Speech intelligibility prediction based on a physiological model of the human ear and a hierarchical spiking neural network.

A speech intelligibility (SI) prediction model is proposed that includes an auditory preprocessing component based on the physiological anatomy and activity of the human ear, a hierarchical spiking neural network, and a decision back-end processing based on correlation analysis. The auditory preprocessing component effectively captures advanced physiological details of the auditory system, such as retrograde traveling waves, longitudinal coupling, and cochlear nonlinearity. The ability of the model to predict data from normal-hearing listeners under various additive noise conditions was considered. The predictions closely matched the experimental test data under all conditions. Furthermore, we developed a lumped mass model of a McGee stainless-steel piston with the middle-ear to study the recovery of individuals with otosclerosis. We show that the proposed SI model accurately simulates the effect of middle-ear intervention on SI. Consequently, the model establishes a model-based relationship between objective measures of human ear damage, like distortion product otoacoustic emissions, and speech perception. Moreover, the SI model can serve as a robust tool for optimizing parameters and for preoperative assessment of artificial stimuli, providing a valuable reference for clinical treatments of conductive hearing loss.

Finite-element modelling of interactions of needle with tympanic membrane and middle ear.

The tympanic membrane (TM) is one of the most common routes to access the middle ear and inner ear for the treatment of hearing and balance pathologies. Since the TM is a soft thin biological tissue with small dimensions, using needles seems to be among the most practical interventional approaches. In this study, we proposed a finite-element (FE) analysis of needle-TM interactions that combines a 3D model of the TM and other main middle-ear structures in gerbil, and a 2D model of needle insertion into the TM based on the cohesive zone method (CZM). The TM was modelled using a 1st-order Ogden hyperelastic material and its properties were obtained by fitting to the experimental force-displacement plots of large deformation in the TM under needle indentation. The cohesive parameters were also acquired by calibrating the puncture force against the experimental data of needle insertion into the TM. These FE models were then used to obtain the deformation behaviour of the TM and other middle-ear structures due to the insertion force applied at different locations on the TM. Moreover, we investigated the effect of the TM thickness, the geometry of the needle (i.e., diameter and tip angle), and needle material on the insertion of needles into the TM. We also studied the penetration success of deformable needles.

Research on sound quality prediction of vehicle interior noise using the human-ear physiological model.

In order to improve the prediction accuracy of the sound quality of vehicle interior noise, a novel sound quality prediction model was proposed based on the physiological response predicted metrics, i.e., loudness, sharpness, and roughness. First, a human-ear sound transmission model was constructed by combining the outer and middle ear finite element model with the cochlear transmission line model. This model converted external input noise into cochlear basilar membrane response. Second, the physiological perception models of loudness, sharpness, and roughness were constructed by transforming the basilar membrane response into sound perception related to neuronal firing. Finally, taking the calculated loudness, sharpness, and roughness of the physiological model and the subjective evaluation values of vehicle interior noise as the parameters, a sound quality prediction model was constructed by TabNet model. The results demonstrate that the loudness, sharpness, and roughness computed by the human-ear physiological model exhibit a stronger correlation with the subjective evaluation of sound quality annoyance compared to traditional psychoacoustic parameters. Furthermore, the average error percentage of sound quality prediction based on the physiological model is only 3.81%, which is lower than that based on traditional psychoacoustic parameters.

Stochastic modeling of the human middle ear dynamics under pathological conditions.

BACKGROUND: Although the dynamics of the middle ear (ME) have been modeled since the mid-twentieth century, only recently stochastic approaches started to be applied. In this study, a stochastic model of the ME was utilized to predict the ME dynamics under both healthy and pathological conditions. METHODS: The deterministic ME model is based on a lumped-parameter representation, while the stochastic model was developed using a probabilistic non-parametric approach that randomizes the deterministic model. Subsequently, the ME model was modified to represent the ME under pathological conditions. Furthermore, the simulated data was used to develop a classifier model of the ME condition based on a machine learning algorithm. RESULTS: The ME model under healthy conditions exhibited good agreement with statistical experimental results. The ranges of probabilities from models under pathological conditions were qualitatively compared to individual experimental data, revealing similarities. Moreover, the classifier model presented promising results. DISCUSSION: The results aimed to elucidate how the ME dynamics, under different conditions, can overlap across various frequency ranges. Despite the promising results, improvements in the stochastic and classifier models are necessary. Nevertheless, this study serves as a starting point that can yield valuable tools for researchers and clinicians.

