The impact of addition of pearl millet starch-germ complex in white bread on nutritional, textural, structural, and glycaemic response: Single blinded randomized controlled trial in healthy and pre-diabetic participants.

The rise of pre-diabetes at the global level has created a significant interest in developing low glycaemic index food products. The pearl millet is a cheaper source of starch and its germ contains significant amount of protein and fat. The complexing of pearl millet starch and germ by dry heat treatment (PMSGH) resulted an increase in the resistant starch content upto 45.09 % due to formation of amylose-glutelin-linoleic acid complex. The resulting pearl millet starch germ complex was incorporated into wheat bread at 20, 25, and 30 %. The PMSGH incorporated into bread at 30 % reduced the glycaemic index to 52.31. The PMSGH incorporated bread had significantly (p < 0.05)increased in the hardness with a reduction in springiness and cohesiveness. The structural attributes of the 30 % PMSGH incorporated bread revealed a significant (p < 0.05)increase in 1040/1020 cm-1 ratio and relative crystallinity. The consumption of functional bread incorporated with pearl millet starch germ complex reduced blood glucose levels and in vivo glycaemic index in healthy and pre-diabetic participants when compared to white bread. Hence, the study showed that the incorporation of pearl millet starch-germ complex into food products could be a potential new and healthier approach for improving dietary options in pre-diabetes care.

Evaluating the 3D printability of pearl millet flour with banana pulp blends.

BACKGROUND: Three-dimensional (3D) food printing is a promising method for developing nutritious snack foods with complex and customized structures. In this study, to develop a pearl millet-based snack formulation, the printability of pearl millet flour (PMF) was assessed, without and with the addition of banana pulp (BP), a natural taste and flavor enhancer, at five different levels (PMF:BP of 100:0, 80:20, 60:40, 40:60, 20:80 and 0:100). RESULTS: The water activity significantly decreased with increases in the proportion of BP; higher water activity was exhibited at 100:0 (0.99). The BP proportion influences all the color values (redness: 2-11; yellowness: 17-31.87; total color difference: 2-17). All formulations exhibited shear-thinning behavior (n = 0.02-0.49) and higher hardness (0.2-0.4 N), but not all were printable. A significant decrease in adhesiveness (-0.2 to -0.03 N s) and higher storage modulus (2000-6000 Pa) occurred with an increased proportion of BP. Findings from detailed rheological behavior assessment (static, dynamic and three-interval thixotropy tests) better correlated with trends observed during 3D extrusion printing. The highest yield stress was attained (80 Pa) in the 100:0 formulation. From the thixotropy test, more deformation (>80%) and recovery (>100%) were attained by three of the formulations (100:0, 80:20, 60:40). Overall, the best constructs were obtained (based on the visual sensory characteristics) for the 60:40 formulation printed at 600 mm min-1 printing speed and 240 rpm extrusion motor speed through a 1.22 mm nozzle. CONCLUSION: The findings of this work will provide valuable insights into the development of novel millet-based 3D printed foods. © 2024 Society of Chemical Industry.

Germinated and non-germinated cooked whole millet (Pennisetum glaucum (L.) R. Br.) flours show a promising effect on protein quality, biochemical profile and intestinal health in vivo.

Millet is a promising cereal with high amounts of dietary fibre and protein, and in addition, bioactive compounds with health-promoting functional properties. This study aimed to evaluate the effect of germinated and cooked whole millet flour (Pennisetum glaucum (L.) R. Br.) on protein quality, biochemical profile and intestinal health in vivo. Thirty-two male Wistar rats (21 days old) were separated into four groups, which received a casein control diet (CC; n = 8), a free protein diet (aproteic; n = 8) and two treatment diets: non-germinated millet (NM; n = 8) and germinated millet (GM; n = 8) for 29 days. The whole millet flours presented an adequate essential amino acid profile, except for lysine. The GM group presented a higher protein efficiency ratio and net protein ratio compared to the NM group. Weight gain, Lee index, and food efficiency ratio were lower in the treatment groups, compared to the control group. The GM group had lower plasma glucose, uric acid, cholesterol, and faecal pH compared to the other groups. The treatment groups presented lower triglyceride levels, higher levels of acetic and propionic acids, a larger thickness and depth of the colonic crypts, and a higher expression of PepT1 genes than the CC group. In conclusion, the millet flours demonstrated potential for controlling the lipid profile and biometric measurements. Additionally, the whole germinated millet flour provided better protein quality and improved intestinal morphology and functionality. These results indicate that the consumption of millet could be increased in human food, and considering its potential health benefits, it could be an alternative for dietary diversification, and germination is a good processing option.

