Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 43
Filtrar
Más filtros












Base de datos
Intervalo de año de publicación
1.
Chem Commun (Camb) ; 57(100): 13776-13779, 2021 Dec 16.
Artículo en Inglés | MEDLINE | ID: mdl-34860221

RESUMEN

Light energy provides an attractive fuel source for energy dissipating systems because of the lack of waste production, wavelength tunability and the potential for spatial and temporal resolution. In this work, we describe a peptide-spiropyran conjugate that assembled into a transient nanofiber hydrogel in the presence of visible light, and dissociated when the light source was removed.


Asunto(s)
Hidrogeles/química , Péptidos/química , Benzopiranos/química , Benzopiranos/efectos de la radiación , Hidrogeles/síntesis química , Hidrogeles/efectos de la radiación , Luz , Nanofibras/química , Nanofibras/efectos de la radiación , Péptidos/efectos de la radiación , Compuestos de Espiro/química , Compuestos de Espiro/efectos de la radiación
2.
Carbohydr Polym ; 271: 118413, 2021 Nov 01.
Artículo en Inglés | MEDLINE | ID: mdl-34364555

RESUMEN

Loading a photocatalytic TiO2 to organic carriers has been desired for volumetric TiO2 incorporation, facile retrieval, and sustainable utilization. Traditionally, suspended TiO2 nanoparticles or its thin film on two-dimensional substrate are popularly fabricated for pollutants decomposition without carriers; due to poor thermomechanical properties of the organic carriers. Herein, a combination of the chitin nanofiber carrier and atomic layer deposition proves relevance for formation of anatase TiO2 thin layer so that photocatalytic decomposition in three-dimensional surface. Moreover, chitin nanofiber is capable of holding the TiO2 nanoparticles for multiple cycles of photocatalysis. Those types of TiO2 show characteristic degradation performance for gaseous (acetaldehyde) and aqueous pollutants (4-chlorophenol and rhodamine B). After catalytic reaction, chitin/TiO2 is retrievable owing to carrier's robustness even in water without TiO2 aggregation and loss. This work suggests that chitin-based photocatalyst is applicable to numerous pollutants through chitin's relatively high chemical resistance and stably wedged TiO2 during photocatalytic reaction.


Asunto(s)
Contaminantes Atmosféricos/química , Quitina/química , Nanopartículas del Metal/química , Nanofibras/química , Titanio/química , Contaminantes Químicos del Agua/química , Acetaldehído/química , Animales , Catálisis/efectos de la radiación , Quitina/toxicidad , Clorofenoles/química , Luz , Nanopartículas del Metal/efectos de la radiación , Nanopartículas del Metal/toxicidad , Ratones , Células 3T3 NIH , Nanofibras/efectos de la radiación , Nanofibras/toxicidad , Oxidación-Reducción , Rodaminas/química , Titanio/efectos de la radiación , Titanio/toxicidad
3.
Ecotoxicol Environ Saf ; 210: 111866, 2021 Mar 01.
Artículo en Inglés | MEDLINE | ID: mdl-33387906

RESUMEN

A novel composite electrospun fiber with high photocatalytic efficiency, good stability, strong hydrophobicity, good pollution resistance, and easy separation and recovery was synthesized. The TiO2@g-C3N4 (TCN) with special core-shell structure (5-10 nm shell) facilitated the separation of photogenerated electron-holes and had high photocatalytic performance. The poly (vinylidene fluoride) (PVDF) electrospun fiber immobilized with TCN was successfully fabricated (PVDF-TCN) with uniform distribution and size of nanofibers by using electrospinning, which was used for degrading tetracycline under visible-light irradiation (> 400 nm). A special rougher surface of electrospun fiber obtained by washing of sacrificial PVP increased the specific surface area, which became more conducive to the adhesion of the catalyst. The water contact angle and FTIR results demonstrated that the electrospun fiber became extremely hydrophilic after adding TCN catalyst, which could effectively mitigate the fiber pollution. The PVDF-TCN-0.2g electrospun fiber exhibited excellent photocatalytic performance and the degradation efficiency of tetracycline was up to 97% in 300 min under visible-light irradiation. The mechanism of PVDF-TCN electrospun fiber degradation of tetracycline in the photocatalytic process was also proposed. In addition, the PVDF-TCN-0.2g exhibited a stable activity after 4 cycles experiments since the degradation efficiency remained about 90%. Therefore, we believed this study provided a new strategy in catalyst immobilization and wastewater treatment.