Differential effects of mass-loading the eardrum and stiffening the middle ear on wideband absorbance.

The current work investigated the effects of mass-loading the eardrum on wideband absorbance in humans. A non-invasive approach to mass-loading the eardrum was utilized in which water was placed on the eardrum via ear canal access. The mass-loaded absorbance was compared to absorbance measured for two alternative middle ear states: normal and stiffened. To stiffen the ear, subjects pressurized the middle ear through either exsufflation or insufflation concurrent with Eustachian tube opening. Mass-loading the eardrum was hypothesized to reduce high-frequency absorbance, whereas pressurizing the middle ear was hypothesized to reduce low- to mid-frequency absorbance. Discriminant linear analysis classification was performed to evaluate the utility of absorbance in differentiating between conditions. Water on the eardrum reduced absorbance over the 0.7- to 6-kHz frequency range and increased absorbance at frequencies below approximately 0.5 kHz; these changes approximated the pattern of changes reported in both hearing thresholds and stapes motion upon mass-loading the eardrum. Pressurizing the middle ear reduced the absorbance over the 0.125- to 4-kHz frequency range. Several classification models based on the absorbance in two- or three-frequency bands had accuracy exceeding 88%.

The impact of round window reinforcement on middle and inner ear mechanics with air and bone conduction stimulation.

The round window (RW) membrane plays an important role in normal inner ear mechanics. Occlusion or reinforcement of the RW has been described in the context of congenital anomalies or after cochlear implantation and is applied as a surgical treatment for hyperacusis. Multiple lumped and finite element models predict a low-frequency hearing loss with air conduction of up to 20 dB after RW reinforcement and limited to no effect on hearing with bone conduction stimulation. Experimental verification of these results, however, remains limited. Here, we present an experimental study measuring the impact of RW reinforcement on the middle and inner ear mechanics with air and bone conduction stimulation. In a within-specimen repeated measures design with human cadaveric specimens (n = 6), we compared the intracochlear pressures in scala vestibuli (PSV) and scala tympani (PST) before and after RW reinforcement with soft tissue, cartilage, and bone cement. The differential pressure (PDIFF) across the basilar membrane - known to be closely related to the hearing sensation - was calculated as the complex difference between PSV and PST. With air conduction stimulation, both PSV and PSTincreased on average up to 22 dB at frequencies below 1500 Hz with larger effect sizes for PST compared to PSV. The PDIFF, in contrast, decreased up to 11 dB at frequencies between 700 and 800 Hz after reinforcement with bone cement. With bone conduction, the average within-specimen effects were less than 5 dB for either PSV, PST, or PDIFF. The inter-specimen variability with bone conduction, however, was considerably larger than with air conduction. This experimental study shows that RW reinforcement impacts air conduction stimulation at low frequencies. Bone conduction stimulation seems to be largely unaffected. From a clinical point of view, these results support the hypothesis that delayed loss of air conduction hearing after cochlear implantation could be partially explained by the impact of RW reinforcement.

Effects of Tympanic Membrane Electrodes on Sound Transmission From the Ear Canal to the Middle and Inner Ears.