Effect of thermal treatments on the matrix components, inherent glycemic potential, and bioaccessibility of phenolics and micronutrients in pearl millet rotis.

Pearl millet (PM) is a nutri-cereal rich in various macro and micronutrients required for a balanced diet. Its grains have a unique phenolic and micronutrient composition; however, the lower bioaccessibility of nutrients and rancidity of flour during storage are the major constraints in its consumption and wide popularity. Here, to explore the effect of different thermal processing methods, i.e., hydrothermal (HT), microwave (MW), and infrared (IR) treatments, on the digestion of starch, phenolics, and microelements (Fe and Zn), an in vitro digestion model consisting of oral, gastric and intestinal digestion was applied to PM rotis. The hydrothermally treated PM roti was promising as it showed lower inherent glycemic potential (60.4%) than the untreated sample (72.4%) and less enzymatic activities associated with rancidity in PM flour. FTIR revealed an increased ratio of 1047/1022 cm-1 in the hydrothermally treated sample, reflecting the enhancement of the structurally ordered degree and compactness of starch compared to other thermal treatments. A tighter and more compact microstructure with an agglomeration of starch in the hydrothermally treated PM flour was observed by SEM. These structural changes could provide a better understanding of the lower starch digestion rate in the hydrothermally treated flour. However, HT treatment significantly (P < 0.05) reduced the bioaccessibility of phenolics (10.6%) compared to native PM rotis and slightly reduced the Fe (2%) and Zn (3.2%) bioaccessibility present in PM rotis.

Nutritional and health-promoting attributes of millet: current and future perspectives.

Millet is consumed as a staple food, particularly in developing countries, is part of the traditional diet in a number of relatively affluent countries, and is gaining popularity throughout the world. It is a valuable dietary energy source. In addition to high caloric value, several health-promoting attributes have been reported for millet seeds. This review describes many nutritional characteristics of millet seeds and their derivatives that are important to human health: antioxidant, antihypertensive, immunomodulatory or anti-inflammatory, antibacterial or antimicrobial, hypocholesterolemic, hypoglycemic, and anti-carcinogenic potential, and their role as modulators of gut health. There are several varieties, but the main focus of this review is on pearl millet (Cenchrus americanus [synonym Pennisetum glaucum]), one of the most widely eaten millet crops grown in India, though other millet types are also covered. In this article, the health-promoting properties of the natural components (ie, proteins, peptides, polyphenols, polysaccharides, oil, isoflavones, etc.) present in millet seeds are discussed. Although many of these health benefits have been demonstrated using animal models in vitro studies, human intervention-feeding trials are required to confirm several of the potential health benefits of millet seeds. Based on the nutritional and health-promoting attributes known for pearl millet (discussed in this review), finger millet and foxtail millet are suggested as good candidates for use in future nutritional interventions for improved human health.

A study on the structural, physicochemical, rheological and thermal properties of high hydrostatic pressurized pearl millet starch.

Starch in native form has limited application due to functional and physicochemical characteristics. To overcome these limitations, starch can be modified by non-thermal technologies such as high hydrostatic pressure (HHP). This study investigates high-pressure-induced gelatinization and the effect of this process on the structural, functional, morphological, pasting, thermal, physical and rheological properties of millet starch. The suspension of millet starch and water was pressurized at 200, 400 and 600 MPa for 10, 20 and 30 min to modify the starch in terms of structure, morphology, some physicochemical and rheological properties. Swelling strength and starch solubility decreased as a result of treatment with HHP. All treatments caused to increase in water holding capacity of the starch (from 0.66 % for native starch to 2.19 % for 600 MPa-30 min). Thermal analysis showed a decrease in gelatinization temperature and enthalpy of gelatinization and the pasting properties showed a decrease in the peak viscosity after HHP treatment. In addition, HHP treatment caused to increase in the hydration ability of starch by creating porosity and gaps in the granule surface and increasing the specific surface area. HHP application resulted in an increase in the peak time and pasting temperature and a decrease in breakdown and peak viscosities, final viscosity and setback viscosity in comparison with native starch of millet. The starch sample treated with 600 MPa for 30 min had the lowest syneresis and retrogradation ability. Increasing pressure and the time led to an increase in the elastic nature of the starch samples. According to the results, it is possible to increase usage area of starches in the food industry by improving its technological with HHP. This green physical technology can influence the quality parameters of starch, which can provide benefits for product machining and economic purposes.

