Design and Synthesis of Mucin-Inspired Glycopolymers.

Mucins are bottlebrush biopolymers that are glycoproteins on the surfaces of cells and as hydrogels secreted inside and outside the body. Mucin function in biology includes cell-cell recognition, signaling, protection, adhesion, and lubrication. Because of their attractive and diverse properties, mucins have recently become the focus of synthetic efforts by researchers who hope to understand and emulate these biomaterials. This review is focused on the development of methodologies for preparing mucin-inspired synthetic oligomers and glycopolymers, including solid-phase synthesis, polymerization of glycosylated monomers, and post-polymerization grafting of glycans to polymer chains. How these synthetic mucins have been used in health applications is discussed. Natural mucins are formed from a conserved set of monomers that are combined into chains of different sequences and lengths to achieve materials with widely diverse properties. Adopting this design paradigm from natural mucins could lead to next-generation bioinspired synthetic materials.

Products of Chemoenzymatic Synthesis Representing MUC1 Tandem Repeat Unit with T-, ST- or STn-antigen Revealed Distinct Specificities of Anti-MUC1 Antibodies.

Anti-mucin1 (MUC1) antibodies have long been used clinically in cancer diagnosis and therapy and specific bindings of some of them are known to be dependent on the differential glycosylation of MUC1. However, a systematic comparison of the binding specificities of anti-MUC1 antibodies was not previously conducted. Here, a total of 20 glycopeptides including the tandem repeat unit of MUC1, APPAHGVTSAPDTRPAPGSTAPPAHGV with GalNAc (Tn-antigen), Galß1-3GalNAc (T-antigen), NeuAcα2-3Galß1-3GalNAc (sialyl-T-antigen), or NeuAcα2-6GalNAc (sialyl-Tn-antigen) at each threonine or serine residue were prepared by a combination of chemical glycopeptide synthesis and enzymatic extension of carbohydrate chains. These glycopeptides were tested by the enzyme-linked immunosorbent assay (ELISA) for their capacity to bind 13 monoclonal antibodies (mAbs) known to be specific for MUC1. The results indicated that anti-MUC1 mAbs have diverse specificities but can be classified into a few characteristic groups based on their binding pattern toward glycopeptides in some cases having a specific glycan at unique glycosylation sites. Because the clinical significance of some of these antibodies was already established, the structural features identified by these antibodies as revealed in the present study should provide useful information relevant to their further clinical use and the biological understanding of MUC1.

Synthetic oral mucin mimic from polymer micelle networks.

Mucin networks are formed in the oral cavity by complexation of glycoproteins with other salivary proteins, yielding a hydrated lubricating barrier. The function of these networks is linked to their structural, chemical, and mechanical properties. Yet, as these properties are interdependent, it is difficult to tease out their relative importance. Here, we demonstrate the ability to recreate the fibrous like network through a series of complementary rinses of polymeric worm-like micelles, resulting in a 3-dimensional (3D) porous network that can be deposited layer-by-layer onto any surface. In this work, stability, structure, and microbial capture capabilities were evaluated as a function of network properties. It was found that network structure alone was sufficient for bacterial capture, even with networks composed of the adhesion-resistant polymer, poly(ethylene glycol). The synthetic networks provide an excellent, yet simple, means of independently characterizing mucin network properties (e.g., surface chemistry, stiffness, and pore size).

A convergent strategy for the synthesis of type-1 elongated mucin cores 1-3 and the corresponding glycopeptides.