OBJECTIVES: The first objective of the study was to compare approaches to eardrum electrode insertion as they relate to the likelihood of introducing an acoustic leak between the ear canal and eartip. A common method for placing a tympanic membrane electrode involves securing the electrode in the canal by routing it underneath a foam eartip. This method is hypothesized to result in a slit leak between the canal and foam tip due to the added bulk of the electrode wire. An alternative approach involves creating a bore in the wall of the foam tip that the electrode can be threaded through. This method is hypothesized to reduce the likelihood of a slit leak before the electrode wire is integrated into the foam tip. The second objective of the study was to investigate how sound transmission in the ear is affected by placing an electrode on the eardrum. It was hypothesized that an electrode in contact with the eardrum increases the eardrum's mass, with the potential to reduce sound transmission at high frequencies. DESIGN: Wideband acoustic immittance and distortion product otoacoustic emissions (DPOAEs) were measured in eight human ears. Measurements were completed for five different conditions: (1) baseline with no electrode in the canal, (2) dry electrode in the canal but not touching the eardrum, secured underneath the eartip, (3) dry electrode in the canal not touching the eardrum, secured through a bore in the eartip (subsequent conditions were completed using this method), (4) hydrated electrode in the canal but not touching the eardrum, and (5) hydrated electrode touching the eardrum. To create the bore, a technique was developed in which a needle is heated and pushed through the foam eartip. The electrode is then thread through the bore and advanced slowly by hand until contacting the eardrum. Analysis included comparing absorbance, admittance phase angle, and DPOAE levels between measurement conditions. RESULTS: Comparison of the absorbance and admittance phase angle measurements between the electrode placement methods revealed significantly higher absorbance and lower admittance phase angle from 0.125 to 1 kHz when the electrode is routed under the eartip. Absorbance and admittance phase angle were minimally affected when the electrode was inserted through a bore in the eartip. DPOAE levels across the different conditions showed changes approximating test-retest variability. Upon contacting the eardrum, the absorbance tended to decrease below 1 kHz and increase above 1 kHz. However, changes were within the range of test-retest variability. There was evidence of reduced levels below 1 kHz and increased levels above 1 kHz upon the electrode contacting the eardrum. However, differences between conditions approximated test-retest variability. CONCLUSIONS: Routing the eardrum electrode through the foam tip reduces the likelihood of incurring an acoustic leak between the canal walls and eartip, compared with routing the electrode under the eartip. Changes in absorbance and DPOAE levels resulting from electrode contact with the eardrum implicate potential stiffening of eardrum; however, the magnitude of changes suggests minimal effect of the electrode on sound transmission in the ear.

Interpretation of the nine-step test for Eustachian tube function should consider mastoid cavity volume.

INTRODUCTION: The modified nine-step test is a classical method for evaluating Eustachian tube function. However, clinical interpretation of the increased maximal difference in middle ear pressure (mdMEP) in the modified nine-step test is unknown. We hypothesised that the different reservoir effects of the mastoid cavity can bias the results of the modified nine-step test. METHODS: A total of 108 consecutive participants (216 ears) were retrospectively screened. Of these, 55 participants (82 ears) who met the inclusion/exclusion criteria were enrolled. The volumetric results of the mastoid cavity, parameters of the modified nine-step test (mdMEP, middle ear pressure, tympanic membrane compliance), and demographic data were analysed. RESULTS: A significant negative correlation was found between mdMEP and mastoid cavity volume (R = .467, p < .001). Ears with mdMEP >70 daPa showed poor pneumatization in the mastoid cavity, with volumes less than 3000 mm3 (10th percentile of all ears analysed). Ears with mastoid cavity volumes lower than the 25th percentile showed a significantly higher mdMEP (p < .001). Patients with mastoid cavity volumes higher than the 75th percentile were significantly younger (p < .001). Multivariate regression analysis for mdMEP showed a good fit (R = .854) using factors including middle ear pressure, admittance and, most importantly, the reciprocal of mastoid volume (Beta = 0.752, p < .001). CONCLUSIONS: The mdMEP, the main parameter of the modified nine-step test, was negatively correlated with the mastoid cavity volume. Therefore, the results of the modified nine-step test should be interpreted with consideration of mastoid cavity volume.

The influence of tympanic-membrane orientation on acoustic ear-canal quantities: A finite-element analysis.