Effect of physicochemical properties on popping characteristics of selected pearl millet varieties.

BACKGROUND: Pearl millet, commonly known as 'Bajra', is a nutrigrain, mostly used in pulverized form to make unleavened pancakes, dumplings, porridge, etc., in India. Popping, a traditional method of millet processing, is used in making ready-to-eat snacks. Pearl millet is underutilized in India. The present work aims to study the effect of the parameters of pearl millet such as variety, chemical composition, pericarp thickness, amylose content, and processing temperature on the volume expansion ratio and sensory properties of popped pearl millet. METHODOLOGY: A conventional salt-popping technique was used at three different temperatures (220 °C, 240 °C, and 260 °C) for five pearl millet varieties (ABPC 4-3, AHB 1269, AHB 1666, AIMP 92901, and PPC-6). Parameters such as color, diameter, density, amylose content, pericarp thickness, and proximate composition were analyzed. Popping characteristics such as volume expansion ratio, popping yield, and sensory properties of popped grains were studied. RESULTS: It was observed that pericarp thickness and amylose content were positively correlated with the popping qualities of grains. AIMP 92901 offered more desirable properties such as suitable moisture content (87.5 g kg-1 ), lowest equivalent diameter (2.07 mm), highest bulk density (0.84 g cm-3 ), true density (1.41 g cm-3 ), pericarp thickness (30.82 µm), and amylose content (19.75 g kg-1 ) than the other varieties that were studied. Hence, the highest popping yield (72.83%) and expansion ratio (6.15) was observed in the AIMP 92901 pearl millet variety at 260 °C. CONCLUSION: Conventional salt popping at 260 °C yielded the best popping characteristics. Pearl millet variety AIMP-92 901 developed by VNMKV (Vasantrao Naik Marathwada Krishi Vidyapeeth, Parbhani), Parbhani was found to have more desirable popping characteristics (in terms of all the parameters explained in results). © 2022 Society of Chemical Industry.

Boosting the value of insoluble dietary fiber to increase gut fermentability through food processing.

Insoluble dietary fibers are typically known to be poorly fermented in the large intestine. However, their value may be high as evidence shows that important butyrogenic bacteria preferentially utilize insoluble substrates to support their energy needs. The objective of this study was to increase fermentability of an insoluble bran fiber (pearl millet) while keeping it mostly insoluble to promote bacteria in the community that rely on fermentable insoluble dietary fibers. Following pretests with different processing methods, a combination of microwave and enzymatic treatments were applied to isolated pearl millet fiber to increase its accessibility of gut bacteria. In vitro human fecal fermentation was conducted and analyses were made for short chain fatty acids and microbiota changes. Combined microwave and enzymatic processing increased the amount of insoluble fiber fermented in vitro from 36 to 59% of total dietary fiber, with a minor increase in soluble fiber (8%). Microwave/enzymatic processing doubled butyrate production and almost tripled acetate production at 6 h fermentation compared to the native millet fiber. 16S rRNA gene sequencing showed that the processing promoted a significant increase in Firmicutes/Bacteroidetes ratio compared to the native fiber with relative abundance increases in Blautia and Copprococcus genera and a decrease in Bacteroidetes. Overall, these data show that processing techniques can be used to increase the value of insoluble fiber, presumably by increasing accessibility of the fiber to degrading bacteria, and to support Firmicutes that preferentially compete on insoluble fibers.

Development and characterisation of packaging film from Napier cellulose nanowhisker reinforced polylactic acid (PLA) bionanocomposites.