Asunto(s)
Antibacterianos/química , Nanofibras/efectos de la radiación , Nitrilos/efectos de la radiación , Polivinilos/efectos de la radiación , Tetraciclina/química , Titanio/efectos de la radiación , Contaminantes Químicos del Agua/química , Catálisis , Luz , Nanofibras/química , Nitrilos/química , Procesos Fotoquímicos , Polivinilos/química , Titanio/química , Purificación del Agua/métodos
4.
ACS Appl Mater Interfaces ; 13(1): 1057-1064, 2021 Jan 13.
Artículo en Inglés | MEDLINE | ID: mdl-33378176

RESUMEN

Inverse photoconductance is an uncommon phenomenon observed in selective low-dimensional materials, in which the electrical conductivity of the materials decreases under light illumination. The unique material property holds great promise for biomedical applications in photodetectors, photoelectric logic gates, and low-power nonvolatile memory, which remains a daunting challenge. Especially, tunable photoconductivity for biocompatible materials is highly desired for interfacing with biological systems but is less explored in organic materials. Here, we report nanofibers self-assembled with cyclo-tyrosine-tyrosine (cyclo-YY) having voltage-regulated inverse photoconductance and photoconductance. The peptide nanofibers can be switched back and forth by a bias voltage for imitating biological sensing in artificial vision and memory devices. A peptide optoelectronic resistive random access memory (PORRAM) device has also been fabricated using the nanofibers that can be electrically switched between long-term and short-term memory. The underlying mechanism of the reversible photoconductance is discussed in this paper. Due to the inherent biocompatibility of peptide materials, the reversible photoconductive nanofibers may have broad applications in sensing and storage for biotic and abiotic interfaces.


Asunto(s)
Dipéptidos/química , Nanofibras/química , Péptidos Cíclicos/química , Equipos de Almacenamiento de Computador , Computadores Moleculares , Dipéptidos/efectos de la radiación , Conductividad Eléctrica , Nanofibras/efectos de la radiación , Péptidos Cíclicos/efectos de la radiación
5.
ACS Appl Mater Interfaces ; 12(51): 57410-57420, 2020 Dec 23.
Artículo en Inglés | MEDLINE | ID: mdl-33289538

RESUMEN

The development of intelligent and multifunctional hydrogels having photothermal properties, good mechanical properties, sustained drug release abilities with low burst release, antibacterial properties, and biocompatibility is highly desirable in the biomaterial field. Herein, mesoporous polydopamine (MPDA) nanoparticles wrapped with graphene oxide (GO) were physically cross-linked in cellulose nanofibril (CNF) hydrogel to obtain a novel MPDA@GO/CNF composite hydrogel for controllable drug release. MPDA nanoparticles exhibited a high drug loading ratio (up to 35 wt %) for tetracycline hydrochloride (TH). GO was used to encapsulate MPDA nanoparticles for extending the drug release time and reinforcing the physical strength of the obtained hydrogel. The mechanical strength of the as-fabricated MPDA@GO/CNF composite hydrogel was five times greater compared to that of the pure CNF hydrogel. Drug release experiments demonstrated that burst release behavior was significantly reduced by adding MPDA@GO. The drug release time of the MPDA@GO/CNF composite hydrogel was 3 times and 7.2 times longer than that of the polydopamine/CNF hydrogel and pure CNF hydrogel, respectively. The sustained and controlled drug release behaviors of the composite hydrogel were highly dependent on the proportion of MPDA and GO. Moreover, the rate of drug release could be accelerated by near-infrared (NIR) light irradiation and pH value change. The drug release kinetics of the as-prepared composite hydrogel was well described by the Korsmeyer-Peppas model, and the drug release mechanism of TH from the composite hydrogel was anomalous transport. Importantly, this carefully designed MPDA@GO/CNF composite hydrogel showed good biocompatibility through an in vitro cytotoxicity test. In particular, the toxicity of GO was well shielded by the CNF hydrogel. Therefore, this novel MPDA@GO/CNF composite hydrogel with an encapsulation structure for controllable drug release and toxicity shielding of GO could be used as a very promising controlled drug delivery carrier, which may have potential applications for chemical and physical therapies.


Asunto(s)
Celulosa/química , Portadores de Fármacos/química , Grafito/química , Hidrogeles/química , Indoles/química , Nanofibras/química , Polímeros/química , Celulosa/efectos de la radiación , Celulosa/toxicidad , Preparaciones de Acción Retardada/química , Preparaciones de Acción Retardada/efectos de la radiación , Preparaciones de Acción Retardada/toxicidad , Portadores de Fármacos/efectos de la radiación , Portadores de Fármacos/toxicidad , Liberación de Fármacos/efectos de la radiación , Grafito/efectos de la radiación , Grafito/toxicidad , Células Endoteliales de la Vena Umbilical Humana , Humanos , Hidrogeles/efectos de la radiación , Hidrogeles/toxicidad , Indoles/efectos de la radiación , Indoles/toxicidad , Rayos Infrarrojos , Nanofibras/efectos de la radiación , Nanofibras/toxicidad , Polímeros/efectos de la radiación , Polímeros/toxicidad , Tetraciclina/química
6.
Int J Mol Sci ; 21(22)2020 Nov 21.
Artículo en Inglés | MEDLINE | ID: mdl-33233379