Assuming plane waves, ear-canal acoustic quantities, collectively known as wideband acoustic immittance (WAI), are frequently used in research and in the clinic to assess the conductive status of the middle ear. Secondary applications include compensating for the ear-canal acoustics when delivering stimuli to the ear and measuring otoacoustic emissions. However, the ear canal is inherently non-uniform and terminated at an oblique angle by the conical-shaped tympanic membrane (TM), thus potentially confounding the ability of WAI quantities in characterizing the middle-ear status. This paper studies the isolated possible confounding effects of TM orientation and shape on characterizing the middle ear using WAI in human ears. That is, the non-uniform geometry of the ear canal is not considered except for that resulting from the TM orientation and shape. This is achieved using finite-element models of uniform ear canals terminated by both lumped-element and finite-element middle-ear models. In addition, the effects on stimulation and reverse-transmission quantities are investigated, including the physical significance of quantities seeking to approximate the sound pressure at the TM. The results show a relatively small effect of the TM orientation on WAI quantities, except for a distinct delay above 10 kHz, further affecting some stimulation and reverse-transmission quantities.

Measuring absorbed energy in the human auditory system using finite element models: A comparison with experimental results.

BACKGROUND: There are different ways to analyze energy absorbance (EA) in the human auditory system. In previous research, we developed a complete finite element model (FEM) of the human auditory system. OBJECTIVE: In this current work, the external auditory canal (EAC), middle ear, and inner ear (spiral cochlea, vestibule, and semi-circular canals) were modelled based on human temporal bone histological sections. METHODS: Multiple acoustic, structure, and fluid-coupled analyses were conducted using the FEM to perform harmonic analyses in the 0.1-10 kHz range. Once the FEM had been validated with published experimental data, its numerical results were used to calculate the EA or energy reflected (ER) by the tympanic membrane. This EA was also measured in clinical audiology tests which were used as a diagnostic parameter. RESULTS: A mathematical approach was developed to calculate the EA and ER, with numerical and experimental results showing adequate correlation up to 1 kHz. Another published FEM had adapted its boundary conditions to replicate experimental results. Here, we recalculated those numerical results by applying the natural boundary conditions of human hearing and found that the results almost totally agreed with our FEM. CONCLUSION: This boundary problem is frequent and problematic in experimental hearing test protocols: the more invasive they are, the more the results are affected. One of the main objectives of using FEMs is to explore how the experimental test conditions influence the results. Further work will still be required to uncover the relationship between middle ear structures and EA to clarify how to best use FEMs. Moreover, the FEM boundary conditions must be more representative in future work to ensure their adequate interpretation.

The impact of size on middle-ear sound transmission in elephants, the largest terrestrial mammal.

Elephants have a unique auditory system that is larger than any other terrestrial mammal. To quantify the impact of larger middle ear (ME) structures, we measured 3D ossicular motion and ME sound transmission in cadaveric temporal bones from both African and Asian elephants in response to air-conducted (AC) tonal pressure stimuli presented in the ear canal (PEC). Results were compared to similar measurements in humans. Velocities of the umbo (VU) and stapes (VST) were measured using a 3D laser Doppler vibrometer in the 7-13,000 Hz frequency range, stapes velocity serving as a measure of energy entering the cochlea-a proxy for hearing sensitivity. Below the elephant ME resonance frequency of about 300 Hz, the magnitude of VU/PEC was an order of magnitude greater than in human, and the magnitude of VST/PEC was 5x greater. Phase of VST/PEC above ME resonance indicated that the group delay in elephant was approximately double that of human, which may be related to the unexpectedly high magnitudes at high frequencies. A boost in sound transmission across the incus long process and stapes near 9 kHz was also observed. We discuss factors that contribute to differences in sound transmission between these two large mammals.

Material characterization of human middle ear using machine-learning-based surrogate models.

