A novel procedure for the quantification of antifungal activity against filamentous fungi, mycelial invasion distance (MID) method.

A novel method for the quantification of antifungal activity of fungicides and painted surfaces, mycelial invasion distance (MID) method, was developed and applied to the quantification of activities of parabens and an antifungal paint. In this method, the MID of aerial mycelia on a test paper or a panel placed on a nutrient agar plate was measured with a stereoscopic microscope and a micro-ruler. The antifungal activities of the parabens and painted surfaces were expressed as the MID. The higher the hydrophobicity of parabens, the longer the MID, that is the lower the antifungal activity, were observed. Conversely, relatively polar parabens, such as methyl and ethyl parabens, exhibited stronger antifungal activity, that is shorter MID. The most hydrophobic paraben, benzyl paraben, showed the weakest antifungal activity. Furthermore, it was confirmed that the MID method was effective for the evaluation of the painted surfaces.

Controlling microbial activity on walls by a photocatalytic nanocomposite paint: A field study.

BACKGROUND: Bacteria and fungi that grow on the walls can cause allergic reactions and infectious diseases in human. We proposed a low-cost and easy-to-operate testing protocol for large scale field studies to evaluate the long-term antimicrobial performance of a novel WOx paint in 2 primary schools. METHODS: In Tun Mun and Tin Shui Wai schools, WOx paints were painted on semi-outdoor and indoor walls and daily chlorine disinfection was applied after class in TSW School. A guidance was proposed for the protocol using the ATP biofluorescence method for large-scale field studies. ATP swab samples were taken at locations with and without the WOx paint on a control basis with a sampling frequency once a week for three months. The ATP values were then processed and presented in box plots. RESULTS: In both schools, the median log-scale ATP values of walls with WOx paint were at least 0.5-log lower than those without WOx paint. The WOx paint also performed better than daily chlorine disinfection in reducing microbial activities in long-term. CONCLUSIONS: The proposed testing protocol is suitable to evaluate long-term performance of an antimicrobial paint by analyzing its microbial activity in large-scale field tests. The WOx paint shows long-term effectiveness in reducing microbial activities on wall surfaces in both indoor and semi-outdoor environments.

Detection of potential biodeterioration risks for tempera painting in 16th century exhibits from State Tretyakov Gallery.

In this study, we investigated biodeterioration of materials used in tempera painting by analyzing the structure of the microbiome in ancient tempera paintings exhibited in State Tretyakov Gallery, Moscow, Russia. Samples were obtained from 16th-century paintings, including a grand Russian Orthodox icon "The Church Militant" (all exhibits were without visible signs of biodeterioration), and from surrounding walls and ceilings (with vast zones of visible microbial growth). A number of microorganisms isolated from visible signs of environmental bio-damage were also detected in tempera paintings kept in temperature- and humidity-controlled conditions unfavorable for the growth of microflora. To determine the biodegrading potential of the microbiome for tempera paintings, we developed a set of mock layers from paintwork materials used in tempera painting of 16th century and their modern analogues and inoculated them with cultures containing filamentous fungi and bacteria. The susceptibility to microbial degradation of individual tempera painting materials was examined by micro-Fourier Transform Infrared (FTIR) spectroscopy, which enabled detection of even invisible signs of biodeterioration. The results indicate that the microorganisms isolated from paintings and surrounding areas in the museum are capable of causing significant damage of various tempera materials, among which varnishes were the most resistant; however, the addition of antiseptic (sodium pentachlorophenolate) can inhibit microbial growth on sturgeon glue.

Hunter-Gatherers Harvested and Heated Microbial Biogenic Iron Oxides to Produce Rock Art Pigment.

