A Preliminary Investigation into the Effect of Low-Energy Lasers on Dental Pulp Stem Cell Proliferation and the Associated Mechanism.

BACKGROUND: Dental pulp stem cells (DPSCs) have self-renewal and multidirectional differentiation potentials. As such, DPSCs have a wide range of clinical applications. Low-level laser therapy (LLLT) has positive photobiostimulatory effects on cell proliferation, angiogenesis, osteogenic differentiation, bone regeneration, and fracture healing. However, there have been few studies on the effect of low-energy lasers on DPSC proliferation. METHODS: DPSCs were obtained from dental pulp tissue. The effects of LLLT on the proliferation of DPSCs and the associated mechanisms were investigated by in vitro culture and laser irradiation. RESULTS: LLLT with energy densities of 3.5 J/cm2 and 14 J/cm2promoted the proliferation of DPSCs. Differential protein expression studies suggested the stimulation of DPSC proliferation by LLLT involved the PI3K-Akt and Rap1 signaling pathways, as well as the apoptosis-related pathway. CONCLUSION: This preliminary study demonstrated that low-energy lasers have a pro-proliferative effect on DPSCs, and identified possible associated mechanisms. Our findings provide a theoretical basis for the clinical application of DPSCs and suggest novel strategies for the treatment of related diseases.

The effect of continuous long-term illumination with visible light in different spectral ranges on mammalian cells.

One of the biggest challenges in tissue engineering and regenerative medicine is to ensure oxygen supply of cells in the (temporary) absence of vasculature. With the vision to exploit photosynthetic oxygen production by microalgae, co-cultivated in close vicinity to oxygen-consuming mammalian cells, we are searching for culture conditions that are compatible for both sides. Herein, we investigated the impact of long-term illumination on mammalian cells which is essential to enable photosynthesis by microalgae: four different cell types-primary human fibroblasts, dental pulp stem cells, and osteoblasts as well as the murine beta-cell line INS-1-were continuously exposed to warm white light, red or blue light over seven days. We observed that illumination with red light has no adverse effects on viability, metabolic activity and growth of the cells whereas exposure to white light has deleterious effects that can be attributed to its blue light portion. Quantification of intracellular glutathione did not reveal a clear correlation of this effect with an enhanced production of reactive oxygen species. Finally, our data indicate that the cytotoxic effect of short-wavelength light is predominantly a direct effect of cell illumination; photo-induced changes in the cell culture media play only a minor role.

Effect of Low-Level Diode Laser and Red Light-Emitting Diode on Survival and Osteogenic/Odontogenic Differentiation of Human Dental Pulp Stem Cells.

Background: This investigation set out to compare the impacts of low-level diode laser (LLDL) and red light-emitting diode (LED) on the survival of human dental pulp stem cells (hDPSCs) and osteogenic/odontogenic differentiation. Methods and materials: In this ex vivo experimental study, the experimental groups underwent the irradiation of LLDL (4 J/cm2 energy density) and red LED in the osteogenic medium. Survival of hDPSCs was assessed after 24 and 48 h (n = 9) using the methyl thiazolyl tetrazolium (MTT) assay. The assessment of osteogenic/odontogenic differentiation was conducted using alizarin red staining (ARS; three repetitions). The investigation of osteogenic and odontogenic gene expression was performed at two time points, specifically 24 and 48 h (n = 12). This analysis was performed utilizing real-time reverse-transcription polymerase chain reaction (RT-PCR). The groups were compared at each time point using SPSS version 24. To analyze the data, the Mann-Whitney U test, analysis of variance, Tukey's test, and t-test were utilized. Results: The MTT assay showed that LLDL significantly decreased the survival of hDPSCs after 48 h, compared with other groups (p < 0.05). The qualitative results of ARS revealed that LLDL and red LED increased the osteogenic differentiation of hDPSCs. LLDL and red LED both upregulated the expression of osteogenic/odontogenic genes, including bone sialoprotein (BSP), alkaline phosphatase (ALP), dentin matrix protein 1 (DMP1), and dentin sialophosphoprotein (DSPP), in hDPSCs. The LLDL group exhibited a higher level of gene upregulation (p < 0.0001). Conclusions: The cell survival of hDPSCs was reduced, despite an increase in osteogenic/odontogenic activity. Clinical relevance: Introduction of noninvasive methods in regenerative endodontic treatments.

