3OH, and DMSO/CHCl3. PGMA-g-(PMMA-b-POEGMA) was found to self-assemble into spherical micelle structures as analyzed by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The average size of the particles was much smaller in THF/CH3OH and DMSO/CHCl3 as compared with the THF/water system. Thin film of block copolymer brushes with tunable surface properties was then prepared by the spin-coating technique. The thickness of the thin film was confirmed by scanning electron microscopy (SEM). Atom force microscopy (AFM) analysis revealed a spherical morphology when the block copolymer brush was treated with poor solvents for the backbone and hydrophobic side chains. The contact angle measurements were used to confirm the surface rearrangements of the block copolymer brushes.

Mechanistic insight into the interaction of gastrointestinal mucus with oral diblock copolymers synthesized via ATRP method.

INTRODUCTION: Nanoparticles are increasingly used as drug carriers for oral administration. The delivery of drug molecules is largely dependent on the interaction of nanocarriers and gastrointestinal (GI) mucus, a critical barrier that regulates drug absorption. It is therefore important to understand the effects of physical and chemical properties of nanocarriers on the interaction with GI mucus. Unfortunately, most of the nanoparticles are unable to be prepared with satisfactory structural monodispersity to comprehensively investigate the interaction. With controlled size, shape, and surface chemistry, copolymers are ideal candidates for such purpose. MATERIALS AND METHODS: We synthesized a series of diblock copolymers via the atom transfer radical polymerization method and investigated the GI mucus permeability in vitro and in vivo. RESULTS: Our results indicated that uncharged and hydrophobic copolymers exhibited enhanced GI absorption. CONCLUSION: These results provide insights into developing optimal nanocarriers for oral administration.

Sustained tobramycin release from polyphosphate double network hydrogels.

Sustained local delivery of antibiotics from a drug reservoir to treat or prevent bacterial infections can avoid many of the drawbacks of systemic administration of antibiotics. Prolonged local release of high concentrations of antibiotics may also be more effective at treating bacteria in established biofilm populations that are resistant to systemic antibiotics. A double network hydrogel comprising an organic polyphosphate pre-polymer network polymerized within a polyacrylamide network de-swelled to about 50% of its initial volume when the polyphosphate network was crosslinked with polycationic tobramycin, an aminoglycoside antibiotic. The antibiotic-loaded hydrogels contained approximately 200mg/ml of tobramycin. The hydrogels continuously released daily amounts of tobramycin above the Pseudomonas aeruginosa minimal bactericidal concentration for greater than 50days, over the pH range 6.0-8.0, and completely eradicated established P. aeruginosa biofilms within 72h in a flow cell bioreactor. The presence of physiological concentrations of Mg2+ and Ca2+ ions doubled the cumulative release over 60days. The polyphosphate hydrogels show promise as materials for sustained localized tobramycin delivery to prevent post-operative P. aeruginosa infections including infections established in biofilms. STATEMENT OF SIGNIFICANCE: Polyphosphate hydrogels were loaded with high concentrations of tobramycin. The hydrogels provided sustained release of bactericidal concentrations of tobramycin for 50days, and were capable of completely eradicating P. aeruginosa in established biofilms. The hydrogels have potential for localized prevention or treatment of P. aeruginosa infections.

Polymerization Induced Self-Assembly of Alginate Based Amphiphilic Graft Copolymers Synthesized by Single Electron Transfer Living Radical Polymerization.

Alginate-based amphiphilic graft copolymers were synthesized by single electron transfer living radical polymerization (SET-LRP), forming stable micelles during polymerization induced self-assembly (PISA). First, alginate macroinitiator was prepared by partial depolymerization of native alginate, solubility modification and attachment of initiator. Depolymerized low molecular weight alginate (∼12 000 g/mol) was modified with tetrabutylammonium, enabling miscibility in anhydrous organic solvents, followed by initiator attachment via esterification yielding a macroinitiator with a degree of substitution of 0.02, or 1-2 initiator groups per alginate chain. Then, methyl methacrylate was polymerized from the alginate macroinitiator in mixtures of water and methanol, forming poly(methyl methacrylate) grafts, prior to self-assembly, of ∼75 000 g/mol and polydispersity of 1.2. PISA of the amphiphilic graft-copolymer resulted in the formation of micelles with diameters of 50-300 nm characterized by light scattering and electron microscopy. As the first reported case of LRP from alginate, this work introduces a synthetic route to a preparation of alginate-based hybrid polymers with a precise macromolecular architecture and desired functionalities. The intended application is the preparation of micelles for drug delivery; however, LRP from alginate can also be applied in the field of biomaterials to the improvement of alginate-based hydrogel systems such as nano- and microhydrogel particles, islet encapsulation materials, hydrogel implants, and topical applications. Such modified alginates can also improve the function and application of native alginates in food and agricultural applications.