A packaging material that is environment-friendly with excellent mechanical and physicochemical properties, biodegradable and ultraviolet (UV) protection and thermal stability was prepared to reduce plastic waste. Six different concentrations of Pennisetum purpureum/Napier cellulose nanowhiskers (NWCs) (i.e. 0, 0.5, 1.0, 1.5, 2.0, and 3.0 wt%) were used to reinforce polylactic acid (PLA) by a solvent casting method. The resulting bionanocomposite film samples were characterised in terms of their morphology, chemical structure, crystallinity, thermal degradation and stability, light transmittance, water absorption, biodegradability, and physical and mechanical properties. Field-emission scanning electron microscopy showed the excellent dispersion of NWC in the PLA matrix occurred with NWC concentrations of 0.5-1.5 wt%. All the bionanocomposite film samples exhibited good thermal stability at approximately 343-359 °C. The highest water absorption was 1.94%. The lowest transparency at λ800 was 16.16% for the PLA/3.0% NWC bionanocomposite film, which also has the lowest UVA and UVB transmittance of 7.49% and 4.02%, respectively, making it suitable for packaging materials. The PLA/1.0% NWC film exhibited the highest crystallinity of 50.09% and high tensile strength and tensile modulus of 21.22 MPa and 11.35 MPa, respectively.

Starch molecular configuration and starch-sugar homeostasis: Key determinants of sweet sensory perception and starch hydrolysis in pearl millet (Pennisetum glaucum).

Starch-sugar homeostasis and starch molecular configuration regulates the dynamics of starch digestibility which result in sweet sensory perception and eliciting glycemic response, which has been measured in vitro as inherent glycemic potential (IGP). The objective of the research was to understand the key determinants of IGP as well as sweetness in different Pearl millet (PM) genotypes. To understand the intricate balance between starch and sugar, total starch content (TSC) and total soluble sugars (TSS) were evaluated. Higher concentrations of TSC (67.8%), TSS (2.75%), glucose (0.78%) and sucrose (1.68%) were found in Jafarabadi Bajra. Considering the role of compact molecular configuration of starch towards digestibility, X-ray powder diffraction (XRD) analysis was performed. A-type crystallinity with crystallinity degree (CD %) ranged from 53.53-62.63% among different genotypes, where the least CD% (53.53%) was found in Jafarabadi Bajra. In vitro starch hydrolyzation kinetics carried out to determine IGP, revealed a maximum of 77.05% IGP with minimum 1.42% resistant starch (RS) in Jafarabadi Bajra. Overall our results suggest higher sweet sensory perception of Jafarabadi Bajra which is contributed by the matrix composition with least molecular compactness of starch. Also, the interdependence among starch quality parameters; CD%, IGP, RS and amylose has also been discussed.

Evaluation of biological and chemical additives on microbial community, fermentation characteristics, aerobic stability, and in vitro gas production of SuMu No. 2 elephant grass.

BACKGROUND: The study was conducted to evaluate the effects of biological and chemical additives on microbial community, fermentation characteristics, aerobic stability, and in vitro gas production of SuMu No. 2 elephant grass. RESULTS: Aerobic bacteria and yeast were not affected on days 5 and 7 but were significantly (P < 0.224) reduced on days 14, 30, and 60, whereas lactic acid and lactic acid bacteria were significantly (P > 0.001) higher in all ensiling days within all treatment groups. During the ensiling days, the pH, acetic acid, butyric acid, and yeast were decreased in all treatment groups, whereas the Lactobacillus plantarum group and L. plantarum + natamycin group were highly significantly (P > 0.001) decreased. During air exposure, the water-soluble carbohydrates, ammonia nitrogen, lactic acid, and acetic acid were not affected on days 1-4, whereas pH and aerobic bacteria (were significantly (P < 0.05) increased on days 2-4. The addition of Lactobacillus plantarum and natamycin increased the gas production, in vitro dry matter digestibility, and in vitro neutral detergent fiber of SuMu No. 2 elephant grass silages. CONCLUSIONS: The addition of biological and chemical additives, such as L. plantrum alone and the combination with natamycin, affected the undesirable microbial community, fermentation characteristics, aerobic stability, and in vitro gas of SuMu No. 2 elephant grass. © 2021 Society of Chemical Industry.

Effects of supplementing sow diets during late gestation with Pennisetum purpureum on antioxidant indices, immune parameters and faecal microbiota.

