Total knee arthroplasty following lateral closing-wedge high tibial osteotomy versus primary total knee arthroplasty: a propensity score matching study.

BACKGROUND: The disparity in patient-reported outcomes between total knee arthroplasty (TKA) following high tibial osteotomy (HTO) and primary TKA has yet to be fully comprehended. This study aims to compare the patient-reported outcomes, radiological parameters and complication rates between TKA following HTO and primary TKA. METHODS: Sixty-five patients who underwent TKA following lateral closing-wedge HTO were compared to a matched group of primary TKA at postoperative 6-months and 1-year. Between-group confounders of age, gender, smoking status, Body Mass index, preoperative Numeric Rating Scale (NRS) pain in rest, Knee injury and Osteoarthritis Outcome Score-Physical function Shortform (KOOS-PS), EuroQol five-dimensional (EQ-5D) overall health score, and Oxford Knee Score (OKS) were balanced by propensity score matching. Patient-reported outcome measures were NRS pain in rest, KOOS-PS, EQ-5D overall health score, and OKS. Radiological parameters were femorotibial angle, medial proximal tibial angle, anatomical lateral distal femoral angle, posterior tibial slope, and patellar height assessed by Insall-Salvati ratio. The complication rates of TKA were compared between the two groups. The HTO survival time, the choice of staple removal before or during TKA in patients who underwent TKA following HTO patients, and the rate of patellar resurfacing were assessed. The p value < 0.0125 indicates statistical significance after Bonferroni correction. RESULTS: After propensity score matching, no significant between-group differences in the patient-reported outcome measures, radiographical parameters and complication rates were found (p > 0.0125). In the TKA following HTO group, with an average HTO survival time of 8.7 years, staples were removed before TKA in 46 patients (71%) and during TKA in 19 patients, and 11 cases (17%) had patella resurfacing. In the primary TKA group, 15 cases (23%) had patella resurfacing. CONCLUSION: The short-term assessment of TKA following HTO indicates outcomes similar to primary TKA. A previous HTO does not impact the early results of subsequent TKA, suggesting that the previous HTO has minimal influence on TKA outcomes. LEVEL OF EVIDENCE: III, cohort study.

Improving standard volar plate fixation in 3D-guided corrective osteotomy of the distal radius: evaluation of a shim instrument.

Standard volar plates often do not fit the surface of the malunited distal radius after osteotomy, necessitating an offset angle for accurate volar tilt correction. The correction can be achieved if the plate is held at the correct angle when the distal screws are locked. With the advantage of 3D surgical planning and patient-specific instruments, we developed a shim instrument to assist the surgeon in securing the plate at the intended angle when locking the distal screws, and evaluated radiological results. Five female patients aged 63-74 with dorsally angulated extra-articular malunions underwent surgery using 3D-printed guides and the shim instrument. The plate position, drilling guide alignment, screw placements, and distal radius correction on postoperative CTs were compared with the surgical plans. Errors were measured using an anatomical coordinate system, and standard 2D radiographic measures were extracted. Preoperative dorsal tilt ranged from 16° to 35°, and postoperative volar tilt from 1° to 11°. 3D analysis revealed mean absolute correction errors of 6.1° in volar tilt, 1.6° in radial inclination, and 0.6 mm in ulnar variance. The volar tilt error due to the shim instrument, indicated by the mean angle error of the distal screws to the plate, was 2.1° but varied across the five patients. Settling of the distal radius, due to tension during and after reduction, further contributed to a mean loss of 3.5° in volar tilt. The shim instrument helped with securing plates at the intended angle; however, further correction improvements should consider the tension between the fragments of osteoporotic bone.

Superior Pain Reduction with Anteromedialization Tibial Tubercle Osteotomy Versus Non-Operative Management for Patellofemoral Osteoarthritis.