Preparation of 17ß-estradiol surface molecularly imprinted polymers and their application to the analysis of biological samples.

17ß-Estradiol (E2) surface molecularly imprinted polymers have been prepared using functionalized monodispersed poly(glycidyl methacrylate-co-ethylene dimethacrylate) beads as a support. The resulting polymers were found to be uniform in size (5 µm), and the surfaces of the microspheres possessed large pore-like structures. A chromatographic experiment demonstrated that the resulting microspheres exhibited high levels of recognition and selectivity toward the target molecule. The particles were employed as a novel sorbent in a molecularly imprinted SPE protocol. A method was then developed involving the combination of the pretreatment with HPLC to determine the levels of estrogen secreted from Michigan Cancer Foundation-7 cells. The obtained results revealed that the extraction recoveries of E2 from real samples were in the range of 73.0-97.5% with RSDs of < 7.5% (n = 3). Calibration curves were established with R values > 0.9996 for concentrations in the range of 0.50-100.00 ng/mL. The LOD of this new method was 0.14 ng/mL. Compared with traditional C18 SPE agents, the particles showed high selectivity and extraction efficiency for E2 in the pretreatment process. The particles could therefore be used to determine trace estrogen in biological samples with a UV detector only.

Synthesis, characterization, and antimicrobial activity of poly(acrylonitrile-co-methyl methacrylate) with silver nanoparticles.

Nanotechnology is expected to open some new aspects to fight and prevent diseases using atomic-scale tailoring of materials. The main aim of this study is to biosynthesize silver nanoparticles (AgNPs) using Trichoderma viride (HQ438699); the metabolite of this fungus will help either in reduction of the silver nitrate-adding active materials which will be loaded on the surface of the produced AgNPs. Poly(acrylonitrile-co-methyl methacrylate) copolymer (poly (AN-co-MMA)) was grafted with the prepared AgNPs. The poly(AN-co-MMA)/AgNPs were examined against ten different pathogenic bacterial strains, and the result was compared with another four different generic antibiotics. The produced poly(AN-co-MMA)/AgNPs showed high antibacterial activity compared with the four standard antibiotics. Moreover, the grafting of these AgNPs into the copolymer has potential application in the biomedical field.

Ensuring repeatability and robustness of poly(glycidyl methacrylate-co-ethylene dimethacrylate) HPLC monolithic columns of 3 mm id through covalent bonding to the column wall.

Two different methods to reinforce the poly(glycidyl methacrylate-co-ethylene dimethacrylate) HPLC monolithic columns of 3 mm id in a glass column reservoir were studied: composite columns with polymeric particles in the monolith and surface treatment of the reservoir wall. Of the two methods used to counter the mechanical instability and formation of flow channels (composite columns and column wall surface treatment), we demonstrated that proper column wall surface treatment was sufficient to solve both problems. Our study also indicated that no surface treatment is efficient, and of the methods studied silanization in acidified ethanol solution and constant renewal of the reaction mixture (dynamic mode) proved to be the most effective. As a result of this study, we have been able to prepare repeatable and durable methacrylate HPLC columns with good efficiencies.

An innovative approach to molecularly imprinted capillaries for polar templates by grafting polymerization.

