RESUMEN
The rising utilization of PLA/PBAT-ST20 presents potential ecological risks stemming from its casual disposal and incomplete degradation. To solve this problem, this study investigated the degradation capabilities of PLA/PBAT-ST20 by a co-culture system comprising two thermophilic bacteria, Pseudomonas G1 and Kocuria G2, selected and identified from the thermophilic phase of compost. Structural characterization results revealed that the strains colonized the PLA/PBAT-ST20's surface, causing holes and cracks, with an increase in the carbonyl index (CI) and polydispersity index (PDI), indicating oxidative degradation. Enzyme activity results demonstrated that the co-culture system significantly enhanced the secretion and activity of proteases and lipases, promoting the breakdown of ester bonds. LC-QTOF-MS results showed that various intermediate products were obtained after degradation, ultimately participating in the TCA cycle (ko00020), further completely mineralized. Additionally, after 15-day compost, the co-culture system achieved a degradation rate of 72.14 ± 2.1 wt% for PBAT/PLA-ST20 films, with a decrease in the abundance of plastic fragments of all sizes, demonstrating efficient degradation of PLA/PBAT-ST20 films. This study highlights the potential of thermophilic bacteria to address plastic pollution through biodegradation and emphasizes that the co-culture system could serve as an ideal solution for the remediation of PLA/PBAT plastics.
Asunto(s)
Biodegradación Ambiental , Técnicas de Cocultivo , Pseudomonas/metabolismo , Pseudomonas/enzimología , Poliésteres/metabolismo , Poliésteres/química , Redes y Vías Metabólicas , Plásticos Biodegradables/metabolismo , Plásticos Biodegradables/química , Microbiología del SueloRESUMEN
The potential impacts of biodegradable and nonbiodegradable microplastics (MPs) on rhizosphere microbial nitrogen (N) transformation processes remain ambiguous. Here, we systematically investigated how biodegradable (polybutylene succinate, PBS) MPs and nonbiodegradable (polyethylene, PE) MPs affect microbial N processes by determining rhizosphere soil indicators of typical Glycine max (soybean)-soil (i.e., red and brown soils) systems. Our results show that MPs altered soil pH and dissolved organic carbon in MP/soil type-dependent manners. Notably, soybean growth displayed greater sensitivity to 1% (w/w) PBS MP exposure in red soil than that in brown soil since 1% PBS acidified the red soil and impeded nutrient uptake by plants. In the rhizosphere, 1% PBS negatively impacted microbial community composition and diversity, weakened microbial N processes (mainly denitrification and ammonification), and disrupted rhizosphere metabolism. Overall, it is suggested that biodegradable MPs, compared to nonbiodegradable MPs, can more significantly influence the ecological function of the plant-soil system.
Asunto(s)
Plásticos Biodegradables , Biodegradación Ambiental , Glycine max , Microplásticos , Microbiología del Suelo , Suelo , Plásticos Biodegradables/química , Plásticos Biodegradables/metabolismo , Concentración de Iones de Hidrógeno , Microplásticos/química , Microplásticos/metabolismo , Suelo/química , Glycine max/química , Glycine max/crecimiento & desarrollo , Glycine max/metabolismo , Glycine max/microbiología , Nitrógeno/metabolismo , Rizosfera , Fenómenos Químicos , MicrobiotaRESUMEN
With an increase in the commercialization of bioplastics, the importance of screening for plastic-degrading strains and microbes has emerged. Conventional methods for screening such strains are time-consuming and labor-intensive. Therefore, we suggest a method for quickly and effectively screening plastic-degrading microbial strains through dual esterase assays for soil and isolated strains, using p-nitrophenyl alkanoates as substrates. To select microbe-abundant soil, the total amount of phospholipid fatty acids (PLFAs) included in each soil sample was analyzed, and esterase assays were performed for each soil sample to compare the esterase activity of each soil. In addition, by analyzing the correlation coefficients and sensitivity between the amount of PLFAs and the degree of esterase activity according to the substrate, it was confirmed that substrate pNP-C2 is the most useful index for soil containing several microbes having esterase activity. In addition, esterase assays of the isolated strains allowed us to select the most active strain as the degrading strain, and 16S rRNA results confirmed that it was Bacillus sp. N04 showed the highest degradation activity for polybutylene succinate (PBS) as measured in liquid culture for 7 days, with a degradation yield of 99%. Furthermore, Bacillus sp. N04 showed degradation activity against various bioplastics. We propose the dual application of p-nitrophenyl alkanoates as an efficient method to first select the appropriate soil and then to screen for plastic-degrading strains in it, and conclude that pNP-C2 in particular, is a useful indicator.