Assesment of radiotherapy effects on the blood flow in gingiva and dental pulp - a laser Doppler flowmetry study.

OBJECTIVE: This study aims to determine and compare the dental pulp and gingival blood flow in patients referred for oropharyngeal radiotherapy (RT) at three different time points: before the start, immediately after, and six months following the completion of RT. The aim is also to evaluate the dependence of the pulp and gingival blood flow on the radiation dose. METHODOLOGY: A prospective study included 10 patients referred for intensity-modulated RT (IMRT) in the oropharyngeal region, with at least one intact tooth surrounded by a healthy gingiva. The dose received by each selected tooth and adjacent gingiva was determined according to the map of treatment planning and computer systems. The blood flow measurements were performed using the laser Doppler flowmetry (LDF) method. RESULTS: Comparing vascular flows at three different time points, the median blood flow in the dental pulp showed no statistically significant difference (p=0.325), contrary to gingiva (p=0.011). Immediately after RT completion, the gingival flow significantly increased compared to its starting point (p=0.012). The pulp flow correlated negatively with the radiation dose, whereas a strong correlation was noted 6 months following the RT completion. CONCLUSIONS: RT caused a significant acute gingival blood flow increase, followed by a long-term (over six months) tendency to return to the starting levels. The dental pulp blood flow is differently affected by higher radiation doses (over 50Gy) in comparison to lower doses (below 50Gy). During RT planning, considering the possibility of protecting the teeth localized near the Gross Tumor Volume as a sensitive organ is recommended.

Influence of violet LED associated or not with peroxide gel on inflammation, mineralization, and collagen fiber maturation in dentin and pulp tissue.

OBJECTIVES: To evaluate the influence of violet LED, associated or not with a 17.5% hydrogen peroxide (HP) bleaching gel, on inflammation, mineralization in pulp tissue, and collagen fiber maturation in dentin and pulp tissue. MATERIALS AND METHODS: The maxillary molars of eighty Wistar rats were distributed into four groups (n = 10): CONT - without treatment; HP - 30 min application of 17.5% HP; LED - 20 min application of violet LED; and HP+LED - application of PH and violet LED. Rats were euthanized and jaws were processed for histologic and immunohistochemical evaluation (IL-17, IL-23, and osteocalcin) and picrosirius red immediately after (T0), and at 7 (T1), 15 (T2), and 30 days (T3) post-treatment, with Wilcoxon, Mann-Whitney, paired T-test, and T-test (α = 0.05). RESULTS: HP and HP+LED presented necrosis and severe inflammatory infiltrate. When compared to CONT group, LED presented severe osteocalcin (OCN) immunostaining in T2 and less immature fibers in T2 and T3. CONCLUSION: The violet LED caused no severe damage to the pulp tissue, increased IL-17 and IL-23 expression in T0 when associated with HP, and had no influence on pulp tissue mineralization, besides accelerating the maturation of collagen fibers of dentin. CLINICAL RELEVANCE: Violet LED therapy induced no inflammation in the pulp tissue of rats and played no role in pulp tissue fibrosis, besides accelerating the maturation of dentin collagen fibers.

Dental pulp stem cell-derived small extracellular vesicle in irradiation-induced senescence.

Small extracellular vesicles (sEV) facilitate signaling molecule transfer among cells. We examined the therapeutic efficacy of human dental pulp stem cell-derived sEV (hDPSC-sEV) against cellular senescence in an irradiated-submandibular gland mouse model. Seven-week-old mice were exposed to 25 Gy radiation and randomly assigned to control, phosphate-buffered saline (PBS), or hDPSC-sEV groups. At 18 days post-irradiation, saliva production was measured; histological and reverse transcription-quantitative PCR analyses of the submandibular glands were performed. The salivary flow rate did not differ significantly between the PBS and hDPSC-sEV groups. AQP5-expressing acinar cell numbers and AQP5 expression levels in the submandibular glands were higher in the hDPSC-sEV group than in the other groups. Furthermore, compared with non-irradiated mice, mice in the 25 Gy + PBS group showed a high senescence-associated-ß-galactosidase-positive cell number and upregulated senescence-related gene (p16INK4a, p19Arf, p21) and senescence-associated secretory phenotypic factor (MMP3, IL-6, PAI-1, NF-κB, and TGF-ß) expression, all of which were downregulated in the hDPSC-sEV group. Superoxide dismutase levels were lower in the PBS group than in the hDPSC-sEV group. In summary, hDPSC-sEV reduced inflammatory cytokine and senescence-related gene expression and reversed oxidative stress in submandibular cells, thereby preventing irradiation-induced cellular senescence. Based on these results, we hope to contribute to the development of innovative treatment methods for salivary gland dysfunction that develops after radiotherapy for head and neck cancer.