Molecularly imprinted polymers have been successfully used as selective stationary phases in capillary electrophoresis. Notwithstanding, this technique suffers from several drawbacks as the loss of molecular recognition properties in aqueous media and the lack of feasibility for imprinted systems directed towards highly polar templates soluble in aqueous environments only. Thus, the preparation of imprinted polymers for highly polar, water-soluble analytes, represents a challenge. In this work, we present an innovative approach to overcome these drawbacks. It is based on a surface molecular imprinting technique that uses preformed macromonomers as both functional recognition elements and cross-linking agents. A poly-2-hydroxyethyl-co-methacrylic acid linear polymer was grafted from the surface of silica capillaries. The grafted polymer was exhaustively esterified with methacrylic anhydride to obtain polyethylendimethacrylate-co-methacrylic acid linear chains. Then, as a proof of concept, an adequate amount of a very polar template like penicillin V was added in a hydro-organic mixture, and a thin layer of imprinted polymer was obtained by cross-linking the polymer linear chains. The binding behaviour of the imprinted and non-imprinted capillaries was evaluated in different separation conditions in order to assess the presence of template selectivity and molecular recognition effects. The experimental results clearly show that this innovative kind of imprinted material can be easily obtained in very polar polymerization environments and that it is characterized by enhanced molecular recognition properties in aqueous buffers and good selectivity towards the template and strictly related molecules.

Synthesis and characterization of ammonium functionalized porous poly(glycidyl methacrylate-co-ethylene dimethacrylate) monoliths for microscale analysis and its application to DNA purification.

A systematic study of parameters affecting the nucleophilic addition of secondary and tertiary amines on reactive epoxy groups was conducted on porous polymer monoliths. Reaction of small amines like diethylamine (DEA) or triethylamine (TEA) on poly(glycidyl methacrylate-co-ethylene dimethacrylate) monoliths (poly(GMA-co-EDMA)) allows to prepare anion exchange media. This study aimed to determine optimal and suitable conditions to prepare anion-exchange porous monolith inside 100 microm internal diameter capillary. The reaction kinetic of amine nucleophilic addition on porous poly(GMA-co-EDMA) monoliths was followed by FTIR-ATR spectroscopy. The reactivity of such epoxy-functionalized porous polymers was first determined through a study in pure amine solutions. Thereafter, conditions of reactions (i.e., temperature and time of reaction, solvent composition, concentration of amine) with respect to its further implementation at nanoscale, were optimized through a factorial analysis. The optimization allowed extending conversion yields of epoxy groups up to more than 90% in dilute amine solution within less than 4 hours of reaction for TEA addition. This ion-exchange support with respect to the in-situ light-addressable process of elaboration is specifically designed to be incorporated as biomolecular sample preparation module in microsystem devices. The high loading capacity obtained for the preconcentration of DNA demonstrate the attractivity of this functionalized polymeric porous monolith as solid-phase support to improve the quantity and the efficiency of DNA extraction applied into microscale format like capillaries or lab-on-chip.

Biocompatibility of modified polyethersulfone membranes by blending an amphiphilic triblock co-polymer of poly(vinyl pyrrolidone)-b-poly(methyl methacrylate)-b-poly(vinyl pyrrolidone).

An amphiphilic triblock co-polymer of poly(vinyl pyrrolidone)-b-poly(methyl methacrylate)-b-poly(vinyl pyrrolidone) (PVP-b-PMMA-b-PVP) was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. The block co-polymer can be directly blended with polyethersulfone (PES) using dimethylacetamide (DMAC) as the solvent to prepare flat sheet and hollow fiber membranes using a liquid-liquid phase separation technique. The PVP block formed a brush on the surface of the blended membrane, while the PMMA block mingled with the PES macromolecules, which endowed the membrane with permanent hydrophilicity. After adding the as-prepared block co-polymer the modified membranes showed lower protein (bovine serum albumin) adsorption, suppressed platelet adhesion, and a prolonged blood coagulation time, and thereby the blood compatibility was improved. Furthermore, the modified PES membranes showed good cytocompatibility, ultrafiltration and protein anti-fouling properties. These results suggest that surface modification of PES membranes by blending with the amphiphilic triblock co-polymer PVP-b-PMMA-b-PVP allows practical application of these membranes with good biocompatibility in the field of blood purification, such as hemodialysis and bioartificial liver support.

Characterisation and toxicological behaviour of Basic Methacrylate Copolymer for GRAS evaluation.

