Electrochemical detection of Nanog in cell extracts via target-induced resolution of an electrode-bound DNA pseudoknot.

Nanog is among the most important indicators of cell pluripotency and self-renew, so detection of Nanog is critical for tumor assessment and monitoring of clinical prognosis. In this work, a novel method for Nanog detection is proposed by using electrochemical technique based on target-induced conformational change of an electrode-bound DNA pseudoknot. In the absence of Nanog, the rigid structure of the pseudoknot will minimize the connection between the redox tag and the electrode, thus reducing the obtained faradaic current. Nevertheless, the Nanog binding may liberate the flexible single-stranded element that transforms the DNA pesudokont into DNA hairpin structure due to steric hindrance effect, thus making the electrochemical tag close to the electrode surface. Consequently, electron transfer can be enhanced and very well electrochemical response can be observed. By using the proposed method, Nanog can be determined in a linear range from 2nM to 25nM with a detection limit of 163 pM. Furthermore, the proposed method can be directly used to assay Nanog not only in purified samples but also in complex media (cell extracts), which shows potential applications in Nanog functional studies as well as clinical diagnosis in the future.

A label-free fluorescence strategy for selective detection of nicotinamide adenine dinucleotide based on a dumbbell-like probe with low background noise.

In this work we developed a novel label-free fluorescence sensing approach for the detection of nicotinamide adenine dinucleotide (NAD(+)) based on a dumbbell-like DNA probe designed for both ligation reaction and digestion reaction with low background noise. SYBR Green I (SG I), a double-helix dye, was chosen as the readout fluorescence signal. In the absence of NAD(+), the ligation reaction did not occur, but the probe was digested to mononucleotides after the addition of exonuclease I (Exo I) and exonuclease I (Exo III), resulting in a weak fluorescence intensity due to the weak interaction between SG I and mononucleotides. In the presence of NAD(+), the DNA probe was ligated by Escherichia coli DNA ligase, blocking the digestion by Exo I and Exo III. As a result, SG I was intercalated into the stem part of the DNA dumbbell probe and fluorescence enhancement was achieved. This method was simple in design, fast to operate, with good sensitivity and selectivity which could discriminate NAD(+) from its analogs.

Probing molecular pathways for DNA orientational trapping, unzipping and translocation in nanopores by using a tunable overhang sensor.

Nanopores provide a unique single-molecule platform for genetic and epigenetic detection. The target nucleic acids can be accurately analyzed by characterizing their specific electric fingerprints or signatures in the nanopore. Here we report a series of novel nanopore signatures generated by target nucleic acids that are hybridized with a probe. A length-tunable overhang appended to the probe functions as a sensor to specifically modulate the nanopore current profile. The resulting signatures can reveal multiple mechanisms for the orientational trapping, unzipping, escaping and translocation of nucleic acids in the nanopore. This universal approach can be used to program various molecular movement pathways, elucidate their kinetics, and enhance the sensitivity and specificity of the nanopore sensor for nucleic acid detection.

Solid-phase hybridization efficiency improvement on the magnetic nanoparticle surface by using dextran as molecular arms.

For reducing the steric hindrance and nonspecific binding of the target DNA, the dextran was used as molecular arms to be immobilized on the surface of magnetic nanoparticles (MNPs). Magnetic separation was used in preparation of dextran-MNPs (DMNPs). Aspartic acid and aminated DNA probe were successively modified on the dextran immobilized on the surface of MNPs. These probe-DMNPs were successfully applied to detect biotin-labeled PCR product of E. coli O157:H7 genome by hybridization. Then the complexes were bonded with streptavidin-modified alkaline phosphatase (ALP-SA). Finally the chemiluminescent signals were detected by adding 3-(2-spiroadamantane)-4-methoxy-4- (3-phosphoryloxy) phenyl-1,2-dioxetane (AMPPD). The results showed that this method had a good specificity, and higher sensitivity than that when only MNPs were used as solid carriers.

Steric crowding and the kinetics of DNA hybridization within a DNA nanostructure system.

