RESUMEN
An important field of research is the miniaturization of analytical systems for laboratory applications and on-field analysis. In particular, gas chromatography (GC) has benefited from the recent advances in enabling technologies like photolithography, micromachining, hot embossing, and 3D-printing to improve sampling and sample preparation, microcolumn technologies, and detection. In this article, the developments and applications reported since 2015 were reviewed and summarized. Important applications using benchtop instruments, portable GCs, and micro-GCs (µGCs) were showcased to illustrate the current challenges associated with each miniaturized interfaces and systems. For instance, portable instruments need to be energy-efficient and ideally depend on renewable sources for carrier gas generation. Lastly, multidimensional separations were addressed using miniaturized systems to effectively improve the peak capacity of portable systems.
Asunto(s)
Microtecnología , Manejo de Especímenes , Cromatografía de Gases/métodos , Miniaturización/métodosRESUMEN
Background Insertable cardiac monitors (ICMs) are effective in the detection of paroxysmal arrhythmias. In 2014, the first miniaturized ICM was introduced with a less invasive implant technique. The impact of this technology on ICM use in pediatric patients has not been evaluated. We hypothesized an increase in annual pediatric ICM implants starting in 2014 attributable to device miniaturization. Methods and Results A retrospective observational study was conducted using administrative claims from MarketScan Medicaid and commercial insurance claims databases. Use of ICM between January 2013 and December 2018 was measured (normalized to the total enrolled population ≤18 years) and compared with balancing measures (Holter ambulatory monitors, cardiac event monitors, encounters with syncope diagnosis, implantation of implantable cardioverter-defibrillator/pacemaker). Secondary analyses included evaluations of subsequent interventions and complications. The study cohort included 33 532 185 individual subjects, of which 769 (0.002%) underwent ICM implantation. Subjects who underwent ICM implantation were 52% male sex, with a median age of 16 years (interquartile range, 10-17 years). A history of syncope was present in 71%, palpitations in 43%, and congenital heart disease in 28%. Following release of the miniaturized ICM, use of ICMs increased from 5 procedures per million enrollees in 2013 to 11 per million between 2015 and 2018 (P<0.001), while balancing measures remained static. Of 394 subjects with ≥1 year of follow-up after implantation, interventions included catheter ablation in 24 (6%), pacemaker implantation in 15 (4%), and implantable cardioverter-defibrillator implantation in 7 (2%). Conclusions Introduction of the miniaturized ICM was followed by a rapid increase in pediatric use. The effects on outcomes and value deserve further attention.
Asunto(s)
Desfibriladores Implantables , Electrocardiografía Ambulatoria , Adolescente , Arritmias Cardíacas/diagnóstico , Arritmias Cardíacas/epidemiología , Arritmias Cardíacas/terapia , Niño , Electrocardiografía Ambulatoria/métodos , Femenino , Humanos , Masculino , Medicaid , Miniaturización/métodos , SíncopeRESUMEN
High-throughput screening (HTS) is a present-day approach for assaying thousands of cultures in parallel. This miniaturization allows rapid screening of large number of microorganims capable of producing bio-based materials thereby meeting the demands of the ever evolving food, pharmaceutical and cosmetic industry. In this study, agar-based assays for phosphate solubilization, cellulose degradation and lactic acid production were developed in 96-well microplates using Biomek FXP Automated Liquid Handling system. Techno-economic analysis from this study reveals the lower overall cost per assay using HTS as compared to conventional Petri plate assays. Though automated liquid handling workstations have been used to perform liquid-based assays, there are very few studies which report their use for agar-based microplate assays. These findings thus corroborate the establishment of rapid and efficient miniaturized, qualitative agar-based screening methods for identifying microorganisms with potential for commercial application.