Asunto(s)
Biodegradación Ambiental , Esterasas , Nitrofenoles , Microbiología del Suelo , Nitrofenoles/metabolismo , Esterasas/metabolismo , Suelo/química , Bacterias/metabolismo , Bacterias/genética , Bacterias/aislamiento & purificación , Bacterias/clasificación , ARN Ribosómico 16S/genética , Ácidos Grasos/metabolismo , Bacillus/metabolismo , Bacillus/genética , Bacillus/aislamiento & purificación , Fosfolípidos/metabolismo , Plásticos Biodegradables/metabolismoRESUMEN
Cupriavidus necator is a facultative chemolithoautotrophic bacterium able to convert carbon dioxide into poly-3-hydroxybutyrate. This is highly promising as the conversion process allows the production of sustainable and biodegradable plastics. Poly-3-hydroxybutyrate accumulation is known to be induced by nutrient starvation, but information regarding the optimal stress conditions controlling the process is still heterogeneous and fragmentary. This study presents a comprehensive comparison of the effects of nutrient stress conditions, namely nitrogen, hydrogen, phosphorus, oxygen, and magnesium deprivation, on poly-3-hydroxybutyrate accumulation in C. necator DSM545. Nitrogen starvation exhibited the highest poly-3-hydroxybutyrate accumulation, achieving 54% of total cell dry weight after four days of nutrient stress, and a carbon conversion efficiency of 85%. The gas consumption patterns indicated flexible physiological mechanisms underlying polymer accumulation and depolymerization. These findings provide insights into strategies for efficient carbon conversion into bioplastics, and highlight the key role of C. necator for future industrial-scale applications.
Asunto(s)
Cupriavidus necator , Hidroxibutiratos , Nitrógeno , Poliésteres , Cupriavidus necator/metabolismo , Hidroxibutiratos/metabolismo , Poliésteres/metabolismo , Nitrógeno/metabolismo , Procesos Autotróficos , Oxígeno/metabolismo , Fósforo/metabolismo , Carbono/metabolismo , Nutrientes/metabolismo , Plásticos/metabolismo , Hidrógeno/metabolismo , Plásticos Biodegradables/metabolismo , Magnesio/metabolismo , PolihidroxibutiratosRESUMEN
Plastic production reached 400 million tons in 2022 (ref. 1), with packaging and single-use plastics accounting for a substantial amount of this2. The resulting waste ends up in landfills, incineration or the environment, contributing to environmental pollution3. Shifting to biodegradable and compostable plastics is increasingly being considered as an efficient waste-management alternative4. Although polylactide (PLA) is the most widely used biosourced polymer5, its biodegradation rate under home-compost and soil conditions remains low6-8. Here we present a PLA-based plastic in which an optimized enzyme is embedded to ensure rapid biodegradation and compostability at room temperature, using a scalable industrial process. First, an 80-fold activity enhancement was achieved through structure-based rational engineering of a new hyperthermostable PLA hydrolase. Second, the enzyme was uniformly dispersed within the PLA matrix by means of a masterbatch-based melt extrusion process. The liquid enzyme formulation was incorporated in polycaprolactone, a low-melting-temperature polymer, through melt extrusion at 70 °C, forming an 'enzymated' polycaprolactone masterbatch. Masterbatch pellets were integrated into PLA by melt extrusion at 160 °C, producing an enzymated PLA film (0.02% w/w enzyme) that fully disintegrated under home-compost conditions within 20-24 weeks, meeting home-composting standards. The mechanical and degradation properties of the enzymated film were compatible with industrial packaging applications, and they remained intact during long-term storage. This innovative material not only opens new avenues for composters and biomethane production but also provides a feasible industrial solution for PLA degradation.