The ability to generate precisely designed molecular networks and modulate the surrounding environment is vital for fundamental studies of chemical reactions. DNA nanotechnology simultaneously affords versatility and modularity for the construction of tailored molecular environments. We systematically studied the effects of steric crowding on the hybridization of a 20 nucleotide (nt) single-stranded DNA (ssDNA) target to a complementary probe strand extended from a rectangular six-helix tile, where the number and character of the surrounding strands influence the molecular environment of the hybridization site. The hybridization events were monitored through an increase in the quantum yield of a single reporter fluorophore (5-carboxyfluorescein) upon hybridization of the 20-nt ssDNA, an effect previously undocumented in similar systems. We observed that as the hybridization site moved from outer to inner positions along the DNA tile, the hybridization rate constant decreased. A similar rate decrease was observed when noncomplementary single- and double-stranded DNA flanked the hybridization site. However, base-pairing interactions between the hybridization site of the probe and the surrounding DNA resulted in a reduction in the reaction kinetics. The decreases in the hybridization rate constants can be explained by the reduced probability of successful nucleation of the invading ssDNA target to the complementary probe.

Distribution of repetitive DNA sequences in chromosomes of five opisthorchid species (Trematoda, Opisthorchiidae).

Genomes of opisthorchid species are characterized by small size, suggesting a reduced amount of repetitive DNA in their genomes. Distribution of repetitive DNA sequences in the chromosomes of five species of the family Opisthorchiidae (Opisthorchis felineus 2n = 14 (Rivolta, 1884), Opisthorchis viverrini 2n = 12 (Poirier, 1886), Metorchis xanthosomus 2n = 14 (Creplin, 1846), Metorchis bilis 2n = 14 (Braun, 1890), Clonorchis sinensis 2n = 14 (Cobbold, 1875)) was studied with C- and AgNOR-banding, generation of microdissected DNA probes from individual chromosomes and fluorescent in situ hybridization on mitotic and meiotic chromosomes. Small-sized C-bands were discovered in pericentric regions of chromosomes. Ag-NOR staining of opisthorchid chromosomes and FISH with ribosomal DNA probe showed that karyotypes of all studied species were characterized by the only nucleolus organizer region in one of small chromosomes. The generation of DNA probes from chromosomes 1 and 2 of O. felineus and M. xanthosomus was performed with chromosome microdissection followed by DOP-PCR. FISH of obtained microdissected DNA probes on chromosomes of these species revealed chromosome specific DNA repeats in pericentric C-bands. It was also shown that microdissected DNA probes generated from chromosomes could be used as the Whole Chromosome Painting Probes without suppression of repetitive DNA hybridization. Chromosome painting using microdissected chromosome specific DNA probes showed the overall repeat distribution in opisthorchid chromosomes.

Detection of tip-enhanced fluorescence from loop-mediated isothermal amplification of hepatitis B virus by two-photon microscopy.

Tip-enhanced fluorescence of localized DNA replication by loop-mediated isothermal amplification (LAMP) is a potential way to observe real-time biological reaction confined in nanometer scale. We successfully coated Bst polymerase on the apex (~100 nm) of an atomic force microscope (AFM) tip and performed localized LAMP reaction of hepatitis B virus (HBV). By using this tip-based reaction, the replicated HBV DNA can be directly imaged to be 400~500 nm spots by using two-photon excitation fluorescence microscopy.

Selective immobilization of oligonucleotide-modified gold nanoparticles by electrodeposition on screen-printed electrodes.

Here, we describe a proof of concept procedure for the selective immobilization of oligonucleotides functionalized gold nanoparticle probes (affinity modules) on arrayed screen-printed gold electrodes. Current microarrays are using many different ways to address their DNA probes onto the transducer area. For that reason, we have mixed the electrodeposition of metals, which is a very well known process, in addition with the DNA-gold nanoparticles formation, which is an area of great interest in biosensing applications in the field of genomics, clinical and warfare applications. Combining these fields, we have developed a novel method for the immobilization of gold nanoparticles conjugated with oligonucleotides (affinity modules) onto screenprinting gold electrodes through electrodeposition at a current positive potential of 800mV vs. Ag/AgCl. The modules were selectively immobilized onto the electrode surface being, afterwards, ready for a successful hybridization. The gold colloids take the advantage of being a carrier that allows the immobilization of any kind of bioreceptor in the same conditions and the capability of quality control analysis before the electrodeposition procedure. With this system, we avoided non-specific interactions between the transduction layer and the bioreceptor and in the case of DNA oligonucleotides allowed us the immobilization of multiple sequences in a multimodular device for a further industrial process of cheaper biochip fabrication.

Visualizing single DNA-bound proteins using DNA as a scanning probe.