Inverse and reciprocal regulation of p53/p21 and Bmi-1 modulates vasculogenic differentiation of dental pulp stem cells.

Dental pulp stem cells (DPSC) are capable of differentiating into vascular endothelial cells. Although the capacity of vascular endothelial growth factor (VEGF) to induce endothelial differentiation of stem cells is well established, mechanisms that maintain stemness and prevent vasculogenic differentiation remain unclear. Here, we tested the hypothesis that p53 signaling through p21 and Bmi-1 maintains stemness and inhibits vasculogenic differentiation. To address this hypothesis, we used primary human DPSC from permanent teeth and Stem cells from Human Exfoliated Deciduous (SHED) teeth as models of postnatal mesenchymal stem cells. DPSC seeded in biodegradable scaffolds and transplanted into immunodeficient mice generated mature human blood vessels invested with smooth muscle actin-positive mural cells. Knockdown of p53 was sufficient to induce vasculogenic differentiation of DPSC (without vasculogenic differentiation medium containing VEGF), as shown by increased expression of endothelial markers (VEGFR2, Tie-2, CD31, VE-cadherin), increased capillary sprouting in vitro; and increased DPSC-derived blood vessel density in vivo. Conversely, induction of p53 expression with small molecule inhibitors of the p53-MDM2 binding (MI-773, APG-115) was sufficient to inhibit VEGF-induced vasculogenic differentiation. Considering that p21 is a major downstream effector of p53, we knocked down p21 in DPSC and observed an increase in capillary sprouting that mimicked results observed when p53 was knocked down. Stabilization of ubiquitin activity was sufficient to induce p53 and p21 expression and reduce capillary sprouting. Interestingly, we observed an inverse and reciprocal correlation between p53/p21 and the expression of Bmi-1, a major regulator of stem cell self-renewal. Further, direct inhibition of Bmi-1 with PTC-209 resulted in blockade of capillary-like sprout formation. Collectively, these data demonstrate that p53/p21 functions through Bmi-1 to prevent the vasculogenic differentiation of DPSC.

Physical and Biological Properties of a Chitosan Hydrogel Scaffold Associated to Photobiomodulation Therapy for Dental Pulp Regeneration: An In Vitro and In Vivo Study.

BACKGROUND: The regeneration of dental pulp, especially in cases of pulp death of immature teeth, is the goal of the regenerative endodontic procedures (REPs) that are based on tissue engineering principles, consisting of stem cells, growth factors, and scaffolds. Photobiomodulation therapy (PBMT) showed to improve dental pulp regeneration through cell homing approaches in preclinical studies and has been proposed as the fourth element of tissue engineering. However, when a blood clot was used as a scaffold in one of these previous studies, only 30% of success was achieved. The authors pointed out the instability of the blood clot as the regeneration shortcoming. Then, to circumvent this problem, a new scaffold was developed to be applied with the blood clot. The hypothesis of the present study was that an experimental injectable chitosan hydrogel would facilitate the three-dimensional spatial organization of endogenous stem cells in dental pulp regeneration with no interference on the positive influence of PBMT. METHODS: For the in vitro analysis, stem cells from the apical papilla (SCAPs) were characterized by flow cytometry and applied in the chitosan scaffold for evaluating adhesion, migration, and proliferation. For the in vivo analysis, the chitosan scaffold was applied in a rodent orthotopic dental pulp regeneration model under the influence of PBMT (660 nm; power output of 20 mW, beam area of 0.028 cm2, and energy density of 5 J/cm2). RESULTS: The scaffold tested in this study allowed significantly higher viability, proliferation, and migration of SCAPs in vitro when PBMT was applied, especially with the energy density of 5 J/cm2. These results were in consonance to those of the in vivo data, where pulp-like tissue formation was observed inside the root canal. CONCLUSION: Chitosan hydrogel when applied with a blood clot and PBMT could in the future improve previous results of dental pulp regeneration through cell homing approaches.