This study aims to introduce a novel non-invasive method for rapid material characterization of middle-ear structures, taking into consideration the invaluable insights provided by the mechanical properties of ear tissues. Valuable insights into various ear pathologies can be gleaned from the mechanical properties of ear tissues, yet conventional techniques for assessing these properties often entail invasive procedures that preclude their use on living patients. In this study, in the first step, we developed machine-learning models of the middle ear to predict its responses with a significantly lower computational cost in comparison to finite-element models. Leveraging findings from prior research, we focused on the most influential model parameters: the Young's modulus and thickness of the tympanic membrane and the Young's modulus of the stapedial annular ligament. The eXtreme Gradient Boosting (XGBoost) method was implemented for creating the machine-learning models. Subsequently, we combined the created machine-learning models with Bayesian optimization (BoTorch) for fast and efficient estimation of the Young's moduli of the tympanic membrane and the stapedial annular ligament. We demonstrate that the resultant surrogate models can fairly represent the vibrational responses of the umbo, stapes footplate, and vibration patterns of the tympanic membrane at most frequencies. Also, our proposed material characterization approach successfully estimated the Young's moduli of the tympanic membrane and stapedial annular ligament (separately and simultaneously) with values of mean absolute percentage error of less than 7%. The remarkable accuracy achieved through the proposed material characterization method underscores its potential for eventual clinical applications of estimating mechanical properties of the middle-ear structures for diagnostic purposes.

Visualization of bone formation in sheep's middle ear by using fluorochrome sequential labelling (FSL).

One factor for the lacking integration of the middle ear stapes footplate prosthesis or the missing healing of stapes footplate fractures could be the known osteogenic inactivity. In contrast, it was recently demonstrated that titanium prostheses with an applied collagen matrix and immobilised growth factors stimulate osteoblastic activation and differentiation on the stapes footplate. Regarding those findings, the aim of this study was to evaluate the potential of bone regeneration including bone remodeling in the middle ear. Ten one-year-old female merino sheep underwent a middle ear surgery without implantation of middle ear prostheses or any other component for activating bone formation. Post-operatively, four fluorochromes (tetracycline, alizarin complexion, calcein green and xylenol orange) were administered by subcutaneous injection at different time points after surgery (1 day: tetracycline, 7 days: alizarin, 14 days: calcein, 28 days: xylenol). After 12 weeks, the temporal bones including the lateral skull base were extracted and histologically analyzed. Fluorescence microscopy analysis of the entire stapes with the oval niche, but in particular stapes footplate and the Crura stapedis revealed evidence of new bone formation. Calcein was detected in all and xylenol in 60% of the animals. In contrast, tetracycline and alizarin could only be verified in two animals. The authors were able to demonstrate the osseoregenerative potential of the middle ear, in particular of the stapes footplate, using fluorescence sequence labelling.

Auditory sensitivity and tympanic middle ear in a vocal and a non-vocal frog.

The tympanic middle ear is important for anuran hearing on land. However, many species have partly or entirely lost their tympanic apparatus. Previous studies have compared hearing sensitivities in species that possess and lack tympanic membranes capable of sound production and acoustic communication. However, little is known about how these hearing abilities are comparable to those of mutant species. Here, we compared the eardrum and middle ear anatomies of two sympatric sibling species from a noisy stream habitat, namely the "non-vocal" Hainan torrent frog (Amolops hainanensis) and the "vocal" little torrent frog (Amolops torrentis), the latter of which is capable of acoustic communication. Our results showed that the relative (to head size) eardrum diameter of A. hainanensis was smaller than that of A. torrentis, although the absolute size was not smaller. Unlike A. torrentis, the tympanic membrane area of A. hainanensis was not clearly differentiated from the surrounding skin. The middle ear, however, was well-developed in both species. We measured the auditory brainstem responses (ABRs) of A. hainanensis and compared the ABR thresholds and latencies to those previously obtained for A. torrentis. Our results suggested that these two species exhibited significant differences in hearing sensitivity. A. hainanensis (smaller relative eardrum, nonvocal) had higher ABR thresholds and longer initial response times than A. torrentis (larger relative eardrum, vocal) at lower frequencies. Neurophysiological responses from the brain were obtained for tone pips between 800 Hz and 7,000 Hz, with peak sensitivities found at 3,000 Hz (73 dB SPL) for A. hainanensis, and at 1,800 Hz (61 dB SPL) for A. torrentis. Our results suggest that the non-vocal A. hainanensis has lower hearing sensitivity than its vocal sister species (i.e., A. torrentis), which may be related to differences in tympanic or inner ear structure and morphology.