PURPOSE: The purpose of this study was to compare the clinical outcomes of patients with patellofemoral osteoar-thritis (PFOA) treated non-operatively with those treated operatively with an unloading anteromedialization tibial tubercle osteotomy (TTO). METHODS: A retrospective chart review was performed to identify patients with isolated PFOA who were either managed non-operatively or surgically with a TTO and who had a minimum follow-up of 2 years. Patients were surveyed with the visual analog scale (VAS) for pain, Knee Injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS-JR), Anterior Knee Pain scale (Kujala), and Tegner Activity scale. Statistical analysis included two-sample t-testing, one-way ANOVA, and bivariate analysis. RESULTS: The clinical outcomes of 49 non-operatively managed patients (mean age: 52.7 ± 11.3 years; mean follow-up: 1.7 ± 1.0 years) and 35 operatively managed patients (mean age: 31.8 ± 9.4 years; mean follow-up: 3.5 ± 1.7 years) were assessed. The mean VAS improved sig-nificantly in both groups [6.12 to 4.22 (non-operative), p < 0.0001; 6.94 to 2.45 (TTO); p < 0.0001], with operatively treated patients having significantly lower postoperative pain than non-operatively managed patients at the time of final follow-up [2.45 (TTO) vs. 4.22 (non-operative), p < 0.001]. The mean KOOS-JR score was significantly greater in the operative group at time of final follow-up [78.7 ± 11.6 (TTO) vs. 71.7 ± 17.8 (non-operative), p = 0.035]. There was no significant difference in Kujala or Tegner scores between the treatment groups. Additionally, there was no sig-nificant relationship between the number of intra-articular injections, duration of NSAID use, and number of physical therapy sessions on clinical outcomes in the non-operatively treated group (p > 0.05). CONCLUSIONS: An unloading anteromedialization TTO provides significantly better pain relief and restoration of function compared to non-operative management in the treatment of symptomatic PFOA.

Finite element analysis of the effect of tibial osteotomy on the stress of polyethylene liner in total knee arthroplasty.

AIM: To explore the effects of tibial osteotomy varus angle combined with posterior tibial slope (PTS) on the stress of polyethylene liner in total knee arthroplasty (TKA) by building finite element model (FEM). METHODS: Established the FEM of standard TKA with tibial osteotomy varus angle 0° to 9° were established and divided into 10 groups. Next, each group was created 10 FEMs with 0° to 9° PTS separately. Calculated the stress on polyethylene liner in each group in Abaqus. Finally, the relevancy between tibial osteotomy angle and polyethylene liner stress was statistically analyzed using multiple regression analysis. RESULTS: As the varus angle increased, the area of maximum stress gradually shifted medially on the polyethylene liner. As the PTS increases, the percentage of surface contact forces on the medial and lateral compartmental of the polyethylene liner gradually converge to the same. When the varus angle is between 0° and 3°, the maximum stress of the medial compartmental surfaces of polyethylene liner rises smoothly with the increase of the PTS. When the varus angle is between 4° and 9°, as the increase of the PTS, the maximum stress of polyethylene liner rises first and then falls, forming a trough at PTS 5° and then rises again. Compared to the PTS, the varus angle has a large effect on the maximum stress of the polyethylene liner (p < .001). CONCLUSION: When the varus angle is 0° to 3°, PTS 0° is recommended, which will result in a more equalized stress distribution of the polyethylene liner in TKA.

Simultaneous medial closing wedge distal femoral varus osteotomy and double-bundle anterior cruciate ligament reconstruction in the symptomatic femoral valgus deformity: A case report.

