Release of nanoparticle coatings additives from common surfaces via simulated dermal contact.

Both nanoparticles (NPs) and nano-enabled products have become widely available in consumer markets in the last decade. Surface coating including paints, stains, and sealants, have seen large increases in the inclusion of nanomaterials in their formulations to increase UV resistance, hydrophobicity, and scratch resistance. Currently, most literature studying the release of NPs and byproducts from coated surfaces has focused exclusively on lumber. In this study, well characterized CeO2 NPs were dispersed in either Milli-Q water, or a commercial paint primer and applied to several test surfaces including sanded plywood, drywall, low density polyethylene, acrylonitrile butadiene styrene, polycarbonate, textured polycarbonate with pebble finish, and glass. Coated surfaces were sampled using a method previously developed by U.S. Consumer Product Safety Commission staff to track the release of NPs via simulated dermal contact. Particular attention has been paid to the total amount, and morphology of material released. The total amount of cerium released from coated surfaces was found to be dependent on both the identity of the test surface, as well as the solution used for coating. Water-based application found 22-50 % of the applied cerium removed during testing, while primer-based application showed released rates ranging between 0.1 and 3 %. Finally, the SEM micrographs presented here suggest the release of microplastic particles during simulated dermal contact with plastic surfaces.

Zinc fever in a painter and varnisher: a case report.

BACKGROUND: Zinc fever is well described in medical literature, particularly in workers after handling zinc-containing materials at high temperatures e.g., in the welding of hot-dip galvanized steel sheets. It is not known whether zinc fever also occurs at low temperatures. CASE PRESENTATION: We present the case of a 33-year-old Caucasian atopic painter and varnisher with work-related dyspnea, sweating, as well as multiple occurrences of fever. He was sent to Institute for Prevention and Occupational medicine of the German Social Accident Insurance, Institute of the Ruhr-Universität Bochum (IPA) for the evaluation of isocyanate asthma, but an inhalative challenge with hexamethylene diisocyanate was negative. Since symptoms were closely related to the use of zinc coatings at room temperature without adequate protective measures, the diagnosis of zinc fever was made. After exposure cessation the worker immediately became symptom-free. The work as painter and varnisher may be associated with various exposures to hazardous substances. Besides solvents, epoxy compounds and isocyanates, which can cause obstructive respiratory diseases; additionally, zinc-containing agents should be considered as health hazards. CONCLUSIONS: This case demonstrates that zinc fever may occur also after application of zinc coatings by spray painting at low temperatures.

Palaeoproteomic identification of the original binder and modern contaminants in distemper paints from Uvdal stave church, Norway.

Two distemper paint samples taken from decorative boards in Uvdal stave church, Norway, were analysed using palaeoproteomics, with an aim of identifying their binder and possible contaminants. The results point at the use of calfskin to produce hide glue as the original paint binder, and are consistent with the instructions of binder production and resource allocation in the historical records of Norway. Although we did not observe any evidence of prior restoration treatments using protein-based materials, we found abundant traces of human saliva proteins, as well as a few oats and barley peptides, likely deposited together on the boards during their discovery in the 1970s. This work illustrates the need to fully consider contamination sources in palaeoproteomics and to inform those working with such objects about the potential for their contamination.

Marine eDNA sampling from submerged surfaces with paint rollers.

Environmental DNA (eDNA) analyses of species present in marine environments is the most effective biological diversity measurement tool currently available. eDNA sampling methods are an intrinsically important part of the eDNA biodiversity analysis process. Identification and development of eDNA sampling methods that are as rapid, affordable, versatile and practical as possible will improve rates of detection of marine species. Optimal outcomes of eDNA biodiversity surveys come from studies employing high levels of sampling replication, so any methods that make sampling faster and cheaper will improve scientific outcomes. eDNA sampling methods that can be applied more widely will also enable sampling from a greater range of marine surface micro-habitats, resulting in detection of a wider range of organisms. In this study, we compared diversity detection by several methods for sampling eDNA from submerged marine surfaces: polyurethane foam, nylon swabs, microfibre paint rollers, and sediment scoops. All of the methods produced a diverse range of species identifications, with >250 multicellular species represented by eDNA at the study site. We found that widely-available small paint rollers were an effective, readily available and affordable method for sampling eDNA from underwater marine surfaces. This approach enables the sampling of marine eDNA using extended poles, or potentially by remotely operated vehicles, where surface sampling by hand is impractical.

