Effect of oil pulling on the Streptococcus mutans concentation in plaque around orthodontic brackets -A prospective clinical study.

INTRODUCTION: Fixed orthodontic appliances create areas of plaque stagnation leading to an increase in the volume, structure, and composition of plaque. This increases the chances of decalcification and white spot lesions. Oil pulling, an ancient practice involving swishing oil in the mouth, has demonstrated a significant reduction in plaque scores after 45 days, and a reduction in salivary Streptococcus mutans concentration in few studies done in nonorthodontic subjects. The aim was to compare the concentration of S. mutans in plaque around orthodontic brackets in patients using oil pulling with sesame oil and those on routine oral hygiene. SUBJECTS AND METHODS: Twenty subjects requiring fixed orthodontic treatment were divided into two equal groups: Group A-Oil pulling and Group B-Control. All subjects were instructed to follow common oral hygiene methods and in addition, Group A was instructed to perform oil pulling for 30 days starting 1 month after placement of fixed appliances. Plaque specimens were collected from labial surfaces of maxillary lateral incisors and quantification of S. mutans was done using real-time polymerase chain reaction. Mean and standard deviations for descriptive statistics, paired, and unpaired sample t-tests were analyzed. RESULTS: Comparison of S. mutans concentration between T1 and T2 demonstrated a significant difference in both control and study groups. The experimental group showed significantly lesser S. mutans concentration compared to the control group. CONCLUSIONS: Oil-pulling therapy with sesame oil resulted in a statistically significant reduction in the concentration of S. mutans in the plaque around orthodontic brackets.

Synthesis and Characterization of a Sustained Nitric Oxide-Releasing Orthodontic Elastomeric Chain for Antimicrobial Action.

The acidic byproducts of bacteria in plaque around orthodontic brackets contribute to white spot lesion (WSL) formation. Nitric oxide (NO) has antibacterial properties, hindering biofilm formation and inhibiting the growth of oral microbes. Materials that mimic NO release could prevent oral bacteria-related pathologies. This study aims to integrate S-nitroso-acetylpenicillamine (SNAP), a promising NO donor, into orthodontic elastomeric ligatures, apply an additional polymer coating, and evaluate the NO-release kinetics and antimicrobial activity against Streptococus mutans. SNAP was added to clear elastomeric chains (8 loops, 23 mm long) at three concentrations (50, 75, 100 mg/mL, and a control). Chains were then coated, via electrospinning, with additional polymer (Elastollan®) to aid in extending the NO release. NO flux was measured daily for 30 days. Samples with 75 mg/mL SNAP + Elastollan® were tested against S. mutans for inhibition of biofilm formation on and around the chain. SNAP was successfully integrated into ligatures at each concentration. Only the 75 mg/mL SNAP chains maintained their elasticity. After polymer coating, samples exhibited a significant burst of NO on the first day, exceeding the machine's reading capacity, which gradually decreased over 29 days. Ligatures also inhibited S. mutans growth and biofilm formation. Future research will assess their mechanical properties and cytotoxicity. This study presents a novel strategy to address white spot lesion (WSL) formation and bacterial-related pathologies by utilizing nitric oxide-releasing materials. Manufactured chains with antimicrobial properties provide a promising solution for orthodontic challenges, showing significant potential for academic-industrial collaboration and commercial viability.

Application of an Antibacterial Coating Layer via Amine-Terminated Hyperbranched Zirconium-Polysiloxane for Stainless Steel Orthodontic Brackets.