Distal femoral varus osteotomy (DFVO) is a widely recognized surgical procedure used to address valgus malalignment in patients with knee joint disorders. However, it still remains unclear whether anterior cruciate ligament (ACL) reconstruction can be performed in a single procedure along with DFVO. Herein, we present a 73-year-old female patient who developed lateral osteoarthritis of the knee with valgus alignment due to chronic ACL deficiency following a twisting injury during skiing. She was physiologically very active, and strongly demanded to return to sports. We performed a combined procedure involving a medial closing wedge DFVO using an anatomical locking plate, along with double-bundle ACL reconstruction. The postoperative radiograph confirmed successful correction of knee alignment, specifically achieving varus alignment with precise conformance of the anatomical plate to the medial contour of the distal femur following the osteotomy. The patient resumed her previous sports activities without experiencing knee pain. The operated knee demonstrated restored anterior stability, as indicated by negative Lachman test results, and regained full range of motion. Both the Knee Injury and Osteoarthritis Outcome Score and the 2011 Knee Society score demonstrated continuous postoperative improvements over the three-year follow-up period, indicating positive functional outcomes and joint preservation. To the best of our knowledge, this is the first case of medial closing wedge DFVO with anatomic double-bundle ACL reconstruction in the symptomatic femoral valgus deformity with chronic ACL deficiency in the literature.

A rare complication of tension band fixation of olecranon osteotomy: Distal migration of K-wire.

Tension band wiring (TBW) is one of the most commonly used fixation techniques to fix olecranon osteotomies. Hardware prominence has been the most commonly reported complication of TBW. However, distal migration of Kirschner (K)-wire after TBW fixation for olecranon osteotomy has not been reported. In this case report, we presented distal migration of K-wire detected nine months after initial surgery in a 46-year-old male patient. The patient was operated on for an intraarticular distal humerus fracture using an olecranon osteotomy. The osteotomy was fixed with TBW fixation. The patient missed routine follow-ups and presented to the outpatient clinic with a complaint of skin irritation at the elbow nine months after the surgery. On radiological examination, distal migration of one K-wire was detected. The K-wire was surgically removed without any complication. Physicians should be aware of possible complications of TBW and remove fixation after fracture union to avoid unexpected complications.

Electromyographic biofeedback training in a cerebral palsy patient undergoing pronator teres rerouting and brachioradialis to extensor carpi radialis brevis tendon transfer surgery: A case report.

Several surgical procedures are used to treat dynamic pronation position of the forearm and flexion deformity of the wrist in cerebral palsy. Postoperative results of pronator teres rerouting were explored, while specially designed postoperative physiotherapy and its outcomes were limited. Herein, we present a case in whom the outcomes of electromyographic biofeedback (EMG-BF) training were assessed after pronator teres rerouting and brachioradialis tendon to extensor carpi radialis brevis tendon transfer combined with derotation osteotomy. The peak value increased, while the resting value decreased for the muscles after the intervention. Range of motion, hand function, manual ability, functional independence, and quality of life levels were improved. In conclusion, EMG biofeedback training may have a positive effect on neuromuscular control of pronator teres and brachioradialis. Free use of the upper extremity and improved manual ability positively affect the activity and quality of life of the patients.

[Evaluation of the efficacy of medial open wedge high tibial osteotomy combined with anterior cruciate ligament reconstruction in the treatment of varus knee osteoarthritis with anterior cruciate ligament injury].

Objective: To evaluate the efficacy of medial open wedge high tibial osteotomy (MOWHTO) combined with anterior cruciate ligament (ACL) reconstruction in the treatment of varus knee osteoarthritis (OA) with ACL injury. Methods: A follow-up study. The study retrospectively analyzed the patients underwent MOWHTO combined with ACL reconstruction for treatment of varus knee OA with ACL injury in Tianjin Hospital between April 2018 and September 2022. The preoperative and postoperative posterior slope angle (PSA), hip-knee-ankle angle (HKA), visual analog scale (VAS) pain scores, Lysholm score, International Knee Documentation Committee (IKDC) score, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score, and Tegner score were compared. The follow-up indicators were recorded at 6 weeks, 3 months and 1 year after operation, and the complications were recorded. Results: The study included 32 patients (23 males, 9 females) with a mean age of (50.7±8.4) years. The mean follow-up time was (21.2±4.8) months. PSA increased from 9.2°±1.8° preoperatively to 11.1°±2.4° postoperatively, and HKA increased from 168.7°±2.2° to 181.5°±2.2° (both P<0.01). The indicators such as VAS score (6.8±1.1 vs 1.8±0.4), Lysholm score (52.6±7.1 vs 82.0±6.4), IKDC score (64.7±6.2 vs 80.3±10.0), WOMAC score (51.8±6.3 vs 81.8±6.5), and Tegner score (1.9±0.6 vs 5.0±1.0) were all improved after the operation (all P<0.01). Complications occurred in 5 patients (15.6%), including hematomas, sensory abnormalities, intermuscular vein thrombosis and correction angle loss. Conclusion: MOWHTO combined with ACL reconstruction is a safe and effective approach for the treatment of varus knee OA with ACL injury.