Asunto(s)
Bioensayo , Ensayos Analíticos de Alto Rendimiento , Agar , Bioensayo/métodos , Ensayos Analíticos de Alto Rendimiento/métodos , Miniaturización/métodos , FosfatosRESUMEN
Electrochemical biosensors hold the exciting potential to integrate molecular detection with signal processing and wireless communication in a miniaturized, low-cost system. However, as electrochemical biosensors are miniaturized to the micrometer scale, their signal-to-noise ratio degrades and reduces their utility for molecular diagnostics. Studies have reported that nanostructured electrodes can improve electrochemical biosensor signals, but since the underlying mechanism remains poorly understood, it remains difficult to fully exploit this phenomenon to improve biosensor performance. In this work, electrochemical aptamer biosensors on nanoporous electrode are optimized to achieve improved sensitivity by tuning pore size, probe density, and electrochemical measurement parameters. Further, a novel mechanism in which electron transfer is physically accelerated within nanostructured electrodes due to reduced charge screening, resulting in enhanced sensitivity is proposed and experimentally validated. In concert with the increased surface areas achieved with this platform, this newly identified effect can yield an up to 24-fold increase in signal level and nearly fourfold lower limit of detection relative to planar electrodes with the same footprint. Importantly, this strategy can be generalized to virtually any electrochemical aptamer sensor, enabling sensitive detection in applications where miniaturization is a necessity, and should likewise prove broadly applicable for improving electrochemical biosensor performance in general.
Asunto(s)
Técnicas Biosensibles/instrumentación , Técnicas Biosensibles/métodos , Técnicas Electroquímicas/instrumentación , Técnicas Electroquímicas/métodos , Electrodos , Nanopartículas del Metal/química , Transporte de Electrón , Electrones , Diseño de Equipo , Miniaturización/métodosRESUMEN
Gordon Moore famously observed that the number of transistors in state-of-the-art integrated circuits (units per chip) increases exponentially, doubling every 12-24 months. Analysts have debated whether simple exponential growth describes the dynamics of computer processor evolution. We note that the increase encompasses two related phenomena, integration of larger numbers of transistors and transistor miniaturization. Growth in the number of transistors per unit area, or chip density, allows examination of the evolution with a single measure. Density of Intel processors between 1959 and 2013 are consistent with a biphasic sigmoidal curve with characteristic times of 9.5 years. During each stage, transistor density increased at least tenfold within approximately six years, followed by at least three years with negligible growth rates. The six waves of transistor density increase account for and give insight into the underlying processes driving advances in processor manufacturing and point to future limits that might be overcome.
Asunto(s)
Electrónica/tendencias , Transistores Electrónicos/tendencias , Humanos , Miniaturización/métodosRESUMEN
Monolithic polymers are described as continuous and highly porous materials. They have been gaining popularity as an effective extracting phase for some sample preparation methods, due to their variety of functionalities, such as wide pH range tolerance, good permeability, and its ability to allow changes into their surface. Polypyrrole represents an interesting alternative for the modification in extraction phases due to its well related ability to perform multiple interactions, such as acid-base, π - π, ion exchange, interactions with hydrophobic affinities or polar functional groups. Among the different sample preparation techniques, solid-phase extraction (SPE) is one of the most popular and used; a miniaturized version of SPE is the disposable pipette extraction (DPX). DPX is a recent miniaturized extraction technique that usually employing silica-based sorbents inside a pipette tip (5 or 1 mL). The present study proposes the development of a monolithic extraction phase composed by styrene divinylbenzene (1:1) modified with polypyrrole for SPE and DPX techniques. The efficiency of the material was evaluated in face of the extraction of different samples and analytes, triazine herbicides in water and dexamethasone in synthetic synovial liquid by conventional and miniaturized solid-phase extraction techniques. The extractions performed by SPE and DPX presented absolute recovery values ranging from 74.8 to 105.0%, inter-day precision ranging from 0.6 to 14.0%, and limit of quantification of 0.5 and 5.0 ng.mL-1, respectively. The DPX miniaturized method exhibited results equivalent to the methods reported in the literature for extraction of dexamethasone in synovial fluid samples. Moreover, this technique proved to be quicker and cheaper than SPE, and produced fewer residual volumes, supporting the preference for green chemistry. Monolithic polymers modified with polypyrrole presented to be a feasible alternative extraction phase for miniaturized sample preparation techniques.