ODONTOLOGICAL EFFECTS OF IONIZING RADIATION (review). / ODONTOLOGIChNI EFEKTY IONIZUIuChOGO VYPROMINIuVANNIa (ogliad).

BACKGROUND: Odontological effects of ionizing radiation (IR) as a result of radiotherapy, the consequences of accidents at nuclear power plants and industry, individual occupational exposure, etc. deserve significant attention interns of radiation medicine and radiation safety. OBJECTIVE: to analyze and summarize clinical and experimental data on the odontological radiation effects. OBJECT: the pathological changes in the hard tissues of teeth, pulp, periodontium, mucousmembranes of the mouth and jaws due to exposure to IR. METHOD: search in the PubMed / MEDLINE, Google Scholarabstract medical and biological databases, scientific libraries of the relevant sources of scientific information. RESULTS: Radiobiological effects of IR due to its direct and indirect action are manifested throughout the period ofodontogenesis and formation of the facial skeleton. Experimental and clinical data (in children and adults) indicatethe increased risk of dental caries, reduction of pain threshold and vascularization of tooth pulp along with its fibrosis and atrophy, periodontal dysfunction, which predispose to a high probability of tooth loss. Abnormalities in theactivity of osteoblasts and cementoblasts of dental periosteum and osteoblasts of alveolar process in combinationwith circulatory disorders due to endothelial cell death, hyalinization, thrombosis and vascular obliteration increasethe risk of jaw osteoradionecrosis. Children who have undergone a prenatal exposure to IR as a result of theChornobyl NPP accident have a premature change of teeth. Deterioration of periodontal tissues and early development of acute and complicated dental caries are typical for children and adults affected by the Chornobyl disaster. CONCLUSIONS: Summarized data on the effects of radiation exposure under different conditions on teeth primordia(i.e. immature teeth), their formation and eruption in experimental and clinical settings, as well as on the odontological radiation effects in adults are summarized. Condition of the teeth in the Chornobyl NPP accident survivorsis described. Understanding and taking into account the radiobiological odontological effects is necessary in thelight of planning, preparing, and conducting local radiation therapy and developing the standards of radiation safety and measures to protect professionals and the public in the event of possible radiation accidents at the nuclearpower plants and industry facilities.

Reactions of dental pulp to hydrogen peroxide photolysis-based antimicrobial chemotherapy under ultraviolet-A irradiation in rats.

Hydrogen peroxide photolysis-based antimicrobial chemotherapy that utilizes ultraviolet-A irradiation (UVA-H2O2 photolysis) has been previously proposed as a method of treatment of cariogenic biofilm. Therefore, in the present study, we aimed to assess time-dependent reactions in the dental pulp of rats after UVA-H2O2 photolysis. Maxillary first molars were treated. UVA irradiation (wavelength: 365 nm) with 3 wt% H2O2 was performed for 90 s at a radiant emittance of 500-2000 mW/cm2 on the rats for 3 consecutive days or only 1 day. The animals were sacrificed at Days 1, 3, 7, and 21 after the treatment for the histological evaluation of inflammatory cells and immunohistochemistry of heat shock protein (HSP)-25, a marker of odontoblasts. Tertiary dentin formation was evaluated at Day 21 by histomorphometry and micro-CT analysis. UVA-H2O2 photolysis elicited little infiltration of inflammatory cells, but disturbances in the odontoblast layer and/or presence of localized degenerative tissue were observed on Day 3. This condition was followed by a healing process that was characterized by the reappearance of HSP-25 positive odontoblast-like cells at Day 7 and tertiary dentin formation at Day 21. The amount of tertiary dentin formed was dependent on the intensity of treatment; repeated UVA irradiations of H2O2 at 2000 mW/cm2 resulted in the largest amount of tertiary dentin formation at the pulp horn regions. Our findings suggest that UVA-H2O2 photolysis treatment can be used to treat dental caries clinically because the post-treatment inflammatory reaction was minimal and tertiary dentin formation was substantial, which may prove effective in protecting dental pulp from external irritants. As a cautionary consideration, the radiant emittance of the UVA irradiation should be carefully optimized before clinical application.

Wound Healing and Cell Dynamics Including Mesenchymal and Dental Pulp Stem Cells Induced by Photobiomodulation Therapy: An Example of Socket-Preserving Effects after Tooth Extraction in Rats and a Literature Review.

