Establishing legal threshold of 18-years based on the assessment of mandibular molars using three different methods - An observational study.

BACKGROUND: The study evaluates the feasibility of employing the radiographic visibility of the root pulp and periodontal ligament in mandibular molars for age estimation, particularly focusing on the 18 years of age threshold. This study additionally investigates the potential of root canal width reduction in mandibular molars, as a reliable method for forensic age estimation in living individuals. MATERIALS AND METHODS: A cross-sectional study was conducted to assess the radiographic visibility of the root pulp (RPV) and the root canal width (RCW) of mandibular first, second, and third molars along with the radiographic visibility of the periodontal ligament (PLV) of mandibular third molars, in a sample of 403 individuals aged 16-25 years (220 males and 183 females). Data regarding age for different stages of RPV and PLV and various types of RCW were recorded and observed for sex-based differences. Results obtained were tabulated and descriptive statistics were applied to summarise the findings. RESULTS: Individuals over 18 years old were classified with higher accuracy using stage 3 of the RPV scoring system in all mandibular molars (first, second, and third) compared to stage 2, which was also effective for the second and third molars. This result held regardless of sex and side examined. Additionally, root canal width (RCW) assessment demonstrated that individuals with RCW types A, B, and C were more likely to be under 18 years old in both sexes. Conversely, individuals with RCW type U on the right side for males and the left side for females exhibited a higher likelihood of being above 18 years old. CONCLUSION: The study suggests that the assessment of mandibular molars could potentially serve as an auxiliary tool in age estimation methods, particularly for approximating individuals around the 18 years of age threshold. Further investigation is warranted to explore the potential application of root canal width measurements in forensic age estimation.

Anatomical characteristics of different tooth groups. Effect on in-office bleaching treatment

AIM: The objective of the present study was to investigate the association between the anatomical characteristics of different tooth groups and the diffusion and bleaching effect of hydrogen peroxide (H2O2). MATERIALS AND METHODS: Computed tomography (CT) images from five patients were used to assess the hard tissue thickness and pulp volume (PV) of four tooth groups: lower (mandibular) incisors (LI), upper (maxillary) incisors (UI), canines (C), and premolars (PM). Additionally, 80 bovine tooth disks were divided into four groups (n = 20) to match the thickness of each tooth group studied. All the specimens were exposed to a 35% H2O2 bleaching gel, with 50 µL applied for 45 min during the first, second, and third sessions. Diffusion was evaluated using the peroxidase enzyme method. Color change analyses (∆E, ∆E00, and ∆WID) were performed after the three application sessions and 7 days after the bleaching treatment using a spectrophotometer. RESULTS: The PM group showed greater thickness and PV, followed by the C, UI, and LI groups (P 0.001). The LI group had six times greater H2O2 diffusion compared with the PM group (P 0.001), while the PM group exhibited a PV nine times larger than the LI group. Furthermore, the LI and UI groups achieved color saturation with one fewer session than the C and PM groups. CONCLUSIONS: Specific tooth groups have anatomical characteristics that interfere with bleaching treatment in terms of the diffusion and whitening effect of H2O2. Furthermore, the diffusion capacity of H2O2 was inversely proportional to the thickness of the tooth groups.

Accuracy evaluation of dental CBCT and scanned model registration method based on pulp horn mapping surface: an in vitro proof-of-concept.

