Amine-bearing hydrocarbon cross-links: Tailoring helix stability, hydrophilicity, and synthetic adaptability in peptides.

This study comprehensively explored the helix-stabilizing effects of amine-bearing hydrocarbon cross-links (ABXs), revealing their context-dependent nature influenced by various structural parameters. Notably, we identified a 9-atom ABX as a robust helix stabilizer, showcasing versatile synthetic adaptability while preserving peptide water solubility. Future investigations are imperative to fully exploit this system's potential and enrich our chemical toolkit for designing innovative peptide-based biomolecules.

Injectable Dual Fenton/Enzymatically Cross-Linked Double-Network Hydrogels Based on Acrylic/Phenolic Polymers with Highly Reinforced and Tunable Mechanical Properties.

Injectable hydrogels have been extensively used as promising therapeutic scaffolds for a wide range of biomedical applications, such as tissue regeneration and drug delivery. However, their low fracture toughness and brittleness often limit their scope of application. Double-network (DN) hydrogel, which is composed of independently cross-linked rigid and ductile polymer networks, has been proposed as an alternative technique to compensate for the weak mechanical properties of hydrogels. Nevertheless, some challenges still remain, such as the complicated and time-consuming process for DN formation, and the difficulty in controlling the mechanical properties of DN hydrogels. In this study, we introduce a simple, rapid, and controllable method to prepare in situ cross-linkable injectable DN hydrogels composed of acrylamide (AAm) and 4-arm-PPO-PEO-tyramine (TTA) via dual Fenton- and enzyme-mediated reactions. By varying the concentration of Fenton's reagent, the DN hydrogels were rapidly formed with controllable gelation rate. Importantly, the DN hydrogels showed a 13-fold increase in compressive strength and a 14-fold increase in tensile strength, compared to the single network hydrogels. The mechanical properties, elasticity, and plasticity of DN hydrogels could also be modulated by simply varying the preparation conditions, including the cross-linking density and reagent concentrations. At low cross-linker concentration (<0.05 wt %), the plastic DN hydrogel stretched to over 6,500%, whereas high cross-linker concentration (≥0.05 wt %) induced fully elastic hydrogels, without hysteresis. Besides, DN hydrogels were endowed with rapid self-recovery and highly enhanced adhesion, which can be further applied to wearable devices. Moreover, human dermal fibroblasts treated with DN hydrogels retained viability, demonstrating the biocompatibility of the cross-linking system. Therefore, we expect that the dual Fenton-/enzyme-mediated cross-linkable DN hydrogels offer great potential as advanced biomaterials applied for hard tissue regeneration and replacement.

Double-crosslinkable poly(urethane)-based hydrogels relying on supramolecular interactions and light-initiated polymerization: promising tools for advanced applications in drug delivery.

Physical and chemical hydrogels are promising platforms for tissue engineering/regenerative medicine (TERM). In particular, physical hydrogels are suitable for use in the design of drug delivery systems owing to their reversibility and responsiveness to applied stimuli and external environment. Alternatively, the use of chemical hydrogels represents a better strategy to produce stable 3D constructs in the TERM field. In this work, these two strategies were combined to develop multi-functional formulations integrating both drug delivery potential and TERM approaches in a single device. Specifically, a novel photo-sensitive poly(ether urethane) (PEU) was developed to form supramolecular networks with α-cyclodextrins (α-CDs). The PEU was successfully synthesized using Poloxamer® 407, 1,6-diisocyanatohexane and 2-hydroxyethyl methacrylate, as assessed by infrared spectroscopy, size exclusion chromatography and proton nuclear magnetic resonance (1H NMR) spectroscopy. Subsequently, PEU thermo-responsiveness was characterized through critical micelle temperature evaluation and dynamic light scattering analyses, which suggested the achievement of a good balance between molecular mass and overall hydrophobicity. Consequently, the formation of supramolecular domains with α-CDs was demonstrated through X-ray diffraction and 1H NMR spectroscopy. Supramolecular hydrogels with remarkably fast gelation kinetics (i.e., few minutes) were designed using a low PEU concentration (≤5% w/v). All formulations were found to be cytocompatible according to the ISO 10993-5 regulation. Notably, the hydrogels were observed to possess mechanical properties and self-healing ability, according to rheological tests, and their fast photo-crosslinking was evidenced (<60 s) by photo-rheology. A high curcumin payload (570 µg mL-1) was encapsulated in the hydrogels, which was released with highly tunable and progressive kinetics in a physiological-simulated environment for up to 5 weeks. Finally, a preliminary evaluation of hydrogel extrudability was performed using an extrusion-based bioprinter, obtaining 3D-printed structures showing good morphological fidelity to the original design. Overall, the developed hydrogel platform showed promising properties for application in the emerging field of regenerative pharmacology as (i) easily injectable drug-loaded formulations suitable for post-application stabilization through light irradiation, and (ii) biomaterial inks for the fabrication of patient-specific drug-loaded patches.