High-intensity laser therapy (HILT) and photobiomodulation therapy (PBMT) are two types of laser treatment. According to recent clinical reports, PBMT promotes wound healing after trauma or surgery. In addition, basic research has revealed that cell differentiation, proliferation, and activity and subsequent tissue activation and wound healing can be promoted. However, many points remain unclear regarding the mechanisms for wound healing induced by PBMT. Therefore, in this review, we present an example from our study of HILT and PBMT irradiation of tooth extraction wounds using two types of lasers with different characteristics (diode laser and carbon dioxide laser). Then, the effects of PBMT on the wound healing of bone tissues are reviewed from histological, biochemical, and cytological perspectives on the basis of our own study of the extraction socket as well as studies by other researchers. Furthermore, we consider the feasibility of treatment in which PBMT irradiation is applied to stem cells including dental pulp stem cells, the theme of this Special Issue, and we discuss research that has been reported on its effect.

Effects of diode laser irradiation on dental pulps in rats.

OBJECTIVES: To evaluate the effects of different power densities of diode laser on dental pulps in rats. BACKGROUND: In this study, we used the maxillary central incisors (n=80) of the 40 adult male Wistar albino rats. METHODS: Rats were randomly divided into four groups according to power densities of diode laser (n=10). Histopathological changes in pulp and height of odontoblast layer were examined . All data were compared statistically using Mann‒Whitney U (Bonferroni) test, p<0.05. RESULTS: G2 displayed slight histolopathologic alterations such as odontoblast cell disorganization and irregularities in cell extensions. Alterations were more prominent in the G3 than G2. Although the lowest odontoblast layer was measured in the G4, the difference in height of odontoblast layer among the groups was not found to be statistically significant. CONCLUSION: It was concluded that the use of diode laser caused changes at the cellular level in histological examination and may induce the formation of tertiary dentin by influencing the secretory activity of odontoblasts. As long as used in accordance with the recommended procedure, the diode laser can be safely used in dental hard tissues (Tab. 1, Fig. 4, Ref. 15).

Comparison of in vivo and in vitro models to evaluate pulp temperature rise during exposure to a Polywave® LED light curing unit.

OBJECTIVES: To measure and compare in vivo and in vitro pulp temperature (PT) increase (ΔTEMP) over baseline, physiologic temperature using the same intact upper premolars exposed to the same Polywave® LED curing light. METHODOLOGY: After local Ethics Committee approval (#255,945), local anesthesia, rubber dam isolation, small occlusal preparations/minute pulp exposure (n=15) were performed in teeth requiring extraction for orthodontic reasons. A sterile probe of a temperature measurement system (Temperature Data Acquisition, Physitemp) was placed within the pulp chamber and the buccal surface was sequentially exposed to a LED LCU (Bluephase 20i, Ivoclar Vivadent) using the following exposure modes: 10-s low or high, 5-s Turbo, and 60-s high. Afterwards, the teeth were extracted and K-type thermocouples were placed within the pulp chamber through the original access. The teeth were attached to an assembly simulating the in vivo environment, being similarly exposed while real-time temperature (°C) was recorded. ΔTEMP values and time for temperature to reach maximum (ΔTIME) were subjected to two-way ANOVA and Bonferroni's post-hoc tests (pre-set alpha 0.05). RESULTS: Higher ΔTEMP was observed in vitro than in vivo. No significant difference in ΔTIME was observed between test conditions. A significant, positive relationship was observed between radiant exposure and ΔTEMP for both conditions (in vivo: r2=0.917; p<0.001; in vitro: r2=0.919; p<0.001). CONCLUSION: Although the in vitro model overestimated in vivo PT increase, in vitro PT rise was close to in vivo values for clinically relevant exposure modes.

Low-level laser therapy affects dentinogenesis and angiogenesis of in vitro 3D cultures of dentin-pulp complex.