Basic Methacrylate Copolymer is a fully polymerised cationic copolymer with taste-masking and moisture protection properties. It is used as a pharmaceutical excipient and has potential use as a glazing/coating agent to solid food supplements. This article describes available information on the safety of the substance. Oral administration of radiolabelled copolymer to rats showed the major route of excretion to be via the faeces. Minor absorption may occur at <0.02%. Safety studies revealed no adverse toxicity following repeated administration at up to 2000 mg/kg/day in a sub-chronic study in the rat or 750 mg/kg/day in a sub-acute study in the dog. No reproductive toxicity occurred at up to 1000 mg/kg/day in the rat. The substance shows no evidence of genotoxicity, has low acute toxicity and no irritation or sensitisation potential. As per the FDA approach an ADI of 20 mg/kg bw can be concluded. Daily exposure from use as a food additive is estimated as up to 11.7 mg/kg bw in adults and 13.3 mg/kg bw in children. In view of the high molecular weight of the substance, its lack of absorption and its low toxicity profile, the ADI is deemed adequate.

Chemical and nanomechanical analysis of rice husk modified by ATRP-grafted oligomer.

Rice husk (RH), an abundant agricultural residue, was reacted with 2-bromoisobutyryl bromide, to convert it to a heterogeneous polyfunctional macroinitiator for Atom Transfer Radical Polymerization (ATRP). The number of active sites placed on the RH surface was small, but they were ATRP active. Non-polar methyl methacrylate (MMA) and polar acrylonitrile (AN) were polymerized from the RH, and a sequential monomer addition was used to prepare an amphiphilic PMMA-b-PAN copolymer on RH surface. FTIR qualitatively confirmed the grafting. Gravimetric and XPS analysis of the different RH surface compositions indicated thin layers of oligomeric PMMA, PAN, and PMMA-b-PAN. The modified surfaces were mapped by nanomechanical AFM to measure surface roughness, and adhesion and moduli using the Derjaguin-Muller-Toropov model. RH grafted with MMA possessed a roughness value of 7.92, and a hard and weakly adhering surface (13.1 GPa and 16.7 nN respectively) while RH grafted with AN yielded a roughness value of 29 with hardness and adhesion values of 4.0 GPa and 23.5 nN. The PMMA-b-PAN modification afforded a surface with a roughness value of 51.5 nm, with hardness and adhesion values of 3.0 GPa and 75.3 nN.

Synthesis of dimethacryloxy ethyl-1,1,6,6-tetrahydro-perfluorohexamethylene-1,6-dicarbamate as dental base monomers and the mechanical properties of the copolymers of the monomer and methyl methacrylate.

To recognize good mechanical properties and water-resistance of a dental resin, dimethacryloxyethyl-1,1,6,6-tetrahydro-perfluoro-hexamethylene-1,6-dicarbamate (FDMHD) was newly synthesized. FDMHD initially was a white powder with m.p. 98.5-99.5°C. The copolymers of FDMHD and methyl methacrylate (MMA), FDMHD/MMA copolymers, were prepared to estimate the basic properties for dental resin materials. The compressive strength of FDMHD/MMA copolymers was almost the same compared with those of the copolymers of Bis-GMA or dimethacryloxyethyl-hexamethylene-1,6-carbamate (DMHD) and MMA. The bending, tensile, diametral tensile, impact strength and toughness of FDMHD/MMA copolymers containing 10.4 mol% FDMHD were higher than those of Bis-GMA/MMA copolymer, and the water sorption of FDMHD/MMA copolymers was lower than those of DMHD/MMA copolymers.

Preparation of an adhesive in emulsion for maxillofacial prosthetic.

Maxillofacial prostheses is a dental medicine specialty aimed at restoring anatomical facial defects caused by cancer, trauma or congenital malformations through an artificial device, which is commonly attached to the skin with the help of an adhesive. The purpose of our research was to develop a pressure-sensitive adhesive (PSA) based on acrylic monomers, characterizing and determining its drying kinetics, that is to say the time it takes to lose 50 to 90% of its moisture. The adhesive synthesis was realized by means of emulsion polymerization; the composition of formulations was: (AA-MMA-EA) and (AA-MMA-2EHA) with different molar ratios. The formulation based on (AA-MMA-2EHA) with 50 w% of solids, presented good adhesive properties such as tack, bond strength, and short drying time. We propose this formulation as a PSA, because it offers an alternative for systemically compromised patients, by less irritation compared to organic solvent-based adhesives.