Mucins are a class of highly O-glycosylated proteins found on the surface of cells in epithelial tissues. O-Glycosylation is crucial for the functionality of mucins and changes therein can have severe consequences for an organism. With that in mind, the elucidation of interactions of carbohydrate binding proteins with mucins, whether in morbidly altered or unaltered conditions, continue to shed light on mechanisms involved in diseases like chronic inflammations and cancer. Despite the known importance of type-1 and type-2 elongated mucin cores 1-4 in glycobiology, the corresponding type-1 structures are much less well studied. Here, the first chemical synthesis of extended mucin type-1 O-glycan core 1-3 amino acid structures based on a convergent approach is presented. By utilizing differentiation in acceptor reactivity, shared early stage Tn- and T-acceptor intermediates were elongated with a common type-1 [ß-D-Gal-1,3-ß-D-GlcNAc] disaccharide, which allows for straightforward preparation of diverse glycosylated amino acids carrying the type-1 mucin core 1-3 saccharides. The obtained glycosylated 9-fluorenylmethoxycarbonyl (Fmoc)-protected amino acid building blocks were employed in synthesis of type-1 mucin glycopeptides, which are useful in biological applications.

A unified strategy for the synthesis of mucin cores 1-4 saccharides and the assembled multivalent glycopeptides.

By displaying different O-glycans in a multivalent mode, mucin and mucin-like glycoproteins are involved in a plethora of protein binding events. The understanding of the roles of the glycans and the identification of potential glycan binding proteins are major challenges. To enable future binding studies of mucin glycan and glycopeptide probes, a method that gives flexible and efficient access to all common mucin core-glycosylated amino acids was developed. Based on a convergent synthesis strategy starting from a shared early stage intermediate by differentiation in the glycoside acceptor reactivity, a common disaccharide building block allows for the creation of extended glycosylated amino acids carrying the mucin type-2 cores 1-4 saccharides. Formation of a phenyl-sulfenyl-N-Troc (Troc=trichloroethoxycarbonyl) byproduct during N-iodosuccinimide-promoted thioglycoside couplings was further characterized and a new methodology for the removal of the Troc group is described. The obtained glycosylated 9-fluorenylmethoxycarbonyl (Fmoc)-protected amino acid building blocks are incorporated into peptides for multivalent glycan display.

An efficient approach for the characterization of mucin-type glycopeptides: the effect of O-glycosylation on the conformation of synthetic mucin peptides.

Despite the growing importance of mucin core O-glycosylation in many biological processes including the protection of epithelial cell surfaces, the immune response, cell adhesion, inflammation, and tumorigenesis/metastasis, the regulation mechanism and conformational significance of the multiple introduction of α-GalNAc residues by UDP-GalNAc:polypeptide N-acetylgalactosaminyltransferases (ppGalNAcTs) remains unclear. Here we report an efficient approach by combining MS and NMR spectroscopy that allows for the identification of O-glycosylation site(s) and the effect of O-glycosylation on the peptide backbone structures during enzymatic mucin domain assembly by using an isoform UDP-GalNAc:polypeptide N-acetylgalactosaminyltransferase-T2 (ppGalNAcT2) in vitro. An electron-capture dissociation device in a linear radio-frequency quadrupole ion trap (RFQ-ECD) combined with a time-of-flight (TOF) mass spectrometer was employed for the identification of Thr/Ser residues occupied by α-GalNAc branching among multiple and potential O-glycosylation sites in the tandem repeats of human mucin glycoproteins MUC4 (Thr-Ser-Ser-Ala-Ser-Thr-Gly-His-Ala-Thr-Pro-Leu-Pro-Val-Thr-Asp) and MUC5AC (Pro-Thr-Thr-Val-Gly-Ser-Thr-Thr-Val-Gly). In the present study, O-glycosylation was initiated specifically at Thr10 in naked MUC4 peptide and additional introduction of α-GalNAc proceeded preferentially but randomly at three other Thr residues to afford densely glycosylated MUC4 containing six α-GalNAc residues at Thr1, Ser2, Ser5, Thr6, Thr10, and Thr15. On the contrary, O-glycosylation of naked MUC5AC peptide occurred predominantly at consecutive Thr residues and led to MUC5AC with four α-GalNAc residues at Thr2, Thr3, Thr7, and Thr8. The solution structures determined by NMR spectroscopic studies elicited that the preferential introduction of α-GalNAc at Thr10 of MUC4 stabilizes specifically a ß-like extended backbone structure at this area, whereas other synthetic models with a single α-GalNAc residue at Thr1, Thr6, or Thr15 did not exhibit any converged three-dimensional structure at the proximal peptide moiety. Such conformational impact on the underlying peptides was proved to be remarkable in the glycosylation at the consecutive Thr residues of MUC5AC.