To investigate the effects of gallium-aluminum-arsenide (GaAlAs) diode laser low-level laser therapy (LLLT) on angiogenesis and dentinogenesis of the dentin-pulp complex in a human tooth slice-based in vitro model. Forty tooth slices were prepared from 31 human third molars. Slices were cultured at 37 °C, 5% CO2, and 95% humidity and randomly assigned to one of the following groups: group I: no laser treatment, group II: 660-nm diode laser; energy density = 1 J/cm2, group III: 660-nm diode laser; energy density = 3 J/cm2, group IV: 810-nm diode laser; energy density = 1 J/cm2 and group V: 810-nm diode laser; energy density = 3 J/cm2. LLLT was applied on the third and fifth days of culture. After 7 days, tissues were retrieved for real-time RT-PCR analysis to investigate the expression of VEGF, VEGFR2, DSPP, DMP-1, and BSP in respect to controls. Lower energy density (1 J/cm2) with the 660 nm wavelength showed a statistically significant up-regulation of both angiogenic (VEGF: 15.3-folds and VEGFR2: 3.8-folds) and odontogenic genes (DSPP: 6.1-folds, DMP-1: 3-fold, and BSP: 6.7-folds). While the higher energy density (3 J/cm2) with the 810 nm wavelength resulted in statistically significant up-regulation of odontogenic genes (DSPP: 2.5-folds, DMP-1: 17.7-folds, and BSP: 7.1-folds), however, the angiogenic genes had variable results where VEGF was up-regulated while VEGFR2 was down-regulated. Low-level laser therapy could be a useful tool to promote angiogenesis and dentinogenesis of the dentin-pulp complex when parameters are optimized.

Effects of photobiomodulation therapy on the extracellular matrix of human dental pulp cell sheets.

Photobiomodulation therapy (PBMT) and the cell sheet (CS) technology improve processes relevant to tissue regeneration. The aim of this study was to investigate the effects of different PBMT parameters on the architecture (histology), protein composition (Western blotting and immunohistochemistry) and ultrastructure [scanning electron microscopy (SEM) and transmission electron microscopy (TEM)] of the extracellular matrix (ECM) synthesized by CSs composed by human dental pulp stem cells (hDPSCs). METHODS: Thawed cells were recharacterized by the expression profile of the surface molecules of mesenchymal stem cells (MSCs) using flow cytometry. Clonogenic medium supplemented with vitamin C (20 µg/ml) was used for obtaining the CSs. PBMT was performed with continuous-wave diode laser (660 nm, 20 mW, 0.028cm2, 0.71 W/cm2) in punctual and contact mode. The CSs were allocated in 3 experimental groups: Control: no further treatment; PBMT1 [4 s, 3 J/cm2 (lower energy density), 0.08 J/point] and PBMT2 [7 s, 5 J/cm2 (higher energy density), 0.14 J/point]. Statistical comparisons were performed (p ≤ .05). RESULTS: The cells presented the classical immunoprofile of MSCs. Type I and type III collagens and fibronectin were present in the ECM of the CSs. PBMT1 induced higher amount of fibronectin. The overall ultrastructure of the CSs in the PBMT1 was epithelial-like, whereas the PBMT2 leads to CSs with fusiform cells arranged in bundles. TEM identified a more mature ECM and signs of apoptosis and necrosis in the PBMT2 group. CONCLUSION: PBMT influence the composition and ultrastructure of the ECM of CSs of hDPSCs. Thus, PBMT, specifically when applied in the lower energy density, could be of importance in the determination of the mechanical quality of CSs, which may favor cell therapy by improving the CS transplantation approach.

Use of 0.4-Tesla static magnetic field to promote reparative dentine formation of dental pulp stem cells through activation of p38 MAPK signalling pathway.

AIM: To investigate whether static magnetic fields (SMFs) have a positive effect on the migration and dentinogenesis of dental pulp stem cells (DPSCs) to promote reparative dentine formation. METHODOLOGY: In vitro scratch assays and a traumatic pulp exposure model were performed to evaluate the effect of 0.4-Tesla (T) SMF on DPSC migration. The cytoskeletons of the DPSCs were identified by fluorescence immunostaining and compared with those of a sham-exposed group. Dentinogenic evaluation was performed by analysing the expressions of DMP-1 and DSPP marker genes using a quantitative real-time polymerase chain reaction (qRT-PCR) process. Furthermore, the formation of calcified deposits was examined by staining the dentinogenic DPSCs with Alizarin Red S dye. Finally, the role played by the p38 MAPK signalling pathway in the migration and dentinogenesis of DPSCs under 0.4-T SMF was investigated by incorporating p38 inhibitor (SB203580) into the in vitro DPSC experiments. The Student's t-test and the Kruskal-Wallis test followed by Dunn's post hoc test with a significance level of P < 0.05 were used for statistical analysis. RESULTS: The scratch assay results revealed that the application of 0.4-T SMF enhanced DPSCs migration towards the scratch wound (P < 0.05). The cytoskeletons of the SMF-treated DPSCs were found to be aligned perpendicular to the scratch wound. After 20 days of culture, the SMF-treated group had a greater number of out-grown cells than the sham-exposed group (nonmagnetized control). For the SMF-treated group, the DMP-1 (P < 0.05) and DSPP genes (P < 0.05), analysed by qRT-PCR, exhibited a higher expression. The distribution of calcified nodules was also found to be denser in the SMF-treated group when stained with Alizarin Red S dye (P < 0.05). Given the incorporation of p38 inhibitor SB203580 into the DPSCs, cell migration and dentinogenesis were suppressed. No difference was found between the SMF-treated and sham-exposed cells (P > 0.05). CONCLUSION: 0.4-T SMF enhanced DPSC migration and dentinogenesis through the activation of the p38 MAPK-related pathway.

