Olympic Dam: BHP thinking big about the future.

Olympic Dam is one of the world's most significant polymetallic orebodies producing copper, uranium, gold, and silver in remote South Australia. The polymetallic deposit is located 520 km north-northwest of Adelaide, South Australia and has an inferred resource of 2660 Mt at 1.2% Cu, 1.4 kg t-1 U3Os, and 0.5 g t-1 Au. Ore is mined from the underground operation at a rate of approximately 10 mt year-1, and is processed on site through a concentrator and hydrometallurgical facility, smelter, and electrolytic refinery. Olympic Dam is one of the only sites in the world to claim the 'mine to market' title. Protection of the workforce and the environment has been a primary focus for the operations through its 30+ year life and will continue to be into the future. Broken Hill Propriety Company (BHP) believes that its most important asset is its people. With such a large orebody and a very long potential mine life, it is important to think strategically about the future to ensure the viability of the operation. This requires development of mine and surface processing facilities in a staged manner. Importantly, it also involves the development of people. This presentation provides an overview of BHP's work at Olympic Dam and outlines development plans for Olympic Dam into the future.© 2020 ICRP. Published by SAGE.

Shearing resistance of tailing sand waste pollutants mixed with different contents of fly ash.

The co-placement of mine tailings and fly ash (CMF) can reduce acid mine drainage (AMD) production and decrease metal mobilization. This aids in waste management construction. However, few people have studied a large number of tailing sand-fly ash mixtures under the condition of neutral saturated solution in tailing ponds, wherein the pozzolanic reaction is highly gradual. In this study, a series of tests were conducted to determine the monotonic and cyclic shear characteristics of a mixture of fly ash and tailings. In particular, the effects of the fly ash content on the monotonic shear peak, shear strength parameters, dynamic modulus, and damping ratio of the mixture were analyzed. The results reveal that in a monotonic shear test, the peak shear strength of the saturated CMF mixture decreases as the fly ash content increases. The shear strength parameters (cohesion c and internal friction angle φ) were observed to increase and decrease linearly, respectively, as the fly ash content increased. Furthermore, the maximum dynamic shear modulus was observed to decrease by 41.4% as the fly ash content increased from 0 to 50%, during the cyclic cutting process. Moreover, the experimental results fit well with the fitting formula for the variation in shear modulus in the cyclic shear process of the saturated CMF mixture with varying fly ash content. Meanwhile, the initial damping ratio of the cyclic shear was observed to increase from 10.3 to 13.6% as the fly ash content increased. Therefore, when the CMF method is used to treat AMD waste, it is necessary to consider the extent to which the design stability of the tailing pond may be reduced. These experimental results can be used as a reference for similar CMF projects.

Injuries associated with long working hours among employees in the US mining industry: risk factors and adverse outcomes.

OBJECTIVES: The mining industry is increasingly adopting extended workdays of 10-12 hour shifts. Studies demonstrate that long work hours are associated with psychomotor impairments caused by fatigue and an increased risk of injury. However, studies involving miners remain limited. This analysis aimed to identify risk factors associated with long working hour injuries and to determine if long working hour incidents were associated with being killed or incidents involving multiple injured workers. METHODS: Data from US Mine Safety and Health Administration Part 50 reports, 1983-2015, were used to identify long working hour injuries, which were defined as incidents occurring nine or more hours after the start of a shift. RESULTS: A total of 52 206 injuries (9.6%) occurred during long working hours. The proportion of long working hour injuries increased from 5.5% of all injuries in 1983 to its peak in 2015 at 13.9% (p<0.001). Risk factors associated with long working hour injuries included irregular shift starts, being newly employed, employment by a contractor, metal/non-metal operations and mines with <100 employees. In two separate adjusted models, long working hour injuries were associated with a higher odds of death (adjusted OR [aOR]=1.32; 95% CI 1.18 to 1.48) and single incidents resulting in two or more workers injured (aOR=1.73; 95% CI 1.58 to 1.89). CONCLUSIONS: Long working hour injuries were associated with a lack of routine, being new at the mine and specific mining activities. An international shift towards using contract labour and extended workdays indicates that injuries during long working hours will likely continue to grow as a problem in the mining industry.

Those Who Don't Return: Improving Efforts to Address Tuberculosis Among Former Miners in Southern Africa.