Many biological processes involve enzymes moving along DNA. Such motion might be impeded by DNA-bound proteins or DNA supercoils. Current techniques are incapable of directly measuring forces that such 'roadblocks' might impose. We constructed a setup with four independently moveable optical traps, allowing us to manipulate two DNA molecules held between beads. By tightly wrapping one DNA around the other, we created a probe that can be scanned along the contour of the second DNA. We found that friction between the two polymers remains below 1 pN. Upon encountering DNA-bound proteins substantial friction forces are measured, allowing accurate localization of protein positions. Furthermore, these proteins remained associated at low probe tensions but could be driven off using forces greater than 20 pN. Finally, the full control of the orientation of two DNA molecules opens a wide range of experiments on proteins interacting with multiple DNA regions.

Single DNA molecules as probes for interrogating silica surfaces after various chemical treatments.

We examined the adsorption of single YOYO-1-labeled lambda-DNA molecules at glass surfaces after treatment with various chemical cleaning methods by using total internal reflection fluorescence microscopy (TIRFM). The characteristics of these surfaces were further assessed using contact angle (CA) measurements and atomic force microscopy (AFM). By recording the real-time dynamic motion of DNA molecules at the liquid/solid interface, subtle differences in adsorption affinities were revealed. The results indicate that the driving force for adsorption of DNA molecules on glass surfaces is mainly hydrophobic interaction. We also found that surface topography plays a role in the adsorption dynamics.

Identification of high-stringency DNA hairpin probes by partial gene folding.

Hairpin DNA sequences are widely used as probes for oligonucleotides in a broad range of assays, often as "molecular beacons". A potential disadvantage of the standard methodology for molecular beacon design is the need to add several self-complementary bases to each end of the probe, since these do not correspond to the target sequence. We describe a conceptually new method of hairpin DNA probe identification, in which a secondary structure prediction algorithm is employed to identify oligonucleotide sequences within an expressed gene having the requisite hairpin structure. Intuitively, such probes should have significantly improved performance over "traditional" hairpin probes, because they are fully complementary with the target. We present experimental evidence verifying this hypothesis for a series of hairpin probes targeting the pag gene of Bacillus anthracis.

[Amino-modified probes with immobilized linkers and proteins for atomic force microscopy].

Functionalized by bovine serum albumin (BSA) probes for atomic force microscopy (AFM) which can be used for molecular recognition studies has been obtained. Modification and functionalization procedure of AFM probe includes three stages. First, amino probes were obtained by modification in vapors of amino silane derivative. Then surface amino groups of the amino probe interacted with homobifunctional amino reactive crosslinker. And finally, the probe with covalently attached crosslinker was functionalized by BSA molecules. Obtained AFM probes were characterized on the different stages of the modification by force measurements and the adhesion forces were determined. Process of modification was confirmed by visualization of BSA and supercoiled pGEMEX DNA molecules immobilized on the standard amino mica and amino mica modified by crosslinker.

Silver nanoparticle-based ultrasensitive chemiluminescent detection of DNA hybridization and single-nucleotide polymorphisms.

A new nanoparticle-based chemiluminescent (CL) method has been developed for the ultrasensitive detection of DNA hybridization. The assay relies on a sandwich-type DNA hybridization in which the DNA targets are first hybridized to the captured oligonucleotide probes immobilized on polystyrene microwells and then the silver nanoparticles modified with alkylthiol-capped oligonucleotides are used as probes to monitor the presence of the specific target DNA. After being anchored on the hybrids, silver nanoparticles are dissolved to Ag+ in HNO3 solution and sensitively determined by a coupling CL reaction system (Ag+-Mn2+-K2S2O8-H3PO4-luminol). The combination of the remarkable sensitivity of the CL method with the large number of Ag+ released from each hybrid allows the detection of specific sequence DNA targets at levels as low as 5 fM. The sensitivity increases 6 orders of magnitude greater than that of the gold nanoparticle-based colorimetric method and is comparable to that of surface-enhanced Raman spectroscopy, which is one of the most sensitive detection approaches available to the nanoparticle-based detection for DNA hybridization. Moreover, the perfectly complementary DNA targets and the single-base mismatched DNA strands can be evidently differentiated through controlling the temperature, which indicates that the proposed CL assay offers great promise for single-nucleotide polymorphism analysis.

Controlled loading of oligodeoxyribonucleotide monolayers onto unoxidized crystalline silicon; fluorescence-based determination of the surface coverage and of the hybridization efficiency; parallel imaging of the process by Atomic Force Microscopy.