Precise execution of personalized surgical planning using three-dimensional printed guide template in severe and complex adult spinal deformity patients requiring three-column osteotomy: a retrospective, comparative matched-cohort study.

BACKGROUND: The surgical treatment of severe and complex adult spinal deformity (ASD) commonly required three-column osteotomy (3-CO), which was technically demanding with high risk of neurological deficit. Personalized three dimensional (3D)-printed guide template based on preoperative planning has been gradually applied in 3-CO procedure. The purpose of this study was to compare the efficacy, safety, and precision of 3D-printed osteotomy guide template and free-hand technique in the treatment of severe and complex ASD patients requiring 3-CO. METHODS: This was a single-centre retrospective comparative cohort study of patients with severe and complex ASD (Cobb angle of scoliosis > 80° with flexibility < 25% or focal kyphosis > 90°) who underwent posterior spinal fusion and 3-CO between January 2020 to January 2023, with a minimum 12 months follow-up. Personalized computer-assisted three-dimensional osteotomy simulation was performed for all recruited patients, who were further divided into template and non-template groups based on the application of 3D-printed osteotomy guide template according to the surgical planning. Patients in the two groups were age- and gender- propensity-matched. The radiographic parameters, postoperative neurological deficit, and precision of osteotomy execution were compared between groups. RESULTS: A total of 40 patients (age 36.53 ± 11.98 years) were retrospectively recruited, with 20 patients in each group. The preoperative focal kyphosis (FK) was 92.72° ± 36.77° in the template group and 93.47° ± 33.91° in the non-template group, with a main curve Cobb angle of 63.35° (15.00°, 92.25°) and 64.00° (20.25°, 99.20°), respectively. Following the correction surgery, there were no significant differences in postoperative FK, postoperative main curve Cobb angle, correction rate of FK (54.20% vs. 51.94%, P = 0.738), and correction rate of main curve Cobb angle (72.41% vs. 61.33%, P = 0.101) between the groups. However, the match ratio of execution to simulation osteotomy angle was significantly greater in the template group than the non-template group (coronal: 89.90% vs. 74.50%, P < 0.001; sagittal: 90.45% vs. 80.35%, P < 0.001). The operating time (ORT) was significantly shorter (359.25 ± 57.79 min vs. 398.90 ± 59.48 min, P = 0.039) and the incidence of postoperative neurological deficit (5.0% vs. 35.0%, P = 0.018) was significantly lower in the template group than the non-template group. CONCLUSION: Performing 3-CO with the assistance of personalized 3D-printed guide template could increase the precision of execution, decrease the risk of postoperative neurological deficit, and shorten the ORT in the correction surgery for severe and complex ASD. The personalized osteotomy guide had the advantages of 3D insight of the case-specific anatomy, identification of osteotomy location, and translation of the surgical planning or simulation to the real surgical site.

Transiliac-Shortening Osteotomy to Treat Ischial Pressure Injury due to Fixed Pelvic Obliquity: A Case Report.