Red mineral pigment use is recognized as a fundamental component of a series of traits associated with human evolutionary development, social interaction, and behavioral complexity. Iron-enriched mineral deposits have been collected and prepared as pigment for use in rock art, personal adornment, and mortuary practices for millennia, yet little is known about early developments in mineral processing techniques in North America. Microanalysis of rock art pigments from the North American Pacific Northwest reveals a sophisticated use of iron oxide produced by the biomineralizing bacterium Leptothrix ochracea; a keystone species of chemolithotroph recognized in recent advances in the development of thermostable, colorfast biomaterial pigments. Here we show evidence for human engagement with this bacterium, including nanostructural and magnetic properties evident of thermal enhancement, indicating that controlled use of pyrotechnology was a key feature of how biogenic iron oxides were prepared into paint. Our results demonstrate that hunter-gatherers in this area of study prepared pigments by harvesting aquatic microbial iron mats dominated by iron-oxidizing bacteria, which were subsequently heated in large open hearths at a controlled range of 750 °C to 850 °C. This technical gesture was performed to enhance color properties, and increase colorfastness and resistance to degradation. This skilled production of highly thermostable and long-lasting rock art paint represents a specialized technological innovation. Our results contribute to a growing body of knowledge on historical-ecological resource use practices in the Pacific Northwest during the Late Holocene.Figshare link to figures: https://figshare.com/s/9392a0081632c20e9484.

Paint particles are a distinct and variable substrate for marine bacteria.

While paint particles are an important part of the microplastic sphere, they have, as yet, received much less research coverage, particularly regarding microplastic-microbiological interactions. This study investigated the biofilm communities of a variety of paint particles from brackish sediment using 16S rRNA gene sequencing. Paint particle biofilm communities appear to be distinct from natural (water and sediment), non-synthetic particle (cellulose) and common microplastic biofilm communities. Notably, there appears to be 1 group of sulphate-reducing bacteria from the Desulfobacteraceae family, Desulfatitalea tepidiphilia, that dominate certain paint biofilms. Of the 8 investigated paint-associated communities, four paints displayed this high Desulfobacteraceae presence. However, it is currently unclear from the chemical analysis performed of the paint surface chemistry (ATR FT-IR spectroscopy, Raman spectroscopy, SEM-EDX) what the drivers behind this might be. As such, this study provides important insights as the first to analyse microplastic-paint biofilm communities and paves the way for future research.

Impacts of indoor surface finishes on bacterial viability.

Microbes in indoor environments are constantly being exposed to antimicrobial surface finishes. Many are rendered non-viable after spending extended periods of time under low-moisture, low-nutrient surface conditions, regardless of whether those surfaces have been amended with antimicrobial chemicals. However, some microorganisms remain viable even after prolonged exposure to these hostile conditions. Work with specific model pathogens makes it difficult to draw general conclusions about how chemical and physical properties of surfaces affect microbes. Here, we explore the survival of a synthetic community of non-model microorganisms isolated from built environments following exposure to three chemically and physically distinct surface finishes. Our findings demonstrated the differences in bacterial survival associated with three chemically and physically distinct materials. Alkaline clay surfaces select for an alkaliphilic bacterium, Kocuria rosea, whereas acidic mold-resistant paint favors Bacillus timonensis, a Gram-negative spore-forming bacterium that also survives on antimicrobial surfaces after 24 hours of exposure. Additionally, antibiotic-resistant Pantoea allii did not exhibit prolonged retention on antimicrobial surfaces. Our controlled microcosm experiment integrates measurement of indoor chemistry and microbiology to elucidate the complex biochemical interactions that influence the indoor microbiome.

Bacterial and fungal biodeterioration of discolored building paints in Lagos, Nigeria.

Microbial induced discolorations are an unsightly feature occurring on painted walls in Lagos, the commercial hub of Nigeria. Very few studies have been carried out conventionally about the microbial community structure of discolored painted walls in Nigeria therefore, knowledge of the true microbial diversity is elusive. To further our understanding of the phylogenetic diversity of representative microbial community on 40 discolored and three clean-looking buildings, a comparative DNA sequence analysis of 16S rDNA genes was undertaken. Following DNA extraction, portions of the rDNA genes were amplified by PCR and sequenced. Resulting sequences were compared with GenBank data base sequences. Fifteen unique fungal sequences and one bacterial sequence were obtained. Majority (37.50%) of rDNA sequences analyzed, represent the genus Meyerozyma of which the novel fungus Meyerozyma guilliermondii, which to our knowledge, has not yet been implicated in painted walls was detected. Clones from the discolored painted wall isolates also produced a data set in which 31.25% of sequences were related to Fusarium proliferatum and 6.25% were Pseudomonas aeruginosa. The remaining sequences clustered with members of the genera Candida (6.25%), Aspergillus (12.5%) and Cerrena (6.25%). The study provides reliable data on microbial communities on painted walls and information for paint biocide formulation.