BACKGROUND AND AIM: 3D fusion model of cone-beam computed tomography (CBCT) and oral scanned data can be used for the accurate design of root canal access and guide plates in root canal therapy (RCT). However, the pose accuracy of the dental pulp and crown in data registration has not been investigated, which affects the precise implementation of clinical planning goals. We aimed to establish a novel registration method based on pulp horn mapping surface (PHMSR), to evaluate the accuracy of PHMSR versus traditional methods for crown-pulp registration of CBCT and oral scan data. MATERIALS AND METHODS: This vitro study collected 8 groups of oral scanned and CBCT data in which the left mandibular teeth were not missing, No. 35 and No. 36 teeth were selected as the target teeth. The CBCT and scanned model were processed to generate equivalent point clouds. For the PHMSR method, the similarity between the feature directions of the pulp horn and the surface normal vectors of the crown were used to determine the mapping points in the CBCT point cloud that have a great influence on the pulp pose. The small surface with adjustable parameters is reconstructed near the mapping point of the crown, and the new matching point pairs between the point and the mapping surface are searched. The sparse iterative closest point (ICP) algorithm is used to solve the new matching point pairs. Then, in the C + + programming environment with a point cloud library (PCL), the PHMSR, the traditional sparse ICP, ICP, and coherent point drift (CPD) algorithms are used to register the point clouds under two different initial deviations. The root square mean error (RSME) of the crown, crown-pulp orientation deviation (CPOD), and position deviation (CPPD) were calculated to evaluate the registration accuracy. The significance between the groups was tested by a two-tailed paired t-test (p < 0.05). RESULTS: The crown RSME values of the sparse ICP method (0.257), the ICP method (0.217), and the CPD method (0.209) were not significantly different from the PHMSR method (0.250). The CPOD and CPPD values of the sparse ICP method (4.089 and 0.133), the ICP method (1.787 and 0.700), and the CPD method (1.665 and 0.718) than for the PHMSR method, which suggests that the accuracy of crown-pulp registration is higher with the PHMSR method. CONCLUSION: Compared with the traditional method, the PHMSR method has a smaller crown-pulp registration accuracy and a clinically acceptable deviation range, these results support the use of PHMSR method instead of the traditional method for clinical planning of root canal therapy.

Optimal outcomes of pulpotomy in young patients: Long-term prospects for permanent molars with signs and symptoms indicative of irreversible pulpitis.

OBJECTIVES: Limited literature addresses the long-term success of complete pulpotomy in permanent molars with signs of irreversible pulpitis in young patients. The aim of this observational study was to prospectively evaluate the long-term outcomes of complete pulpotomy using mineral trioxide aggregate (MTA) over an average period exceeding 11 years. METHODS: Out of 27 molars displaying signs suggestive of irreversible pulpitis which underwent MTA pulpotomy, 24 molars were followed-up for a mean duration of 11.0 ± 2.2 years (range 8.2 to 14.8 years). Clinical and radiographic assessments were periodically conducted, tailored to each patient's specific circumstances. Treatment failure criteria included clinical signs and symptoms and radiographic evidence suggesting a lack of pulpal or periapical healing. RESULTS: 83 % of molars had signs and symptoms of symptomatic irreversible pulpitis, with 83 % displaying apical periodontitis. Clinically and radiographically, all pulpotomies (100 %) were considered successful. A hard tissue barrier was observed in 71 % of teeth, and continued root maturation was evident in all molars with open apices. Complete pulp canal obliteration (PCO) was present in 21 % of the molars. All radiographic apical radiolucencies completely resolved. CONCLUSIONS: This study demonstrates a 100 % success rate over an average 11-year follow-up for complete pulpotomy in managing permanent molars with signs and symptoms of irreversible pulpitis in young patients. It offers evidence for its long-term efficacy in promoting healing of pulp and periapical tissues. CLINICAL SIGNIFICANCE: This study showed high long-term success for complete pulpotomy in young permanent molars with irreversible pulpitis, with clinical and radiographic success over 11 years. Despite initial symptoms of pulpitis and apical periodontitis, the treatment resulted in tissue healing, root maturation, and resolution of periapical radiolucencies, suggesting it as an alternative to root canal therapy.

How teeth can be used to estimate sexual dimorphism? A scoping review.

INTRODUCTION: Teeth are biological structures with a high degree of hardness, density, calcification, and capacity to adapt to extrinsic factors at physical, biological, and physiological levels. Subsequently, they resist for a longer period in deteriorating environmental conditions. With dental analysis, it is possible to acquire biographical data about a person. The aim of this scoping review was to identify publications using human teeth tissues to estimate sexual dimorphism. METHODS: The scoping review was carried out in the following databases: Jstor, Scielo, Science Direct, PubMed, and Scopus, using ten search strategies in English and guaranteeing completeness and reproducibility of the phases stipulated in the PRISMA guide. RESULTS: 143 studies on sexual dimorphism based on dental tissue traits were included, of which 40.6% (n = 58) were done in Asia and 27.2% (n = 39) in America. 80% of the studies (equivalent to 114 articles) focused their observations and measurements on the dental crown; 4.2% in enamel, dentin, and pulp together; 3.5% in dental pulp; 2.1% in the entire tooth; 2.8% in enamel, root, and the enamel-cementum junction, and only 0.7% in dentin and pulp. In addition, 92.3% of the studies used metric methods, while only 4.9% and 2.8% used biochemical and non-metric method respectively. CONCLUSION: For sexual dimorphism establishment, enamel has been the most analyzed dental tissue in permanent canines and molars mainly. Likewise, the most widely and accurately used methods for this purpose are the metrics, with the odontometry as the most implemented (intraoral or by using dental plaster models, digital scanning or software) with prediction percentages ranging from 51% to 95.9%. In contrast to biochemical methods, that can achieve the highest precision (up to 100%), the non-metric methods, to a less extent, reported prediction percentages of 58%.