Control of the molecular orientation of membrane-anchored biomimetic glycopolymers.

Quantifying and controlling the orientation of surface-bound macromolecules is crucial to a wide range of processes in areas as diverse as biology, materials science, and nanotechnology. Methods capable of directing orientation, as well as an understanding of the underlying physical mechanisms are, however, lacking. In this paper, we describe experiments in which the conformations of structurally well-defined polymers anchored to fluid lipid membranes were probed using Fluorescence Interference Contrast Microscopy (FLIC), an optical technique that provides topographic information with few-nanometer precision. The novel rodlike polymers mimic the architecture of mucin glycoproteins and feature a phospholipid tail for membrane incorporation and a fluorescent optical probe for FLIC imaging situated at the opposite termini of the densely glycosylated polymeric backbones. We find that the orientation of the rigid, approximately 30 nm long glycopolymers depends profoundly on the properties of the optical reporter. Molecules terminated with Alexa Fluor 488 projected away from the lipid bilayer by 11 +/- 1 nm, consistent with entropy-dominated sampling of the membrane-proximal space. Molecules terminated with Texas Red lie flat at the membrane (height, 0 +/- 2 nm), implying that interactions between Texas Red and the bilayer dominate the polymers' free energy. These results demonstrate the design of macromolecules with specific orientational preferences, as well as nanometer-scale measurement of their orientation. Importantly, they reveal that seemingly minute changes in molecular structure, in this case fluorophores that comprise only 2% of the total molecular weight, can significantly alter the molecule's presentation to the surrounding environment.

Noncovalent cell surface engineering: incorporation of bioactive synthetic glycopolymers into cellular membranes.

The controlled addition of structurally defined components to live cell membranes can facilitate the molecular level analysis of cell surface phenomena. Here we demonstrate that cell surfaces can be engineered to display synthetic bioactive polymers at defined densities by exogenous membrane insertion. The polymers were designed to mimic native cell-surface mucin glycoproteins, which are defined by their dense glycosylation patterns and rod-like structures. End-functionalization with a hydrophobic anchor permitted incorporation into the membranes of live cultured cells. We probed the dynamic behavior of cell-bound glycopolymers bearing various hydrophobic anchors and glycan structures using fluorescence correlation spectroscopy (FCS). Their diffusion properties mirrored those of many natural membrane-associated biomolecules. Furthermore, the membrane-bound glycopolymers were internalized into early endosomes similarly to endogenous membrane components and were capable of specific interactions with protein receptors. This system provides a platform to study cell-surface phenomena with a degree of chemical control that cannot be achieved using conventional biological tools.

Efficient synthesis of MUC4 sialylglycopeptide through the new sialylation using 5-acetamido-neuraminamide donors.

Sialylation reactions using a new sialyl donor, diethyl 5-acetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-2-O-beta-D-glycero-D-galacto-2-nonulopyranosylonamide phosphite (Neu5Ac-1-amide-2-phosphite) derivatives, and the synthesis of the sialyl-T N-MUC4 glycopeptide are described. The sialylation was performed in CH2Cl2 solvent toward the 6-hydroxyl group of several monosugar acceptors and generated alpha-sialoside in good yield under low temperature and TMSOTf activation system. Amide derivatives of sialoside were easily converted into naturally occurring sialoside after hydrolysis of the amide group. Sialyl-alpha(2,6)-GalN3 was also prepared by this new sialylation protocol, and then this sialoside was further converted into a Fmoc-protected sialyl-TN serine derivative for solid-phase glycopeptides synthesis. The solid-phase glycopeptide synthesis using this sialyl-TN serine derivative in which the sugar hydroxyl group was free afforded the target sialyl-TN-MUC4 glycopeptide.

