Tannic acid coating gauze immobilized with thrombin with ultra-high coagulation activity and antimicrobial property for uncontrollable hemorrhage.

Rapid and safe hemostasis is crucial for the survival of bleeding patients in prehospital care. It is urgent to develop high performance hemostatic material to control the massive hemorrhage in the military field and accidental trauma. In this work, an efficient protein hemostat of thrombin was immobilized onto commercial gauze, which was mediated by self-polymerization and anchoring of tannic acid (TA). Through TA treatment, the efficient immobilization of thrombin was achieved, preserving both the biological activity of thrombin and the physical properties of the dressing, including absorbency, breathability, and mechanical performance. Moreover, in the presence of TA coating and thrombin, Gau@TA/Thr could obviously shortened clotting time and enriched blood components such as plasma proteins, platelets, and red blood cells, thereby exhibiting an enhanced in vitro coagulation effect. In SD rat liver volume defect and artery transection hemorrhage models, Gau@TA/Thr still had outstanding hemostatic performance. Besides, the Gau@TA/Thr gauze had inherent antibacterial property and demonstrated excellent biocompatibility. All results suggested that Gau@TA/Thr would be a potential candidate for treating uncontrollable hemorrhage in prehospital care.

Polydopamine-mediated immobilization of BMP-2 onto electrospun nanofibers enhances bone regeneration.

Dealing with bone defects is a significant challenge to global health. Electrospinning in bone tissue engineering has emerged as a solution to this problem. In this study, we designed a PVDF-b-PTFE block copolymer by incorporating TFE, which induced a phase shift in PVDF fromαtoß, thereby enhancing the piezoelectric effect. Utilizing the electrospinning process, we not only converted the material into a film with a significant surface area and high porosity but also intensified the piezoelectric effect. Then we used polydopamine to immobilize BMP-2 onto PVDF-b-PTFE electrospun nanofibrous membranes, achieving a controlled release of BMP-2. The scaffold's characters were examined using SEM and XRD. To assess its osteogenic effectsin vitro, we monitored the proliferation of MC3T3-E1 cells on the fibers, conducted ARS staining, and measured the expression of osteogenic genes.In vivo, bone regeneration effects were analyzed through micro-CT scanning and HE staining. ELISA assays confirmed that the sustained release of BMP-2 can be maintained for at least 28 d. SEM images and CCK-8 results demonstrated enhanced cell viability and improved adhesion in the experimental group. Furthermore, the experimental group exhibited more calcium nodules and higher expression levels of osteogenic genes, including COL-I, OCN, and RUNX2. HE staining and micro-CT scans revealed enhanced bone tissue regeneration in the defective area of the PDB group. Through extensive experimentation, we evaluated the scaffold's effectiveness in augmenting osteoblast proliferation and differentiation. This study emphasized the potential of piezoelectric PVDF-b-PTFE nanofibrous membranes with controlled BMP-2 release as a promising approach for bone tissue engineering, providing a viable solution for addressing bone defects.

Vascular stent with immobilized anti-inflammatory chemerin 15 peptides mitigates neointimal hyperplasia and accelerates vascular healing.

Endovascular stenting is a safer alternative to open surgery for use in treating cerebral arterial stenosis and significantly reduces the recurrence of ischemic stroke, but the widely used bare-metal stents (BMSs) often result in in-stent restenosis (ISR). Although evidence suggests that drug-eluting stents are superior to BMSs in the short term, their long-term performances remain unknown. Herein, we propose a potential vascular stent modified by immobilizing clickable chemerin 15 (C15) peptides on the stent surface to suppress coagulation and restenosis. Various characterization techniques and an animal model were used to evaluate the surface properties of the modified stents and their effects on endothelial injury, platelet adhesion, and inflammation. The C15-immobilized stent could prevent restenosis by minimizing endothelial injury, promoting physiological healing, restraining the platelet-leukocyte-related inflammatory response, and inhibiting vascular smooth muscle cell proliferation and migration. Furthermore, in vivo studies demonstrated that the C15-immobilized stent mitigated inflammation, suppressed neointimal hyperplasia, and accelerated endothelial restoration. The use of surface-modified, anti-inflammatory, endothelium-friendly stents may be of benefit to patients with arterial stenosis. STATEMENT OF SIGNIFICANCE: Endovascular stenting is increasingly used for cerebral arterial stenosis treatment, aiming to prevent and treat ischemic stroke. But an important accompanying complication is in-stent restenosis (ISR). Persistent inflammation has been established as a hallmark of ISR and anti-inflammation strategies in stent modification proved effective. Chemerin 15, an inflammatory resolution mediator with 15-aa peptide, was active at picomolar through cell surface receptor, no need to permeate cell membrane and involved in resolution of inflammation by inhibiting inflammatory cells adhesion, modulating macrophage polarization into protective phenotype, and reducing inflammatory factors release. The implications of this study are that C15 immobilized stent favors inflammation resolution and rapid re-endothelialization, and exhibits an inhibitory role of restenosis. As such, it helps the decreased incidence of ISR.