Asunto(s)
Métodos Analíticos de la Preparación de la Muestra , Miniaturización/métodos , Polímeros/aislamiento & purificación , Pirroles/aislamiento & purificación , Adsorción , Interacciones Hidrofóbicas e Hidrofílicas , Nitrógeno/química , Polimerizacion , Extracción en Fase Sólida , Espectroscopía Infrarroja por Transformada de Fourier , Temperatura , Agua/química , Contaminantes Químicos del Agua/análisisRESUMEN
Analytical methods such as liquid chromatography (LC) and mass spectrometry (MS) are widely used techniques for the analyses of different classes of compounds. This is due to their highlighted capacity for separating and identifying components in complex matrices such food samples. However, in most cases, effective analysis of the target analyte becomes challenging due to the complexity of the sample, especially for quantification of trace concentrations. In this case, miniaturized sample preparation methods have been used as a strategy for analysis of complex matrices. This involves removing the interferents and concentrating the analytes in a sample. These methods combine simplicity and effectiveness and given their miniaturized scale, they are in accordance with green chemistry precepts. Besides, ambient mass spectrometry represents a new trend in fast and rapid analyses, especially for qualitative and screening analysis. However, for complex matrix analyses, sample preparation is still a difficult step and the miniaturized sample preparation techniques show great potential for an improved and widespread use of ambient mass spectrometry techniques. . This review aims to contribute as an overview of current miniaturized sample preparation techniques and ambient mass spectrometry methods as different approaches for selective and sensitive analysis of residues in food samples.
Asunto(s)
Análisis de los Alimentos/métodos , Espectrometría de Masas/métodos , Miniaturización/métodos , Cromatografía Liquida/métodos , Concentración de Iones de Hidrógeno , Microextracción en Fase Líquida , TemperaturaRESUMEN
We have developed a miniature two-photon microscope equipped with an axial scanning mechanism and a long-working-distance miniature objective to enable multi-plane imaging over a volume of 420 × 420 × 180 µm3 at a lateral resolution of ~1 µm. Together with the detachable design that permits long-term recurring imaging, our miniature two-photon microscope can help decipher neuronal mechanisms in freely behaving animals.
Asunto(s)
Encéfalo/diagnóstico por imagen , Encéfalo/fisiología , Microscopía de Fluorescencia por Excitación Multifotónica/métodos , Miniaturización/métodos , Neuroimagen/métodos , Animales , Conducta Animal , Encéfalo/citología , Técnicas Citológicas , Locomoción , Masculino , Ratones , Ratones Endogámicos C57BLRESUMEN
OBJECTIVE: To evaluate the effects of location of the tip of percutaneous sheath and nephroscope in the collecting system together with active aspiration on the Intrapelvic pressure measurements (IPP) during miniaturized percutaneous nephrolithotomy (miniPNL). MATERIALS AND METHODS: The data of 20 patients underwent miniPNL in supine position was collected prospectively. IPP measurements were done with an 8 Fr urodynamic pressure measurement catheter in 4 different settings with respect to location of tip of sheath and nephroscope. All 4 settings were repeated with active aspiration. Totally measurements were done and compared in 8 different settings for 90 seconds in each patient. RESULTS: Highest mean IPP measurements were recorded in setting II (35.3 ± 11.8 cm H2O) where the sheath was located in the calyx and the tip of the nephroscope was in the renal pelvis. When active aspiration was applied, the mean pressure measurements were significantly lower than the counterpart settings without aspiration (all P values <.0001). When the active aspiration was applied, intrarenal pressure measurements did not exceed 40 cm H2O in any settings in any of the patients. CONCLUSION: Location of the tip of the sheath and the nephroscope has significant effect on IPP measurements. Active aspiration significantly lowers the IPP and keeps it <40 cm H2O. Endourologists should be aware of possible alterations in IPP during miniPNL and active aspiration should be kept in mind as an effective solution to decrease the risk of complications related to high IPP.