Structurally defined imidazolium-type ionic oligomers as soluble/solid support for peptide synthesis.

Structurally defined ionic liquid-type imidazolium oligomers have been synthesized in multigram scales. These imidazolium salts have been applied to synthesize peptides efficiently in gram scale. The assembly of oligopeptides was conducted in homogeneous solution phase without the need of much excess reagents and capping as in the case of solid-phase peptide synthesis. Importantly, this approach made efficient peptide block couplings possible.

Glycal glycosylation and 2-nitroglycal concatenation, a powerful combination for mucin core structure synthesis.

A 3,4-O-unprotected galactal derivative having bulky 6-O-TIPS protection (compound 2) could be regioselectively 3-O-glycosylated with O-(galactopyranosyl) trichloroacetimidates; depending on the protecting group pattern stereoselectively alpha- and beta-linked disaccharides were obtained. With O-(2-azido-2-deoxyglucopyransyl) trichloroacetimidate as donor (compound 10A), glycosylation of 2 and of a 6-O-unprotected galactal derivative led in acetonitrile as solvent exclusively to a beta(1-3)- and a beta(1-6)-linked disaccharide, respectively. Nitration of the galactal moieties of the saccharides followed by Michael-type addition of serine and threonine derivatives (7a,b) installed the alpha-galacto-configuration, thus readily furnishing O-glycosyl amino acid building blocks for the incorporation of core 1, core 2, core 3, core 6, and core 8 structures into glycopeptides. 2-Nitrogalactal and 2-nitroglucal derivatives could be also successfully employed in glycoside bond formation via Michael-type addition in a reiterative manner, affording the corresponding core 5, core 7, and core 6 building blocks. In this approach, highly stereoselective glycoside bond formations were based exclusively on Michael-type addition to the nitro-enol ether moiety of the 2-nitroglycals. Hence, 2-nitroglycals are versatile intermediates for base-catalyzed glycoside bond formation.

Application of gel-phase 19F NMR spectroscopy for optimization of solid-phase synthesis of a hydrophobic peptide from the signal sequence of the mucin MUC1.

This paper describes the manual Fmoc/t-Bu solid-phase synthesis of a difficult nine-residue hydrophobic peptide LLLLTVLTV from one of the signal sequences that flank the tandem repeat of the mucin MUC1. Gel-phase 19F NMR spectroscopy was used as a straightforward method for optimization of the solid-phase synthesis. Different approaches were applied for comparative studies. The strategy based on modified solid-phase conditions using DIC/HOAt for coupling, DBU for Fmoc deprotection, and the incorporation of the pseudo proline dipeptide Fmoc-Leu-Thr(psiMe, Me pro)-OH as a backbone-protecting group was found to be superior according to gel-phase 19F NMR spectroscopy. Implementation of the optimized Fmoc protocol enabled an effective synthesis of signal peptide LLLLTVLTV.

Chemoenzymatic synthesis of a MUC1 glycopeptide carrying non-natural sialyl TF-beta O-glycan.

A MUC1 type of glycopeptide was synthesized by the 9-fluorenylmethoxycarbonyl (Fmoc) solid-phase peptide synthesis (SPPS) protocol using benzyl and benzylidene-protected beta-D-Gal-(1-->3)-beta-D-GalNAc-Ser/Thr (TF-beta: a stereoisomer of the Thomsen-Friedenreich antigen). The synthetic glycopeptide was released from the resin with reagent K, and the resulting benzylated glycopeptide was deprotected under conditions of low-acidity trifluoromethanesulfonic acid (TfOH). The glycopeptide carrying duplicate non-natural O-glycans was dominant in the products, but was accompanied by a considerable amount of the glycopeptide missing one of the O-glycans. In contrast, the native alpha-glycoside was relatively stable under the acidic debenzylation conditions as shown by a parallel experiment with the glycopeptide involving alpha-D-GalNAc-Ser/Thr linkage. Enzymatic glycosylation with CMP-NeuAc was successful with both natural and non-natural O-glycans of the synthetic glycopeptide.