Effects of age and noise on tympanal displacement in the Desert Locust.

Insect cuticle is an evolutionary-malleable exoskeleton that has specialised for various functions. Insects that detect the pressure component of sound bear specialised sound-capturing tympani evolved from cuticular thinning. Whilst the outer layer of insect cuticle is composed of non-living chitin, its mechanical properties change during development and aging. Here, we measured the displacements of the tympanum of the desert Locust, Schistocerca gregaria, to understand biomechanical changes as a function of age and noise-exposure. We found that the stiffness of the tympanum decreases within 12 h of noise-exposure and increases as a function of age, independent of noise-exposure. Noise-induced changes were dynamic with an increased tympanum displacement to sound within 12 h post noise-exposure. Within 24 h, however, the tone-evoked displacement of the tympanum decreased below that of control Locusts. After 48 h, the tone-evoked displacement of the tympanum was not significantly different to Locusts not exposed to noise. Tympanal displacements reduced predictably with age and repeatably noise-exposed Locusts (every three days) did not differ from their non-noise-exposed counterparts. Changes in the biomechanics of the tympanum may explain an age-dependent decrease in auditory detection in tympanal insects.

Comparison of wideband acoustic immittance in Chinese infants under three months of age with normal and abnormal middle ear function.

OBJECTIVES: This study aims to compare the characteristics of Wideband Acoustic Immittance (WAI) in Chinese infants under three months of age, with either normal or abnormal middle ear function. METHODS: We recruited 98 infants with either normal or abnormal middle ear function, and subsequently divided them into four groups based on their middle ear function and chronological age. The absorbances at tympanometric peak pressure (TPP) were collected across 1/3rd octave frequencies ranging from 226 to 8000 Hz. RESULTS: Among infants with normal middle ear function, no significant differences were observed concerning ear laterality. However, significant differences were noted at 3364 Hz and 4000 Hz with respect to age. For infants with either normal or abnormal middle ear function, we found significant differences at the majority of frequencies. Additionally, the receiver operating characteristic (ROC) curves and maxima Youden index indicated that absorbances at 1682 Hz and 1297 Hz could be employed to evaluate the middle ear function of infants at 1 and 2 months of age. CONCLUSION: This study demonstrates that WAI holds promise as a valuable tool for assessing the middle ear condition of infants at 1 and 2 months of age. Infants aged 1 and 2 years, having absorbance values equal to or greater than 0.7470 at 1682 Hz and 0.6775 at 1297 Hz respectively, may indicate normal middle ear function. Furthermore, it underscores the necessity of establishing ethnicity- and age-specific norms for WAI in infants under 3 months of age.

Assessment of middle ear structure and function with optical coherence tomography.

BACKGROUND: Current clinical tests for middle ear (ME) injuries and related conductive hearing loss (CHL) are lengthy and costly, lacking the ability to noninvasively evaluate both structure and function in real time. Optical coherence tomography (OCT) provides both, but its application to the audiological clinic is currently limited. OBJECTIVE: Adapt and use a commercial Spectral-Domain OCT (SD-OCT) to evaluate anatomy and sound-evoked vibrations of the tympanic membrane (TM) and ossicles in the human ME. MATERIALS AND METHODS: SD-OCT was used to capture high-resolution three-dimensional (3D) ME images and measure sound-induced vibrations of the TM and ossicles in fresh human temporal bones. RESULTS: The 3D images provided thickness maps of the TM. The system was, with some software adaptations, also capable of phase-sensitive vibrometry. Measurements revealed several modes of TM vibration that became more complex with frequency. Vibrations were also measured from the incus, through the TM. This quantified ME sound transmission, which is the essential measure to assess CHL. CONCLUSION AND SIGNIFICANCE: We adapted a commercial SD-OCT to visualize the anatomy and function of the human ME. OCT has the potential to revolutionize point-of-care assessment of ME disruptions that lead to CHL which are otherwise indistinguishable via otoscopy.