Asunto(s)
Diseño de Equipo , Nefrolitiasis , Nefrostomía Percutánea , Ureteroscopios , Urodinámica , Femenino , Humanos , Presión Hidrostática , Masculino , Persona de Mediana Edad , Miniaturización/métodos , Nefrolitiasis/diagnóstico , Nefrolitiasis/cirugía , Nefrolitotomía Percutánea/instrumentación , Nefrolitotomía Percutánea/métodos , Nefrostomía Percutánea/instrumentación , Nefrostomía Percutánea/métodos , Succión/instrumentación , Succión/métodosRESUMEN
Faced with ageing infrastructure and ever-increasing demands from hit discovery and lead optimisation functions, AstraZeneca has chosen to develop innovative technologies and process solutions to support the future of drug discovery. These include the miniaturisation of compound storage tubes for high-density storage and rapid access to the corporate collection for feeding samples to the predicted tripling number of high throughput screening (HTS) campaigns. The acoustically- compatible tubes also enable the first fully-acoustic plate production process for faster sample supply to screening with less waste and continued high quality. Operating at a smaller scale reduces compound synthesis, storage, and consumption, prompting miniaturisation of upstream chemistry and downstream biological assays, while offering a transformative and sustainable solution to many drug discovery issues applicable across the industry.
Asunto(s)
Descubrimiento de Drogas/tendencias , Ensayos Analíticos de Alto Rendimiento , Bibliotecas de Moléculas Pequeñas/análisis , Automatización/métodos , Química Farmacéutica/tendencias , Técnicas Químicas Combinatorias/instrumentación , Técnicas Químicas Combinatorias/métodos , Industria Farmacéutica/tendencias , Ensayos Analíticos de Alto Rendimiento/instrumentación , Ensayos Analíticos de Alto Rendimiento/métodos , Humanos , Miniaturización/métodos , Mejoramiento de la Calidad , Tecnología Farmacéutica/tendencias , Flujo de TrabajoRESUMEN
A sampling, modulation, and separation (SMS) unit was tested for detection of hazardous chemicals. The SMS unit, designed and developed for on-site sampling and analysis, consists of a dynamic inlet system coupled with a fast, miniaturized gas chromatograph (GC). Feasibility of the SMS unit was evaluated together with a hazardous chemical vapor generator. The performance of the SMS unit was tested with automated thermal desorption after SMS to collect samples for GC-mass spectrometry (GC-MS) measurements. Detection of sarin nerve agent was verified. Additionally, the vapor generator was connected to the SMS unit, which was hyphenated with a photoionization detector (PID), thus creating a fast GC-PID system. This system gave a positive response for degradation products of sulfur mustard, thereby indicating suitability of the SMS-PID unit for field drone applications.