Adolescents and Children Age Estimation Using Machine Learning Based on Pulp and Tooth Volumes on CBCT Images.

OBJECTIVES: To estimate adolescents and children age using stepwise regression and machine learning methods based on the pulp and tooth volumes of the left maxillary central incisor and cuspid on cone beam computed tomography (CBCT) images, and to compare and analyze the estimation results. METHODS: A total of 498 Shanghai Han adolescents and children CBCT images of the oral and maxillofacial regions were collected. The pulp and tooth volumes of the left maxillary central incisor and cuspid were measured and calculated. Three machine learning algorithms (K-nearest neighbor, ridge regression, and decision tree) and stepwise regression were used to establish four age estimation models. The coefficient of determination, mean error, root mean square error, mean square error and mean absolute error were computed and compared. A correlation heatmap was drawn to visualize and the monotonic relationship between parameters was visually analyzed. RESULTS: The K-nearest neighbor model (R2=0.779) and the ridge regression model (R2=0.729) outperformed stepwise regression (R2=0.617), while the decision tree model (R2=0.494) showed poor fitting. The correlation heatmap demonstrated a monotonically negative correlation between age and the parameters including pulp volume, the ratio of pulp volume to hard tissue volume, and the ratio of pulp volume to tooth volume. CONCLUSIONS: Pulp volume and pulp volume proportion are closely related to age. The application of CBCT-based machine learning methods can provide more accurate age estimation results, which lays a foundation for further CBCT-based deep learning dental age estimation research.

Determining Whether an Individual is 18 Years or Older Based on the Third Molar Root Pulp Visibility in East China.

OBJECTIVES: To investigate the age-related changes of the mandibular third molar root pulp visibility in individuals in East China, and to explore the feasibility of applying this method to determine whether an individual is 18 years or older. METHODS: A total of 1 280 oral panoramic images were collected from the 15-30 years old East China population, and the mandibular third molar root pulp visibility in all oral panoramic images was evaluated using OLZE 0-3 four-stage method, and the age distribution of the samples at each stage was analyzed using descriptive statistics. RESULTS: Stages 0, 1, 2 and 3 first appeared in 16.88, 19.18, 21.91 and 25.44 years for males and in 17.47, 20.91, 22.01 and 26.01 years for females. In all samples, individuals at stages 1 to 3 were over 18 years old. CONCLUSIONS: It is feasible to determine whether an individual in East China is 18 years or older based on the mandibular third molar root pulp visibility on oral panoramic images.

Progress of Artificial Intelligence-Driven Solutions for Automated Segmentation of Dental Pulp Space on Cone-Beam Computed Tomography Images. A Systematic Review.