Self-Adaptive Synthesis of Non-Covalent Crosslinkers while Folding Single-Chain Polymers.

Peptide folding is a dynamic process driven by non-covalent cross-linking leading to functional nanostructures for essential biochemical activities. However, replicating this process in synthetic systems is challenging due to the difficulty in mimicking nature's real-time regulation of non-covalent crosslinking for single-chain polymer folding. Here, we address this by employing anionic dithiol building blocks to create macrocyclic disulfides as non-covalent crosslinkers that adapted to the folding process. Initially, small macrocycles facilitated a low degree folding of a polycation. Then, this preorganized structure catalysed the production of larger macrocycles that enhanced the folding conversely. The self-adaptive synthesis was verified through the encapsulation of an anticancer drug, showing an updated production distribution of non-covalent crosslinkers and maximizing drug-loading efficiency against drug-resistant cancer in vitro. Our research advances the understanding of molecular systems by exploring species evolution via the structural dynamics of polymer folding. Additionally, adaptive synthesis enables controlled, sequential folding of synthetic polymers, with the potential to mimic protein functions.

Kinase-catalyzed crosslinking: A comparison of ATP-crosslinker analogs.

Protein phosphorylation is catalyzed by kinases to regulate cellular events and disease states. Identifying kinase-substrate relationships represents a powerful strategy to understand cell biology and disease yet remains challenging due to the rapid dynamics of phosphorylation. Over the last decade, several γ-phosphoryl modified ATP analogs containing crosslinkers were developed to covalently conjugate kinases, their substrates, and their associated proteins for subsequent characterization. Here, kinetics and crosslinking experiments demonstrated that the UV-activated analogs, ATP-aryl azide and ATP-benzophenone, offered the most robust crosslinking, whereas electrophilic ATP-aryl fluorosulfate promoted the most effective proximity-enabled crosslinking. The data will guide future applications of kinase-catalyzed crosslinking to study normal and disease biology.

Efficient conversion of hemoglobin to a non-vasoactive oxygen carrier by site-specific cross-linking with azido acyl methyl phosphates followed by bio-orthogonal CuAAC with a bis-alkyne.

While cross-linked hemoglobin tetramers are functional acellular oxygen carriers, their ability to scavenge endogenous nitric oxide (NO) by endothelial pore penetration results in adverse cardiovascular effects. Animal studies established that cross-linked human hemoglobins, chemically joined into a double protein, avoid NO scavenging, presumably due to their larger size preventing penetration into endothelial regions that produce NO. In the present report, we utilize azide-containing acyl phosphate reagents to form cross-linked hemoglobins then bio-orthogonally click-couple them with a bis-alkyne (CuAAC). The production of these larger oxygen-carrying hemoglobin conjugates is obtained in high yields through subunit-specific cross-linking between each ßLys82 ε-amino group. The methyl phosphate leaving groups provide electrostatically induced ß-subunit site-selectivity, producing azido-cross-linked hemoglobin that undergoes highly efficient CuAAC compared with previous cross-linkers. The acyl phosphates also efficiently cross-link both T-state and R-state hemoglobin. The resulting bis- and tris-tetrameric hemoglobin conjugates exhibit oxygen affinity and cooperativity that are comparable to those of the native protein. The hemoglobin derivatives from the process we describe can function as sources of oxygen in biomedical applications, such as in ex-vivo donor organ perfusion.

Exploring the Effectiveness of Carboxymethylated and Crosslinked Albizia procera Gum in Diltiazem Hydrochloride Matrix Tablets: A Comparative Analysis.