Actinomycin-X2-Immobilized Silk Fibroin Film with Enhanced Antimicrobial and Wound Healing Activities.

Actinomycin is a family of chromogenic lactone peptides that differ in their peptide portions of the molecule. An antimicrobial peptide, actinomycin X2 (Ac.X2), was produced through the fermentation of a Streptomyces cyaneofuscatus strain. Immobilization of Ac.X2 onto a prepared silk fibroin (SF) film was done through a carbodiimide reaction. The physical properties of immobilized Ac.X2 (antimicrobial films, AMFs) were analyzed by ATR-FTIR, SEM, AFM, and WCA. The findings from an in vitro study showed that AMFs had a more broad-spectrum antibacterial activity against both S. aureus and E. coli compared with free Ac.X2, which showed no apparent strong effect against E. coli. These AMFs showed a suitable degradation rate, good hemocompatibility, and reduced cytotoxicity in the biocompatibility assay. The results of in vivo bacterially infected wound healing experiments indicated that wound inflammation was prevented by AMFs, which promoted wound repair and improved the wound microenvironment. This study revealed that Ac.X2 transformation is a potential candidate for skin wound healing.

A Synergistic New Approach Toward Enhanced Antibacterial Efficacy via Antimicrobial Peptide Immobilization on a Nitric Oxide-Releasing Surface.

Despite technological advancement, nosocomial infections are prevalent due to the rise of antibiotic resistance. A combinatorial approach with multimechanistic antibacterial activity is desired for an effective antibacterial medical device surface strategy. In this study, an antimicrobial peptide, nisin, is immobilized onto biomimetic nitric oxide (NO)-releasing medical-grade silicone rubber (SR) via mussel-inspired polydopamine (PDA) as a bonding agent to reduce the risk of infection. Immobilization of nisin on NO-releasing SR (SR-SNAP-Nisin) and the surface characteristics were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy and contact angle measurements. The NO release profile (7 days) and diffusion of SNAP from SR-SNAP-Nisin were quantified using chemiluminescence-based nitric oxide analyzers and UV-vis spectroscopy, respectively. Nisin quantification showed a greater affinity of nisin immobilization toward SNAP-doped SR. Matrix-assisted laser desorption/ionization mass spectrometry analysis on surface nisin leaching for 120 h under physiological conditions demonstrated the stability of nisin immobilization on PDA coatings. SR-SNAP-Nisin shows versatile in vitro anti-infection efficacy against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus in the planktonic and adhered states. Furthermore, the combination of NO and nisin has a superior ability to impair biofilm formation on polymer surfaces. SR-SNAP-Nisin leachates did not elicit cytotoxicity toward mouse fibroblast cells and human umbilical vein endothelial cells, indicating the biocompatibility of the material in vitro. The preventative and therapeutic potential of SR-SNAP-Nisin dictated by two bioactive agents may offer a promising antibacterial surface strategy.

Antibacterial directed chemotherapy using AS-48 peptide immobilized on biomimetic magnetic nanoparticles combined with magnetic hyperthermia.