INTRODUCTION: Automated segmentation of 3-dimensional pulp space on cone-beam computed tomography images presents a significant opportunity for enhancing diagnosis, treatment planning, and clinical education in endodontics. The aim of this systematic review was to investigate the performance of artificial intelligence-driven automated pulp space segmentation on cone-beam computed tomography images. METHODS: A comprehensive electronic search was performed using PubMed, Web of Science, and Cochrane databases, up until February 2024. Two independent reviewers participated in the selection of studies, data extraction, and evaluation of the included studies. Any disagreements were resolved by a third reviewer. The Quality Assessment of Diagnostic Accuracy Studies-2 tool was used to assess the risk of bias. RESULTS: Thirteen studies that met the eligibility criteria were included. Most studies demonstrated high accuracy in their respective segmentation methods, although there was some variation across different structures (pulp chamber, root canal) and tooth types (single-rooted, multirooted). Automated segmentation showed slightly superior performance for segmenting the pulp chamber compared to the root canal and single-rooted teeth compared to multi-rooted ones. Furthermore, the second mesiobuccal (MB2) canalsegmentation also demonstrated high performance. In terms of time efficiency, the minimum time required for segmentation was 13 seconds. CONCLUSION: Artificial intelligence-driven models demonstrated outstanding performance in pulp space segmentation. Nevertheless, these findings warrant careful interpretation, and their generalizability is limited due to the potential risk and low evidence level arising from inadequately detailed methodologies and inconsistent assessment techniques. In addition, there is room for further improvement, specifically for root canal segmentation and testing of artificial intelligence performance in artifact-induced images.

Pulp Survival of Cracked Teeth with Reversible Pulpitis after Orthodontic Banding and Coronal Coverage - A Prospective Cohort Study with One Year Follow Up.

INTRODUCTION: The aim of this prospective study was to investigate the 1-year pulp survival of cracked teeth with reversible pulpitis managed with initial stabilization using orthodontic bands, followed by coronal coverage restorations. METHODS: One-hundred-and-twenty-five patients with a cracked tooth with reversible pulpitis each were recruited. Preoperative patient and tooth data were collected. After definitive pulp diagnoses were determined following an interim period of orthodontic banding, coronal coverage restorations were placed. Cox and logistic regression analyses were used to assess possible prognostic factors and to correlate initial time to pulp stabilization while in orthodontic bands with eventual outcome. Pulp survival was determined using both clinical and radiographic findings. RESULTS: One-hundred-and-six cracked teeth were followed up at 1 year. Pulp survival based on clinical and radiographic findings was found in 81 teeth (76.4%). Out of 25 failures, 11 (44%) required root canal treatment (RCT) in the orthodontic band stage and 10 (40%) required RCT during the process of or after coronal coverage restorations. Four teeth (16%) had incidental findings of periapical radiolucencies at the 1-year review without clinical symptoms. Teeth requiring RCT were found to have required longer periods in orthodontic bands prior to a definitive pulp diagnosis (P < .05). CONCLUSION: A step-by-step approach by using orthodontic banding to monitor pulp status may reduce the incidence of RCT required through definitive coronal coverage restorations for cracked teeth with reversible pulpitis.

Machine learning assisted 5-part tooth segmentation method for CBCT-based dental age estimation in adults.

BACKGROUND: The utilization of segmentation method using volumetric data in adults dental age estimation (DAE) from cone-beam computed tomography (CBCT) was further expanded by using current 5-Part Tooth Segmentation (SG) method. Additionally, supervised machine learning modelling -namely support vector regression (SVR) with linear and polynomial kernel, and regression tree - was tested and compared with the multiple linear regression model. MATERIAL AND METHODS: CBCT scans from 99 patients aged between 20 to 59.99 was collected. Eighty eligible teeth including maxillary canine, lateral incisor, and central incisor were used in this study. Enamel to dentine volume ratio, pulp to dentine volume ratio, lower tooth volume ratio, and sex was utilized as independent variable to predict chronological age. RESULTS: No multicollinearity was detected in the models. The best performing model comes from maxillary lateral incisor using SVR with polynomial kernel ( = 0.73). The lowest error rate achieved by the model was given also by maxillary lateral incisor, with 4.86 years of mean average error and 6.05 years of root means squared error. However, demands a complex approach to segment the enamel volume in the crown section and a lengthier labour time of 45 minutes per tooth.

Age estimation by volumetric analysis of teeth using cone beam computed tomography.