Black surfaces on ancient leather tefillin cases and straps from the Judean Desert: Macroscopic, microscopic and spectroscopic analyses.

Tefillin are Jewish ritual artifacts consisting of leather cases, containing inscribed slips, which are affixed with leather straps to the body of the tefillin practitioner. According to current Jewish ritual law, the tefillin cases and straps are to be colored black. The present study examines seventeen ancient tefillin cases discovered among the Dead Sea Scrolls in caves in the Judean Desert. All seventeen cases display grain surfaces with a very dark, nearly black appearance. We start with a hypothesis that the cases were intentionally colored black in antiquity using either a carbon-based or iron-gall-based paint or dye. The aim of this study is to test this hypothesis by subjecting these tefillin cases to a battery of examinations to assess the presence of carbon and iron used as pigments, and of organic materials which may have been used as binding agents in a paint. The tests deployed are: (1) macroscopic and microscopic analyses; (2) multispectral imaging using infrared wavelengths; (3) Raman spectroscopy; (4) Fourier transform infrared spectroscopy (FTIR); and (5) scanning electron microscope (SEM) and energy dispersive X-ray (EDX) spectroscopy. The results of these tests found no traces of carbon-based or iron-gall-based pigments, nor of organic compounds which may have served as binders in a paint. These results suggest that our posited hypothesis is unlikely. Instead, results of the SEM examination suggest it more likely that the black color on the surfaces of the tefillin cases is the result of natural degradation of the leather through gelatinization. The Judean Desert tefillin likely represent tefillin practices prior to when the rabbinic prescription on blackening tefillin was widely practiced. Our study suggests that the kind of non-blackened tefillin which the later rabbis rejected in their own times may well have been quite common in earlier times.

Metal record of copper-based antifouling paints in sediment core following marina construction and operation.

Marinas are central hubs of global maritime leisure and transport, yet their operations can deteriorate the environmental quality of sediments. In response, this study investigated the metal contamination history associated with antifouling paint uses in a sediment core collected from Bracuhy marina (Southeast Brazil). Analysis target major and trace elements (Cu, Zn, Pb, Cd and Sn), rare earth elements (REEs), and Pb isotopes. The modification in Pb isotopic ratios and REEs pattern unequivocally revealed sediment provenance disruption following the marina construction. Metal distribution in the sediment core demonstrates that concentrations of Cu and Zn increased by up to 15 and 5 times, respectively, compared to the local background. This severe Cu and Zn contamination coincides with the onset of marina operations and can be attributed to the use of antifouling paints.

Broad-Spectrum Supramolecularly Reloadable Antimicrobial Coatings.

Antimicrobial surfaces limit the spread of infectious diseases. To date, there is no antimicrobial coating that has widespread use because of short-lived and limited spectrum efficacy, poor resistance to organic material, and/or cost. Here, we present a paint based on waterborne latex particles that is supramolecularly associated with quaternary ammonium compounds (QACs). The optimal supramolecular pairing was first determined by immobilizing selected ions on self-assembled monolayers exposing different groups. The QAC surface loading density was then increased by using polymer brushes. These concepts were adopted to develop inexpensive paints to be applied on many different surfaces. The paint could be employed for healthcare and food production applications. Its slow release of QAC allows for long-lasting antimicrobial action, even in the presence of organic material. Its efficacy lasts for more than 90 washes, and importantly, once lost, it can readily be restored by spraying an aqueous solution of the QAC. We mainly tested cetyltrimethylammonium as QAC as it is already used in consumer care products. Our antimicrobial paint is broad spectrum as it showed excellent antimicrobial efficiency against four bacteria and four viruses.

Impacts of phosphorus amendments on legacy soil contamination from lead-based paint on a California, USA university campus.