This study investigates the efficacy of modified Albizia procera gum as a release-retardant polymer in Diltiazem hydrochloride (DIL) matrix tablets. Carboxymethylated Albizia procera gum (CAP) and ionically crosslinked carboxymethylated Albizia procera gum (Ca-CAP) were utilized, with Ca-CAP synthesized via crosslinking CAP with calcium ions (Ca2+) using calcium chloride (CaCl2). Fourier Transform (FT) IR analysis affirmed polymer compatibility, while differential scanning calorimetry (DSC) and X-ray diffraction (XRD) assessed thermal behavior and crystallinity, respectively. Zeta potential analysis explored surface charge and electrostatic interactions, while rheology examined flow and viscoelastic properties. Swelling and erosion kinetics provided insights into water penetration and stability. CAP's carboxymethyl groups (-CH2-COO-) heightened divalent cation reactivity, and crosslinking with CaCl2 produced Ca-CAP through -CH2-COO- and Ca2+ interactions. Structural similarities between the polymers were revealed by FTIR, with slight differences. DSC indicated modified thermal behavior in Ca-CAP, while Zeta potential analysis showcased negative charges, with Ca-CAP exhibiting lower negativity. XRD highlighted increased crystallinity in Ca-CAP due to calcium crosslinking. Minimal impact on RBC properties was observed with both polymers compared to the positive control as water for injection (WFI). Ca-CAP exhibited improved viscosity, strength, controlled swelling, and erosion, allowing prolonged drug release compared to CAP. Stability studies confirmed consistent six-month drug release, emphasizing Ca-CAP's potential as a stable, sustained drug delivery system over CAP. Robustness and accelerated stability tests supported these findings, underscoring the promise of Ca-CAP in controlled drug release applications.

Development of Rapid and Facile Solid-Phase Synthesis of PROTACs via a Variety of Binding Styles.

Optimizing linker design is important for ensuring efficient degradation activity of proteolysis-targeting chimeras (PROTACs). Therefore, developing a straightforward synthetic approach that combines the protein-of-interest ligand (POI ligand) and the ligand for E3 ubiquitin ligase (E3 ligand) in various binding styles through a linker is essential for rapid PROTAC syntheses. Herein, a solid-phase approach for convenient PROTAC synthesis is presented. We designed azide intermediates with different linker lengths to which the E3 ligand, pomalidomide, is attached and performed facile PROTACs synthesis by forming triazole, amide, and urea bonds from the intermediates.

Designing Soluble PROTACs: Strategies and Preliminary Guidelines.

Solubility optimization is a crucial step to obtaining oral PROTACs. Here we measured the thermodynamic solubilities (log S) of 21 commercial PROTACs. Next, we measured BRlogD and log kwIAM (lipophilicity), EPSA, and Δ log kwIAM (polarity) and showed that lipophilicity plays a major role in governing log S, but a contribution of polarity cannot be neglected. Two-/three-dimensional descriptors calculated on conformers arising from conformational sampling and steered molecular dynamics failed in modeling solubility. Infographic tools were used to identify a privileged region of soluble PROTACs in a chemical space defined by BRlogD, log kwIAM and topological polar surface area, while machine learning provided a log S classification model. Finally, for three pairs of PROTACs we measured the solubility, lipophilicity, and polarity of the building blocks and identified the limits of estimating PROTAC solubility from the synthetic components. Overall, this paper provides promising guidelines for optimizing PROTAC solubility in early drug discovery programs.

Injectable and biocompatible alginate-derived porous hydrogels cross-linked by IEDDA click chemistry for reduction-responsive drug release application.

In this work, novel injectable and reduction-responsive hydrogels were successfully prepared via inverse electron demand Diels-Alder reaction between alginate-norbornene and a water-soluble PEG based disulfide cross-linker. The reduction-responsive cross-linker was designed to contain a PEG chain within two disulfide linkages, and two terminal tetrazine groups. The resulting hydrogels possessed high swelling ratios, porous morphology, excellent drug loading efficiency (~92%), and suitable mechanical properties. The drug release experiments demonstrated that the hydrogels released more than 90% of the encapsulated doxorubicin (DOX) in the presence of 10 mM glutathione while a minimal DOX release (<25%) was measured in physiological buffer (PBS, pH = 7.4) after 11 d. The cross-linker and hydrogels did not exhibit any apparent cytotoxicity to fibroblast cells. In contrast, DOX-loaded hydrogels induced anti-tumor activity against cancer cells. The injectable and reduction-responsive hydrogels hold great potential as a biomaterial for stimuli responsive drug delivery applications.

