RESUMEN
BACKGROUND This systematic review of the literature aimed to identify published studies and evaluate them on the quality of root canal fillings (RCF) and procedural errors with rotary systems for in vivo studies prepared for different clinical settings. MATERIAL AND METHODS A full literature exploration was conducted in Clarivate Analytics' Web of Science, Elsevier's Scopus, Embase, and PubMed for studies published between January 2020 and March 2024. A manual search was also performed by reviewing the references of selected papers. The following keywords were used: quality of root canal filling(s) OR quality of root canal obturation, root canal obturation OR endodontic treatment, clinical setting (academic, private, governmental), AND/OR procedural errors and rotary instrumentation. RESULTS Sixteen clinical studies were included in this review. The acceptance percentages for obturation length, density, and taper were 76.3%, 74.7%, and 82.5%, respectively, indicating significantly high, good ratios. The overall RCF recorded showed that 68.2% of root canal obturations were considered acceptable. Acceptable rates remained higher than unacceptable rates in academic, hospital, and private settings, and percentages ranged from 65.2% to 93.0%. Only 5 studies reported procedural errors, namely, ledge formation, separated instruments, apical perforation, transportation, lateral perforation, and root/foramen perforation. CONCLUSIONS Using rotary instruments for different root canal treatment steps as instrumentation and obturations is highly recommended. Among different clinical setting and practice, these instruments resulted in a good and acceptable RCF, overall quality performed by those instruments, and few procedural errors.
Asunto(s)
Obturación del Conducto Radicular , Humanos , Obturación del Conducto Radicular/métodos , Obturación del Conducto Radicular/normas , Obturación del Conducto Radicular/instrumentación , Preparación del Conducto Radicular/instrumentación , Preparación del Conducto Radicular/métodos , Materiales de Obturación del Conducto Radicular/normas , Tratamiento del Conducto Radicular/instrumentación , Tratamiento del Conducto Radicular/métodosRESUMEN
The aim of this study is to evaluate the effect of different irrigation activation methods on root canal sealer penetration in teeth with simulated internal root resorption (IRR) and calcium hydroxide (CH) applied using a confocal laser scanning microscope (CLSM). 60 incisors with a single root and a single canal were included in the study. IRR cavities were created in the middle third of the root canal, and CH was placed. The samples were randomly divided into 4 groups (n = 15) according to the irrigation activation method to be tested: standard needle irrigation (SNI), sonic activation (EDDY), photon-induced photoacoustic flow (PIPS), and shock wave enhanced emission photoacoustic flow (SWEEPS). After irrigation activation applications, the root canals were obturated. Sections of 1.0 ± 0.1 mm were taken from the apical, middle, and coronal regions of each sample. The penetration area (µm2) and maximum penetration depth (µm) of the root canal sealer were examined by CLSM and analyzed using ImageJ software. Statistical analysis was performed with a one-way ANOVA and post-hoc Tukey test at the P < 0.05 significance level. Among all irrigation activation methods tested, both the penetration area and maximum penetration depth of the root canal sealer were greater in the coronal region than in the apical region (p < 0.05). In the IRR region, there was no difference in terms of maximum penetration depth between PIPS and SWEEPS (p > 0.05), it was highest in SWEEPS (p < 0.05). PIPS and SWEEPS were better than other irrigation activation methods in the penetration of root canal sealer in the resorption areas of teeth with IRR.
Asunto(s)
Hidróxido de Calcio , Microscopía Confocal , Resorción Radicular , Humanos , Materiales de Obturación del Conducto Radicular , Irrigación Terapéutica/métodos , Irrigación Terapéutica/instrumentación , Irrigantes del Conducto Radicular/administración & dosificación , Preparación del Conducto Radicular/métodos , Preparación del Conducto Radicular/instrumentación , IncisivoRESUMEN
AIM: This study aimed to compare the effectiveness of initial irrigation with sodium hypochlorite (NaOCl) and final irrigation with QMix, 40% citric acid, and 17% ethylenediaminetetraacetic acid (EDTA) on smear layer removal and dentin erosion. METHODOLOGY: Forty extracted human mandibular premolar teeth were randomly divided into four groups (n = 10) according to the type of final irrigants used: 17% EDTA, QMix, citric acid, and control (normal saline). Canals were mechanically prepared using ProTaper Next instruments to an apical size of X3. Subsequently, the roots were sectioned in a buccolingual direction. Scanning electron microscopy (SEM) was used to assess the presence of the smear layer and the amount of dentin erosion in the coronal, middle, and apical thirds of the root canals. RESULTS: In regards to smear layer removal, there was a significant difference between the control group and the other tested groups. Moreover, it was significantly higher in the coronal and middle thirds than in the apical third. However, there were no significant differences between the groups of EDTA, QMix, and citric acid. Concerning dentin erosion, citric acid produced significantly more dentin erosion than the other tested groups. CONCLUSION: Final irrigation with solutions had a higher ability to remove the smear layer in the coronal and middle thirds compared to the apical third. Of all the solutions tested, 40% citric acid had the most pronounced impact on dentin erosion, followed by 17% EDTA and QMix.