OBJECTIVES: To evaluate the feasibility of using the pulp volume (Pv) to total volume (Tv) ratio (Pv:Tv), obtained from cone beam computed tomography (CBCT) scans of single-rooted teeth, for age estimation in a Brazilian population sample. METHODS: After obtaining approval from the ethics committee, the study commenced by applying inclusion criteria to screen CBCT scans, resulting in a probability-based sample of participants aged 18 years and older (ranging from 18 to 82 years, with a mean age of 46.44 years). A total of 517 single-rooted teeth, including maxillary central incisors (CI), mandibular canines (C), and mandibular first premolars (FP), were chosen based on excellent agreement values (> 0.9). Pv and Tv measurements were conducted using semi-automatic segmentation with ITK-SNAP 3.8 software. Statistical analysis was performed using Jamovi software, with a significance level set at 5% (α = 0.05). RESULTS: A strong negative correlation (r > -0.7) was observed between chronological age and the Pv:Tv ratio across all examined teeth. However, when conducting regression analysis with Pv:Tv data and chronological age as the independent variable, only the mandibular FP teeth exhibited a normal distribution. The resulting linear model demonstrated moderate predictive value (approximately 64%) in explaining the variance in chronological age, but caution should be exercised when interpreting these findings. CONCLUSIONS: The method of measuring individual tooth volume using CBCT to estimate chronological age via Pv:Tv has been demonstrated as effective and reproducible within the Brazilian population sample.

Exploring approaches to pulp vitality assessment: A scoping review of nontraditional methods.

INTRODUCTION: Diagnostic procedures for pulp vitality assessment are a crucial aspect of routine dental practice. This review aims to provide a comprehensive overview of nontraditional techniques and methodologies for assessing pulp vitality, specifically exploring promising approaches that are currently not used in dental practice. METHODS: The study protocol was registered a priori (https://osf.io/3m97z/). An extensive electronic search was conducted across multiple databases, including MEDLINE via PubMed, Scopus, Web of Science, and Embase. Inclusion criteria were guided by the research question based on the PCC model as follows: "What are the potential nontraditional techniques (Concept) for assessing pulp vitality (Population) in the field of endodontics or clinical practice (Context)?" Studies were included that explored possible approaches to pulp vitality assessment, utilizing a range of techniques, whilst any studies using traditional pulp tests (cold, heat, and electric stimulation) or well-known methods (pulse oximetry and laser Doppler flowmetry) were excluded. Reviewers independently screened articles and extracted data. A patent search was also performed. RESULTS: Of 3062 studies, 65 were included that described nontraditional approaches for assessing pulp vitality. These included a range of optical diagnostic methods, ultrasound Doppler flowmetry (UDF), magnetic resonance imaging (MRI), terahertz imaging, tooth temperature measurements, as well as invasive methodologies, including 133xenon washout, radioisotope-labelled tracers, hydrogen gas desaturation, intravital microscopy and fluorescent microspheres isotope clearance. The patent search included artificial intelligence and biomarkers methods. CONCLUSIONS: This review provides details for potential innovative tests that may directly describe pulp vitality. Importantly, these methods range from clinically impractical through to promising methods that may transform clinical practice. Several nontraditional techniques have the potential to enhance diagnostic accuracy and could provide valuable insights into the assessment of pulp vitality in challenging clinical scenarios.

Assessment of dental pulp response to carries via MR T2mapping and histological analysis.

OBJECTIVES: The aim of our study was to assess the correlation between T2 relaxation times and their variability with the histopathological results of the same teeth in relation to caries progression. MATERIALS AND METHODS: 52 extracted permanent premolars were included in the study. Prior to extractions, patients underwent magnetic resonance imaging (MRI) scanning and teeth were evaluated using ICDAS classification. Pulps of extracted teeth were histologically analysed. RESULTS: MRI T2 relaxation times (ms) were 111,9 ± 11.2 for ICDAS 0, 132.3 ± 18.5* for ICDAS 1, 124.6 ± 14.8 for ICDAS 2 and 112. 6 ± 18.2 for ICDAS 3 group (p = 0,013). A positive correlation was observed between MRI T2 relaxation times and macrophage and T lymphocyte density in healthy teeth. There was a positive correlation between vascular density and T2 relaxation times of dental pulp in teeth with ICDAS score 1. A negative correlation was found between T2 relaxation times and macrophage density. There was a positive correlation between T2 relaxation time variability and macrophage and T lymphocyte density in teeth with ICDAS score 2. In teeth with ICDAS score 3, a positive correlation between T2 relaxation times and T2 relaxation time variability and lymphocyte B density was found. CONCLUSION: The results of our study confirm the applicability of MRI in evaluation of the true condition of the pulp tissue. CLINICAL RELEVANCE: With the high correlation to histological validation, MRI method serves as a promising imaging implement in the field of general dentistry and endodontics.