Inaccuracies of deterministic finite-element models of human middle ear revealed by stochastic modelling.

For over 40 years, finite-element models of the mechanics of the middle ear have been mostly deterministic in nature. Deterministic models do not take into account the effects of inter-individual variabilities on middle-ear parameters. We present a stochastic finite-element model of the human middle ear that uses variability in the model parameters to investigate the uncertainty in the model outputs (umbo, stapes, and tympanic-membrane displacements). We demonstrate: (1) uncertainties in the model parameters can be magnified by more than three times in the umbo and stapes footplate responses at frequencies above 2 kHz; (2) middle-ear models are biased and they distort the output distributions; and (3) with increased frequency, the highly-uncertain regions spatially spread out on the tympanic membrane surface. Our results assert that we should be mindful when using deterministic finite-element middle-ear models for critical tasks such as novel device developments and diagnosis.

Finite-Element Modelling Based on Optical Coherence Tomography and Corresponding X-ray MicroCT Data for Three Human Middle Ears.

PURPOSE: Optical coherence tomography (OCT) is an emerging imaging modality which is non-invasive, can be employed in vivo, and can record both anatomy and vibrations. The purpose here is to explore the application of finite-element (FE) modelling to OCT data. METHODS: We recorded vibrations for three human cadaver middle ears using OCT. We also have X-ray microCT images from the same ears. Three FE models were built based on geometries obtained from the microCT images. The material properties and boundary conditions of the models were obtained from previously reported studies. RESULTS: Tympanic-membrane (TM) vibration patterns were computed for the three models and compared with the patterns measured using OCT. Frequency responses were also computed for all three models for several locations in the middle ear and compared with the OCT displacements and with the literature. The three models were compared with each other in terms of geometry and function. Parameter sensitivity analyses were done and the results were compared among the models and with the literature. The simulated TM displacement patterns are qualitatively similar to the OCT results. The simulated displacements are closer to the OCT results for 500 Hz and 1 kHz but the differences are greater at 2 kHz. CONCLUSION: This study provides an initial look at the combined use of OCT measurements and FE modelling based on subject-specific anatomy. The geometries and parameters of the existing FE models could be modified for individual patients in the future to help identify abnormalities in the middle ear.

Finite element analysis of conductive hearing loss caused by fixation and detachment of ligament and tendon in the middle ear.

BACKGROUND AND OBJECTIVE: The fixation of ligament and tendon of the middle ear often occurs after chronic otitis media surgery. However, there are relatively few studies on the effect of ligament and tendon on sound transmission in the human middle ear. Here, the finite element model and lumped parameter model are used to study the effect of ligament and tendon fixation and detachment on sound transmission in human ear. METHODS: In this paper, the finite element model including the external auditory canal, middle ear and simplified inner ear is used to calculate and compare the middle ear frequency response of the normal and tympanosclerosis under pure tone stimulation. In addition, the lumped parametric model is taken into account to illustrate the effect of ligament and tendon stiffness on the human ear transmission system. RESULTS: The results indicate that the motion of the tympanic membrane and stapes is reduced by ligament and tendon fixation. Although ligament and tendon detachment have a limited effect in the piston-motion direction, the stability of motion in the plane perpendicular to the piston-motion direction is significantly reduced. Most significantly, the ligament and tendon fixation cause a hearing effect of about 18 dB, which is greater in the plane perpendicular to the piston-motion direction after ligament and tendon detachment than in the piston-motion direction. CONCLUSIONS: In this study, the calculation accuracy of the lumped parameter and the finite element model is studied, and the effect of ligament and tendon on hearing loss is further explored through the finite element model with high calculation accuracy, which is helpful to understand the role of ligament and tendon in the sound transmission mechanism of the human middle ear. The study of ligament and tendon on conductive hearing loss provides a reference for clinical treatment of tympanosclerosis.