Asunto(s)
Ácido Cítrico , Dentina , Ácido Edético , Microscopía Electrónica de Rastreo , Irrigantes del Conducto Radicular , Capa de Barro Dentinario , Hipoclorito de Sodio , Humanos , Irrigantes del Conducto Radicular/farmacología , Ácido Cítrico/farmacología , Ácido Cítrico/química , Ácido Edético/química , Ácido Edético/farmacología , Hipoclorito de Sodio/farmacología , Dentina/efectos de los fármacos , Dentina/ultraestructura , Diente Premolar/efectos de los fármacos , Preparación del Conducto Radicular/métodos , Irrigación Terapéutica/métodos , Biguanidas/farmacología , Erosión de los Dientes , PolímerosRESUMEN
PURPOSE: To establish molar root canal model with micro-computed tomography (Micro-CT) and evaluate the removal efficiency of calcium hydroxide by different methods. METHODS: Eight molar teeth (24 root canals) extracted from the Department of General Dentistry, Shanghai Ninth People's Hospital from October 2023 to February 2024 were collected. Root canal preparation was instrumented by M3 according to standard root canal treatment procedures, then calcium hydroxide was injected into the root canal. One week later, the samples were randomly divided into 3 groups according to different irrigation methods(n=8): lateral opening syringe group, ultrasonic group and sonic vibration group. Micro-CT was used to reconstruct the root canal system before and after irrigation, and independent root canals were marked with different colors. The root canals were divided into upper root segment, middle root segment and apex segment. The volume of calcium hydroxide in each canal was calculated, and the clearance rate of calcium hydroxide was compared among the groups. SPSS 19.0 software package was used for statistical analysis. RESULTS: None of the three methods could completely remove calcium hydroxide from the root canal. When sodium hypochlorite was used as the flushing solution, the removal effect of ultrasonic group and sonic vibration group was significantly better than that of lateral opening syringe group(Pï¼0.05). The removal efficiency of calcium hydroxide by ultrasonic group and sonic vibration group was similar, and the difference was not statistically significant(Pï¼0.05). The removal rate of calcium hydroxide in apical segment was low. CONCLUSIONS: Micro-CT can reconstruct the molar root canal model efficiently for evaluating the removal effect of calcium hydroxide. The removal efficiency of calcium hydroxide in ultrasonic group and sonic vibration group is similar, and both are better than that in lateral syringe group.
Asunto(s)
Hidróxido de Calcio , Cavidad Pulpar , Microtomografía por Rayos X , Hidróxido de Calcio/química , Microtomografía por Rayos X/métodos , Humanos , Cavidad Pulpar/diagnóstico por imagen , Cavidad Pulpar/efectos de los fármacos , Diente Molar , Irrigantes del Conducto Radicular , Preparación del Conducto Radicular/métodos , Hipoclorito de Sodio , VibraciónRESUMEN
PURPOSE: The fatigue resistance of mechanical nickel-titanium files was tested by phase-locked infrared flaw detection method, in order to timely detect instrument wear, providing reference for clinical safe use and timely abandonment of nickel-titanium files. METHODS: Twenty sets of mechanical nickel-titanium files were selected from Reciproc-Blue(RB), MTWO and S3 respectively, and resin simulated root canals with 60° and 90° bending were prepared, which were divided into 6 subgroups. The fatigue value after use, the number of uses before breaking and the length of fracture of file 25# of each group of files were recorded and compared with SPSS 26.0 software package. RESULTS: With the increase of the times of use, the fatigue value of the three kinds of files increased gradually. Among the two types of curved root canals, the number of uses before fracture in RB group was significantly increased compared with that in MTWO group and S3 group (Pï¼0.05). The number of uses of the three kinds of files in the 90° curved root canal were significantly less than in the corresponding groups in the 60° curved root canal(Pï¼0.05). There was no significant difference in the length of fracture among the three kinds of files(Pï¼0.05). CONCLUSIONS: Phase-locked infrared flaw detection method can be used for non-destructive testing and quantitative analysis of the fatigue degree of nickel-titanium files.