RESUMEN

Polypyrrole one-dimensional nanostructures (nanotubes, nanobelts and nanofibers) were prepared using three various dyes (Methyl Orange, Methylene Blue and Eriochrome Black T). Their high electrical conductivity (from 17.1 to 60.9 S cm-1), good thermal stability (in the range from 25 to 150 °C) and resistivity against ageing (half-time of electrical conductivity around 80 days and better) were used in preparation of lightweight and flexible composites with silicone for electromagnetic interference shielding in the C-band region (5.85-8.2 GHz). The nanostructures' morphology and chemical structure were characterized by scanning electron microscopy, Brunauer-Emmett-Teller specific surface measurement and attenuated total reflection Fourier-transform infrared spectroscopy. DC electrical conductivity was measured using the Van der Pauw method. Complex permittivity and AC electrical conductivity of respective silicone composites were calculated from the measured scattering parameters. The relationships between structure, electrical properties and shielding efficiency were studied. It was found that 2 mm-thick silicone composites of polypyrrole nanotubes and nanobelts shield almost 80% of incident radiation in the C-band at very low loading of conductive filler in the silicone (5% w/w). Resulting lightweight and flexible polypyrrole composites exhibit promising properties for shielding of electromagnetic interference in sensitive biological and electronic systems.


Asunto(s)
Radiación Electromagnética , Nanoestructuras/química , Polímeros/química , Pirroles/química , Siliconas/química , Compuestos Azo/química , Azul de Metileno/química , Microscopía Electrónica de Rastreo , Nanofibras/química , Nanofibras/efectos de la radiación , Nanoestructuras/efectos de la radiación , Nanoestructuras/ultraestructura , Nanotubos/química , Nanotubos/efectos de la radiación , Nanotubos/ultraestructura , Polímeros/efectos de la radiación , Pirroles/efectos de la radiación , Siliconas/efectos de la radiación
7.
J Hazard Mater ; 392: 122331, 2020 06 15.
Artículo en Inglés | MEDLINE | ID: mdl-32097858

RESUMEN

The emergence of more and more persistent organic molecules as contaminants in water simulates research towards the development of more advanced technologies, among which photocatalysis is a feasible choice. However, it is still challenging to design a photocatalyst that fulfills all the requirements for industrial application, i.e., active under visible-light irradiation, shape with handy convenience, highly uniform distribution of active sites, substrate with excellent electronic properties, etc. In this study, we report an attempt to solve these issues at once by designing a film-like photocatalyst with uniform distribution of nitrogen-doped ZnO nanoparticles along nitrogen-doped carbon ultrafine nanofibers with three-dimensional interconnected structure. Under visible-light irradiation, the product exhibited remarkable reactivity for the degradation of two model pollutants tetracycline hydrochloride and 2,4-dichlorophenol within 100 min. The cyclic experiments demonstrated only a slight loss (ca. 5 %) of reactivity after five consecutive photocatalytic reactions. We also investigated the detailed relationship between the structural features and the superior properties of this product, as well as the degradation mechanisms. The convenient shape of the product with excellent performances for the treatment of real polluted water increases its suitability for larger scale application. Our work provides a rational design of photocatalysts for environmental remediation.


Asunto(s)
Carbono/efectos de la radiación , Clorofenoles/química , Luz , Nanofibras/efectos de la radiación , Nitrógeno/efectos de la radiación , Tetraciclina/química , Contaminantes Químicos del Agua/química , Óxido de Zinc/efectos de la radiación , Carbono/química , Catálisis , Óxidos N-Cíclicos/química , Nanofibras/química , Nitrógeno/química , Fotólisis , Purificación del Agua/métodos , Zeolitas/química , Óxido de Zinc/química
8.
ACS Appl Mater Interfaces ; 12(7): 7905-7914, 2020 Feb 19.
Artículo en Inglés | MEDLINE | ID: mdl-31976653

RESUMEN

Although electrospun nanofibers have been used to deliver functional genes into cells attached to the surface of the nanofibers, the controllable release of genes from nanofibers and the subsequent gene transfection with high efficiency remain challenging. Herein, photothermally activated electrospun hybrid nanofibers are developed for high-efficiency surface-mediated gene transfection. Nanofibers with a core-sheath structure are fabricated using coaxial electrospinning. Plasmid DNA (pDNA) encoding basic fibroblast growth factor is encapsulated in the fiber core, and gold nanorods with photothermal properties are embedded in the fiber sheath composed of poly(l-lactic acid) and gelatin. The nanofiber mats show excellent and controllable photothermal response under near-infrared irradiation. The permeability of the nanofibers is thereby enhanced to allow the rapid release of pDNA. In addition, transient holes are formed in the membranes of NIH-3T3 fibroblasts attached to the mat, thus facilitating delivery and transfection with pDNA and leading to increased proliferation and migration of the transfected cells in vitro. This work offers a facile and reliable method for the regulation of cell function and cell behavior via localized gene transfection, showing great potential for application in tissue engineering and cell-based therapy.