Biodeterioration of Pompeian mural paintings: fungal colonization favoured by the presence of volcanic material residues.

This work was focused on the study of the biodegradation processes jeopardizing a mural painting conserved in the basement of Ariadne House (archaeological site of Pompeii, Italy). The fresco stood out for its peculiar state of preservation: the upper part, recovered in 1988, was just barely colonized by microorganisms. On the contrary, the lower part (excavated in 2005) was almost completely covered by extensive biological patinas. The genomic characterization carried out by polymerase chain reaction (PCR) highlighted the presence of seven different fungi strains on the mural surface. Beside, in situ and laboratory analyses were performed with the purpose of identifying the causes of the heterogeneous spatial distribution of the biopatinas. The in situ Raman spectroscopy and energy dispersive X-ray fluorescence (ED-XRF) spectroscopy measurements excluded any link between the heterogeneous colonization and the original materials present in the wall. On the other side, X-ray diffraction (XRD) and scanning electron microscopy (SEM) on microsamples proved the presence of a thin volcanic material layer overlying the lower part of the fresco. Considering that most of the biofilms of the studied mural painting only growth over these residues, it was confirmed the role of volcanic material as a suitable support for biological colonization. Thanks to the obtained results, this research helped to understand more in depth an important degradation pathway threatening the artworks from one of the most important archaeological sites in the world.

Effective Control of Molds Using a Combination of Nanoparticles.

Molds are filamentous fungi able to grow on a variety of surfaces, including constructed surfaces, food, rotten organic matter, and humid places. Mold growth is characterized by having an unpleasant odor in enclosed or non-ventilated places and a non-aesthetic appearance. They represent a health concern because of their ability to produce and release mycotoxins, compounds that are toxic to animals and humans. The aim of this study was to evaluate commercial nanoparticles (NPs) that can be used as an additive in coatings and paints to effectively control the growth of harmful molds. Four different NPs were screened for their antifungal activities against the mycotoxin producing mold strains Aspergillus flavus and A. fumigatus. The minimal inhibitory concentrations of the NPs were determined in broth media, whereas an agar diffusion test was used to assess the antimold activity on acrylic- and water-based paints. The cytotoxic activity and the inflammatory response of the NPs were also evaluated using the established human derived macrophage cell line THP-1. Results showed that a combination of mix metallic- and ZnO-NPs (50:10 µg/mL) effectively inhibited the fungal growth when exposed to fluorescent light. Neither cytotoxic effect nor inflammatory responses were recorded, suggesting that this combination can be safely used in humid or non-ventilated environments without any health concerns.

Investigation of the microbial communities colonizing prepainted steel used for roofing and walling.

Microbial colonization of prepainted steel, commonly used in roofing applications, impacts their aesthetics, durability, and functionality. Understanding the relevant organisms and the mechanisms by which colonization occurs would provide valuable information that can be subsequently used to design fouling prevention strategies. Here, next-generation sequencing and microbial community finger printing (T-RFLP) were used to study the community composition of microbes colonizing prepainted steel roofing materials at Burrawang, Australia and Kapar, Malaysia over a 52-week period. Community diversity was low and was dominated by Bacillus spp., cyanobacteria, actinobacteria, Cladosporium sp., Epicoccum nigrum, and Teratosphaeriaceae sp. Cultivation-based methods isolated approximately 20 different fungi and bacteria, some of which, such as E. nigrum and Cladosporium sp., were represented in the community sequence data. Fluorescence in situ hybridization imaging showed that fungi were the most dominant organisms present. Analysis of the sequence and T-RFLP data indicated that the microbial communities differed significantly between locations and changed significantly over time. The study demonstrates the utility of molecular ecology tools to identify and characterize microbial communities associated with the fouling of painted steel surfaces and ultimately can enable the targeted development of control strategies based on the dominant species responsible for fouling.

Biodegradative Activities of Selected Environmental Fungi on a Polyester Polyurethane Varnish and Polyether Polyurethane Foams.