Asunto(s)
Níquel , Titanio , Níquel/química , Titanio/química , Preparación del Conducto Radicular/instrumentación , Preparación del Conducto Radicular/métodos , Ensayo de Materiales/métodos , Falla de Equipo , Estrés Mecánico , Cavidad PulparRESUMEN
PURPOSE: To investigate the effect of GuttaFlow Bioseal root canal sealer on the vertical root fracture resistance of oval-shaped root canals. METHODS: Sixty orthodontically subtracted maxillary and mandibular single-rooted premolar teeth were scanned with CBCT. Oval canals were eligible when the buccolingual diameter of the canal was greater than or equal to two times the mesiodistal diameter at a distance of 5 mm from the root apex. Thirty single-rooted premolars with oval-shaped root canals were prepared to F2 using the Protaper system and then randomly divided into the GuttaFlow Bioseal filling group and iRoot SP filling group. Each group was further divided for root canal filling using warm vertical compression, cold lateral condensation and single cone techniques. Five single-rooted premolars was chosen as a negative control group. After 30 days of storage in a constant thermotank at 37 â and 100% humidity, the filled roots were vertically placed into a cylindrical model of self-polymerizing acrylic resin. Subsequently, the samples were fixed on the lower plate of a universal testing machine, and a ball of 4 mm in diameter was applied vertically with a downward pressure at a speed of 1 mm/min until fracture occurred. The load values were recorded in Newtons. The data were analyzed using SPSS 29.0 software package. Fracture patterns were examined under microscope. RESULTS: T test results showed no significant difference between the GuttaFlow Bioseal-filled and iRoot SP-filled groups (P=0.321). One-way ANOVA showed a significant difference in vertical fracture resistance between the groups(Pï¼0.05), and LSD analysis showed that the GuttaFlow Bioseal-filled sample teeth were significantly more resistant to vertical fracture than the iRoot SP when using the thermal vertical compression filling method and the single-tip method(Pï¼0.05). In contrast, the GuttaFlow BIoseal-filled group was significantly less resistant to vertical fracture than the iRoot SP group when using the cold lateral compression filling method(Pï¼0.05). CONCLUISIONS: GuttaFlow Bioseal has the potential to improve root resistance to vertical fracture when filling root canals using the thermal vertical pressurization method and the single-tip method, but more clinical trials are needed to validate this result and its long-term prognosis.
Asunto(s)
Gutapercha , Materiales de Obturación del Conducto Radicular , Obturación del Conducto Radicular , Materiales de Obturación del Conducto Radicular/química , Gutapercha/química , Humanos , Obturación del Conducto Radicular/métodos , Fracturas de los Dientes/prevención & control , Diente Premolar , Cavidad Pulpar , Combinación de Medicamentos , Dimetilpolisiloxanos/química , Análisis del Estrés Dental , Preparación del Conducto Radicular/métodos , Ácidos Polimetacrílicos/química , Tomografía Computarizada de Haz Cónico/métodosRESUMEN
BACKGROUND: This study aimed to investigate the perspectives, preferences, and clinical experiences regarding using electronic apex locator and apex locator integrated instrumentation of dentists and endodontists. METHODS: A web-based questionnaire consisting of 3 parts and 23 closed-ended questions to achieve the objective of the study was carried out in ethical conditions between August and October 2023. The first part of survey included demographic information, while the second part was about evaluating electronic apex locator usage. In the last part, only participants' use of apex locator-integrated instrumentation was evaluated. Data were analyzed at a significance level of p < 0.05. RESULTS: A total of 297 clinicians, including 59 endodontists and 34 endodontic residents/Ph.D. students participated in the questionnaire. Endodontists and endodontic residents/Ph.D. students perform statistically significantly more root canal treatments per week on average (p = 0.001). For the working length determination method (multiple option question), 78.5% of participants use an electronic apex locator and 39.7% apex locator-integrated engines. However, the preference rate for electronic apex determination technique was generally 95.6%, with the full rate confirmation of endodontists and endodontic residents/Ph.D. students (100%). A total of 21 endodontists out of 59 prefer apex locator integrated engine-driven instrumentation. Although many of these specialized clinicians use this technique, they stated that they measure electronic working length passively for confirmation of the working length before (90.5%) and after the preparation (66.7%). CONCLUSIONS: Dentists, as well as endodontists, are skeptical about apex locator-integrated engine-driven instrumentation. Using this technique as a supporter rather than a primary way for preparation within safe limits may give safer results in terms of treatment outcomes.