Lead (Pb) is one of the most common heavy metal urban soil contaminants with well-known toxicity to humans. This incubation study (2-159 d) compared the ability of bone meal (BM), potassium hydrogen phosphate (KP), and triple superphosphate (TSP), at phosphorus:lead (P:Pb) molar ratios of 7.5:1, 15:1, and 22.5:1, to reduce bioaccessible Pb in soil contaminated by Pb-based paint relative to control soil to which no P amendment was added. Soil pH and Mehlich 3 bioaccessible Pb and P were measured as a function of incubation time and amount and type of P amendment. XAS assessed Pb speciation after 30 and 159 d of incubation. The greatest reductions in bioaccessible Pb at 159 d were measured for TSP at the 7.5:1 and 15:1 P:Pb molar ratios. The 7.5:1 KP treatment was the only other treatment with significant reductions in bioaccessible Pb compared to the control soil. It is unclear why greater reductions of bioaccessible Pb occurred with lower P additions, but it strongly suggests that the amount of P added was not a controlling factor in reducing bioaccessible Pb. This was further supported because Pb-phosphates were not detected in any samples using XAS. The most notable difference in the effect of TSP versus other amendments was the reduction in pH. However, the relationship between increasing TSP additions, resulting in decreasing pH and decreasing Pb bioaccessibility was not consistent. The 22.5:1 P:Pb TSP treatment had the lowest pH but did not significantly reduce bioaccessible Pb compared to the control soil. The 7.5:1 and 15:1 P:Pb TSP treatments significantly reduced bioaccessible Pb relative to the control and had significantly higher pH than the 22.5:1 P:Pb treatment. Clearly, impacts of P additions and soil pH on Pb bioaccessibility require further investigation to decipher mechanisms governing Pb speciation in Pb-based paint contaminated soils.

Health and Safety Education for Painting Workers in Small Companies to Make Them Aware That Paint Is "Dangerous and Harmful".

Workers in painting companies may be unaware that the paints they handle have adverse health effects. The present study explored the factors associated with workers' perception of paints as "dangerous and harmful". A questionnaire survey and interviews were conducted with workers engaged in painting operations in small-sized painting companies (fewer than 50 employees) in northern Kyushu and Yamaguchi prefectures. Safety and health education methods making workers perceive paint as "dangerous and harmful" were clarified. Fisher's exact test and logistic regression analysis were used for the survey and hierarchical cluster analysis for the interviews. The factor "Hazard prediction activity (KY Activity)", gender, and job position were identified as factors that make workers perceive paint as "dangerous and harmful". Based on the interview results, "KY Activity" was a keyword and a standardized safety and health activity. Before work, workers gather in a small group to discuss the dangers and hazards of paint, share information, establish action goals, and confirm safety measures. The questionnaire identified "KY Activity" as a factor influencing the workers' perception of paint as "dangerous and harmful". "KY Activity," also extracted from the interviews, is an effective health and safety education method for teaching workers in small-sized painting companies that paint is "dangerous and harmful".

Ozone Loss on Painted Surfaces: Dependence on Relative Humidity, Aging, and Exposure to Reactive SVOCs.

Ozone and its oxidation products result in negative health effects when inhaled. Despite painted surfaces being the most abundant surface in indoor spaces, surface loss remains one of the largest uncertainties in the indoor ozone budget. Here, ozone uptake coefficients (γO3) on painted surfaces were measured in a flow-through reactor where 79% of the inner surfaces were removable painted glass sheets. Flat white paint initially had a high uptake coefficient (8.3 × 10-6) at 20% RH which plateaued to 1.1 × 10-6 as the paint aged in an indoor office over weeks. Increasing the RH from 0 to 75% increased γO3 by a factor of 3.0, and exposure to 134 ppb of α-terpineol for 1 h increased γO3 by a factor of 1.6 at 20% RH. RH also increases α-terpineol partitioning to paint, further increasing ozone loss, but the type of paint (flat, eggshell, satin, semigloss) had no significant effect. A kinetic multilayer model captures the dependence of γO3 on RH and the presence of α-terpineol, indicating the reacto-diffusive depth for O3 is 1 to 2 µm. Given the similarity of the kinetics on aged surfaces across many paint types and the sustained reactivity during aging, these results suggest a mechanism for catalytic loss.