The massive growth of various microorganisms on the orthodontic bracket can form plaques and cause diseases. A novel amine-terminated hyperbranched zirconium-polysiloxane (HPZP) antimicrobial coating was developed for an orthodontic stainless steel tank (SST). After synthesizing HPZP and HPZP-Ag coatings, their structures were characterized by nuclear magnetic resonance spectroscopy, scanning electron microscopy, thickness measurement, contact angle detection, mechanical stability testing, and corrosion testing. The cell toxicity of the two coatings to human gingival fibroblasts (hGFs) and human oral keratinocytes (hOKs) was detected by cell counting kit eight assays, and SST, HPZP@SST, and HPZP-Ag@SST were cocultured with Staphylococcus aureus, Escherichia coli, and Streptococcus mutans for 24 hr to detect the antibacterial properties of the coatings, respectively. The results show that the coatings are about 10 µm, and the water contact angle of HPZP coating is significantly higher than that of HPZP-Ag coating (P < 0.01). Both coatings can be uniformly and densely distributed on SST and have good mechanical stability and corrosion resistance. The cell counting test showed that HPZP coating and HPZP-Ag coating were less toxic to cells compared with SST, and the toxicity of HPZP-Ag coating was greater than that of HPZP coating, with the cell survival rate greater than 80% after 72 hr cocultured with hGFs and hOKs. The antibacterial test showed that the number of bacteria on the surface of different materials was ranked from small to large: HPZP@SST < HPZP-Ag@SST < SST and 800 µg/mL HPZP@SST showed a better bactericidal ability than 400 µg/mL after cocultured with S. aureus, E. coli, and S. mutans, respectively (all P < 0.05). The results showed that HPZP coating had a better effect than HPZP-Ag coating, with effective antibacterial and biocompatible properties, which had the potential to be applied in orthodontic process management.

Use of Antimicrobial Silver Coatings on Fixed Orthodontic Appliances, Including Archwires, Brackets, and Microimplants: A Systematic Review.

Orthodontic treatments, while essential for achieving optimal oral health, present challenges in infection control due to the propensity for bacterial adhesion and biofilm formation on orthodontic appliances. Silver-coated orthodontic materials have emerged as a promising solution, leveraging the potent antimicrobial properties of silver nanoparticles (AgNPs). Antibacterial coatings are used in orthodontics to prevent the formation of bacterial biofilms. This systematic review evaluated the literature on antimicrobial silver coatings on fixed orthodontic appliances, including archwires, brackets, and microimplants. Two evaluators, working independently, rigorously conducted a comprehensive search of various databases, including PubMed, PubMed Central, Embase, Scopus and Web of Science. This systematic review comprehensively examined in vitro studies investigating the antimicrobial efficacy of silver-coated orthodontic archwires, brackets, and microimplants. The review registered in PROSPERO CRD42024509189 synthesized findings from 18 diverse studies, revealing consistent and significant reductions in bacterial adhesion, biofilm formation, and colony counts with the incorporation of AgNPs. Key studies demonstrated the effectiveness of silver-coated archwires and brackets against common oral bacteria, such as Streptococcus mutans and Staphylococcus aureus. Microimplants coated with AgNPs also exhibited notable antimicrobial activity against a range of microorganisms. The systematic review revealed potential mechanisms underlying these antimicrobial effects, highlighted implications for infection prevention in orthodontic practice, and suggested future research avenues. Despite some study heterogeneity and limitations, the collective evidence supports the potential of silver-coated orthodontic materials in mitigating bacterial complications, emphasizing their relevance in advancing infection control measures in orthodontics.

Mechanical and microbiological properties of orthodontic resin modified with nanostructured silver vanadate decorated with silver nanoparticles (ßAgVO3).