Asunto(s)
Plásticos Biodegradables , Biodegradación Ambiental , Enzimas Inmovilizadas , Hidrolasas , Poliésteres , Ingeniería de Proteínas , Plásticos Biodegradables/química , Plásticos Biodegradables/metabolismo , Enzimas Inmovilizadas/química , Enzimas Inmovilizadas/metabolismo , Hidrolasas/metabolismo , Hidrolasas/química , Poliésteres/química , Poliésteres/metabolismo , Suelo/química , Temperatura , Estabilidad de Enzimas , CompostajeRESUMEN
Mulching is a common method increasing crop yield and achieving out-of-season production; nevertheless, their removal poses a significant environmental danger. In this scenario, the use of biodegradable plastic mulches comes up as a solution to increase the sustainability of this practice, as they can be tilled in soil without risk for the environment. In this context, it is important to study the microbial response to this practice, considering their direct involvement in plastic biodegradation. This study evaluated the biodegradation of three commercial mulch residues: one conventional non-biodegradable mulch versus two biodegradable ones (white and black compostable Mater-Bi mulches). The experiment was conducted under three incubation temperatures (room temperature 20-25 °C, 30 °C, and 45 °C) for a 6-month trial using fallow agricultural soil. Soil without plastic mulch residues was used as a control. White mater-bi biodegradable mulch residues showed higher degradation rates up to 88.90% at 30 °C, and up to 69.15% at room temperature. Furthermore, incubation at 45 °C determines the absence of degradation for all types of mulch considered. Moreover, bacterial alpha diversity was primarily influenced by plastic type and temperature, while fungal populations were mainly affected by temperature. Beta diversity was impacted by all experimental variables. Predicted functional genes crucial for degrading complex substrates, including those encoding hydrolases, cutinases, cellobiosidases, and lipases, were derived from 16S rRNA gene sequencing data. Cluster analysis based on predicted enzyme-encoding gene abundance revealed two clusters, mainly linked to sampling time. Finally, core microbiome analysis identified dominant bacterial and fungal taxa in various soil-plastic ecosystems during degradation, pinpointing species potentially involved in plastic breakdown. The present study allows an assessment of how different temperatures affect the degradation of mulch residues in soil, providing important insights for different climatic growing zones. It also fills a gap in the literature by directly comparing the effects of biodegradable and polyethylene mulches on soil microbial communities.
Asunto(s)
Bacterias , Biodegradación Ambiental , Hongos , Microbiota , Polietileno , Microbiología del Suelo , Suelo , Temperatura , Bacterias/genética , Bacterias/clasificación , Bacterias/metabolismo , Bacterias/aislamiento & purificación , Hongos/genética , Hongos/metabolismo , Hongos/clasificación , Suelo/química , Plásticos Biodegradables/metabolismo , ARN Ribosómico 16S/genéticaRESUMEN
Plastics derived from fossil fuels are used ubiquitously owing to their exceptional physicochemical characteristics. However, the extensive and short-term use of plastics has caused environmental challenges. The biotechnological plastic conversion can help address the challenges related to plastic pollution, offering sustainable alternatives that can operate using bioeconomic concepts and promote socioeconomic benefits. In this context, using soil from a plastic-contaminated landfill, two consortia were established (ConsPlastic-A and -B) displaying versatility in developing and consuming polyethylene or polyethylene terephthalate as the carbon source of nutrition. The ConsPlastic-A and -B metagenomic sequencing, taxonomic profiling, and the reconstruction of 79 draft bacterial genomes significantly expanded the knowledge of plastic-degrading microorganisms and enzymes, disclosing novel taxonomic groups associated with polymer degradation. The microbial consortium was utilized to obtain a novel Pseudomonas putida strain (BR4), presenting a striking metabolic arsenal for aromatic compound degradation and assimilation, confirmed by genomic analyses. The BR4 displays the inherent capacity to degrade polyethylene terephthalate (PET) and produce polyhydroxybutyrate (PHB) containing hydroxyvalerate (HV) units that contribute to enhanced copolymer properties, such as increased flexibility and resistance to breakage, compared with pure PHB. Therefore, BR4 is a promising strain for developing a bioconsolidated plastic depolymerization and upcycling process. Collectively, our study provides insights that may extend beyond the artificial ecosystems established during our experiments and supports future strategies for effectively decomposing and valorizing plastic waste. Furthermore, the functional genomic analysis described herein serves as a valuable guide for elucidating the genetic potential of microbial communities and microorganisms in plastic deconstruction and upcycling.