The design of new strategies to increase the effectiveness of the antibacterial treatments is a main goal in public health. So, the aim of the study was to achieve a local antibacterial directed therapy as novel alternative allowing both, the delivery of the drug at the target, while minimizing undesirable side effects, thus anticipating an enhanced effectiveness. Hence, we have developed an innovative nanoformulation composed by biomimetic magnetic nanoparticles functionalized with the antimicrobial peptide AS-48 and its potential against Gram-positive and Gram-negative bacteria, either by itself or combined with magnetic hyperthermia has been investigated. Besides, the physical properties, binding efficiency, stability and mechanism of action of this nanoassembly are analyzed. Remarkably, the nanoassembly has a strong bactericidal effect on Gram-positive bacteria, but surprisingly also on E. coli and, finally, when combined with magnetic hyperthermia, on P. aeruginosa and K. pneumoniae. The results obtained represent a breakthrough since it allows a local treatment of infections, reducing and concentrating the dose of antimicrobial compounds, avoiding secondary effects, including the resistance generation and particularly because the combination with magnetic hyperthermia helps sensitizing resistant bacteria to the bactericidal effect of AS-48. Thus, this new formulation should be considered a promising tool in the antibacterial fight.

Rapid Assembly of Infection-Resistant Coatings: Screening and Identification of Antimicrobial Peptides Works in Cooperation with an Antifouling Background.

Bacterial adhesion and the succeeding biofilm formation onto surfaces are responsible for implant- and device-associated infections. Bifunctional coatings integrating both nonfouling components and antimicrobial peptides (AMPs) are a promising approach to develop potent antibiofilm coatings. However, the current approaches and chemistry for such coatings are time-consuming and dependent on substrates and involve a multistep process. Also, the information is limited on the influence of the coating structure or its components on the antibiofilm activity of such AMP-based coatings. Here, we report a new strategy to rapidly assemble a stable, potent, and substrate-independent AMP-based antibiofilm coating in a nonfouling background. The coating structure allowed for the screening of AMPs in a relevant nonfouling background to identify optimal peptide combinations that work in cooperation to generate potent antibiofilm activity. The structure of the coating was changed by altering the organization of the hydrophilic polymer chains within the coatings. The coatings were thoroughly characterized using various surface analytical techniques and correlated with the efficiency to prevent biofilm formation against diverse bacteria. The coating method that allowed the conjugation of AMPs without altering the steric protection ability of hydrophilic polymer structure results in a bifunctional surface coating with excellent antibiofilm activity. In contrast, the conjugation of AMPs directly to the hydrophilic polymer chains resulted in a surface with poor antibiofilm activity and increased adhesion of bacteria. Using this coating approach, we further established a new screening method and identified a set of potent surface-tethered AMPs with high activity. The success of this new peptide screening and coating method is demonstrated using a clinically relevant mouse infection model to prevent catheter-associated urinary tract infection (CAUTI).

Sulfated carboxymethylcellulose conjugated electrospun fibers as a growth factor presenting system for tissue engineering.

Inspired by the natural electrostatic interaction of cationic growth factors with anionic sulfated glycosaminoglycans in the extracellular matrix, we developed electrospun poly(hydroxybutyrate)/gelatin (PG) fibers conjugated with anionic sulfated carboxymethylcellulose (sCMC) to enable growth factor immobilization via electrostatic interaction for tissue engineering. The fibrous scaffold bound cationic molecules, was cytocompatible and exhibited a remarkable morphological and functional stability. Transforming growth factor-ß1 immobilized on the sCMC conjugated fibers was retained for at least 4 weeks with negligible release (3%). Immobilized fibroblast growth factor-2 and connective tissue growth factor were bioactive and induced proliferation and fibrogenic differentiation of infrapatellar fat pad derived mesenchymal stem cells respectively with efficiency similar to or better than free growth factors. Taken together, our studies demonstrate that sCMC conjugated PG fibers can immobilize and retain function of cationic growth factors and hence show potential for use in various tissue engineering applications.

The regenerative effect of different growth factors and platelet lysate on meniscus cells and mesenchymal stromal cells and proof of concept with a functionalized meniscus implant.