OBJECTIVE: To investigate the impact of incorporating the antimicrobial nanomaterial ß-AgVO3 into orthodontic resin, focusing on degree of conversion, surface characteristics, microhardness, adhesion properties, and antimicrobial activity. METHODS: The 3 M Transbond XT resin underwent modification, resulting in three groups (Control, 2.5% addition, 5% addition) with 20 specimens each. Fourier transform infrared spectroscopy assessed monomer conversion. Laser confocal microscopy examined surface roughness, and microhardness was evaluated using Knoop protocols. Shear strength was measured before and after artificial aging on 36 premolar teeth. Microbiological analysis against S. mutans and S. sanguinis was conducted using the agar diffusion method. RESULTS: Degree of conversion remained unaffected by time (P = 0.797), concentration (P = 0.438), or their interaction (P = 0.187). The 5% group exhibited the lowest surface roughness, differing significantly from the control group (P = 0.045). Microhardness showed no significant differences between concentrations (P = 0.740). Shear strength was highest in the control group (P < 0.001). No significant differences were observed in the samples with or without thermocycling (P = 0.759). Microbial analysis revealed concentration-dependent variations, with the 5% group exhibiting the largest inhibition halo (P < 0.001). CONCLUSIONS: Incorporating ß-AgVO3 at 2.5% and 5% concentrations led to significant differences in surface roughness, adhesion, and antimicrobial activity. Overall, resin modification positively impacted degree of conversion, surface characteristics, microhardness, and antimicrobial activity. Further research is warranted to determine clinically optimal concentrations that maximize antimicrobial benefits while minimizing adverse effects on adhesion properties. CLINICAL SIGNIFICANCE: Incorporating ß-AgVO3 into orthodontic resin could improve patient quality of life by prolonging intervention durability and reducing the impact of cariogenic microorganisms. The study's findings also hold promise for the industry, paving the way for the development of new materials with antimicrobial properties for potential applications in the health sector.

Orthodontic adhesive loaded with different proportions of ZrO2 silver-doped nanoparticles: An in vitro µTBS, SEM, EDX, FTIR, and antimicrobial analysis.

Zirconium dioxide silver-doped nanoparticles (ZrO2AgDNPs) impacts the adhesive material in terms of its physical characteristics, antimicrobial properties, degree of conversion (DC), and micro-tensile bond strength (µTBS) of orthodontic brackets to the enamel surface. A comprehensive methodological analysis utilizing a range of analytical techniques, including scanning electron microscopy coupled with energy-dispersive x-ray spectroscopy (EDX), Fourier-transform infrared (FTIR) spectroscopy, DC analysis, and µTBS testing. A light-curable orthodontic adhesive, specifically Transbond XT, was combined with ZrO2AgDNPs at 2.5% and 5%. As a control, an adhesive with no incorporation of ZrO2AgDNPs was also prepared. The tooth samples were divided into three groups based on the weightage of NPs: group 1: 0% ZrO2AgDNPs (control), group 2: 2.5 wt% ZrO2AgDNPs, and group 3: 5 wt% ZrO2AgDNPs. EDX graph demonstrated silver (Ag), Zirconium (Zr), and Oxygen (O2), The antibacterial efficacy of adhesives with different concentrations of NPs (0%, 2.5%, and 5%) was assessed using the pour plate method. The FTIR spectra were analyzed to identify peaks at 1607 cm-1 corresponding to aromatic CC bonds and the peaks at 1638 cm-1 indicating the presence of aliphatic CC bonds. The µTBS was assessed using universal testing machine (UTM) and bond failure of orthodontic brackets was seen using adhesive remanent index (ARI) analysis. Kruskal-Wallis test assessed the disparities in survival rates of Streptococcus mutans. Analysis of variance (ANOVA) and post hoc Tukey multiple comparisons test calculated µTBS values. The lowest µTBS was observed in group 1 adhesive loaded with 0% ZrO2AgDNPs (21.25 ± 1.22 MPa). Whereas, the highest µTBS was found in group 3 (26.19 ± 1.07 MPa) adhesive loaded with 5% ZrO2AgDNPs. ZrO2AgDNPs in orthodontic adhesive improved µTBS and has acceptable antibacterial activity against S mutans. ZrO2AgDNPs at 5% by weight can be used in orthodontic adhesive alternative to the conventional method of orthodontic adhesive for bracket bonding. RESEARCH HIGHLIGHTS: The highest µTBS was found in orthodontic adhesive loaded with 5% ZrO2AgDNPs. ARI analysis indicates that the majority of the failures fell between 0 and 1 among all investigated groups. The colony-forming unit count of S. mutans was significantly less in orthodontic adhesive loaded with nanoparticles compared with control. The 0% ZrO2AgDNPs adhesive showed the highest DC.

A novel antibacterial and fluorescent coating composed of polydopamine and carbon dots on the surface of orthodontic brackets.