Asunto(s)
Ápice del Diente , Humanos , Estudios Transversales , Encuestas y Cuestionarios , Femenino , Masculino , Adulto , Actitud del Personal de Salud , Odontometría/instrumentación , Preparación del Conducto Radicular/instrumentación , Odontólogos/psicología , EndodoncistasRESUMEN
Background: With the increasing application of guided endodontics to treat complex root canal treatment, the entire process of root canal treatment has become more precise, reducing damage to tooth structure and improving success rates. However, due to the limitations of the operating space, the use of guided endodontic templates in posterior root canal treatment is less common. This study aims to compare the accuracy and reliability of selective laser melting (SLM) and traditional stereolithography etching (SLA) guided endodontic templates for posterior root canals, providing better treatment strategies for posterior root canal treatment. Methods: The teeth were randomly assigned to either SLM or SLA group. Preoperative cone-beam computed tomography (CBCT) and a three-dimensional (3D) scanner were used to establish the 3D root canal system and the accurate occlusal models of the teeth. The virtual access to the canal access was designed using Mimics 19.0 and 3-Matic 11.0. The endodontic access was performed based on either SLM or SLA templates. The accuracy of endodontic preparation was measured in three-dimensions by calculating deviations from planned accesses. The template height and tooth substance loss rates in each group were measured. Results: SLM-guided templates have a low average deviation at the entry point and apical portion of the bur of total posterior teeth (including premolars and molars) and individual molars (P < 0.05). Moreover, there was a significant difference in angular deviations and height of template in total posterior teeth and individual molars (P < 0.05). The mean substance loss rate of the SLA group was slightly greater than that of the SLM group, but the difference was not statistically (P > 0.05). Conclusions: SLM-guided endodontics provides a more predictable and precise location of root canal orifice for the treatment of posterior teeth.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Rayos Láser , Estereolitografía , Humanos , Tomografía Computarizada de Haz Cónico/métodos , Imagenología Tridimensional/métodos , Tratamiento del Conducto Radicular/métodos , Reproducibilidad de los Resultados , Preparación del Conducto Radicular/métodos , Diente Molar/diagnóstico por imagenRESUMEN
OBJECTIVES: This ex vivo study aimed to evaluate the influence of different filling techniques on the filling removal from oval root canals filled with bioceramic sealer. METHODS: Thirty-six mandibular incisors with single oval canals were filled with bioceramic sealer following the techniques (n = 12): single-cone, modified McSpadden, or continuous wave of condensation, and scanned by micro-computed tomography (micro-CT). The filling was removed using the Clearsonic ultrasound tip and Reciproc system up to the R40 instrument, and the working time was recorded. The teeth were scanned again by micro-CT. Percentage of remnant volume (mm³) of the filling material, dentin thickness, and root canal transportation were measured. The data was analyzed using parametric and non-parametric tests with a significance level of 5%. RESULTS: It took more time to remove the filling material using the continuous wave of condensation technique (p < 0.05), followed by the modified McSpadden and single-cone techniques. There was no difference (p > 0.05) when comparing the percentage of remaining filling material among the three groups, nor did it among the segments of each tooth. There was also no difference in the analysis of dentin thickness and transportation when comparing the groups (p > 0.05). CONCLUSIONS: The filling technique did not influence the amount of remaining filling material, dentin thickness, and transportation. The working time was longer with thermoplastic filling techniques. CLINICAL RELEVANCE: Endodontic retreatment in teeth filled with bioceramic sealers increases with their use. Several techniques are used to fill the root canals, thus, it is important to know whether the filling technique influences the non-surgical endodontic retreatment.
Asunto(s)
Incisivo , Materiales de Obturación del Conducto Radicular , Obturación del Conducto Radicular , Microtomografía por Rayos X , Humanos , Técnicas In Vitro , Obturación del Conducto Radicular/métodos , Incisivo/diagnóstico por imagen , Mandíbula/diagnóstico por imagen , Preparación del Conducto Radicular/métodos , Preparación del Conducto Radicular/instrumentación , Cavidad Pulpar/diagnóstico por imagenRESUMEN
Cleaning and shaping the root canal system are essential steps for performing successful endodontic therapy, and are challenging procedures in the apical region. This study aimed to conduct an ex vivo assessment of the debridement ability of the WaveOne Gold (Medium 35/.06) and TruNatomy (Medium 36/.03) systems in the apical third of round root canals of mandibular premolars. Forty-eight teeth, extracted for orthodontic or periodontal reasons, were divided into three groups (n=16), as follows: Group C, control (without instrumentation or irrigation); Group WOG, instrumentation with WaveOne Gold; Group TN, instrumentation with TruNatomy. A total of 40 mL of 2.5% sodium hypochlorite and 5 mL of 17% ethylenediamine tetraacetic acid were used per root canal in all the groups. Ten 0.5-µm serial cross-sections per specimen were obtained every 0.2 mm from a 2-mm segment of the apical region, extending from 1 to 3 mm short of the root apex. The sections were stained with hematoxylin-eosin and analyzed under a digital microscope (100x). The percentages of unprepared walls and remaining debris were quantified using ImageJ software. Generalized linear models were used to analyze the results (α=5%). Groups WOG and TN had significantly lower percentages of unprepared walls and remaining debris than Group C (p<0.05). There was no significant difference between groups WOG and TN for either of the variables studied (p>0.05). Instrumentation with the WaveOne Gold Medium and TruNatomy Medium instruments was associated with equivalent percentages of unprepared walls and remaining debris in the apical third of round canals of mandibular premolars.