Meniscus regeneration could be enhanced by targeting meniscus cells and mesenchymal stromal cells (MSCs) with the right growth factors. Combining these growth factors with the Collagen Meniscus Implant (CMI®) could accelerate cell ingrowth and tissue formation in the implant and thereby improve clinical outcomes. Using a transwell migration assay and a micro-wound assay, the effect of insulin-like growth factor-1, platelet-derived growth factor (PDGF), vascular endothelial growth factor (VEGF), transforming growth factor beta 1 (TGF-ß1), fibroblast growth factor, and platelet lysate (PL) on migration and proliferation of meniscus cells and MSCs was assessed. The formation of extracellular matrix under influence of the above-mentioned growth factors was assessed after 28 days of culture of both MSCs and meniscus cells. As a proof of concept, the CMI® was functionalized with a VEGF binding peptide and coated with platelet-rich plasma (PRP) for clinical application. Our results demonstrate that PDGF, TGF-ß1, and PL stimulate migration, proliferation, and/or extracellular matrix production of meniscus cells and MSCs. Additionally, the CMI® was successfully functionalized with a VEGF binding peptide and PRP which increased migration of meniscus cell and MSC into the implant. This study demonstrates proof of concept of functionalizing the CMI® with growth factor binding peptides. A CMI® functionalized with the right growth factors holds great potential for meniscus replacement after partial meniscectomy.

Improving Hemocompatibility: How Can Smart Surfaces Direct Blood To Fight against Thrombi.

Nature utilizes endothelium as a blood interface that perfectly controls hemostasis, preventing the uncontrolled formation of thrombi. The management of positive and negative feedback that finely tunes thrombosis and fibrinolysis is essential for human life, especially for patients who undergo extracorporeal circulation (ECC) after a severe respiratory or cardiac failure. The exposure of blood to a surface different from healthy endothelium inevitably initiates coagulation, drastically increasing the mortality rate by thromboembolic complications. In the present study, an ultrathin antifouling fibrinolytic coating capable of disintegrating thrombi in a self-regulated manner is reported. The coating system is composed of a polymer brush layer that can prevent any unspecific interaction with blood. The brushes are functionalized with a tissue plasminogen activator (tPA) to establish localized fibrinolysis that solely and exclusively is active when it is required. This interactive switching between the dormant and active state is realized through an amplification mechanism that increases (positive feedback) or restores (negative feedback) the activity of tPA depending on whether a thrombus is detected and captured or not. Thus, only a low surface density of tPA is necessary to lyse real thrombi. Our work demonstrates the first report of a coating that self-regulates its fibrinolytic activity depending on the conditions of blood.

Covalently Immobilized Battacin Lipopeptide Gels with Activity against Bacterial Biofilms.

Novel antibiotic treatments are in increasing demand to tackle life-threatening infections from bacterial pathogens. In this study, we report the use of a potent battacin lipopeptide as an antimicrobial gel to inhibit planktonic and mature biofilms of S. aureus and P. aeruginosa. The antimicrobial gels were made by covalently linking the N-terminal cysteine containing lipopeptide (GZ3.163) onto the polyethylene glycol polymer matrix and initiating gelation using thiol-ene click chemistry. The gels were prepared both in methanol and in water and were characterised using rheology, Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). Antibacterial and antibiofilm analyses revealed that the gels prepared in methanol have better antibacterial and antibiofilm activity. Additionally, a minimum peptide content of 0.5 wt% (relative to polymer content) is required to successfully inhibit the planktonic bacterial growth and disperse mature biofilms of P. aeruginosa and S. aureus. The antibacterial activity of these lipopeptide gels is mediated by a contact kill mechanism of action. The gels are non-haemolytic against mouse red blood cells and are non-cytotoxic against human dermal fibroblasts. Findings from this study show that battacin lipopeptide gels have the potential to be developed as novel topical antibacterial agents to combat skin infections, particularly caused by S. aureus.

Polydopamine-assisted PDGF-BB immobilization on PLGA fibrous substrate enhances wound healing via regulating anti-inflammatory and cytokine secretion.