The purpose of this study was to investigate the effects of adding Pennisetum purpureum (P. purpureum, also known as Napier grass or elephant grass) to the diets of late gestation on the antioxidant indexes, immune indexes and faecal microbiota of sows. At the 90 days of gestation, 300 healthy sows were randomly divided into three groups, and they received the basic commercial diet or added 5% P. purpureum and 10% P. purpureum, respectively. The experiment started from 90 days of gestation to parturition. The results showed that the total antioxidant capacity, immunoglobulins and serum equol concentrations of sows on 100 days of gestation and at parturition increased linearly (p < .05) with the increase of the content of P. purpureum in the gestation diet. The 5% P. purpureum increased the relative abundance of Bacteroidetes (p = .027) and Actinobacteria (p < .001) at phylum level, Coriobacteriaceae (p < .001) at family level and Prevotellaceae_UCG_001 (p = .004) at genus level, and decreased the relative abundance of Escherichia_Shigella (p < .001) at genus level. In summary, this study shows that the additive of P. purpureum can increase the concentration of serum equol, improve the antioxidant capacity and immune function of sow in late gestation. In addition, the additive of 5% P. purpureum in the diet might change the composition of intestinal microbiota of sows, particularly the relative abundance of Coriobacteriaceae (p < .001) increased.

Dwarf versus tall elephant grass in sheep feed: which one is the most recommended for cut-and-carry?

Tall- and dwarf-sized elephant grass cultivars have been developed for cut-and-carry system. Dwarf clones have better digestibility; on the other hand, tall-sized cultivars are more productive. The aim was to verify which grass would be most recommended for cut-and-carry: tall-sized (Elephant B and IRI-381) or dwarf (Taiwan A-146 2.37 and Mott) elephant grass cultivars to feed 24 male sheep, aged between 4 and 5 months, uncastrated, weighing approximately 24.08 ± 1.76 kg body weight which were sampled on intake, digestibility, performance, ingestive behavior, nitrogen balance, microbial protein synthesis, metabolic parameters, and ruminal degradability. This research was divided into two experiments: experiment 1 lasted 38 days, seven for adaptation and 31 for data collection. Elephant grass cultivars were supplied with a mineral mixture. Data collected were intake, digestibility, ingestive behavior, metabolic parameters, microbial protein synthesis, and performance submitted to a completely randomized design. For experiment 2, three rumen fistulae animals were sampled, lasting 20 days. In this case, a randomized block in split-plot design was applied. Both designs were with P < 0.05 and analyzed through SAS statistical software. Mott and Taiwan A-146 2.37 cultivars provided greater intake, digestibility, weight gain, feeding time, nitrogen retention, production and efficiency of microbial protein synthesis, dry matter (DM) and neutral detergent fiber (NDF) degradability, and DM, crude protein, and NDF, but shorter rumination time rather than Elephant B and IRI-381. There was also a significant difference for glucose, triglycerides, plasma urea, total serum protein, urinary urea (mg/L), and urea excretion in urine (mg/day). Dwarf elephant grass cultivars as Mott and Taiwan A-146 2.37 have greater nutritional value than tall-sized Elephant B and IRI-381. Dwarf elephant grass is recommended for cut-and-carry system.

Effects of king grass and sugarcane top in the absence or presence of exogenous enzymes on the growth performance and rumen microbiota diversity of goats.

In the present study, the feasibility of sugarcane top (ST) application in the goat's diet was evaluated. A total of 20 goats were randomly divided into four groups. The dietary treatments were set as follows: animals were fed with king grass (KG), KG with exogenous enzymes (KGE), ST, and ST with exogenous enzymes (STE). The animals were given free access to feed and water. After 15 days of adaptation and 60 days of the experiment, the growth performance, plasma parameters, and rumen microbiota of goats were assessed. The results showed that the KG, ST, and exogenous enzyme supplement had no significant effects on the growth performance and plasma parameters. The diet affected the rumen microbiota diversity and structure, and the alpha and beta diversity in the animals fed with ST were dramatically greater compared with the animals fed with KG. The abundances of Proteobacteria, Cyanobacteria, and Elusimicrobia were significantly decreased in the animals fed with KG or KGE, while the abundances of Firmicutes and Euryarchaeota were significantly higher in the animals fed with KG or KGE. Furthermore, the microbial communities were also different at the genus level. Moreover, the exogenous enzymes had a slight effect on rumen microbiota. Linear discriminant analysis effect size (LEfSe) analysis showed that the greatest differences were found in bacterial taxa, and these specific taxa could be used as biomarkers to distinguish rumen microbiota. Phylogenetic Investigation of Communities by Reconstruction of Unobserved States (PICRUSt) functional profile prediction indicated that the dietary treatments of ST and KG could also alter the gene expression pattern in nutrient and energy metabolism, as well as replication and repair of genetic information pathways. Collectively, the dietary treatments of KG and ST in the absence or presence of exogenous enzymes had similar effects on the growth performance and plasma parameters of goats. Besides, the KG and ST diets could affect the rumen microbiota community and function of goats. Therefore, ST could be used as a promising alternative feed resource for ruminants without the addition of exogenous enzymes in tropical regions.