Correlation between pulp sensibility and magnetic resonance signal intensity following regenerative endodontic procedures in mature necrotic teeth- a retrospective cohort study.

BACKGROUND: With increasing studies being published on regenerative endodontic procedures (REPs) as a treatment modality for mature necrotic teeth, the assessment of outcomes following regenerative endodontic procedures has become more challenging and the demand for a better understanding of the regenerated tissues following this treatment is rising. The study aimed to correlate cold, electric pulp testing (EPT), and magnetic resonance imaging (MRI) signal intensity (SI) in mature necrotic teeth treated with regenerative endodontic procedures. METHODOLOGY: This retrospective cohort study included eighteen adult patients who experienced tooth necrosis in mature maxillary anterior teeth recruited from the outpatient clinic, Conservative Dentistry Department, Faculty of Dentistry, Alexandria University, Alexandria, Egypt from July 2017 until December 2018 with 12 months of follow-up. regenerative endodontic procedures via blood clot were performed. The canals were instrumented by ProTaper Next (PTN) files until final sizes X3 or X5. Biodentine was used as cervical plug material. Pre and post-operative clinical follow-up was done where the patients' responses to cold and electric pulp testing were given a scoring system and were compared to the normal contralateral tooth. Pre and post-operative magnetic resonance imaging signal intensity of both the involved tooth and its contralateral at the middle and the apical thirds of the root canals were assessed after 3, 6, and 12 months. Data was analyzed using the ANOVA, Friedman and Bonferroni tests. Significance was set at a p-value < 0.05. RESULTS: All 18 teeth scored a baseline score of "2" for cold and electric pulp testing. There was a significant difference between scores of the cold test at baseline and 12-month follow-up (p < 0.001). There was a significant difference between scores of the electric pulp testing of baseline and 12-month follow-up (p < 0.001). There was a moderately significant indirect (inverse) correlation between magnetic resonance imaging signal intensity and cold test in both the middle and apical thirds at 12 months. No significant correlations were detected between magnetic resonance imaging signal intensity and electric pulp testingat any of the time intervals (p > 0.05). CONCLUSION: Magnetic resonance imaging is a successful non-invasive method to assess outcomes of regenerative endodontic procedures and correlating it with another reliable method of assessing pulpal responses, cold test, could validate these outcomes. CLINICAL TRIAL REGISTRATION: The study was registered with ClinicalTrials.gov (ID: NCT03804450).

A comparison of estimated age based on pulp volume from cone beam computed tomography (CT) images and panoramic radiography data with chronological age.

This retrospective study was conducted to evaluate different methods for dental age estimation in children and to examine the feasibility of using cone beam computed tomography (CBCT) data for age estimation. A total of 200 radiographic records (both digital panoramic radiographs and CBCTs) were acquired from 100 children aged 9 to 16 years, all taken on the same dates. Radiographic data was acquired from archived records and included both panoramic radiography and CBCT data belonging to the same individual. CBCT was used when panoramic radiographic data was insufficient. The pulp volume and pulp/tooth volume ratio of the left first molar teeth in the mandible were calculated from the CBCT data using MIMICS software. In addition, age was estimated by the Demirjian and Willems methods from data obtained from panoramic radiography images. Statistical analyses and linear regression analysis were performed as necessary. There was a statistically significant difference between the mean difference between the Demirjian method and chronological age, and between the Willems method and chronological age (p < 0.001). Statistically significance was achieved in a linear regression model created from pulp volume (R2 = 0.098) and pulp/tooth volume ratio (R2 = 0.395) data for the estimated dental age analysis (p < 0.001) and a negative correlation was observed with chronological age. When compared estimated dental age from CBCT data with chronological age, the pulp/tooth volume ratio method yielded results closer to chronological age than using only pulp volume data. When considering both panoramic radiographic age estimation methods and age estimation methods using CBCT data, we found that the results obtained with the Willems method, a panoramic radiographic age estimation technique, provided the closest results to the chronological age. More contributions should be made to the literature regarding the feasibility of age estimation using pulp and tooth volume as an alternative method.