UNLABELLED: Polyurethane (PU) is widely used in many aspects of modern life because of its versatility and resistance. However, PU waste disposal generates large problems, since it is slowly degraded, there are limited recycling processes, and its destruction may generate toxic compounds. In this work, we isolated fungal strains able to grow in mineral medium with a polyester PU (PS-PU; Impranil DLN) or a polyether PU (PE-PU; Poly Lack) varnish as the only carbon source. Of the eight best Impranil-degrading strains, the six best degraders belonged to the Cladosporium cladosporioides complex, including the species C. pseudocladosporioides, C. tenuissimum, C. asperulatum, and C. montecillanum, and the two others were identified as Aspergillus fumigatus and Penicillium chrysogenum The best Impranil degrader, C. pseudocladosporioides strain T1.PL.1, degraded up to 87% after 14 days of incubation. Fourier transform infrared (FTIR) spectroscopy analysis of Impranil degradation by this strain showed a loss of carbonyl groups (1,729 cm(-1)) and N-H bonds (1,540 and 1,261 cm(-1)), and gas chromatography-mass spectrometry (GC-MS) analysis showed a decrease in ester compounds and increase in alcohols and hexane diisocyanate, indicating the hydrolysis of ester and urethane bonds. Extracellular esterase and low urease, but not protease activities were detected at 7 and 14 days of culture in Impranil. The best eight Impranil-degrading fungi were also able to degrade solid foams of the highly recalcitrant PE-PU type to different extents, with the highest levels generating up to 65% of dry-weight losses not previously reported. Scanning electron microscopy (SEM) analysis of fungus-treated foams showed melted and thinner cell wall structures than the non-fungus-treated ones, demonstrating fungal biodegradative action on PE-PU. IMPORTANCE: Polyurethane waste disposal has become a serious problem. In this work, fungal strains able to efficiently degrade different types of polyurethanes are reported, and their biodegradative activity was studied by different experimental approaches. Varnish biodegradation analyses showed that fungi were able to break down the polymer in some of their precursors, offering the possibility that they may be recovered and used for new polyurethane synthesis. Also, the levels of degradation of solid polyether polyurethane foams reported in this work have never been observed previously. Isolation of efficient polyurethane-degrading microorganisms and delving into the mechanisms they used to degrade the polymer provide the basis for the development of biotechnological processes for polyurethane biodegradation and recycling.

Broad spectrum antibacterial and antifungal polymeric paint materials: synthesis, structure-activity relationship, and membrane-active mode of action.

Microbial attachment and subsequent colonization onto surfaces lead to the spread of deadly community-acquired and hospital-acquired (nosocomial) infections. Noncovalent immobilization of water insoluble and organo-soluble cationic polymers onto a surface is a facile approach to prevent microbial contamination. In the present study, we described the synthesis of water insoluble and organo-soluble polymeric materials and demonstrated their structure-activity relationship against various human pathogenic bacteria including drug-resistant strains such as methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), and beta lactam-resistant Klebsiella pneumoniae as well as pathogenic fungi such as Candida spp. and Cryptococcus spp. The polymer coated surfaces completely inactivated both bacteria and fungi upon contact (5 log reduction with respect to control). Linear polymers were more active and found to have a higher killing rate than the branched polymers. The polymer coated surfaces also exhibited significant activity in various complex mammalian fluids such as serum, plasma, and blood and showed negligible hemolysis at an amount much higher than minimum inhibitory amounts (MIAs). These polymers were found to have excellent compatibility with other medically relevant polymers (polylactic acid, PLA) and commercial paint. The cationic hydrophobic polymer coatings disrupted the lipid membrane of both bacteria and fungi and thus showed a membrane-active mode of action. Further, bacteria did not develop resistance against these membrane-active polymers in sharp contrast to conventional antibiotics and lipopeptides, thus the polymers hold great promise to be used as coating materials for developing permanent antimicrobial paint.

Halophilic microorganisms are responsible for the rosy discolouration of saline environments in three historical buildings with mural paintings.

A number of mural paintings and building materials from monuments located in central and south Europe are characterized by the presence of an intriguing rosy discolouration phenomenon. Although some similarities were observed among the bacterial and archaeal microbiota detected in these monuments, their origin and nature is still unknown. In order to get a complete overview of this biodeterioration process, we investigated the microbial communities in saline environments causing the rosy discolouration of mural paintings in three Austrian historical buildings using a combination of culture-dependent and -independent techniques as well as microscopic techniques. The bacterial communities were dominated by halophilic members of Actinobacteria, mainly of the genus Rubrobacter. Representatives of the Archaea were also detected with the predominating genera Halobacterium, Halococcus and Halalkalicoccus. Furthermore, halophilic bacterial strains, mainly of the phylum Firmicutes, could be retrieved from two monuments using special culture media. Inoculation of building materials (limestone and gypsum plaster) with selected isolates reproduced the unaesthetic rosy effect and biodeterioration in the laboratory.