Effect of quarry activities on selected biological resources around quarry site within Onigambari forest plantation, Oyo State, Nigeria.

Quarry activities are creating diverse stress on biological resources in the rural areas where most of them are located globally. In this study, the effect of quarry activities on elephant grass (Pennisetum purpureum) leaves and soils around Onigambari Forest Reserve, Oyo State, Nigeria, were investigated. Soil and samples of elephant grass (Pennisetum purpureum) leaves were collected from two different distances from the quarry plant. Samples used as control were collected within the boundary of Cocoa Research Institute of Nigeria (CRIN), Oyo State, Nigeria estate. Samples were analysed using proton-induced X-ray emission, to determine the elements. The physiochemical parameters were also analysed in both soil and leaves samples. The mean concentration of the elements in the soil sample from Site 1 was higher in Mg, Cl, Ca, Ti, Cr, Mn, Fe, Zn and Zr than Site 2 and the control site. While in leaves, similar trend was observed. Cd and Ag were highly enriched.

Environmental application of magnetic cellulose derived from Pennisetum sinese Roxb for efficient tetracycline removal.

Pennisetum sinese Roxb is a kind of forage with high yield and high quality. However, because only the leaves are used as feed, most straw is discarded or burned, causing pollution and resources waste. In this study, a magnetic cellulose adsorbent produced by extracting cellulose from Pennisetum sinese Roxb straw was used to adsorb antibiotic tetracycline (TC) from water and can be easily separated. The physicochemical properties of the obtained cellulose samples were studied. The adsorption process was mediated by multiple mechanisms including intra-particle diffusion, chemical ion exchange, hydrogen bonding, and electrostatic interaction. We determined the optimal pH, contact time, initial TC concentration, and temperature before investigating the effects of humic acid and ionic strength on the adsorption process. Our results demonstrate that the magnetic cellulose is a promising adsorbent for the removal of TC from water and is worth to be studied further to develop real-world implementation strategies.

Effects of digestate on biomass of a selected energy crop and soil properties.

BACKGROUND: A large number of digestates have not been fully utilized due to a lack of scientific, reasonable guidance, as well as imperfect technology. Hybrid giant Napier has great potential for use as a type of energy plant. As such, this study investigated the effects of digestate on the growth of a candidate energy crop and examined whether digestate was an ecologically viable means for soil restoration. RESULTS: The results showed that the total yields of all treatment groups receiving irrigation of digestate were higher (5.19-26.00%) than those of the control. The total phosphorus, total potassium, available nitrogen, available phosphorus, and available potassium content of the soil had also increased after digestate application, compared with the control. Urease activities for all treatments increased 15.28 to 69.44% more than that of the corresponding control. Soil dissolved organic matter (DOM) mainly contained humic-like and fulvic-like components through the application of digestate. More fluorescent components were also identified by two-dimensional correlation spectroscopy (2D-COS). These fluorescent components can improve the aromaticity and molecular weight of soil DOM so as to improve soil quality. CONCLUSIONS: Digestate improved not only the aboveground biomass accumulation, but also the chemical properties of the soil, which was an appropriate strategy for restoring soil quality and contributing to the sustainable development of marginal. The long-term impact of digestate application on soil quality will require additional long-term experiments. © 2020 Society of Chemical Industry.

Preparation and catalytic performance of biomass-based solid acid catalyst from Pennisetum sinense for cellulose hydrolysis.

As a kind of lignocellulosic biomass, Pennisetum sinense (P. sinense) is commonly used as animal feed, fertilizer or papermaking raw materials. Based on the high carbon content and renewability of P. sinense, we explored the possibility and feasibility of using it as catalyst matrix. The catalyst was produced by sulfonation of char obtained from the carbonization of P. sinense at 550 °C. The structure of the catalyst was characterized by SEM, BET, XRD, FT-IR, XPS and TGA, and its catalytic performance for the hydrolysis of cellulose was investigated in detail. The highest acidity of the catalyst was 3.79 mmol/g and the maximum glucose yield of 59.92% was achieved under optimized conditions. The catalyst also showed a promising reusability. The glucose yield was 53.01% after 5 cycles and as high as 55.92% when using the regenerated catalyst.