Freeze-thaw and solvent-exchange strategy to generate physically cross-linked organogels and hydrogels of curdlan with tunable mechanical properties.

Physical gels from natural polysaccharides present the advantage of no toxic cross-linking agents and no chemical modification during preparation. Herein, novel physical gels, transparent organogels and opaque hydrogels from the microorganism-derived (1,3)-ß-D-glucan of curdlan were prepared in dimethyl sulfoxide (DMSO) using the freeze-thaw technique, followed by a solvent-exchange strategy with water. The mechanical and structural properties of these gels were investigated by rheology, scanning electron microscopy, attenuated total reflection infrared spectroscopy, wide-angle X-ray diffraction and small-angle X-ray scattering. Gelation mechanisms and intermolecular interaction models have also been proposed. The good solvent DMSO serves as both a crosslinker and a pore-foaming agent in organogels. The reversible macromolecular conformation changes and phase separation of curdlan endow the gels with reversible transparency, volume change and tunable mechanical strength. The new design strategy of facile preparation and performance tuning provides a platform for developing new organogels and sterile hydrogels of curdlan.

A 4arm-PEG macromolecule crosslinked chitosan hydrogels as antibacterial wound dressing.

In order to develop better wound dressings, a novel chitosan hydrogel (Cn-Nm gel) was designed and fabricated by using aldehyde-4-arm polyethylene glycol (4r-PEG-CHO) to crosslink the chitosan dissolved in alkaline solution, amino-4-arm polyethylene glycol (4r-PEG-NH2) was chosen as the additive simultaneously. The special dissolution technique and macromolecular crosslinking structure endows the Cn-Nm gels with better performance than that of gels prepared by acid dissolving method with micromolecule crosslinker. First, Cn-Nm gels own strong toughness with 500 kPa tensile strength and 1000% elongation, about 400% swelling ratio and fast water absorption rate. Second, about 300 kPa adhesive strength and strippability between the gels and skin is achieved. More importantly, Cn-Nm gels show nearly 100% antibacterial rate towards Escherichia coli and Staphylococcus aureus. Excellent biocompatibility is also proved by the mouse fibroblasts tests. All of the performance makes this developed chitosan-based gel be the potential candidate as a wound dressing.

Development of an RNA-protein crosslinker to capture protein interactions with diverse RNA structures in cells.

Characterization of RNA-protein interaction is fundamental for understanding the metabolism and function of RNA. UV crosslinking has been widely used to map the targets of RNA-binding proteins, but is limited by low efficiency, requirement for zero-distance contact, and biases for single-stranded RNA structure and certain residues of RNA and protein. Here, we report the development of an RNA-protein crosslinker (AMT-NHS) composed of a psoralen derivative and an N-hydroxysuccinimide ester group, which react with RNA bases and primary amines of protein, respectively. We show that AMT-NHS can penetrate into living yeast cells and crosslink Cbf5 to H/ACA snoRNAs with high specificity. The crosslinker induced different crosslinking patterns than UV and targeted both single- and double-stranded regions of RNA. The crosslinker provides a new tool to capture diverse RNA-protein interactions in cells.

Anti-Inflammatory and Prochondrogenic In Situ-Formed Injectable Hydrogel Crosslinked by Strontium-Doped Bioglass for Cartilage Regeneration.

Directed differentiation of bone marrow mesenchymal stem cells (BMSCs) toward chondrogenesis plays a predominant role in cartilage repair. However, the uncontrolled inflammatory response to implants is found to impair the stability of scaffolds and the cartilage regeneration outcome. Herein, we fabricated an injectable hydrogel crosslinked by strontium-doped bioglass (SrBG) to modulate both human BMSC (hBMSC) differentiation and the inflammatory response. The results revealed that the introduction of Sr ions could simultaneously enhance the proliferation of hBMSCs, upregulate cartilage-specific gene expression, and improve the secretion of glycosaminoglycan. Moreover, after cultured with SA/SrBG extracts in vitro, a majority of macrophages were polarized toward the M2 phenotype and subsequently facilitated the chondrogenic differentiation of hBMSCs. Furthermore, after the composite hydrogel was injected into a cartilage defect model, neonatal cartilage-like tissues with a smooth surface and tight integration with original tissues could be found. This study suggests that the synergistic strategy based on an enhanced differentiation ability and a regulated inflammatory response is promising and may lead the way to new anti-inflammatory biomaterials.