Survival with 98% methemoglobin levels in a school-aged child during the "festival of colors".

Methemoglobin levels more than 70% have almost always been reported to have been fatal. The case of a 4-year-old boy who survived with methemoglobin levels of 98% is presented here. He was brought to the emergency department with complaints of vomiting, pain abdomen, and altered sensorium following accidental ingestion of paint thinner mixed with "Holi" colors. On examination, the child was in altered sensorium, cyanosed with saturations of 55%, who did not respond despite positive pressure ventilation with 100% oxygen. A possibility of toxic methemoglobinemia was considered and confirmed by finding of elevated methemoglobin levels of 98%. The child survived with definitive therapy with methylene blue and aggressive goal-directed approach.

Pseudoalteromonas spp. serve as initial bacterial attractants in mesocosms of coastal waters but have subsequent antifouling capacity in mesocosms and when embedded in paint.

The purpose of the present study was to determine if the monoculture antifouling effect of several pigmented pseudoalteromonads was retained in in vitro mesocosm systems using natural coastal seawater and when the bacteria were embedded in paint used on surfaces submerged in coastal waters. Pseudoalteromonas piscicida survived on a steel surface and retained antifouling activity for at least 53 days in sterile seawater, whereas P. tunicata survived and had antifouling activity for only 1 week. However, during the first week, all Pseudoalteromonas strains facilitated rather than prevented bacterial attachment when used to coat stainless steel surfaces and submerged in mesocosms with natural seawater. The bacterial density on surfaces coated with sterile growth medium was 10(5) cells/cm(2) after 7 days, whereas counts on surfaces precoated with Pseudoalteromonas were significantly higher, at 10(6) to 10(8) cells/cm(2). However, after 53 days, seven of eight Pseudoalteromonas strains had reduced total bacterial adhesion compared to the control. P. piscicida, P. antarctica, and P. ulvae remained on the surface, at levels similar to those in the initial coating, whereas P. tunicata could not be detected. Larger fouling organisms were observed on all plates precoated with Pseudoalteromonas; however, plates coated only with sterile growth medium were dominated by a bacterial biofilm. Suspensions of a P. piscicida strain and a P. tunicata strain were incorporated into ship paints (Hempasil x3 87500 and Hempasil 77500) used on plates that were placed at the Hempel A/S test site in Jyllinge Harbor. For the first 4 months, no differences were observed between control plates and treated plates, but after 5 to 6 months, the control plates were more fouled than the plates with pseudoalteromonad-based paint. Our study demonstrates that no single laboratory assay can predict antifouling effects and that a combination of laboratory and real-life methods must be used to determine the potential antifouling capability of new agents or organisms.

The impact of culture medium on the development and physiology of biofilms of Pseudomonas fluorescens formed on polyurethane paint.

Microbial biofilms cause the deterioration of polymeric coatings such as polyurethanes (PUs). In many cases, microbes have been shown to use the PU as a nutrient source. The interaction between biofilms and nutritive substrata is complex, since both the medium and the substratum can provide nutrients that affect biofilm formation and biodeterioration. Historically, studies of PU biodeterioration have monitored the planktonic cells in the medium surrounding the material, not the biofilm. This study monitored planktonic and biofilm cell counts, and biofilm morphology, in long-term growth experiments conducted with Pseudomonas fluorescens under different nutrient conditions. Nutrients affected planktonic and biofilm cell numbers differently, and neither was representative of the system as a whole. Microscopic examination of the biofilm revealed the presence of intracellular storage granules in biofilms grown in M9 but not yeast extract salts medium. These granules are indicative of nutrient limitation and/or entry into stationary phase, which may impact the biodegradative capability of the biofilm.

The effect of surface colour on the formation of marine micro and macrofouling communities.