Many kinds of antibacterial coatings have been designed to prevent the adherence of bacteria onto the surface of a fixed orthodontic device of brackets. However, the problems such as weak binding force, undetectable, drug resistance, cytotoxicity and short duration needed to be solved. Thus, it has great value in developing novel coating methods with long-term antibacterial and fluorescence properties according to the clinical application of brackets. In this study, we synthesized blue fluorescent carbon dots (HCDs) using the traditional Chinese medicinal honokiol, which could cause irreversible killing effects on both gram-positive and gram-negative bacteria through positive charges on the surface and inducing reactive oxygen species (ROS) production. Based on this, the surface of brackets was serially modified with polydopamine and HCDs, taking advantage of the strong adhesive properties as well as the negative surface charge of polydopamine particles. It is found that this coating exhibits stable antibacterial properties in 14 days with good biocompatibility, which can provide a new solution and strategy to solve the series of hazards caused by bacterial adhesion on the surface of orthodontic brackets.

The bactericidal and biofilm removal effect of super reducing water on Streptococcus mutans in three types of orthodontic brackets.

PURPOSE: To investigate the bactericidal and biofilm removal effect of super reducing water (SRW) on Streptococcus mutans (S. mutans) adhered to orthodontic brackets, in vitro. METHODS: Three types of brackets were bonded to aluminum disks. After the formation of S. mutans biofilms on the surfaces, the brackets were divided into three groups (n = 44 each) based on their exposure to SRW: group 1, no treatment; group 2, treated for 5 min; and group 3, treated for 10 min. Total viable counts, adenosine triphosphate measurements, crystal violet assay, and scanning electron microscopy were used to evaluate the effect of SRW. RESULTS: The bacterial counts in groups 2 and 3 were significantly lower than those in group 1 (P < 0.001); however, no significant differences were observed between groups 2 and 3. Marked decreases in the number of bacterial colonies and extent of biofilm formation were observed in groups 2 and 3 compared to group 1. No significant differences in the number of bacterial colonies and amount of biofilm were observed among the three types of brackets in each group. CONCLUSION: These findings indicate the bactericidal and biofilm removal effect of SRW treatment on S. mutans adhered to orthodontic brackets.

Gold-oxoborate nanocomposite-coated orthodontic brackets gain antibacterial properties while remaining safe for eukaryotic cells.

The study's main objective is to limit bacterial biofilm formation on fixed orthodontic appliances. Bacterial biofilm formation on such devices (e.g., brackets) causes enamel demineralization, referred to as white spot lesions (WSL). WSL is significant health, social and economic problem. We provide a nanotechnology-based solution utilizing a nanocomposite of gold nanoparticles embedded in a polyoxoborate matrix (BOA: B-boron, O-oxygen, A-gold, Latin aurum). The nanocomposite is fully inorganic, and the coating protocol is straightforward, effective, and ecologically friendly (low waste and water-based). Prepared coatings are mechanically stable against brushing with a toothbrush (up to 100 min of brushing). Bacteria adhesion and antibacterial properties are tested against Streptococcus mutans-common bacteria in the oral cavity. BOA reduces the adhesion of bacteria by around 78%, that is, from around 7.99 × 105  ± 1.33 × 105  CFU per bracket to 1.69 × 105  ± 3.07 × 104  CFU per bracket of S. mutans detached from unmodified and modified brackets, respectively. Modified fixed orthodontic brackets remain safe for eukaryotic cells and meet ISO 10993-5:2009 requirements for medical devices. The gathered data show that BOA deposited on orthodontic appliances provides a viable preventive measure against bacteria colonization, which presents frequent and significant complications of orthodontic treatment.

Study on the role of nano antibacterial materials in orthodontics (a review).