A potential novel technique for measurement of pulp volume on periapical radiography: A pilot study.

Pulp volume can be assessed during dental treatment. Three-dimensional imaging techniques are not routinely used for this purpose because of high radiation doses. This study aimed to develop a novel method to measure pulp volume using periapical radiography. In this study, cone-beam computed tomography (CBCT) was used as a reference method. Periapical radiography and CBCTs obtained from the same patients (n = 32) were recorded. Pulp volume was determined by observing the density differences between the pulp and peripheral structures using ImageJ. A method of graph and volume calculation was developed for each tooth. The Shapiro-Wilk test and Mann-Whitney U test were used to show normality and non-normal distributions. The Bland-Altman plot was used to show the scattering of the mean versus difference values of the measurements of the two methods used to calculate the pulp volume. Normality was evaluated using the Shapiro-Wilk test. CBCT measurements are normally distributed (p = 0.307), while ImageJ is not normally distributed (p = 0.027). Therefore, the mean difference between the two groups was analyzed using the nonparametric Mann-Whitney U test. There was a statistically significant difference between the CBCT and ImageJ measurements (p = 0.01). According to Spearman's correlation analysis, the results obtained from the novel method were moderately correlated with those obtained from the reference method (r = 0.444). The results of this study indicated that a novel method-based Java software can be used to calculate pulp volume using low-dose radiation containing periapical radiography.

[Comparison of the impact of orthodontic treatment on pulp volume in adolescents and adults].

Objective: To compare the impact of orthodontic treatment on pulp volume in adolescents and adults. Methods: Cone-beam CT data of 62 patients undergoing orthodontic treatment at the Department of Orthodontics, Stomatological Hospital of Chongqing Medical University, from January 2019 to March 2022 were collected. Patients were divided into two age groups (31 patients in each group): adolescent group (aged 13-17, 17 males and 14 females) and adult group (aged 21-25, 12 males and 19 females). Pre-and post-treatment reconstructions of the pulp and dental tissues of upper first molars (UM1) and lower central incisors (L1) were performed. Measurements included pulp volume for UM1 (UM1 P) and L1 (L1 P), pulp chamber volume (UM1 PC) and root canal volume (UM1 RC) for UM1, root length for L1 (L1 RL), and mesiobuccal root length for UM1 (UM1 RL), as well as chamber heights at specific landmarks [the lengths from the central fossa fusion site to the roof of the pulp chamber (H1), the floor of the pulp chamber (H2), the nearest point of root divergence as well as crown-root bifurcation (H3), the farthest point of root divergence (H4), and the pulp chamber height (H5)] in UM1. Changes in these indices were calculated and analyzed using paired and independent sample t-tests for within-group and between-group differences, respectively. Pearson correlation was used to assess potential associations among H5, root length, and pulp volume changes. Results: Before and after orthodontic treatment, no significant difference was observed in the adult group for L1 P (t=-0.03, P=0.975), while significant differences were noted for UM1 P, UM1 PC, and UM1 RC (t=9.98, P<0.001; t=9.04, P<0.001; t=6.69, P<0.001). In the adolescent group, significant differences were found for both L1 P and UM1 P (t=2.25, P=0.029; t=6.30, P<0.001). After orthodontic treatment, the absolute value changes of UM1 P, UM1 PC, and L1 P in the adolescent group were (19.75±9.58), (15.07±7.65) and (1.89±6.29) mm3, respectively, and in the adult group were (13.33±9.41), (9.16±7.05) and (0.02±4.66) mm3, respectively (t=3.77, P<0.001; t=4.48, P<0.001; t=2.34, P=0.048). There was no significant absolute difference in the amount of UM1 RC between the two groups after orthodontic treatment (t=0.86, P=0.391). Before and after orthodontic treatment, the absolute value changes of L1 RL, H1 and H5 in the adolescent group were (0.54±0.41), (0.38±0.27) and (0.71±0.33) mm, respectively, and the absolute value changes in the adult group were (0.78±0.62), (0.26±0.20) and (0.57±0.28) mm, respectively (t=-2.43, P=0.017; t=2.96, P=0.004; t=2.57, P=0.011). Whereas no significant differences were observed for UM1 RL, H2, H3, and H4 (t=-0.85, P=0.400; t=0.43, P=0.669; t=-0.50, P=0.619; t=1.46, P=0.148). Additionally, significant correlations were found between changes in H5 and UM1 RL with UM1 P (r=0.35, P<0.001; r=0.19, P=0.030), but not between Changes in L1 RL and L1 P (r=0.11, P>0.05). Conclusions: The effect of orthodontic treatment on pulp volume in adolescents and adults were different.