Asunto(s)
Sustancias Peligrosas/química , Sustancias Peligrosas/aislamiento & purificación , Espectrometría de Masas/métodos , Miniaturización/métodos , Temperatura , Factores de Tiempo , VolatilizaciónRESUMEN
Most microinsects have feather-like bristled wings, a state known as ptiloptery, but featherwing beetles (family Ptiliidae) are unique among winged microinsects in their ability to fold such wings. An asymmetrical wing folding pattern, found also in the phylogenetically related rove beetles (Staphylinidae), was ancestral for Ptiliidae. Using scanning electron, confocal laser scanning, and optical microscopy, high-speed video recording, and 3D reconstruction, we analyze in detail the symmetrical wing folding pattern and the mechanism of the folding and unfolding of the wings in Acrotrichis sericans (Coleoptera: Ptiliidae) and show how some of the smaller featherwing beetles have reverted to strict symmetry in their wing folding. The wings are folded in three phases by bending along four lines (with the help of wing folding patches on the abdominal tergites) and locked under the closed elytra; they unfold passively in two phases, apparently with the help of the elasticity provided by resilin unevenly distributed in the wing and of convexities forming in the cross-sections of the unfolding wing, making it stiffer. The minimum duration of folding is 3.5 s; unfolding is much more rapid (minimum duration lowest recorded in beetles, 0.038 s). The folding ratio of A. sericans is 3.31 (without setae), which is greater than in any beetle in which it has been measured. The symmetrical wing folding pattern found in A. sericans and in all of the smallest ptiliids, in which ptiloptery is especially pronounced, is the only known example of symmetry re-established during miniaturization. This direction of evolution is remarkable because miniaturization is known to result in various asymmetries, while in this case miniaturization was accompanied by reversal to symmetry, probably associated with the evolution of ptiloptery. Our results on the pattern and mechanisms of wing folding and unfolding can be used in robotics for developing miniature biomimetic robots: the mechanisms of wing folding and unfolding in Ptiliidae present a challenge to engineers who currently work at designing ever smaller flying robots and may eventually produce miniature robots with foldable wings.
Asunto(s)
Escarabajos/fisiología , Alas de Animales/fisiología , Animales , Biomimética/métodos , Escarabajos/metabolismo , Vuelo Animal/fisiología , Proteínas de Insectos/metabolismo , Miniaturización/métodos , Filogenia , Robótica/métodos , Sensilos/metabolismo , Sensilos/fisiología , Alas de Animales/metabolismoRESUMEN
BACKGROUND: Miniaturization of biochemical reaction volumes within artificial microcompartments has been the key driver for directed evolution of several catalysts in the past two decades. Typically, single cells are co-compartmentalized within water-in-oil emulsion droplets with a fluorogenic substrate whose conversion allows identification of catalysts with improved performance. However, emulsion droplet-based technologies prevent cell proliferation to high density and preclude the feasibility of biochemical reactions that require the exchange of small molecule substrates. Here, we report on the development of a high-throughput screening method that addresses these shortcomings and that relies on a novel selective permeable polymer hydrogel microcapsule. RESULTS: Hollow-core polyelectrolyte-coated chitosan alginate microcapsules (HC-PCAMs) with selective permeability were successfully constructed by jet break-up and layer-by-layer (LBL) technology. We showed that HC-PCAMs serve as miniaturized vessels for single cell encapsulation, enabling cell growth to high density and cell lysis to generate monoclonal cell lysate compartments suitable for high-throughput analysis using a large particle sorter (COPAS). The feasibility of using HC-PCAMs as reaction compartments which exchange small molecule substrates was demonstrated using the transpeptidation reaction catalyzed by the bond-forming enzyme sortase F from P. acnes. The polyelectrolyte shell surrounding microcapsules allowed a fluorescently labelled peptide substrate to enter the microcapsule and take part in the transpeptidation reaction catalyzed by the intracellularly expressed sortase enzyme retained within the capsule upon cell lysis. The specific retention of fluorescent transpeptidation products inside microcapsules enabled the sortase activity to be linked with a fluorescent readout and allowed clear separation of microcapsules expressing the wild type SrtF from those expressing the inactive variant. CONCLUSION: A novel polymer hydrogel microcapsule-based method, which allows for high-throughput analysis based on encapsulation of single cells has been developed. The method has been validated for the transpeptidation activity of sortase enzymes and represents a powerful tool for screening of libraries of sortases, other bond-forming enzymes, as well as of binding affinities in directed evolution experiments. Moreover, selective permeable microcapsules encapsulating microcolonies provide a new and efficient means for preparing novel caged biocatalyst and biosensor agents.