Comparison of in vivo and in vitro models to evaluate pulp temperature rise during exposure to a Polywave® LED light curing unit

Abstract Objectives: To measure and compare in vivo and in vitro pulp temperature (PT) increase (ΔTEMP) over baseline, physiologic temperature using the same intact upper premolars exposed to the same Polywave® LED curing light. Methodology: After local Ethics Committee approval (#255,945), local anesthesia, rubber dam isolation, small occlusal preparations/minute pulp exposure (n=15) were performed in teeth requiring extraction for orthodontic reasons. A sterile probe of a temperature measurement system (Temperature Data Acquisition, Physitemp) was placed within the pulp chamber and the buccal surface was sequentially exposed to a LED LCU (Bluephase 20i, Ivoclar Vivadent) using the following exposure modes: 10-s low or high, 5-s Turbo, and 60-s high. Afterwards, the teeth were extracted and K-type thermocouples were placed within the pulp chamber through the original access. The teeth were attached to an assembly simulating the in vivo environment, being similarly exposed while real-time temperature (°C) was recorded. ΔTEMP values and time for temperature to reach maximum (ΔTIME) were subjected to two-way ANOVA and Bonferroni's post-hoc tests (pre-set alpha 0.05). Results: Higher ΔTEMP was observed in vitro than in vivo. No significant difference in ΔTIME was observed between test conditions. A significant, positive relationship was observed between radiant exposure and ΔTEMP for both conditions (in vivo: r2=0.917; p<0.001; in vitro: r2=0.919; p<0.001). Conclusion: Although the in vitro model overestimated in vivo PT increase, in vitro PT rise was close to in vivo values for clinically relevant exposure modes.

Effects of Er:YAG and Diode Laser Irradiation on Dental Pulp Cells and Tissues.

Vital pulp therapy (VPT) is to preserve the nerve and maintain healthy dental pulp tissue. Laser irradiation (LI) is beneficial for VPT. Understanding how LI affects dental pulp cells and tissues is necessary to elucidate the mechanism of reparative dentin and dentin regeneration. Here, we show how Er:YAG-LI and diode-LI modulated cell proliferation, apoptosis, gene expression, protease activation, and mineralization induction in dental pulp cells and tissues using cell culture, immunohistochemical, genetic, and protein analysis techniques. Both LIs promoted proliferation in porcine dental pulp-derived cell lines (PPU-7), although the cell growth rate between the LIs was different. In addition to proliferation, both LIs also caused apoptosis; however, the apoptotic index for Er:YAG-LI was higher than that for diode-LI. The mRNA level of odontoblastic gene markers-two dentin sialophosphoprotein splicing variants and matrix metalloprotease (MMP)20 were enhanced by diode-LI, whereas MMP2 was increased by Er:YAG-LI. Both LIs enhanced alkaline phosphatase activity, suggesting that they may help induce PPU-7 differentiation into odontoblast-like cells. In terms of mineralization induction, the LIs were not significantly different, although their cell reactivity was likely different. Both LIs activated four MMPs in porcine dental pulp tissues. We helped elucidate how reparative dentin is formed during laser treatments.

Er:YAG Laser for Metal and Ceramic Bracket Debonding: An In Vitro Study on Intrapulpal Temperature, SEM, and EDS Analysis.