Asunto(s)
Biodegradación Ambiental , Microbiota , Plásticos , Plásticos/metabolismo , Microbiología del Suelo , Tereftalatos Polietilenos/metabolismo , Contaminantes del Suelo/metabolismo , Polímeros/metabolismo , Bacterias/metabolismo , Bacterias/genética , Plásticos Biodegradables/metabolismo , Consorcios Microbianos , Pseudomonas putida/metabolismo , Pseudomonas putida/genéticaRESUMEN
Despite extensive substitution of biodegradable plastics (BPs) for conventional plastics (CPs), research on their environmental ecological consequences as microplastics (MPs) is scarce. This study aimed to fill this gap by investigating the impacts of six prototypical MPs (categorized into BMPs and CMPs) on plant growth, cadmium (Cd) translocation, and bacterial communities in contaminated sediments. Results showed both BMPs and CMPs hindered plant development; yet interestingly, BMPs provoked more pronounced physiological and biochemical changes alongside increased oxidative stress due to reactive oxygen species accumulation. Notably, most MP types promoted the absorption of Cd by plant roots potentially via a "dilution effect". BMPs also induced larger shifts in soil microbial metabolic functions compared to CMPs. Ramlibacter was identified as a key biomarker distinguishing BMPs from CMPs, with link to multiple N metabolic pathways and N assimilation. This study offers novel insights into intricate biochemical mechanisms and environmental chemistry behaviors underpinning MP-Cd interactions within the plant-microbe-sediment system, emphasizing BMPs' higher potential ecological risks based on their significant effects on plant health and microbial ecology. This work contributes to enhancing the comprehensive understanding of their ecological implications and potential threats to environmental security.
Asunto(s)
Cadmio , Sedimentos Geológicos , Microplásticos , Microbiología del Suelo , Contaminantes del Suelo , Cadmio/metabolismo , Cadmio/toxicidad , Microplásticos/toxicidad , Microplásticos/metabolismo , Sedimentos Geológicos/microbiología , Sedimentos Geológicos/química , Contaminantes del Suelo/metabolismo , Biodegradación Ambiental , Raíces de Plantas/metabolismo , Raíces de Plantas/microbiología , Plásticos Biodegradables/metabolismo , Plantas/metabolismo , Desarrollo de la Planta/efectos de los fármacosRESUMEN
Polyhydroxyalkanoates (PHAs) are important candidates for replacing petroleum-based plastics. This transition is urgent for the development of a biobased economy and to protect human health and natural ecosystems. PHAs are biobased and biodegradable polyesters that when blended with other polymers, such as poly(butylene adipate-co-terephthalate) (PBAT), acquire remarkable improvements in their properties, which allow them to comply with the requirements of packaging applications. However, the biodegradation of such blends should be tested to evaluate the impact of those polymers in the environment. For instance, PBAT is a compostable aliphatic-aromatic copolyester, and its biodegradation in natural environments, such as soil, is poorly studied. In this work, we evaluated the biodegradation of a bilayer film composed of PHB and PBAT, by a soil microbiome. The bilayer film reached 47 ± 1 % mineralization in 180 days and PHB was no longer detected after this period. The increased crystallinity of the PBAT residue was a clear sign of biodegradation, indicating that the amorphous regions were preferentially biodegraded. Seven microorganisms were isolated, from which 4 were closely related to microorganisms already known as PHB degraders, but the other 3 species, closely related to Streptomyces coelicoflavus, Clonostachys rosea and Aspergillus insuetus, were found for the first time as PHB degraders. Most remarkably, two fungi closely related to Purpureocillium lilacinum and Aspergillus pseudodeflectus (99.83 % and 100 % identity by ITS sequencing) were isolated and identified as PBAT degraders. This is very interesting due to the rarity of isolating PBAT-degrading microorganisms. These results show that the bilayer film can be biodegraded in soil, at mesophilic temperatures, showing its potential to replace synthetic plastics in food packaging.