A novel procedure for the quantification of antifungal activity against filamentous fungi, mycelial invasion distance (MID) method.

A novel method for the quantification of antifungal activity of fungicides and painted surfaces, mycelial invasion distance (MID) method, was developed and applied to the quantification of activities of parabens and an antifungal paint. In this method, the MID of aerial mycelia on a test paper or a panel placed on a nutrient agar plate was measured with a stereoscopic microscope and a micro-ruler. The antifungal activities of the parabens and painted surfaces were expressed as the MID. The higher the hydrophobicity of parabens, the longer the MID, that is the lower the antifungal activity, were observed. Conversely, relatively polar parabens, such as methyl and ethyl parabens, exhibited stronger antifungal activity, that is shorter MID. The most hydrophobic paraben, benzyl paraben, showed the weakest antifungal activity. Furthermore, it was confirmed that the MID method was effective for the evaluation of the painted surfaces.

Graphene nanosheet reinforcement of polyurethane nanocomposite for green and sustainable photoluminescence, superhydrophobic, and anticorrosive paint.

A simple and environmentally friendly method was developed for smart and efficient waterborne polyurethane (PUR) paint. Sugarcane bagasse was recycled into reduced graphene oxide nanosheets (rGONSs). Both lanthanide-doped aluminate nanoparticles (LAN; photoluminescent agent, 7-9 nm) and rGONSs (reinforcement agent) were integrated into a waterborne polyurethane to produce a novel photoluminescent, hydrophobic, and anticorrosive nanocomposite coating. Using ferrocene-based oxidation under masked circumstances, graphene oxide nanosheets were produced from sugarcane bagasse. The oxidized semicarbazide (SCB) nanostructures were integrated into polyurethane coatings as a drying, anticorrosion, and crosslinking agent. Polyurethane coatings with varying amounts of phosphor pigment were prepared and subsequently applied to mild steel. The produced paints (LAN/rGONSs@PUR) were tested for their hydrophobicity, hardness, and scratch resistance. Commission Internationale de l'éclairage (CIE) Laboratory parameters and photoluminescence analysis established the opacity and colourimetric properties of the nanocomposite coatings. When excited at 365 nm, the luminescent transparent paints emitted a strong greenish light at 517 nm. The anticorrosion characteristics of the coated steel were investigated. The phosphor-containing (11% w/w) polyurethane coatings displayed the most pronounced anticorrosion capability and long-persistent luminosity. The prepared waterborne polyurethane paints were very photostable and durable.

Validation of a low-cost lead hazard screening kit for the home environment.

The main sources of lead exposure for children occur in the home environment, yet no low-cost analytical methods exist to screen homes for lead hazards. Previously, an inexpensive (~$20), quantitative lead screening kit was developed in which residents collect soil, paint, and dust samples that are returned to a laboratory for lead analysis using X-ray fluorescence spectroscopy (XRF). This screening kit was initially validated in 2020; it was determined that in situ and ex situ XRF lead measurements on the same samples exhibited strong sensitivity, specificity, and accuracy. As a follow-up to the initial validation, an implementation study and further statistical analyses were conducted. Correlation analysis using the results from nearly 400 screening kits identified an overall lack of correlation between sample types, reinforcing the utility of all eight sample locations. Principal component analysis searched for underlying correlations in sample types and provided evidence that both interior and exterior paint are major sources of lead hazards for Indiana homes. The implementation study compared the results of the government-standard lead inspection and risk assessment (LIRA) and the lead screening kit in 107 Indiana homes. In the United States, the LIRA is a thorough inspection of paint, dust, and soil that is usually state mandated in response to a child's elevated blood level and is used to identify where remediation efforts should be focused. The lead screening kit and LIRA agreed on the presence of lead in 79 of the 107 homes tested (74%). Discrepancies in agreement are likely the result of differences in the sample location and number of samples collected by each method. Overall, these results suggest that the lead screening kit is an acceptable resource that could be used to expand the services health departments provide for lead prevention. Integr Environ Assess Manag 2024;20:1504-1513. © 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Contact sensitization and self-reported eczema in Swedish painters with occupational exposure to isothiazolinones.