Despite increasing awareness regarding the role of oscillating migration in the mining industry as a major driving force in the spread of tuberculosis (TB) throughout southern Africa, very little work has focused on the historical and contextual factors which may contribute to former migrant miners' present-day risk of TB. Most research regarding migration-related and occupational influences on TB has been done on current miners still employed by the mining industry. Through both a historical and contemporary lens, this paper explores and elucidates the need to address the TB epidemic among former migrant mine workers and provides considerations to improve current interventions among this critical population.

Safety culture maturity assessment for mining activities in South America.

BACKGROUND: Health and safety is a crucial issue in the mining industry due to the implication of accidents in the sector. OBJECTIVE: This study determines the safety culture characteristics in several mining activities from South America. METHODS: A survey of the safety culture maturity has been done by means of 24 questions regarding the type of activity, number of employees and safety culture characteristics of the activity: information of accidents and incidents, organizational structure to deal with information, involvement of the company in health and safety issues, the way it communicates accidents and incidents and commitment of the company towards health and safety. RESULTS: The questionnaire was completed by 62 managers from Bolivia, Peru and Colombia. Results show different behaviors depending on the type of company, Artisanal or Large-Scale Mines, ASM and LSM respectively. LSM show a level of maturity according to the size of the company, while ASM does not have a clear trend in terms of size, even though there is a relationship between employees and safety culture maturity. In addition, a remarkable difference can be seen between activities with and without continuous improvement systems implemented. CONCLUSIONS: Large scale mining improves their level of safety culture as the size of the company increases, because procedures and control systems are implemented. Cooperatives or small companies also achieve substantial gains when they introduce similar systems.

Qualitative and quantitative differences between common occupational health risk assessment models in typical industries.

OBJECTIVE: The differences in the methodologies of various occupational health risk assessment (OHRA) models have not been extensively reported. We aimed to understand the qualitative and quantitative differences between common OHRA models in typical industries. METHODS: The Environmental Protection Agency (EPA), Australian, Romanian, Singaporean, International Council on Mining and Metals (ICMM), and the Control of Substances Hazardous to Health (COSHH) models were evaluated, and a theoretical framework was established for a comparative study. RESULTS: Qualitative comparisons showed that each OHRA model had its own strengths and limitations, and exhibited a diverse distribution at different levels for each evaluation indicator. The Singaporean, COSHH, and EPA models had a much higher comprehensive advantage than the other models for all indicators. Quantitative comparisons demonstrated that these three models also had a stronger ability to distinguish the difference in risk ratios between different industries. The Singaporean model had the strongest correlation with the other models. CONCLUSION: Each model possessed its own strengths and limitations depending on its unique methodological principles. Combining the EPA, Singaporean, and COSHH models might be advantageous for developing an OHRA strategy. More studies comparing multiple models in key industries are required.

A systematic review of lost-time injuries in the global mining industry.

BACKGROUND: Mining is a hazardous occupation with elevated rates of lost-time injury and disability. OBJECTIVE: The purpose of this study is twofold: 1) To identify the type of lost-time injuries in the mining workforce, regardless of the kind of mining and 2) To examine the antecedent factors to the occupational injury (lost-time injuries). METHODS: We identified and extracted primary papers related to lost-time injuries in the mining sector by conducting a systematic search of the electronic literature in the eight health and related databases. RESULTS: We critically reviewed nine articles in the mining sector that examined lost-time injuries. Musculoskeletal injuries (hand, back, limbs, fractures, lacerations and muscle contusions), slips and falls were identified as types of lost-time injuries. The review identified the following antecedent factors related to lost-time injuries: the mining work environment (underground mining), being male, age, working with mining equipment, organizational size, falling objects, disease status, job training and lack of occupational safety management teams, recovery time, social supports, access to health services, pre-injury health status and susceptibility to injury. DISCUSSIONS: The mining sector is a hazardous environment that increases workers' susceptibility to occupational injuries. There is a need to create and implement monitoring systems of lost-time injuries to implement prevention programs.

Mass Casualty Incidents in the Underground Mining Industry: Applying the Haddon Matrix on an Integrative Literature Review.