Unoxidized crystalline silicon, characterized by high purity, high homogeneity, sturdiness and an atomically flat surface, offers many advantages for the construction of electronic miniaturized biosensor arrays upon attachment of biomolecules (DNA, proteins or small organic compounds). This allows to study the incidence of molecular interactions through the simultaneous analysis, within a single experiment, of a number of samples containing small quantities of potential targets, in the presence of thousands of variables. A simple, accurate and robust methodology was established and is here presented, for the assembling of DNA sensors on the unoxidized, crystalline Si(100) surface, by loading controlled amounts of a monolayer DNA-probe through a two-step procedure. At first a monolayer of a spacer molecule, such as 10-undecynoic acid, was deposited, under optimized conditions, via controlled cathodic electrografting, then a synthetic DNA-probe was anchored to it, through amidation in aqueous solution. The surface coverage of several DNA-probes and the control of their efficiency in recognizing a complementary target-DNA upon hybridization were evaluated by fluorescence measurements. The whole process was also monitored in parallel by Atomic Force Microscopy (AFM).

Morphological studies of oligodeoxyribonucleotides probes covalently immobilized at polystyrene modified surfaces.

The immobilization of short ss-DNA (18- and 36-mer) and their hybridization were studied at gold and glassy carbon substrates modified with low molecular weight (approximately 12, 18 and 24 kg/mol) polystyrene thin films. Amino-modified DNA was attached to the surface by reaction with succinimide ester groups bound to the polystyrenes. A ferrocene modified DNA target was used to confirm the probe-target hybridization. Atomic force microscopy studies showed significant morphological changes after probe immobilization and hybridization compared to the featureless structure of the polystyrene film. Single-stranded DNA samples had a globular morphology with an average density of 3.8 and 2.2 (x 10(11)) globules/cm2 for the 18- and 36-mer, respectively. The formation of a porous structure with a 2.0 and 1.0 (x10(11)) average pore density corresponding to the 18- and 36-mer was observed after hybridization. A surface composition analysis was done by X-ray photoelectron spectroscopy to confirm and support the images interpretation. Ferrocene oxidation (+323 mV/18-mer, +367 mV/36-mer, versus Ag/AgCl) proved the presence of ds-DNA at the modified surfaces.

Colloidal interactions and self-assembly using DNA hybridization.

The specific binding of complementary DNA strands has been suggested as an ideal method for directing the controlled self-assembly of microscopic objects. We report the first direct measurements of such DNA-induced interactions between colloidal microspheres, as well as the first colloidal crystals assembled using them. The interactions measured with our optical tweezer method can be modeled in detail by well-known statistical physics and chemistry, boding well for their application to directed self-assembly. The microspheres' binding dynamics, however, have a surprising power-law scaling that can significantly slow annealing and crystallization.

The application of ultrasound as a rapid method to provide DNA fragments suitable for detection by DNA biosensors.

Contamination of food and water supplies by microorganisms such as Escherichia coli, the need for point-of-care bedside analysis of biological samples, and concerns about terrorist attacks using biological organisms, have made the development of fast, reliable, and sensitive analytical methodologies for use in monitoring of pathogens very important. With a variety of biosensors being developed for extremely sensitive and rapid nucleic acid diagnostics, it has become even more important to shift focus towards creation of methods to decrease the amount of time and effort necessary for sample preparation. The application of ultrasound has the potential to create DNA fragments from genomic material with lengths that are suitable for determination using biosensors and microarrays. For example, application of 85 W power at a frequency of 20 kHz can produce a preponderance of fragments of 100-400 base pairs (bp) within several seconds, and sample processing can lead to over 75% conversion from genomic material to fragments in times of 20-30 s. A proportion of these fragments are in a single-stranded state and are suitable for hydridization with immobilized single-stranded DNA probe oligonucleotides using a fiber optic biosensor. Control of factors such as salt concentration, exposure time, ultrasound power, and the initial temperature of the solution, can affect the length and form (single- or double-stranded) of DNA fragments that are generated by ultrasound, and average fragment length can be adjusted by selection of these operating parameters.

Liquid phase SPR imaging experiments for biosensors applications.

Surface plasmon resonance (SPR) has recently gained attention as a label-free method for the detection of biological molecules binding onto functionalised surfaces. It is one of the most sensitive detection method for monitor variations in the thickness and refractive index in ultra-thin films. Here, the adsorption processes of oligonucleotides onto gold substrates have been investigated in aqueous buffer solution using SPR imaging measurements. The hybridization of a thiol-modified, single stranded oligonucleotide anchored to a gold surface via thiol group, with its complementary sequence has been observed and characterised monitoring the hybridization process by SPR equipment. In situ investigation of smallest changes in SPR imaging measurements dynamically performed in liquid phase in the presence of DNA complementary probes was performed. Infrared spectroscopy and scanning electron microscopy characterisation of the functionalised gold surfaces of the biosensor were compared with the images obtained by SPR experimental apparatus.