BACKGROUND: Due to an increasing occupational usage of isothiazolinone (IT)-containing preservatives, and their potential to cause skin sensitization and allergic contact dermatitis, that is, chronic disease, there is a need for more knowledge on how highly exposed workers are affected. OBJECTIVES: The overall objective was to explore dermatological symptoms of potentially long-lasting or chronic character in Swedish painters. METHODS: Building painters from western and southern Sweden were initially invited to perform a questionnaire on occurrence of skin symptoms. Participants with affirmative responses, and the right inclusion criteria, were further invited to patch testing with four different ITs: benzisothiazolinone (BIT), methylisothiazolinone, methylchloroisothiazolinone and octylisothiazolinone. RESULTS: There was a tendency towards higher occurrence of positive patch test reactions among the painters compared with occupationally unexposed registry patients; however, not statistically significant differences. BIT was the substance most frequently causing positive test results in both groups. The occurrence of adult-onset eczema was higher in painters than in the control group of electricians, and just shy of statistical significance concerning any of several skin locations (face/legs/arms/hands). CONCLUSION: Building painters present with positive patch test reactions to common paint preservatives (ITs), and they report adult-onset eczema more often than do less occupationally exposed groups.

New insight from MALDI-TOF MS and multivariate data analysis on the botanical origin of polysaccharide-based paint binders in ancient Egypt.

Polysaccharide-based materials of plant origin are known to have been used as binding media in paint and ground layers of artifacts from ancient Egypt, including wall paintings, cartonnages and sarcophagi. The use of gums from Acacia, Astragalus and Prunus genera has been suggested in the literature on the basis of their qualitative or quantitative monosaccharide profile after complete chemical hydrolysis. The introduction of partial enzymatic digestion of the polysaccharide material, followed by analysis of the released oligosaccharides by matrix assisted laser desorption ionization-time-of-flight mass spectrometry, has proved effective in discriminating among gums from different genera, as well as among species within the Acacia genus. In this study, the previously built Acacia database was expanded, principal component analysis (PCA) was used to aid in grouping of the samples, and data interpretation was refined following a modified acacieae taxonomy. Application of the analytical strategy to investigate the paint binders in artworks from ancient Egypt allowed qualitative discrimination of gums at a species level, and provided new insights into the artists' material choices.

Microplastic-antifouling paint particle contamination alters microbial communities in surrounding marine sediment.

Paint used to coat surfaces in aquatic environments often contain biocides to prevent biofouling, and as these coatings degrade, antifouling paint particles (APPs) end up in aquatic, and especially marine, sediments. However, it is currently unclear what further influence APPs in the sediment have on biotic communities or processes. This study investigates how a variety of commercially-available APPs effect the marine microbial community by spiking different laboratory-manufactured APPs to sediment. Following exposure for 30 and 60 days, APPs caused a clear and consistent effect on the bacterial community composition as determined by 16S metabarcoding. This effect was strongest between 0 and 30 days, but continues to a lesser extent between 30 and 60 days. APPs appear to inhibit the highly diverse, but in general rarer, fraction of the community and/or select for specific community members to become more dominant. 71 antifouling-presence and 454 antifouling-absence indicator taxa were identified by indicator analysis. The difference in the level of classification in these two indicator groups was highly significant, with the antifouling-presence indicators having much higher percentage sequence identity to cultured taxa, while the antifouling-absence indicators appear to be made up of undescribed taxa, which may indicate that APPs act as a proxy for general anthropogenic influence or that APP contamination selects for taxa capable of being cultured. Given the clear and consistent effect APPs have on the surrounding sediment microbial community, further research into how APPs affect sediment functional processes and how such effects scale with concentration is recommended to better assess the wider consequences of these pollutants for marine biogeochemical cycles in the future. SYNOPSIS: Microplastic-paint particles are commonly found in marine sediment but little is known about how these, especially antifouling, paint particles affect sediment microbial communities. This study demonstrates that antifouling paint particles fundamentally alter sediment microbial communities.