Age estimation in adults by canine teeth: a systematic review of the Cameriere method with meta-analysis on the reliability of the pulp/tooth area ratio.

The age estimation of an adult using methods accessible to the forensic routine is a goal pursued by forensic experts. Cameriere, Ferrante and Cingolani (2004) proposed the use of the pulp/tooth area ratio of canine teeth as a promising variable, but its reliability has shown conflicting results in the scientific literature. This article aimed to carry out a systematic review with meta-analysis to verify whether the pulp/tooth area ratio of canine teeth includes a variable that can be used alone to estimate dental age in adults. A systematic search was carried out in six databases using keywords related to the theme in Portuguese, English, and Spanish. The study selection process followed pre-established eligibility criteria. Assessments were carried out regarding risk of bias and publication bias of selected studies, and meta-analysis was carried out considering Pearson's correlation coefficient between pulp/tooth area ratio and chronological age as effect measure. Most selected studies showed low risk of bias; no publication bias was found when all studies were considered, and potential publication bias was found when outliers were removed. Despite the high heterogeneity among studies and the need for more research, it could be observed that the pulp/tooth area ratio has strong negative correlation with chronological age, and the pulp/tooth area ratio could be derived from both periapical radiographs and orthopantomographs. Therefore, it is suggested that there is scientific evidence that the pulp/tooth area ratio obtained from canine teeth is reliable for dental age estimation in adults.

Evaluation of radiographic visibility of root pulp in mandibular second molars using cone beam computed tomography images for age estimation.

The purpose of this study is to estimate chronological age and determine whether individuals were aged under or over 18 years using root pulp visibility (RPV) in cone-beam computed tomography (CBCT) images. The study included CBCT images of 699 individuals aged between 15 and 75 years. One thousand twenty-three mandibular second molar (2M) teeth were evaluated using Olze's RPV method in four stages. Descriptive statistics of the stages and the relationship between the stages and the chronological age were assessed. The distribution of the stages was analyzed according to the 18-year age threshold. There was a positive correlation between RPV stages and chronological ages in both sexes. For females and males, the mean ages of stage 0, stage 1, and stage 2, for females and males, were found as 27.21, 28.93, and 33.68 years, and 37.69, 40.9, and 44.88 years, respectively. Stage 0 and stage 1 were found both in individuals aged under and over 18 years, and stage 2 and stage 3 were not observed in individuals aged under 18 years. The presence of stage 2 and stage 3 may be an indication that an individual is aged over 18 years according to Olze's RPV age estimation method. For more reliable results, 2M teeth should be examined bilaterally in forensic science.

Early diagnosis of aortic calcification through dental X-ray examination for dental pulp stones.

Vascular calcification, an ectopic calcification exacerbated by aging and renal dysfunction, is closely associated with cardiovascular disease. However, early detection indicators are limited. This study focused on dental pulp stones, ectopic calcifications found in oral tissues that are easily identifiable on dental radiographs. Our investigation explored the frequency and timing of these calcifications in different locations and their relationship to aortic calcification. In cadavers, we examined the association between the frequency of dental pulp stones and aortic calcification, revealing a significant association. Notably, dental pulp stones appeared prior to aortic calcification. Using a rat model of hyperphosphatemia, we confirmed that dental pulp stones formed earlier than calcification in the aortic arch. Interestingly, there were very few instances of aortic calcification without dental pulp stones. Additionally, we conducted cell culture experiments with vascular smooth muscle cells (SMCs) and dental pulp cells (DPCs) to explore the regulatory mechanism underlying high phosphate-mediated calcification. We found that DPCs produced calcification deposits more rapidly and exhibited a stronger augmentation of osteoblast differentiation markers compared with SMCs. In conclusion, the observation of dental pulp stones through X-ray examination during dental checkups could be a valuable method for early diagnosis of aortic calcification risk.