Asunto(s)
Cavidad Pulpar , Preparación del Conducto Radicular , Humanos , Preparación del Conducto Radicular/instrumentación , Preparación del Conducto Radicular/métodos , Diente Premolar , Hipoclorito de Sodio/uso terapéutico , Ápice del Diente , Desbridamiento/métodos , Irrigantes del Conducto Radicular , Técnicas In VitroRESUMEN
PURPOSE: To explore the clinical effect of ultrasonic irrigation combined with chlorhexidine in root canal treatment of pulpitis. METHODS: A total of 120 patients with pulpitis treated with root canal therapy were randomly divided into a study group (n=60, 72 affected teeth) and a control group (n=60, 70 affected teeth). During root canal preparation, the study group was treated with chlorhexidine combined with ultrasonic irrigation, while the control group was treated with chlorhexidine conventional irrigation. The bacterial count and endotoxin content in the root canal before and after root canal preparation were compared between the two groups, as well as the endodontic inter-appointment pain (EIAP), lateral branch root canal filling rate, and degree of tooth pain after root canal treatment. The success rate of treatment was statistically analyzed after one-year follow-up. Statistical analysis was performed with SPSS 19.0 software package. RESULTS: After root canal preparation, the number of colonies in experimental group and control group was significantly decreased compared with that before root canal preparation(Pï¼0.05), and the number of colonies in experimental group was significantly lower than that in control group(Pï¼0.05). After root canal preparation, endotoxin levels in experimental group and control group were significantly lower than those before root canal preparation(Pï¼0.05), and the level in experimental group was significantly lower than that in control group(Pï¼0.05). The lateral branch root canal filling rate in the study group and the control group was 29.17% and 11.43%, respectively, with significant difference between the groups(Pï¼0.05). The incidence of EIAP was 4.17% and 14.29%, respectively, with significant difference between the two groups(Pï¼0.05). At 48 hours after surgery, the visual analogue score (VAS) of the study group and the control group was (2.74±0.61) and (3.29±0.68), respectively, which were significantly lower than at before surgery(Pï¼0.05). There was a significant difference in VAS score between the two groups 48 hours after surgery(Pï¼0.05). One week after surgery, the VAS score in the study group and the control group was (1.52±0.34) and (1.81±0.42), respectively, significantly lower than that before and 48 hours after surgery(Pï¼0.05). There was a significant difference in VAS score between the two groups at one week after surgery (Pï¼0.05). The successful rate of treatment in the control group was 84.62%, and 95.71% in the study group, with a significant difference between the two groups(Pï¼0.05). CONCLUSIONS: The application of ultrasonic irrigation combined with chlorhexidine in the treatment of pulpitis root canals can help reduce the level of bacteria and endotoxin after root canal preparation, alleviate the degree of postoperative tooth pain, and improve the filling rate of lateral branch root canals, with superior curative effects.
Asunto(s)
Clorhexidina , Pulpitis , Preparación del Conducto Radicular , Tratamiento del Conducto Radicular , Clorhexidina/administración & dosificación , Clorhexidina/uso terapéutico , Humanos , Pulpitis/terapia , Preparación del Conducto Radicular/métodos , Tratamiento del Conducto Radicular/métodos , Irrigación Terapéutica/métodos , Irrigantes del Conducto Radicular/uso terapéutico , Irrigantes del Conducto Radicular/administración & dosificación , Endotoxinas , Ultrasonido , Cavidad Pulpar/efectos de los fármacosRESUMEN
Both root canal sealer-based and supplementary protocols may influence removal of filling material during endodontic retreatment. Mesial root canals of extracted mandibular molars were prepared using HyFlex EDM 25/.08, and filled with a calcium silicate sealer (Bio-C Sealer), or an epoxy resin (AH Plus), using the single cone technique (n = 12). Retreatment was performed using ProDesign Logic (PDL) RT and PDL 35/.05. The specimens were randomly divided into two experimental groups (n = 12), and the sealers were distributed similarly. A supplementary protocol was performed with PDL 50/.01 or XP-endo Finisher. Root canal transportation and volume, in addition to the remaining filling material percentage were evaluated using high-resolution (5 µm voxel size) micro-CT. Statistical analysis was performed using t-tests (α = 0.05). Root canals filled with AH Plus presented high residual filling material (p < 0.05). Both protocols decreased residual volume of filling material in the apical third (p < 0.05). PDL 50/.01 increased the apical root canal volume (p < 0.05). No difference was observed between the systems regarding canal transportation (p > 0.05). In conclusion, AH Plus is more difficult to remove from the apical third than Bio-C Sealer. PDL 50/.01 and XP-endo Finisher enabled greater removal of filling materials in the apical third, in the retreatment of curved root canals, without promoting apical transport.