Synthetic glycopeptides from the mucin family as potential tools in cancer immunotherapy.

Compared to glycoproteins of healthy cells, glycoproteins of tumor cells are often aberrantly glycosylated. Thus, glycopeptide fragments of surface glycoproteins of tumor cells are of interest as tumor-associated antigens for the distinction between normal and tumor cells. Cancer immunotherapy directed at selectively targeting these tumor-associated glycoprotein structure alterations--deficient glycosylation and, thus, exposure of peptide epitopes which are masked in normal cells--is considered a promising approach for the treatment of cancer. For this purpose, glycoproteins from the mucin family are of particular interest. Mucins belong to a class of heavily O-glycosylated, high-molecular weight glycoproteins present on the surface of many epithelial cells. The mucin core protein consists of numerous tandem repeats rich in serine, threonine and proline. In their tumor-associated forms, epithelial mucins carry cryptic saccharide structures such as T(N)-, T-, sialyl-T(N)- and sialyl-T antigens and more complex oligosaccharides (e.g. Lewis(y)). In contrast to glycoproteins isolated from natural sources, synthetic glycopeptides can be obtained in high purity and with exactly defined structure. In this review, methodologies for the synthesis of mucin-type glycopeptides containing complex tumor-associated antigen structures are described. Due to the low immunogenicity often exhibited by synthetic tumor-associated glycopeptide antigens, their conjugation to carrier proteins or suitable T-cell epitopes is essential for the development of anti-tumor vaccines. The results of immunological evaluations of synthetic (glyco)peptides and oligosaccharides are described. Some of these synthetic vaccines show promising activities inducing proliferation of T-cells and cytotoxic T-cell responses.

Construction of highly glycosylated mucin-type glycopeptides based on microwave-assisted solid-phase syntheses and enzymatic modifications.

A MUC1-related glycopeptide having five core-2 hexasaccharide branches (C330H527N46O207, MW = 8450.9) was synthesized by a new strategy using a combination of microwave-assisted solid-phase synthesis (MA-SPGS) and enzymatic sugar elongation. Synthesis of a key glycopeptide intermediate was best achieved in a combination of PEGA [poly(ethylene glycol)-poly-(N,N-dimethylacrylamide) copolymer] resin and MA-SPGS using glycosylated amino acid building blocks with high speed and high purity. Deprotection of the glycopeptide intermediate and subsequent glycosyltransferase-catalyzed sugar elongations were performed for generation of the additional diversities with the sugar moieties of glycopeptides using beta1,4-galactosyltransferase (beta1,4-GalT) and two kinds of alpha2,3-sialyltransferases [ST3Gal III; alpha2,3-(N)-SiaT and ST3Gal II; alpha2,3-(O)-SiaT]. These reactions proceeded successfully in the presence of 0.2% Triton X-100 to convert the chemically synthesized trisaccharide glycans to disialylated hexasaccharide.

Solid-phase synthesis of core 8 O-glycan-linked MUC5AC glycopeptide.

The benzyl-protected disaccharide building blocks of core 8 O-glycan (15a/15b) for glycopeptide were stereoselectively synthesized by two glycosidation reactions with the glycosyl fluoride method. The building blocks were utilized in the solid-phase synthesis of a glycopeptide carrying two O-glycans with the consensus sequence of the tandem-repeat domain of MUC5AC. The synthetic glycopeptide was detached from the resin with reagent K, and subsequent debenzylation under conditions of low-acidity TfOH afforded glycopeptide 2. The synthetic sample will be used as a suitable standard in studies of the physicochemical or immunochemical characterization of mucin glycoforms.

Parallel solid-phase synthesis of mucin-like glycopeptides.