United States house dust Pb concentrations are influenced by soil, paint, and house age: insights from a national survey.

BACKGROUND: Lead (Pb) in house dust contributes significantly to blood lead levels (BLLs) in children which may result in dire health consequences. Assessment of house dust Pb in the United States, relationships with Pb in soil and paint, and residential factors influencing Pb concentrations are essential to probing drivers of house dust Pb exposure. OBJECTIVE: Pb concentrations in vacuum-collected house dust are characterized across 346 homes participating in the American Health Homes Survey II (AHHS II), a US survey (2018-2019) evaluating residential Pb hazards. Connections between house dust Pb and soil Pb, paint Pb, and other residential factors are evaluated, and dust Pb concentration data are compared to paired loading data to understand Pb hazard standard implications. RESULTS: Mean and median vacuum dust Pb concentrations were 124 µg Pb g-1 and 34 µg Pb g-1, respectively. Vacuum-collected dust concentrations and dust wipe Pb loading rates were significantly correlated within homes (α < 0.001; r ≥ 0.4). At least one wipe sample exceeded current house dust Pb loading hazard standards (10 µg ft-2 or 100 µg Pb ft-2 for floors and windowsills, respectively) in 75 of 346 homes (22%). House dust Pb concentrations were correlated with soil Pb (r = 0.64) and Pb paint (r = 0.57). Soil Pb and paint Pb were also correlated (r = 0.6). IMPACT: The AHHS II provides a window into the current state of Pb in and around residences. We evaluated the relationship between house dust Pb concentrations and two common residential Pb sources: soil and Pb-based paint. Here, we identify relationships between Pb concentrations from vacuum-collected dust and paired Pb wipe loading data, enabling dust Pb concentrations to be evaluated in the context of hazard standards. This relationship, along with direct ties to Pb in soil and interior/exterior paint, provides a comprehensive assessment of dust Pb for US homes, crucial for formulating effective strategies to mitigate Pb exposure risks in households.

Management of water-based paint sludge originating from the automotive industry via composting.

Water-based paint sludge generated from the automotive industry is considered a hazardous waste due to its high carbon content and is challenging and costly to manage. This study investigates the management of water-based paint sludge through the composting process, considering its high carbon content. The water-based paint sludge was composted in five separate reactors with the addition of treatment sludge from the same industry as co-substrate and inoculum, as well as sunflower stalks as a bulking agent. The ratio of paint sludge added to the compost mixtures varied between 40% and 80%. The highest temperature was achieved in reactors where industrial sludge was added, and the bulking agent was used at a rate of 20% (R3 and R5). The most efficient composting process was conducted with the addition of 60% water-based paint sludge, 20% treatment sludge, and 20% sunflower stalks (w/w, wet weight basis) (R3). During this process, reductions in organic matter content were observed due to organic matter mineralization, resulting in a decrease in moisture during the maturation phase and consequently reducing waste volumes. The composting process can be a useful tool in addressing the challenges of paint sludge management. Utilizing the composting process not only reduces waste volumes, thereby minimizing environmental impacts, but also offers a sustainable approach to paint sludge management by lowering disposal costs. It is also possible to achieve more effective results by composting paint sludge with different recipes and the use of various bulking agents.Implications: Composting is a method that can be used to achieve stabilization, reduce the quantity, and enable biodrying of water-based paint sludge generated from the automotive industry. In this study, different ratios of paint sludge were mixed with treatment sludge from the same industry as co-substrate and inoculum, while sunflower stalks were added as a bulking agent, and a composting process was conducted. The addition of industrial wastewater treatment sludge and sunflower stalks has increased the efficiency of the paint sludge composting process. In the management of paint sludge, the composting process has emerged as a significant alternative that reduces disposal costs and environmental impacts.