Asunto(s)
Resinas Epoxi , Ensayo de Materiales , Retratamiento , Materiales de Obturación del Conducto Radicular , Microtomografía por Rayos X , Materiales de Obturación del Conducto Radicular/química , Materiales de Obturación del Conducto Radicular/uso terapéutico , Humanos , Retratamiento/métodos , Resinas Epoxi/química , Resinas Epoxi/uso terapéutico , Preparación del Conducto Radicular/métodos , Preparación del Conducto Radicular/instrumentación , Cavidad Pulpar/diagnóstico por imagen , Cavidad Pulpar/efectos de los fármacos , Compuestos de Calcio/uso terapéutico , Silicatos/química , Reproducibilidad de los Resultados , Obturación del Conducto Radicular/métodos , Diente Molar , Valores de ReferenciaRESUMEN
BACKGROUND: Traditionally, pediatric endodontics lacked access to the full potential of rotary instruments. These instruments, designed for the permanent root canal system, often presented limitations when used in primary teeth. To address this, exclusive pediatric rotary files with regular improvements have been introduced, featuring superior cutting efficiency with a focus on precise alignment. This design offers the advantage of reduced risk of ledges, perforations, instrument separation, and canal transportation. This study aimed to compare and evaluate the effectiveness of Pro AF Baby Gold and Kedo-S rotary files in preparing primary tooth root canals during pulpectomy procedures through a meta-analysis. METHODOLOGY: The review was performed following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2020 guidelines. The review searched electronic databases from 2000 to February 2024 for studies evaluating the efficacy of Pro AF Baby Gold and Kedo-S files in terms of canal instrumentation, transportation, and centering ratio. The Cochrane risk of bias (ROB)-2 tool assessed quality, with analyses conducted using RevMan software version 5.3. The standardized mean difference (SMD) served as the summary with a random effects model (P < 0.05). RESULTS: Out of the five studies identified through the eligibility criteria, three were deemed suitable for a meta-analysis, while all five were included in a qualitative synthesis. The quality assessment revealed a presence of moderate-to-low ROB. The pooled analysis using SMD did not show any statistically significant differences between the files, except for the centering ratio in the mesiobuccal canal, where the Kedo-S file performed slightly better. In addition, the absence of any significant asymmetry in the funnel plot suggests that there is likely no publication bias present in the data. CONCLUSION: Pro AF Baby Gold files can be used as an alternative adjunct in pediatric endodontics to Kedo-S files and manual files.Prospero Registration: CRD42023469406.
Asunto(s)
Diseño de Equipo , Preparación del Conducto Radicular , Humanos , Preparación del Conducto Radicular/instrumentación , Diente Primario , Niño , Instrumentos Dentales , Pulpectomía/métodosRESUMEN
OBJECTIVES: To evaluate the mechanical properties of root canal dentin treated with sodium hypochlorite (NaOCl) in combination with hydroxyethylidene diphosphonic acid (HEDP) or ethylenediaminetetraacetic acid (EDTA). METHODS: For testing fracture resistance, 45 single-rooted teeth were instrumented and irrigated with NaOCl/HEDP, NaOCl/EDTA, or distilled water. Fifteen untreated teeth served as control. After obturation, specimens from the experimental groups were thermocycled, dynamically-loaded, and then statically-loaded in a universal testing machine until failure. For flexural strength analysis, 15 teeth were instrumented and irrigated with NaOCl/HEDP or NaOCl/EDTA. Root segments were sectioned into dentin bars and tested for flexural strength using a universal testing machine. For microhardness evaluation, 20 teeth were instrumented and irrigated with NaOCl/HEDP or NaOCl/EDTA. Dentin disks from the coronal-third of each root segment were prepared, one before and one after irrigation, for microhardness testing with a Knoop hardness tester. RESULTS: The highest fracture resistance was recorded in the untreated group, and the lowest in the EDTA group. Although the HEDP group had higher fracture resistance than the EDTA group, the distilled water group demonstrated even greater fracture resistance than the HEDP group. Specimens treated with HEDP had significantly higher flexural strength and microhardness values when compared with those treated with EDTA. CONCLUSION: The fracture resistance, flexural strength, and microhardness of root canal dentin were higher when root canals were irrigated with NaOCl/HEDP, when compared with NaOCl/EDTA. CLINICAL SIGNIFICANCE: Irrigating root canals with NaOCl combined with HEDP significantly improves the mechanical integrity of root canal dentin compared to the use of NaOCl with EDTA.