Nanoparticles (NPs) are insoluble particles with a diameter of fewer than 100 nanometers. Two main methods have been utilized in orthodontic therapy to avoid microbial adherence or enamel demineralization. Certain NPs are included in orthodontic adhesives or acrylic resins (fluorohydroxyapatite, fluorapatite, hydroxyapatite, SiO2, TiO2, silver, nanofillers), and NPs (i.e., a thin layer of nitrogen-doped TiO2 on the bracket surfaces) are coated on the surfaces of orthodontic equipment. Although using NPs in orthodontics may open up modern facilities, prior research looked at antibacterial or physical characteristics for a limited period of time, ranging from one day to several weeks, and the limits of in vitro studies must be understood. The long-term effectiveness of nanotechnology-based orthodontic materials has not yet been conclusively confirmed and needs further study, as well as potential safety concerns (toxic effects) associated with NP size.

Self-ligating brackets exhibit accumulation of high levels of periodontopathogens in gingival crevicular fluid.

Different types of brackets seem to influence the disruption of the oral microbial environment. Therefore, the aim of this study was to evaluate the influence of self-ligating brackets on the gingival crevicular fluid levels of the putative periodontal pathogens Aggregatibacter actinomycetemcomitans sorotype a (Aaa), Tannerella forsythia, Fusobacterium nucleatum, and Porphyromonas gingivalis. Sixty samples of crevicular fluid of twenty patients (11 boys and 9 girls) were analysed at baseline (T0) and after 30 (T1) and 60 (T2) days of bonding of the self-ligating (In-Ovation®R, Dentsply, GAC or SmartClip™, 3 M Unitek, Monrovia, CA, USA) and of one conventional bracket (Gemini™, 3 M Unitek, Monrovia, CA, USA) used with elastomeric ligatures. Total DNA from samples was extracted using CTAB-DNA precipitation method and Real-time PCR was performed to analyse bacterial level. Non-parametric Friedman and Wilcoxon tests were used for data analysis (p value of < 0.05). F. nucleatum presented a different level among the different brackets at T1 (p = 0.025), the highest level in the Gemini™ bracket when compared to the SmartClip™ bracket (p = 0.043). P. ginigvalis levels increased in the In-Ovation®R (p = 0.028) at T1. The subgingival levels of bacterial species associated with periodontal disease P. ginigvalis increased in the self-ligating brackets In-Ovation®R.Clinical Relevance: Some kinds of brackets could provide more retentive sites than others, and it seems to modulate the subgingival microbiota, since, in this study, we could observe the increase of the species associated with periodontal disease. Preventive protocols should be adopted in the use of self-ligating brackets.

Enhanced reduction of polymicrobial biofilms on the orthodontic brackets and enamel surface remineralization using zeolite-zinc oxide nanoparticles-based antimicrobial photodynamic therapy.

The aim of this study was to evaluate the anti-biofilm and anti-metabolic activities of zeolite-zinc oxide nanoparticles (Zeo/ZnONPs)-based antimicrobial photodynamic therapy (aPDT) against pre-formed polymicrobial biofilms on the orthodontic brackets, as well as, assess the remineralization efficacy on polymicrobial biofilms induced enamel lesions. Following synthesis and characterization of Zeo/ZnONPs, cell cytotoxicity, hemolytic effect, and intracellular reactive oxygen species (ROS) production were determined. The anti-biofilm and anti-metabolic activities of aPDT using different concentrations of Zeo/ZnONPs were investigated. Microhardness tester and DIAGNOdent Pen were used to evaluate the changes of remineralization degree on the treated enamel slabs duration 1 and 3 months. No significant cytotoxicity and erythrocyte hemolysis were observed in treated cells with Zeo/ZnONPs. When irradiated, suggesting that the Zeo/ZnONPs were photoactivated, generating ROS and leading to reduce dose-dependently the cell viability and metabolic activity of polymicrobial biofilms. Also, the enamel surface microhardness value of exposed enamel showed a steady increase with the concentration of Zeo/ZnONPs. No statistically significant differences were shown between aPDT and sodium fluoride varnish as the control group. Overall, Zeo/ZnONPs-based aPDT with the greatest remineralization efficacy of enamel surface can be used as an anti-biofilm therapeutic method, which is involved with their potent ability to produce ROS.