OBJECTIVE: Underground mining is associated with obvious risks that can lead to mass casualty incidents. Information about such incidents was analyzed in an integrated literature review. METHODS: A literature search (1980-2015) identified 564 modern-era underground mining reports from countries sharing similar occupational health legislation. These reports were condensed to 31 reports after consideration of quality grading and appropriateness to the aim. The Haddon matrix was used for structure, separating human factors from technical and environmental details, and timing. RESULTS: Most of the reports were descriptive regarding injury-creating technical and environmental factors. The influence of rock characteristics was an important pre-event environmental factor. The organic nature of coal adds risks not shared in hard-rock mines. A sequence of mechanisms is commonly described, often initiated by a human factor in interaction with technology and step-wise escalation to involve environmental circumstances. Socioeconomic factors introduce heterogeneity. In the Haddon matrix, emergency medical services are mainly a post-event environmental issue, which were not well described in the available literature. The US Quecreek Coal Mine incident of 2002 stands out as a well-planned rescue mission. CONCLUSION: Evaluation of the preparedness to handle underground mining incidents deserves further scientific attention. Preparedness must include the medical aspects of rescue operations. (Disaster Med Public Health Preparedness. 2018;12:138-146).

Using a noise monitoring station in a small quarry located in an urban area.

Mining plays an important role in Brazilian exports. On the other hand, large urban centers like São Paulo, with approximately 21 million inhabitants, also demand an increasing domestic consumption of natural resources, such as construction aggregate. There are many quarries located in the surroundings of urban centers in Brazil, competing with the growth of urbanized areas. Such proximity leads to a series of conflicts involving quarries and surrounding communities, where the increase in noise levels is highlighted. Operations in quarries, in general, are intermittent. Noisier equipment, such as drilling rigs and primary crushers, operates only a few hours during the day, while other operations, such as screening and secondary and tertiary crushing, are more constant. This paper presents a study carried out in a quarry located near São Paulo, where in addition to conventional short term noise measurements at surrounding receptors, one noise monitoring station was installed, allowing to identify the noisiest moments during the quarry operating time. Through data transmitted by wireless technology, it was possible to follow the noise variations emitted from mining activities in real time and observe the noisiest events that were recorded for events that exceeded the established standards. A mobile application associated to this monitoring station facilitated the quarry's manager and employees to access immediately the monitoring information. Therefore, by using this system, it was possible to evaluate the effectiveness of noise reduction measures already taken and indicate what steps still need to be held.

ADA Title I allegations and the Mining, Quarrying, and Oil/Gas Extraction industry.

BACKGROUND: The majority of research about employment discrimination in the U.S. Mining, Quarrying, and Oil/Gas (MQOGE) industries has concentrated on gender and race, while little attention has focused on disability. OBJECTIVE: To explore allegations of Americans with Disabilities Act (ADA) Title I discrimination made to the Equal Employment Opportunity Commission (EEOC) by individuals with disabilities against MQOGE employers. METHODS: Key data available to this study included demographic characteristics of charging parties, size of employers, types of allegations, and case outcomes. Using descriptive analysis, allegation profiles were developed for MQOGE's three main sectors (i.e., Oil/Gas Extraction, Mining except Oil/Gas, and Support Activities). These three profiles where then comparatively analyzed. Lastly, regression analysis explored whether some of the available data could partially predict MQOGE case outcomes. RESULTS: The predominant characteristics of MQOGE allegations were found to be quite similar to the allegation profile of U.S. private-sector industry as a whole, and fairly representative of MQOGE's workforce demographics. Significant differences between MQOGE's three main sector profiles were noted on some important characteristics. Lastly, it was found that MQOGE case outcomes could be partially predicted via some of the available variables. CONCLUSIONS: The study's limitations were presented and recommendations were offered for further research.

[Health state and morbidity of underground mines in mining chemical enterprise in Arctic area of Russian Federation].

The study covered health state of mine workers of "Apatit" enterprise according to periodic medical examination data in 2014. Medical workup covered 1360 miners of main, auxiliary occupations, with assessment of standardized intensive morbidity parameters. The analysis defined the most unfavorable health state of main occupations workers, with leading pathology of locomotory diseases, nervous system (polyneuritis) and ear disorders. These diseases could be caused by specific work conditions characterized by exposure to vibration, noise, intense physical exertion, cooling.

[Features of health disorders in miners employed at northern copper-nickel mines].

The aim of the study was to assess the influence of different working conditions on the health of 1523 copper-nickel miners of the Kola High North. The low degree of mechanization of mining operations was established to be related to more higher levels of vibration, noise and physical overloads. The working in such conditions, when compared with high mining mechanization, leads to a decrease in the number of conditionally healthy workers (12% and 20.7%, p <0.001) an increase in the number of diseases in the one worker (2,94 ± 0,10 and 2.13 ± 0.07 cases, p <0,001), the increase of the risk of occupational diseases (OD) of the musculoskeletal (RR = 2.31) and nervous (RR = 2.07) systems, vibration disease (RR = 1.70), neuro-sensory hearing loss (RR = 1.90). Both at low and high degree of mechanization of mining operations the greatest risk of occupational diseases in noted in drifters (OR = 5.68), at that it was higher at hand mining than at mechanized mining (RR = 1.44). There was made a conclusion about the need to improve the complex of measures for the preservation of health in this group of workers, especially engaged in the performance of tunnel works.