Effect of film thickness and particle size on cracking stresses in drying latex films.

The stress at which latex films crack during drying was investigated using beam bending. Two systems were investigated: (i) poly(methyl methacrylate/butyl acrylate) particles cast as thin films to examine the effect of film thickness on cracking film stress and (ii) polystyrene particles dried as drops to investigate the effect of particle size. Results indicated an inverse relationship between film thickness and film stress, whilst film stress was shown to be independent of the original particle size. These outcomes were in good agreement with Tirumkudulu and Russel's theoretical analysis [M.S. Tirumkudulu and W.B. Russel, Langmuir 21 (2005) 4938], albeit the measured stress values were almost twice the theoretical estimation.

Immobilization of type-I collagen and basic fibroblast growth factor (bFGF) onto poly (HEMA-co-MMA) hydrogel surface and its cytotoxicity study.

Type-I collagen and bFGF were immobilized onto the surface of poly (HEMA-co-MMA) hydrogel by grafting and coating methods to improve its cytotoxicity. The multi-layered structure of the biocompatible layer was confirmed by FTIR, AFM and static water contact angles. The layers were stable in body-like environment (pH 7.4). Human skin fibroblast cells (HSFC) were seeded onto Col/bFGF-poly (HEMA-co-MMA), Col-poly (HEMA-co-MMA) and poly (HEMA-co-MMA) films for 1, 3 and 5 day. MTT assay was performed to evaluate the extraction toxicity of the materials. Results showed that the cell attachment, proliferation and differentiation on Col/bFGF-poly (HEMA-co-MMA) film were higher than those of the control group, which indicated the improvement of cell-material interaction. The extraction toxicity of the modified materials was also lower than that of the unmodified group. The protein and bFGF immobilized poly (HEMA-co-MMA) hydrogel might hold great promise to be a biocompatible material.

Newly synthesized poly(glycidyl methacrylate-co-3-thienylmethylmethacrylate)-based electrode designs for phenol biosensors.

A newly synthesized poly(glycidyl methacrylate-co-3-thienylmethylmethacrylate) [poly(GMA-co-MTM)] was designed to fabricate various HRP electrodes for detection of phenol derivatives. The results showed that the poly(GMA-co-MTM)/polypyrrole composite film microarchitecture provided a good electroactivity as a result of pyrrole and thiophene interaction, and provided chemical bonds for enzyme immobilization via the epoxy groups of poly(GMA-co-MTM). The glassy carbon-based working electrode displayed significantly higher performance for the same composite film configuration comparing to the gold-based working electrode. Poly(GMA-co-MTM)/polypyrrole/HRP coated glassy carbon electrode exhibited a fast response less than 3s, a high sensitivity (200 nA microM(-1)for hydroquinone), a good operational stability (%RSD values ranged between 2 and 5.1 for all phenolics), a long-term stability (retained about 80% of initial activity at the end of 40th day) and a low detection limit ranging between 0.13 and 1.87 microM for the tested.

A novel biocompatible adhesive incorporating plant-derived monomers.

We describe a new class of biomaterials with potential for a variety of applications in tissue engineering, wound healing, and transdermal drug delivery. These materials are based on oleic methyl ester (OME), which is derived from various plant oils including soybean oil. The OME was acrylated (AOME) and subsequently copolymerized with methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA) to form pressure sensitive adhesives (PSAs). We assessed the cytocompatibility of each PSA product using Alamar Blue and Live/Dead assays. It was found that after 2 h, human fibroblast cells attached on all four of the PSA polymers tested. After 24 h, cell spreading was seen on all materials with the exception of the polymerized AOME product (PAOME). Cells attached to the copolymer PSA products continued to proliferate for up to 2 weeks, as shown by fluorescent confocal microscopy imaging. Finally, a mechanical analysis of each of the copolymers is presented demonstrating that they have a range of mechanical properties and cell adhesiveness depending on the formulation, making them attractive candidates for use as bioactive adhesives.