Asunto(s)
Alginatos/química , Cápsulas/química , Quitosano/química , Escherichia coli/enzimología , Ensayos Analíticos de Alto Rendimiento/métodos , Miniaturización/métodos , Aminoaciltransferasas/química , Catálisis , Materiales Biocompatibles Revestidos/química , Cisteína Endopeptidasas/química , Proteínas de Escherichia coli/química , Hidrogeles/química , Permeabilidad , Plásmidos , Polielectrolitos/química , Polímeros/químicaRESUMEN
In order to overcome the challenges associated with a limited number of airway epithelial cells that can be obtained from clinical sampling and their restrained capacity to divide ex vivo, miniaturization of respiratory drug discovery assays is of pivotal importance. Thus, a 96-well microplate system was developed where primary human small airway epithelial (hSAE) cells were cultured at an air-liquid interface (ALI). After four weeks of ALI culture, a pseudostratified epithelium containing basal, club, goblet and ciliated cells was produced. The 96-well ALI cultures displayed a cellular composition, ciliary beating frequency, and intercellular tight junctions similar to 24-well conditions. A novel custom-made device for 96-parallelized transepithelial electric resistance (TEER) measurements, together with dextran permeability measurements, confirmed that the 96-well culture developed a tight barrier function during ALI differentiation. 96-well hSAE cultures were responsive to transforming growth factor ß1 (TGF-ß1) and tumor necrosis factor α (TNF-α) in a concentration dependent manner. Thus, the miniaturized cellular model system enables the recapitulation of a physiologically responsive, differentiated small airway epithelium, and a robotic integration provides a medium throughput approach towards pharmaceutical drug discovery, for instance, in respect of fibrotic distal airway/lung diseases.
Asunto(s)
Bronquiolos/citología , Células Epiteliales/citología , Miniaturización/instrumentación , Miniaturización/métodos , Modelos Biológicos , Aire , Automatización , Biomarcadores/metabolismo , Células Cultivadas , Fibrosis , Humanos , Mucosa Respiratoria/citologíaRESUMEN
Synthetic opioids are responsible for numerous overdoses and fatalities worldwide. Currently, fentanyl and its analogs are also mixed with heroin, cocaine and methamphetamine, or sold as oxycodone, hydrocodone and alprazolam in counterfeit medications. Microextraction techniques became more frequent in analytical toxicology over the last decade. A method to simultaneously quantify nine synthetic opioids, fentanyl, sufentanil, alfentanil, acrylfentanyl, thiofentanyl, valerylfentanyl, furanylfentanyl, acetyl fentanyl and carfentanil, and two metabolites, norfentanyl and acetyl norfentanyl, in urine samples by microextraction with packed sorbent (MEPS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed and validated. A multivariate optimization was performed to establish the number and speed (stroke) of draw-eject sample cycles and the extraction solvent. The best extraction condition was eight draw-eject sample cycles, with a velocity of 3.6 µL/sec and acetonitrile as elution solvent. Linearity was achieved between 1 to 100 ng/mL, with a limit of detection (LOD) of 0.1 ng/mL and limit of quantification (LOQ) of 1 ng/mL. Imprecision (% relative standard deviation) and bias (%) were less than 12.8% and 5.7%, respectively. The method had good specificity and selectivity when challenged with 10 different matrix sources and 36 pharmaceuticals and drugs of abuse at concentrations of 100 or 500 ng/mL. The method was successfully applied to authentic urine samples. MEPS was an efficient semi-automatic extraction technique, requiring small volumes of organic solvents (640 µL) and sample (200 µL). The cartridges can be cleaned and reused (average of 150 sample extractions/barrel inside and needle).