Facile engineering of ECM-mimetic injectable dual crosslinking hydrogels with excellent mechanical resilience, tissue adhesion, and biocompatibility.

Injectable hydrogels have aroused ever-increasing interest for their cell/biomaterial delivery ability through minimally invasive procedures. Nevertheless, it is still a challenge to simply fabricate natural biopolymer-based injectable hydrogels possessing satisfactory mechanical properties, bioadhesion, and cell delivery ability. Herein, we describe a facile dual crosslinking (DC) strategy for preparing extracellular matrix (ECM) mimetic hydrogels with desirable comprehensive performance. The chondroitin sulfate (CS)- and gelatin (Gel)-based single crosslinked (SC) hydrogels were first developed via reversible borate ester bonds, and further strengthened through the Michael-addition crosslinking reaction or visible-light initiated photopolymerization with thiol-containing polyethylene glycol (PEG) crosslinkers. The dynamic SC hydrogels showed good injectability, pH-sensitive gel-sol transformation, and self-adhesion ability to various biological tissues such as skin, liver, and intervertebral disc. The mechanically tough DC hydrogels displayed tunable stiffness, and resilience to compression load (up to 90% strain) owing to the effective energy dissipation mechanism. The formed DC hydrogels after subcutaneous injection well integrated with surrounding tissues and exhibited fast self-recovery properties. Moreover, the photoencapsulation of human mesenchymal stem cells (hMSCs) within the developed DC hydrogels was achieved and has been proved to be biocompatible, highlighting the great potential of the photopolymerized DC hydrogels in cell delivery and three-dimensional (3D) cell culture. This biomimetic, mechanically resilient, adhesive, and cytocompatible injectable DC hydrogel could serve as a promising candidate for tissue engineering.

Quaternary Ammonium Salts Anchored on Cross-Linked (R)-(+)-Lipoic Acid Nanoparticles for Drug-Resistant Tumor Therapy.

A membrane-lytic mechanism-based nanodrug is developed for drug-resistant tumor therapy by anchoring the small-molecule quaternary ammonium salt (QAS) on cross-linked (R)-(+)-lipoic acid nanoparticles (cLANs). The anchoring of QAS on the nanoparticle avoids the direct attack of long alkyl chains to the cell membrane under physiological conditions, while after entering tumor cells, the QAS is released from the dissociated cLANs, migrates to the phospholipid bilayer via electrostatic interaction, and destroys the cell membrane by the puncture of long alkyl chains. Since the QAS is designed to finally be hydrolyzed to amino acid betaine and food additive cetanol and the cLANs degrade to dihydrolipoic acid (DHLA, reduced form of dietary antioxidant lipoic acid in cells), the QAS@cLANs hold superior biosafety. In addition to the drug-resistant tumors, the QAS@cLANs demonstrate significant inhibition of metastatic tumors. This work provides not only a general and clinic-promising treatment for the refractory tumors but also opens a door for the medicinal use of QAS.

Macrocyclic BACE1 inhibitors with hydrophobic cross-linked structures: Optimization of ring size and ring structure.

Based on the X-ray crystallography of recombinant BACE1 and a hydroxyethylamine-type peptidic inhibitor, we introduced a cross-linked structure between the P1 and P3 side chains of the inhibitor to enhance its inhibitory activity. The P1 and P3 fragments bearing terminal alkenes were synthesized, and a ring-closing metathesis of these alkenes was used to construct the cross-linked structure. Evaluation of ring size using P1 and P3 fragments with various side chain lengths revealed that 13-membered rings were optimal, although their activity was reduced compared to that of the parent compound. Furthermore, the optimal ring structure was found to be a macrocycle with a dimethyl branched substituent at the P3 ß-position, which was approximately 100-fold more active than the non-substituted macrocycle. In addition, the introduction of a 4-carboxymethylphenyl group at the P1' position further improved the activity.

Constructing High-Recognition Protein-Imprinted Materials Using "Specially Designed" Block Macromolecular Chains as Functional Monomers and Crosslinkers.