CASE: A 17-year-old adolescent boy with Gross Motor Function Classification System 5 cerebral palsy and neuromuscular scoliosis underwent posterior spinal fusion and segmental spinal instrumentation from T3 to the pelvis. He developed a right ischial pressure injury a few months postoperatively, which persisted despite nonoperative measures. He subsequently underwent an ipsilateral transiliac-shortening osteotomy 16 months after spinal surgery to treat his residual pelvic obliquity and the ischial pressure injury, which healed completely. At the 1-year follow-up visit, there were no further signs of pressure injury. CONCLUSION: This case report describes transiliac-shortening osteotomy as a viable treatment option for non-healing ischial pressure injuries secondary to fixed pelvic obliquity.

Surgical Correction of Ischiopagus Tripus Conjoined Twins with Fused Pelvis: Enhancing Quality of Life through Orthopedic Intervention.

BACKGROUND The rarity of ischiopagus tripus conjoined twins complicates the surgical separation, owing to the lack of cases and high complexity. We aim to report our experience in performing orthopedic correction for ischiopagus tripus twins. CASE REPORT A pair of 3-year-old conjoined boys presented with a fused body at the pelvis region and only 1 umbilicus. There were 2 legs separated by shared genitalia and an anus at the midline, and 1 fused leg, which could be felt and moved by both of the patients. The twins also shared internal organs of the bladder, intestine, and rectum, as visualized through angiography computerized tomography scan. After several team discussions with the institutional review board, the hospital ethics committee, and both parents, it was agreed to perform disarticulation of the fused third limb, followed by correction of the trunk alignment by pelvic closed wedge osteotomy and internal fixation. We successfully reconstructed the pelvis using locking plates and additional 3.5-mm cortical screws and 1.2-mm stainless steel wire. CONCLUSIONS This report describes the presentation and surgical management of a case of ischiopagus tripus conjoined twins. It highlights the challenges involved in surgery and the importance of investigating these infants for other congenital abnormalities. Although surgical approaches for different sets of twins should be individually tailored, interventions aimed to provide optimal outcomes should consider ethical issues and parental/patient expectations. Even in situations in which the twins are inseparable, there is still room for surgical correction to be performed.

3D-Printed custom-made hemipelvic endoprosthetic reconstruction following periacetabular tumor resection: utilizing a novel classification system.

BACKGROUND: Customized 3D-printed pelvic implants with a porous structure have revolutionized periacetabular pelvic defect reconstruction after tumor resection, offering improved osteointegration, long-term stability, and anatomical fit. However, the lack of an established classification system hampers implementation and progress. METHODS: We formulated a novel classification system based on pelvic defect morphology and 3D-printed hemipelvis endoprostheses. It integrates surgical approach, osteotomy guide plate and prosthesis design, postoperative rehabilitation plans, and perioperative processes. RESULTS: Retrospectively analyzing 60 patients (31 males, 29 females), we classified them into Type A (15 patients: Aa = 6, Ab = 9), Type B (27 patients: Ba = 15, Bb = 12), Type C (17 patients). All underwent customized osteotomy guide plate-assisted tumor resection and 3D-printed hemipelvic endoprosthesis reconstruction. Follow-up duration was median 36.5 ± 15.0 months (range, 6 to 74 months). The mean operating time was 430.0 ± 106.7 min, intraoperative blood loss 2018.3 ± 1305.6 ml, transfusion volume 2510.0 ± 1778.1 ml. Complications occurred in 13 patients (21.7%), including poor wound healing (10.0%), deep prosthesis infection (6.7%), hip dislocation (3.3%), screw fracture (1.7%), and interface loosening (1.7%). VAS score improved from 5.5 ± 1.4 to 1.7 ± 1.3, MSTS-93 score from 14.8 ± 2.5 to 23.0 ± 5.6. Implant osseointegration success rate was 98.5% (128/130), with one Type Ba patient experiencing distal prosthesis loosening. CONCLUSION: The West China classification may supplement the Enneking and Dunham classification, enhancing interdisciplinary communication and surgical outcomes. However, further validation and wider adoption are required to confirm clinical effectiveness.