Asunto(s)
Biodegradación Ambiental , Microbiota , Poliésteres , Microbiología del Suelo , Poliésteres/metabolismo , Poliésteres/química , Suelo/química , Contaminantes del Suelo/metabolismo , Polihidroxialcanoatos/metabolismo , Plásticos Biodegradables/metabolismoRESUMEN
Soil health is a crucial aspect of sustainable agriculture and food production, necessitating attention to the ecological risks associated with substantial amounts of mulch film residues. Biodegradable mulch films (BDMs) carry the same risk of mulch film residues formation as low-density polyethylene (LDPE) mulch films during actual use. More information is needed to elucidate the specific impacts of mulch film residues on the soil environment. Integrated 16S rRNA gene sequencing and non-targeted metabolomics, this study revealed the response patterns of bacterial communities, metabolites, and metabolic functions in the soil from three different agricultural regions to the presence of mulch film residues. LDPE mulch film residues negatively impacted the bacterial communities in the soils of Heilongjiang (HLJ) and Yunnan (YN) and had a lesser impact on the metabolic spectrum in the soils of HLJ, YN, and Xinjiang (XJ). BDM residues had a greater negative impact on all three soils in terms of both the bacterial communities and metabolites. The impact of BDM treatment on the soils of HLJ, YN, and XJ increased sequentially in that order. It is recommended that, when promoting the use of biodegradable mulch films, a fuller assessment should be made, accounting for local soil properties.
Asunto(s)
Agricultura , Bacterias , ARN Ribosómico 16S , Microbiología del Suelo , Contaminantes del Suelo , Bacterias/metabolismo , Bacterias/genética , Contaminantes del Suelo/metabolismo , Biodegradación Ambiental , Polietileno/química , Suelo/química , Poliésteres/metabolismo , Poliésteres/química , Plásticos Biodegradables/química , Plásticos Biodegradables/metabolismoRESUMEN
Biodegradable plastics, such as poly(butylene adipate terephthalate) (PBAT) and polylactic acid (PLA), are potential alternatives to conventional polyethylene (PE), both of which are associated with the production of microplastics (MPs). However, the toxicity of these compounds on medicinal plants and their differential effects on plant morphophysiology remain unclear. This study supplemented soils with MPs sized at 200 µm at a rate of 1% w/w and incubated them for 50 days to investigate the impact of MPs on the growth and metabolites of dandelion (Taraxacum mongolicum Hand.-Mazz.). The results demonstrated that the investigated MPs decreased the growth of dandelion seedlings, induced oxidative stress, and altered the activity of antioxidant enzymes (superoxide dismutase, peroxidase, and catalase). Based on the comprehensive toxicity assessment results, the ecological toxicity was in the following order: PE MPs > PBAT MPs > PLA MPs. Metabolomics analyses revealed metabolic reprogramming in dandelion plants, leading to the enrichment of numerous differentially accumulated metabolites (DAMs) in the leaves. These pathways include carbohydrate metabolism, energy metabolism, and biosynthesis of secondary metabolites, suggesting that dandelions respond to MP stress by enhancing the activity of sugar, organic acid, and amino acid metabolic pathways. In addition, phenolic acids and flavonoids are critical for maintaining the balance in the antioxidant defense system. Our results provide substantial insights into the toxicity of biodegradable MPs to plants and shed light on plant defense and adaptation strategies. Further assessment of the safety of biodegradable MPs in terrestrial ecosystems is essential to provide guidance for environmentally friendly management.