Asunto(s)
Quelantes , Dentina , Ácido Edético , Dureza , Ensayo de Materiales , Irrigantes del Conducto Radicular , Hipoclorito de Sodio , Dentina/efectos de los fármacos , Hipoclorito de Sodio/farmacología , Humanos , Ácido Edético/farmacología , Irrigantes del Conducto Radicular/farmacología , Quelantes/farmacología , Estrés Mecánico , Ácido Etidrónico/farmacología , Cavidad Pulpar/efectos de los fármacos , Resistencia Flexional , Análisis del Estrés Dental , Preparación del Conducto Radicular/métodos , Fracturas de los Dientes/prevención & control , Raíz del Diente/efectos de los fármacos , Docilidad , Temperatura , Obturación del Conducto Radicular/métodosRESUMEN
PURPOSE: To investigate the influence of various nickel-titanium (Ni-Ti) files on debris extrusion during the retreatment of teeth with simulated lateral root perforation, focusing on root resorption. METHODS: Sixty human mandibular premolar teeth were divided into groups with and without perforation and further subdivided based on the retreatment technique. Lateral root perforations were created in one group (Group 1), while the other group had no perforations (Group 2). Two retreatment techniques were compared: Remover (RE)+One RECI (OR) and ProTaper Universal Retreatment (PTUR)+WaveOne Gold (WOG). The weight of the extruded debris was determined. The time of both retreatment procedures was measured. Statistical analyses were performed using a two-way analysis of variance (ANOVA) test (P < 0.05). RESULTS: Teeth with simulated lateral root perforation exhibited higher extrusion of debris during retreatment. In both groups, RE+OR files led to more extruded debris than PTUR+WOG files. However, this difference was statistically significant in Group 2 (P < 0.001). Compared to PTUR+WOG files, RE+OR files showed a statistically significant longer time to remove obturation material (P < 0.001). CONCLUSION: Perforated teeth exhibited significantly higher debris extrusion. While both file systems demonstrated similar debris extrusion in perforated teeth, the RE+OR files significantly increased debris extrusion in non-perforated teeth compared to the PTUR+WOG files.
Asunto(s)
Níquel , Retratamiento , Titanio , Humanos , Preparación del Conducto Radicular/instrumentación , Diente Premolar , Raíz del Diente/lesiones , Resorción Radicular/etiologíaRESUMEN
BACKGROUND: This is a triple-blinded, prospective split-mouth clinical trial. It is important to shed light on the effect of different apical preparation sizes regarding postoperative pain within the same patient with the same pulpal histological status. The aim is to compare and evaluate the severity of postoperative pain following apical enlargement with two different sizes after the IBF using the visual analogue scale. METHODS: Fifty "teeth" in 25 patients were assigned into two equal groups (25 per group) using E3 Azure rotary files; Group A was prepared two sizes greater than the Initial binding file (IBF) (the largest K file to bind at the actual working length) mesial canals, which were enlarged to 35#/0.04 and 40#/0.04 for the distal canals. Group B was prepared in three sizes larger than the IBF: 40#/0.04 for mesial canals and 45#/0.04 for the distal canals. On a modified VAS form, patients were questioned to indicate the degree of their pain and assisted in narrating their pain intensity during the following periods: 12, 24, and 72 h, and after a week. VAS data were non-parametric and analyzed using the signed-rank test for intergroup comparisons, Freidman's test, and the Nemenyi post hoc test for intragroup comparisons. The significance level was set at p < 0.05. RESULTS: showed that regardless of measurement time, enlargement of apical preparation was significantly associated with higher pain scores (p < 0.001). Within both groups, there was a significant reduction of measured pain score with time, with values measured after 12 and 24 h being significantly higher than values measured at other intervals (p < 0.001) and with values measured after three days being significantly higher than 1-week value (p < 0.001). CONCLUSION: The size of apical preparation had a significant effect on postoperative pain. TRIAL REGISTRATION NUMBER & DATE: NCT05847738, 08/05/2023.
Asunto(s)
Dimensión del Dolor , Dolor Postoperatorio , Preparación del Conducto Radicular , Humanos , Dolor Postoperatorio/etiología , Dolor Postoperatorio/prevención & control , Femenino , Masculino , Preparación del Conducto Radicular/métodos , Preparación del Conducto Radicular/instrumentación , Estudios Prospectivos , Adulto , Persona de Mediana Edad , Ápice del DienteRESUMEN
OBJECTIVE: Although apex locators are generally effective tools for determining root canal working length, they may produce inaccurate results in some cases. The present study aimed to evaluate the efficacy of ultrasonography as an alternative method for measuring root canal length. MATERIALS AND METHODS: Forty-seven anterior teeth with apical lesions were selected for the study. Initially, an electronic apex locator was used to measure the working length. Subsequently, ultrasonography was employed to visualize the root apex and determine the working length. During ultrasound imaging, a K-file No. 15 was inserted into the root canal until its tip was visible on the ultrasound monitor. Measurements obtained from both methods were compared using an independent sample t-test. Correlations were assessed with the Pearson correlation coefficient, and agreement was determined using the BlandâAltman plot. RESULTS: The mean working canal length was 19.9 mm for the apex locator and 20.6 mm for the ultrasonography-guided method. No significant differences were observed between the data obtained using the apex locator method and the data obtained using the ultrasonography guidance method. Furthermore, a high level of agreement was identified between the two techniques. CONCLUSION: Ultrasonography can be used to visualize the apex effectively and determine canal length, especially when canal length determination is uncertain for various reasons.