Asunto(s)
Membrana Celular/efectos de la radiación , Nanofibras/química , Nanofibras/efectos de la radiación , Transfección/métodos , Animales , Membrana Celular/química , Movimiento Celular/genética , Proliferación Celular/genética , ADN/genética , Factores de Crecimiento de Fibroblastos/genética , Factores de Crecimiento de Fibroblastos/metabolismo , Gelatina/química , Oro/química , Ratones , Microscopía Electrónica de Rastreo , Células 3T3 NIH , Nanofibras/ultraestructura , Nanotubos/química , Plásmidos/genética , Poliésteres/química , Transfección/instrumentación
9.
Curr Protein Pept Sci ; 21(4): 401-412, 2020.
Artículo en Inglés | MEDLINE | ID: mdl-31893991

RESUMEN

Self-assembled peptides have been shown to form well-defined nanostructures which display outstanding characteristics for many biomedical applications and especially in controlled drug delivery. Such biomaterials are becoming increasingly popular due to routine, standardized methods of synthesis, high biocompatibility, biodegradability and ease of upscale. Moreover, one can modify the structure at the molecular level to form various nanostructures with a wide range of applications in the field of medicine. Through environmental modifications such as changes in pH and ionic strength and the introduction of enzymes or light, it is possible to trigger self-assembly and design a host of different self-assembled nanostructures. The resulting nanostructures include nanotubes, nanofibers, hydrogels and nanovesicles which all display a diverse range of physico-chemical and mechanical properties. Depending on their design, peptide self-assembling nanostructures can be manufactured with improved biocompatibility and in vivo stability and the ability to encapsulate drugs with the capacity for sustained drug delivery. These molecules can act as carriers for drug molecules to ferry cargo intracellularly and respond to stimuli changes for both hydrophilic and hydrophobic drugs. This review explores the types of self-assembling nanostructures, the effects of external stimuli on and the mechanisms behind the assembly process, and applications for such technology in drug delivery.


Asunto(s)
Antineoplásicos/farmacología , Preparaciones de Acción Retardada/química , Portadores de Fármacos/química , Hidrogeles/química , Nanofibras/química , Nanotubos/química , Antineoplásicos/química , Antineoplásicos/efectos de la radiación , Preparaciones de Acción Retardada/administración & dosificación , Preparaciones de Acción Retardada/efectos de la radiación , Portadores de Fármacos/administración & dosificación , Composición de Medicamentos/métodos , Humanos , Hidrogeles/administración & dosificación , Hidrogeles/efectos de la radiación , Enlace de Hidrógeno , Concentración de Iones de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Luz , Nanofibras/administración & dosificación , Nanofibras/efectos de la radiación , Nanotubos/efectos de la radiación , Neoplasias/tratamiento farmacológico , Neoplasias/metabolismo , Neoplasias/patología , Concentración Osmolar , Péptidos Cíclicos/química , Péptidos Cíclicos/farmacología , Conformación Proteica en Lámina beta , Electricidad Estática , Temperatura
10.
J Hazard Mater ; 385: 121553, 2020 03 05.
Artículo en Inglés | MEDLINE | ID: mdl-31818659

RESUMEN

MoS2/α-NiMoO4 ultra-thin nanoneedle composite was synthesized by microwave hydrothermal process in one step. The nanocomposite revealed the complete destruction of multidrug resistant Staphylococcus aureus (S. aureus) within 150 min under visible light irradiation. According to electron spin resonance measurement and radical trapping experiment, it has been established that O2¯ acts as a major active species for bacterial inactivation in visible light. The bacterial inactivation was further proved by membrane deformities in bacterial cell membrane, DNA fragmentation, and protein destruction. TEM- elemental mapping confirms the inactivation of S. aureus by reactive oxygen species (ROS) but not the toxicity of photocatalyst. Transient photocurrent responses, electrochemical impedance spectroscopy, and cyclic voltammetry measurements reveal the efficient separation of electron-hole pairs in the composite photocatalyst. The composite photocatalyst shows greater ROS production, higher degree of DNA fragmentation and protein degradation, detrimental effects on the morphology of the bacterial cell wall, outstanding transient photocurrent responses, reduction of interfacial charge transfer resistance, superb oxidation/reduction potential, strong visible light absorption, and adequate separation of photogenerated electron-hole pairs as compared to host photocatalyst. The photocatalytic inactivation mechanism was explained. So, this promising composite photocatalyst can be applied for inactivation of multidrug resistant bacteria in biological waste water.