Asunto(s)
Microplásticos , Polietileno , Contaminantes del Suelo , Taraxacum , Taraxacum/efectos de los fármacos , Taraxacum/metabolismo , Polietileno/toxicidad , Microplásticos/toxicidad , Contaminantes del Suelo/toxicidad , Contaminantes del Suelo/metabolismo , Metaboloma/efectos de los fármacos , Estrés Oxidativo/efectos de los fármacos , Biodegradación Ambiental , Poliésteres/metabolismo , Plásticos Biodegradables/metabolismo , Antioxidantes/metabolismoRESUMEN
The persistence of conventional fossil fuel-derived plastics in marine ecosystems has raised significant environmental concerns. Biodegradable plastics are being explored as an alternative. This study investigates the biodegradation behaviour in two marine environments of melt-extruded sheets of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) bioplastic as well as blends of PHBV with a non-toxic plasticiser (triethyl citrate, TEC) and composites of PHBV with wood flour. Samples were submerged for up to 35 weeks in two subtropical marine conditions: on the sandy seabed in the sublittoral benthic zone and the sandy seabed of an open air mesocosm with pumped seawater. Rates of biodegradation, lag times and times to 95 % mass loss (T95) were determined through mass loss data and Gompertz modelling. Mechanisms of biodegradation were studied through changes in molecular weight, mechanical properties and surface features. Results reveal a rapid biodegradation rate for all PHBV samples, demonstrating a range of specific biodegradation rates relative to exposed surface area of 0.03 ± 0.01 to 0.09 ± 0.04 mg.d-1.cm-2. This rapid rate of biodegradation meant that the subtle variations in biodegradation mechanisms across different sample thicknesses and additive compositions had little effect on overall lifetimes, with the T95 for most samples being around 250-350 days, regardless of site, highlighting the robust biodegradability of PHBV in seawater. It was only the PHBV-wood flour composite that showed faster biodegradation, and that was only in the exposed ocean site. The mesocosm site was otherwise shown to be a good model for the open ocean, with very comparable biodegradation rates and changes in mechanical properties over time.
Asunto(s)
Biodegradación Ambiental , Contaminantes Químicos del Agua/metabolismo , Contaminantes Químicos del Agua/análisis , Polihidroxialcanoatos/metabolismo , Agua de Mar/química , Poliésteres/metabolismo , Plásticos Biodegradables/metabolismo , PolihidroxibutiratosRESUMEN
Bioplastics were first introduced as environmentally friendly materials, with properties similar to those of conventional plastics. A bioplastic is defined as biodegradable if it can be decomposed into carbon dioxide under aerobic degradation, or methane and CO2 under anaerobic conditions, inorganic compounds, and new cellular biomass, by the action of naturally occurring microorganisms. This definition however does not provide any information on the environmental conditions, timescale and extent at which decomposition processes should occur. With regard to the aquatic environment, recognized standards have been established to assess the ability of plastics to undergo biodegradation; however, these standards fail to provide clear targets to be met to allow labelling of a bioplastic as biodegradable. Moreover, these standards grant the user an extensive leeway in the choice of process parameters. For these reasons, the comparison of results deriving from different studies is challenging. The authors analysed and discussed the degree of biodegradability of a series of biodegradable bioplastics in aquatic environments (both fresh and salt water) using the results obtained in the laboratory and from on-site testing in the context of different research studies. Biochemical Oxygen Demand (BOD), CO2 evolution, surface erosion and weight loss were the main parameters used by researchers to describe the percentage of biodegradation. The results showed a large variability both in weight loss and BOD, even when evaluating the same type of bioplastics. This confirms the need for a reference range of values to be established with regard to parameters applied in defining the biodegradability of bioplastics.