The incidence of subsequent hip arthroscopy after rectus-sparing periacetabular osteotomy.

Aims: Periacetabular osteotomy (PAO) is the preferred treatment for symptomatic acetabular dysplasia in adolescents and young adults. There remains a lack of consensus regarding whether intra-articular procedures such as labral repair or improvement of femoral offset should be performed at the time of PAO or addressed subsequent to PAO if symptoms warrant. The purpose was to determine the rate of subsequent hip arthroscopy (HA) in a contemporary cohort of patients, who underwent PAO in isolation without any intra-articular procedures. Methods: From June 2012 to March 2022, 349 rectus-sparing PAOs were performed and followed for a minimum of one year (mean 6.2 years (1 to 11)). The mean age was 24 years (14 to 46) and 88.8% were female (n = 310). Patients were evaluated at final follow-up for patient-reported outcome measures (PROMs). Clinical records were reviewed for complications or subsequent surgery. Radiographs were reviewed for the following acetabular parameters: lateral centre-edge angle, anterior centre-edge angle, acetabular index, and the alpha-angle (AA). Patients were cross-referenced from the two largest hospital systems in our area to determine if subsequent HA was performed. Descriptive statistics were used to analyze risk factors for HA. Results: A total of 16 hips (15 patients; 4.6%) underwent subsequent HA with labral repair and femoral osteochondroplasty, the most common interventions. For those with a minimum of two years of follow-up, 5.3% (n = 14) underwent subsequent HA. No hips underwent total hip arthroplasty and one revision PAO was performed. Overall, 17 hips (4.9%) experienced a complication and 99 (26.9%) underwent hardware removal. All PROMs improved significantly postoperatively. Radiologically, 80% of hips (n = 279) reached the goal for acetabular correction (77% for acetbular index and 93% for LCEA), with no significant differences between those who underwent subsequent HA and those who did not. Conclusion: Rectus-sparing PAO is associated with a low rate of subsequent HA for intra-articular pathology at a mean of 6.2 years' follow-up (1 to 11). Acetabular correction alone may be sufficient as the primary intervention for the majority of patients with symptomatic acetabular dysplasia.

Outcomes of Ulnar Shortening Osteotomy with an Intramedullary Bone Graft for Idiopathic Ulnar Impaction Syndrome.

Background: Although several techniques for the treatment of ulnar impaction syndrome (UIS) have been introduced, there have still been reports on various complications such as delayed union, nonunion, refracture, wrist pain, plate irritation, and chronic regional pain syndrome. This study aimed to compare the differences in radiological and clinical outcomes of patients in which intramedullary bone grafting was performed in addition to plate stabilization with those without additional bone grafting during ulnar shortening osteotomies (USOs). Methods: Between November 2014 and June 2021, 53 wrists of 50 patients with idiopathic UIS were retrospectively reviewed. Patients were divided into 2 groups according to whether intramedullary bone grafting was performed. Among the 53 wrists, USO with an intramedullary bone graft was performed in 21 wrists and USO without an intramedullary bone graft was performed in 32 wrists. Demographic data and factors potentially associated with bone union time were analyzed. Results: There was no significant difference between the 2 groups when comparing postoperative radioulnar distance, postoperative ulnar variance, amount of ulnar shortening, and postoperative Disabilities of the Arm, Shoulder and Hand score. Compared to the without-intramedullary bone graft group, bone union time of the osteotomy site was significantly shortened, from 8.8 ± 3.0 weeks to 6.7 ± 1.3 weeks in the with-intramedullary bone graft group. Moreover, there were no cases of nonunion or plate-induced symptoms. Both in univariable and multivariable analyses, intramedullary bone grafting was associated with shorter bone union time. Conclusions: USO with an intramedullary bone graft for idiopathic UIS has favorable radiological and clinical outcomes. The advantage of this technique is the significant shortening of bone union time.