The use of a macromolecularly functional monomer and crosslinker (MFM) to stabilize and imprint a template protein is a new method to construct high-recognition protein-imprinted materials. In this study, for the first time, a "specially designed" block MFM with both "functional capability" and "crosslinking capability" segments was synthesized via reversible addition-fragmentation chain-transfer polymerization and used to fabricate bovine serum albumin (BSA)-imprinted microspheres (SiO2@MPS@MIPs-MFM) by the surface imprinting strategy. Results from circular dichroic spectrum experiments reflected that the block MFM could maintain the natural form of BSA, whereas its corresponding and equivalent micromolecularly functional monomer (MIM) seriously destroyed the secondary structure of proteins. Batch rebinding experiments showed that the maximum adsorption capacity and imprinting factor of SiO2@MPS@MIPs-MFM reached 314.9 mg g-1 and 4.02, which were significantly superior to that of MIM-based imprinted materials. In addition, since the crosslinking capability segments in block MFM involved zwitterionic functional groups with a protein-repelling effect, SiO2@MPS@MIPs-MFM showed better specific rebinding ability than the imprinted material prepared by MFM without this component. Besides, scanning electron microscopy and transmission electron microscopy images showed that the shell thickness of SiO2@MPS@MIPs-MFM was approximately 15 nm, and such a thin imprinted layer ensured its rapid adsorption equilibrium (120 min). As a result, SiO2@MPS@MIPs-MFM revealed fantastic selectivity and recognition ability in a mixed protein solution and could efficiently extract BSA from biological samples of bovine calf serum. The proposal of block MFM enriched the options and designability of monomers in protein imprinting technology, thereby laying a foundation for developing high-performance protein-imprinted materials.

3D bioprinting of dual-crosslinked nanocellulose hydrogels for tissue engineering applications.

Hydrogels based on cellulose nanofibrils (CNFs) have been widely used as scaffolds for biomedical applications, however, the poor mechanical properties of CNF hydrogels limit their use as ink for 3D bioprinting in order to generate scaffolds for tissue engineering applications. In this study, a dual crosslinkable hydrogel ink composed of a poly(ethylene glycol) (PEG) star polymer and 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO)-oxidized nanocellulose fibers (CNFs) is presented. As the resulting hydrogel had low structural integrity, at first crosslinking of CNFs was introduced by Ca2+. Strong physical interactions between CNFs and Ca2+ cations allowed easy regulation of the viscosity of the inks for extrusion printing raising the solution viscosity by more than 1.5 times depending on the amount of Ca2+ added. The resulting hydrogel had high structural integrity and was further stabilized in a second step by photo crosslinking of PEG under visible light. In only a few seconds, hydrogels with Young's modulus between ∼10 and 30 kPa were obtained just by altering the CNF and Ca2+ content. 3D printed hydrogels supported fibroblasts with excellent cell viability and proliferation. The dual crosslinkable hydrogel ink herein developed is versatile, easy to prepare, and suitable for 3D printing of bioscaffolds with highly tailored viscoelastic and mechanical properties applicable in a wide range of regenerative medicines.

Hyperbranched polymer with dynamic thiol-aldehyde crosslinking and its application as a self-healable bioadhesive.

Bioadhesives crosslinked with dynamic bonds exhibit shear-thinning, self-healing, and on-demand detachment properties, but generally show a weak bonding performance due to their poor bulk strength. Obtaining a strong bioadhesive with reversible crosslinking remains a challenge. To address this issue, herein we engineered a dynamic thiol-aldehyde crosslinked solvent-free adhesive based on hyperbranched polymer. The adhesive was obtained by directly mixing a liquid hyperbranched polymer with thiol end groups (HBPTE) and benzaldehyde-terminated polyethylene glycol (PEGCHO) without any additional catalyst or solvent. The solvent-free strategy yielded a dense crosslinking structure with many aldehyde groups, so this HBPTE-PEGCHO adhesive can strongly bond to tissue and various non-biological substrates. In addition, the HBPTE-PEGCHO adhesive has self-healing and thermo-reversible bonding properties due to the dynamic thiol-aldehyde crosslinking matrix. In vivo wound healing experiments show that this HBPTE-PEGCHO adhesive is tissue-benign, suggesting it can be applied in clinical practice. Combining the hyperbranched polymer-based solvent-free strategy and dynamic thiol-aldehyde crosslinking chemistry provides a simple but effective way to engineer a multifunctional bioadhesive with the desired bonding performance.