Asunto(s)
Cavidad Pulpar , Odontometría , Preparación del Conducto Radicular , Ápice del Diente , Humanos , Ápice del Diente/diagnóstico por imagen , Ápice del Diente/anatomía & histología , Cavidad Pulpar/diagnóstico por imagen , Cavidad Pulpar/anatomía & histología , Odontometría/métodos , Odontometría/instrumentación , Preparación del Conducto Radicular/instrumentación , Preparación del Conducto Radicular/métodos , Ultrasonografía/métodos , Incisivo/diagnóstico por imagen , Incisivo/anatomía & histología , AdultoRESUMEN
OBJECTIVES: This study aimed to investigate the influence of access cavity designs on the mechanical properties of a single-rooted mandibular first premolar tooth under various static loads using a finite element analysis. MATERIALS AND METHODS: 3-dimensional FEA designs were modeled according to the access cavity designs: an intact tooth (control), traditional access cavity (TEC-I), traditional access cavity with Class-II mesio-occlusal cavity design (TEC-II), conservative access cavity (CEC), ninja access cavity (NEC), caries-driven access cavity (Cd-EC), buccal access cavity (BEC) and bucco-occlusal access cavity (BOEC). After the simulated access cavity preparations, root canal treatment was simulated and three different static loads which mimicked oblique and vertical mastication forces were applied to the models. The stress distribution and maximum Von Misses stress values were recorded. The maximum stress values were obtained on both enamel and dentin under multi-point vertical loads. RESULTS: The maximum stress values were obtained on both enamel and dentin under multi-point vertical loads. Under all load types, the minimum stress distribution was observed in the control group, followed by CEC, NEC and BEC designs. The highest stress concentration was detected in Cd-EC and TEC-II designs. Under single-point vertical loading, the stress was mostly concentrated in the lingual PCD area, while under multi-point vertical loading, the entire root surface was stress-loaded except for the lingual apical third of the root. CONCLUSION: Preserving tooth tissue by simulating CEC, NEC and BEC access cavities increased the load capacity of a single-rooted mandibular first premolar following simulated endodontic treatment.
Asunto(s)
Diente Premolar , Análisis del Estrés Dental , Análisis de Elementos Finitos , Mandíbula , Humanos , Preparación de la Cavidad Dental/métodos , Fenómenos Biomecánicos , Estrés Mecánico , Preparación del Conducto Radicular/métodosRESUMEN
AIM: The aim of the current study was to evaluate the penetration depth and smear layer removal of root canal irrigant using various irrigation activation techniques. MATERIALS AND METHODS: In this investigation, sixty single-rooted premolars extracted for orthodontic purposes were chosen. Diamond burs were used to create an access cavity, and #10 K-file was used to determine the patency. About sixty samples were divided into the following three groups (20 samples in each group), group I: Irrigation with conventional needle, group II: Activation of EndoVac system, group III: Passive ultrasonic irrigation (PUI). The efficacy of the smear layer was assessed using a scanning electron microscopy at a ×2000 magnification. One-way ANOVA was used to record and analyze the data. All statistical analyses were performed with a significance level of p < 0.05. RESULTS: At coronal third, the maximum smear layer was removed in group II (1.26 ± 0.02) followed by group III (1.84 ± 0.16) and group I (2.89 ± 0.21). At middle third, smear layer removal was maximum in group I (1.18 ± 0.10) followed by group III (1.72 ± 0.09) and group I (2.66 ± 0.18). At apical third, the more smear layer was removed in group II (1.02 ± 0.01) followed by group III (1.58 ± 0.08) and group I (2.38 ± 0.06). There was a highly significant difference found between the three different irrigation systems at all three levels (p < 0.001). CONCLUSION: In conclusion, every irrigation device that was evaluated was successful in removing the smear layer from the root canal. However, the EndoVac system group removed a greater amount of smear layer compared with PUI and conventional needle group. CLINICAL SIGNIFICANCE: With the goal of promoting cleaning that is beyond the ability of mechanical devices, irrigation is a crucial part of root canal therapy. If an efficient irrigation delivery system is used, the irrigants can reach the working length (WL). This type of distribution system needs to provide a suitable amount of irrigants up to the WL, as well as have enough flow and be effective at debriding the entire canal system. How to cite this article: Pujari MD, Das M, Das A, et al. Assessment of Smear Layer Removal and Penetration Depth of Root Canal Irrigant Using Different Irrigation Activation Systems: A Comparative Study. J Contemp Dent Pract 2024;25(4):331-334.