Asunto(s)
Antibacterianos/farmacología , Disulfuros/farmacología , Staphylococcus aureus Resistente a Meticilina/efectos de los fármacos , Molibdeno/farmacología , Nanocompuestos/química , Nanofibras/química , Antibacterianos/química , Antibacterianos/efectos de la radiación , Catálisis , Membrana Celular/efectos de los fármacos , ADN/efectos de los fármacos , Fragmentación del ADN/efectos de los fármacos , Disulfuros/química , Disulfuros/efectos de la radiación , Luz , Molibdeno/química , Molibdeno/efectos de la radiación , Nanocompuestos/efectos de la radiación , Nanofibras/efectos de la radiación , Especies Reactivas de Oxígeno/metabolismo
11.
ACS Appl Mater Interfaces ; 11(47): 44673-44681, 2019 Nov 27.
Artículo en Inglés | MEDLINE | ID: mdl-31690067

RESUMEN

Extreme heat events are mainly responsible for weather-related human mortality due to climate change. However, there is a lack of outdoor thermal management for protecting people from extreme heat events. We present a novel infrared-radiation-enhanced nanofiber membrane (NFM) that has good infrared resonance absorption and selectively radiates thermal radiation of the human body through the atmosphere and into the cold outer space. The NFM comprises polyamide 6 (PA6) nanofibers and randomly distributed SiO2 submicron spheres and has sufficient air permeability and thermal-moisture comfortability because of its interconnect nanopores and micropores. We measure the sky radiative cooling performance under a clear sky, and PA6/SiO2 NFM produces temperatures that are about 0.4-1.7 °C lower than those of commercial textiles when covering dry and wet hands and temperatures 1.0-2.5 °C lower than the ambient temperature when thermal conduction and convection are isolated in a closed device. Our processed PA6/SiO2 NFM combines sky radiative cooling with thermal management of the human body very well, which will promote the development of radiative cooling textiles.


Asunto(s)
Nanofibras/química , Temperatura Cutánea/efectos de la radiación , Textiles/efectos de la radiación , Caprolactama/análogos & derivados , Caprolactama/química , Cuerpo Humano , Humanos , Rayos Infrarrojos , Nanofibras/efectos de la radiación , Polímeros/química , Dióxido de Silicio/química , Textiles/análisis
12.
Colloids Surf B Biointerfaces ; 183: 110395, 2019 Nov 01.
Artículo en Inglés | MEDLINE | ID: mdl-31386934

RESUMEN

Vascular implants remain clinically challenged due to often-occurring thrombosis and stenosis. Critical to addressing these complications is the design of implant material surfaces to inhibit the activities of platelets, smooth muscle cells (SMCs) and inflammatory cells. Recent mechanobiology studies accentuate the significance of material elasticity to cells and tissues. We thus developed and characterized an implant coating composed of hybrid, viscoelastic microfibers with coaxial core-sheath nanostructure. The coating over metallic stent material was formed by first depositing coaxially-electrospun fibers of poly(L-lactic acid) core and polyethylene glycol dimethacrylate sheath, and then polymerizing fibers with various UV times. Material characterizations were performed to evaluate the coating structure, mechanical property and biocompatibility. Results showed that coaxial microfibers exhibited arterial-like mechanics. The soft surface, high water content and swelling ratio of the coaxial fibers resemble hydrogels, while they are mechanically strong with an elastic modulus of 172-729 kPa. The coating strength and surface elasticity were tunable with the photopolymerization time. Further, the elastic fibers, as conformal coating on stent metal, strongly reduced SMC overgrowth and discouraged platelet adhesion and activation, compared to bare metals. Importantly, after 7-day subcutaneous implantation, coaxial fiber-coated implants showed more favorable in vivo responses with reduced tissue encapsulation, compared to bare stent metals or those coated with a two-layered fiber mixture composed of fibers from individual polymers. The excellent biocompatibility aroused from nanostructural interfaces of hybrid fibers offering hydrated, soft, nonfouling microenvironments. Such integrated fiber system may allow creation of advanced vascular implants that possess physico-mechanical properties of native arteries.