Asunto(s)
Analgésicos Opioides/orina , Cromatografía Liquida/métodos , Miniaturización/métodos , Microextracción en Fase Sólida/métodos , Espectrometría de Masas en Tándem/métodos , Analgésicos Opioides/química , Cromatografía Líquida de Alta Presión/métodos , Fentanilo/orina , Humanos , Límite de Detección , Solventes/químicaRESUMEN
INTRODUCTION: The miniaturization of blood pumps has become a trend due to the advantage of easier transplantation, especially for pediatric patients. In small-scale pumps, it is much easier and more cost-efficient to manufacture the impeller with straight blades compared to spiral-profile blades. METHODS: Straight-blade impeller designs with different blade angles, blade numbers, and impeller flow passage positions are evaluated using the computational fluid dynamics method. Blade angles (θ = 0°, 20°, 30°, and 40°), blade numbers (N = 5, 6, 7, and 8), and three positions of impeller flow passage (referred to as top, middle, and bottom) are selected as the studied parametric values. RESULTS: The numerical results reveal that with increasing blade angle, the pressure head and the hydraulic efficiency increase, and the average scalar shear stress and the normalized index of hemolysis decrease. The minimum radial force and axial thrust are obtained when θ equals 20°. In addition, the minimum average scalar shear stress and normalized index of hemolysis values are obtained when N = 6, and the maximum values are obtained when N = 5. Regarding the impeller flow passage position, the axial thrust and the stagnation area forming in the impeller eye are reduced as the flow passage height declines. CONCLUSION: The consideration of a blade angle can greatly improve the performance of blood pumps, although the influence of the blade number is not very easily determined. The bottom position of the impeller flow passage is the best design.
Asunto(s)
Circulación Asistida/instrumentación , Corazón Auxiliar/efectos adversos , Hemólisis , Hidrodinámica , Centrifugación/instrumentación , Diseño Asistido por Computadora , Diseño de Equipo , Humanos , Miniaturización/métodos , Estrés MecánicoRESUMEN
We report a miniaturized filter aided sample preparation method (micro-FASP) for low-loss preparation of submicrogram proteomic samples. The method employs a filter with â¼0.1 mm2 surface area, reduces the total volume of reagents to <10 µL, and requires only two sample transfer steps. The method was used to generate 25â¯883 unique peptides and 3069 protein groups from 1000 MCF-7 cells (â¼100 ng protein content), and 13â¯367 peptides and 1895 protein groups were identified from 100 MCF-7 cells (â¼10 ng protein content). Single blastomeres from Xenopus laevis embryos at the 50-cell stage (â¼200 ng yolk free protein/blastomere) generated 20â¯943 unique peptides and 2597 protein groups; the proteomic profile clearly differentiated left and right blastomeres and provides strong support for models in which this asymmetry is established early in the embryo. The parallel processing of 12 samples demonstrates reproducible label free quantitation of 1 µg protein homogenates.
Asunto(s)
Métodos Analíticos de la Preparación de la Muestra/métodos , Embrión no Mamífero/metabolismo , Filtración , Límite de Detección , Miniaturización/métodos , Proteómica , Xenopus laevis/embriología , Animales , Recuento de CélulasRESUMEN
A fast method for analysis of 47 pharmaceuticals active compounds (PhACs) in fish muscle has been developed and validated addressing the parameters accuracy, precision (intraday and interday), matrix effect at three spiking levels: 5, 25 and 50 ng PhAC g-1 in fish as well as linearity, limit of detection (LOD), limit of quantification (LOQ). Sixteen protocols were performed varying extraction techniques, solvents, sample filtration and clean-up step. The selected method was based on an ultrasound extraction with acidified mixture of acetonitrile and isopropyl alcohol followed by a clean-up step using Z-Sep/C18 sorbents. Quantitative analysis of the PhACs in the extracts was accomplished by UPLC- QTOF-MS using Sequential Window Acquisition of All Theoretical Fragment-Ion, SWATHTM acquisition technology. 90% Of the compounds presented extraction recoveries between 60 and 130% with LOQ between 0.2 and 11 ng g-1. The validated method was applied to the analysis of 32 muscle samples from thirteen different species of fish collected in four European river basins (Adige, Evrotas, Llobregat and Sava). A total of ten compounds were found in fish samples with diltiazem as the most frequently detected one followed by carbamazepine and caffeine. Additionally, by taking advantage of the information-rich mass spectral data from the SWATH mode acquisition, the raw data were reprocessed for the presence of the most prescribed 250 pharmaceuticals, metabolites, and drugs of abuse previously reported to occur in the aquatic environment. By considering the mass errors of the molecular ion (˱ 3 ppm) and one characteristic fragment ion (˱10 ppm) as well as the Library score and the Formula Finder score of the data processing software six compounds were retrieved, and eventually four of them confirmed with authentic standards: cocaine and its metabolite benzoylecgonine, the stimulant nicotine, and the antibiotic ofloxacin. Two lipid regulators, lovastatin and simvastatin, were determined as a false positive.