Medial patellar ligament reconstruction in combination with derotational distal femoral osteotomy for treating recurrent patellar dislocation in the presence of increased femoral anteversion: a systematic review.

BACKGROUND: Medial patellar ligament reconstruction (MPFL-R) in combination with derotational distal femoral osteotomy (DDFO) for treating recurrent patellar dislocation (RPD) in the presence of increased femoral anteversion is one of the most commonly used surgical techniques in the current clinical practice. However, there are limited studies on the clinical outcomes of MPFL-R in combination with DDFO to treat RPD in the presence of increased femoral anteversion. PURPOSE: To study the role of MPFL-R in combination with DDFO in the treatment of RPD in the presence of increased femoral anteversion. METHODS: A systematic review was performed according to the PRISMA guidelines by searching the Medline, Embase, Web of Science, and Cochrane Library databases through June 1, 2023. Studies of patients who received MPFL-R in combination with DDFO after presenting with RPD and increased femoral anteversion were included. Methodological quality was assessed using the MINORS (Methodological Index for Nonrandomized Studies) score. Each study's basic characteristics, including characteristic information, radiological parameters, surgical techniques, patient-reported outcomes, and complications, were recorded and analyzed. RESULTS: A total of 6 studies with 231 patients (236 knees) were included. Sample sizes ranged from 12 to 162 patients, and the majority of the patients were female (range, 67-100%). The mean age and follow-up ranges were 18 to 24 years and 16 to 49 months, respectively. The mean femoral anteversion decreased significantly from 34° preoperatively to 12° postoperatively. In studies reporting preoperative and postoperative outcomes, significant improvements were found in the Lysholm score, Kujala score, International Knee Documentation Committee score, and visual analog scale for pain. Postoperative complications were reported in all studies, with an overall reported complication rate of 4.7%, but no redislocations occurred during the follow-up period. CONCLUSION: For RPD with increased femoral anteversion, MPFL-R in combination with DDFO leads to a good clinical outcome and a low redislocation rate. However, there was no consensus among researchers on the indications for MPFL-R combined with DDFO in the treatment of RPD.

[Patient-specific cutting guides in corrective osteotomy near to the knee joint]. / Patientenspezifische Schnittblöcke bei kniegelenknahen Korrekturosteotomien.

OBJECTIVE: Patient-specific cutting guides (PSCG) are used in osteotomy near to the knee joint to simplify the operative technique, shorten the duration of surgery, reduce radiation exposure and to exactly realize the preoperative planning during surgery, especially when complex deformities are corrected simultaneously in multiple planes. INDICATIONS: The application of PSCG is in principle possible in all osteotomies near to the knee joint but is especially useful in multidimensional, complex osteotomy. CONTRAINDICATIONS: No specific contraindications. SURGICAL TECHNIQUE: After multidimensional 3D analysis and planning using a preoperative computed tomography (CT) protocol, a 3D-printed patient-specific cutting guide is produced. This PSCG is used during standard osteotomy near to the knee. Using this PSCG the guided sawcut and predrilling of the screw positions inside the bone for the screws of the planned angle stable osteotomy plate are performed. The amount of the deformity correction needed is "stored" in the PSCG and is converted to the bony geometry during placement of the screws in the predrilled holes through the plate after opening or closing the osteotomy. Apart from that, the surgical approach and technique are equivalent to the standard osteotomy types near to the knee. POSTOPERATIVE MANAGEMENT: The application of PSCG in osteotomy near to the knee does not change the postoperative management of the specific osteotomy. RESULTS: The use of patient-specific cutting guides leads to a higher accuracy in the implementation of the preoperative planning and the desired target axis is achieved with greater accuracy. Multidimensional complex corrections can also be exactly planned and implemented. In addition, the intraoperative radiation exposure for the operation team can possibly be reduced.

[Subtuberosity anterior closing wedge osteotomy to correct the increased posterior slope of the tibial plateau]. / Subtuberositäre anterior schließende Osteotomie zur Korrektur der erhöhten posterioren Reklination des Tibiaplateaus.