[Effect of recultivated wastes of mining factories on children residing in the district of their location].

Wastes and tailing ponds of Tyrnyauz tungsten and molybdenum factory are the main sources of heavy metal incoming into environment in Kabardino-Balkarian Republic. The factory was closed more than 10 years ago and the recultivation of it's tailing ponds, where accumulated hundreds of millions tones of wastes, was completed. The aim of this investigation was an assessment of their possible influence on children residing in the vicinity of these tailing ponds (village Bylym). Village Verhny Baksan located about 30 km upstream of the valley of the Baksan River was chosen as reference (pure) locality. As a results of the performed investigations we revealed that in drinking water of Bylym and Verhny Baksan concentrations of molybdenum were 2.10±0.42 pg/l and 0.31±0.15 pg/l correspondingly, which is remarkably lower than maximum permitted concentrations. The concentrations of Mo, Cu and Pb in children's hair in both villages were practically the same, which indicates to the absence of their accumulation in human organism. But the quantity of cells with cytogenetic disorders in buccal epithelial cells in children from Bylym was 4.1 times higher in comparison with the corresponding index of uncontaminated area. The obtained data demonstrate that genotoxic effect of remedied tailing ponds retains.

[Evaluation of the content and migration of heavy metals in components of river ecosystems' of mining territories of the Republic of Bashkortostan].

Exploration and development of mineral deposits in the Transurals of the Republic of Bashkortostan are accompanied by a comprehensive environmental impact. Ones of the most vulnerable elements of the landscape are the surface water bodies used for fishery purposes, recreation and household needs of the population. Extraction and processing of ores lead to the contamination of aquatic ecosystems by heavy metals (HM), which by passing into a pond, can actively be involved in the cycling of matter and migrate via food chains to the human under the consumption of fish products. Possessing by cumulative properties, HM can express mutagenic, teratogenic and carcinogenic properties. The aim of research was the study of the impact of mining facilities on the content of the priority HM in the components of river ecosystems in the Transurals of the Republic of Bashkortostan and the development of a complex of preventive measures on the improvement of the human environment. There was studied the content of Zn, Cu and Cd in the water, bottom sediments and phytomass of Elodea canadensis Michx. The measurements of mass concentrations of metals were performed by stripping voltammetry with the use of the STA device. The results showed that for the cross-sections there is typical the following descending series of elements in the river components: Zn > Cu > Cd. In water samples there is observed the exceedance of standards for water bodies of potable, cultural and community water use and fishery basins. The concentration of zinc varies in the range of 0.016-5.24 mg/dm; copper - 0.0024-0.095 mg/dm; cadmium - 0.0001-0.019 mg/dm. In bottom sediments, in general, the content of metals in comparison with control plots is increased to the tenfold value. The meaning of mobile forms of zinc in the ground varies in the range of 0.81-9.62 mg/kg; copper - 0.12-18.69 mg/kg; cadmium - 0.00013-0.092 mg/kg. The zinc concentration in above-ground phytomass of Elodea canadensis compared to control increases by 2-3.5 times, copper - 4-8 times, cadmium - 2-7 times. Univariate analysis of variance confirmed the accuracy of the impact of the degree of contamination on the accumulation of metals by Elodea canadensis. The results testify to the potential danger to health of water bodies of the region's population.

[Hygienic assessment of working conditions and health of the workers of mining and processing enterprises].

In the article there are presented results of studies on the hygienic assessment of working conditions and health status of 1200 workers of mining and processing enterprises (MPE) developing deposits of iron ores of the Kursk Magnetic Anomaly: Lebedinskiy MPE, Mikhaylovskiy MPE, Stoylenskiy MPE. There were revealed the differences in the character and intensity of adverse occupational factors, there was made the quantitation of the occupational risk level to the health workers of MPE both factories and quarries. The structure of occupational diseases in MPE factories is formed by dust lung diseases and the occupational pathology of the organ of hearing. In the structure of professional pathology in quarries workers vibration disease (61.5%) prevails. The obtained results indicate to the need of the development of the system of measures for the reduction in general and occupational morbidity rate of workers, the creation of safe working conditions, improving the early diagnosis of occupational and common diseases at the stage of preliminary and periodic medical examinations.