Platelet-derived growth factor-bb (PDGF-BB) is a potent chemokine and mitogen for fibroblasts, keratinocytes, and vascular endothelium in the injured area, believed to be effective in wound healing. However, the short half-life of PDGF-BB and its rapid release from the wound surface limited its efficacy in vivo and vitro. To evaluate the wound healing effects of dorsal skin in SD rats with polydopamine-assisted immobilized PDGF-BB on PLGA nanofibrous substrate. First, the effects of pDA-coating and PDGF-BB immobilization on the morphology, compositions, and hydrophilicity of substrates were evaluated in details. Second, the wound healing effect of pDA/PLGA/PDGF-BB substrate was assessed in the dorsal skin of SD rats. Last, the cytokine analysis by ELISA method was employed to evaluate the advantages of pDA/PLGA/PDGF-BB substrate on anti-inflammatory, angiogenesis, and cellular proliferation. This method significantly improved the immobilization amount and stability of PDGF-BB on the substrate (p<0.01), further improved the hydrophilicity of substrates (p<0.05). Furthermore, the wound closure process was much more accelerated in the pDA/PLGA/PDGF-BB group (p<0.05). H&E and CD31 staining informed that the wound treated by pDA/PLGA/PDGF-BB substrate showed a high degree of regeneration and angiogenesis. The cytokine analysis showed that pDA significantly reduced the high level of inflammatory cytokines such as TNF-α (p<0.05). And the immobilized PDGF-BB significantly elevated the level of TGF-ß and VEGF (p<0.05). The pDA/PLGA/PDGF-BB substrate showed great therapeutic effect on wound healing compared with other control groups via regulating anti-inflammatory, angiogenesis, and cellular proliferation. Absolutely, this report offered an available novel method for skin regeneration.

Metabolomic and Signaling Programs Induced by Immobilized versus Soluble IFN γ in Neural Stem Cells.

Neural stem cells (NSCs) provide a strategy to replace damaged neurons following traumatic central nervous system injuries. A major hurdle to translation of this therapy is that direct application of NSCs to CNS injury does not support sufficient neurogenesis due to lack of proper cues. To provide prolonged spatial cues to NSCs IFN-γ was immobilized to biomimetic hydrogel substrate to supply physical and biochemical signals to instruct the encapsulated NSCs to be neurogenic. However, the immobilization of factors, including IFN-γ, versus soluble delivery of the same factor, has been incompletely characterized especially with respect to activation of signaling and metabolism in cells over longer time points. In this study, protein and metabolite changes in NSCs induced by immobilized versus soluble IFN-γ at 7 days were evaluated. Soluble IFN-γ, refreshed daily over 7 days, elicited stronger responses in NSCs compared to immobilized IFN-γ, indicating that immobilization may not sustain signaling or has altered ligand/receptor interaction and integrity. However, both IFN-γ delivery types supported increased ßIII tubulin expression in parallel with canonical and noncanonical receptor-signaling compared to no IFN-γ. Global metabolomics and pathway analysis revealed that soluble and immobilized IFN-γ altered metabolic pathway activities including energy, lipid, and amino acid synthesis, with soluble IFN-γ having the greatest metabolic impact overall. Finally, soluble and immobilized IFN-γ support mitochondrial voltage-dependent anion channel (VDAC) expression that correlates to differentiated NSCs. This work utilizes new methods to evaluate cell responses to protein delivery and provides insight into mode of action that can be harnessed to improve regenerative medicine-based strategies.

Targeting the oral plaque microbiome with immobilized anti-biofilm peptides at tooth-restoration interfaces.

Recurrent caries, the development of carious lesions at the interface between the restorative material and the tooth structure, is highly prevalent and represents the primary cause for failure of dental restorations. Correspondingly, we exploited the self-assembly and strong antibiofilm activity of amphipathic antimicrobial peptides (AAMPs) to form novel coatings on dentin that aimed to prevent recurrent caries at susceptible cavosurface margins. AAMPs are alternative to traditional antimicrobial agents and antibiotics with the ability to target the complex and heterogeneous organization of microbial communities. Unlike approaches that have focused on using these AAMPs in aqueous solutions for a transient activity, here we assess the effects on microcosm biofilms of a long-acting AAMPs-based antibiofilm coating to protect the tooth-composite interface. Genomewise, we studied the impact of AAMPs coatings on the dental plaque microbial community. We found that non-native all D-amino acids AAMPs coatings induced a marked shift in the plaque community and selectively targeted three primary acidogenic colonizers, including the most common taxa around Class II composite restorations. Accordingly, we investigated the translational potential of our antibiofilm dentin using multiphoton pulsed near infra-red laser for deep bioimaging to assess the impact of AAMPs-coated dentin on plaque biofilms along dentin-composite interfaces. Multiphoton enabled us to record the antibiofilm potency of AAMPs-coated dentin on plaque biofilms throughout exaggeratedly failed interfaces. In conclusion, AAMPs-coatings on dentin showed selective and long-acting antibiofilm activity against three dominant acidogenic colonizers and potential to resist recurrent caries to promote and sustain the interfacial integrity of adhesive-based interfaces.