OBJECTIVE: Reduction of increased reclination of the tibial plateau (posterior slope) to improve the anterior stability of the knee joint. INDICATIONS: Increased posterior reclination of the tibial plateau greater than 12° in combination with recurrent instability after anterior cruciate ligament (ACL) reconstruction. CONTRAINDICATIONS: Hyperextension of more than 15° (relative). SURGICAL TECHNIQUE: Anterior skin incision approximately 8-10 cm above the tibial tuberosity. Insertion of two converging guidewires directly below the patellar tendon ending obliquely in the area of the posterior cruciate ligament (PCL) insertion. Control of the wire position with the image intensifier core. Oscillating saw osteotomy. Removal of the wedge and closure of the osteotomy. Osteosynthesis with interfragmentary screw and medial angle-stable plate. POSTOPERATIVE MANAGEMENT: Partial load with 10-20 kg for 2 weeks, then step by step increase in load. Mobility: free. RESULTS: To date we have operated on 36 patients with recurrent instability after ACL reconstruction (20 men, 16 women, average age 34.4 years) in the manner described in this article. In 25 cases, enlarged bone tunnels were filled with allogeneic bone at the same time. The posterior slope of the tibial plateau could be reduced from an average of 14.5° to 8.8°. In 28 cases another ACL reconstruction was performed after an interval of 4-12 months. The Lysholm score significantly increased from 76.3 points to 89.2 points.

Comparative analysis of gait: Similar coronal but different sagittal effects between closing-wedge and opening-wedge high tibial osteotomy.

BACKGROUND: High tibial osteotomy is an established surgical option for medial compartment osteoarthritis of the knee with varus alignment. It can be divided into open wedge and closing wedge by operative technique. Although they have fundamental differences, little is known about the biomechanical consequences of the two surgical methods. METHODS: Thirty-eight patients with medial compartment osteoarthritis who underwent high tibial osteotomy (19 open-wedge and 19 closing-wedge) were retrospectively reviewed. Clinical scores and radiological measurements were assessed until postoperative two years. Gait analysis was performed preoperatively and again at postoperative one year. FINDINGS: Varus alignment was corrected in both groups without a significant difference between them (p = 0.543). However, posterior tibial slope was higher, and the Blackburne-Peel ratio was lower in the open wedge osteotomy group after surgery (both p < 0.001). Reduction of dynamic knee varus and knee adduction moment were observed in both groups without significant differences. However, after surgery, average knee range of motion (63.3° vs 57.3°, p < 0.001) and the magnitude of knee flexion moment was significantly lower (p = 0.005) in the closing wedge group. There were no significant differences in the Kujala Anterior Knee Pain Scale and the occurrence of patellofemoral arthritis between the groups postoperatively. INTERPRETATION: After osteotomy, a smaller average knee range of motion in the sagittal plane and a higher knee flexion moment were observed in the open wedge osteotomy group, suggesting quadriceps muscle avoidance. However, no differences in clinical scores or the short-term occurrence of patellofemoral arthritis were noted between the two surgical techniques.

The osteocutaneous radial forearm free flap: A pictorial essay.

The osteocutaneous radial forearm free flap (OCRFFF) is a versatile flap with the ability to reconstruct complex defects. We detail the techniques necessary to harvest an OCRFFF, including an outline on making 90-degree osteotomies to maximize bone harvest. In this pictorial essay, we provide illustrations of the anatomy and surgical techniques necessary for OCRFFF harvest. Detailed discussion is provided on how to protect the perforators to the bone and the approach to making osteotomies in a 90-degree fashion. The approach for prophylactic plating of the radius to prevent radius fractures is outlined. A case presentation on the real-life utilization of this flap is included. The OCRFFF is an excellent head and neck reconstructive option. While there are limitations to its use for patients requiring dental rehabilitation or long/anterior mandibular defects, for the right patient and indication it has shown great success in reconstructive efforts.