Asunto(s)
Prótesis Vascular , Materiales Biocompatibles Revestidos/química , Hidrogeles/química , Metacrilatos/química , Nanofibras/química , Poliésteres/química , Polietilenglicoles/química , Animales , Plaquetas/citología , Plaquetas/efectos de los fármacos , Bovinos , Supervivencia Celular/efectos de los fármacos , Materiales Biocompatibles Revestidos/farmacología , Materiales Biocompatibles Revestidos/efectos de la radiación , Elasticidad , Técnicas Electroquímicas , Hidrogeles/farmacología , Hidrogeles/efectos de la radiación , Miocitos del Músculo Liso/citología , Miocitos del Músculo Liso/efectos de los fármacos , Nanofibras/efectos de la radiación , Nanofibras/ultraestructura , Adhesividad Plaquetaria/efectos de los fármacos , Polimerizacion , Cultivo Primario de Células , Ratas , Propiedades de Superficie , Rayos Ultravioleta , Viscosidad
13.
J Mater Sci Mater Med ; 30(4): 42, 2019 Mar 27.
Artículo en Inglés | MEDLINE | ID: mdl-30919082

RESUMEN

Biodegradable polymers such as polycaprolactone (PCL) are increasingly used for electrospinning substrates for tissue engineering. These materials offer great advantages such as biocompatibility and good mechanical properties. However, in order to be approved for human implantation they have to be sterilized. The impact of commonly used irradiation sterilization methods on electrospun PCL fiber mats was investigated systematically. Electron beam (ß-irradiation), gamma and X-ray irradiation with two different doses (25 and 33 kGy) were investigated. To determine the impact on the fiber mats, mechanical, chemical, thermal properties and crystallinity were investigated. Irradiation resulted in a significant decrease in molecular weight. At the same time, crystallinity of fiber mats increased significantly. However, the mechanical properties did not change significantly upon irradiation, mostly likely because effects of a lower molecular weight were balanced with the higher degree of crystallinity. The irradiation effects were dose dependent, a higher irradiation dose led to stronger changes. Gamma irradiation seemed to be the least suited method, while electron beams (ß irradiation) had a lower impact. Therefore, ß irradiation is recommended as sterilization method for electrospun PCL fiber mats.


Asunto(s)
Desinfección/métodos , Membranas Artificiales , Nanofibras/química , Nanofibras/efectos de la radiación , Poliésteres/química , Andamios del Tejido , Electrones , Galvanoplastia/métodos , Rayos gamma , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Poliésteres/efectos de la radiación , Polímeros/química , Polímeros/efectos de la radiación , Esterilización/métodos , Estrés Mecánico , Propiedades de Superficie , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Rayos X
14.
Environ Sci Pollut Res Int ; 26(8): 8050-8068, 2019 Mar.
Artículo en Inglés | MEDLINE | ID: mdl-30685863

RESUMEN

CeO2/Ag2CrO4 composite photocatalyst was successfully fabricated using electrospinning and calcination and chemical precipitation method based on CeO2 ribbon-like fibers and characterized by field-emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (DRS) and Fourier-transform infrared spectroscopy (FT-IR). The as-obtained CeO2/Ag2CrO4 composite used photocatalytic performance in the sonophotodegradation of rhodamine B in aqueous solution under visible-light (LED) irradiation. DRS analysis illustrates that CeO2/Ag2CrO4 composite exhibited enhanced absorption in the visible region-attributed CeO2 nanofibers. The effect of four effective parameters including initial concentration of rhodamine B (RhB), photocatalyst dosage, pH, and irradiation time was studied and optimized using central composite design. The kinetic studies confirmed ability of pseudo first-order reaction based on the Langmuir-Hinshelwood model for fitting empirical data, while its rate constant (kobs), L-H rate constants (kr), and L-H adsorption constants (KA) were 0.0449 min-1, 11.66 mg L-1 min-1 and 1.09E-3 mg L-1, respectively. The enhanced photocatalytic activity could be ascribed to the ultrasound field and formation of a heterojunction system among CeO2 and Ag2CrO4, which lead to a better mass transfer and higher efficiency of charge electron-hole separation, respectively.


Asunto(s)
Cerio/química , Cromatos/química , Luz , Nanofibras/química , Rodaminas/análisis , Compuestos de Plata/química , Ondas Ultrasónicas , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Adsorción , Catálisis , Cerio/efectos de la radiación , Cromatos/efectos de la radiación , Diseño de Equipo , Cinética , Nanofibras/efectos de la radiación , Fotólisis , Rodaminas/efectos de la radiación , Compuestos de Plata/efectos de la radiación , Aguas Residuales/química , Contaminantes Químicos del Agua/efectos de la radiación , Purificación del Agua/instrumentación
15.
Anal Chem ; 91(3): 1711-1714, 2019 02 05.
Artículo en Inglés | MEDLINE | ID: mdl-30606011

RESUMEN

In this work, highly sensitive discrimination of nerve agent and sulfur mustard simulants is achieved by using photostable and fluorescent coassembled nanofibers from molecules 1 and 2. We demonstrate that the introduction of 2 as a Förster resonance energy transfer (FRET) acceptor not only enhances the photostability and emission efficiency compared to individual 1 nanofibers but also induces different binding interactions between analytes and 1-2 coassembled nanofibers and thereby distinct fluorescence quenching behaviors used for the discrimination of nerve agent and sulfur mustard simulants. Our findings represent an important advance toward sensitive detection and discrimination of chemical warfare agents (CWAs).