OBJECTIVE: To evaluate the effects of bracket removal using an erbium laser on the pulp temperature and enamel surface. BACKGROUND: Removal of orthodontic brackets with conventional debonding pliers may result in enamel cracks. To avoid damage to the enamel surface and effectively remove metal or ceramic brackets, different types of lasers, such as Nd:YAG, CO2, TM:YAP, diode laser, or Er:YAG, have been introduced for debonding. MATERIALS AND METHODS: A total of 55 brackets (n = 55; 20 metal and 35 ceramic ones) were bonded to 55 caries-free premolars extracted for orthodontic indications. Brackets were irradiated with Er:YAG laser (Morita, Irvine, CA) with a wavelength of 2940 nm at a power of 3.4 W, energy 170 mJ, frequency 20 Hz, pulse duration 300 µs, tip diameter 0.8 mm, air/fluid cooling 3 mL/s, and time of irradiation: 6 sec. Debonding was made by scanning (n = 15; 6 sec irradiation at distance of 2 mm from the bracket with an "S" shape movement) and circular (n = 15; 6 sec irradiation at distance of 1 mm from the bracket) motion technique in ceramic brackets or the circular motion technique in metal brackets (n = 15). The number of 10 nonirradiated teeth with ceramic (n = 5) or metal brackets (n = 5) was used as a control in SEM test and EDS analysis. The damage in tooth enamel surface and the calcium percentage were analyzed by means of scanning electron microscope (JEOL 6610LV, JEOL, Japan) and energy dispersive X-ray spectroscopy (EDS, Oxford, United Kingdom). Temperature changes in the pulp were measured by K-type thermocouple. Evaluation of the Adhesive Remnant Index (ARI) on the enamel surface of each tooth was examined after bracket debonding. RESULTS: The scanning method has caused significantly lower temperature increase (mean: 0.83°C) compared with circular motion technique around the ceramic brackets (mean: 1.78°C; p = 0.0001) or the metal brackets (mean: 1.29°C; p = 0.015). ARI score showed no differences between the study groups (p = 0.57). SEM analysis revealed no cracks on enamel surface after laser-assisted debonding in comparison with the control samples where cracks were found. EDS showed a higher mean percentage of the calcium (30.7-85.8%) for all test groups compared with control samples (mean: 7%; p = 0.0002). The amount of the calcium elements was higher for metal brackets in comparison with ceramic ones (p = 0.0002). CONCLUSIONS: Er:YAG laser-assisted debonding causes a minor increase in the pulp temperature and reduced the risk of enamel damage compared with conventional bracket removal.

Influence of Class V preparation on in vivo temperature rise in anesthetized human pulp during exposure to a Polywave® LED light curing unit.

OBJECTIVE: This in vivo study evaluated pulp temperature (PT) rise in human premolars having deep Class V preparations during exposure to a light curing unit (LCU) using selected exposure modes (EMs). METHODS: After local Ethics Committee approval, intact first premolars (n=8) requiring extraction for orthodontic reasons, from 8 volunteers, received infiltrative and intraligamental anesthesia and were isolated using rubber dam. A minute pulp exposure was attained and sterile probe from a wireless, NIST-traceable, temperature acquisition system was inserted into the coronal pulp chamber to continuously monitor PT (°C). A deep buccal Class V preparation was prepared using a high speed diamond bur under air-water spray cooling. The surface was exposed to a Polywave® LED LCU (Bluephase 20i, Ivoclar Vivadent) using selected EMs, allowing 7-min span between each exposure: 10-s in low (10-s/L), 10-s (10-s/H), 30-s (30-s/H), or 60-s (60-s/H) in high mode; and 5-s-Turbo (5-s/T). Peak PT values and PT increases over physiologic baseline levels (ΔT) were subjected to 1-way, repeated measures ANOVAs, and Bonferroni's post-hoc tests (α=0.05). Linear regression analysis was performed to establish the relationship between applied radiant exposure and ΔT. RESULTS: All EMs produced higher peak PT than the baseline temperature (p<0.001). Only 60-s/H mode generated an average ΔT of 5.5°C (p<0.001). A significant, positive relationship was noted between applied radiant exposure and ΔT (r2=0.8962; p<0.001). SIGNIFICANCE: In vivo exposure of deep Class V preparation to Polywave® LED LCU increases PT to values considered safe for the pulp, for most EMs. Only the longest evaluated EM caused higher PT increase than the critical ΔT, thought to be associated with pulpal necrosis.