Green tea extract solutions can control bacterial biofilms formed on space maintainers.

BACKGROUND: Microorganisms in the mouth are protected from negative environmental conditions by forming biofilms; however, the use of anti-plaque agents in children is not preferred due to toxic side effects. Green tea has been reported to have anti-microbial and anti-dental caries properties. AIMS: The aim of this study was to assess the ability of green tea extract to prevent the formation of biofilm on the teeth of children using space maintainers. METHODS: Bacteria were isolated from samples obtained from children aged between 8 and 10 years. The micro-titer plate method and Congo red agar were used to assay biofilm formation. Green tea leaves were obtained from Rize, Turkey. Methanol, hexane and distilled water were used for preparing the extracts. The effects of green tea extract and chlorhexidine on biofilm formation were examined using scanning electron microscopy. RESULTS: Presence of S. mutans 3,3, S. anginosus 2.1.b, S. dysgalactie 6.1.4.1, and E. faecium 10.2. was measured in the biofilm samples. The extracts showed a bacteriostatic effect on the test bacteria, and among the green tea extracts, the methanol extract was found to exhibit the highest efficacy against biofilm formation by S. mutans 3.3. CONCLUSION: Green tea extract showed good efficacy in controlling bacterial growth, and is recommended as a better-tasting alternative for daily oral hygiene due to a lack of known side effects.

Real-time polymerase chain reaction quantification of the salivary levels of cariogenic bacteria in patients with orthodontic fixed appliances.

AIM: The aim was to investigate the salivary detection frequencies and quantities of caries-associated bacteria from patients with orthodontic brackets. METHODS: Patients wearing orthodontic brackets (n = 40, mean age = 26 years) and healthy controls without brackets (n = 40, mean age = 17 years) were enrolled in the study. Saliva samples from each patient was collected. After DNA purification, target species comprising streptococci and a Lactobacillus species were detected and quantified from the samples using polymerase chain reaction (PCR) and real-time quantitative PCR. RESULTS: Detection frequencies did not differ between the orthodontic patients and the control subjects for any target species except for Streptococcus sobrinus, which showed significantly lower detection rates in orthodontic patients (p < .05). Lactobacillus casei and Streptococcus gordonii were found at the highest detection frequencies with both species being detected in 38 (95%) of the saliva samples of orthodontic patients. Similarly, L. casei and Streptococcus salivarius were the species with highest detection frequencies (35, 87.5%) in the control subjects. Real-time PCR revealed that Streptococcus mutans and S. salivarius quantities were significantly higher in orthodontic patients than in the control subjects (p < .05). CONCLUSIONS: Application of orthodontic brackets for 12 months leads to increased salivary levels of cariogenic bacteria and may serve as a potential risk factor for caries initiation.

An in vitro evaluation of the effects of nanoparticles on shear bond strength and antimicrobial properties of orthodontic adhesives: A systematic review and meta-analysis study.

INTRODUCTION: Biofilm accumulation around orthodontic brackets and composite is a common complication of orthodontic treatment. OBJECTIVE: A systematic review and meta-analysis were done to find out whether the association of nanoparticles with the orthodontic adhesives compromises its properties and whether there are exceptional nanoparticles exhibiting excellent antimicrobial potential against cariogenic bacteria along with remarkable mechanical properties. MATERIALS AND METHODS: Electronic databases were searched using the following keywords; orthodontic or orthodontics and antimicrobial or antibacterial and adhesive and nanoparticles and shear bond strength. Thirteen studies were included and meta-analysis was performed. RESULTS: The results indicated no drastic changes in mechanical properties (0.812, 95% CI [0.750, 0.861], P=0.000). The Ag-HA, Cur, Cur-ZnO, and TiO2 in concentration≥1% showed a statistically significant difference, where the control groups had higher shear bond strength. Nine studies assessed the antimicrobial properties of nanoparticles. 1 wt% Cu and 5 wt% TiO2 not only did not affect shear bond strength but also showed more antimicrobial activity against Streptococcus mutans. The analysis demonstrated the absence of heterogeneity (Q value=44.014; df (Q)=12; and I2=72.736) in shear bond strength of orthodontic adhesives with nanoparticles, with low risk of bias. CONCLUSIONS: Adding≤5 wt% antimicrobial nanoparticles to an orthodontic adhesive is less conducive to microbial growth than unmodified adhesive and does not influence bracket-enamel bond strength.