Asunto(s)
Monitoreo del Ambiente , Peces/metabolismo , Miniaturización/métodos , Preparaciones Farmacéuticas/análisis , Ríos , Animales , Cromatografía Liquida/métodos , Iones , Límite de Detección , Reproducibilidad de los ResultadosRESUMEN
OBJECTIVE: Therapeutic applications of implantable active medical devices have improved the quality of patient life. Numerous on-going research in the field of neuromodulation and bioelectronic medicine are exploring the use of these implants for treating diseases and conditions. Miniaturized implantable medical devices that are wirelessly powered by ultrasound (US) can be placed close to the target sites deep inside the body for effective therapy with less invasiveness. In this study, we assessed the long-term in vivo performance of miniaturized US powered implants (UPI) using a rodent model. APPROACH: Prototype UPI devices were implanted in rodents and powered wirelessly using an unfocused US transmitter over 12 weeks, and the corresponding device output was recorded. Structural integrity of UPI before and after implantation was studied using scanning electron microscopy (SEM). We also conducted qualitative histological assessment of skin and muscle surrounding the UPI and compared it to naïve control and US exposed tissues. MAIN RESULTS: We found that it is feasible to power UPI devices wirelessly with US over long-term. The encapsulation of UPIs did not degrade over time and the tissues surrounding the UPI were comparable to both naïve control and US exposed tissues. SIGNIFICANCE: This study is the first to assess the long-term performance of miniaturized UPI devices using a rodent model over 12-weeks. The set of tests used in this study can be extended to assess other US-powered miniaturized implants.
Asunto(s)
Electrodos Implantados , Diseño de Equipo/métodos , Miniaturización/métodos , Músculo Esquelético/diagnóstico por imagen , Músculo Esquelético/fisiología , Animales , Diseño de Equipo/instrumentación , Femenino , Humanos , Microelectrodos , Miniaturización/instrumentación , Ratas , Ratas Endogámicas LewRESUMEN
OBJECTIVE: Concealable, miniaturized electroencephalography (mini-EEG) recording devices are crucial enablers toward long-term ambulatory EEG monitoring. However, the resulting miniaturization limits the inter-electrode distance and the scalp area that can be covered by a single device. The concept of wireless EEG sensor networks (WESNs) attempts to overcome this limitation by placing a multitude of these mini-EEG devices at various scalp locations. We investigate whether optimizing the WESN topology can compensate for miniaturization effects in an auditory attention detection (AAD) paradigm. METHODS: Starting from standard full-cap high-density EEG data, we emulate several candidate mini-EEG sensor nodes that locally collect EEG data with embedded electrodes separated by short distances. We propose a greedy group-utility based channel selection strategy to select a subset of these candidate nodes to form a WESN. We compare the AAD performance of this WESN with the performance obtained using long-distance EEG recordings. RESULTS: The AAD performance using short-distance EEG measurements is comparable to using an equal number of long-distance EEG measurements if, in both cases, the optimal electrode positions are selected. A significant increase in performance was found when using nodes with three electrodes over nodes with two electrodes. CONCLUSION: When the nodes are optimally placed, WESNs do not significantly suffer from EEG miniaturization effects in the case of AAD. SIGNIFICANCE: WESN-like platforms allow us to achieve similar AAD performance as with long-distance EEG recordings while adhering to the stringent miniaturization constraints for ambulatory EEG. Their applicability in an AAD task is important for the design of neuro-steered auditory prostheses.