Asunto(s)
Biodegradación Ambiental , Contaminantes Químicos del Agua , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/metabolismo , Plásticos Biodegradables/metabolismo , Plásticos/metabolismo , Monitoreo del Ambiente/métodosRESUMEN
The degradation of biodegradable plastics poses a significant environmental challenge and requires effective solutions. In this study, an esterase derived from a phyllosphere yeast Pseudozyma antarctica (PaE) enhanced the degradation and mineralization of poly(butylene succinate-co-adipate) (PBSA) film in soil. PaE was found to substitute for esterases from initial degraders and activate sequential esterase production from soil microbes. The PBSA film pretreated with PaE (PBSA-E) rapidly diminished and was mineralized in soil until day 55 with high CO2 production. Soil with PBSA-E maintained higher esterase activities with enhancement of microbial abundance, whereas soil with inactivated PaE-treated PBSA film (PBSA-inact E) showed gradual degradation and time-lagged esterase activity increases. The fungal genera Arthrobotrys and Tetracladium, as possible contributors to PBSA-film degradation, increased in abundance in soil with PBSA-inact E but were less abundant in soil with PBSA-E. The dominance of the fungal genus Fusarium and the bacterial genera Arthrobacter and Azotobacter in soil with PBSA-E further supported PBSA degradation. Our study highlights the potential of PaE in addressing concerns associated with biodegradable plastic persistence in agricultural and environmental contexts.
Asunto(s)
Plásticos Biodegradables , Microbiota , Poliésteres/metabolismo , Esterasas/metabolismo , Saccharomyces cerevisiae/metabolismo , Suelo , Plásticos Biodegradables/metabolismo , Plásticos/metabolismoRESUMEN
IMPORTANCE: Biodegradable plastics can be used in applications where the end product cannot be efficiently recycled due to high levels of contaminations, e.g., food or soil. Some of these plastics have a dedicated end of life, such as composting, but their degradation in the marine environment is poorly understood. In this study we showed that marine microbial communities can degrade a range of biodegradable polymers with different physical and chemical properties and use these as a sole carbon source for growth. We have also provided insights into the degradation mechanisms using a combined metagenomic and metaproteomic approach. In addition, we have identified three new enzymes that are capable of degrading both aliphatic polymers and aliphatic-aromatic copolymers, which can be used for biotechnological applications.
Asunto(s)
Plásticos Biodegradables , Microbiota , Poliésteres/metabolismo , Plásticos/metabolismo , Polímeros , Plásticos Biodegradables/metabolismo , Biodegradación AmbientalRESUMEN
Overusing non-degradable plastics causes a series of environmental issues, inferring a switch to biodegradable plastics. Polyhydroxyalkanoates (PHAs) are promising biodegradable plastics that can be produced by many microbes using various substrates from waste feedstock. However, the cost of PHAs production is higher compared to fossil-based plastics, impeding further industrial production and applications. To provide a guideline for reducing costs, the potential cheap waste feedstock for PHAs production have been summarized in this work. Besides, to increase the competitiveness of PHAs in the mainstream plastics economy, the influencing parameters of PHAs production have been discussed. The PHAs degradation has been reviewed related to the type of bacteria, their metabolic pathways/enzymes, and environmental conditions. Finally, the applications of PHAs in different fields have been presented and discussed to induce comprehension on the practical potentials of PHAs.
Asunto(s)
Plásticos Biodegradables , Polihidroxialcanoatos , Polihidroxialcanoatos/metabolismo , Plásticos Biodegradables/metabolismo , Plásticos , Bacterias/metabolismo , IndustriasRESUMEN
Four types of biodegradable plastics were evaluated for their biodegradability in seawater collected at Ajigaura coast, Japan, in the presence or absence of marine sand. One of the plastics, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH), showed a degree of biodegradation in a seawater sample, and the addition of marine sand markedly accelerated its biodegradation. The addition of marine sand did not affect the bacterial composition of the biofilm that formed on PHBH, and the family Rhodobacteraceae, which was predicted to contribute to the degradation of PHBH, was dominant in biofilm communities regardless of the addition of marine sand. Marine sand may serve as a bacterial source, resulting in the accelerated degradation of PHBH.