Hydrogel-Coated Dental Device with Adhesion-Inhibiting and Colony-Suppressing Properties.

Bacterial infection is the main cause of implantation failure worldwide, and the importance of antibiotics on medical devices has been undermined because of antibiotic resistance. Antimicrobial hydrogels have emerged as a promising approach to combat infections associated with medical devices and wound healing. However, hydrogel coatings that simultaneously possess both antifouling and antimicrobial attributes are scarce. Herein, we report an antimicrobial hydrogel that incorporates adhesion-inhibiting polyethylene glycol (PEG) and colony-suppressing chitosan (CS) as a dressing to combat bacterial infections. These two polymers have important environmentally benign characteristics including low toxicity, low volatility, and biocompatibility. Although hydrogels containing PEG and CS have been reported for applications in the fields of wound dressing, tissue repair, water purification, drug delivery, and scaffolds for bone regeneration, there still has been no report on the application of CS/PEG hydrogel coatings in dental applications. Herein, this biointerface shows superior activity in early-stage adhesion inhibition (98.8%, 5 h) and displays remarkably long-lasting colony-suppression activity (93.3%, 7 d). Thus, this novel nanomaterial, which has potential as a dual-functional platform with integrated antifouling and antimicrobial functions with excellent biocompatibility, might be used as a safe and effective antimicrobial coating in biomedical device applications.

Quantitative analysis of biofilm formation on labial and lingual bracket surfaces.

OBJECTIVES: To evaluate and compare the biofilm formation between labial and lingual orthodontic brackets. MATERIALS AND METHODS: Twenty patients with a mean age of 24 ± 8.8 who had received labial or lingual orthodontic treatment were enrolled in the study. Biofilm formation on 80 brackets was analyzed quantitatively with the Rutherford backscattering detection method. Five micrographs were obtained per bracket with views from the vestibule/lingual, mesial, distal, gingival, and occlusal aspects. Quantitative analysis was carried out with surface analysis software (ImageJ 1.48). Data were analyzed by Mann-Whitney U and Kruskal-Wallis tests (α = 0.05). RESULTS: Total biofilm formation was 41.56% (min 29.43% to max 48.76%) on lingual brackets and 26.52% (min 21.61% to max 32.71%) on labial brackets. Differences between the two groups were found to be significant. No difference was observed in intraoral location. The biofilm accumulation was mostly located on gingival, mesial, and distal surfaces for both groups. CONCLUSIONS: The biofilm accumulation on lingual orthodontic therapy was found to be more than labial orthodontic therapy.

Antibacterial Effects of Orthodontic Primer Harboring Chitosan Nanoparticles against the Multispecies Biofilm of Cariogenic Bacteria in a Rat Model.