Asunto(s)
Colorantes Fluorescentes/química , Gas Mostaza/análogos & derivados , Nanofibras/química , Agentes Nerviosos/análisis , Compuestos Organofosforados/análisis , Carbazoles/química , Carbazoles/efectos de la radiación , Transferencia Resonante de Energía de Fluorescencia/métodos , Colorantes Fluorescentes/efectos de la radiación , Límite de Detección , Gas Mostaza/análisis , Nanofibras/efectos de la radiación , Rayos Ultravioleta
16.
Biomacromolecules ; 20(2): 693-704, 2019 02 11.
Artículo en Inglés | MEDLINE | ID: mdl-30358992

RESUMEN

Brittleness has hindered commercialization of cellulose nanofibril (CNF) films. The use of synthetic polymers and plasticizers is a known detour that impairs biodegradability and carbon footprint of the product. Herein, we utilize a variety of softwood Kraft lignin morphologies to obtain strong and ductile CNF nanocomposite films. An optimum 10 wt % content of colloidal lignin particles (CLPs) produced films with nearly double the toughness compared to a CNF film without lignin. CLPs rendered the films waterproof, provided antioxidant activity and UV-shielding with better visible light transmittance than obtained with irregular lignin aggregates. We conclude based on electron microscopy, dynamic water sorption analysis, and tp-DSC that homogeneously distributed CLPs act as ball bearing lubricating and stress transferring agents in the CNF matrix. Overall, our results open new avenues for the utilization of lignin nanoparticles in biopolymer composites equipped with versatile functionalities for applications in food packaging, water purification, and biomedicine.


Asunto(s)
Lignina/química , Nanocompuestos/química , Nanofibras/química , Coloides/química , Nanocompuestos/efectos de la radiación , Nanofibras/efectos de la radiación , Luz Solar , Resistencia a la Tracción , Rayos Ultravioleta
17.
Bioorg Chem ; 79: 126-130, 2018 09.
Artículo en Inglés | MEDLINE | ID: mdl-29747128

RESUMEN

A lactose modified pyrene derivative (Py-Lac) was synthesized, with which novel twisted supramolecular nanofibers in diameter about 20 nm were constructed by self-assembly. The nanofibers showed solid-state fluorescence between 400 nm and 650 nm with the maximum emission at 495 nm. Furthermore, its recognition reaction with PNA lectin was investigated by fluorescence spectra and turbidity assays. It is interesting found that the supramolecular assembly as multivalent glycocluster exhibited unique and selectively binding interactions with PNA lectin with the binding constant of 5.74 × 106 M-1. Moreover, compound Py-Lac showed two-photon fluorescence imaging with Hep G2 cells.


Asunto(s)
Colorantes Fluorescentes/química , Lactosa/análogos & derivados , Sustancias Macromoleculares/química , Nanofibras/química , Pirenos/química , Arachis/química , Fluorescencia , Colorantes Fluorescentes/síntesis química , Colorantes Fluorescentes/efectos de la radiación , Células Hep G2 , Humanos , Lactosa/síntesis química , Lactosa/efectos de la radiación , Luz , Sustancias Macromoleculares/síntesis química , Sustancias Macromoleculares/efectos de la radiación , Microscopía Fluorescente/métodos , Nanofibras/efectos de la radiación , Aglutinina de Mani/química , Pirenos/síntesis química , Pirenos/efectos de la radiación
18.
Nat Commun ; 9(1): 452, 2018 01 31.
Artículo en Inglés | MEDLINE | ID: mdl-29386508

RESUMEN

Light in biological media is known as freely diffusing because interference is negligible. Here, we show Anderson light localization in quasi-two-dimensional protein nanostructures produced by silkworms (Bombyx mori). For transmission channels in native silk, the light flux is governed by a few localized modes. Relative spatial fluctuations in transmission quantities are proximal to the Anderson regime. The sizes of passive cavities (smaller than a single fibre) and the statistics of modes (decomposed from excitation at the gain-loss equilibrium) differentiate silk from other diffusive structures sharing microscopic morphological similarity. Because the strong reflectivity from Anderson localization is combined with the high emissivity of the biomolecules in infra-red radiation, silk radiates heat more than it absorbs for passive cooling. This collective evidence explains how a silkworm designs a nanoarchitectured optical window of resonant tunnelling in the physically closed structures, while suppressing most of transmission in the visible spectrum and emitting thermal radiation.