Asunto(s)
Plásticos Biodegradables , Bacterias/genética , Bacterias/metabolismo , Plásticos Biodegradables/metabolismo , Biodegradación Ambiental , Biopelículas , Caproatos , Arena , Agua de Mar/microbiologíaRESUMEN
The influence of the inoculum-substrate ratio (ISR) on the mesophilic and thermophilic biochemical methane potential test of two biodegradable plastics was evaluated. Poly(lactic acid) (PLA) and polyhydroxybutyrate (PHB) were selected for this study, the first for being recalcitrant to mesophilic anaerobic digestion (AD) and the second, by contrast, for being readily biodegradable. Several ISRs, calculated on the basis of volatile solids (VS), were tested: 1, 2, 2.85, 4, and 10 g(VS of inoculum).g(VS of substrate)-1. A high ISR was associated with an enhanced methane production rate (i.e., biodegradation kinetics). However, the ultimate methane production did not change, except when inhibition was observed. Indeed, applying the lowest ISR to readily biodegradable plastics such as PHB resulted in inhibition of methane production. Based on these experiments, in order to have reproducible degradation kinetics and optimal methane production, an ISR between 2.85 and 4 is recommended for biodegradable plastics. The active microbial communities were analyzed, and the active bacteria differed depending on the plastic digested (PLA versus PHB) and the temperature of the process (mesophilic versus thermophilic). Previously identified PHB degraders (Ilyobacter delafieldii and Enterobacter) were detected in PHB-fed reactors. Thermogutta and Tepidanaerobacter were detected during the thermophilic AD of PLA, and they are probably involved in PLA hydrolysis and lactate conversion, respectively.
Asunto(s)
Plásticos Biodegradables , Microbiota , Metano/metabolismo , Anaerobiosis , Plásticos Biodegradables/metabolismo , Reactores Biológicos , Poliésteres/metabolismo , Aguas del Alcantarillado/microbiologíaRESUMEN
We discovered a biological mechanism supporting microbial degradation of bio-based poly(butylene succinate-co-adipate) (PBSA) plastic in soils under ambient and future climates. Here, we show that nitrogen-fixing bacteria facilitate the microbial degradation of PBSA by enhancing fungal abundance, accelerating plastic-degrading enzyme activities, and shaping/interacting with plastic-degrading fungal communities.
Asunto(s)
Plásticos Biodegradables , Bacterias Fijadoras de Nitrógeno , Plásticos Biodegradables/metabolismo , Biodegradación Ambiental , Hongos/metabolismo , Bacterias Fijadoras de Nitrógeno/metabolismo , SueloRESUMEN
The recycle and reutilization of food wastes is a promising alternative for supporting and facilitating circular economy. However, engineering industrially relevant model organisms to use food wastes as their sole carbon source has remained an outstanding challenge so far. Here, we reprogrammed Escherichia coli metabolism using modular pathway engineering followed by laboratory adaptive evolution to establish a strain that can efficiently utilize waste cooking oil (WCO) as the sole carbon source to produce monomers of bioplastics, namely, medium-chain α,ω-dicarboxylic acids (MCDCAs). First, the biosynthetic pathway of MCDCAs was designed and rewired by modifying the ß-oxidation pathway and introducing an ω-oxidation pathway. Then, metabolic engineering and laboratory adaptive evolution were applied for improving the pathway efficiency of fatty acids utilization. Finally, the engineered strain E. coli AA0306 was able to produce 15.26 g/L MCDCAs with WCO as the sole carbon source. This study provides an economically attractive strategy for biomanufacturing bioplastics from food wastes, which has a great potentiality to be developed as a wide range of enabling biotechnologies for achieving green revolution.