Mimicking the Endothelium: Dual Action Heparinized Nitric Oxide Releasing Surface.

The management of thrombosis and bacterial infection is critical to ensure the functionality of medical devices. While administration of anticoagulants is the current antithrombotic clinical practice, a variety of complications, such as uncontrolled hemorrhages or heparin-induced thrombocytopenia, can occur. Additionally, infection rates remain a costly and deadly complication associated with use of these medical devices. It has been hypothesized that if a synthetic surface could mimic the biochemical mechanisms of the endothelium of blood vessels, thrombosis could be reduced, anticoagulant use could be avoided, and infection could be prevented. Herein, the interfacial biochemical effects of the endothelium were mimicked by altering the surface of medical grade silicone rubber (SR). Surface modification was accomplished via heparin surface immobilization (Hep) and the inclusion of a nitric oxide (NO) donor into the SR polymeric matrix to achieve synergistic effects (Hep-NO-SR). An in vitro bacteria adhesion study revealed that Hep-NO-SR exhibited a 99.46 ± 0.17% reduction in viable bacteria adhesion compared to SR. An in vitro platelet study revealed Hep-NO-SR reduced platelet adhesion by 84.12 ± 6.19% compared to SR, while not generating a cytotoxic response against fibroblast cells. In a 4 h extracorporeal circuit model without systemic anticoagulation, all Hep-NO-SR samples were able to maintain baseline platelet count and device patency; whereas 66% of SR samples clotted within the first 2 h of study. Results indicate that Hep-NO-SR creates a more hemocompatible and antibacterial surface by mimicking two key biochemical functions of the native endothelium.

Immobilization of BMP-2, BMP-7 and alendronic acid on titanium surfaces: Adhesion, proliferation and differentiation of bone marrow-derived stem cells.

This study analyzed the influence of titanium (TiO2 ) surface modifications with two osteogenic proteins (BMP-2, BMP-7) and an anti-osteoclastic drug (alendronic acid [AA]) on sandblasted/acid-etched (SLA) and plain TiO2 (PT) on cell adhesion, proliferation and differentiation (alkaline phosphatase [AP] and osteocalcin [OC]) of bone-marrow derived stem cells (BMSCs) after 1, 3 and 7 days in-vitro. Initially, AA surfaces showed the highest cell number and surface coverage. At day 3 and 7, BMP and AA-modified surfaces exhibited a significantly enhanced cell growth. For proliferation, at days 3 and 7, an enhancement on BMP-2, BMP-7 and AA-surfaces was seen. At day 7, SLA also showed a higher proliferation when compared to PT. Initially, AP expression was elevated on SLA and AA surfaces. At days 3 and 7, a significant increased AP expression was seen for SLA, BMP-2, BMP-7 and AA discs. For OC, SLA and AA surfaces had the highest expression after 1 day whereas after 3 and 7 days a significant difference was recorded for SLA, BMP-2, BMP-7 and AA. In conclusion, a beneficial biological effect of a chemical immobilization method of BMP-2, BMP-7 and alendronate onto titanium surfaces on BMSCs was proven.

Neurogenic Niche Conversion Strategy Induces Migration and Functional Neuronal Differentiation of Neural Precursor Cells Following Brain Injury.

Glial scars formed after brain injuries provide permissive cues for endogenous neural precursor/stem cells (eNP/SCs) to undergo astrogenesis rather than neurogenesis. Following brain injury, eNP/SCs from the subventricular zone leave their niche, migrate to the injured cortex, and differentiate into reactive astrocytes that contribute to glial scar formation. In vivo neuronal reprogramming, directly converting non-neuronal cells such as reactive astrocytes or NG2 glia into neurons, has greatly improved brain injury repair strategies. However, reprogramming carries a high risk of future clinical applications such as tumorigenicity, involving virus. In this study, we constructed a neural matrix to alter the adverse niche at the injured cortex, enabling eNP/SCs to differentiate into functional neurons. We found that the neural matrix functioned as a "glial trap" that largely concentrated and limited reactive astrocytes to the core of the lesion area, thus altering the adverse niche. The eNP/SCs migrated toward the injured cortex and differentiated into functional neurons. In addition, regenerated neurites extended across the boundary of the injured cortex. Mice treated with the neural matrix demonstrated significant behavioral recovery. For the first time, we induced eNP/SC-derived functional neurons in the cortex after brain injury without the use of viruses, microRNAs, or small molecules. Our novel strategy of applying this "glial trap" to obtain functional neurons in the injured cortex may provide a safer and more natural therapeutic alternative to reprogramming in future clinical applications.