Asunto(s)
Nanofibras/efectos de la radiación , Seda/efectos de la radiación , Animales , Bombyx , Luz , Luminiscencia , Seda/ultraestructura
19.
J Colloid Interface Sci ; 513: 566-574, 2018 Mar 01.
Artículo en Inglés | MEDLINE | ID: mdl-29190568

RESUMEN

Depositing of hierarchical ZnO nanostructures on electrospun nanofibers and their proper attachment has gained significant interest for myriad applications. However, the weak attachment of such nanostructures to the nanofiber surface limits their practical applications. In this study, a simple and efficient method has been developed for preparing hierarchical ZnO nanorod deposited polyurethane (PU) nanofiber by combining electrospinning, surface functionalization and hydrothermal treatment. Electrospun PU nanofibers were coated with polydopamine (Pdopa) via dip coating method. The resulting Pdopa coated PU nanofibrous mat was soaked in aqueous ZnO nanoparticles (ZnONPs) solution in order to seed the metal-oxide particles on its surface. Later, ZnO nanorods (ZNRs) were grown on the ZnO-seeded electrospun PU nanofiber via a hydrothermal process. X-ray photoelectron spectroscopy (XPS), Field-Emission Scanning electron microscopy (FE-SEM), X-ray diffraction pattern (XRD) and infra-red (IR) spectra indicated that ZnO nanorods firmly adhered to the functionalized PU nanofiber surface and had high photocatalytic/antimicrobial activity at the low-intensity UV-LED device with good reusability. The catechol group of Pdopa not only causes adhesion of ZnO nanostructures, but also act as an electron trap, preventing the recombination of e-h pairs and thereby improving the photocatalytic efficiency. We believe that the fabricated composite membrane with antifouling effect and photocatalytic activity is a potential candidate for organic pollutant degdration and wastewater purification.


Asunto(s)
Antibacterianos/farmacología , Bacterias/efectos de los fármacos , Indoles/química , Nanofibras/administración & dosificación , Nanoestructuras/química , Fotoquímica , Polímeros/química , Óxido de Zinc/química , Antibacterianos/química , Catálisis , Galvanoplastia , Ensayo de Materiales , Nanofibras/química , Nanofibras/efectos de la radiación , Nanoestructuras/efectos de la radiación , Óxido de Zinc/efectos de la radiación
20.
Environ Sci Pollut Res Int ; 23(21): 21395-21406, 2016 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-27502566

RESUMEN

The photocatalytic treatment of gaseous benzene under visible light irradiation was developed using electrospun carbon nanotube/titanium dioxide (CNT/TiO2) nanofibers as visible light active photocatalysts. The CNT/TiO2 nanofibers were fabricated by electrospinning CNT/poly(vinyl pyrrolidone) (PVP) solution followed by the removal of PVP by calcination at 450 °C. The molar ratio of CNT/TiO2 was fixed at 0.05:1 by weight, and the quantity of CNT/TiO2 loaded in PVP solution varied between 30 and 60 % wt. CNT/TiO2 nanofibers have high specific surface area (116 m2/g), significantly higher than that of TiO2 nanofibers (44 m2/g). The photocatalytic performance of the CNT/TiO2 nanofibers was investigated by decolorization of 1 × 10-5 M methylene blue (MB) dye (in water solution) and degradation of 100 ppm gaseous benzene under visible light irradiation. The 50-CNT/TiO2 nanofibers (calcined CNT/TiO2 nanofibers fabricated from a spinning solution of 50 % wt CNT/TiO2 based on PVP) had higher MB degradation efficiency (58 %) than did other CNT/TiO2 nanofibers and pristine TiO2 nanofibers (15 %) under visible light irradiation. The photocatalytic degradation of gaseous benzene under visible light irradiation on filters made of 50-CNT/TiO2 nanofibers was carried out in a simulated air purifier system. Similar to MB results, the degradation efficiency of gaseous benzene by 50-CNT/TiO2 nanofibers (52 %) was higher than by other CNT/TiO2 nanofibers and pristine TiO2 nanofibers (18 %). The synergistic effects of the larger surface area and lower band gap energy of CNT/TiO2 nanofibers were presented as strong adsorption ability and greater visible light adsorption. The CNT/TiO2 nanofiber prepared in this study has potential for use in air purifiers to improve air treatment efficiency with less energy.


Asunto(s)
Contaminantes Atmosféricos/análisis , Benceno/análisis , Luz , Nanofibras/química , Nanotubos de Carbono/química , Titanio/química , Adsorción , Filtros de Aire , Catálisis , Azul de Metileno/análisis , Nanofibras/efectos de la radiación , Nanotubos de Carbono/efectos de la radiación , Propiedades de Superficie , Titanio/efectos de la radiación
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...