The glycopeptide, Ac-Pro-Thr(alpha-D-GalNAc)-Thr(alpha-D-GalNAc)-Thr(alpha-d-GalNAc)-Pro-Leu-Lys-NH(2) (1), which features three consecutive O-glycosylated Thr residues and mimics a portion of mucin 2, has been prepared by solid-phase synthesis. Seven related, partially glycosylated peptides (2-8) were synthesized as well. This suite of molecules allowed a systematic analysis of synthetic protocols. N(alpha)-(9-Fluorenylmethoxycarbonyl)-O-(3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranosyl)-L-threonine pentafluorophenyl ester [Fmoc-L-Thr(Ac(3)-alpha-D-GalN(3))-OPfp] was used as a building block that coupled efficiently when used in a relatively low molar excess, that is, approximately 1.5 equiv, with N,N-dimethylformamide (DMF) as the solvent. For conversion of the azido group to the N-acetyl function, direct treatment with thioacetic acid was preferred over a two-step procedure involving reduction with dithiothreitol (DTT) followed by N-acetylation. Effective O-deacetylation of 1-8 in solution was achieved by treatment with sodium methoxide (10-15 mM; approximately 5 equiv) in methanol. On-resin deacetylation techniques were also examined, using sodium methoxide (6-10 mM) in DMF-methanol (17:3) (for 4 and 11) or hydrazine (70 mM) in methanol (for 8). The more convenient on-resin technique in DMF-methanol gave yields similar to solution conditions, and promises to be widely useful for solid-phase glycopeptide synthesis. HPLC profiles showed that free glycopeptides elute earlier than the corresponding O-acetylated derivatives, and that retention times vary systematically with the number of sugar moieties. (1)H NMR studies carried out in water showed an increase in conformational organization of glycopeptides with increased density of glycosylation.

Synthesis of tumor-associated glycopeptide antigens for the development of tumor-selective vaccines.

In contrast to normal cells, the glycoprotein profile on epithelial tumor cells is distinctly altered. Due to an incomplete formation of the glycan side-chains resulting from a premature sialylation, additional peptide epitopes become accessible to the immune system in mucin-type glycoproteins on tumor cells. These tumor-associated structure alterations constitute the basis for a selective immunological attack on cancer cells. For the construction of immunostimulating antigens, glycopeptide partial structures from the mucins MUC1 and MUC4 carrying the tumor-associated sialyl-T(N), alpha2,6-sialyl-T and alpha2,3-sialyl-T antigens have been synthesized. Employing different linkers such as the allylic HYCRON or the fluoride-sensitive PTMSEL anchor, the antigenic glycopeptide structures were constructed on the solid phase utilizing pre-assembled glycosyl amino acid building blocks prepared in solution by convergent chemical or chemoenzymatic strategies. The proliferation of cytotoxic T cells has been induced applying a construct composed of a sialyl-T(N) MUC1-glycopeptide conjugated with a tetanus toxin T cell peptide epitope.

Mucoadhesive thiolated chitosans as platforms for oral controlled drug delivery: synthesis and in vitro evaluation.

The aim of the present study was to evaluate the influence of the degree of modification and the polymer chain length on the mucoadhesive properties and the swelling behavior of thiolated chitosan derivatives obtained via a simple one-step reaction between the polymer and 2-iminothiolane. The conjugates differing in molecular mass of the polymer backbone and in the amount of immobilized thiol groups were compressed into tablets. They were investigated for their mucoadhesive properties on freshly excised porcine mucosa via tensile studies and the rotating cylinder method. Moreover, the swelling behavior of these tablets in aqueous solutions was studied by a simple gravimetric method. The obtained results demonstrated that the total work of adhesion of chitosan-TBA (=4-thio-butyl-amidine) conjugates can be improved by an increasing number of covalently attached thiol groups; a 100-fold increase compared to unmodified chitosan was observed for a medium molecular mass chitosan-TBA conjugate exhibiting 264 microM thiol groups per gram polymer. Also, the polymer chain length had an influence on the mucoadhesive properties of the polymer. The medium molecular mass polymer displayed a fourfold improved adhesion on the rotating cylinder compared to the derivative of low molecular mass. These results contribute to the development of new delivery systems exhibiting improved mucoadhesive properties.