Valor nutricional do capim-elefante verde colhido em diferentes idades de rebrota / [Nutritional value of fresh elephantgrass harvested at different regrowth ages]

Avaliou-se o valor nutricional do capim-elefante verde colhido aos 56, 84 e 112 dias de idade, por meio do consumo e da digestibilidade em ovinos, da degradabilidade in situ e da cinética da fermentação ruminal. O capim-elefante colhido aos 56 dias proporcionou maiores valores de consumo da MS (1204,81g/dia), da EB (4910,41kcal/dia), da ED (3436,21kcal/dia) e da PB (130,90g/dia). Para o capim-elefante colhido aos 56 dias, ainda foram observados os maiores valores de digestibilidade da MS (70,64%), da EB (70,11%), da PB (68,96%), da FDN (71,4%) e do conteúdo ED (2,86Mcal/kg MS). Com o avanço da idade de corte, houve redução da degradabilidade potencial da MS (77,99% x 68,33%), da PB (84,80% x 56,52%) e da FDN (72,18% x 64,33%), para as idades de corte de 56 e 112 dias, respectivamente. O capim cortado aos 56 dias apresentou maior valor de produção cumulativa de gases (210,50mL/g de MS) e de degradabilidade da matéria seca (63,9%) após 96 horas de fermentação. O capim-elefante verde deve ser colhido aos 56 dias de rebrota em razão das características nutricionais apresentadas.(AU)

The nutritional value of fresh elephant grass harvested at 56, 84 and 112 days of age was evaluated by intake and digestibility in sheep, in situ degradability, and ruminal fermentation's kinetics. The elephant grass harvested at 56 days provided higher DM intake (1204.81g/day), GE (4910.41kcal/day), DE (3436.21kcal/day), and CP (130.90g/day) values. Furthermore, the highest DM (70.64%), GE (70.11%), DE (2.86%) and CP (68.96%) digestibility values were observed at 56 days. With the increase in the harvest age there was a reduction in the DM (77.99 x 68.33%), CP (84.80 x 56.52%) and NDF (72.18 x 64.33%) potential degradability in the treatments 56 and 112 days, respectively. Higher values of cumulative gas production (210,50mL/g DM) and DM degradability for elephant grass were observed at 56 days, after 96 hours of fermentation. The fresh elephant grass should be harvested at 56 days of regrowth due to the nutritional characteristics found in this study.(AU)

Determination of in vitro digestibility of forage species used in ruminant feeding.

Within the evaluation of the quality of forage resources, the main parameter that defines it is the digestibility of dry matter, which together with the amount of neutral and acidic detergent fibers and crude protein constitutes the basic information to assess forages which are supplied in the diet of the cattle. This research was carried out at the University of Los Llanos (Villavicencio, Colombia), and its objective was to determine the digestibility of three forages in cattle through three different in vitro techniques: inoculation with ruminal fluid and with feces and enzymatic digestibility technique, making the comparison with the in situ technique in order to validate the techniques and equipment that are being used for these procedures. The following species were evaluated: Pennisetum purpureum (PP), Tithonia diversifolia (TD), and Bauhinia variegata (BV), assessing the curve and rate of degradation of dry matter (DM), neutral detergent fiber (NDF), and total protein (TP) (0 to 72 h). A design of repeated measures was used, under which the analysis of variance was carried out to determine the ranges of deviation between the techniques and thus establish the trend of the data; the variables evaluated were the DM, NDF, and TP digestibilities of the three forages using the four techniques (three in vitro and one in situ). After verifying the differences between the variances of the digestibilities and checking the sphericity assumption with the Mauchly test, multiple comparisons were made with the Bonferroni test with a significance of 5%. The digestibility of DM, NDF, and TP varied between 38.62 and 44.22, 54.18 and 66.97, and 47.54 and 57.05%; 49.07 and 70.70, 72.52 and 75.44, and 62.61 and 74.02%; 29.93 and 34.84, 26.21 and 70.88, and 25.67 and 50.60% respectively in forages PP, TD, and BV, depending on the technique used for their estimation. Despite finding statistically significant differences between several of the comparisons made in the digestibility techniques, a high coefficient of determination and a high correlation between the in vitro estimations with respect to the in situ estimation were found; therefore, it is possible to use these techniques routinely thus avoiding the need to have cattle with fistulae to perform digestibility tests, with enzymatic digestibility technique being the most practical one.