The effect of substratum colour on the formation of micro- and macro fouling communities was investigated. Acrylic tiles, painted either black or white were covered with transparent sheets in order to ensure similar surface properties. All substrata were exposed to biofouling at 1 m depth for 40 d in the Marina Bandar al Rowdha (Muscat, Sea of Oman). Studies were conducted in 2010 over a time course of 5, 10 and 20 d, and in 2012 samples were collected at 7, 14 and 21 d. The densities of bacteria on the black and white substrata were similar with the exception of day 10, when the black substrata had a higher abundance than white ones. Pyrosequencing via 454 of 16S rRNA genes of bacteria from white and black substrata revealed that Alphaproteobacteria and Firmicutes were the dominant groups. SIMPER analysis demonstrated that bacterial phylotypes (uncultured Gammaproteobacteria, Actibacter, Gaetbulicola, Thalassobius and Silicibacter) and the diatoms (Navicula directa, Navicula sp. and Nitzschia sp.) contributed to the dissimilarities between communities developed on white and black substrata. At day 20, the highest amount of chlorophyll a was recorded in biofilms developed on black substrata. SIMPER analysis showed that Folliculina sp., Ulva sp. and Balanus amphitrite were the major macro fouling species that contributed to the dissimilarities between the communities formed on white and black substrata. Higher densities of these species were observed on black tiles. The results emphasise the effect of substratum colour on the formation of micro and macro fouling communities; substratum colour should to be taken into account in future studies.

Characterization of Streptomyces isolates causing colour changes of mural paintings in ancient Egyptian tombs.

Paintings in ancient Egyptian tombs often suffer colour changes due to microbial growth and colonization. Streptomyces strains were isolated from mural paintings of Tell Basta and Tanis tombs (East of Nile Delta, Egypt) and were identified using biochemical and molecular methods. The16S rDNA sequences data indicated that isolated strains were closely related to S. coelicolor, S. albidofuscus, S. ambofaciens, S. canarius, S. parvullus, S. corchorusii, S. albidofuscus and S. nigrifaciens. It could be shown that Streptomyces strains are involved on a large scale in the colour changes of paintings and stone support by producing a wide range of metabolites such as acids (oxalic, citric and sulphuric acids), biopigments of melanin, carotenoids, and hydrogen sulphide.

Is nanotechnology revolutionizing the paint and lacquer industry? A critical opinion.

Many paints for indoor and outdoor applications contain biocides and additives for protection against microbial, physical and chemical deterioration. The biocides should remain active as long as they are incorporated in the paint. Protection against microbial colonization should last at least a decade. Once the biocides are released they should degrade within a short time so that no accumulation in the environment can occur. The paint industry is not only focusing their research in producing better paint formulations with degradable biocides: they also consider using nanomaterials, such as nanosilver, nanocopper, nanozinc oxide, photocatalytic-active nanotitanium dioxide and nanosilica dioxide as additives for the protection of paints, against microbial degradation and physical and chemical deterioration. In the future nanomaterials should replace biodegradable biocides and improve the paint properties as well as impede colonization by microorganisms. At the time there is no guarantee that the nanomaterials in paints and façades will fulfill their task in the long run, since there are no long term studies available. From nanosilver doped paints it is known that silver is easily washed out by rain. Photocatalytic active nanotitanium dioxide adsorbs ultra violet light (UV-light) and generates hydroxyl radicals, which not only inhibit microbial growth but can also initiate or accelerate the photocatalytic degradation of the paint matrix. Thus at this time it is still unknown if it makes sense to incorporate nanomaterials into paints. Intensive research and development are still needed in order to find the answers.

Pioneer marine biofilms on artificial surfaces including antifouling coatings immersed in two contrasting French Mediterranean coast sites.

Marine biofilm communities that developed on artificial substrata were investigated using molecular and microscopic approaches. Polystyrene, Teflon® and four antifouling (AF) paints were immersed for 2 weeks at two contrasting sites near Toulon on the French Mediterranean coast (Toulon military harbour and the natural protected area of Porquerolles Island). Biofilms comprising bacteria and diatoms were detected on all the coatings. The population structure as well as the densities of the microorganisms differed in terms of both sites and coatings. Lower fouling densities were observed at Porquerolles Island compared to Toulon harbour. All bacterial communities (analysed by PCR-DGGE) showed related structure, controlled both by the sites and the type of substrata. Pioneer microalgal communities were dominated by the same two diatom species, viz. Licmophora gracilis and Cylindrotheca closterium, at both sites, irrespective of the substrata involved. However, the density of diatoms followed the same trend at both sites with a significant effect of all the AF coatings compared to Teflon and polystyrene.