Immobilized RGD concentration and proteolytic degradation synergistically enhance vascular sprouting within hydrogel scaffolds of varying modulus.

Insufficient vascularization limits the volume and complexity of engineered tissue. The formation of new blood vessels (neovascularization) is regulated by a complex interplay of cellular interactions with biochemical and biophysical signals provided by the extracellular matrix (ECM) necessitating the development of biomaterial approaches that enable systematic modulation in matrix properties. To address this need poly(ethylene) glycol-based hydrogel scaffolds were engineered with a range of decoupled and combined variations in integrin-binding peptide (RGD) ligand concentration, elastic modulus and proteolytic degradation rate using free-radical polymerization chemistry. The modularity of this system enabled a full factorial experimental design to simultaneously investigate the individual and interaction effects of these matrix cues on vascular sprout formation in 3 D culture. Enhancements in scaffold proteolytic degradation rate promoted significant increases in vascular sprout length and junction number while increases in modulus significantly and negatively impacted vascular sprouting. We also observed that individual variations in immobilized RGD concentration did not significantly impact 3 D vascular sprouting. Our findings revealed a previously unidentified and optimized combination whereby increases in both immobilized RGD concentration and proteolytic degradation rate resulted in significant and synergistic enhancements in 3 D vascular spouting. The above-mentioned findings would have been challenging to uncover using one-factor-at-time experimental analyses.

Micropatterned nanolayers immobilized with nerve growth factor for neurite formation of PC12 cells.

BACKGROUND: Nerve regeneration is important for the treatment of degenerative diseases and neurons injured by accidents. Nerve growth factor (NGF) has been previously conjugated to materials for promotion of neurogenesis. MATERIALS AND METHODS: Photoreactive gelatin was prepared by chemical coupling of gelatin with azidobenzoic acid (P-gel), and then NGF was immobilized on substrates in the presence or absence of micropatterned photomasks. UV irradiation induced crosslinking reactions of P-gel with itself, NGF, and the plate for immobilization. RESULTS: By adjustment of the P-gel concentration, the nanometer-order height of micropatterns was controlled. NGF was quantitatively immobilized with increasing amounts of P-gel. Immobilized NGF induced neurite outgrowth of PC12 cells, a cell line derived from a pheochromocytoma of the rat adrenal medulla, at the same level as soluble NGF. The immobilized NGF showed higher thermal stability than the soluble NGF and was repeatedly used without loss of biological activity. The 3D structure (height of the formed micropattern) regulated the behavior of neurite guidance. As a result, the orientation of neurites was regulated by the stripe pattern width. CONCLUSION: The micropattern-immobilized NGF nanolayer biochemically and topologically regulated neurite formation.

Synthetic presentation of noncanonical Wnt5a motif promotes mechanosensing-dependent differentiation of stem cells and regeneration.

Noncanonical Wnt signaling in stem cells is essential to numerous developmental events. However, no prior studies have capitalized on the osteoinductive potential of noncanonical Wnt ligands to functionalize biomaterials in enhancing the osteogenesis and associated skeleton formation. Here, we investigated the efficacy of the functionalization of biomaterials with a synthetic Wnt5a mimetic ligand (Foxy5 peptide) to promote the mechanosensing and osteogenesis of human mesenchymal stem cells by activating noncanonical Wnt signaling. Our findings showed that the immobilized Wnt5a mimetic ligand activated noncanonical Wnt signaling via the up-regulation of Disheveled 2 and downstream RhoA-ROCK signaling, leading to enhanced intracellular calcium level, F-actin stability, actomyosin contractility, and cell adhesion structure development. This enhanced mechanotransduction in stem cells promoted the in vitro osteogenic lineage commitment and the in vivo healing of rat calvarial defects. Our work provides valuable guidance for the developmentally inspired design of biomaterials for a wide array of therapeutic applications.