INTRODUCTION: Microbial biofilm accumulation around orthodontic brackets and composite is a common complication of fixed orth-odontic treatment. This study assessed the antibacterial effects of orthodontic primer containing chitosan nanoparticles (CNPs) against the multispecies biofilm of cariogenic bacteria in а rat model. MATERIALS AND METHODS: Transbond XT orthodontic primer containing 0%, 1%, 5%, and 10% CNPs was experimentally prepared. The Wistar rats were randomly divided into four groups (n=7) of control (0% CNPs), 1%, 5% and 10% CNPs. The oral cavities of the rats were infected with cariogenic bacteria. After anesthetizing the rats, 1 drop (10 µL) of primer with different concentrations of CNPs was applied to their central incisor and light-cured for 20 seconds. Transbond XT orthodontic adhesive (2 × 2 mm) was applied on the primer. Another drop (10 µL) of primer was applied and light-cured for 40 seconds. The number of Streptococcus mutans, Streptococcus sanguinis, and Lactobacillus acidophilus colonies in the saliva of rats was quantified at 24 hours, 4 days and 7 days. RESULTS: Adding 1% (p=0.005), 5% (p<0.001) and 10% (p<0.001) of CNPs to orthodontic primer significantly reduced the S. mutans colony count at 24 hours compared with the control group. At 24 hours, the mean S. sanguinis colony counts in the 5% (p=0.04) and 10% (p=0.02) CNP groups were significantly lower than that in the control group. Also, at 4 and 7 days, the mean colony counts in the 5% and 10% CNP groups were significantly lower than that in the control group (p<0.05). At 24 hours and 4 days, the mean L. acidophilus colony count in the 10% CNP group was significantly lower than that in the control group (p<0.05). At 7 days, rats with failed adhesive showed a significantly higher count of all three bacteria compared with rats with adhesive (p<0.05). CONCLUSIONS: The addition of 5% CNPs to orthodontic primer significantly decreased the colony count of cariogenic bacteria in rats.

Microbial species associated with dental caries found in saliva and in situ after use of self-ligating and conventional brackets.

OBJECTIVES: Enamel demineralization is among the main topics of interest in the orthodontic field. Self-ligating brackets have been regarded as advantageous in this aspect. The aim of this study was to evaluate the break homeostasis in the oral environment and the levels of microorganisms associated with dental caries among the different types of brackets. MATERIAL AND METHODS: Twenty patients received two self-ligating brackets: In-Ovation®R, SmartClipTM, and one conventional GeminiTM. Saliva was collected before bonding (S0), 30 (S1) and 60 (S2) days after bonding. One sample of each bracket was removed at 30 and 60 days for the in situ analysis. Checkerboard DNA-DNA Hybridization was employed to evaluate the levels of microbial species as-sociated with dental caries. Data were evaluated by nonparametric Friedman and Wilcoxon tests at 5% significance level. RESULTS: The salivary levels of L. casei (p=0.033), S. sobrinus (p=0.011), and S. sanguinis (p=0.004) increased in S1. The in situ analyses showed alteration in S. mutans (p=0.047), whose highest levels were observed to the In-Ovation®R. CONCLUSIONS: The orthodontic appliances break the salivary homeostasis of microorganisms involved in dental caries. The contamination pattern was different between self-ligating and conventional brackets. The In-Ovation®R presented worse performance considering the levels of cariogenic bacterial species.

Comparison of intraoral biofilm reduction on silver-coated and silver ion-implanted stainless steel bracket material : Biofilm reduction on silver ion-implanted bracket material.

PURPOSE: The objective of this in situ study was to quantify the intraoral biofilm reduction on bracket material as a result of different surface modifications using silver ions. In addition to galvanic silver coating and physical vapor deposition (PVD), the plasma immersion ion implantation and deposition (PIIID) procedure was investigated for the first time within an orthodontic application. MATERIALS AND METHODS: An occlusal splint equipped with differently silver-modified test specimens based on stainless steel bracket material was prepared for a total of 12 periodontally healthy patients and was worn in the mouth for 48 h. The initially formed biofilm was fluorescently stained and a quantitative comparative analysis of biofilm volume, biofilm surface coverage and live/dead distribution of bacteria was performed by confocal laser scanning microscopy (CLSM). RESULTS: Compared to untreated stainless steel bracket material, the antibacterial effect of the PIIID silver-modified surface was just as significant with regard to reducing the biofilm volume and the surface coverage as the galvanically applied silver layer and the PVD silver coating. Regarding the live/dead distribution, however, the PIIID modification was the only surface that showed a significant increase in the proportion of dead cells compared to untreated bracket material and the galvanic coating. CONCLUSIONS: Orthodontic stainless steel with a silver-modified surface by PIIID procedure showed an effective reduction in the intraoral biofilm formation compared to untreated bracket material, in a similar manner to PVD and galvanic silver coatings applied to the surface. Additionally, the PIIID silver-modified surface has an increased bactericidal effect.